DNL_CUST_BASIS3 still running
Hello
I started the UOM replication with DNL_CUST_BASIS3 but since 2 hours it still running.
I R3AM1 i cant see that block is at 11 but I don't understand it doesn't stop yet....
can you help me please?
Also refer to the following thread on unit of measure error :
Re: Unit of Measure error
Kind regards,
Yann
Similar Messages
-
Material Replication still running
Hello,
I checked SMQ1 and SMQ2 in SRM and in my backend and those table are empty.
I set a filter and launch my material replication, but it still running for long long time. it is not normal and i don't know why...can you help me?Hi
Which SRM and R/3 versions are you using ?
<b>Please go through these links, which deal with the same scenario -></b>
Material not downloaded from R/3
Material Replication from R/3 to SRM - Object status stuck in Running mode
DNL_CUST_BASIS3 still running
Re: Inbound Queue not visible in SMQ2, after starting Material replication
SRM Middleware Replication - Initial Download Failure
materail gruops replication
Problems using R3AR4
Downloading material from R/3
set filter in R3AC1 for material master
Replication product and service masters
Re: Deleting some replicated materials from SRM
Replication problem in 5.0
Hope this will help.
Regards
- Atul -
im trying to uninstal firefox so i went to my control pannel clicked on add or remove progams then clicked on mozzola firefox and clicked remove it said it was still running so i clicked ctrl alt dlt and clicked task manager and ended firefox from running and when i did that the box to uninstall firefox exited so i clicked it again and the program started running again i dont know what to do i need firefox uninstalled
I assume you are using windows. There are two options:
1. Try restarting your computer and then try uninstalling.
2. Firefox might be a program that starts immediately upon booting. In that case, go to the task manager, end all tasks that firefox is running. Then try uninstalling firefox -
I don't know what other details I can give you. I am not very computer wise. Just an every day web browser and emailer. This is a catch 22 problem. For example when I am installing a program; adobe flash player for example, it tells me to close firefox to continue and when I do I get the firefox is still running message even though there is no window. And so the installation isn't completed. I like firefox but this is a bit of a dealbreaker. hope you can help.
* Try this.
* Type in the address bar about:config.
* Accept the warning.
* In the page that appears, in the Filter box, type network.http.max-connections.
* Change the value to 32 (which is probably set to 256 in your case).
* Close the about:config page.
* Restart the browser. -
I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows programs I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit or just install 32 bit? (Going with Win7 as I hate Win8). And I will install Office Pro 2013 64 bit too or 32 bit or is that automatically selected by the underlying OS (I use Word, Excel and Access mainly for a membership database of a local club) ? I am not a power user so would appreciate advice on way to go
Again thank you. If I only use word, excel and access in the Win environment and Mac OS for email and safari for internet do I need anti virus software . Ie my connection to the world is mac only and I use office pro only to ruin the club, newsletters, membership database etc. and of course anything I do there can drag/drop to the mac environ to email. That's my understanding anyway. Next will my existing .pst file copy directly into mac mail or do I have to runs translator as I recall reading something about that ages ago when I started thinking Mac
-
Open browser then close no browser is open and then click to re-open the browser it says it is still running and cannot get another browser for about a 45 sec....have Windows XP and didn't have the issue on 3.6 version.
https://support.mozilla.com/en-US/kb/Firefox%20hangs <br />See '''hang-at-exit'''
-
Im still running 10.6.8 on an old MacBook 2.4 Intel Core 2 Duo. Questions about 10.7
Im still running 10.6.8 on an old MacBook 2.4 Intel Core 2 Duo. "Genius" said I couldn't upgrade to enough memory to use 10.7. Doing ok so far except my bank/credit cards no longer support Quicken. If I switch to 10.7.x, what will I LOSE? I don't do change well, and really hate surprises. I understand scrolling goes the opposite way, that Search works differently, and that I'll have to update some of my software, for example, and then THAT software will be different. For example, does anyone know if upgraded 10.7.x is as fully functioning in Quicken 2013 as old OS and old Quicken, for example? Will it communicate with my banks?? That, and general frustration with tired-computer issues would make the switch more appealing.
Thank you all very much.katetx2001 wrote:
Thanks. Why would I "insist" on Lion?
