DNG Converter Doesn't Recognize RAF Files

I work in RAW with a Fujifilm X-E1, and Photoshop CS3. Since I got the camera almost a year ago, I have been successfully able to convert RAF files to DNG files using the Adobe DNG Converter so that I can use the files with CS3 - until I downloaded the latest version of the firmware for the X-E1.   Now DNG does not see the RAF files, so I can't convert them.   When I point DNG Converter to the folder with the RAF files downloaded from the camera, Converter says "No items match your search," but the files are definitely there.   I am using the latest version of DNG Converter (8.2).   What is wrong?  

Actually I found the problem in an earlier post.   If I point DNG Converter to the correct folder, it will convert the files in the folder even though it doesn't show the individual file names on the screen.  Silly programming, but that's how DNG works now, I guess.

Similar Messages

  • Lightroom 3 doesn't recognize RAF files

    For some reason my Lightroom 3.6 no longer recognizes .RAF files from my X100s.
    For some weird reason, raw files from my older X100 are recognizable.
    Everything seems up to date.
    Running on a Macbook Air.
    What gives?

    What Bob and Jim said.
    Camera makes and models supported by various versions of Camera Raw and Lightroom:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    DNG converter
    http://www.adobe.com/products/photoshop/extend.displayTab2.html

  • Adobe DNG Converter can't recognize any files

    Hi All!
    I'm new here and would very  much appreciate help.
    I am running a Mac OS X 10.04.11 and would  like to open .CR2 files (native file from my Canon 500D) in PS4      / Bridge  CS4. My problem is that although I have downloaded the Adobe DNG Converter and Camera Raw 5.1  update as described  here: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4057,  the DNG Converter can't recognise any files at  all (they are greyed-out  when I go to select any folder). I also followed these steps from the aforementioned link (well at  least I hope I did it right, I found the reference to step 4 slightly  confusing):
    To install with Adobe Creative  Suite 4 or Photoshop CS4:
    Automated installation on Mac or Windows®:
    1. Select "Updates..." from the Help menu
    2. Follow the on-screen dialogs to download and  install the latest  available Camera Raw update  
    Manual installation on Mac:
    1. Exit Photoshop CS4 and Adobe Bridge.
    2. Open the Finder.   
    3. Navigate to the root of the local disk (not the user's home  folder).   
    4. Navigate to: (Please read directory carefully)
    Library/Application Support/Adobe/Plug-Ins/CS4/File Formats
    5. Move the existing plug-in to another location (for example, a new  folder on your desktop). Ensure you keep this version in case you need  to revert back.
    6. Copy the Camera Raw plug-in, Camera Raw, from the download  into the same folder as in Step 4.   
    7. Launch Photoshop CS4 or Adobe Bridge.   
    Is that version the right one for CS4?
    Only Finder and the Canon Software can preview my .CR2  files, Photoshop still gives the message: "Could   not complete  your request because Photoshop does not recognise this  type of file." and   Bridge only shows me a generic RAW thumbnail. This message also  appears in PS when I double-click on the  Camera-RAW.plugin. I also  restarted my computer,  but that didn't fix it.
    Can  anyone help me out please? I'd urgently need a solution.
    Thanks in advance!

    I now uninstalled the older 5.1 version and  instead installed the DNG Converter 6.3 separately and it works  perfectly.
    About the Camera Raw 5.6 update: I also downloaded the plug-in  (which I think should be the last version CS4 supports) and can now open  my .CR2 files in PS, Bridge previews them too. :-)
    Is it advisable to keep both, .CR2 as well as .DNG files? Why is it  that my .DNG files are lighter than the native .CR2?
    Thanks again!

  • DNG Converter Doesn't Recognize NEF for D7000

    I have been lon time user of Adobe DNG Converter with Olympus E-500 but I recently got the new Nikon D7000. I have Elements 9 and I am using DNG Converter 6.3.0.79. I download the Elments Verison of the Camera Raw update that came out in December 2010. When I open up my DNG Converter it doesn't recognize any of the NEF files on my camera. I must missing somthing but not sure what it might be. Do I need to add a profile somewhere for it to see the NEF extention? I am bit at a loss.
    Thanks for any help

    What do you mean by reinstall? Do I reinstall PSE 9 and then apply the patch or do I just do the patch again? I have installed the patch a couple of times and nothing is different. There is something wrong with the installation because now my Olympus RAW files do not show up either and they did as of yesterday prior to the installation of the 6.3 update.
    And yes I can load the NEF into Elements but I like the batch convert option for RAW files.
    Thanks everyone for your help.
    Kevin

  • How do I open RAW images from T1-XMG CR2?  Adobe DNG converter will not recognize these files.   HELP?

