DNS addresses (master and slave) + personalizing the url address

Hello.
My name is Fernando and I published my site using MobileMe (www.fernandoingles.com).
It’s working already really well.
But since I’m from Brazil, I built one in Portuguese as well.
And since the common site endings here are .br I’m trying to purchase the www.fernandoingles.com.br as well but in order to be able to actually buy the site I have to give them two DNS addresses of the place I’m publishing the website with.
(one ‘Master’ and one ‘Slave’).
How can I get those addresses?
And another thing is that I also have my bands site’s published under my main domain name (fernandoingles.com) with my main MobileMe account (but I have the family pack now).
[www.pipeusa.net and www.pipebrasil.com]
I purchased those Urls using GoDaddy and they are all properly forwarded already, which means that when the person types those addresses above it already goes to the correct site.
But what shows on the actual url above is (http://www.fernandoingles.com/fernandoingles.com/Pipe.html).
And what I would like to appear is only the addresses (www.pipeusa.net and www.pipebrasil.com) instead of my name before them.
I bought the family pack so that I would have more space and etc... and already put those addresses ((www.pipeusa.net and www.pipebrasil.com and fernandoingles.com.br) as their main domain.
But since I’m publishing them all using my own iWeb how could I make those extra sites work as their own main sites?
Would it work if I log in with the desired MobileMe sub-account (let’s say www.pipeusa.net) and then go to iWeb, move that site to the top and them publish it?

Thank you so much for the response!
Great option on the added accounts!!
Since I manage all those sites myself could I manage them all within the same 'log in' or each and every time I need to make a change on one of those sites I must 'log out' of whatever account I'm in and then 'log in' into the account that the change needs to be made?
And whenever I 'log in' into those accounts (the ones that have the respective domains) should I replace on iWeb before I publish the top site with the one I want to as the main domain or can I just not do anything at all?
And about the DNS address issue,
Since I’m from Brazil, I always build two sites, one in Portuguese and one in English.
And since the common site endings here in Brazil are '.br' I’m trying to purchase the '.br' option of all the addresses I have as well but in order to be able to actually buy the site I have to give them two DNS addresses of the place I’m publishing the website with.
(one ‘Master’ and one ‘Slave’).
How can I get those addresses?"
Thank you so much for the help!!!!

Similar Messages

How can I hide the user name and password from the url address?

Good afternoon every body,
I have a form running with Oracle9i Developer Suite Release 2 and when I run the form on the web it shows the user name and password of my data base. Can anyone of you please help me to hide the user name and password, if there's any way of course?.
Thanks a lot!!.

Luis,
Then, as inolau's notice, create logon screen (or use the default one) and force the users to logon at runtime. Do not pass username/password as parameters.
inolau,
True that if the connection is specified in the config it will be the same for everyone. However, every case is different. For example one of our apps gets S3 credentials (from non-Oracle S3) as session parameters. It uses this common db connection to validate some stuff with the database, read security definitions and then it re-connects the forms using the credentials.

Merge Address Book creates 4 of the same addresses on a Post Card in Pages

I'm a little miffed right now because I just spend 20 minutes on the phone with apple support who told what I needed to do but couldn't tell me 'how' to do it.
I'm trying to print multiple postcards (pages default if 4 postcards/page), all I want to do is merge my address book onto these postcards with EACH SEPARATE POSTCARD having different address...that means on a page with 4 postcards, I have 4 different addresses. What currently is happening is that I'm merging about 200 addresses from my address book, and it creates the same address 4 times(on one page, all four postcards), then creates another page for the next address (4 more postcards on that page). This leads to 4x's the amount of postcards I need to actually print.
Support told me that I need to change the setting from 4 post cards per page to 1 post card per page...but couldn't tell me how to do that. They suggested I look in 'help' for an answer....which I always do before calling support anyway. Any help would be nice here. I thought my apple protection service/support plan would help in instances like these...and YES, this answer came from an 'applications specialist'.

