DNG files exported from LR4 not showing changes made when opened in PSE10?

I have LR4, and once I make some develop changes I've been exporting the files I want to use as DNG.  I then open them in PSE10 to make final edits.  It's been working fine, actually I had an older version of Adobe Raw in my PSE on my other computer.  So when I opened in PSE it would ask if I wanted to conver to compatible version to edit in camera raw.  I always said no b/c I didn't need to do anymore raw edits.  Now that I have installed PSE on my new computer, it has the new ACR version I guess.  When I open the DNGs to edit now I no longer get this error message, but it's showing my contrast, etc. as a standard raw setting instead of the changes I made in LR.  Some are showing....like vibrance, but "recovery" which I know is "highlights" in LR, and other things are not showing correctly.  I know that the options are different, but I don't want to use the ACR settings that it's using when I open the file, or have to go through them again.  I'm sure there's something I'm missing but can't figure it out.  Thanks for any help!

I quite simply did not comment on the issue of "it is supposed to be better to keep DNG files as opposed to NEF files now, right?"
The issue you raised in your original post, and the issue of choosing DNG versus NEF, are completely separate and independent.
The issue of transferring photos to PSE would cause the exact same problems in your case whether or not you use DNG or NEF.
On the issue of converting photos from NEF to DNG, there are advantages and disadvantages, some people do and some people don't. If you'd like to know more, I suggest you search this forum, there are plenty of discussions on this topic.

Similar Messages

  • When I use Firefox to monitor changes I do to HTML files locally, it does not show changes to images unless I restart the browser. Is this a bug?

    I have the local and the remote versions of a page open in two tabs. I change one of the images (keeping the same name in the HTML) and upload the changed image. The tab that shows the remote page only takes a refresh to show the change. The tab showing the local page not. I have tried opening it in a new window but it still does not change. Only if I restart Firefox does it show the change. Why? Is this a bug?

    grantheaslip's suggestion doesn't work for me; no change at all. (Thanks anyway.) Any other ideas? Is there another way to "hard" refresh? I don't see anything in the menu.
    Also, it seems like this is a very recent problem. I thought in the past that a regular refresh did the job.

  • Skin control in swf file created from indesign not showing online

    Hi,
    I used indesign cs5.5 interactive to create a swf file with embeded video and skin control.  When I view the video on my pc the video and skin control works but when I uploaded both the swf file and the skin control file  online to my client's server the skin control doesn't show. I suspect it has something to do with the path, is there somewhere I can specify the path to where the skin control is loaded online?
    Thanks.
    Natennove

    gp2011 wrote:
    The file does not open and asks whcih programI would like to open with when clicking the file.
    Which file - the .swf or the .exe file?
    If the .swf, you need to create a file association to the projector.

  • Bridge Preview Images not showing changes made in ACR

    Suddenly my raw (Nef) files in Bridge are not reflecting the changes I make to them. In other words after downloading from my CF card, I work on raw files in ACR either one at a time or sometimes applying changes across several pictures. The changed files show up in Bridge briefly and then revert back to the unchanged looking raw. All changes actually exist because if I open the file in ACR or PS they appear just fine. In Bridge however, no changes including cropping, etc. show up. When I open Bridge the files are fine for a moment and then they revert to the uncorrected raws. I can also go to View and hit "refresh" and they will all show the proper changes for an instant and then revert to the original state again.
    I've tried resetting preferences, purging and rebuilding cache, deleting temp files, removing and re-doing xmp files, expanding cache size and all the various rendering options in Prefs. Nothing works.
    I cannot use the Bridge Light box or Preview function to compare photos because the corrections I made aren't there to be seen. The only way to see them is to open each file one at a time in ACR. This problem has forced my workflow to a crawl as I have to edit one pic at a time without being able to compare two together. Any help would be appreciated.

    Hi All:
    I had similar problems plus constant crashes that made Bridge unusable.
    It drove me to try alternatives to bridge and to try Lightroom. I like
    Lightroom better than bridge but it has an operational limit that leads me
    to be reluctant switch. But here is the rub, now Bridge is working
    perfectly! What I think fixed Bridge is running a disk/registry cleaner
    called Ccleaner multiple times. I ran it almost every day for a week. It
    found lots of stuff in my registry that it didnt like but as time went by
    it found less and less. It also let me turn on or off services that run at
    startup. I shut off anything that I could see that I didnt need, like
    Adobe downloader; I dont need automatic downloading, as I can do it
    myself. The result is at some point Bridge started to work again. It has
    stayed working for more than 2 weeks now without one crash. I dont know
    what was fixed that did the trick but so far Im happy. Ccleaner is a
    free program and can be found at http://www.ccleaner.com/. Its a live
    program as there have been several updates since I started using it. Try
    it; I think it worked for me.
    John Passaneau
    PS
    After Bridge started to work again, I had to purge the cache and rebuild
    it. I use cache distributed to folders as I keep my photos on a network
    attached drive and access them from 2 computers and a local cache will not
    work for me.

