DNG conv. 8.2 /Panasonic DMC-GX 7/RW 2 files ?

Ver. 8.2 do not recognize RW 2 files from GX7. ( I use Elements 11 and Windows 7 )

Thank you for your answer, but I am even more confused!
I develop Raw files in Elements 11.
The DNG converter is located under  : program files(x86)/ Adobe (where also Elements 11 is stored )
With my former camera ( Panasonic DMC-GX 1 ) the development of Raw-files was performing without problems in Elements editing program.
The download of ver.8.2 is o.k. and was placed automatically in the same place as the former version. ( I re-downloaded a couple of times to be sure)
But  the converter do not read the files !
Fra: JimHess [email protected]
Sendt: 4. desember 2013 17:54
Til: ilangmoe
Emne: DNG conv. 8.2 /Panasonic DMC-GX 7/RW 2 files ?
Re: DNG conv. 8.2 /Panasonic DMC-GX 7/RW 2 files ?
created by JimHess <http://forums.adobe.com/people/JimHess>  in Digital Negative (DNG) - View the full discussion <http://forums.adobe.com/message/5899943#5899943

Similar Messages

  • Does Lightroom 3 support Panasonic DMC FZ200 RAW files?

    Does Lightroom 3 support Panasonic DMC FZ200 RAW files?  I think the update for LR 4.2 does.  But I still have LR 3 and do not wish to upgrade right now.

    Of course not.  The camera was announced 8 months after the last version of LR 3 came out.
    You could use the free DNG converter.

  • How do I open raw files from a Panasonic DMC-GF5 using Elements10 on a PC?

    How do I open RAW files from a Panasonic DMC-GF5 camera using Elements 10 on my PC?  When I try to open a Raw file I get a message 'wrong type of file'

    I believe you need ACR 7.1 which PSE10 cannot be updated to. 
    Use the DNG Converter to make DNGs from the RAW files and those should open in your older PSE version.
    You can also buy a newer version of PSE.  Perhaps do a Trial (Try) of PSE12 and see if PSE13 comes out in the next week or so.
    The DNG Converter can be found on this page:  http://www.adobe.com/downloads/updates
    PSE12 Trial: http://www.adobe.com/downloads.html

  • Can't read Panasonic DMC G5 RAW in Elements 8

    Transferring to new PC. Successfully installed elements 8 on new PC, but can't read RAW files for Panasonic DMC G5. Worked OK on old PC. Remember doing an update to solve this problem on old PC, but don't know what it was and can't find out what I need. Have tried Camera Raw 6.2 update without success. Any suggestions?

    The Panasonic G5 raws were first supported in ACR 7.2, which is only compatible with PSE11 and higher so it’s unclear what you were doing on the old computer that made it work, unless, maybe you converted your G5 raw files the DNGs with the DNG Converter and then they would have been compatible with the older ACR plug-in.
    References:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  • Panasonic DMC-LF1 RAW files and Elements 11

    Having just purchased Panasonic DMC-LF1 and after downloading the latest update for PS Elements 11, Elements still will not recognize the LF-1 RAW files. Please help.

    stein016
    You realize that installation of Camera Raw that supports your camera allows you only to import the raw file into Premiere Elements 11 project, not edit it there in the Camera Raw dialog. For that you need Photoshop Elements. All that being said...
    1. Premiere Elements 11 Camera Raw appears to be at 7.4. No updates beyond that so far under Help Menu/Updates or elsewhere.
    2. When I look in the Adobe Camera Raw Supported Camera list
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    I find "Panasonic DMC-LF1" which appears to need Camera Raw 8.1 which is not available to Premiere Elements 11 at this time.
    http://blogs.adobe.com/lightroomjournal/2013/06/camera-raw-8-1-and-dng-converter-8-1-now-a vailable.html
    Probably the people in the Photoshop Elements Forum may have a better perspective on when if ever this Camera Raw 8.1 will arrive and for what version 11 or the next version.
    Additional references if needed
    http://blogs.adobe.com/richardcurtis/?p=898
    http://blogs.adobe.com/lightroomjournal/2013/06/camera-raw-8-1-and-dng-converter-8-1-now-a vailable.html
    More later.
    ATR

  • Importing to LR3.3 from Panasonic DMC-ZS3

    Sorry if this has been addressed. I couldn't find anything about it.
    Windows 7 Pro, 64bit, LR3.3, 2-SanDisk 2gb cards, RAW USB 2.0 UDMA reader
    Ever  since upgrading to LR3.3 I have not been able to Import files (jpg)  from my wifes SD cards straight to LR. Her camera is a Panasonic  DMC-ZS3. Prior to LR 3.3, ie; 3.0 it worked fine. I can copy via  explorer to the hard drive then Import them to LR 3.3 without a problem.  OK, there is a problem. I use LR's automatic folder destination creator  by date taken, on import. It takes too much time to create all these  folders using explorer.
    The Import report says the files  were not imported because they could not be read but reads them fine  from my hard drive. It reads and imports the files from my Nikon (CF  card) fine also.
    Any ideas why LR 3.3 does not like these files anymore.
    Jim

