DNG icon issues for Bridge

Recently, some of my folders in Bridge CS3 have had images replaced by DNG icons. Other folders still okay. Not sure how to go about getting things back to images in folders like before. Not a techie, so need really clear guidance!
Thanks!

Hi Old Goose (Where dod the name come from?)
If you have suddenly started finding DNG images in Bridge, then they are either being imported from your camera as DNG files, or you have converted RAW files into DNG. I'm guessing you would know if it was the second.
Do you use Bridge to upload images from the camera to the computer? In Bridge that means File > Get photos from camera which brings up this window:
You can see if Convert to DNG is ticked. It might be that Bridge imports both JPG and DNG depending on how your camera is set.

Similar Messages

Unable to Open Images in Bridge CS3 and Continuing Icon issues!

Re: Icon issues in Bridge CS3 and also with Photo Downloader that have never been there before.
So, these are the issues. Just one of the folders that previously would show thumbnails now only shows DNG icons, and none will open in Photoshop to let me work on previous image. Issue #2 - can't download images with Photo Downloaders - both my wife's Canon G9 only shows CR2 icons, and my Nikon D300 only shows NEF icons - neither of these issues had appeared before or been an issue. Third issue. None of my Bridge folders - even those with regular thumbnail immages- will open now - get a message that says words to the effect of Photoshop doesn't recognize this type of file. Computer is a Mac, with OS 10.5.8
I recently tried to make more room on HD, so must have taken some critical files/commands out by accident.
Thanks for your time and previous suggestions - still not working. I'm sure that in trying to correct things have made things even worse- as may be noticed by the two snapshots I've attached. The first is one from a library from my user section. The second library image is from my hard drive. Hopefully you and others aren't laughing or crying too much over what you see - redundantcy, etc! All of my energies have focused on taking photos, obviously none to proper setup/use of organizing things on my Mac. But after the laughing has stopped, any help will be tremendously appreciated - am most anxious to getting back to working with and saving images.
"user image"
Hard Drive image:
Thanks in advance

First of all, if you don't know much about how applications work inside of the OS, its wise to not look in the application folder(s). Deleting anything here can make your apps go haywire. If this happened, then you are best to 1)unregister photoshop, 2) uninstall your entire suite. 3) reinstall the suite and finally 4) reregister photoshop.
All images/textures/photo's including dng, cr2 and nef files need to be stored in your pictures folder and no where else, unless you're an intermediate user on your OS. In your pictures folder you can create folders for organizing the pictures whether by location, season's, time, or file format.
Then when you back up you can just drag a copy of the files to another drive including cd's or dvd's.
This will make sure you don't accidently delete important app files.
All this said, my OS of choice is Windows, so if anything does not sound right, thats why.
Hopefully this helps...

Issue with cisco ONS 15310. Slot with Ethernet ports, designed for bridging.

Hi, guys. I’ve got an issue with cisco ONS 15310 sdh optical network. I’ve got a special slot with Ethernet ports, designed for bridging. Assume, we’ve got to multiplexers, named A and B with ports A0 and B0 respectively. The ios console of these slots says, the configuration is as follows:
no ip address set on these ports
Ports are administratively up
Auto mdix
Bridge groups are the same on these ports.
Dot1q tunnel.
I’m trying to monitor a device with an ip-address connected to port B0. It answers ping if I connect the notebook directly to a device. But if I connect the notebook to port A0 and ping the device pluged in port B0 through the optical network, it doesn’t answer. I tried connections with straight and cross cable.
Guys, who set the network said, it should work as a point to point bridge with no extra configuration. But it doesn’t. I used wireshark sniffer to lookup what’s happening on port A0. All I see is cdp-s from port A0 and self-announcements of the notebook.
Any suggestions? Thank you in advance.

