DNS and other issues with SBS Server 2003

I see a lot of excellent information out here in the discussion group but I understand little of it. I am technology savvy but not an IT man, so please be patient when I ask questions to clarify your responses.
My first question should be an easy one to answer. Has anyone told you all that they appreciate your help today?
I DO !!! Thank you for your kind nature and your choice to help others (like me)!
Our 2003 SBS server has multiple issues. The server has two NICs; one for the WAN connection and one for the LAN.
Windows IP Configuration
Host Name . . . . . . . . . . . . : mathewsserver01
Primary Dns Suffix . . . . . . . : MathewsElectricalInc.local
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes
DNS Suffix Search List. . . . . . : MathewsElectricalInc.local
Ethernet adapter Mathews Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #1
Physical Address. . . . . . . . . : 00-1E-C9-CE-C5-E7
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.16.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.16.2
Primary WINS Server . . . . . . . : 192.168.16.2
Ethernet adapter Network Connection to Router:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2
Physical Address. . . . . . . . . : 00-1E-C9-CE-C5-E6
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.yyy.xxx.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.yyy.xxx.1
DNS Servers . . . . . . . . . . . : 192.168.16.2
Primary WINS Server . . . . . . . : 192.168.16.2
NetBIOS over Tcpip. . . . . . . . : Disabled
#1 In Event Viewer (Local) Application I have recurring event Source=Userenv Event 1053 every 9 minutes.
#2 In Event Viewer Directory Service I have recurring event Source=NTDS General Event 1126 every hour.
#3 In Event Viewer DNS Server I have recurring event Source=DNS Event 6702.
Also, I am surprised that the LAN NIC #1 is not set up as DHCP!
What information may you require to assist me?
tmath2 in Houston

Hi,
Could you type “route print“ on CMD, and post the result here?
It would be helpful if you may describe the phenomenon of the problem? such as changes before the problem occurs, any prompt error message, related operations except for these logged Event ID.
You may reference the link below for reference.
Event Source Userenv and Event ID 1503:
http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+Operating+System&ProdVer=5.2&EvtID=1053&EvtSrc=Userenv&LCID=1033
Event Source NTDS and Event ID 1126：
http://support.microsoft.com/kb/305837
DNS 6702：
http://technet.microsoft.com/en-us/library/cc735806(v=WS.10).aspx
Best Regards,
Eve Wang
Thanks Eve! I appreciate your attempt to help. I inadvertently posted my reply for the Route table without quoting you first. Sorry about that.
As far as the problems go, time to logon to server > 5 minutes. Group Policy issues abound. DNS issues (as mentioned). Thought I had an easy one for you. Sorry about that.
I have one client computer running Windows 7x64 (call it My Workstation) that I back the server and other client PC's up to. The clients have no problem, but after a day or two, the server can no longer "see" the My Workstation and the backup fails.
But then when I reboot the My Workstation, the server "sees" it again!
Furthermore, I backup a 10TB RAID 6 array on
My Workstation to yet another client for redundancy (Call it WORKSTATION2-PC), but if I try to click on the computer icon in Windows Explorer for WORKSTATION2-PC, I get the error "Windows cannot access \\WORKSTATION2-PC. However if I type in
the ip address or WORKSTATION2-PC, I have no problems.
tmath2 in Houston

Similar Messages

Mac osx 10.6 with sbs server 2003

Hi everyone
i m using mac osx 10.6 on my imac . i want to connect it with sbs server 2003 , then i want to to make a map drive on it .I m trying it to cmd+k to connect with server but it not connecting , i m wondring do i need to configure any thing else to connect with windows server .
cheers

Hi John,
thanks for your advice, I have actually been using the two links you provided,
yet they both lack support for the home user, and all suggest that the users have a static ip address, but this is sadly not the case.
has anyone used . http://www.dyndns.com/about/home_solutions.html
Does anyone use this service at home for their server and which settings did they use ?
This would at least let me think Im working along the right lines.
Im getting stuck with the Primary DNS questions along the setup route from apple setup. : (
thanks again
Yaddle.

JDK issues with Windows Server 2003 SP2 Standard Edition

Hi,
We are running an ETL (Extracts-Transform-Load) Jar file which reads data from MS Commerce Server 2002, AS400 and SQL Server 2000 database and populates a SQL Server 2000 database. The jar was running fine on Windows Server 2000 but started to stall when we are running it from our newly acquired Windows Server 2003 SP2 server class machine. The JDK version is 1.4 on Windows 2000 and 1.6 on Windows Server 2003. Interestingly, the jar is running fine via JDK 1.6 on another Windows Server 2003 dev machine.
The jar does not throw any error and we have to manually shutdown the execution of the jar.
Can anyone please suggest some solutions here?
Thank you!

Um, does this have anything to do with JavaMail? If not, you might try a more appropriate forum.

JDK issues with Windows Server 2003 SP2

Hi,
We are running an ETL (Extracts-Transform-Load) Jar file which reads data from MS Commerce Server 2002, AS400 and SQL Server 2000 database and populates a SQL Server 2000 database. The jar was running fine on Windows Server 2000 but started to stall when we are running it from our newly acquired Windows Server 2003 SP2 server class machine. The JDK version is 1.4 on Windows 2000 and 1.6 on Windows Server 2003. Interestingly, the jar is running fine via JDK 1.6 on another Windows Server 2003 dev machine.
The jar does not throw any error and we have to manually shutdown the execution of the jar.
Can anyone please suggest some solutions here?
Thank you!

