DNG Converter 5.4 will not convert Canon 500d .cs2 raw files

Hello
I downloaded the DNG Converter 5.4 to try and convert the raw files from my new Canon 500d.
I got an error message stating "the file could not be created."
Has anyone with the same camera got the dng 5.4 converter to work with the 500d yet???
I am running osx 10.5.6 (latest version)
I know I should have checked before spending over £1000 pounds on a new setup that the camera will work in lightroom. I am very upset with myself.
If anyone can help let me know.
Thanks,
Matt

I'm running Windows XP - downloaded and installed both DNG Converter and ACR 5.4.  Found a 500d raw file on the Internet and downloaded, opened ok in the DNG converter, produced a .dng file that then opened successfully in ACR.  And the raw file also opened in ACR.
I would first check the installation process, perhaps someone on the forum with both 10.5 and a 500d can testify.  Or if they have just 10.5 do the same as I did and download a test file.
Richard Southworth

Similar Messages

  • Elements 9 w/ RAW converter 6.5 will not convert files from Canon S100.

    Elements 9 with upgraded RAW converter 6.5 will not download (or convert) files from my Canon S100.

    Thank you for the reply.  I have struggled with this problem for about 6 weeks.  Got bum information from both Canon and Adobe.  Grew discouraged.
    As a “test” after reading the discussion, I downloaded the trial version of Elements 10.  It contained RC 6.6, which would not do the S100.  I “updated”
    to 6.7 which finally did the job.  I’m really curious as to why the download of Elements 10 doesn’t “ship” with the latest RC?  I guess just to maintain
    confusion for as long as possible.
    Thanks again.  Only your reply enabled a final solution.
    Graden Harger
    Houston

  • Aperture not recognizing Canon G-10 RAW Files?

    All of a sudden Aperture is not recognizing my G-10 RAW files. It did yesterday, but not today. I just downloaded the new aperture update thinking that might change things, but no go. Just says "unsupported file format"
    Any suggestions?
    Thanks, Shane

    What is your import workflow? Are you (appropriately) uploading images first to the hard drive before importing into Aperture? Was the card (appropriately) reformatted in-camera before shooting the new batch of pix?
    Direct camera-to-Aperture or card-to-Aperture workflows can be problematic, as can using the computer for erasing card images or reformatting cards.
    -Allen Wicks

  • I have lightroom 4 and have recently bought a canon rebel t5. it will not let me open up raw files, no matter what i do. please help. thank you.

    I have lightroom 4 and have recently bought a canon rebel t5. I cannot get lightroom top open the cr2 (raw) files no matter what I do. Please help!!!

    You need to upgrade your version of Lightroom to version 5.4 or newer.
    Camera Raw plug-in | Supported cameras
    Or, download and use the free DNG Converter, which will produce files that Lr 4 can convert.

  • Lightroom 3 and Photoshop CS3 do not recognise Canon PowerShot S90 raw files

    My husband has lightroom 3 and Photoshop CS3 but they don't recognise CanonPowershot S90 camera raw files. I've tried searching for the problem on internet but can't find anything that helps. Adobe's DNG converter doesn't work either. I've tried different versions of the DNG converter to no avail. Buying a new Adobe product is out of the question.
    Another problem is that his e-mail address has been changed so that he can't login to his Adobe account. We used to be able to contact Adobe Netherlands by phone or email but that option isn't available anymore.
    Can anyone help please?

    Go to here:
    Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 3.6
    or here:
    Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 3.6
    for the final versions of LR3. Download and install the software. You do not need to remove your present installation first, LR will install over it and fix any faults that now exist.
    Your husband can log onto his Adobe account with the old email address and when in the account can edit the address to the new one.