B
Building configuration...
Current configuration : 3712 bytes
! Last configuration change at
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname B
boot-start-marker
boot-end-marker
enable password -
clock timezone -
ip subnet-zero
no ip domain-lookup
no mpls traffic-eng auto-bw timers frequency 0
bridge 100 protocol ieee
bridge 140 protocol ieee
bridge 141 protocol ieee
bridge 142 protocol ieee
bridge 143 protocol ieee
bridge 144 protocol ieee
interface Loopback0
ip address 192.x.0.x 255.255.255.255
interface FastEthernet0
description -
no ip address
mode dot1q-tunnel
bridge-group 140
bridge-group 140 spanning-disabled
interface FastEthernet1
description --- B0 ---
no ip address
mode dot1q-tunnel
bridge-group 141
bridge-group 141 spanning-disabled
interface FastEthernet2
description -
no ip address
mode dot1q-tunnel
bridge-group 142
bridge-group 142 spanning-disabled
interface FastEthernet3
description -
no ip address
mode dot1q-tunnel
bridge-group 143
bridge-group 143 spanning-disabled
interface FastEthernet4
description -
no ip address
mode dot1q-tunnel
bridge-group 144
bridge-group 144 spanning-disabled
interface FastEthernet5
no ip address
shutdown
interface FastEthernet6
no ip address
shutdown
interface FastEthernet7
description -
no ip address
shutdown
mode dot1q-tunnel
bridge-group 100
bridge-group 100 spanning-disabled
interface POS0
description -
no ip address
crc 32
interface POS0.1
encapsulation dot1Q 141
no snmp trap link-status
bridge-group 141
interface POS0.2
encapsulation dot1Q 142
no snmp trap link-status
bridge-group 142
interface POS0.3
encapsulation dot1Q 143
no snmp trap link-status
bridge-group 143
interface POS0.4
encapsulation dot1Q 144
no snmp trap link-status
bridge-group 144
interface POS0.5
description -
encapsulation dot1Q 140
no snmp trap link-status
bridge-group 140
interface POS1
no ip address
crc 32
interface POS1.1
encapsulation dot1Q 100
no snmp trap link-status
bridge-group 100
router ospf 100
log-adjacency-changes
network 192.x.0.x 0.0.0.0 area 0
ip default-gateway [x.x.x.x]
ip classless
no ip http server
snmp-server community public RO
snmp-server ifindex persist
snmp-server trap link ietf
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps tty
snmp-server enable traps config
snmp-server enable traps cpu threshold
snmp-server enable traps entity
snmp-server enable traps syslog
snmp-server enable traps hsrp
snmp-server enable traps config-copy
snmp-server enable traps bridge
snmp-server enable traps ospf state-change
snmp-server enable traps ospf errors
snmp-server enable traps ospf retransmit
snmp-server enable traps ospf lsa
snmp-server enable traps ospf cisco-specific state-change
snmp-server enable traps ospf cisco-specific errors
snmp-server enable traps ospf cisco-specific retransmit
snmp-server enable traps ospf cisco-specific lsa
snmp-server enable traps bgp
snmp-server enable traps pim neighbor-change rp-mapping-change invalid-pim-message
snmp-server enable traps ipmulticast
snmp-server enable traps rtr
snmp-server enable traps mpls traffic-eng
snmp-server enable traps mpls ldp
snmp-server enable traps rsvp
snmp-server enable traps l2tun session
snmp-server enable traps mpls vpn
snmp-server host x.x.x.x public
control-plane
line con 0
line vty 0 4
password -
logging synchronous level 4
login
end

