DNG Profile Editor: Can't create profile from JPG file

Guys, could you tell me why DNG Profile Editor fails to create color table using 4 colored circles ? It says "Unable to check white balance using gray patches. Please use the four color circles to identify the four corner patches of the chart and try again" even though I places four circles properly (it works with DNG files shot with my Nikon D700).
I created this DNG file from JPG file by opening it in Camera Raw plugin and saving as DNG file. Original JPG was shot on camera of Samsun Galaxy S phone. I know I'm crazy but I want to have color profile for it All patches are properly exposed after slight correction of Exposure slider in Camera Raw.
I'm using latest beta3 build
Here is link to DNG and JPG file I'm trying to use
http://www.box.net/shared/4v2rzlzjfp
Thanks!

If you convert your JPG to a DNG can you change the profile to the one you computed from the other JPG you converted to a DNG?
Profiles are not for JPGs. Profiles are for RAW files that ACR supports. You can't (easily/ever) get a RAW file from your Galaxy S and Adobe doesn’t' support that RAW format even if you could.
To see if your profiling is working, you can used the ColorCheck module from a trial version of Imatest that you download from www.imatest.com and look at the color-error.
You can also try the Read_Color_CC24.jsx script from Rags-Gardner:
http://www.rags-int-inc.com/PhotoTechStuff/ColorCalibration/

Similar Messages

Can't create PDF from Word file

I may be missing some functionality or that functionality may not exist.
I'm running Acrobat Pro 9.2 and MS Word 2004 (11.5) on OSX Leopard 10.5.8. I want to create a PDF from a Word file but NOT using the Print dialog. I want to either create it in Acrobat using File > Create PDF > From File or create it from within Word using the Acrobat menu/toolbar. This is so that it will end up as a tagged PDF.
However, I don't have an Acrobat menu or toolbar in Word. I thought Acrobat was supposed to have installed these into MS Office when I installed Acrobat. And when within Acrobat if I select File > Create PDF > From File and choose a Word file, I get a message "Acrobat could not open 'filename.doc' because it is either not a supported file type or because the file has been damaged". This happens for all Word files.
Looking in Acrobat > About Adobe Plug-Ins... under Convert2AdobePDF it says 'Loaded: no'.
Are these two methods of converting Word files to PDFs something that can only be done in the Windows version of Acrobat? Or is there a plug-in or update I can download to install this missing functionality?
Thanks for your help,
Mark

Keep your Office2004. But Office 2008 does have a way to create PDF's from within the word and excel Programs.
It works better than through the AdobePDF Printer, or through the Apple Print menus save as PDF. (Unless you have X.6.x Snow leopard)
One thing it gets around is a long standing Problem Acrobat has had with word and excel since Word 6.0.1.a/Excel 5.0.1a. Acrobat doesn't know how to interpert Word Page section Breaks. Chopping up a word/excel document in to multiple PDFs that have to be merged back together. MS came up with their own PDF Converter that gets around that problem.

Can't creat PDF from .DWG file

Using the world's most popular CAD program. Can't create a PDF from Adobe 3D. Apparently Adobe 3D wants to open the file using my AutoCAD, but thinks AutoCAD is not on my computer???

Hi SWS,
Didn't find it here, but found the answer by Googling and getting pointed to an AECBytes article from Feb '06, which had updated Revit 3D Capture settings (settings more updated than what Adobe gives you!).
It's too bad the rotation tool is so unweildy and that the walkthru isn't right there with rotation, pan & zoom (crazy - no idea why that is). I need these to work in Reader for regular people, not computer/cad savvy types. Adobe 3D seems to have just great potential, but doesn't seem ready for prime-time yet on the PDF recipient end yet. Maybe version 8 is more polished/joe-regular-user friendly (which is what it's billed as if it's for use in Reader.
Thanks again for your help.

Creating PDF from JPG files

I scan several pages from a book and wish to compile a PDF file from the scanned JPG files. What I want is the PDF file to be as small as possible, using relatively good JPG files (they are on the order of 300k), so that the fonts don't look too blurry when magnifying the image in Acrobat. My PDF file gets to be very big when creating a file composed of around 100 scanned pages. How can I make the file smaller?
I can't use optical character recognition to convert the text of the page. Much of the text contains mathematical symbols and figures, but is generally just black-and-white.
I feel the large file size of the resultant PDF file is due to all the "white space" of the JPG file. Is there some way to have Acrobat "ignore" the white when creating the PDF file, and then just display the information part of the JPG file on a white background?
Remember, I'm creating a PDF file from scanned textbook pages, not photographs. I would think that there is an optimum way to do this, keeping good resolution of the text (the "black" or non-white information), and minimizing the file size of the resultant PDF file.
Any thoughts?
I have Acrobat 8, Photshop Elements 6, and Windows Vista Ultimate.
Thanks

For starters, you should be sure and scan them as grayscale. Then the "white space" won't be an issue.
Basically the answer is going to be in your initial scan. You need to optimize the files as best you can there first then create the PDF.

