DNIS capture and playback

I'm new to UCCX but hoping someone has some advice on this.
I have a UCCX 8.5 installation and a Communications Manager 8.5 installation at a large university. We have 30,000 numbers in our dial plan but not all the numbers are assigned to devices. In other words some of the numbers are simply not in service.
I would like to play a message to callers when they attempt to call on of these not in service numbers that includes the number they have dialed.
For example:
Caller calls a number that is not in service
Call is redirected to UCCX script
Script plays prompt, something like "The number you have dialed..."
Script captures orginal dialed number (DNIS).
Script plays back DNIS to caller.
Script plays prompt, something like "...is not a working number. Please consult your directory and dial again."
I think the Get Call Contact Info block will capture and store the DNIS I just can't figure how to play the number back. There is a good chance that I'm way off the mark too.
Any help would be appreciated.

Add a play prompt under the get contact info and in the play prompt "prompt tab" put S[] inside the brackets type the name of your string variable that collects the dialed number from the get contact step.
You can combine the beginning and end prompts with the dnis collected info and it should look like this in the play prompt "prompt tab"
P[beginning prompt] + S[dialedNumber] + P[endprompt]
Hope this helps and didn't confuse you.
Regards,
Yosh

Similar Messages

Is it possible to do the audio capture and playback simultaneously?

In short :
Is it possible to do the audio capture and playback simultaneously? . If it is not supported directly by Sun, pl suggest another way to achieve the same.
In detail:
I am doing a voice chat application by using the streaming through UDP . I am able to play the byte stream. But , is it possible to capture sound simultaneously (while playing the audio) to send to the other end?
Edited by: dhillarun on Jan 4, 2008 7:11 AM

If you're Airplaying from you computer, you might be able to do this. Here's what I would try:
Go to the Airplay icon in iTunes. You should see both your Apple TV and your speakers listed as options. Select "Multiple speakers." You'll see both devices together. Turn the volume all the way down on the Apple TV. You should be getting the video on the TV, but only hear audio through the speakers.
Using the "Multiple Speakers" option will sync the output of your devices so that the sound matches the picture.
I haven't tried this myself, but I'm thinking this would work. However, this approach will only work when using Airplay from your computer – not from am iPad or iPhone – as they don’t have the "Multiple Speakers" option (as far as I know). It also won't work with content streamed directly to your ATV, obviously, because there's no way to stream from ATV to other devices.
Let me know if this works.

CS4 HDV Capture and playback issues

Hey,
I am having trouble with HDV capture and playback on Prem Pro CS4. I tried all the steps mentioned on the article posted by Adobe, http://kb2.adobe.com/cps/405/kb405478.html
None of these steps have helped anything. I used the cleanup utility, re-installed everything and started from fresh and nothing happens. Capture is always out of sync, it ignores in and out points when batch capturing and playback is all jerky regardless of quality settings. The weird thing is, this only started happening out of the blue. I was using it on a project and it was fine. I hadn't used Prem Pro in a little while and then all these problems began. No change in hardware.
I am using Premiere Pro CS4 on Windows 7 and capturing HDV footage via firewire on a Sony Z7.
Any help would be much appreciated.
Thanks!

With Win7, if you have not already done so...
Legacy Driver and Capture http://forums.adobe.com/thread/694890?tstart=0
- And a Picture http://forums.adobe.com/thread/727755?tstart=0

CS3 - Video freezes on Capture and Playback - Please Help!

Hello all,
Here's the problem:
When Capturing footage via firewire from Mini DV, shot in standard DV, within a standard NTSC-DV Widescreen 48k Project, the picture freezes after 1 second. The audio can still be heard and the footage actually does get captured. However, after the footage has been conformed, and we load the clip into the Source Window and hit play, the video again freezes after 1 second of play. Again, the audio keeps playing and you can move the marker anywhere on the clip and see that all the footage is indeed there, but as soon as you go to play it from any point - same thing, the picture freezes after 1 second of play, making editing impossible. The clip is being captured as an .avi and all capture settings appear to be correct.
Here's the kicker:
- HDV video captures and plays back fine.
- The DV video captured correctly at first, this has been a recent problem going on now for several weeks, after no changes to the system.
- The biggest kicker - after trying successfully to capture, playback and edit HDV video, we closed Premiere, reopened, tried to play the previously captured DV footage and it played just fine suddenly!!! Then we closed the program, re-opened and tried again - back to the freezing problem and it never played back fine again...
Here's the specs (I can give more specifics later if needed, it's my partner's computer):
Sony PD-150 DV-Cam (but recording on Mini DV in standard DV mode, not DV-Cam)
Windows 7
Intel Core i7 3.20 ghz
Asus X58 Motherboard with onboard Audio and Firewire
6 GB Ram
Nvidia Geforce 9 Series with PhysX
Please help if you have any idea how to solve a crazy problem like this. Thank you!!!
Greg

