DNG from Pentax K5 IIs not importing/displaying properly

I am runing LR 5.3 and PS6 on Win 7 Ultimate with latest updates as of 2/17/2014. Some of my DNG from the Pentax K5 IIs are not importing or displaying correctly. I have attached screenshots from LR/PS and Silkypix (Pentax Util) for comparison. Please let me know how to correct the problem. I will send the DNG file if necessary.

If the JPGs are sidecars then they’d be deleted along with any DNGs you choose to delete, so you’ll have to be doubly not lazy to get the JPGs to replace the bad DNGs.
I think if this happened to me the basic procedure I’d follow is, pending some other idea that would be easier:
Make sure the setting to treat RAW+JPG as separate files is OFF.
Mark/flag/rate/keyword all the bad DNGs with some unique designation, andif the JPGs are still sidecars then they’ll also have the designation.
Filter by that unique designation.
Select and move all these images to some other new folder from within LR using LR commands (drag-and-drop, right-click move). If the JPGs are still sidecars then they’ll automatically be moved along with the DNGs.
Remove these images from LR but don’t delete from the hard-drive.
Use an OS-level command to delete all the DNGs from that folder, leaving the JPGs.
Use an OS-level command to move these JPGs back to their original folder.
Turn ON the setting to treat raws+jpgs as separate files.
Synchronize the original folder with the Import new files setting enabled.
Import these JPGs.
Turn OFF the setting to treat raws+jpgs as separate files if you want.
This process would reset any develop settings you’d applied to any of the images because you’re removing them from the catalog. I think there may be plug-in that will synchronize settings from raws to jpgs but I’m not sure if it works for hidden sidecar jpgs or not. If you were to use such a plug-in then you’d need to do it before removing the images from your catalog.
This process is would not be easy to do if the corrupted files are scattered throughout your photos rather than in a single folder because you’d likely want to do the steps above for each folder separately.

Similar Messages

The html select box option is not getting displayed properly in IE11

The html select box option is not getting displayed properly in IE11
I have developed a website that has a select box drop down. The select box drop down is getting displayed properly in IE9. But in IE11, if I am selecting any option apart from the first one, the whole select box option is getting moved up in the page.
In IE11, if option 2 is selected, then the select options is getting moved up. But in IE9, if option 2 is selected, then the select options is getting displayed properly.
Please let me know the fix so that the select options are displayed in the same manner as in IE9.
Sorry but I am unable to upload images as this site is throwing some error

Hi Kevin Shen,
Thanks for post.
I tried above code in ie 11(version 11.0.9600.17633).
But it is not working. If you select option 2, and open select box then it open on the select box.
It should open below the select box.
Code for above:-
<select>
<option>1</option>
<option>2</option>
<option>3</option>
</select>
Sorry I could not attach screen shot. We have normal select box with three options. If we select option 2, it is showing option list on the select box. It is coming below the select box in ie 10 and other browse like chrome.
So what we should do, so that all options will come below the select box?
Thanks,
Yogesh Toke

Catalog id is not getting displayed properly in Foreign Language (French)

Hi All,
I have created a web service id for the external catalog and I have assigned the same to one of the user. The name of the web service id is getting displayed properly in the shopping cart creation screen when the language is English. But when we are changing the user language to Foreign language (French), the name is not getting displayed properly.
Could you please advise me if there any settings needs to be done in the parameters of the specific web service id. Thanks in advance for your help.

Hi,
Go to External Web Services and the select the web service ID. Then click on GOTO >Translation and select the language and enter the description of the web service as to be disaplyed while users log in French against the language.
Thanks,
Anshu

Pdf file in simply Chinese can not be displayed properly sometimes, how to solve it?

pdf file in simply Chinese can not be displayed properly sometimes, how to solve it?

Try a different pdf reader, like GoodReader.
Try switching your OS to Chinese (or English, if it is already in Chinese).
Verify that the pdf does display correctly on a full computer.