Unable to use B2B Document Editor tool to create guideline from data file

Does anyone successfully used the B2B Document Editor tool to generate the guideline doc from an HL7 data file ?
I attempted to use the SpecGenerator feature of this tool to create a guideline from the "a01.xml" sample file in the HL7 tutorials (came with the B2B installation" and the wizard kept on giving me "parsing errors" message below
"The data in the file could not be parsed. Please check the file to verify that it is valid and formatted correctly. This error can occur for one of the following reasons: A) The data file may be a Word document or have some other binary format. B) The envelope data may not be formatted properly. If this is an X12 data file, please verify that the ISA segment is the correct size (exactly 106 characters). If this is an EDIFACT data file, it must have either a UNA or begin with UNB. For other standards, verify that the envelope segments conform to the specified rules. C) The segment/record delimiters in the file are incorrect."
Any idea why ? I did not alter the sample file in anyway -- its format is exactly the same as when it was installed.
Any helps are appreciate !!

Hi,
I would suggest that you learn the B2B product starting with the HL7 tutorial. Start by importing the export files and follow the instructions to make the system work end to end.
Next, you want to configure for the HL7 tutorial manually using the ecs and xsd files provided in the HL7 tutorial directory. Again, ensure that the system work end to end after you have done the manual configuration.
Next, you create a new ecs and xsd file using the Document Editor from scratch and use them in your manual configuration. You can use the same doctype and version as in the tutorial so that you can be familiar with the Document Editor and at the end of this exercise, you know you have done things properly if the system works end to end. The documentation for Document Editor is mainly in the Windows Help section.
After the incremental steps above, you will have the knowledge to implement the document type and version of your project. Going straight into the requirements in your project makes it difficult to debug because they are too many moving parts.
Hope this helps,
Eng

Workshop IDE can not create CTRL from WSDL file

Hi everybody,
For the evualtion of the Workshop IDE that comes with WLS 7.0 beta, I'm developing
a web service (via this IDE) which must interoperate with another web service
implemented with the help of another tool. I got the corresponding WSDL of this
"outside" web service (see attachement), and when I want to generate the corresponding
CTRL (via Add Service Control), I get the following error:
Error: Could not find operation 'sayHello' in portType ''
Prescription: The operation you are trying to bind was not found among the declared
operations. Please check your <portType> sections.
I do not have a lot of experience with WSDL files and its specification, but I
compared this file with another WSDL files that work with WORKSHOP IDE, and I
do not see difference between these files and the file that does not work. Moreover
the IDE error says that my service 'sayHello' can not be find inside the 'portType'
tags, but if you have a look at the WSDL file, you will see that is not true ?!?!?
Can somebody help me please?
Have a nice day
Vincent