Cgip wrote:
Here's my question then, if the default in the postcard template is 4 post cards/page, how do I change it to one? This really seems like it'd be an easy fix, but I may be wrong.
I wrote:
The merge tool merges one record in one document. If the document is a "one_page" one, this means one record per page even if the document uses only 1/4 of the sheet.
We are writing upon a MERGE tool, not upon a LABELIZER one !
The only soluce would be to use a custom paper size whose height and width will be half the standard one.
Doing that you will be able to print one card on one small page.
If you try to put a single card on a page you will leave 3/4 of the sheet white.
You may also build four templates,
one with the card top-left
one with the card top-right
one with the card bottom-left
one with the card bottom-right
So you will be able to print
1/4 of cards with template 1
1/4 of cards with template 2
1/4 of cards with template 3
1/4 of cards with template 4
As I wrote, "doing (exactly) what you wish can't be done with Pages".
This is what was responded many times.
What you wish has nothing to do with MERGE. It's the job of a LABELIZER tool !
Yvan KOENIG (from FRANCE samedi 3 mai 2008 18:59:03)

When I open a second Firefox browser window, the URL address window, instead of showing the URL, says "Go to a Web Site;" also, and more importantly, the "back" button is greyed out. This is a new problem, and the first Firefox window I open works fine.

After I open the first Firefox browser window, any additional window I open does not open my homepage, but opens a blank page with "New Tab" showing on the tab. An orange "Firefox" tab with a drop down arrow shows at the upper left hand corner of the screen. All of the options (File, Edit, etc.) are greyed out, however they will work if you move your cursor over them.
The URL address window says "Go to a Web Site". After I've gone to a website, the back button remains greyed out and I am not able to go back to a previous page. My RoboForm and Netcraft toolbars only show up in an abbreviate form. The add-on bar doesn't show up at all.
Again, this is a recent problem, and only happens after I've opened one browser window (which works fine) and then open additional browser windows (as few as one additional).

I had this same problem. Seems to be caused by the web developer tool bar FF extension (this started happening after a recent update to that extension). After disabling it, my FF is back to normal :)

Where are contacts in my Personal Addresses file and why do my email addresses differ than the ones I reinstalled in my Personal Address file?

I lost my Personal Address file in Cyber Space and all of my contacts. I reinstalled my contact information into a new Personal Address file and want to make sure I save a copy of the file in case the file gets lost again.
Also, when I created a new email and typed in the first few letters of the address contact, it automatically opened up the persons contact but in a form that is different than what I entered into my personal address book and is not able to be sent. It showed the email address as, <" m*****"@hotmail.com> . There is the symbol " in front of their email name and in front of the @ symbol in the email address, which is not what I installed in my personal address book. I had these kind of emails in the Collected Addresses file which I'm guessing caused my problem to start with. I do not need to have a Collected Address file. Somehow I must have hit the wrong keyboard key and created this problem. I do not want to uninstall and reinstall Thunderbird in fear of loosing all of my contacts again. I spent two days reinstalling my contacts in the Personal Address file and even then information is missing. So now I have to contact everyone and request phone numbers and home addresses and install all of them again.
As a final note, I deleted all of the addresses in the Collected Addresses file. Can you tell me where they may be saved at so I can make sure they are gone and not interfering with my new Address Book and function of my email account?