You mentioned Lion in your post so I assume that you may have reasons for using it in lieu of Mt. Lion. I actually do so for technical reasons regarding my Internet service which will not run on Mt. Lion. If you do not have such a constraint, then Mt. Lion is an acceptable choice.
Ciao.
You may start an new post regarding the rest of your issues. -
i'm on MAC OS X 10.5.8. Still runs great but now i have no itunes as i've followed this post that covers my first issue. i've followed it correctly to the part of re install the latest version of itunes and i cant.
i've been running logic pro on this mac and i have no issues so i've not upgraded software etc.
i need a way around this problem without having to upgrade the OS if there is one.
does anyone please have a suggestion that doesn't involve spending hundreds of pounds?
i was only trying to get an iphone connected and this article says 10.6.8 or earlier?? it is definately earlier
macbook - MAC OS X v 10.5.8...... trying to connect an iphone 4s os 6
problem now..........need to re install itunes but can't probably due to my current OS.
please help. i'm pretty gutted about this. i should of researched a little further me thinks. cheers guyssaid article below....
HT1747: iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X 10.6.8 or Earlier
Learn about iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X 10.6.8 or Earlier -
How to tell embedded jinitator applet is still running when window closed
Hello, we are trying to accomplish the same thing that is mentioned in this post from Metalink. I've searched for a solution and hope someone here can help. Instead of restating the issue I think David Wilson does a good job of explaining what is needed. Can anyone please suggest a possible solution?
From: David Wilton 07-Oct-05 01:08
Subject: How to tell embedded jinitator applet is still running when window closed
How to tell embedded jinitator applet is still running when window closed
Hi,
We run an oracle 10g forms application through 9iAS over an intranet. All users are running windows 2000 professional.
We run separate frame = true but I would like to switch to separate frame = false
With separate frame = true if the user clicks the outer windows "X" close button (forms mdi window) the user is prompted to save changes before the application ends.
BUT
when using separate frame = false
If the user clicks the upper window "X" button (no longer form mdi window but regular browser window) the window and application is abruptly closed.
I'm interested in using a onbeforeunload function to confirm if the user wants to close the window. This would be placed in the basejini.htm file. This could always ask if the user wants to exit or not. If they click OK then the window closes but if they click "Cancel" you are returned to the forms application exactly where you left. something like event.returnvalue="do you really want to exit?";
However if the user exited using the normal exit form method then the applet is already closed before the onbeforeunoad event fires and there is nothing to go back to and I want the window to close automatically. This is accomplished using close.html file in post forms trigger.
So what I want and what I think many may also want is the check if the embedded applet is still running and if so prompt the user to return to the application or continue to close. Of course If the applet is no longer running then just close because there is no reason confirm closing anymore.
Does anyone have a html/JavaScript solution that can be placed in the jinitiator.htm file? or similar?
Thank you
David
[email protected]
From: Andrew Lenton 07-Oct-05 08:58
Subject: Re : How to tell embedded jinitator applet is still running when window closed
I don't know if this is exactly what you are after but you can add the following to the top of your basejini.htm file and it should prompt the user before exiting the IE window.
<BODY %HTMLbodyAttrs%>
%HTMLbeforeForm%
<SCRIPT>
<!--
window.onbeforeunload = unloadApplet;
function unloadApplet(){
message = "Warning! Please exit the Java Applet prior to
exiting the browser"
return message;
//-->
</SCRIPT>
From: Oracle, mohammed pasha 07-Oct-05 09:55
Subject: Re : How to tell embedded jinitator applet is still running when window closed
David,
Well I could not understand your complete requirement.
Refer to Note.201481.1 How to Close the Browser Window When Closing Forms And How to Simulate SeparateFrame By Javascript
Note.115905.1 How to Close Browser Window When Closing Webforms Applet
Kind Regards,
Anwar
From: David Wilton 07-Oct-05 14:37
Subject: Re : How to tell embedded jinitator applet is still running when window closed
Thank you for your reply and yes you did not understand my question fully.
Sorry if this is a long reply
I am able to close the browser window using information in notes 115905.1 and 201481.1, this is not the issue. We implemented this several years ago. It is workable for both separate frame = true or false.
It is most important to not allow the user to end their forms application by closing the windows browser, they must close using normal form exit commands.