  • CS6 Camera Raw 7.4 "will not open" compatible D800 NEF Raw files (Win7)

    CS6 camera raw 7.4 "will not open" the compatible D800 NEF Raw files (Win7). D300 NEF files open OK.
    I seem to remember seeing an article that stated i would have to uninstall and re-install CS6 Photoshop completely and re-install again. However I cannot find this article now.
    If the above is true, having PS version CS4 with update CS5 & 6 installed, would i have to remove all PS versions.
    Photoshop error message just states download latetest software version, which i have done with ACR 7.4. I have also tried ACR 8 which did open file either.
    Also when ACR8 is hosted by Photoshop CS6, it does not offer any of  the new features described in Photoshop CC marketing materials for ACR8 (Re: DPReview mag) so i returned to 7.4
    Adobe DNG runs OK but i would rather deal with the original file in ACR rather than adding an additional step with more files to keep track of.
    Is there a way of uninstalling all versions of ACR, cleaning system and re-installing ACR, assuming the fault lies with ACR?
    Anyone have any answers?
    Malc

    Half an hour after posting this query (in the wrong forum) I resolved the issue. The fault lies with Nikon Transfer.
    Nikon Transfer corrupts the D800 NEF files. Apparently Nikon Transfer is well known for causing errors.
    Drag & dropping the files direct from the memory card onto your hard drive and everything works fine.

  • Camera raw 7.4 will not open the D800 NEF Raw files. D300 NEF files open OK

    Camera raw 7.4  will not open the compatible D800 NEF Raw files (Win7). D300 NEF files open OK.
    I seem to remember seeing an article that stated i would have to uninstall and re-install CS6 Photoshop completely and re-install again. However I cannot find this article now.
    If the above is true, having PS version CS4 with update CS5 & 6 installed, would i have to remove all PS versions.
    Photoshop error message just states download latetest software version, which i have done with ACR 7.4 nd ACR 8 which did not open file either.
    Adobe DNG runs OK but i would rather deal with the original file in ACR rather than adding an additional step with more files to keep track of.
    Is there a way of uninstalling all versions of ACR, cleaning system and re-installing ACR, assuming the fault lies with ACR?
    Anyone have any answers?
    Malc
    ANWER:-
    (Appologies for spelling errors but my keyboar hs just packed up). Now on  screen keyboard.
    Half an hour after posting this query (In the wrong forum -  Downloading, Installing, Setting Up) I resolved the issue. The fault lies with Nikon Transfer.
    Nikon Transfer corrupts the D800 NEF files. Apparently Nikon Transfer is well known for causing errors.
    Drag & dropping the files direct from the cameras memory card onto your hard drive and everything works fine.
    Nikon Transfer has now been assigned to the dust bin!

    Half an hour after posting this query (in the wrong forum) I resolved the issue. The fault lies with Nikon Transfer.
    Nikon Transfer corrupts the D800 NEF files. Apparently Nikon Transfer is well known for causing errors.
    Drag & dropping the files direct from the memory card onto your hard drive and everything works fine.

  • CS6 will not read/open Sony a6000 raw files

    Have just purchased a Sony a6000 and I shoot in raw. When I came to retrieve the files from Bridge in CS6 it will not open them. The software shows up to date and if I try to open directly in CS6 nothing shows up. My Nikon downloads fine in raw. Please offer advice to start downloading my photographs.

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    The Sony a6000 was first supported in Camera Raw 8.4
    If you're running Windows 7 or Windows 8 or Mac OS X 10.7 or later then update Camera Raw via Help.
    Or manually install via
    Camera Raw plug-in installer

  • IPhoto does not support Canon Powershot S45 RAW Format

    Hi,
    It seems iPhoto does not support Canon Powershot S45 RAW file format. Can this be added to be supported!?
    Does anyone know how to report this to Apple and request this as a feature enhancement?

    Or this link: http://www.apple.com/feedback/iphoto.html

  • I have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please..

    i have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please

    Did you buy PSE in the mac app store? If not, just go to Help>Updates in the editor and update camera raw and you should be able to open the raw files in PSE 12 directly without the DNG converter.

  • Lightroom 5.7 will not convert .nef to dng from my Nikon d750. Stand alone dng converter will not recognize or convert the files.