    Jim,
    Bad card readers and/or USB connections (cables, ports, hubs) are known to cause issues like yours. Somehow, LR seems to be more affected by these problems than the O/S tools.
    jga154 wrote:
    I can copy via  explorer to the hard drive then Import them to LR 3.3 without a problem.  OK, there is a problem. I use LR's automatic folder destination creator  by date taken, on import. It takes too much time to create all these  folders using explorer.
    You could copy the files into ONE temporary folder via Explorer, and still use Copy/Move and LR's automatic folder creation by date.
    Beat Gossweiler
    Switzerland

  • Import from Panasonic DMC-FZ28 Lumix

    Trying to import from Panasonic DMC-FZ28 Lumix but the only import option is the
    in-built camera on my MPB (10.5.7).
    I can see the camera in the Finder window and can click on various photos.
    When the camera was connected to the USB port and select the setting as PC Connection.
    Is there something else I need to do in order for iMovie to see this camera ?
    Thank you,
    Jay

    If you are using iPhoto, import the photos into iPhoto. Then, in iMovie, start a new Project and name it (or open and old project). Open the Photo Browser in iMovie, and drag the photos in from there.
    If you are not using iPhoto, drag the jpegs from your camera to a folder in the Finder.
    Open iMovie. Start a new project and name it (or open and old project). Drag and drop the photos from the Finder window into your project.
    Message was edited by: AppleMan1958

  • HT202020 Using a SDHC card adapter I can import directly on my iPad2 videos (.mov) taken with a Panasonic DMC-ZS3. The same video files (same file format) imported in Aperture 3.3 cannot be synchronized with iPad. Is Aperture causing the problem?

    Using a SDHC card adapter I can import directly on my iPad2 videos (.mov) taken with a Panasonic DMC-ZS3. The same video files (same file format) imported in Aperture 3.3 cannot be synchronized with iPad. Is Aperture causing the problem?

    Oh, baby! This bad boy flies!! Here's what to expect:
    I had 40,000 images in Aperture 3 and it was dog slow at everything. I installed 3.1 update today. It took 5 minutes to update the database and then behaved marginally better than before at ASIC library navigation. I was disappointed.
    Then I QUIT the app. It took a couple of hours to "update files for sharing" with a counter that went to 110,000 images. So it must have updated every thumbnail and variation of preview. Turned it back on , and BAM. Came up fully in seconds. Paused for 10 seconds ten everything was lickrty split. For the first time ever, I can use the Projects view with all 791 projects and scroll quickly. I even put it in photos modevand whipped thru all 49,000 images!
    Haven't done anybprocessing yet, but i'm liking it!!
    Jim

  • Iphoto 6 and Panasonic DMC-FX37

    Hi Everyone
    I wander if you might be able to help me with an issue I have with a new digital camera and iphoto 6.
    I use iphoto 6.0.6 and I have recently upgraded my digital camera from an Olympus 410uD to a Panasonic DMC-Fx37 and found that the pictures of the Panasonic are only visible in the main Library (size 5394 pictures). If I look in any of the iphoto default folders such as Last 12 months or year folder 2009, the Panasonic pictures do not show up. In fact the only way to get the pictures to become visible is to create a Smart Album for just the Panasonic, using the camera model as a way of selecting the pictures. I first noticed this quirk when I had synced my IPod. The iPod does not Sync the main Library but only the iphoto and user generated ones. By creating a smart album for the Panasonic pictures I have managed to back up the photos to the iPod, but the problem of iphoto recognising the photos in the default folders is still unresolved.
    Can anyone shed any light on this problem or I am stuck with this?
    All answers gratefully received.
    Kind Regards
    Working Man

    Hi TD
    Thank you for your assistance todate and as you seem to have taken as interest in my iPhoto problems, I thought I woudl post you an update. I followed your advice and downloaded iPhoto Library Manager and went ahead and rebuilt the Library. Everything was going to well until the build process was cancelled when rebuilding last one or two rolls - the rolls that contain the FX37 files. The result was iPhoto shut down and produced a log saying that the following files are corrupted (FX37 photo files). The files are still in the main Library and can be pulled together as a smart album under the cammera name and edited at will, but the dates are not recognised and therefore it does not show up when trying to search for these in the main Library. Another quirk is that the last two film rolls are out of sequence with the previous ones, so roll 261, 262, then roll 454 etc.
    I intend to try the following:
    1 check iPhoto with my older camera to see if pictures from this import correctly. (thereby elimnating the iPhoto; and
    2 check the SD card inside my Panasonic FX37 and try it in my Olympus and then reimport a test picture;and
    3 check the panasonic camera with a different SD card with a test picture;and
    4 Back up the FX 37 photos and delete from the main Library and reimport;or
    5 Create a new library and reimport from the back up.
    Any Advice would be gratefully received.
    Workign Man

  • Connecting Panasonic DMC ZS10 for video

    I can't connect my Panasonic DMC - ZS10 camera to I Movie to "import from camera".  All I get is my Mac built in camera as an option in the drop down box.  Any help/advice?