  • Why jpeg file exported from Aperture with 300 dpi's it opens with 72 dpi's on PS ( image size)? I've tried several combinations and all give different results. And I am confused on what is the best workflow for me.

    Ok.
    My workflow is
    RAW > Aperture Library > export jpeg high resolution 300 dpi's > one file on PS > edit > Save us jpeg. The I realised that files from PS were being save in a smaller size from the ones exported form Aperture. That is when I went o see <image size> on PS and files were with 72.
    Since ten I've trying different things
    1. Aperture > export as PSD > open on PS > edit > Save us jpeg = small file (around 15 MB)
    2. Aperture > export as jpeg high resolution 300 dpi's > open on PS > CHANGE dpi's to 300 on <image size> edit > Save us jpeg = big file (Huge, actually)
    What am I doing wrong? Would someone give me guidance and tell me what is the best workflow, considering I edit photos to deliver to my clients and I shall give them 300 dpi's.
    Thank you

    This is a known Aperture issue: Problem with Aperture 3.6 preset exports. | Apple Support Communities
    Benjamin

  • Bridge Not Showing Changes made in Camera Raw

    Hi I work on an iMac (Mac OS X, version 10.4.11), and am currently trialing CS4.  My problem is that I have been processing Canon Raw files in Camera Raw, but when I view the images in the preview pane of Bridge, it is not showing the changes that I have made.
    This is just a sudden problem.  I have been working like this for ages in CS3, and it was even working properly in this trial version of CS4, but literally all of a sudden in the middle of processing a wedding shoot it stopped showing the changes.  So half the images now show the changes but the rest do not, and it no longer shows any of the changes I make in Camera Raw
    Does anyone have any answers to why this suddenly changed?
    Cheers Da     ni

    DaniJumbo wrote:
    This is just a sudden problem.
    "Sudden" is usually a sign to trash your suddenly corrupted preferences.  Hold down the option key as you launch Bridge.
    You may also need to Purge the Cache for each offending folder through the Tools Menu in Bridge.
    Also check your thubmnail  options:

  • Digital signature not showing in PDF when opened and printed with Preview

    Not being able to find anything after searching high and low, I thought I would try my luck here: when I certify a PDF file using a visible signature in Adobe Acrobat Professional that signature does not show when I open the file in Preview or print it from Preview. Preview's Inspector information also claims that I can make changes, which I instructed Adobe not to allow.
    Thanks for any feedback on this!

    Try re-uploading the PDF and then updating the course. Sometimes the conversion doesn't take and the tracking doesn't apply correctly to a PDF.

  • Files coming from photoshop not showing up in Lightroom

    I suspect I have some setting goofed up, but I looked at preferences, and don't see which one............
    In lightroom 5.3, I have some raw (.nef) images.  I assign them a keyword.  I open the set of images with that keyword (so, they all have the keyword).  Go into Develop, fiddle, then do an "edit in", and go to PS CC.  Make changes, then do a Save As, and save a .psd back to the same folder......
    In the past, MY RECOLLECTION is that the .psd I just saved, would be stacked with the original .NEF, AND would show up in the group with the keyword.  With the current settings, everything works fine EXCEPT the .psd doesn't show up in the keyword group.  When I get back to Lightroom, still in Develop, there is 'NO PHOTO SELECTED".  If I go back to Library it is not visible in the keyword group.  If I EXIT from the keyword set, and display all the images, I can now see the .psd AND it has the keyword set, but it doesn't show up in the keyword group until I exit from the group, go back to displaying all the images, then go back INTO the keyword group.
    And yes, I have "stack with original" set in the external editor preferences.
    Is this normal behavior in 5.3, or do I have something set wrong?  'Cause it's really slowing things down having to constantly go back to library, exit the keyword group, and on and on...

