DNG Profile Editor not working with new Profiles from LR 3.6?

I'm noticing that DNG Profile Editor is not really able to work with profiles from newly supported cameras, like the X10. Apparently the profile spec has been updated. Has DNG Profile Editor been abandoned or will it be updated to work with the new spec? I really hope it is!

Thanks. I am looking forward to editing the v4 profiles for the D700 - I just want to change a few colors in the existing profiles. I think the existing v4 profiles do an excellent job of matching the Nikon colors, but I don't like a few of the Nikon colors. Some colors have too much Red, but Red is too Orange.
I have selected a number of images that have colors I want to change. I selected the Camera Neutral (v0) and Camera Portrait (v0) and using the latest DNG Profile Editor I select the 18 colors from the Color Checker Chart. I then use the images that have the colors I want to change and determine which of the 18 points I selected from the Color Checker are close. I then edit those points - only 6 points. I only need to change the Hue by 5 units or less. I don't change any of the other selected points of the Color Checker, but feel that by selecting them I locked in the exisiting colors. Hope this is a good aproach.
I wish Nikon would do something equivalent to the DNG Profile Editor for their Picture Control profiles so they could be edited and loaded into the camera.

Similar Messages

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Home sharing does not work with new mountain lion update.

home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

Line-in not working with new driv

Has anyone else had issues with the line-in jack not working with new drivers? Is there a way to get it to work??Very frustrated. Is there a link to the beta drivers, they worked better for me then the new one.

The line input on the mini requires a 'line-level' signal, so the only microphones that work are ones that have an amplified output. Standard mics don't generate enough voltage to drive the mini's amplifiers.
That's the reason the mics work with the Griffin device (it has an amplifier) but not the mini directly.

Zen Micro Photo not working with new XP SP2 install

Okay so my Zen Micro Photo stopped being recognised on my computer about ten months ago when I upgraded to WMP (for BBC iPlayer - it's compulsory to have it). Anyway I li'ved with this and have now got thoroughly sick of the same songs and nothing new so I have done a fresh install (on a brand new hard dri've) of Windows XP SP2 WMP9 with the sole intention of using this install/hard dri've?for the player. I used the original installation disk and it prompted me to upgrade to WMP0 as I installed everything. There were no errors during the install and I rebooted when prompted to.
When I attach the player it is recognised by the machine (task bar icon and correctly labelled in System > Hardware > Device Manager which reports it to be?working okay) but the Creative media software says "player not attached" when it is. It is not visible on My Computer as a dri've so I STILL have no access to the player. Player screen reports "docked" with a logo and is flashes a charging icon. Driver v5.2.0.0. The player plays fine but hasn't had new music on in almost a year
There is nothing else on the XP install (IE6 and everything - argh!) I did the registry permission tweak thing mentioned?here:?http://support.creative.com/kb/showa....aspx?sid=9287?but it didn't do anything.
Any help greatfully received!

Re: Zen Micro Photo not working with new XP SP2 install. Have you installed this plug-in?
Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer
Filesize : 27.9 MBDownload

Siri not working with configuration profile

I am a Systems Administrator and we are using the Apple Configuration Utility to put profiles on our phones. We have our Wireless network, pass code and Exchange setup in the profile and ALLOW Siri and Siri while locked as well as all applications, TV, Downloads, Facetime etc. per our HR policy.
The iPhone 5's will not work with Siri when locked or unlocked even though it is allowed in the profile. The iPhone 4s phones do not have this problem. The only way we have been able to get Siri working on the iPhone 5's is to remove the profile entirely.
Has anyone else seen this issue? If so, were you able to resolve.
The OS on all of our iPhones is 6.1.3 which to my knowledge is the latest and greatest. Any advice or thoughts are welcome.
Thanks

So today I read on another post to close all the apps running in the background by double tapping the home button and deleting them. I did this and now Siri is working so it appears that one of the apps was intefering with Siri. Before that I tried disabling Siri and restarting and enabling again, changing the language to another English one, restarting the Network, every other tip I read except resetting all settings. This one closing all open apps working in the background was what did the trick.
I wish that there would be one central place where we could go and get the tips rather than to have to search through multiple postings. Something Apple could do to be proactive about helping us out. All in all I do love my iPhone 4s but that experience with Siri was unexpected. I should have read more before buying the iPhone 4s so at least I would have been prepared.