CR2 generic icon in Adobe Bridge instead of a thumbnail

Hi, Since buying Lightroom3 I find that I can only see a CR2 generic icon in Adobe Bridge instead of a thumbnail when I browse the folder containing my RAW files. Loading Lightroom3 may just be a coincidence.
I am using Canon cameras up to 5Dmk2 and PS4 software on my iMac. I have downloaded PS 11.0.2, Bridge3.00 and Camera Raw 5.7.0.213.
I have purged the cache for the folder. I have downloaded DNG converter 6.10.250 and processed the file but still cannot see the thumbnails.
Within Bridge preferences the Camera Raw Preferences is a light gray and cannot be accessed. Is this normal?
If I trash CS4 completely would I be able to reload from the original Cd and try again.
Grateful for any advice. Alex

http://forums.adobe.com/community/bridge/bridge_macintosh

Dng icons appear instead of thumbnails

Just recently, when I open up Bridge CS3, DNG icons appear instead of my thumbnails. I have not intentionally changed any settings, so don't know how to clean this up. Once I click on the icon, the photo opens up in Photoshop. Frustrating, since everything has been working fine up until recently. I am not a whiz with computer lingo, so will need real specific instructions!

And if this all is still not working quit Bridge, go to user library - preferences folder and manual drag the "com.adobe.bridge2.plist" file to the trash, then as per post 1 but first prefs and then after restart purge cache using the tools menu.
If still out of luck use the very hard way with manual delete the Bridge cache file. This will delete all your previous caching and that needs to be redone. Up to you to decide if this is worth it. I used it very frequently (once in 6 weeks) in CS3 but not anymore in CS4 :-)
If you want this then go the user library caches folder / Adobe / Bridge CS3 / Cache. Drag this folder to the trash (First back it up if you want so you can replace it if it is not working for you) and restart Bridge (again with option to refresh preferences) this gives you a very fresh start with a new empty cache folder :-)

Plug in Issue with Bridge and Photoshop

When attempting to access Bridge in Photoshop (CS5 Extended) I received the following message: "Could not complete the browse in Bridge command because Photoshop was unable to find the JavaScript Plug-in". I have never received this message when using Bridge. I do not know how to access the plug in file. I am not sure how to correct this issue. Any help would be sincerely appreciated. Thanks, DanOmaha
OS Windows 7 (64), Photoshop CS5 Extended, V12.1, Lightroom 3,

Can you open BRidge by clicking on bridge icon?
In bridge if you click edit/preferene/startup scirpts do you have a check mark for bridge and photoshop?

Cannot install latest updates for Bridge and Photoshop CC. Get the following message: Update Failed. The download appears corrupted. U43M1D207.

Cannot install latest updates for Bridge and Photoshop CC. I get the following message: "Update Failed. The download appears corrupted. U43M1D207."
I have tried to install at different times over three different days with the same result each time. My version of Bridge now no longer shows DNG files except as an icon. The update is supposed to install Camera Raw version 9.

I had the 204 version of your error using the direct download links proved on this thread solved my problem.. hope you have same success... had to log off/in cloud manager before it showed all apps updated
https://forums.adobe.com/thread/1825014

Dng icons not pictures

Hello everyoe,
Suddenly i don't get pictures from dng icons in Bridge CS4
Tifs and jpg show up nicely but for the dng, I see the pictures half a second and then they change into dng icons
and then the bridge icon becomes transparant. I can still open the dng's in CS4.though
There is however a notice: Suite Color Management is not enabled
I don't remember what i did updating or downloading anything to get this problem
Anyone know what I could have done wrong I don't want to go into the terminal...!

First check in PS menu about plug ins what version of Camera Plug in you
have, it should only be one and version 5.6 for the latest release.
Then restart Bridge holding down option key and choose reset preferences.
Check the creative suite color settings under edit - CS color settings (cmd
+ K) but I'm not sure you will have that, believe you must have at least 2
or more other applications from the suite like Illustrator and Indesign.
I don't remember what i did updating or downloading anything to get this
problem
Anyone know what I could have done wrong I don't want to go into the
terminal...!

HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit

Hello,
For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
The problem:
Printing: Currently receiving an "Error - Offline" message in my printer queue at all times.
Scanning: Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
Things I have tried:
Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
Uninstalled Drivers from CD-ROM, re-installed, countless times
Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
Installed Drivers and finding the printer myself through it's own static IP address.
Turned off firewall and attempted to print (after reboot), same errors
Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
Things I have not tried:
Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
You tell me
Curiosities:
I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
Weird that it is not recognizing the model number.
Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
Theories:
I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that.
Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.