    Hi Rikk...  Just did a test.........
    Opened the keyword group of files.  Grabbed a .nef.  Went into PSCC.  Made some changes.  Did a "Save As", saved a .psd and the file did NOT appear in the set of files in LR.  Opened the entire folder of files, and the .psd is there, so it got imported back into LR.  Went back into the keyword set and the .psd does not display.  The .psd HAS the keyword on it.  Opened the folder, removed the keyword and added it again to the .psd.  Went back into the keyword set and the .psd is there...........................................
    THEN, I grabbed another .nef in the same keyword group, went to PSCC, made changes, and did a "Save As" as a .TIF.  Went back to LR and the .tif is displayed in the group just as it always has before.
    Back to PSCC and saved the same file as a .psd.  Back to LR and the .psd and .tif BOTH appear in the group. 
    Grabbed a THIRD .nef and went through the same process, did a "Save As" for the .psd and THAT .psd NOW appears in the group just fine.
    I have NO idea WHY it's working, but it didn't work prior to creating a tif, and it does work after creating a tif.  As near as I can tell, that's the only change since yesterday when it didn't work, and even after closing and reopening LR this morning, it still didn't work.  I'm reluctant to use the "since B followed A, A caused B", but it didn't work, it now works after doing a "Save As with a .tif".  Bizarre...
    Mollysnoot - I don't think so.  for the last (way too many) years, I've ALWAYS used "Save As" because I append the word "edit" on any file that's gone through the full processing in PS.  It's always worked fine.  The file created does get imported, and has the characteristics of the original.  If the original had a green label and 3 stars and was picked and had a bunch of keywords associated, the psd also had a green label, 3 stars, was picked, and had all the keywords.  And it showed up automatically in the group of files displayed by on of those keywords... 

  • Bex iView does not show changes made in web templates

    Hello,
    I have a Bex iView that presents a web template which is exposed in two portals.
    I made a certain change in the web template in portal A and I can see the change through the Bex iView in this portal.
    I than transfered the change to portal B and I can see this change at the Web application designer's code when it is connected to portal B.
    The problem is that I can't see the change through the Bex iView in portal B, it keeps presenting the old version of the web template. Also, if I preview it from WAD, which opens it in the portal, it shows the old version as well.
    <b>I've already tried/verified the following:</b>
    1. It's not a client related issue as it happens to all clients.
    2. I have tried clearing both the client and the portal's pcd caches.
    3. No cache whatsoever is configured in this iView's properties (Cache Level: None, Cache Validity Period: 0,0,0,-1, Allow Client-Side Caching: No).
    4. When I run the iView in debug mode in the application integrator I can't see anything unusual I can think of. Also, I can see there that it points to the correct web template.
    5. Retransported the web template from server A to server B.
    What else can be done here? Any ideas...?

    Hello,
    did you resolve your problem ?
    Best regards

  • Files pulling from same folder show up differently when uploaded to my site

    When I publish my html files on Adobe muse and I launch them from my file folder, they look great, but when I try to access them from my domain, the images are skewed and it looks awful but it is being pulled from the same location.
    I have published this site many times before and never had this problem.
    What is going wrong?

    I upgraded to the latest Muse version and after I republished I did not have a problem, maybe my computer was no longer compatible with the old one?
    In any event, it is working now. Thank you for your quick response. I appreciate it very much
    Casey Coughlin

  • Issue with Artwork not showing just blank when open

    Hi all weird one I have been using Photoshop CC 2014 x64 fine for a while now but recently have had items that I have left open e.g. 1.psd when I clikc on its tab doesnt show the actual work and any layer you select also wont show I have to use restore and maximise back to show but some still dont show have to do to each. Im using two XFX 7900 a I7 4770k 3.5 with 32GB memory and SSD Cahce and Storage Win 8.1
    Really getting unusable

    Update your video card drivers from the GPU maker's website.

