DNG won't convert CR2 files from Canon 30D

I have installed Camera Raw 2.4 and also DNG converter. But when I try to convert Canon 30D CR2 raw files the DNG converter simply says: The source folder does not contain any supported camera raw files. Have also tried dragging an individual image onto the icon, as instructed, but get same message: Can anyone perhaps help? Thanks.

You should always use the latest version of the Adobe DNG Converter, currently the Adobe DNG Converter 5.3, available here:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4369

Similar Messages

PSE 11 won't open CR2 files from Canon PowerShot G15.

I was interested in PSE 11 so I could use ACR 7.x to open the raw (CR2) files from my new Canon PowerShot G15 camera--but even after updating the files, PSE 11 won't recognize my camera! It's still not listed in the group of supported cameras on the Adobe website(s). This camera has been out for a few months (at least!), so it's unbelievable that Adobe still won't support those files. They only go through the G12, not up to G15.

See that other current post :
http://forums.adobe.com/thread/1104750?tstart=0

Converter not finding CR2 files from Canon 5D III

I installed v7.1 of the dng converter to convert CR2 files from a new Canon 5D Mark III for use in Lightroom 3.6. However, the program does not recognize the CR2 files whether in the original folder on the camera memory card or transferred to a folder on my hard drive. The Canon Digital Photo Pro will open the CR2s so I know they are good files. Any ideas? [OS is Windows 7 Pro]

If you ever need to convert just one image or a few images, you can just drag those images onto the icon for the DNG converter, and it will open and convert those images.

DNG converter not converting RAW files from Canon 70D.

DNG converter not converting RAW files from Canon 70D (it does not see them). I tried DNG converter version 8.2 and 8.4. No success. I use iMac. What is wrong?

hopefully, that's a typo on adobe's website because they list the canon 70d as using a .cs2 file extension, http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
i don't see any other camera that uses a .cs2 extension and i don't see other people having problems, so that probably is a typo.
in any case, cr 8.2 or better is able to convert your camera's raw files. why you are having a problem i can't say, but double check that you are navigating to the correct folder by adding a file that will show up in your dng converter.

Photoshop CS5.1 won't read raw files from Canon EOS M

Photoshop cs5.1 won't read raw files from canon eosM, what to do?

The EOS M requires at least Camera Raw 7.2 but Raw 7.2 is only compatible with CS6 or higher (CS5 is only compatible up to Raw 6.7)
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
To open and edit Raw files, either upgrade to CS6 or join the Cloud and get the CC version.
Alternatively convert the Raw files from the EOS M to DNGs using the free DNG converter then edit the DNGs in CS5.1
http://www.adobe.com/products/photoshop/extend.displayTab2.html
See also the Camera Raw FAQ
http://forums.adobe.com/thread/311515?tstart=0

Mac does not recognize CR2 files from Canon T2i

First, I am posting in this forum because I need help for a problem that I think only experienced photographers could answer, even though I don't use Aprerture (or iPhoto).
I borrowed a friend's EOS-1D Mark II and shot using the camera raw format. My Mac could see the files and even open them in Preview. I am using PShop CS3 on a Mac running 10.5. Because of this, I have to use Adobe DNG converter so I could open them in Photoshop. I cannot afford to upgrade either the OS or Photoshop right now.
I decided to start shooting in the raw format with my EOS Rebel T2i. I formatted an SD card and changed the camera's settings to shoot RAW. When I moved the files to my Mac to open them, instead of thumbnail previews, I saw 'exec' icons, even though the file extension says .CR2. I tried to convert them with DNG Converter, and it said there were no recognizable files to convert. I changed the setting in the camera to save the file as both a RAW and jpeg file. The CR2 file was still not recognized, but the jpeg is.
I thought installing "RAW Camera Update 2.7" from Apple's website would solve the problem. (Currently, "RAW Camera Update 2.1.2" is in my Library.) The problem is that ver. 2.7 requires either Aperture or iPhoto 9, or my Mac won't install it. I don't think the issue is with the 3rd party software, because the Mac 'sees' the image files taken with the Mark II, but not the T2i.
I am stumped.

I solved my problem through dumb luck, but maybe it will help other people who are still using CS3:
I had used the version of Adobe DNG Converter for the CR2 files from the Mark II: version 5.4 for CS3. On a whim, I decided to try downloading version 6.2 for CS5. It is a stand-alone app, and if it didn't work, I could just uninstall it. or it simply wouldn't install.
A funny thing happened:
I ran the installer successfully, but when I checked my applications folder, it said I still had version 5.4, and a search for version 6.2 only showed the dmg. Huh. So I dropped a CR2 file on the icon of the version I still had, and it converted! Yay!
The CR2 files still have the 'exec' icons, of course, but once the file is converted to dng, the thumbnails are there.
Canon said it was up to software developers to make things compatible, and apparently the only difference between the RAW file for the Mark II and the T2i, for instance, is a tag buried deep in the file that IDs the camera it came from. I could have used the software that came with the camera, but it converts the CR2 straight into a jpeg, and I want to open it and make adjustments with Photoshop's RAW/DNG editor before opening it in PShop proper, to preserve the most information I can. I am mentioning this only because Canon's suggestion was to use their camera's software, so that is an option, but imo, it defeats the purpose of using RAW to begin with.