What I want is to have separate frame = false, the big drawback to this option is the user can exit the application and bypass all forms code by pressing the windows "X" close button. This is why we need the code as just provided by Andrew Lenton above in this thread.
BUT Andrew's code will always prompt the user before closing the window and I do not want that. I want the user to be prompted only under scenario 2 listed below.
Here's the 2 case scenario for exiting the application.
1. If the user closes properly and uses exit form which fires all normal form triggers including post_form with it's call to close.html file.
All uncommitted changes are saved or rollback and the users session is ended normally both on the database and in the application server.
All browser windows will close, great all is good. And without Andrew's code the window will close but with Andrew's code the user will be prompted to close or not, if they select Cancel the window will remain but the applet has already ended so why prompt? ...This is what I want to avoid.
2. In the forms app. if the user clicks the windows "X" close button with uncommitted changes. The browser just closes the changes are rollback without prompting the user to save. The users sessions are now lost and still running in the database and application server until they are timed out.
If I use Andrew's code then the user will be prompted to continue to close or go back, if they click Cancel to go back then focus returns to the forms application and the user can continue to work. If the user clicks OK then the window closes and unfortunately their sessions are still lost until timed out.
So what I desire is to add to Andrew's code to check if the embedded applet is still running and prompt the user to close or not accordingly.
Something like:
Basejini.htm like
</HEAD>
<SCRIPT LANGUAGE="JavaScript">
function maximizeWindow()
window.moveTo(0,0);
window.resizeTo(screen.availWidth,screen.availHeight);
function confirm(){
If(document.embeddedapplet.closed())
Win.opener = self;
win.close();
Else if
event.returnValue = "Closing Forms Application. OK to continue?";
</SCRIPT>
<BODY %HTMLbodyAttrs%, onload="maximizeWindow()", onbeforeunload="confirm()">
%HTMLbeforeForm%
I hope this explains my requirements.
David
From: Oracle, Evelene Raechel 10-Oct-05 06:45
Subject: Re : How to tell embedded jinitator applet is still running when window closed
Hi,
Note.199928.1 How to Alert User on Closing Client's Browser Window in Webforms
Regards,
Rachel
From: David Wilton 11-Oct-05 17:40
Subject: Re : How to tell embedded jinitator applet is still running when window closed
I'm sorry this is not helpful at all.
Note 199928.1 is only an alert which does not stop the closing of the window and still displays as an alert if the user does close properly using exit form ... so why would you want to display the alert then?
This is exaclty what I do not want and why I want to determine if the applet is still running before displaying any kind of message.
David
From: Oracle, Evelene Raechel 17-Oct-05 12:23
Subject: Re : How to tell embedded jinitator applet is still running when window closed
Closing thread.
Thanks,Hello,
I had the same issue last year - wanting to provide a warning on closing the browser, but only if the Forms session is still running. The approach I took is described below, see also the thread where I originally posted this at Closing brower window
Hi there,I've had a similar requirement - or rather, the two conflicting requirements: to warn when the browser is being closed, but for the app to be able to close the browser without a warning being fired.
To always provide a warning when someone (the user or the Forms app) tries to go to a different page (e.g. your close.htm), use Javascript like:
function confirmExit(){
if(appletRunning==true) {
msg="Closing this window or navigating to another page will end your SomeGreatApp session.";
window.event.returnValue=msg;
And make a call to confirmExit() in the onBeforeUnload event of your main page.
You'll notice I first check an 'appletRunning' variable before displaying the warning. This Javascript variable is set to true by my app when it starts up, using an embedded Javabean that calls out to Javascript. Once that variable is set to true, then the warning will be displayed if the user tries to shut the browser by clicking on the 'x' button, or to go to a different URL.
When my app is shutting down, it uses the same Javabean to set appletRunning back to false. It then navigates to a close.htm - which will be done without a warning being displayed.
See Re: How can a Javabean call Javascript function of the basejpi.html?? for example code on how to call Javascript from a bean embedded in your Forms app.
Hope these ideas help you out, it's worked for me (so far, anyway!!)
