DNG files created from Fujifilm FinePix E-900 .RAF raw files

I'm having a problem in creating DNG files from my Fujifilm FinePix E-900 camera .RAF raw files on my Mac (Mac OS X 10.6.4).  The DNG files are recognized correctly in Adobe software (Photoshop CS4, Bridge, Lightroom 3) but not by any Apple software (including Aperture 3.0).
I've used Adobe DNG Converter 6.1, Photoshop CS4, and Lightroom 3 to create these non-linear DNG files.  As a point of reference, I've used the same settings to create DNG files from Kodak .KDC raws files that Apple also doesn't support, but these DNG files (created from the .KDC raw files) show up just fine in Aperture 3.0.
The one thing I find unusual about the .DNG files created from the Fujifilm FineFix E-900 .RAF raw files is that when I do a 'Get Info' on these files, the image dimensions of these .DNG files always shows up as 0 x 0.  (The image dimensions should be listed as 3488 x 2616.)
So I'm wondering if there is something wrong (a bug maybe) on how these files are being converted to the DNG file format using Adobe DNG Converter 6.1, Photoshop CS4 or Lightroom 3 on a Mac.
Peter

Hi Frank, you need camera Raw 7.4 which is only available for PSE11. Consider upgrading or wait for PSE12 to be launched soon. If you regularly shoot raw try Lightroom with PSE10 as your external editor.
Alternatively, download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in PSE10 (keep your originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.1
Mac download (.dmg file) click here DNG Converter 8.1
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

Similar Messages

  • Unable to see the logical path and file created in FILE tcode from AL11 and unable to upload the file to this path from front end

    Hi Experts,
    I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
    I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
    custom path and file created from FILE tcode.
    Thanks & Regards,
    Anusha.

    Hi Anusha,
    Please give as below.
    I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
    Regards,
    Pavan

  • Importing OMF files created from Final Cut 4.5

    Hi Guys,
    I'm trying to import an OMF file created from Final Cut 4.5 and I'm getting a message saying "skipping audio part- edit point 190316987 too big." After I hit OK, I get thrown out of Logic 7. Has anyone had a similiar message, and if they did what did you do?
    Powermac G5 dual 2 ghz   Mac OS X (10.4.5)  

    Raffi:
    This is Apple document related:
    http://docs.info.apple.com/article.html?artnum=301871

  • I am unable to open PDF files created from another PGM.

    Is there an ADOBE pgm that will properly read in PDF files created from another pgm and convert them to ADOBE PDF so they do not error when they are opened to be viewed by ADOBE pgm?

    There is no way to know all the different scan/fax/pdf printers that are used to make the original PDFs...
    CAD-KAS PDF Editor 2.6 is used to edit the files
    doPDF 5 is used to modify pdf file.
    Interesting, I can use the free CAD-KAS PDF reader to open & read the PDF file that the ADOBE XI reader
    gives me the above error message.

  • If I install dng converter version 8.3 so I can read raw files from my new sony a7 camera, will I still be able to read raw files from my canon 5d ?

    if I install dng converter version 8.3 so I can read raw files from my new sony a7 camera, will I still be able to read raw files from my canon 5d ?

    Ok. That explains 8.3. I know some want to stay with 10.6 because they have software or hardware that won't work on anything later.
    Gene

  • File created from ZipOutputStream not opening as Windows Compressed Folder

    I create a file using java.util.ZipOutputStream using JDK 5. I can open the file in WinZip. But when I try to open as "Compress (zipped) Folders" in Windows XP, I just get an empty folder. Is there something I have to do other than creating a ZipEntry for each file? From WinZip, I can look at the files and extract them and everything seems to be fine including the folder structure.
    Thanks.

    Make sure there are no invalid characters in folders or files stored in the zip file.
    Windows does not allow the following characters in folder and file names.
    \ / : * ? " < >
    Check your zip folder structure to see if it contains any of these characters.

  • Good afternoon ladies and gentlemen!   My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In t

    Good afternoon ladies and gentlemen!
    My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In the settings Adobe Bridge - in "open RAW-files by double-clicking in Adobe Camera Raw» box is checked. When you try any changes in the settings Adobe Bridge system displays a message:
    Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature.
    The entire line of Adobe products on my computer updated to the latest updates. Previously, a family of products Adobe Photoshop on your computer is not set. Computer - PC, Windows 7 Enterprises.