    Lightroom 5.7 will not convert .nef to dng from my Nikon d750. Stand alone dng converter will not recognize or convert the files. Any know whats wrong?

    I don't understand why you feel you need to use ViewNX to download your images from the camera. Lightroom has an excellent import process. I don't see that you gain anything by using the Nikon software. It seems to me that it has the capability of just creating more problems.
    If you want to convert your D750 files to DNG using the standalone DNG converter thing you need to have DNG converter 8.7 installed. Once you have it installed, just choose the FOLDER in the DNG converter, but don't open it in the DNG converter file browser. If you open that folder then you will get the message that there are no files to convert. The converter works on the folder level, not the individual file level.

  • DNG Converter 8.7.1 not converting RAW files.  Windows 7.

    DNG Converter is not recognizing any RAW files hence it will not convert anything to DNG.  Tried the download a few times and different versions but nothing is happening.  I just had the computer repaired and iI have lost the ability to convert CR2 and IIQ files.  Previously, before the computer crashed I was able to do so.  At the recommendation of the service tech, I went from Windows 8 to 7, since I hated 8 and other machines I work on are 7.
    It probably is a simple fix but I have no idea what needs to be done.  Please advise.

    update your lr to lr 5.7.1
    your ps can still be updated, but i can't determine why you're showing an old cr and you've stated you've already updated ps to 13.0.1.3
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Adobe Acrobat 8 will not convert a pdf to a jpeg

    Adobe Acrobat 8 will not convert a pdf to a jpeg. It just gives an error message and shuts down every time I to save it as jpeg. Any advice why this conversion will not work?  I use a PC and run Windows 7.

    The Acrobat 8 product family passed into End of Support years ago.
    Acrobat 8 is not compatible with today's OSs.
    Be well...

  • Adobe starter edition has photo numbers by the picture such as DSCO0283.JPG , where can I find that number on the pictures in PHOTOSHOP ELEMENTS 12--reason being that photoshop elements will not convert my catalog to version 12. If i had that number I cou

    adobe starter edition has photo numbers by the picture such as DSCO0283.JPG , where can I find that number on the pictures in PHOTOSHOP ELEMENTS 12--reason being that photoshop elements will not convert my catalog to version 12. If i had that number I could manually rebuild my collections into the photoshop elements 12, but all that i see in photoshop elements is dates and i have multiple pictures from the same dates. HELP! I

    finally getting back to this project---adobe starter edition 3.2 is on a windows XP computer
    ADOBE PHOTOSHOP ELEMENTS 12 is on our Windows 8.1 computer.
    error messages--- had to give up trying to convert---I copied all our pictures to our windows 7 laptop and I installed adobe photoshop elements 12 (my bought program)
    I wanted to try to convert there first. also I copied our catalog to this computer also. Everything was working fine I could see the collections just as they where on the XP computer.
    then I tried to convert on the laptop. I believe the error said something about corrupt file, so I gave up that day. Next day I tried to open ADOBE STARTER EDITION 3.2  and it wanted an unlock code, no such code exists. and my copy of Elements 12 turned into a trial version which has expired. So I am a little hesitant to try to convert on the XP  computer and mess up the existing catalog,
    unless there is a fool proof way. I have tried manually making collections/ albums on Windows 8.1 and PHOTOSHOP ELEMENTS 12  and coping pictures into the new albums. sloooow!!
    I probably have about 4500 pictures and 150 collections/ albums to go. So any suggestions would be appreciated.

  • I am having trouble getting a numbers spreadsheet to hold different formats in the same column.  A column with a date formatted heading will not convert to $ for the cells below.   Any suggestions would help.

    I am having trouble getting a numbers spreadsheet to hold different formats in the same column.  A column with a date formatted heading will not convert to $ for the cells below.   Any suggestions would help.

    Hi Wayne,
    Thank you for this response.  I have tried this but when I start enterring $ amounts some, such as $6.00, go in OK others such as $4.00 appear as a date ie 4 Oct 12.  
    Kind regards
    Paul

Maybe you are looking for