DNG Preview Not Showing Anymore

In the past few months, my ability to see the preview of a DNG file on my macbook pro (mountain lion - up-to-date) has been lost. I've been having some buggy issues with my computer, so this weekend I did an erase/clean install of Mt. Lion, and now I'm slowly adding everything back on. I have LR 4, and the CS5 creative suite (did all necessary updates last night on all software). I kept my fingers crossed that it's all I needed to do to finally see the DNG previews again. The major kicker is that I have access to all these files on another mac, with updated software, and I can view the previews just fine on it. Anyone able to help me? I've googled and searched for hours trying to find answers. Thanks!

If the DNGs are lossy format or you haven't installed the Apple Raw file patches then it's normal for the thumbnail preview to be missing. However, you've indicated that the same DNGs preview OK on other computers. So, these may not not be your probelm. I should also mention that there have been a few similar problems reported on the Apple Community forums over the years with no definitive solution. That being said, on the one occasion I've seen it happen in the flesh was where the files were located on an external disk drive (formated for Windows). At first I thought it was Windows related but the fix then was to set the disk permissions so that all users (everyone) had full access to read and write. Sadly, this fix didn't work for others, but it's still worth a try on your system.

Similar Messages

How to remove 1797 emails. stuck in inbox. but not showing anymore - and i have the same problem wit the sent. please help

how to remove 1797 emails. stuck in inbox. but not showing anymore - and i have the same problem wit the sent. please help

This is a user supported frum, so making threats really doesn't help, besides which it's not like any of us can really make a dent in Toshiba's bottom line despite how many people we think we can influence. Unless those people were standing in line to buy a Toshiba product cash in hand, and you pulled them out, it really doesn't add up for them.
At this point it would probably be better for you to use the 800 number. Have all your e-mails ready to forward, if needed, to whoever you end up talking to. Don;t let them off the hook. An hour on the phone is much better than weeks passing e-mails through a support site. Also contest the charge with your bank or credit card.

I highlighted a pdf with my ipad mini and when I opened it again half of what I did is not showing anymore....ideas?

I highlighted a pdf with my ipad mini using acrobat and when I got home and opened it again half of what I did is not showing anymore is it lost?
How can I recover all this highlighted notes?

You are sure you used Acrobat, and not Adobe Reader?
[topic moved to Adobe Reader for iOS forum]

After updating to Yosemite Finder does not show anymore office docs in recent history. Everything else ist displayed properly. Any idea? Thanks :=)

Hi there,
after updating to Yosemite the Finder does not show anymore office docs in recent history. Everything else ist displayed properly. I can see recent used apps or files but not the word files (which i use mostly) Any idea? Thanks :=)

Hi there,
after updating to Yosemite the Finder does not show anymore office docs in recent history. Everything else ist displayed properly. I can see recent used apps or files but not the word files (which i use mostly) Any idea? Thanks :=)

N8 Mass storage not showing anymore

I bought this phone on the 16th of feb but now mass storage is gone not showing anymore not even on PC... i did everything like installing latest software, restore, delete data and restore and hard reset but still not detecing mass storage. really appreciate if anyone could help.

@johnnyclark
Sounds as if you have done everything possible and now time for visit to Nokia Care Point unfortunately as sounds like possible hardware issue.
Happy to have helped forum with a Support Ratio = 42.5

Presets does not show anymore the live preview

The first three times I used Aperture 3, the "Presets" showed the live preview. Example : Presets/Color/Cross Process 1 showed a small image where I could appreciate before clicking. Now the live preview image is not shown anymore. I uninstalled Aperture completely and after reinstalling, it worked for a day or two. After that, impossible to get back the live preview. I'm working on the newest MacBookPro 17'' with 8GB Ram. I also installed the latest update of Aperture.
Can somebody help me? Thanks.

I had a glitch were all the adjustments and histogram appeared to be active at the same time as the quick preview was on. The sliders moved but no adjustment was applied. Maybe a similar problem? Allan

Illustrator document thumbnail previews not showing in finder window

I am trying to find a way to view Illustrator document thumbnails (CS,CS2,CS3 and CS4) in Finder windows. Other documents such as .tiffs, jpgs, etc and Word and .pdfs show but not Illustrator.
I used +show view options+ in the Finder, turning on and off show icon, show icon preview and show preview in column. The options seem to affect all other files but not Illustrator. All I get is the application icon but not the document thumbnail. Interestingly, I discovered if I manually delete the .ai extension the documents thumbnail appears, so I tried to turn off the +Show all file extensions+ in the Finder's Preferences. It changed other files but not Illustrator. Does anyone know how to accomplish this on a global basis without manually changing each files extension? It would allow me to the use of Quick Look on these files also. I did speak to Adobe and they thought it was an OS issue.

This is a 'known' issue. Try SneakPeek Pro

Print preview not showing values correctly. (single words are omitted)

Hi,
When viewing print preview of ME23n , it does not shows the values correctly.
It omitting the single words.
If its having 2 or more words, it displaying correctly
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
Any ideas how to resolve this issue?
Is there any thing to do with printer settings & configurations / netweaver admin point of view?
Best Regards.
Zerandib

Hi Zerandib,
By the way , since its a standard program, i think that code is out of our scope.
Me23N is a standard tcode but cusomters create Z-Program for printing by making a copy of standard.
You may please check upon the same.
Is it possible to check the results on a system where patch has not been applied ?
Regards,
Deepak Kori

Custom Quartz Filter In Preview Not Showing Up

In Snow Leopard, I could create a custom ColorSync profile to reduce PDF size (but not with quite as a dramatic drop in quality as the default PDF Reduce File Size) and it would show up in Preview as an option.
Now, in Lion, I still have the profiles, but they do not show up in Preview as a choice. I also cannot edit the default Reduce File Size profile in ColorSync as it is perma-locked.