    <moved from Adobe Creative Cloud to Bridge General Discussion>

  • How to change the file type from IMOVIE PROJECT to other types of file

    how to change the file type from IMOVIE PROJECT to other types of file??
    thank you very much for your help=]

    I am not sure what you mean, but once you make a project. Then go to the share menu and you can export the project to iDVD, itunes, mobileme, quicktime.
    Share export quicktime movie will allow you to export to a variety of codecs. What specific export are you looking to share the movie in? What is the final source that the movie will be displayed?

  • Viewing .RAF RAW files in Bridge CS5 on a Mac OS 10.6.8

    I have just purchased a Fuji X30 Camera and cannot view the .RAF RAW files in Bridge CS5... I have a Mac OS 10.6.8
    What do I need to do?  Thanks, Webb

    webbc14686789 wrote:
    …They all have a slightly soft look, which I know is not the circumstance of the f/stops/shutter speeds. Does it happen in the conversion process?  -Webb
    ABSOLUTELY NOT !.
    Blame the photographer nor the camera or the software.—unless it's a cr@ppy camera or lens.
    The DNG Converter does not touch your raw pixels at all.  It just takes them from the RAF wrapper and puts them in a new DNG wrapper.

  • Fuji RAF (raw) files

    How do I use Fuji RAF (raw) files? What file do I need to download for my Photoshop CS5?
    Message was edited by: backlash2

    This is for the benefit of others who might find this thread.
    There is a list of the latest Camera Raw versions that can be used with a particular major release of Photoshop or Photoshop Elements here, in the Camera Raw FAQ:
    http://forums.adobe.com/thread/311515?tstart=0
    The Camera Raw versions listed in the FAQ (e.g., Camera Raw 6.2 for Elements 8) are the latest that can be installed in a particular editor version. 
    If that Camera Raw version is lower than the one listed at the link Trevor supplied above, then you'll need to either use the free DNG converter to convert your files to the DNG format before opening them in your image editor, or upgrade your image editor.
    -Noel

  • Can I process RAW files in PSE7 ?  How do I process RAW files in PSE7 ?

    Can I process RAW files in PSE7 ?  How do I process RAW files in PSE7 ?

    I go to program files\common files\adobe\   There is no plug-ins folder.  I see an adobe PCD folder.
    So far I am unable to follow your instructions!
    dj_paige <[email protected]> wrote:
    No, that's not the solution.
    PSE needs Adobe Camera Raw to work with RAW files. You probably have to download and install http://www.adobe.com/support/downloads/detail.jsp?ftpID=4626 than the one installed with PSE7. Please follow the installation instructions exactly.
    >

  • PDF file created from Oracle Report is attached wrongly

    Hi,
    Please help. It is very urgent.
    I am using Oracle Developer 10gR2, Oracle Report 10.1.2 on Windows 2000.
    I would like to attach the PDF file created by Oracle Report to the Notification sent from Workflow.
    I use the following package procedure in my Workflow.
    procedure Create_File_Attachment (document_id   in varchar2, display_type  in varchar2, document      in out blob, document_type in out varchar2)
    is
         l_itemtype          varchar2(100);
         l_itemkey           varchar2(100);
         l_output_directory  varchar2(30);
         l_filename          varchar2(255);
         src_loc             bfile;
         bdoc                blob;
         src_offset          number := 1;
         dst_offset          number := 1;
         amount              number;
    begin
         l_itemtype := substr(document_id, 1, instr(document_id, ':') - 1);
         l_itemkey := substr(document_id, instr(document_id, ':') + 1, length(document_id) - 2);
         l_output_directory := 'USR_TMP_DIR';
         l_filename := Wf_Engine.GetItemAttrText(l_itemtype, l_itemkey, 'ATR_FILENAME');
         src_loc := bfilename(l_output_directory,l_filename);
         dbms_lob.createTemporary(bdoc, FALSE, dbms_lob.call);
         dbms_lob.fileopen(src_loc, dbms_lob.file_readonly);
         dbms_lob.loadblobfromfile(bdoc,src_loc,dbms_lob.lobmaxsize,src_offset,dst_offset);
         dbms_lob.fileclose(src_loc);
         amount := dbms_lob.getLength(bdoc);
         dbms_lob.copy(document,bdoc,amount,1,1);
         document_type := 'application/pdf; name=attach.pdf';
    end Create_File_Attachment;Oracle Report created the PDF file correctly (original.pdf).
    I tried to attach the PDF into my Workflow.
    I can see the file is attached (attach.pdf), but it cannot be opened.
    The Adobe shows : 'A drawing error occured.' each time I open the attachment.
    I compare the original.pdf and the attach.pdf
    However, there is one specific difference
    - in original.pdf, the line started with '.' (single period)
    in attach.pdf, the line is started with '..' (two periods)
    Thus the attachment cannot be opened.
    After I delete the period, it can be opened.
    Question:
    - Has someone ever succeed in attaching the PDF created from Report?
    - Are the codes above is wrong?
    - Or perhaps the DBMS_LOB.LOADBLOBFROMFILE always double the single period on front of the line?
    - Is there any solution on this?
    Note:
    I have succeed in attaching PDF files unless the PDF created by the Report.
    Sorry for the long post.
    Please help. It is very urgent.
    Any help is appreciated.
    Many thanks,
    Buntoro