Unable to process RAW .PEF .DNG from Pentax K-7

I have the latest updates. Camera Raw 3.1, Aperture 3.0.2, OS 10.6.3... when i first import the images I can process them as normal. My RAW adjustments are available. But then after a few minutes aperture will update them and it will say the file has been processed by an earlier version (which is a lie because I have never processed them before) and there's a button to "reprocess". The images will lose all adjustments and have a green hue... no boost or anything. This is happening with both .PEF and .DNG from my Pentax K-7... which is running firmware 1.3
I've tried reinstalling aperture 3.0 but it's the same. I've also deleted raw camera 3.1 by:
sudo rm -rf /System/Library/CoreServices/RawCamera.bundle
and reinstalled... it's still the same.
what gives?

Hi, i have exactly the same issue on my computer, but with a Nikon D90. I just completely reinstalled system (OS, Aperture, Camera Raw) from scratch on new harddisk, no avail. Really mysterious, get indeed a weird green hue, and once image goes like this, there is no turning back. Still looking for solution as well - sorry!

Some of my clips from my camera are not importing into iMovie`

I just got a new video camera and I started using iMovie for my first time with it. It's a Panasonic DVD video camera. The first time I loaded my DVD into my computer with it, it imported all of my clips just fine. But now it seems, random clips will not import. When I get my import screen, where I can check and uncheck movies from my DVD to import into iMovie, some clips have thumbnails and import correctly. Other clips have no thumbnail, but instead just have the little "filmstrip" graphic on them. iMovie still knows how many seconds those "mystery" clips are, and it still acts as if it is importing them when I check them. However, they don't show up in iMovie when I go to edit them. They are not blank clips, they simply just don't show up. However, on my camera, ALL of the clips play fine.
Why is iMovie not gathering thumbnails/importing certain clips but it gathers thumbnails/imports the others? I know the disc and the camera is fine because the camera will play them, sound and video. What is up with my iMovie/computer?

I'd like to add that after I import these clips without thumbnails, iMovie does give me an error and say that they could not be imported. No explanation as to why, though. Again, they play fine on my camera.

I have just purchased the new iPad with the camera connection kit. I just want to view my photos from my SD card, not import them to the iPad. Can this be done and how is it done? Please advise. Thank you.

I have just purchased the new iPad with the camera connection kit and want to be able to view my photos full screen and not import them. Can this be done and how? Please advise. Thank you.

When connecting the Camera Connection Kit to a camera or SD card all you see are the thumbnails of the photos. I suggest you review those, select the photos you might want to see full screen, then import them to your iPad. After viewing them you can always delete them if you no longer want them on your iPad.
I also suggest Keeping the photos on your camera or SD card until you import the to your computer and back them up to at least one other location.

Itunes 11.0.1 not importing CDs properly

I have just updated to itunes 11.0.1 and now find that it won't import cds properly.
The import window functions as it should and the CD imports onto the hard disk. (I can find the files using Finder). However, itunes does not show the files. If I use the search within itunes I can see the album title. However, when I click on it, I don't get to the album. I just get all the albums on my mac. If I scroll down to where the album should be in the library (say B for Black Moses) then the music isn't there. If I click on the file in Finder, it plays in itunes but still doesn't show up in the library.
This has only happened with the last update and has happened with two separate cds (I haven't tried to import more). Does anyone have an idea what might be wrong? I have itunes match running on the computer too.
Thanks in advance,
Peter
[Start of Rant]
p.s. I know that Apple don't both reading or responding to comments on here, but seriously, your products are becoming a laughing stock. Apple maps is beyond a joke and iOS6 was total @@@@. Why can't you test products properly before releasing them? You are after all the biggest company in the world. There is no way I'm getting an iphone 5 and when my mac is eventually replaced, I doubt it will be with another apple product.
[End of rant]

This sounds like it might be a network problem.
First, quit then relaunch iTunes and see if that helps.
Second shut down the computer and pier cycle the Internet router and power up the computer. Let us know how those steps work.