    Can't help with your in camera settings, but the NEW ITEM process will ensure that your editing sequence matches your video file
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 has a link to learn about the NEW ITEM process, including a picture to show you what to do

  • HT3290 RE Lumix Panasonic DMC ZS19  Can anyone tell me if you've found a way to import videos off the camera into iPhoto or iMovie?  -Ellen

    RE Lumix Panasonic DMC ZS19  Can anyone tell me if you've found a way to import videos off the camera into iPhoto or iMovie?  -Ellen

    Won't work shooting in 60P format. But will work fine in the others. I use the built in card reader in my Mac and it shows up fine in iMovie.
    Hugh

  • Panasonic DMC-FZ8 and Leopard - third party plugins for use of RAW?

    Hello!
    I have a Panasonic DMC-FZ8 camera, and frequently find myself in situations that require the use of RAW image format. Unfortunately, even as of the 10.5.4 update, this camera's RAW format is not supported by OS X natively - only through Photoshop Elements 4 in my case. (Leopard's formats as of today: http://support.apple.com/kb/HT1475) While I can read and edit the raw images, it's a hassle to go through photoshop when importing images - Ideally, i'd like to simply import the images into iPhoto ('08) to browse and touch up - instead of opening in PS, editing, saving as JPG (or TIFF), and so on.
    Is there any plugin for OS X that will allow me to view/use my RAW format - at least in iPhoto? Ideally, I'm thinking of something similar to the way the perian plugin works for Quicktime. (See here for Perian: http://perian.org/)
    Thanks

    Hi Daddeo,
    I have not seen any but some of the codes that some of us have been receiving in this forum have worked for me as a plugin. I copy the code and paste it in a snippet and it does what I wanted. Search the forum for the things you want to accomplish. Chances are someone has asked for it and someone has helped. If you really do not find anything ask and someone will help.
    Good luck
    Mireille

  • Camera Profiles/ Camera Raw 5.2 for Panasonic DMC-G1

    I installed the Camera Raw update in Elements 7 and also ran the Camera Profiles executable in C:\program files\adobe|photoshop 7\plug-ins\file formats. When I open the raw image, I see "Camera Raw 5.2 - Panasonic DMC-G1" in the upper left hand corner. Now if I click on the Camera Calibration tab and look at the Camera Profile Name drop-down, I only see Adobe Standard. Does this mean the DMC-G1 is not supported yet or is there something wrong?

    Lest there be any confusion, Jao is talking about ACR profiles that are tailored to the several shooting modes of some cameras. The DMC-G1 is definitely suppported within ACR 5.2, but only with one profile, the Adobe Standard for that camera. I went to the folder containing the standard profiles, and the DMC-G1 was one of them.
    Richard Southworth

  • When will LightRoom support the Panasonic DMC-GH4 camera?

    When will LightRoom support the Panasonic DMC-GH4 camera?

    Adobe rarely comments publically about future support; however, a new camera is usually supported in the next version of Adobe software.  LR comes out every 3 or 4 months and LR 5.4 was released April 7, with a beta a few weeks before then, I’d guess it won’t be too much longer, unless there is some special problem with GH4 support.
    The betas are available on http://labs.adobe.com/ so that is the first place to periodically check.
    With LR 5.4 there wasn’t a public beta (release candidate) due to the newly added Lightroom Mobile feature that Adobe wanted to keep secret until it was actually for sale.

  • Panasonic dmc-tz1

    I love my new digital Panasonic DMC-TZ1. I can insert pictures into a Word document - but can't click and drag the picture from iPhoto 6 into the document. When I do that I get the error message "quicktime and a tiff (uncompressed) decompressor are needed to see this picture." Any suggestions?

    I just ran into a similar problem myself. It used to work, but now it doesn't. I assume that something broke with a recent update of iPhoto or Word. I want to get it fixed for Drag and Drop, but for now I have a solution that is successful, but requires a few extra steps. I selected all the photos I might want to use with Word for now, chose Export, chose File and Original Format and put them all in a Folder. Viewing that folder in the Finder by Icon I could change the View Options to make the icons pretty large, then I just dragged the pictures from the Folder one by one into Word and they worked fine.

Maybe you are looking for