    How do I open RAW images with T1-XMG CR2? I have adobe DNG converter but it will not recognize these images.  I have had no problem with converting other images.  and ACR will not recognize them either.  Help!@

    The screenshot did come through once I added the period between dropbox and com, making URL:
    https://www.dropbox.com/s/o7q829t2n3uuuqg/screenshot%202014-07-01%2012.36.28.png
    The screenshot shows the first raw file is named T1-XMG_3306.CR2 which probably corresponds to a normal raw filename of IMG_3306.CR2.  It is not clear where this name came from.  I guess it is possible that you’ve entered in a renaming template in LR’s Import panel that replaces the initial I or _ with T1-XM and so the files are renamed. 
    What I have asked for is not a screenshot of your filenames, but one of the CR2 files, itself, which you can upload to dropbox and post a link to.  You should use copy/paste to get the link into a message, rather than typing it in, if at all possible.
    This is because it was my understanding that these oddly-named CR2 files don’t work, and I wanted to look more closely at them to see if they were recognizable as some other type of file.
    Do you have a raw file named IMG_3306.CR2 that these files correspond to?

  • Lightroom 5.7 will not convert .nef to dng from my Nikon d750. Stand alone dng converter will not recognize or convert the files.

    Lightroom 5.7 will not convert .nef to dng from my Nikon d750. Stand alone dng converter will not recognize or convert the files. Any know whats wrong?

    I don't understand why you feel you need to use ViewNX to download your images from the camera. Lightroom has an excellent import process. I don't see that you gain anything by using the Nikon software. It seems to me that it has the capability of just creating more problems.
    If you want to convert your D750 files to DNG using the standalone DNG converter thing you need to have DNG converter 8.7 installed. Once you have it installed, just choose the FOLDER in the DNG converter, but don't open it in the DNG converter file browser. If you open that folder then you will get the message that there are no files to convert. The converter works on the folder level, not the individual file level.

  • Cannot open CS6, it craves JBX-plugin, and my Mac doesn't recognize the file so I can't download

    I wonder why CS6 is not complete when downloaded? Why should I have to download JBX? If needed it should be a part of Indesign. My Mac doesn't have a name of a file to open and download, so now I simply don't have CS6 and can't convert my book to Kindle for sales on Amazon.
    Terribly disappointed!
    /maria

    I am using OS X 10.9.2 and I'm attaching the error message I get. I am
    trying to install InDesign CS6 in order to convert my book to Kindle, but
    Amazon's plug-in only works with InDesign CS6 NOT with InDesign CC.
    I am attaching the Kindle Plugin also.
    2014-05-07 22:19 GMT+02:00 Jeff A Wright <[email protected]>:
        Cannot open CS6, it craves JBX-plugin, and my Mac doesn't recognize
    the file so I can't download  created by Jeff A Wright<https://forums.adobe.com/people/JeffAWright>in *Creative
    Cloud Download & Install* - View the full discussion<https://forums.adobe.com/message/6363126#6363126>

  • I'm trying to e-mail music scores and audios, but I receive an error message saying Preview doesn't recognize the file format, regardless whether I use .mus, .pdf, or .mp3.  I haven't come across Preview or this problem before.  Any suggestions?

    I'm trying to send music, scores and audio, as e-mail attachments, with a copy to my e-mail address.  Whether I use .mus, .pdf, or .mp3, the error message says Preview doesn't recognize the file format.  I haven't seen Preview, or had any problems, before now.  Thanks for any suggestions.

    Hi,
    Firstly, your country is detemined by several factors, including your phone's regional settings, your SIM card and your NokiaAccount settings, if you used this phone whilst abroad then you may need to check that your regional and account settings are up to date since you have arrived in Canada.
    For services like Gigs, you should also ensure that the MixRadio app has access to your phone's GPS location as well as the main location being on in the phone settings. To check this, as well as Location being turned on in the phone settings, in MixRadio itself go to Settings>Location>On:
    The concern with favourites may also be related to location, if the music from certain artists is available in Canada but not where the service might think you are, availability of content may vary from region to region.
    If all settings in both the phone, your Nokia Account and the MixRadio app are correct, we may have to investigate deeper.
    It is impossible to comment on your camera without seeing it, you cold have the phone checked by Nokia Care locally, but of course if it was supplied in Europe it will be covered by the European Limited Warranty which is not valid in Canada.
    If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

  • Adobe won't open Firefox 4, says it doesn't recognize the file type. Help?

    After the first try, I updated Adobe to the latest version, but it still doesn't recognize the file type of Firefox 4.0

    Hello,
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • I can't import MXF files shot on a Canon C300 into FCP 10.1.2.  I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer.

    I can't import MXF files shot on a Canon C300 into FCP 10.1.2.  I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer.  Any help is appreciated.