Hi Zerosouls,
I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
Restart the computer after this step and try installing Hp Officejet 6600 again.
Please let me know what happens
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Camera RAW update issue with Bridge CS6

Hi folks,
I recently installed a routine update for Camera RAW 8.4 and now have a bunch of issues with Bridge including -
- No previews or ratings showing
- Ratings filter not working
- Can't open images directly into Camera RAW without first opening Photoshop (ie - keyboard shortcut not working and File menu command "Open in Camera raw" not available)
- Can't access or open Camera RAW preferences
I've tried resetting Bridge to default settings but didn't help and ACR still works fine opening in PS. I've attached two screenshots to show the problem better.
Anyone else having these problems? Any solutions?

This should fix it: Camera Raw 8.4 | No metadata or Camera Raw edit

Mini Bridge "Waiting for Bridge" error Macintosh

We'd been having this error on a couple of our computers and none of the steps in the KB article http://helpx.adobe.com/photoshop/kb/error-waiting-for-bridge-cs5.html are working.
We initally set up one computer to be used as our master image. Once we had things working the way we wanted on this computer we cloned the drive using Carbon Copy Cloner and distributed the master image to 3 other computers for testing. Mini Bridge was working fine on the master image. Once we cloned the master we changed the name of the default user account to our intended user's name following Apple's directions for changing user account names. Mini Bridge did not work on any of the user accounts on the cloned computers even those accounts whose names did not change. I even tried creating a new test account and it still does not work.
I've been doing some experimenting removing various Adobe related files and then trying to use the Mini Bridge until I figured out what worked. What I found was I could go to Library/Application Support/Adobe, and using Get Info, make the default user the owner of the Adobe folder. (They already had read/write permissions.) After that they are able to use the Mini Bridge. However, none of my other user accounts can work with the Mini Bridge since they are not owners of the Adobe folder. It seems that Mini Bridge is only able to function if the current user is also the owner of the Adobe folder?
I looked at the permissions on the master for the Adobe folder and it said it was owned by root and belonged to the admin group. On the cloned images it states that it is owned by the default user and belongs to the staff group. I tried using Terminal and changed the owner and group to root and admin as it was on the master, but that didn't make any difference. It will still only work if the default user is actually made the owner of the folder.
We will be cloning several more computers this way and I'd like to figure out why this is not working and see if there is a way to make it work for all users of the computer. I am sure something is happening with permissions on the Adobe folder when the user account is renamed on the clone, however I also did a group of 4 laptops this same way and those cloned computers all work fine under all user accounts.

Omke,
Thanks for the suggestions. I finally got it working today.
We've been using Bridge for quite a while but the Mini Bridge is new to us as we are just now updating to CS5. I did notice a bit of lag time with Mini Bridge and sometimes it didn't want to display the items on networked drives, but if I hit the backward and forward arrows it would work, so maybe just a screen redraw issue or something there, but other than that it seems to be working ok over our network for now.
Your tip about having only one copy of Bridge open at a time was the key. We have been able to open the same program on multiple user accounts simultaneously before, but I can't say that we have with Bridge. I didn't notice it at first but when you choose Mini Bridge in InDesign it is actually opening the full Bridge in the background though it doesn't open the Bridge window, but looking at my Dock I see where it has been launched. When I would switch to another user account to test the Mini Bridge I wasn't closing out of Bridge in the first account, since I didn't realize it was open, so I'm assuming since it was still open there it could not launch it under the second user. Once I closed out of Bridge on the first account it worked fine on the second.
So think we have it resolved now.
Thanks so much for the tip! This has been driving me crazy for a day and a half. Now I can get on with my other computer set-ups.
By the way, we are ok on the number of CS copies floating around, we have a volume license. :-)