Now that everything is working, make a full drive image to an external USB hard drive
I use http://www.terabyteunlimited.com/image-for-linux.htm

Simultaneous capture and playback - is this possible?

Hello all,
I'm looking for a way to simultaneously capture NTSC footage into Final Cut and have that captured file available for playback within another program while it is still recording. Kind of like time-shifting with a Tivo. Does anyone know how to do this? Are there certain software/hardware combinations that would allow something like this?
Thanks for your time,
Mark

Yeah, but it is a complex setup and not cheap.
PICTURE READY.
http://www.virtualvtr.com/pictureready/pickeyaaresofuse.html
Shane

Capturing and Playback

Im trying something and i hope you can help me. I have two Mac computers, one dedicated to capturing a event and the other I have is dedicated to playback. They share the hard drive via a network. What I want to know is- is there a way for the dedicated playback machine to access a video file that is still being captured by the capturing machine and play back parts of it in a sequence??

Hi -
Check out Picture Ready.
http://www.virtualvtr.com/pictureready/index.html
I believe it will allow FCP to do what you want.
No personal experience, but I have heard it highly spoken of and in use in mission critical applications like live broadcast TV.
MtD

Capture and playback

Trying to capture minidv to fcp using jvc gr 850. Everything looks fine in log and capture window while capturing. , but when playing back captured clip , it plays very fast. What gives? Tried a lot already.

If the footage was shot 24pa (advanced), you can remove the pulldown during capture, but if it was shot standard 24p, you can't do that, and must capture at 29.97. That could be causing your problem... has to be 24pa to capture at 24fps. otherwise, just capture at 29.97 because FCP can't remove the pulldown until after it's captured.
There's little reason to remove the pulldown BTW...it will look the same, and if you are intending to print to film, then you do want to remove the pulldown, or if your program is going to be long, removiing the pulldown will fit more video on a DVD... but otherwise, it will end up looking the same in any event.
Jerry

Clitching during capture and playback

hi there, I have been having some major problems with FCP and my computer...I don't know if they are related.
My HD died on me, so I put in a brand new one...since then, my fcp has been acting goofy.
When I try to capture video and audio (in firewire NTSC Basic mode), the video stops, but the audio keeps going. When I place the clip in the timeline, the audio doesn't follow the video. I did notice though that even with just my capture window open and video is playing from my deck, it will stutter withough even hitting the capture now button.
However, I can capture video on the "non-controlable device" mode, but it has some glithces (pixleated colors that appear in the video), but the audio doesn't get off.
Is this a back firewire port on my computer? I did try a different f.w. cable and it still did it...anyone have a suggestion? Thanks!
-R

Once past the immediate AH HA!, I recognize THAT problem (which doesn't seem to be happening), more basic information becomes necessary to track down the problem.
Video format? DV, HDV, Uncompressed HD of some flavor?
How captured? iMovie? FCP?
External drive type and free space? Firewire, USB, e-sata?
Any filters on the footage?
Sequence settings?
How are you viewing the footage? computer screen only, external ntsc/pal monitor?
And so on.
Cheers,
x

Mic audio capture and playback

I've been developing in flash for a while now and now I have
a job developing flash and actionscript 3.0. I have come across a
project with a simple concept but I have found it difficult to
implement.
What I want to do is allow the user to click a button and
record their voice and then I want them to click another button and
play it back. I don't need to save or store it and I don't have
access to a flash media server or any alternative.
Is this possible to do and if so could someone please point
me in the right direction.
Thank you