Pages not always displaying properly

Hi. For some reason certain websites I use often as well as various others aren't always displayed properly (e.g. they often have the menu at the top/side and no main content). Sometimes refreshing the page a number of times or hitting back helps and other times I end up going off the site and going back to it later where there's about a 50/50 chance it will load fully.
I thought maybe it's because my Firefox browser needed updating, but after updating it I still have the same problem.
I cleared my browsing history/cookies/cache and it did nothing. Then I noticed under Options-Advanced-Network it mentioned the cache for offline storage, which I noticed was at 1GB (it seems to go up very quickly). I cleared it and the sites all loaded first time until I closed the browser window and re-opened it. Now no matter how many times I clear the cache, cookies or anything else it still refuses to display the pages properly.
On top of that I'm suddenly getting pop-ups for various sites (usually with a table of ebay or amazon items). They often appear when I click to type in a box on a site (e.g. in a search engine), but it happens randomly on any site and the window it opens always has a different address even if it is displaying a similar page. This too started when I still had the older version and is still continuing with the latest version. I have block-ups blocked.
A few weeks ago everything was fine and I haven't added any extra add-ons or done anything different in that time (as in surfing the web, editing browser settings or downloading new programs, or even editing existing ones). However, today I did update existing add-ons just to see if this was the problem. This has all started in the last week or so.
Any ideas as to what is causing these problems and how I can solve them?
Thanks

Thanks. Them links just suggest to do what I've already done though. I've cleared the cookies and cache and history. I've disabled extensions, themes and plugins to see if that affects it. I completely uninstalled FireFox and everything to do with it. I've done full system scans for viruses, malware and spyware and found nothing and I've even used CCleaner to make sure it wasn't a file affecting it that shouldn't be there. I've then re-installed firefox and I still have the same problem.
I also noticed that when trying to load a page I get a small message in a box on the left hand side at the bottom of the browser that says "Read static.ak.fbcdn.net", but I've only noticed it on one site, not others that don't load properly.

Importing From Excel file will not import assignments correctly where there are more than one assignment per task

I am trying to import an excel file ... see below. It appears if you select both Tasks and Assignments tables it will not allow you to do this, says file is not in a project recognized format. So I import Tasks tab first then run the
wizard again and import the assignments tab while selecting merge with project option. This works with one exception:
If there are more than one assignment per task. It does not merge in the 2nd assignment, only the first.
Is there a way to import a task with 2 or more assignments?
Background
To figure out what the format for the file needed to be, I started with a MPP file and from project saved as Excel and selected the "Project Template" file. Now I am trying to import that XLS to see how it works
ID
Active
Task Mode
Name
Duration
Start
Finish
Predecessors
Outline Level
1
Yes
Auto Scheduled
DS001
3 days
June 17, 2014 8:00 AM
June 19, 2014 5:00 PM
1
2
Yes
Auto Scheduled
MT001
3 days
June 17, 2014 8:00 AM
June 19, 2014 5:00 PM
2
3
Yes
Auto Scheduled
CT001
1 day
June 17, 2014 8:00 AM
June 17, 2014 5:00 PM
3
4
Yes
Auto Scheduled
CT002
2 days
June 18, 2014 8:00 AM
June 19, 2014 5:00 PM
3
3
5
Yes
Auto Scheduled
DS002
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
1
6
Yes
Auto Scheduled
MT002
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
2
7
Yes
Auto Scheduled
CT003
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
4
3
Task Name
Resource Name
% Work Complete
Work
Units
CT001
Engineer1
0
8h
100%
CT002
Engineer2
0
16h
100%
CT003
Engineer1
0
8h
100%
CT003
Engineer2
0
8h
100%
Andrew Payze

Andrew,
I did a quick test using your example although I didn't include the Predecessor or Outline Level fields to keep things a little simpler. I imported the Excel data into a new Project file with a single import of task and assignment data. It is very important
to set up the Excel Workbook correctly. On Sheet 1 I entered the task data (Name, Duration, Start). I did not include the ID or finish date as that is redundant - Project generates its own ID and will calculate the finish date based on the start date and duration.
On Sheet 2 I entered the assignment data basically just as you show it except I didn't include the Units.
The data imported as expected.
John

Preflight Setting Exported from Acrobat 9 Does not Import in Acrobat 8 - Help

I have exported a preflight setting so that another person can import it on his acrobat pro software. I have version 9, but my friend has version 8. And it does not want to import it.
How can I make this work?