The Personal Address Book is stored in your local disk drive; "cyber space" doesn't come into it.
Was it just the Address Book that was lost? Did your email account settings remain intact? Or did you lose the entire profile?
All of your data is stored in a set of files known as the profile. It's unusual for just one element of it to go missing. Any query about saving or protecting data will generally be answered by guiding you to backup your entire profile.
https://support.mozilla.org/en-US/kb/profiles-tb
http://kb.mozillazine.org/Files_and_folders_in_the_profile_-_Thunderbird
It's possible to single out address book files for independent backup, but you'll need to surgically dissect them from your profile and know where to insert them in order to restore them.
PAB → abook.mab
CA → history.mab
user defined address books → abook-''n''.mab where ''n'' is a number
A safer option for a partial backup might be to export the relevant address books.
In the Address Book, select an address book, then go to '''Tools|Export''', enter where you want the exported addresses to go. Repeat for each address book you want to preserve.
Thunderbird likes the LDIF file format which exports and imports cleanly. The main alternative, CSV, is good for transporting data to or from other address books, but you'll have to take care to get the imported data to feed into the correct data fields. For instance, many users find that their email addresses are posted into the Nickname field. Have you checked your address books to confirm that all the data are where they should be?
The Collected Addresses book, IMHO is like the lint filter in a tumble dryer. Best way to use it is to keep it empty; periodically examine it, move useful addresses to a proper address book and dispose of the cruft you don't need. If you let it grow, you'll have trouble finding the really useful addresses in amongst all the chaff.
There is an add-on that might recover a deleted address book, but I can't recall which one it is. Hopefully someone else will chip in?
sfhowes? ;-)

Is there a way to prevent Robohelp WebHelp from appending characters to the end of the URL address for a TOC Entry?

I am running RoboHelp 10 on Windows 7 Enterprise SP1 64 bit OS.
WebHelp is appending characters to the end of the TOC entry's URL address. The characters "bc-n" where n is a number are being generated for all of the TOC Page Entries when I generate WebHelp output. We are exporting the HTML files for import into an application. The TOC Page Properties Link to: property does not contain the characters in RoboHelp.
We have standardized names defined for our application and the appended characters are not going to work in the application.
cid:[email protected]
When I use the generated html output in IE10 Version 10.0.9200.16635 Update Versions: 10.0.7 (KB2846071) the characters show up in the URL when I hover the mouse over the TOC entry as shown in the screenshot below.
cid:[email protected]
The two screenshots show that the Link to property does not have the characters "bc-7" but the URL address does.
Is there a setting or way to configure RoboHelp to prevent Robohelp WebHelp from generating and appending characters to the end of the URL address for TOC Entries?

I have never known Rh add any characters so I think something else is at play here. Please open one of the sample projects and see what happens there. Click Open on the RoboHelp Starter page and then click Samples in the ribbon on the left.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Master and Slave concept

hi guys,
i am confused about the master and slave realtionship in ospf. any one can explain it to me in detail.