    The code looks absolutely good. I have the same code working in my system. Only difference is I use TRUE and DBMS_LOB.Session for the BLOB I use to read from the BFILE.
    I can suggest one more way to handle to binary attachments if you are on Oracle 9i DB are later versions.
    procedure attach_document (p_document_id   in varchar2,
                               p_display_type  in varchar2,
                               p_document      in out nocopy clob,
                               p_document_type in out nocopy varchar2)
    is
      l_nid        number;
      l_directory  varchar2(100);
      l_filename   varchar2(100);
      l_content_type varchar2(100);
      l_src_offset binary_integer := 1;
      l_dst_offset binary_integer := 1;
      l_err_msg    varchar2(100);
      l_amount     number;
      l_bfile BFILE;
      l_blob  BLOB;
      l_clob  CLOB;
      file_not_found exception;
      pragma EXCEPTION_INIT(file_not_found, -22288);
    begin
      l_nid := to_number(p_document_id);
      l_directory := trim(wf_notification.GetAttrText(l_nid, 'ATTR_DIRECTORY'));
      l_filename := trim(wf_notification.GetAttrText(l_nid, 'ATTR_FILENAME'));
      l_content_type := trim(wf_notification.GetAttrText(l_nid, 'ATTR_CONTENT_TYPE'));
      l_bfile := BFILENAME(l_directory, l_filename);
      dbms_lob.createtemporary(l_blob, true, dbms_lob.Session);
      dbms_lob.createtemporary(l_clob, true, dbms_lob.Session);
      begin
        dbms_lob.FileOpen(l_bfile, dbms_lob.File_Readonly);
      exception
        when file_not_found then
          l_err_msg := to_char(sqlcode)||' - Attachment File "'||l_filename||'" is not found.';
          raise_application_error(-20002, l_err_msg);
      end;
      dbms_lob.LoadBLOBFromFile(l_blob, l_bfile, dbms_lob.LobMaxSize, l_src_offset, l_dst_offset);
      dbms_lob.FileClose(l_bfile);
      -- Encode the BLOB content to BASE64 and attach to notification  
      wf_mail_util.EncodeBLOB(l_blob, l_clob);
      l_amount := dbms_lob.GetLength(l_clob);
      dbms_lob.Copy(p_document, l_clob, l_amount, 1, 1);
      -- Mention an appropriate Content Type so that Notification System
      -- understands the attachment content
      p_document_type := l_content_type||'; encoding=base64; name='||l_filename;
    end attach_document;Here I read the BLOB from the filesystem and base64 encode it before giving it to the Mailer. Please note that this is a PLSQLCLOB based attachment as against PLSQLBLOB that you are using.
    Thanks - Vijay