Acrobat 9 Pro has improved preflight features. They probably changed the format of the preflight profiles so Acrobat 8 Professional doesn't recognize them. Your friend will need to upgrade.

Items from Gmail Sent folder not imported to Apple Mail during IMAP setup

Hi,
I just set up IMAP for my Gmail account. Now, although my Inbox folder got copied over to Apple Mail, the Sent folder did not.
Anyone know how I can copy this over too? Its just that I have lots of flagged items that I occasionally reference from the Sent folder.
Thanks.

I'm presuming you have webmail access? In the webmail environment, can you move those messages into another folder or into the inbox itself, then connect in the Mac Mail.app environment, the mailboxes/folders will synchronize, then drag-and-drop them into the Sent folder? And make sure that in Mail's Prefs, you have the "Store Sent Mail on server" checkbox checked?

Bex Maps from ESRI CD are not be displayed

Has nobody an idea?
Hello,
I have uploaded different country maps (for each map three files: .dbf, .shp and .shx)to the InfoObject 0COUNTRY. When I now run the query in excel or in the web I only get the whole world displayed, even I have only countries from europe selected. Then I have deleted all world maps in 0COUNTRY, but the reports still show the whole world map.
Have I to do some settings in the customizing or somewhere else?
Many thanks in advanced,
Benjamin
Message was edited by: Benjamin Alder

Hi,
try to go into infoobject (0country in your case?) and modify under "Bex Tab" shape files -> just delete the unwanted from there.
They will be deleted from server as well.
Regards
Standa

Multi Lingual String not getting displayed properly with Java 1.5.4

Hi,
I have a strange problem and i think the problem is due to java 1.5.4.
Problem is:
My application was previously deployed on weblogic6.1 server and jdk used was 1.3.1
After i migrated my application to weblogic 9.2 and started using jdk 1.5.4, i am not able to correctly view the data which is stored in different languages on browser.
Some more details:
OS - Linux.
Database - Informix 9.2
Intresting part is :
If i enter a new multi lingual string from my application (deployed on WLS 9.2 with JDK 1.5.4) and store it in database, and then try to retreive it, it is displayed correctly.
Issue arises only when the multi lingual string created and stored in database from my old application (deployed on WLS 6.1 with JDK 1.3.1) is retrieved and displayed in the new application (WLS 9.2 with JDK 1.5.4).
Hope my issue is clear and if any one has any clue as to how to solve this issue. Kindly help