Camera not working on new profile

I have 3 profiles on this same Skype, on one laptop. 1 profile works fine but on second profile camera not working (video not showing), audio works fine. I created a new account (e-mail is same from second profile) and is this same - video not working. I dont understand what is wrong. This same laptop, this same camera, this same drivers/windows7, latest Skype, and from 3 profiles one working fine. Please help!!!

Try to reset all Skype settings.
Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old.
Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder.
Restart Skype.
N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

Logitech Pro 4000 not working with new Imac 24"

Just migrated from a G4 to the new Imac 24"
Cannot get the Logitech Pro 4000 to work with new mac.
Contacted Logitech and they said
"please note that the QuickCam Pro 4000 currently only supports up to Mac OS X 10.2.6"
However,the cam DID work ,even under 10.4.8 with the old G4...
Any ideas people..
Thanks!

Your nwe iMac is Intel based, which is why the old driver failed/ You could try the driver from IOXperts. They do not mention Intel support, but they do list your camera, and have a free trial.
<http://www.ioxperts.com/products/webcamx.html>

Isub not working with new imac

the help menu is telling me to make sure that the isub is plugged in, and then to make certain it is selected under sound preferences... the only problem is that the imac is not picking up that the usb is even plugged in- there is no isub option that comes up on the sound preferences.
the isub works fine on my older mac, but just is not being read on the new one. any guesses other than my old isub is obsolete with my new imac?
thanks
-pd

The iSub is sweet! It's the best sub I've ever had! There's no reason for it to NOT work with the new Macs. It's a bummer. I still have my iSub, maybe they'll start supporting it again someday.

Recovery did not work with new hard drive

The original Toshiba HD(250G, sata1) of my laptop( ) crashed.
I bought new one (320G, sata 2, Western digit )
The problem is that, when I tried to use the recovery CD that I used to use it with old HD before, it did not work with this new HD well!?
After cd1 and cd2 finish installing it ask to take it out then restart, I do so, but when it comes to setup setting of windows.
An error message come out says " Windows Setup could not configure Windows on this computer’s hardware”
It restart and says again " Windows could not complete the installation. To install Windows on theis compuiter, restart the installation."
I have been trying to solve this a lot, but no way
I tried what in this link, but it drive me with another problem http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-could-not-complet...
I hope that I get the right thing to do, from ur forum by this post.
Thanks a lot

Did you folks search here for "advanced format drive"? People have had numerous weird problems with the new advanced format hard drives in older Toshibas. I can't look up all the threads for you. But here is one:
http://forums.toshiba.com/t5/System-Recovery-and-Recovery/Recovery-won-t-work-on-new-upgraded-hardri...

Xml code not working with new version

Hi,
my following code is not working with the xalan 2.7.0 version. Any one can help to convert this to work on new version.
import java.io.*;
import java.util.*;
import org.xml.sax.*;
import org.apache.xalan.xslt.*;
public class XML2Edifact
public static void main(String args[])
throws SAXException, IOException
if(args.length < 3)
throw new IllegalArgumentException(
"Usage is XML2Edifact in.xml xsl.xsl out.edi");
InputStream sin = new FileInputStream(args[0]),
sxsl = new FileInputStream(args[1]);
OutputStream sout = new FileOutputStream(args[2]);
EdifactFormatter formatter = new EdifactFormatter(sout);
XSLTProcessor processor =
XSLTProcessorFactory.getProcessor();
XSLTInputSource in = new XSLTInputSource(sin),
xsl = new XSLTInputSource(sxsl);
XSLTResultTarget out = new XSLTResultTarget(formatter);
processor.process(in,xsl,out);
}

Solved, had to repair the Z10 with the PC! Would have thought that upgrading software would have saved the environment so that this step was not needed (played with this for several weeks on-and-off).