Hello Pankaj,
The Master and Slave in OSPF are a slightly confusing concept but the idea behind it is quite simple.
When two routers decide to become fully adjacent, they must synchronize their LSDBs. OSPF tries to optimize this: the routers first exchange only the list of entries in their LSDBs. Each router compares the received list to the list of items in its own database, and if it finds that an LSA is missing or is older than one the neighbor knows about, it requests it from the neighbor afterwards. This way, both routers transmit only the missing or updated LSAs, not the entire LSDBs.
The list of LSDB entries is carried in Database Description (DBD) packets. Naturally, when routers exchange DBD packets, they must be sure all of them have been properly received by the neighbor, so some sort of acknowledgements must be used. There is a problem here, however: the only packets in OSPF used to carry acknowledgements are LSAck packets, but they can only be used to acknowledge LSU packets (more precisely, individual LSAs carried in LSU packets), not DBD packets. How shall the acknowledgements of DBD packets be accomplished, then?
OSPF uses a polling style of communication with the DBD packets. DBD packets themselves have sequence numbers used for sequencing and acknowledgement purposes. One of the two routers that are in the synchronization phase will be the one responsible for polling the other (i.e. calling it out it to send another piece of information if it has any), each time with an incremented sequence number. This is the Master role. The other router will only be allowed to respond to a DBD poll, never send any DBD packet without being polled immediately before, and the response DBD packet must carry the sequence number of the Master's DBD poll packet. This is the Slave role. The Slave must respond to each Master's DBD packet even if it has no more LSDB entries to advertise; in that case, the DBD response body will be empty.
So during the DBD exchange, the Master sends DBD packets to Slave, incrementing the sequence number by one in each round. The Slave waits for DBD packets from the Master and only responds to them, and each response carries the sequence number from the last received Master's DBD packet that was used to poll the Slave. Remember: a Slave must not send DBD packets on its own, only as responses to DBD packets received from the Master, and the sequence number of the Slave's response DBD packet must be set to the Master's poll DBD packet.
While I call the DBD packets as "polls" and "responses" here for the sake of clarity, the DBD packets do not have this distinction indicated explicitly. Any DBD packet sent from the Master, either with a body carrying a list of LSAs or an empty body, is a poll. Any DBD packet sent from the Slave, again either with a non-empty or empty body, is a response. A DBD packet can have an empty body if the router needs to send a DBD packet to the neighbor (either from Master to repeatedly poll the Slave, or from the Slave to confirm the arrival of the DBD packet from the Master) but has no more LSDB entries to advertise itself.
There are two issues with this simple procedure. First, there is the issue of who out of two synchronizing routers will be the Master and who will be the Slave. This is resolved during the ExStart phase: both routers initially treat themselves as Master routers, and send DBD packets with random initial sequence numbers to each other, indicating the MS flag (Master) in their header. As they do this, the router with the lower RouterID moves to the Slave role, while the router with the higher RouterID remains in the Master role. The ExStart phase is basically finished after establishing the router's role in the synchronizing pair; at most two DBD packets are needed for that, one from each router. The Exchange phase then lasts until routers have exchanged the entire list of their LSDB entries using DBD packets.
The second issue is more subtle: how should the Master know whether the Slave needs to be polled further? Clearly, a situation may arise when the Master's LSDB is empty or smaller than the Slave's, and the Master will need to send fewer DBDs than the Slave to list all its LSDB contents. As the Slave can not send a DBD packet on its own, it somehow needs to tell the Master to poll it again. This is accomplished by another flag in DBD packet header, the M (More) flag. If a Slave replies to the Master's DBD packet with its own DBD packet and the M flag set, the Master knows the Slave needs to be polled again. The Master will stop polling the Slave after the last DBD packet fom the Slave has the M flag cleared.
The RFC 2328 has a nice ASCIIart graph of the adjacency coming up:
            +---+                                         +---+
            |RT1|                                         |RT2|
            +---+                                         +---+
            Down                                          Down
                            Hello(DR=0,seen=0)
                       ------------------------------>
                         Hello (DR=RT2,seen=RT1,...)      Init
                       <------------------------------
            ExStart        D-D (Seq=x,I,M,Master)
                       ------------------------------>
                           D-D (Seq=y,I,M,Master)         ExStart
                       <------------------------------
            Exchange       D-D (Seq=y,M,Slave)
                       ------------------------------>
                           D-D (Seq=y+1,M,Master)         Exchange
                       <------------------------------
                           D-D (Seq=y+1,M,Slave)
                       ------------------------------>
                           D-D (Seq=y+n, Master)
                       <------------------------------
                           D-D (Seq=y+n, Slave)
             Loading   ------------------------------>
                                 LS Request                Full
                       ------------------------------>
                                 LS Update
                       <------------------------------
                                 LS Request
                       ------------------------------>
                                 LS Update
                       <------------------------------
             Full
The I flag here is another flag in DBD headers called the Init flag, and is set only on initial DBD packets in the ExStart phase. If the router has established its Master or Slave role, it clears the I flag. This one is not really that important right now.
The Master/Slave relationship is built and relevant only during the initial LSDB synchronization when a new adjacency is being established. After the two routers go past the Exchange state, DBD packets are not used anymore, and the whole Master/Slave relationship is forgotten. Remember: Master/Slave is relevant only to DBD packets, and DBD packets are used only in ExStart/Exchange phases. Outside of these states, there are no DBD packets used, hence no Master/Slave relationships exist.
If there are, say, four routers, R1 till R4, connected to the same switch and run OSPF, during the OSPF bootup, there will be 5 temporary Master/Slave relationship built and torn down afterwards:
between the DR and BDR as they synchronize (assume those routers are R1 and R2)
between R3 and DR
between R3 and BDR
between R4 and DR
between R4 and BDR
Notice the Master/Slave relationship existed between those routers that went through ExStart and Exchange into the Full state. Also keep in mind that in the Full state, there are no more Master/Slave relationship present - they were only needed because of the specific needs of the DBD packet exchange.
Does this make the issue a little more clear? Please feel welcome to ask further!
Best regards,
Peter