One thread is enough.
http://forum.java.sun.com/thread.jspa?messageID=9651015

In a popup the tree table data is not getting displayed properly

Hi,
I have a taskflow which contains a tree table within a panelStetchLayout. Following is the taskflow code :
<af:panelStretchLayout id="SecurityAdminManageRoles" bottomHeight="0" topHeight="auto" inlineStyle="width:725px;height:400px;">
<f:facet name="center">
<af:treeTable value="#{bindings.WebCenterSecurityDCPermission.treeModel}" var="node" expandAllEnabled="true" fetchSize="150" verticalGridVisible="false" horizontalGridVisible="true" columnSelection="none" rowBandingInterval="0" columnStretching="last" contentDelivery="immediate" summary="#{uib_o_w_w_r_WebCenter.SECURITY_PERMISSIONS}" disclosedRowKeys="#{webcenterAdminSecurityBean.disclosedRowKeySet}" inlineStyle="border:none" binding="#{webcenterAdminSecurityBean.rolesTable}" id="tt2" styleClass="AFStretchWidth" autoHeightRows="150">
<f:facet name="nodeStamp">
<af:column width="260"
selected="false" noWrap="false" id="c3">
<f:facet name="header">
<af:outputText value="#{uib_o_w_w_r_WebCenter.LABEL_PERMISSIONS}"
id="ot5"/>
</f:facet>
<af:panelGroupLayout id="pgl26">
<af:forEach items="#{bindings.getRoleHeaders.result}" var="role">
<af:outputText value="#{role.value}" visible="false" id="ot1"/>
<af:selectBooleanCheckbox selected="#{node.dataProvider.serviceActions[role.value]}"
rendered="#{!node.dataProvider.serviceHeader}"
label="#{null}"
disabled="#{(node.dataProvider.readOnly and role.seededRole) or node.dataProvider.actionDisabledMap[role.value] == true}"
simple="true" id="sbc2">
<f:attribute name="permission" value="#{node}"/>
</af:selectBooleanCheckbox>
</af:forEach>
<af:spacer width="5" id="s2"/>
<af:outputText value="#{node.name}" noWrap="false" id="ot2"
inlineStyle="#{node.dataProvider.serviceHeader? 'font-weight:bolder;': ''}"/>
</af:panelGroupLayout>
</af:column>
</f:facet>
<af:column headerText="#{uib_o_w_w_r_WebCenter.LABEL_DESCRIPTION}" rowHeader="unstyled" noWrap="false" id="c1">
<af:outputText value="#{node.description}" noWrap="false"
inlineStyle="color:grey;" id="ot3"/>
</af:column>
</af:treeTable>
</f:facet>
</af:panelStretchLayout>
</jsp:root>
This taskflow is included as a region within another page :
<af:commandToolbarButton id="cb3"
shortDesc="#{uib_o_w_w_r_WebCenter.LABEL_EDIT_PERMISSION_HINT}"
icon="/adf/webcenter/edit_sm_ena.png"
text="#{uib_o_w_w_r_WebCenter.LABEL_EDIT_PERMISSION}"
inlineStyle="align:left">
<af:showPopupBehavior popupId="managePopup"/>
</af:commandToolbarButton>
<af:popup id="managePopup" contentDelivery="lazyUncached">
<af:dialog modal="true" type="cancel"
title="#{requestContext.formatter[uib_o_w_s_r_Spaces.EDIT_ROLE][pageFlowScope.o_w_wa_spacesRoleBacker1.selectedRole.value == webcenterAdminSecurityBean.spacesUsersRole ? uib_o_w_s_r_Spaces.LABEL_AUTH_USER : pageFlowScope.o_w_wa_spacesRoleBacker1.selectedRole.value]}"
titleIconSource="/adf/webcenter/empty.png" id="d4">
<af:region value="#{bindings.editroletaskflow.regionModel}"
id="r2"/>
<f:facet name="buttonBar">
<af:commandButton partialSubmit="true"
text="#{uib_o_w_w_r_WebCenter.LABEL_SAVE}"
actionListener="#{o_w_w_i_v_b_webCenterViewUtilsBean.saveChangesAndCloseWCLinksPopup}"
id="cb4">
<f:attribute value="#{bindings.editroletaskflow.regionModel}"
name="wcRegionModel"/>
<f:attribute value="bindings.saveRoles.execute"
name="wcMethodToExecute"/>
</af:commandButton>
</f:facet>
</af:dialog>
</af:popup>
In the main page, there is a table, I select one row and then click on this commandButton, which launches the popup.
The problem here is that when I launch the popup, there are many rows in the table and hence a scroll bar appears. Scroll down the popup and close the popup.
Again I launch the popup, I see that the popup displays in the same state as it was closed before, i.e the scrollbar is at the bottom and the first row is not displayed.

...also do not forget to:
1. adjust the Active property for the task flow binding (in the pageDef).
Set property value to the true on popupFetchListener, and to the false when closing popup
2. for the af:popup containing region, set childCreation to deffered

DNG from Pentax K5 IIs not importing/displaying properly

Similar Messages

Maybe you are looking for