Here you go. I use this script so I know it works. You need to have at least flash player 10.
You need 3 buttons. 1 record button - linkage = micRec , 1 play button - linkage = soundPlay and one stop recording button - linkage = stopRecord
i keep the stop button off the stage and have it moved onto the stage when the record button is pushed. Then finally move both the record and the stop recording button off the stage when the stop recording button is pushed.
micRec.addEventListener(MouseEvent.CLICK,recordMic);
function recordMic(event:MouseEvent){
micRec.x = -250;
stopRecord.x = 117;
const DELAY_LENGTH:int = 4000;
var mic:Microphone = Microphone.getMicrophone();
mic.setSilenceLevel(0, DELAY_LENGTH);
//mic.gain = 80;
mic.rate = 25;
mic.addEventListener(SampleDataEvent.SAMPLE_DATA, micSampleDataHandler);
stopRecord.addEventListener(MouseEvent.CLICK,SREC);
var soundBytes:ByteArray = new ByteArray();
function micSampleDataHandler(event:SampleDataEvent):void
    while(event.data.bytesAvailable)
        var sample:Number = event.data.readFloat();
        soundBytes.writeFloat(sample);
function SREC(event:MouseEvent):void
stopRecord.x = -250;
    mic.removeEventListener(SampleDataEvent.SAMPLE_DATA, micSampleDataHandler);
    soundBytes.position = 0;
    var sound:Sound = new Sound();
    sound.addEventListener(SampleDataEvent.SAMPLE_DATA, playbackSampleHandler);
soundPlay.addEventListener(MouseEvent.CLICK,SP1);
function SP1(event:MouseEvent){
soundBytes.position = 0;
    sound.play();
function playbackSampleHandler(event:SampleDataEvent):void
    for (var i:int = 0; i < 8192 && soundBytes.bytesAvailable > 0; i++)
        var sample:Number = soundBytes.readFloat();
        event.data.writeFloat(sample);
        event.data.writeFloat(sample);

Audio video capture and combination Nintendo64

Hi
I was hoping that someone could help me with mixing a video and audio signal for live playback.
I have a N64 with its video component hooked up to my TV capture card, and the audio connected to the line in on my sound card.
the computer i'm using has a fresh install of arch, with xfce. I currently just have alsa installed, as far a sound stuff goes and everything is working fine.
right now i can see the video from my nintendo with "QT V4L2 test utility" which is all good. I can't make this video full screen or any bigger. I do know i can use cheese to view the video in full screen, but it does not handle any audio.
so, what program can i use? or how can i play captured audio live?? is there a program (something like cheese or not) that can handle the capture and playback of both audio and video????? the latter is prefered
any input would be good, some ideas could help me along
thanks guys

ok cool VLC seems like a good option, i can capture the video just fine becasue i know the video device name is /dev/video0 but i don't know what the audio device name is..
i have been looking online for a way to find this out. but i have not yet found a way to tell me what the audio device name is for my sound card. (i have the audio input connected to a PCI sound card)
i just found this which helped a bit
http://forum.videolan.org/viewtopic.php?f=32&t=81166
it turns out that when i have a look the sound card i want to use is alsa://plughw:0,0
so i go -> show more options -> play another media synchrously and enter alsa://plughw:0,0. all goes well
Last edited by marno11 (2011-08-18 10:18:26)

Capturing and logging sound

Need some help here!
I have a sony handycam wide lcd DCR-HC90E PAL with a surround microphone ECM-HQP1. When I capture and log I see that the sound is captured in stereo where it should be in 5.1.
May be I do something wrong, but In the user preference and in the audio and video settings I can not find any specific button to set different from what i did.
Who has a solution.
Thanks
Mac Pro + 2 23 inch screens Mac OS X (10.4.9) FCS2, 3 GB int. 1,5TBmemory, Bose companion 5, Sony DCR-HC90E-Widecam

I am working with FCP Studio2
Do you have any suggestion on what setting I could use. Within the settings I found there are no 32 hz 12 bit settings to choose.
My settings now are;
sequense preset; DV pal 48kHz - 23,98
Capture setting; DV Pal 48 kHz
Device control preset; Fire Wire PAL
Video Playback; Apple FireWire PAL (720 x 576)
Audio Playback; Bose USB Audio
Thanks if you could give me a solution.
Jan Mulder

HD - best capture and edit for NTSC Sd output?