Vincent,
What is happening is that the type attribute on the binding tag must match
both the targetnamespace and the name of the portType name attribute. Yours
do match in basename only. When parsing the WSDL file what we do is put the
name attributes of the portType, service and binding tags into the
targetNamespace of the WSDL and then we expect the references to these names
to also be resolved to that namespace.
In the case of your WSDL, your targetNamespace is
http://localhost:8000/HelloWorldApp/servlet/rpcrouter and the type attribute
on the binding attribute just references HelloWorldServicePort which means
it will use the default namespace of http://schemas.xmlsoap.org/wsdl which
is, of course, different than the targetNamespace.
To fixup the WSDL I would recommend you just define a new namespace at the
top of the WSDL file that matches the targetNamespace attribute and then use
that prefix in the text value of the attribute used to reference that name.
Yes, we do need to do some better parser/error messages to help identify
this :)
Here is one way that I have done to fixup your WSDL and Workshop does pull
it in and expose the methods correctly:
<?xml version='1.0'?>
<definitions name='HelloWorldService'
xmlns:soap='http://schemas.xmlsoap.org/wsdl/soap/'
xmlns:xsd='http://www.w3.org/2001/XMLSchema'
xmlns='http://schemas.xmlsoap.org/wsdl/'
xmlns:SOAP-ENC='http://schemas.xmlsoap.org/soap/encoding/'
targetNamespace='http://localhost:8000/HelloWorldApp/servlet/rpcrouter'
xmlns:test='http://localhost:8000/HelloWorldApp/servlet/rpcrouter'
xmlns:xsd1='http://localhost:8000/HelloWorldApp/servlet/rpcrouter/schema'>
<types>
<xsd:schema
targetNamespace='http://localhost:8000/HelloWorldApp/servlet/rpcrouter/schem
a'>
<xsd:simpleType name="java.lang.Integer"><xsd:restriction
base="xsd:int"/></xsd:simpleType>
<xsd:simpleType name="java.lang.Short"><xsd:restriction
base="xsd:short"/></xsd:simpleType>
<xsd:simpleType name="java.lang.Long"><xsd:restriction base="xsd:long"
/></xsd:simpleType>
<xsd:simpleType name="java.lang.Double"><xsd:restriction
base="xsd:double"/></xsd:simpleType>
<xsd:simpleType name="java.lang.Float"><xsd:restriction
base="xsd:float"/></xsd:simpleType>
<xsd:simpleType name="java.lang.Boolean"><xsd:restriction
base="xsd:boolean"/></xsd:simpleType>
<xsd:simpleType name="java.lang.Character"><xsd:restriction
base="xsd:string"/></xsd:simpleType>
<xsd:simpleType name="java.lang.String"><xsd:restriction
base="xsd:string"/></xsd:simpleType>
<xsd:simpleType name="java.lang.StringBuffer"><xsd:restriction
base="xsd:string"/></xsd:simpleType>
<xsd:simpleType name="java.lang.Byte"><xsd:restriction
base="xsd:byte"/></xsd:simpleType>
<xsd:simpleType name="char_lb_rb"><xsd:restriction
base="xsd:string"/></xsd:simpleType>
<xsd:simpleType name="char"><xsd:restriction
base="xsd:string"/></xsd:simpleType>
</xsd:schema>
</types>
<message name='sayHelloInput'>
<part name='message' type='xsd:string'/>
</message>
<message name='sayHelloOutput'>
<part name='result' type='xsd:string'/>
</message>
<portType name='HelloWorldServicePort'>
<operation name='sayHello'>
<input message='test:sayHelloInput'/>
<output message='test:sayHelloOutput'/>
</operation>
</portType>
<binding name='HelloWorldServiceBinding'
type='test:HelloWorldServicePort'>
<soap:binding style='rpc'
transport='http://schemas.xmlsoap.org/soap/http'/>
<operation name='sayHello'>
<soap:operation
soapAction='http://localhost:8000/HelloWorldApp/servlet/rpcrouter/sayHello'/
>
<input>
<soap:body use='encoded' namespace='urn:HelloWorldService'
encodingStyle='http://schemas.xmlsoap.org/soap/encoding/'/>
</input>
<output>
<soap:body use='encoded' namespace='urn:HelloWorldService'
encodingStyle='http://schemas.xmlsoap.org/soap/encoding/'/>
</output>
</operation>
</binding>
<service name='HelloWorldService'>
<port name='HelloWorldServicePort'
binding='test:HelloWorldServiceBinding'>
<soap:address
location='http://localhost:8000/HelloWorldApp/servlet/rpcrouter'/>
</port>
</service>
</definitions>
Thanks,
Art
"Vincent Ducret" <[email protected]> wrote in message
news:[email protected]...
>
Thanks for your answer, but I do not understand it, and also yoursuggestion.
>
According to WSDL specification, the 'type' attribute of a 'binding' tagmust
reference (bind to) an exisiting 'portType' tag. And it's the case here,no? I.e.
we have a 'portType' tag called HelloWorldServicePort, which is referencedby
the 'binding' tag named HelloWorldServiceBinding via its 'type' attribute:'HelloWorldServicePort'.
>
Where is the problem ?
Thanks a lot
Thanks for your help

Is there any limit on number of firefox profiles that can be created?

Is there any limit in the number of firefox profiles that can be created?
My issue is
I am currently doing selenium webdriver automation in linux for a device. There are 50 devices of same kind and framework will pickup a device depending on availability. I need to by pass unsigned ssl pages. I am using firefox 14.
I have implemented following but it is not consistent.
everytime a device is chosen
adds cer of device to the cert file in firefox profile
but I am getting sec_error_bad_signature very frequently.
So I started recreating cert [delete and create if by opening firefox] file for every run.
Now this is posing a problem if multiple devices are run at the same time. Hence I want to create separate firefox profile

Not that I have ever found. And at one time I had over 60 Profiles, but after I hit 20 Profiles listed in the profiles.ini file the launch time for Firefox became noticeably longer on WinXP. With remote Profiles, not listed in the profiles.ini file and launched strictly from command line there was no impact on launch time.
How or if that relates to Mac OSX is beyond my knowledge, never owned used a Mac.