    Russ and Luis,
    I did uninstall and re-install Canon XF Utility and the Canon FCPX plug in.   Still no luck.  I checked the CanonXF64.RADPlug folder is on my computer in the Rad Plugins folder in application support  This is where it is supposed to be as far as I can figure out. 
    Another piece of the puzzle is that  footage shot on a Canon C300 in 2013 and  I reimported today and it DOES import into FCP10.1.3.   Footage shot on a different Canon C300 filmed this summer will NOT import into FCPX.  The latter will import into Premiere. But I am trying to work in FCPX, but maybe I shouldn’t be??
    Any ideas?  (screen shots below)
    Thanks.
    Peace, Huey
    FYI Here is what Canon says
      "There is another trick that works sometimes though.  Try uninstalling the plugin and XF Utility.  Then, install the latest XF Utility, followed by the plugin, in that order."
    I did do this but no results.  Otherwise they say I need to wait for a new plugin.
    Here's 2014 Canon C300 files does NOT import to FCPX
    Here's 2013 Canon C300 files does import into FCPX.  I thought it was Contents folder but another set of footage shot on C300 does import and there is no contents folder for that. 

  • I can't import Nikon NEF (RAW) files.  It says it doesn't recognize the file.  Help.

    I just installed Nikon Transfer and then View NX2 with Nikon Transfer 2 and successfully transferred over 300 RAW (Nikon NEF) files from my camera (Nikon D600) but Lightroom (v5.6) won't import them.  It says it doesn't recognize the files.  How can I resolve this?

    Obsolete versions of Nikon software corrupt Nikon raw files slightly making them unrecognized in Adobe products.
    You can reverse this corruption by using the utility from the following webpage:
    http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html
    Basically you need to use Nikon software that is at least as new as your newest camera or don’t use Nikon software at all.

  • IPhoto doesn't recognize .jpg files and can't open it. What may I do now?

    iPhoto doesn't recognize .jpg files and can't open it. What may I do?

    a common problem is that you don't have permission to upload those files, but it is an easy fix
    1) Finder
    2) Users(it should have the account name on it)
    3) pictures
    4) right click on iphoto library then click info
    5 on the bottom of the new window there should be a sharing and permissions tab
    6) make sure you have permission to read & write
    The only other problem I can think is that you are having problems with hard drive space. if so you might want to clean up your hard drive to free up some space. please let me know if that worked for you.

  • I installed Lion, now my dvd drive doesn't recognize any files on dvd. Please help.

    I'm a photographer with tons on images on dvd and my dvd drive now doesn't recognize any files on any of my dvd's. Help!!!

    After 3 trips to the Apple store this week, the issue is still unresolved. The photo dvd's open just fine on Snow Leopard, but are not recognized at all on Lion. I'm guessing since the DVD's were originally burned on a PC, they will no longer work. After finding out that PowerPC is no longer recognized by Lion and I can no longer use Nikon NX2 (Photo editing software), I will be re-installing Snow Leopard. According to the Apple store in Lancaster, Pa. there is no refund available for my Lion purchase. I have a ton of photo DVD's, most of which will not open since I've only recently switched to an IMAC system. It has made me think about returning to the PC world. I'm VERY unhappy with these developments and I really need to re-think my computer situation. I don't do much else besides photography. My purchases and time spent with my IMAC has aparently been a great waste.

  • How do I keep my installer from trying to update with Photoshop instead of installer? Quark can't update because the installer opens Photoshop which doesn't recognize the file and I'm not given the option to choose anything else.

    How do I keep my installer from trying to update with Photoshop instead of installer? Quark can't update because the installer opens Photoshop which doesn't recognize the file and I'm not given the option to choose anything else.

    1. Sync wasn't intended to be used in that manner. You would be better off carrying around a USB Flash Stick with Portable Firefox for use on "strange" PC's.
    2. You could open the "Library" {Ctrl + Shift + B} and highlight all those bookmarks and then delete them all at once. But that would also delete all the other bookmarks, and it isn't foolproof. All another person would need to do it to '''''restore''''' a bookmark backup file that has your bookmarks. Beyond that, a new Profile could be created and then the current Profile deleted; but that's "messing with" someone else's computer - an action that is worthy of terminating a friendship over, IMO.
    And if that "public" computer was set up properly, Sync should have been disabled.

  • PSE 10 doesn't recognize raw file

    Have been using PSE 10 on a four year old Macbook pro with no problems.  Opens RAW file with no problem.  Just installed the same PSE 10 on a new iMac, and PSE 10 editor says it can't open file because it doesn't recognize the file.  Any suggestions?

    The canon 5d mkIII requires the 6.7 camera raw plugin and pse 10 does support the camera 6.7 plugin.
    When you went to Help>Updates from within the pse 10 editor, was there an updated version of camera raw listed for installing?

Maybe you are looking for