  • DNG files created with LR4 do not show thumbnails

    Hi, 
    When using LR3 to create DNG files from my RAW files, those files would show me thumbnails of my image in Windows Explorer.  I am running Windows/7 (64) and have installed a CODEC from "Fast Picture Viewer" that allows thumbnails from RAW & DNG files to be shown.   It seems, however, that the thumbnails do not show for DNG's created with LR4.
    To Remedy this I uninstalled the CODEC.  Downloaded the most recent version and installed it but this did not fix the problem.
    I then went to the user forum for the CODEC product and searched for my problem.  I found a thread who's solution is to turn off "Embed Fast Load Data" when exporting to DNG and it fixes the problem.  I tried this and indeed it did fix it.  The responder went on to say ".....When this option is enabled the files created are no longer DNGs (just an undocumented private format of Adobe that no one else can read to this date)".   This statement surprised me as it is counter to what I understand Adobe created DNG to be.  Can I get some input on this comment as if true it is very troubling.
    My second question is that I see where to turn off the "Embed Fast Load Data" in the LR Export module, but where do I do the same thing in the Import module when I'm selecting import mode "Copy to DNG"?
    And, my thrid question is this.  If indeed the DNG files created by LR4 are proper DNG files and this CODEC is just flawed in some way, does anyone have a better way to allow image thumbnails to be shown in Windows Explorer?
    Thanks -- Dan

    Hi David,
    You testing does not coincide with mine.  I have consistently kept "Use
    lossy compression" turned off.  With lossy turned off, it seems that using
    Fast Data Load prevents the thumbnails from displaying whereas turning off
    "Fast Data Load" allows the thumbnail to be shown.
    Below is comment from Adobe confirming that they have yet to release the
    spec containing "Fast Data Load".
    From: Ian Lyons [email protected]
    Sent: Tuesday, June 05, 2012 12:29 AM
    To: Califdan
    Subject: DNG files created with LR4 do not show
    thumbnails
    Re: DNG files created with LR4 do not show thumbnails
    created by Ian Lyons in Photoshop Lightroom - View the full discussion

  • Why will CS4 not open DNG files converted from Olympus E-M1 raw files?

    For several years I have been able to use the DNG Converter to convert .ORF raw files from my Olympus E-M1 and then open them for processing in CS4. Suddenly CS4 quit recognizing these DNG files saying "Photoshop could not complete your request because Photoshop does not recognize this type of file"
    I have not changed any preferences. I'm using E-M1 v3.0, DNG Converter v8.3.0.141 on a Mac. I have deleted DNG converter several times, even reinstalled an earlier version but nothing changes.
    However, CS4 will open DNG files converted from Pentax raw .PEF files from my K-5. Weird. It's the Olympus raw DNG conversions that won't open.
    I can view the DNG converted files in question in Mac's Preview just fine but not CS4. Any ideas will be appreciated.

    Be sure the DNG Converter's compatibility is set to provide support for your version of ACR:
    Benjamin

  • When Exporting from LR4 to CS5, Image is Changed

    When I export my images from LR4 to CS5 using the Edit In... choice, I first get the ...may require the...Camera Raw plug-in version 7.0... which we all know doesn't exist. Not that that isn't annoying enough (I know - I can turn off the warning) but the image then presented in PS5 is not of the same quality as the one I am exporting from LR4. It's almost as if the Lightroom adjustments are not carried through. I have tried all three color space options to no avail. Also, I am not being presented with the dialog asking if I want to edit a copy with Lightroom adjustments. These are Nikon RAW files (.nef) that I am working with. Other images that are not RAW files do display the Edit Photo with Adobe Photoshop CS5.1 dialog. What am I missing here?

    There are other threads addressing this issue, but install ACR 6.7, which is available in release candidate on labs.adobe.com and you should get the same results from both apps.

  • HT4489 Hi all, I have .vcf contact file exported from yahoo and need to import it to cloud. When I try to import it I get an eror "53 contacts not imported, eror reading vCards". Pls help ty

    Hi all, I have .vcf contact file exported from yahoo and need to import it to cloud. When I try to import it I get an eror "53 contacts not imported, eror reading vCards". Pls help ty

    1 - Select  the thumbnail of one of the problem photos and use the File ➙ Reveal in Finder ➙ Original menu option.  This will take you to the folder containing the original file with that file selected by the Finder. 
    You can also use Find Any File to search for that file (get the file name from the Info pane in iPhoto). You will find the thumbnail version and maybe an edited version also.  Made sure what is found is the large, original version and note were it's located.  Search all of your drives with FAF just in case.
    If you don't fine the full sized version then the only recourse is to use a file recovery application like   SubrosaSoft FileSalvage on your drives to see if any of your full sized photos can be recovered.   If you find enough files to make the purchase of the software worthwhile buy it and recover the files.  However, since it may have been quite a while since you discovered the missing originals it seems unlikely you'll be able to recover any due to being overwritten.
    2 - book projects are just entries in the library databases and can't be exported to another library. 

Maybe you are looking for