Workflow issue with Bridge and everything else

Short and sweet. Well, not really.
I use windows - so as a result, for some reason unknown to man (after a decade of waiting), I still cannot see "previews" of most, if not all of any adobe software in the windows dialogue boxes.
think PDF's and the registry hacks we have to do to "enable" previews. But on a mac I can?
So I have to use bridge - a lot.
Now when I have a linked image in illustrator (or whatever) and choose "reveal in bridge" it will hunt and drill down through a multitude of folders and display the image in it's native folder - which I can then open in photoshop for instance - edit it - and Illustrator will detect the change and update. Awesome.
But aside from running a script to send a batch job to a program, it really doesn't "do" anything else that one would expect a "bridge" to do;
     I cannot create a "project" portfolio that would track a client project and all it's related documents.
     Or collaborate with a team.
     I cannot have non destructive edits of a document (such as using an instance of a file like lightroom does) - or "send copy to photoshop" and have Bridge stack the results.
     I cannot combine and tag collections of documents (make a database of stuff).
     I cannot ask Bridge to tell me which documents have placed documents, or (vice versa) which documents are placed into other documents - that would be so cool.
          imagine being able to select a jpeg or psd file and have the option to "Find documents using this file"
          or looking at a "project" and having a list of all first level documents with all their subsequent "placed content" listed all drop down expandable
So my beef today is that I finally spent an hour messing about thinking I had something "wrong" and went through Bridge CS6 with a fine tooth comb trying to find out if anything had changed.
and nope - it still doesn't behave as one would think it would.
Currently, I have some documents that require monthly changes to images, which for the most part came from one photo shoot, and all have essentially the same perspective, appearance, lighting and shading, but all different products and I have a folder of "preformatted images". So monthly I really only need to update the images, and a bit of text. Being posters, InDesign whines a bit for vector art manipulation, so I stick to Illustrator for this job.
But in Illustrator, I cannot choose another image to replace my linked image - without either;
     a: (reveal in bridge), select new replacement image - place as a new image, which then needs to be manipulated as the "old" image was, "remaking" all the adjustments, and then finally deleting the original linked image.
     b: (reveal in bridge) keep bridge open on the image I need (and it's name), go back to illustrator to open the "relink" windows dialogue and "blindly" browse till I find the image I want as shown in bridge.
     c: simply relink and browse blindly to find a file you can't see a preview of and guess, or drag and drop, or all the other non practical ways to replace the image.
Option B gives the desired end result where the image I have in a clipping mask, buried in a document in a certain way, with certain effects, is simply replaced without impacting anything else.
     But this takes quite some time when there are a lot of images.
So Bridge and its promised workflow functionality still isn't living up to it's purpose exactly.
Bridge isn't bridging.
With indesign, it's the same issue - you can't "relink" by revealing in bridge, choosing a "replacement" image and "update"
Maybe a "relink with Bridge" choice in the Links menu?
and in bridge, since Illustrator triggered the request, a button appears to "Replace" - once you finish browsing and highlighting the replacement image you need, just click it and it's done.
So two issues -
Why can't previews of adobe files be shown in windows explorer (still)?
     if they did, I'd really have no use for Bridge.
Why isn't bridge actually communicating with the apps connecting to it?
- and yes, I understand that I cannot ask bridge to go find a placed file and replace it with "this" file, but when illustrator "asks" for "this", bridge should be able to "respond" and give "that" since the app initiated the request.
Bridge should be a workflow tool as advertised - it should literally be able to be a proper workflow hub for all things adobe (and be able to catalogue and track all design file type previews - corel files, cad, 3d, etc)... but as it stands it's just a glorified windows explorer without workflow options.
Bridge hasn't been altered in years, and it's still lingering around - I think - so that we can simply see thumbnails, rather than just allowing each adobe program to make "previews" windows needs.
I can change metadata in windows, I can use freeware to change it extensively.
So aside from the "open in" options and the ability to browse all adobe file types, what's the point?