CR2 files from Canon 70D in Elements 11 on windows Vista

I cannot get Photoshop 11 to recognize (open) CR2 files from my Canon 70D camera. Running Windows Vista. Is there an update for this for Vista.

Photoshop Elements 11, you mean?
The 70D requires Camera Raw 8.2 or later
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
8.2 is only compatible with Elements 12 or later
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Either
upgrade to Elements 12, or
Download the free Adobe DNG converter, convert all the Raw files from the 70D to DNGs then open the DNGs in Elements 11
http://www.adobe.com/products/photoshop/extend.displayTab2.html

When will Elements11 support CR2 files from Canon 70D ? Or is an upgrade necessary ?

As it is now RAW files from Canon 70D is not recognized by Elements 11. And Adobe don't ship any upgrade, only to Lightroom and PCC/Bridge. Is there a workaround ?

PSE 11 will not be upgraded to support this camera. You need either:
Purchase PSE12 or PSE13 ... or ...
Download and install and use the free Adobe DNG Converter version 8.2 or later, convert your RAWs to DNG and then import the DNGs into PSE 11

.CR2 files from Canon DSLR

I have been importing .CR2 files from the flash memory card via a Promaster CF Card Reader.
This has been working very reliably into iPhoto for several months.
Yesterday I got a message that the file type was not recognized.
Now I can't get them to load without taking them through the "back door" first.
Did something change in iPhoto just recently?
I have not changed the OS in the camera, am using the same CF cards, the same computer, the same iPhoto version.
Doesn't make any sense.
Help.

Now I can't get them to load without taking them through the "back door" first.
What's the "back door"?

CR2 files from Canon Rebel XSi won't open in CS2

Ok, so I have a powerbook G4 with Tiger Mac OS X and CS2 student version. I am basically computer illiterate so feel free to state the obvious here.
I bought a new Canon Rebel XSi and have been shooting raw CR2 files. I have done this in the past with a Canon EOS 1D Mark II and never had a problem... now the error window pops up saying my file is unrecognizable. I did the only things I know how to do which was to check for updates and verify permissions in disc utility - this did not help.
Still thinking it was my computer or the software I backed everything up and wiped the hard drive clean by erasing and reinstalling the original discs and then reloading CS2 and again doing all of the updates - this did not help.
I have spent 3 days reading in these forums and trying to clear caches and download DNG's (by the directions into the right library) and still it does not work. I even downloaded trial versions of CS3 and CS4.
Now I'm sure my computer is a downloaded mess and I still have no access to my raw files!
Please Please Please help me!

You're welcome, Nikki.
 
 >what do you do with the paper with a hard drive icon on it when you download something?
 
 I assume you mean the
disc image file with a ".dmg" extension.
 
 Personally I keep any such disc image file if its contents prove successful and discard it when a new version comes along that also proves to work OK. Otherwise, I delete them right away. It's your choice. I prefer to have the dmg file around in case I have to install its contents again for whatever reason without having to download it again.
 
 That being said, I don't keep anything on my desktop,
ever. I download everything to a "Downloads" folder inside my Documents folder.
 
 Here's what my desktop looks like all the time:
 
 c
<a href="http://www.pixentral.com/show.php?picture=1ZQIZTgWF1p8WGN7XZXagCudsu4SWI1" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1ZQIZTgWF1p8WGN7XZXagCudsu4SWI1_thumb.jpg" border="0" />
 c Click on the thumbnail, then scroll horizontally. It's a very wide screenshot across two side-by-side monitors.

Bridge CS4 won't open RAW files from Canon 70D

I have Photoshop/Bridge CS4 which used to read CR2 Raw files fine from old Canon 30D@. I've just purchased a Canon 70D. Bridge CS4 will read the MOV video files fine, but not the Raw CR2. I've downloaded and installed Adobe DNG Converter 8.5, but when I open it and it asks to open files to convert, the CR2 files are still unreadable and greyed out. I'm on a Mac OSX 10.9.4. Is there some way I could preview RAW files from the 70D in Bridge CS4, and open in Camera Raw?

You need to upgrade to PSE12. Alternatively, download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software) You could also use the Canon software that came with your camera to convert to tiff, which would open in PSE11.
Windows download (.exe file) click here DNG Converter 8.2
Mac download (.dmg file) click here DNG Converter 8.2
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

Cr2 files from canon 1d-mk3

does anyone know how to import cr2 files directly from a canon 1d-mk3 into aperture. that is, without first batching photos in dpp to tiff/jpeg, but directly sending the cr2 material from camera to aperture?if you have the answer, please email to [email protected], but by all means post it as well.

