DNG converter works automatically for NEF but not NRW

I have this issue with the DNG converter and Adobe Camera Raw 6.3. I run Windows 7 64 bit, and use the DNG in my worklflow with a program called Image Ingester Pro, where the card is downloaded with three copies (original and two backups) on separate internal hard drives, put in folders and renumbered, and the DNG converter is applied to the original and back up #1, leaving me only dng files in those hard drives. The original raw format is saved to the back up #2.
This works incredibly well with NEF files from my D2x. No issues. Using the latest download of the converter.
I have a Nikon P7000 that shoots a raw file that is a NRW file, which Camera Raw 6.3 and LR 3.3 now supports with this latest converter. I run the same program, and the DNG converter fails to run. It leaves me with NRW files in all three hard drives. I can then locate the folder, open the converter as a standalone program, and run the converter, and it converts the files. I then have to search for the NRW files and delete them, leaving me the DNG files in these 2 folders.
The same issue happens on my laptop runing Windows Vista 64 bit.
I have tried every work around including deleting the download and doing a fresh download of the converter. Somewhere the program stops when it sees the NRW file. Has an additional prompt or step been added? Is it a new administrative permission, that does not occur with the NEF files? This is really perplexing. Nikon is continuing to use this file format with the D7000 and possibly other cameras. Do we have to wait until ACR 6.4 is released for a fix?

I installed DNG Converter 6.3 this afternoon to use with NRW files from my P7000.  It does not even recognize that NRW files exist, however runs fine with NEF files already on the computer.  My laptop runs Vista 64.
Also loaded Converter 6.3 on my desktop, running Vista 32.  Doesn't work with NRW files there either.

Similar Messages

  • Fixed header working fine for desktop but not for windows phone

    I have my website in asp.net with master page. I have used below css for header div of my website to make it fixed.
    .header{
    z-index: 3001;
    position:fixed;
    top:0px;left:0px;
    background-color: white;
    width:100%;height:150px;
    This is working fine for desktop. But on mobile, I can only see my 50% of width of the header. On the right side of 50%, nothing is cmg. As in just white background is cmg. On the right side, I have a button which when I click is working. To say, controls are
    not visible but they are working if u manage to click at the exact place. Any fix for this?
    I want to add that this problem is coming only in windows phone. So need fix for that.

    Hi User1508372,
    The
    Developing for Windows Phone forum is for developers to discuss writing Windows Phone apps, not for writing web sites targeting Windows Phone IE.
    My guess here is that your site may be running into a compatibility mode or different versions of IE on desktop and on Windows Phone, but you don't provide enough information about which versions of IE you are using. Windows Phone 8 uses IE 10 (similar to
    Windows 8).
    The folks in the
    Windows Phone IT Pro forums are likely to know more about the Windows Phone IE specifics, and the folks in the IE or ASP.Net forums will know more about how to target your HTML for different versions.
    --Rob

  • HT204291 Apple TV mirroring works fine for iPad but not for MacAir (with MtnLion).  The MacAir can stream music and photos to the Apple TV but no mirroring??

    IT will stream photos and music and photostream (screensaver), but no mirroring, not even the icon??

    Is the MackBook Air mid 2011 or newer? Only mid 2011 or newer Macs support AirPlay Mirroring. Read here for system requirements > http://support.apple.com/kb/HT5404
    Hope that helps.

  • Trouble playing .swf - works offline in browser but not online on website

    Hi there,
    I'm having trouble displaying a flash .swf file properly on my website: http://dreamriderproductions.com/fun/game-test/
    When I view the .swf file locally on Chrome, I get a text box to enter my name and I can click Go and keep playing the game. For some reason, when it's up on the website, there's no text box so I can't progress. Can you?
    Background: The game did used to connect to a database, but the upgrade of our website (and relocation of the swf) seems to have broken the database connection. People couldn't progress past the first screen presumable because the information on which city they were in couldn't be submitted to the database. We've got a version of the game with the database connection disabled and so the game should now work - it works locally for me but not on the website!
    Any ideas?
    Thanks
    Sion

    The code you have posted is not the same code as used in:
    <div id="gallery">
    in the link above.
    The reason that the Flash is not displaying in FF is that the portion of the code used by FF was omitted. The code currently used on the page only works in IE.
    I'm no great fan of the IE conditional statements used in the code you posted so I don't blame you for not using it. But you do need to provide something for FF.... the old, out dated method would be to add and <embed> for FF... here's the newer method..
    So either use code you posted above or better yet, get rid of that and replace the current <object> with
    <div id="gallery">
    <object id="FlashID" data="flash/201.swf" type="application/x-shockwave-flash" width="958" height="242">
       <param name="movie" value="flash/201.swf">
       <param name="quality" value="high" />
         <param name="wmode" value="opaque" />
         <param name="swfversion" value="6.0.65.0"/>
    </object>
    </div>
    Give that a try. Will work in both FF and newer IE versions.
    Best wishes,
    Adninjastrator

  • DNG Converter Doesn't Recognize NEF for D7000

    I have been lon time user of Adobe DNG Converter with Olympus E-500 but I recently got the new Nikon D7000. I have Elements 9 and I am using DNG Converter 6.3.0.79. I download the Elments Verison of the Camera Raw update that came out in December 2010. When I open up my DNG Converter it doesn't recognize any of the NEF files on my camera. I must missing somthing but not sure what it might be. Do I need to add a profile somewhere for it to see the NEF extention? I am bit at a loss.
    Thanks for any help

    What do you mean by reinstall? Do I reinstall PSE 9 and then apply the patch or do I just do the patch again? I have installed the patch a couple of times and nothing is different. There is something wrong with the installation because now my Olympus RAW files do not show up either and they did as of yesterday prior to the installation of the 6.3 update.
    And yes I can load the NEF into Elements but I like the batch convert option for RAW files.
    Thanks everyone for your help.
    Kevin