I shoot in HD but need to output for community TV channel in Standard NTSC. What shoud my capture and sequence settings be for optimum picture quality for playback?

Two suggestions.
When I did shows on the local community tv, they had pretty rigid specs I needed to conform to. So check with whomever you are producing for, the station will give you what they need.
For my local community tv, it was 29.97 frame rate bitrate 6000-8000 720x480 mpeg2. Audio was 2 ch stereo bit rate of either 192 or 256, 44.1 or 48 khz.
So I would export in prores and use something like Compressor to change.
Hugh

Capturing and saving Captivate as AVI

I have a pdf file. I will use Captivate to capture and will
need to save it as an 800 x 600 AVI file.
Can you capture within Captivate and save it as an AVI? If so
- how might this be done?

You can save this as an AVI file in Captivate 4. See Adobe documentation here:
http://help.adobe.com/en_US/Captivate/4.0/Using/WS5b3ccc516d4fbf351e63e3d119e958285f-7fff. html
Publish the project as an AVI file
You can publish your Adobe Captivate project as an AVI file. Open the published AVI file in any of the media players that support the AVI format.
You can use any of the encoders available on your operating system for publishing. Alternatively, you can use a third party software that you have installed on your computer.
Note: All interactivity in your project is lost when you convert the project to an AVI file.
1. Select File > Publish.
2. In the Publish dialog box, select Media, and configure the following options:
Select Type
From the menu, select Video (*.avi)
Project Title
Enter a name for the AVI file without adding the extension (.avi).
Folder
Enter the full path to the folder in which to save the file, or click Browse to locate the folder.
3. Select from the following output options:
Video Format
The list of encoders available on your system is available here. Select an encoder for publishing the project in the AVI format.
Audio Format
Adobe Captivate uses pulse code modulation (PCM) for audio files. Simply put, PCM converts analog files to binary (digital) files.
The Project Information area displays useful statistics about the project including the size (resolution), number of slides, audio information, e-learning details, accessibility compliance, and playback control assigned to the project. To change any of the options listed in this area, click the blue text. To change preferences, click the Preferences button.

What for a live event capture and edition ?

Hi there,
What software is best for a live event capture and edition ? (for an instant public feedback) a one with the ability to be controlled by a 2-octave midi keyboard.
Can FCP do that ? even partly ?
The idea is to be able to do the same then tv shows (live cuts and effect layers)
thanks,
Ionel

FCP is a professional non-linear editing application ... not a live event playback device.
If you need a very fast turnaround editing facility you can look at FCP coupled with something like Picture Ready from Gallery, you can download a demo to test
if you're looking at doing a 2 camera live cut/switch then you can consider a dual decklink I/O solution and On-Air 2.0

Record and Playback performance goes down at high frequency

Hi,
We're testing record and playback using USRP-2920( LV 2013sp1, NI-USRP 14)
To test it, we downloaded record and playback example code.
Signal source is a function generator outputting 6 MHz bandwidth 8 VSB modulation signal.
USRP Rx parameters are center = variant / gain = 0 / IQ rate = 25MHz and Tx parameters are center = same as Rx center / gain = 0 / IQ rate = 25MHz
The problem is... in low carrier frequency like 70MHz, quality of playback signal is great.
But in high carrier freqency like 2.2GHz, SNR and signal power dropped significantly i.e. they tend to drop as carrier frequency goes high.
And the strange thing is as carrier frequency is increased, a small peak on the center is increased as well.
Please check the attatched file to see the tendancy.
So.. my question is why is this tendancy occures?(we tested another USRP and the result was same as before)
and what should we do to reduce this effect?
Regards,
Youngmin
Attachments:
record and playback results.xls ‏469 KB

Hi,
I suggest a couple of things:
NI USRP 2920 is a non-calibrated device. So setting a gain value of 0 at different frequencies could mean a different actual gain. So try increasing the Rx recording gain (on the USRP) in cases where you observe low SNR. Similarly Tx is not calibrated.
Is the signal recording done with cables or over wireless medium ? You can try to eliminate any spurious signals if you use SMA cables while recording.
I think the power at the center of the spectrum is the DC offset. You may refer to the DC Offset/LO leakage section in the best practices section here http://www.ni.com/white-paper/13881/en/
Thanks.

DNIS capture and playback

Similar Messages

Maybe you are looking for