Photoshop Elements 11, you mean?
The 70D requires Camera Raw 8.2 or later
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
8.2 is only compatible with Elements 12 or later
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Either
upgrade to Elements 12, or
Download the free Adobe DNG converter, convert all the Raw files from the 70D to DNGs then open the DNGs in Elements 11
http://www.adobe.com/products/photoshop/extend.displayTab2.html

CR2 files from CANON will corrupted when preview by Adobe bridge

Hello Frides
This problem started for me since Sep 2012, on CS5 and CS6
Windows 7 Ultimate
64 GB Ram
Quad Core i7
ACR 7.3
ACR 6.2
Camera Canon 5D M2
The problem is when I preview my archive files it corrupt the as well; I can see the CR2 file using ACDsee Pro 5 but when I convert them to Tiff or JPEG it export the corrupted file.
The scary part is if I'm losing my archive CR2 files,
I can’t open these file in Canon Digital Photo Professional after they damaged with Adobe.
This evening I was working on a photo and export it as Tiff , when i change directory in Bridge the same CR2 file corrupted!!!!!
I delete the XMP file associated with the CR2 didn’t help, its look like when bridge try to update the thumbnail somehow it
I tested on my portable workstation
Lenovo w701ds
16 GB Ram / i7 QC / Window7 Pro
stil get this random problem.
CHecked the CF card / Card reader / all my cables on both PC's
My problem is a software problem
PLEASE HELP!!!!! SOS

I have tried all of those and different versions/order of import, different drives and different cards.
Sorry, cross posting the same time it seems.
I just put the image back on the memory card and checked it in the camera and it views normally in the camera.
Again, you are not viewing the Raw file at the back of the camera, it can't show because the Raw data needs to be first demosaiced using a dedicated Raw converter like ACR or Canon DPP. What you see is the embedded jpeg preview the camera produces for this purpose and for using in Finder and other systems that can only view jpeg.
I did try downloading it to a different hard drive directly from the camera...I was able to view the image for about 30 seconds before it corrupted. As I mentioned, for this particular image I actually did a full ACR edit and created a jpg from the RAW file yesterday.
Here we are getting to the strange part of the problem. Can you provide a screenshot of the problem file?
When this happened about 6 months ago, after re-creating a file in the adobe library (unfortunately I can't remember where it was or what the file name was)...it stopped.
That probably would mean the Cache file and plug in from the User library / caches/ Adobe/ Bridge CSxx / Cache and plug in
or from same user library / preferences / Bridgexx plist file. Both files are recreated fresh and empty after restarting Bridge
I was actually able to go back to the corrupted images (4 out of 6) and view the corrupted images and edit them normally!
Try to reset the default setting in ACR
It just started again recently and I have 5 or 6 images that it's happened to. The first 5 corrupted as soon as I loaded them in ACR, this is the first one that corrupted after I edited it. I've tried opening them in iphoto and Canon DPP and they initially preview normally and then corrupt once they fully load the jpg preview.
Can you show both results from ACR and DPP in a screenshot?

After updating Bridge & PS, still unable to view CR2 files from Canon M3

I cannot view CR2 Raw files from the Mark III on Bridge CS6 and Photoshop CS6 to convert into TIF and JPG files for a client. I have updated all of my Adobe programs, restarted, and the files are still not showing up for me. Help please!

Thank you for elaborating.
Your system should absolutely be opening those files. Any of the versions of ACR (Adobe Camera Raw Plug-in) that run with Photoshop 13.0.6 can and will open those files if properly installed, that includes the current version, ACR 8.6.
Go to About Plug-In > Camera Raw… in the Photoshop menu and see what version shows up there, just to check that the plug-in is installed correctly. There should only be one version of ACR in the plug-in menu.
That Canon camera model has been supported ever since ACR versions 6.7 in CS5 and 7.1 in CS6.
If ACR only shows once in the plug-in menu and you still cannot open your file(s), then you in all probability have corrupted files.
The fact that you can see the images in Apple's Preview means nothing, only that Preview is showing you the embedded JPEG preview embedded in the file. Such JPEG previews generally do not get corrupted even if the raw file has been corrupted.
I hope you have the original CR2 files or good backups.

Can't put CR2 files from Canon Rebel T5i on PSE 11? How do I get them to load?

I keep trying to put my CR2 files on photoshop elements 11 and I can't. It keeps saying my camera is not compatilble. I use a Canon Rebel T5i. How do I get it load? Do I need to update my program? I really need to get this images up and editted asap! Help, please!

You should be able to open the Canon Rebel T5i/700d camera raw files with pse 11 if you update to camera raw 7.4
In the pse 11 editor go to Help>Updates and hopefully that should download and install camera 7.4
list of newly supported cameras in camera raw 7.4
http://blogs.adobe.com/lightroomjournal/2013/04/camera-raw-7-4-and-dng-converter-7-4-now-a vailable.html

DNG won't convert CR2 files from Canon 30D

Similar Messages

Maybe you are looking for