  • My sound works for music but not apps

    My sound works for music but not apps

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
     Cheers, Tom

  • I'm having an intermittent problem with my midi controllers triggering Mainstage 3. I'm using a PreSonus Firebox audio interface. It's been working fine for months, but now when I first turn on the computer in the morning , I'm not able to trigger Ma

    I’m having an intermittent problem with my midi controllers triggering Mainstage 3.
    I’m using a PreSonus Firebox audio interface.
    It’s been working fine for months, but now when I first turn on the computer in the morning , I’m not able to trigger MainStage from the keyboard.  I tried different midi controllers, different keyboards, different midi cords, and check midi preferences.  The audio interface is working fine and is recogonized, but the midi doesn’twork.  I re-started the computer several times and then finally it miraculously starts working again.
      I’ve been having to this every day now.  Any help or ideas is very much appreciated.

    I Had the same problem with a FireStudio. Try unplugging the FireWire plug and the power plug. Wait for a few seconds, then plug both back in. The light on my FireStudio was flashing blue/red which means "not connecting." I did what I just described, and everything works again. Hope it works for you.

  • Album Art works for most, but not all

    I was reading previous forums on the subject, but no clear answer was given..
    The album art shows up fine in itunes and my library and works for most of my music on my ipod, but how come some album's art does appear? I have it set manually and select 'Get Info' then 'Artwork' and add it from there, then drag in the finished product to my ipod. I've been doing that and it works fine for most of the albums, but every so often, the album art will not appear on my ipod. Am I doing something wrong? I take them all from the same source (amazon.com) but it makes no sense to me how some randomly don't appear.
    I tried deleting the artwork and re-adding it, but nothing happened again. If you could answer why it works for most but not all or how I can get the album art to appear for the ones it will not by re-doing something, it would be appreciated. thanks.

    I encountered the same problem in the beginning. When I compared the size of the original images, the working ones seemed to be smaller in general, so I reduced the size of all covers I intended to upload on the pod to 300x300 pixels.
    This seemed to work - for 2 days. I bought the pod on friday, had pictures on sunday, but on Monday (after the first time the pod was fully discharged) none were left left.
    So I ended searching this forum for related problems...
    And decided to join my problem to this entry.

  • I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

    I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

    it is a windows 8

  • When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.

    When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.

    Did you select View->Bcc Address Field from the menu bar?

  • Table of Contents page numbers works for PDF but not for other formats

    Hi,
    I followed exactly was indicated here regarding creation of TOC.
    http://docs.oracle.com/cd/E10415_01/doc/bi.1013/e12187/T421739T481157.htm
    The page numbers generated correctly for PDF but not for RTF, HTML and XLS.
    (HTML and XLS are understandably not paginated in nature but why not in RTF?)
    Tried to make the simplest example work, with 2 headings each on a separate page. Doesn't work on either MSWord 2003 or 2007.
    What am I doing wrong?
    Regards,
    Jarell
    Edited by: Jarell on Jan 11, 2012 8:08 PM

    Hi Kavipriya,
    What is your email address? I have attached a file in Oracle Metalink, under SR 3-5172030861. named test_toc.rtf
    You may use any xml because the template does not use any dynamic binding of values.
    The template is basically 2 pages, the TOC in the 1st page. First TOC item (Heading 1) is in Page 1, and Second TOC item is in Page 2.
    So the end result should be (PDF result from BI Publisher):
    First TOC Item .................. 1
    Second TOC Item ............. 2
    But for RTF it outputs:
    First TOC Item .................. 0
    Second TOC Item ............. 0
    And after doing Print Preview (once or twice)
    First TOC Item .................. Error in Bookmark
    Second TOC Item ............. Error in Bookmark
    Hope this is detailed enough to illustrate the problem.
    Edited by: Jarell on Jan 17, 2012 10:24 PM

  • Font face="army" works in my editing program for IE but not firefox

    font face="army" works fine in IE but not firefox when using my website editing program
    == This happened ==
    Every time Firefox opened
    == everytime

    If you check Firefox's Web Console (Ctrl+Shift+K) it'll tell you any errors it's finding and the line of code it's finding it on.
    The problem it seems to be having up front is that IDs are case-sensitive - "layer02" is not the same as "Layer02", for example.
    There may be further errors once it's past that, but all the current browsers come with the tools you need to weed out any further issues.
    Further Javascript reference: https://developer.mozilla.org/en-US/docs/JavaScript

  • Can firefox support "file:///" format to access local files (note 3 fw slashes) this works for IE but not firefox and is the format used in the "afghan war diary" from wikileaks

    can firefox support "file:///" format to access local files (note 3 fw slashes) this works for IE but not firefox and is the format used in the "afghan war diary" from wikileaks

    See http://kb.mozillazine.org/Links_to_local_pages_do_not_work

  • Html link to pdf works ok on mac but not on ipad. adobe reader for ipad downloaded.

    HTML link to pdf works ok on Mac but not on ipad. Adobe Reader for ipad downloaded. What's wrong?

    Hi pwillener,
    Thank for reply. The pdf’s are in a subfolder “PDF” of the folder holding the web page. The web page itself uses
    . This works in full size computer browsers but not in an iPad.
    My excursion through the search engine has produced the idea of adding #page = requesting page to the URL but I have not had time to try it perhaps without the = sign.
    Bryan

  • HT3387 When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

    When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

    http://m10lmac.blogspot.com/2011/06/extra-spell-checking-dictionaries-for.html

Maybe you are looking for