I couldn't read all through your post as I am jetting out of here.
Buy this:
http://www.fastpictureviewer.com/codecs/
and install it. It's relatively cheap. Screen shot is from Windows Explorer.
Handles ID, PSD, etc., files as well. Though the preview uses greeked text for the most part for the ID files.
Take care, Mike

Photoshop CS5 Issues & Mini Bridge Not Working In CS5

I have Photoshop Issues:
Mainly with copy & paste tools after a short period of time, tools start to function incorrectly for example.. Copy & Paste when working with identical images & wishing to select a part of the image to paste directly on top off the identical image they do not align up pixel by pixel I zoom a 100% in to see and ifs off shifted by 1 pixel out If I move it into place it jumps 2 pixels to the left and if I move to the right again 2pixels. I can't get it in the precise place
it normaly happens after Ive made a couple of pastes.. till I end up having to close & restart photoshop to get it functioning correctly. Is this a bug or am I using it indifferent.
Also the Clone stamp tool stops functioning after using the copy and paste tool after short periods. Example I copy then paste a selected part of the image back into the image then wish to the clone stamp tool to get the correct texture right.
And last issue is.. Mini bridge does not load I click browse images & it states "Waiting for bridge CS5.." ? Nothing happens
Windows Xp Media Centre Edition: (Service Pack 3)
staceyparish @ live dot co dot uk

It's worth checking to see if the "jumping" problem you have is because Snap is enabled. Snap causes Photoshop to try to auto-align things for you, and can look much as you've described. Check the View menu to see if Snap is checked. If so, either uncheck it, or hold the Control key down when you are moving things that you wish to align without snap.
Also, keep in mind that with the Move tool selected, you can "Nudge" a layer by one pixel at the current zoom level by using the arrow keys on the keyboard.
Can you list specific steps to reproduce the Clone tool failure? It might also be helpful for you to capture your screen showing the current state of the image, layers, and settings at the time you're seeing the Clone tool fail to work as you expect. You may have a setting wrong that someone will be able to see.
-Noel

HT201403 It would be very helpful for Apple to re-instate the view as icon option for a pdf file in an email on the right click menu? As far as I can see no easy way for a basic user to get this back?

Would be great for Apple to reinstate the pdf as icon in mail - but using the right click menu. It seems to have gone - and as a basic user there seems to be no simple solution - I used the rich/plain text swap but it didn't work...
Apple - we need you to solve!

http://www.apple.com/feedback/macosx.html
It's highly doubtful that Apple will change this in Mac OS X 10.7 since that OS version has now been discontinued for quite some time. Whether they will change that in OS X 10.9 or a future version I can't say.
If this is a serious issue for you, you can look into Attachement Tamer:
http://lokiware.info/Attachment-Tamer
It's not free, but it addresses much more than the issue of PDFs appearing as images, not icons, so it might be worth the price.
Regards.

T400 LCD screen is very dim, but icon lights for HDD, etc. are working

Hi - I'm wondering if anyone knows what the issue with my T-400 would be if the LCD screen is very dim. Details include:
- When I boot up, there's a faint outline of what is going on, but barely noticeable since the whole screen is very, very dim
- Video card is working okay, because I can operate the laptop when I plug in an external monitor
- The icon lights for HDD, power, battery, etc. are still working
Thanks so much for the help.

First a question: Is it a CCFL backlight or LED? If it is a CCFL, it could be just the inverter, which is a lot cheaper than the panel. If the CCFL bulb goes out, usually (but not always) there is a red tint to the screen for a while first. The LED backlights are less likely to blow and there is no inverter. (The LED backlight is DC and the inverter convers the DC to AC to drive the CCFL bulb) Do you know which kind of backlight you have? If you don't know, send me your full model and serial in a pm and I'll look it up. Don't post it in the open forum. Also, what were you doing when it went out? Were you doing anything except normal work, like taking something apart or hooking something up?

DNG icon issues for Bridge

Similar Messages

Maybe you are looking for