Master and Slave Loops

I'm having problems with my Master and slave loop combination. I would like to be able to start and stop acquiring data from individual thermocouples. Please help.
Message Edited by nicholas03 on 04-13-2008 03:22 PM
Attachments:
eight thermo.JPG ‏106 KB

Dear Nicholas,
My first advise would be to check the examples on master-slave patterns, and run them step by step, looking at what the data does...
In a master-slave system, you use the queue to pass data from the master to the slave.   You're not passing data in the queue... in stead, you're passing data using local variables, which you should NOT do...
In the top loops, you should attach the temp array to the enqueue element.   In the bottom loop, you should remove the temp local, and instead get your data from the dequeue vi.
Also, you have to create a queue with the proper variable.   You can create a queue from any variable type, but it has to know beforehand, and the init vi.
Assuming you want to queue the temp array, you're basic structure should look like this:
It does help if you add your own code, so we can easier edit it for you... Otherwise we need to use photoshop on your design...
Message Edited by Anthony de Vries on 04-14-2008 11:30 AM
Attachments:
master-slave1.JPG ‏24 KB

Master and Slave configurations

Hi
I am currently wondering why my master and slave configurations dan't work. I have the Rev. B mother board and I set the jumpers to the right spots. I am trying to get my CD Burner to work with my regular CD Rom on the same wire.

Jarrett,
my experience with my 3 Beige G#'s (1 desktop and two towers), tells me that a master/slave configuration with two optical drives is not really possible/compatible.
As a matter of fact, I had to opt for the following solution:
- Sony 52X burner installed in the CD bay;
- Iomega 52X USB burner on the USB PCI card.
I also had a huge number of problems with the master/slave configuration of drives, and it only worked with certain brands of drives.
For instance, two WD drives would not get along in the same case (data corruption like there's no tomorrow.....)
I ended up having a WD and a Seagate, which still get a long nowadays in my B&W G3.
To give you some more curious feedback on the bad habits of the Beige machines........my old G3 now sits in my son's room.
Believe it or not, I had to remove the Sony burner, as the computer would not boot from it, at all.
It would read and play CD's but it would not boot, in the most standard of the configurations:
- CD Burner Master and 1 IDE drive as a slave;
- SCSI card with SCSI drive;
I replaced the burner with the APPLE CD-drive form my B&W, and the system started working and booting like magic (I swear....I did not change anything else).
It boils down to trying and experimenting. I spent countless hours with those machines trying to figure out why the same configuration working on my Beige minitower would not work on my daughter's Beige minitower, exactly identical machines, both with rev. B boards.
Hope this can help.
cheers

Why is most of the URL address, except for the domain name, in gray font? It's difficult to read. I would like to make the entire address font in black

[http://pics.livejournal.com/tersa/pic/006gzfsf Screenshot of the behavior]
Before I upgraded to Firefox 6.0, the URL address was displayed in black text.
After upgrading, it is now displaying only the core domain name (e.g, mozilla.com) in black text, while any extra text (like, https://support. ) is grayed out.
It is very difficult to read this gray text on my monitor. I'd like to make it so that the entire address is displayed in black text, but I couldn't seem to find any kind of configuration setting under Options to change this.
Please let me know if I can modify the URL display to be all black again.