Printer not working with new router

I have a new router and my laptop with Windows XP is working Ok
My printer Deskjet 3520 network test result shows successful setup But it does not print when laptop requests
What can I do

Hi @Jobrig,
Welcome to the HP Forums!
I see that your HP Deskjet 3520 is not working with your new router, and I am happy to help with this connection issue!
For further assistance, I will need to know: if you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos, and if the printer is able to make copies.
In the meantime, please see the following:
This printing guide, Print Jobs are Stuck in the Print Queue.
This website, HP Wireless Printing Center, may also help.
Hope these guides will help you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Satellite A110 - WiFi switch is not working with new WiFi card

Hello Everyone
I have a problem with my Toshiba Notebook Satellite A110-178 (PSAB0E). I replaced the original WIFI card Intel 3945abg with Intel Link 5100 and on the new wifi card wifi hardware switch is not working.
New wifi card is discovered and drivers working correct but when I try to scan for wifi networks with IntelPro/Wireless software I have message to turn on hardware switch but it's turn on and not work. On old wifi card swich is working correct - orange light is on. On new card light is off and swich is not working.
Please help

Hi
Maybe you could enable the Wlan card using different way;
Go to device manager -> WLan card properties -> Advanced tab
There you could check if there is a option which would enables the WLan.
Its worth a try
Otherwise its a compatibility issue like suggested by PinkPanther
I read in different threads that this could happens if there is a different pin assignment on miniPCI WLan card and this could not match with the miniPCI slot on the mobo...

Hp Photosmart not working with new router

My Hp Photosmart D110a will not work wirelessly with my new Netgear N600 router. This is the second new router I have tried. With the first one Belkin I could at least get it to print from my PCs. But never with my IPad. Now the printer will not print from anything. I have reset it, entered new passwords etc. spent hours on the phone with tech support. What to do now?

@Ann99, welcome to the forums
I understand your Photosmart D110a model is not working with your new router. I will gladly do my best to help you.
I have some questions and some things for you to try.
1. Is the printer connecting to the wireless network successfully when you run the wireless setup wizard from the printers front panel or is the printer not found when you are running the installation from your PC?
2. What did tech support determine the issue was when you called them?
3. Here are some guides for you to try, these 2 guides relate to the questions I had asked in the first question:
Unable to Connect to a Wireless Network When Using WEP Encryption and Shared Key Authentication
The Printer Is Not Found During a Wireless Network Installation
4. What Operating System are you running on your computer?
5. Where are you running the installation from (disk, download or HP Printer Install Wizard for Windows for Windows)?
Please let me know all of the information and results from your troubleshooting above!
Have a terrific day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

WRT54G v6 not working with new Motorola SB6141 on Comcast (IPv4 and IPv6)

My WRT54G v6 not working with a new Motorola SB6141 Cable Modem on Comcast (IPv4 and IPv6).
Yesterday, I had my old DOCSIS 1.1 cable modem and the WRT54G had been working just fine for the past 8 years.
Last night, I swap in the DOCSIS 3.0 SB6141 cable modem, and now the WRT54G keeps losing the internet connection. When I go into the status page for the WRT54G, I often do not see DNS servers and sometimes do not even see an IP address.
If I connect a PC directly to the SB6141 cable modem, I have no problems whatsoever. But whenever I connect through the WRT54G and power cycle both devices, then I have internet connectivity for about an hour before it drops out. I have noticed my gateway IP address and DNS servers change at that time as well. I can also force the Linksys to lose connectivity by doing a DHCP release/renew on the Linksys status page.
Is this behavior because of the dual stack (IPv4 and IPv6) coming through the cable modem from Comcast now? Is there any way I can keep using my WRT54G v6 now that I have the SB6141 cable modem?

You just have to install it correctly.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&login=1&app=search&vw=1&articleid=3686

DNG Profile Editor not working with new Profiles from LR 3.6?

Similar Messages

Maybe you are looking for