  • PDF file created from Oracle Report is created wrongly using dbms_lob

    Hi,
    Please help. It is very urgent.
    I am using Oracle Developer 10gR2, Oracle Report 10.1.2 on Windows 2000.
    I would like to attach the PDF file created by Oracle Report to the Notification sent from Workflow.
    I use the following package procedure in my Workflow.
    procedure Create_File_Attachment (document_id   in varchar2, display_type  in varchar2,
                                                                                         document      in out blob, document_type in out varchar2)
    is
         l_itemtype          varchar2(100);
         l_itemkey           varchar2(100);
         l_output_directory  varchar2(30);
         l_filename          varchar2(255);
         src_loc             bfile;
         bdoc                blob;
         src_offset          number := 1;
         dst_offset          number := 1;
         amount              number;
    begin
         l_itemtype := substr(document_id, 1, instr(document_id, ':') - 1);
         l_itemkey := substr(document_id, instr(document_id, ':') + 1, length(document_id) - 2);
         l_output_directory := 'USR_TMP_DIR';
         l_filename := Wf_Engine.GetItemAttrText(l_itemtype, l_itemkey, 'ATR_FILENAME');
         src_loc := bfilename(l_output_directory,l_filename);
         dbms_lob.createTemporary(bdoc, FALSE, dbms_lob.call);
         dbms_lob.fileopen(src_loc, dbms_lob.file_readonly);
         dbms_lob.loadblobfromfile(bdoc,src_loc,dbms_lob.lobmaxsize,src_offset,dst_offset);
         dbms_lob.fileclose(src_loc);
         amount := dbms_lob.getLength(bdoc);
         dbms_lob.copy(document,bdoc,amount,1,1);
         document_type := 'application/pdf; name=attach.pdf';
    end Create_File_Attachment;Oracle Report created the PDF file correctly (original.pdf).
    I tried to attach the PDF into my Workflow.
    I can see the file is attached (attach.pdf), but it cannot be opened.
    The Adobe shows : 'A drawing error occured.' each time I open the attachment.
    I compare the original.pdf and the attach.pdf
    However, there is one specific difference
    - in original.pdf, the line started with '.' (single period)
    in attach.pdf, the line is started with '..' (two periods)
    Thus the attachment cannot be opened.
    After I delete the period, it can be opened.
    Question:
    - Has someone ever succeed in attaching the PDF created from Report?
    - Are the codes above is wrong?
    - Or perhaps the DBMS_LOB.LOADBLOBFROMFILE always double the single period on front of the line?
    - Is there any solution on this?
    Note:
    I have succeed in attaching PDF files unless the PDF created by the Report.
    Sorry for the long post.
    Please help. It is very urgent.
    Any help is appreciated.
    Many thanks,
    Buntoro

    Hi,
    Please help. It is very urgent.
    I am using Oracle Developer 10gR2, Oracle Report 10.1.2 on Windows 2000.
    I would like to attach the PDF file created by Oracle Report to the Notification sent from Workflow.
    I use the following package procedure in my Workflow.
    procedure Create_File_Attachment (document_id   in varchar2, display_type  in varchar2,
                                                                                         document      in out blob, document_type in out varchar2)
    is
         l_itemtype          varchar2(100);
         l_itemkey           varchar2(100);
         l_output_directory  varchar2(30);
         l_filename          varchar2(255);
         src_loc             bfile;
         bdoc                blob;
         src_offset          number := 1;
         dst_offset          number := 1;
         amount              number;
    begin
         l_itemtype := substr(document_id, 1, instr(document_id, ':') - 1);
         l_itemkey := substr(document_id, instr(document_id, ':') + 1, length(document_id) - 2);
         l_output_directory := 'USR_TMP_DIR';
         l_filename := Wf_Engine.GetItemAttrText(l_itemtype, l_itemkey, 'ATR_FILENAME');
         src_loc := bfilename(l_output_directory,l_filename);
         dbms_lob.createTemporary(bdoc, FALSE, dbms_lob.call);
         dbms_lob.fileopen(src_loc, dbms_lob.file_readonly);
         dbms_lob.loadblobfromfile(bdoc,src_loc,dbms_lob.lobmaxsize,src_offset,dst_offset);
         dbms_lob.fileclose(src_loc);
         amount := dbms_lob.getLength(bdoc);
         dbms_lob.copy(document,bdoc,amount,1,1);
         document_type := 'application/pdf; name=attach.pdf';
    end Create_File_Attachment;Oracle Report created the PDF file correctly (original.pdf).
    I tried to attach the PDF into my Workflow.
    I can see the file is attached (attach.pdf), but it cannot be opened.
    The Adobe shows : 'A drawing error occured.' each time I open the attachment.
    I compare the original.pdf and the attach.pdf
    However, there is one specific difference
    - in original.pdf, the line started with '.' (single period)
    in attach.pdf, the line is started with '..' (two periods)
    Thus the attachment cannot be opened.
    After I delete the period, it can be opened.
    Question:
    - Has someone ever succeed in attaching the PDF created from Report?
    - Are the codes above is wrong?
    - Or perhaps the DBMS_LOB.LOADBLOBFROMFILE always double the single period on front of the line?
    - Is there any solution on this?
    Note:
    I have succeed in attaching PDF files unless the PDF created by the Report.
    Sorry for the long post.
    Please help. It is very urgent.
    Any help is appreciated.
    Many thanks,
    Buntoro