That is a new feature in Firefox to highlight the domain in the URL bar. You can change a preference to make the entire URL dark.
Change a preference:
#type '''''about:config''''' in the Location/URL bar and press Enter.
#if you see a warning, accept (promise to be careful)
#Filter: '''''browser.urlbar.formatting.enabled'''''
#in lower panel, double-click that item to toggle value to '''''false'''''
I am not sure whether or not you need to re-start Firefox after doing the above for the change to take effect. Test and if it does not work, then re-start Firefox and test again.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]

How do I eliminate the http identity information on the url address line"

When you click on the down arrow on the HTTP line where the last URL address you keyed in is displayed - it will show the history of the last URL addresses you keyed in and visited. It will also display a second line known as "identity information". How do I get rid of this useless piece of information that forces a second useless line to be displayed?? I just want the URL addresses I had keyed in before to be displayed (one per line). Like all previous versions of Firefox and IE.
How do I do it????

Old Location Bar: https://addons.mozilla.org/firefox/addon/7637

I am using Mail 5.3 with two separate gmail addresses. One is personal the other is business. When I send emails from the business address, any auto-replies I get COME TO THE PERSONAL INBOX. I imagine that this is a setting? Please help!

I am using Mail 5.3 with two separate gmail addresses.
One is personal the other is business.
When I send emails from the BUSINESS address, any auto-replies/out of office notices I get come to my PERSONAL INBOX.
I imagine that this is a setting? Please help!

Edit the SMTP server list. Add a new one for the business account. Put the correct password and information for it. Give it a description so you will know which server is which. Mke sure the correct server is highlighted in the account selected and check the box to use only that server for that account. Do that for the other account also.

"They" changed the Podcast URL address. How 2 update the old address?

New podcasts weren't downloading.
I thought it was for all my subscriptions, but it turned out to be just the one. (Or two).
It took a little while to notice, but it turned out the the podcast providers, a radio station had changed the URL address for the podcast. (Just one word changed).
*I could not figure out how to update the old podcast subsrciption to the new address.*
*is it possible?*
Meanwhile; I subscribed again, which created a new entry under the same name as the old subscription but with the new address, and the podcast downloads for that subscription are running again.

bypass

Master and slave problem

Hi Everyone,
When I try to use the MAster and slave template which is provided by the NI itself, try to understand it how it works, but when I use this concept to implement in my code, just found there is the problem at there:
Problem:
1. The master loop always looping even though there do have a notification from the master to slave but the slave do not respond anything, can't figure the reason.
2. When the master loop is exit then the slave loop just start to execute but it is too late cos master loop already exit.
Those senario are different from the master and slave template. need your help.
Thanks
William Lee

Hi Williamlee,
Thanks for contacting National Instruments,
It would be much easier if we could see your code, this will help us work out where the issue is, and to help us understand where you maybe having issues...
Also I would like to include some more information with regards to the Master/Slave template.Developer Zone article : Application Design Patterns : Master/Slave and also a webcast on Software Design Architectures in NI LabVIEW
Kind regards,
Ashish Naik
Field Sales Engineer
National Instruments UK

Searching from the url address window has stopped working

If I type a string in the url address bar and touch enter, I now get an error message saying that it's not a valid web address: "The URL is not valid and cannot be loaded." It no longer searches in google for results. I've checked my about:config settings and they seem fine; keyword.url status is "default" and type is "string" with a blank value; for keyword.enabled, the status is "default", type is "boolean", and value is "true".

Hi,
You can also check '''browser.search.defaultenginename''' which has to be '''Google''' in this case.
If problems persist you can use [https://addons.mozilla.org/en-US/firefox/addon/searchreset/ SearchReset].
[http://kb.mozillazine.org/About:config about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
The [https://services.addons.mozilla.org/en-US/firefox/discovery/addon/config-descriptions/ Config Descriptions] add-on adds helpful source comments in about:config.

DNS addresses (master and slave) + personalizing the url address

Similar Messages

Maybe you are looking for