James -
Even though Firefox has been updated multiple times (currently using Ver. 3.6.13) since I started using Windows 7, I am still unable to totally close it from the toolbar or taskbar. Firefox does closeout on the screen but apparently continues to run in the background. If I open Firefox at a later time, I get an error message stating that Firefox is still running. I then have to go Task Manager to "End Process." Electing to do so allows me to restart Firefox. I never had this problem with Firefox when using Windows XP and I never have this problem with any other software under Windows 7.
https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit
-
I close all Firefox windows. When I try to open another window later I get a message telling me that Firefox is still running and that I need to close all windows or restart my computer. I have this about 3 times a day this past week but prior to that it was maybe every one or 2 weeks. I had the 3.5.10 Version of Firefox, but have just updated to see if this stops this from happening. But what do I do if it doesn't stop it?
There are a few possible causes for that error, for details see [[Firefox is already running but is not responding]]
-
Every time I close Firefox and try to restart it my computer leaves a message that I still have Firefox running and that it is unresponsive and needs to be closed. The problem is that there isn't a still-running Firefox to be found, consequently it is impossible to close and therefore impossible to open. I have used every form of Firefox and this is the first time this has happened. Please, please don't force me to use Chrome or iExplorer!!
Start Firefox in Safe Mode (above). Wait a few minutes, then close Firefox.
Is there still a problem?
If you are still having issues;
Type '''about:support''' in the address bar and press '''Enter.'''
Under the main banner, press the button; '''Copy Text To Clipboard.'''.
Then in the reply box at the bottom of this page,
do a right click in the box and select '''Paste.'''
This will show us your system details.
'''No Personal Information Is Collected.'''
Start your '''Computer''' in safe mode with networking. Then start Firefox.
'''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode;<br>Free Online Encyclopedia]''' -
I have a Gen 4 Ipod Touch, it is still running with IOS 4. When i go to my settings and select <General> there is no <Software Update> button to choose from. How do i update my Ipod to the new IOS system?
You have to hook it up to a computer and update it to ios 5 and then there will be a "software update" button.
-
After downloading Firefox 4 Beta, my personal website does not display as it used to. The text is now aligned left when it was centered. Also, when I try to log in to You Tube, everything freezes. I have to use the computer task manager to close the browser. When I try to open Firefox again, I get a message stating it is still running and I must close it or re-start my computer to open Firefox again.
I would like to return to the previous version of Firefox.You can get duplicate installation disks from Apple Customer Service. You will have to provide them with the MBP serial number and there is a charge,
Another option is to purchase the Snow Leopard retail disk from the Apple online store:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Either option should allow you to install an OSX.
Ciao. -
Okay, well I have just bought a AirPort Express Base Station ( 2nd Generation ) and I'm new to it, but I wanted to ask that if it join's a network you have setup at home, will it still run with the 2.4 GHz and the 5.0 GHz.
The AirPort Express will "extend" both the 2.4 GHz and 5 GHz networks and provide more wireless signal coverage when it is connected to another Apple AirPort router and configured correctly.
The AirPort Express cannot provide more wireless coverage though, if you are trying to connect it to another 3rd party wireless router using wireless only.
It should be possible to set up the Express to provide more signal coverage if you connect it back to the main router using a wired Ethernet connection or using Ethernet powerline adapters.
Maybe you are looking for
-
How do I print front and back with two pages per sheet? (OSX Lion)
I can't find a simple solution to my situation... I'm using Max OSX Lion 10.7.3 and Adobe Reader X 10.1.2. I want print two PDF pages onto one printed sheet, and I want to print front and back. When I go to the print settings and select two pages p
-
i started to update my iphone 4, and in the middle of the update, an icon popped up saying that "iTunes has detected an iPhone in recovery mode. you must restore this iPhone before it can be sued with iTunes." I really cannot lose the data on my phon
-
Tables for vendor evaluation data
Hai, I want to know the tables in which vendor evaluation data is being stored, and I need to get vendor evaluation data through my RFC, can u suggest me the procedure how I need to do it. Thank you
-
Clicking sound on optical drive
I tried burning cd or dvd on my macbook, and i keep hearing a clicking sound ,and gives me an error, so it ejects the cd or dvd, so that means my optical drive needs to be replaced?
-
Black blocks in my Camera Roll
Hi, I have an iPhone 3G running 4.0.1. Since getting this update I have a big black block in my camera roll, covering some images, 5 to be exact. It's hard to explain, it's just a black block covering most of the 5 images, like a glitch looking thing