  • Use FTP Transport Protocol (XI) to send text file created from R3

    I've configured a Port in IDoc Processing (WE21) to create an output file from a Bank Partner Profile (WE20) where my Message Type is PAYEXT and IDoc Type PEXR2002.
    I need to take this Text File and send it to the Bank;s FTP site using the Integration Server (XI).
    How can I take this text file and simply send it to the Bank without going through File Content Conversion in order to convert it to XML as the Sender and then uncovert it during the Receiver to FTP the file to the Bank?
    If that is not possible, would anyone know how to configure the RecordSet Structure and parameters for both the Sender and Receiver?

    Hi,
    Let me re-phrase your scenario:
    ECC is required to send PAYEXT IDOC to XI which needs to be send to the bank in IDOC text file format to the bank. If this is the case we can achieve this by doing the following:
    1.Rather than using TRFC port used by the IDOC as the method of communication, you can leverage using file port. The configurations to the file port are simple. You need to select a place where you can drop the IDOC file created by the ECC system and XI would pick up the file.
    2. Poll for the file using NFS from that particular location where ECC drops the file. (If it is being staged on the ECC system, then XI service user SAPservice<SID> must have access permission on that folder like \usr\sap\put\interfaces.
    3. Configure receiver FTP adapter to send the file to the bank.
    Hope this helps.
    Indranil
    Award points if helpful

  • AC3 Dolby files created from FCE to Compressor don't play in DVDSP

    I've never had trouble with AC3 audio files playing in DVDSP until I started exporting from FCE through Compressor directly. AIFF files exported this way play fine, but are sometimes so large that the video+audio is too much for a DVD. This is why I like AC3 files, they are Dolby stereo, and they are way smaller, allowing me to use higher bit rates in Compressor for the video.
    Now, when I export using Compressor and specify audio as Dolby 2.0 (AC3) the audio will not play in DVDSP. However, if I create an AIFF file at the same time it plays fine, and I can run the AIFF files back through compressor selecting AC3 output and those files work fine in DVDSP.
    What gives? I'd like to be able to encode my audio as AC3 at the same time as I make my MPEG-2 file of the video, and then go directly to DVDSP. Any idea why this is happening, only when exporting from FCE directly through Compressor?
    Thanks!

    --UPDATE--
    I found a series of bizarre workarounds that let me get AC3's from Compressor to work in DVDSP under my aforementioned configuration.
    First, rather than using the "Export Using Compressor" option in Final Cut Pro, I used the "Export Audio As AIFF(s)" Option, creating a stand-alone AIFF of my timeline audio.
    Next, I opened Compressor from the applications folder (again, not through FCP), and dragged the AIFF into the batch window. On the popup menu in the batch window, I selected "Audio Formats--> Dolby 2.0". I chose my destination and encoded. I did not change any settings in the Dolby 2.0 preset.
    In DVDSP, if I clicked import in the assets window and selected the newly encoded AC3, it would show up in the assets bin, but the file STILL would not work. I removed the file from the assets bin.
    Just for the heck of it, I opened a new finder window from the dock, found the file, and dragged it directly into the DVDSP assets bin. The file works!!! I couldn't believe it. Double clicking the AC3 in the finder with DVDSP open also places the AC3 into the assets bin, where it also functions properly.
    I tried this procedure several times in a row and with several encoded AC3's to make sure it wasn't a fluke, and it wasn't.
    So, again, clicking import for AC3's in DVDSP = BAD. Dragging AC3's right in the assets bin from the finder, or double clicking AC3's in the finder = GOOD.
    The procedure mentioned above also *does not* work with AC3's made through one of the "DVD Presets" from Compressor. You have to take an **AIFF** into Compressor directly and send it out as an AC3 for it to work.

Maybe you are looking for