Can't create PDFs from Word due to Cambria font. Help.

I'm using win 7 32 bit office 2010 acrobat pro 9. I can't create pdfs from word because of problems with cambria. I've ttried all the fixes I can find but none worked. Any more ideas?
[thread title updated by moderator]

How are you trying to create the PDF? With AA9 you have to print to the Adobe PDF printer or use the MS plugin.
When you say you cannot create PDFs because of Cambria, what error messages are you getting and copy them here? At this point we really do not know what you are having problems with or how you are trying to create PDFs.
In the future, please provide a topic to help folks that are stepping through all of the posts. A blank topic almost led me to simply skip your post.

Java.sql.SQLException: can't create statement from closed connection

java.sql.SQLException: can't create statement from closed connection.
at com.caucho.sql.QPooledConnectionImpl.prepareStatement(QPooledConnecti onImpl.java:411)
I am getting this error with my JSP's, i am running on Resin on Win2k, and MySql as backend.
Has anyone else also faced this issue ?
Looking for someone to help me to solve this issue.
rc

Looking for someone to help me to solve this issue.Maybe you are closing the connections. You might want to verify that you are not doing that. Or if you are that that is the correct way to return the connection to the pool.
Or you could have stale connections. Some databases will time out connections if the connection is no used in a while. (This is a good thing.) But this means connection pools must do something with connections that are not used for a while. The pools usually have a configuration option(s) which allows you to set up a keep alive message which keeps the database from closing the connection.

Can't create PDFs from Acrobat or Word?

Downloaded the 8.1.4 update and now I can't create PDFs from Acrobat or Word. If I try to create a PDF from the print menu, I get a message indicating that there are no print drivers for this...any ideas?

Thanks for responding. Yep, I tried repairing it...no dice. Then I realized that I'd re-installed AA Pro 8 (having completely given up on the AA Pro 9 upgrade that crashed my system) but not the updates. So I went through and re-installed each update. Still no dice. Then I did another repair. Nope. When I try to create a PDF via the print menu, I get a "Windows cannot print due to a problem with the current printer setup." This tells me that I have driver problem. But everything else prints fine, and I'm pretty sure Acrobat doesn't have drivers. I'm stumped...

Version 8.1 Can't Activate, Can't Update, Can't create/export NX *.prt Files to 3D PDF. Screen Capture feature does not properly represent Model/Bodies. Printing from NX does not recognize Adobe Acrobat 3D as a printer to try and export.

Version 8.1 Can't Activate, Can't Update, Can't create/export NX *.prt Files to 3D PDF. Screen Capture feature does not properly represent Model/Bodies. Printing from NX does not recognize Adobe Acrobat 3D as a printer to try and export.
I was able to register it though.

Not a surprise. The Acrobat 8 product family passed into End of Support back in 2011.
Be well...

Choose File Form Data Create Spreasheet From Data Files

I am following the tutorial for LC 8 and when I get to the topic titled "Collecting the data in a spreadsheet" it says to "Choose File > Form Data > Create Spreadsheet From Data Files".
However, when I try to follow that path I do not see a "Form Data > Create Spreadsheet From Data Files" menu option.
What am I not doing properly? How do I accomplish this task?
Thanks!

Thank you so much Paul. I have been trying all day to locate the method by which I could create a spreadsheet using the pdf submit route. I suppose the tutorial in CS4 should have been changed to reflect the changed explanations, but I guess that would be difficult to do. Anyway it worked and I can now do the analysis I need from my customers (lots of pupils!).
Best wishes,
Kevin Palmer

I downloaded the Acrobat 11 trial and I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

I downloaded the Acrobat 11 trial and I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

What OS? Have you tried a repair and updates from the HELP menu? The updates may be the key.

How can I create an csv/excel file using pl/sql and then sending that file

How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.

968776 wrote:
How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.You are trying to do it at a wrong place..
Whay do you want database (pl/sql) code to do these things?
Anyhow, you may be interested in :
{message:id=9360007}
{message:id=9984244}

How to create database from .sql file

how to create database from .sql file..?? i put the sintax query in a sql file.. and i want to call it in java code..
ho to do it..??

why do you want to do this from java?
i just don't see the point.
find your dba and have him/her run it for you

DNG Profile Editor: Can't create profile from JPG file

Similar Messages

Maybe you are looking for