Ok, got it now.
Needed to generate new filters (Kopy the normal Reduce File size and changed it)
Then I had to transfer them like midnightmac said.
And then it works. I reduced 11,5 MB to 2,7 MB with still accaptable results.
Thanks all together

Preview not showing photos after upgrade to 10.5.3

Hi
Since I upgraded to OS 10.5.3, my Preview program will open and seems to run properly...
Except that I cannot actually see the photo that is open. The Preview toolbar shows and I can select the various options. But there is no window with the photo in it.
Any clues?
I already deleted the related plist files in User Library/Preferences. This did not change a thing.
Thank you for your thoughts.
Dominique =)

Maybe deleting those plist files did work in the end - as this is the only thing I attempted to do to solve the issue, since I upgraded to 10.5.3 2 days ago.
It took a few minutes, but all of a sudden, my Preview application was working as normal.
=)

Aperture previews not showing up in media browser (and iweb)

some of my images in aperture projects do not show up in iweb or in the media browser at all....the projects are listed and most other project show all images, but some don't....
i tried several things including consistency check and rebuilding the entire library....nothing works....
this is very annoying...one of the few reasons (but a major one for me) to stick with aperture over LR is the system wide integration....but it has to work....

thanks for that info....i actually managed to fix it by rebuilding my previews.....but there was no reason at all for the previews not to show up....and it actually took 2 times to rebuild them all....some still did not show up after the first run....
i really hope we will see an upgrade soon....some things just have to be smoothed out....and a few added....

OSX preview not showing acrobat-created table of contents

I built a nice pdf bookmark tree/table of contents in Acrobat Pro. This has worked fine in the past. However oddly on this occasion while the table of contents looks fine in Acrobat, it does not show up in Preview. It's a 90 page doc assembled from MS Visio.
What's going on?
Anyone else coming across this issue?
Thank you!!

I'm running into a similar problem. In my case, I'm trying to add some bookmarks into an existing document using PdfBox 0.7.3. The original document was created with FOP 0.9.5 and Preview displays the bookmarks just fine. But after having added some bookmarks, Preview no longer shows any bookmarks!?
Oddly, Gnome Evince 2.22.2 and Windows Acrobat Reader 9.1.1 have absolutely no problems with the modified document. It might still be a problem with PdfBox, but then I would expect other viewers to fail as well.
If anybody has any ideas, I would very much welcome your feedback. Thanks!

Finder preview not showing avi thumbnails on macbk air

Can anyone tell me why my macbook air is not showing .avi thumbnail previews in finder on my macbook air but I can see them on my imac? Both are running macOSx 10.6.6 and I am using VLC player. The macbk air shows the orange cone but i can only see the viedo when I double click and open vlc player. I don't have to do this on the imac. Both computers are showing the same finder settings and vlc settings as far as I can tell.

I'm curious as to why this is working at all on your iMac. Is your iMac using VLC player for playing .AVI? Or does .AVI open in Quicktime using 3rd party .AVI QT plug-ins?
I have a Mac Pro and my .WMV and .AVI files all show VLC media player Orange traffic icons instead of pretty thumbnails. I've been looking for a solution to show thumbnail previews, but haven't found one and assumed it was a limitation of the VLC media player.

Video preview not showing?

When I try to preview a movie on my laptop, the screen comes up and it is just black - it's not showing the preview. Are there any settings I need to change?

What exact version of After Effects? What operating system?
Does the same footage play in Premiere Pro?
What are the details of the footage (codec, container, etc.)?

Some files not showing anymore in folders on smb-share (lc_ctype error)

I use a shared folder on my iMac for my work projects.
After the upgrade to Mavericks, I noticed that Dreamweaver CS 6 did not show all files and folders anymore in several projects.
This is on a Windows 7 machine.
The same thing happens when in FileZilla, so it's not a specific Dreamweaver issue.
When I go to a troubled folder in FileZilla I get this error (in Dutch):
"Een lokale bestandsnaam kon niet gedecodeerd worden. Zorg ervoor dat de LC_CTYPE (of LC_ALL)-omgevingsvariable juist is ingesteld. Totdat u het probleem oplost, kunnen er bestanden ontbreken in de bestandslijsten. Er zal geen waarschuwing meer getoond worden gedurende deze sessie."
Translation:
"A local file could not be decoded. Ensure that the LC_CTYPE (or LC_ALL) environment variable is set. Until you solve the problem, you are missing files in the file list. There will be no warning displayed during this session properly."
When I go to thew same folder in Windows Explorer all files are shown.
When I use Dreamweaver CS6 on the iMac no errors occur and every file just shows fine.
It seems it only occurs in random directories of the local files of website projects I maintain with Dreamweaver
If anyone ones how to fix this, I would realy REALY appreciate this.
This totaly kills my workflow.

Pages documents compatible with Windows Shares, because they are by default, written as single-file, compressed folders with .pages extension:
Pages ’09
Pages v5.5.1
Pages documents incompatible with Windows Shares, because they are written as uncompressed packages (folders). These need to be explicitly compressed (e.g. foo.pages.zip) by the user before deposited on Windows shares. (Right-click menu on Mac file icon)
Any Pages v5 document by default (or Pages v5.5.1 where optionally written as a Package file type)
Pages ’08, and Pages ’09 optionally saved as packages (folders)

DNG Preview Not Showing Anymore

Similar Messages

Maybe you are looking for