Um, does this have anything to do with JavaMail? If not, you might try a more appropriate forum.

Imessage and other Issues with 3rd Gen iPad

Hi there, just got a 3rd Gen iPad for the mrs and so far it's been great.
However, several rather annoying issues have developed and I can't seem to find the right trouble shooting for it, so I thought I'd try here.
So here they are:
iMessage & facetime don't work
Issue 1- Each time she uses her Apple ID log in for either feature a message "iMessage Activation: Could no sign in. Please check your network connection and try again". I've checked the network settings, I've reset them on the iPad and yet it seems to persist. Her appleID is valid as it works on her iPhone, which is using the same network/Wifi as the iPad, yet the iPad seems to decide it doesn't want to activate. I've signed in on my appleID and the same message seems to appear
Issue 2 - When using apps like Chrome a constant message will appear "Connect to iTunes to use push notifications" every time the app is open. This has been done, it's been backed up and it has connected to iTunes, yet these messages still pop up each time chrome is opened.

I also am having issues with my ipad mini as far as imessage . sometimes it works fine . Sometines I receive ok but it hangs on sending . i have tried everything . I think the apple server is a mess Most times I can only send If i am replying to a message i received . If i try to start a message it hangs . No reason found

Weird graphics and other issues with internet explorer in all versions.

One of our laptops has an issue with their Internet Explorer. First, whenever the user logs on and starts internet explorer and navigates to any website, the website loads for a bit but then immediately displays a "Page cannot be displayed" error.
Every single time. If we try browsing again/refreshing the page it loads fine. But during regular browsing, we might get that page again.
Another issue that happens is sometimes the graphics logos won't load properly. See screenshot:
http://i.imgur.com/0usOPpu.jpg
And this happens a lot. If this won't happen, the websites will only load with half its formatting missing.
Now we have:
-Thoroughly checked computer for viruses. Several full scans have been done with MalwareBytes with no issues found. Microsoft Security Essentials has been installed, full scan done, no viruses/spyware/adware found.
-We have tried upgrading to IE11. Same issue. Downgraded to IE10. Same issue. Downgraded to IE9, same issue yet again. IE was Reset each time.
We checked if it could be a network issue, but none of the other computers connected to the same switch has issue like that.
Any suggestions/ideas to try?

Hi,
I suggest you temporary disable antivirus and firewall, then check the result.
You may try the steps from the links below to check the issue:
"Internet Explorer cannot display the webpage" error
http://support.microsoft.com/kb/956196/en-us
Internet Explorer "Page Cannot be Displayed" error due to Bad Proxy Server Timeout
http://support.microsoft.com/kb/2551554
You may also refer to the computer or device manufacturer website and try installing the latest version of chipset, graphics card and video card drivers and check.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Battery not recognised - and other issues with 867MHz Ti Book

Ok - here`s my story - I wonder if anyone can give me advice
on what to do next.
A week ago I started having trackpad issues with my tibook.
On 2 consecutive mornings the trackpad seemed to have frozen, held down. So that it brought up menus if the mouse was moved over one of the bars at the top of the screen. I wasn`t however, able to `click` on anything. An external
mouse, when plugged in, also didn`t work, though I was able to navigate the display using the keyboard shortcuts.
The first morning this happened, the OS also appeared to reset itself. ie the screen display picture went back to its original state - and all of the applications that i subsequently opened gave me a first time user `welcome` message.However, all of my files/photos/music etc were intact.
When the trackpad was working I backed everything up, ran
the hardware test cd, which came up clear, and called apple. They picked up the computer, which is under
warranty, on Friday, and at the time it was working fine.
I got the computer back yesterday, but unrepaired, and
with a new set of faults. Apple told me that they had checked the computer and had found
some evidence on the logic board, power in and bottom case
of past liquid spillage - but no other problems with the
computer. I don`t deny the liquid spillage ( a few ml of
water), although it
occurred 11 months ago and I have not had any problems with
the computer since 24 hours after the spill.
The state of the computer now that Apple have sent it back
is as follows: The trackpad is working. However, the computer is not recognsing the battery, or the wireless
networking Buffalo pc card. The clock also resets one out
of every 2 or 3 times that I restart the computer. These problems did not occur before I sent the computer to Apple.
Yesterday I erased and reinstalled 10.4 just in case that had
something to do with it - but it has not helped
So - my questions.
1. Could my current problems be to do with the spillage
on the logic board 11 months ago?
2. Could my new problems be to do with something that Apple
did when testing the computer this week?
3. Is there anything else that I should try in order to solve the issues that I`m having with the computer?
4. If it is a logic board problem, can anyone recommend
a UK repair centre that would deal with this cheaply (otherwise i will probably buy a new computer - as this
one is coming up for 3 years)?
Thanks,
Antony

Hi Antony,
1. Could my current problems be to do with the spillage
on the logic board 11 months ago?
Yes. Corrosion occurs over time, and it could have taken 11 months to reach "critcal mass."
2. Could my new problems be to do with something that Apple
did when testing the computer this week?
Theoretically, any time anyone does anything inside your PB, they could have caused additional issues, however, this would not be "normal."
3. Is there anything else that I should try in order to solve the issues that I`m having with the computer?
4. If it is a logic board problem, can anyone recommend a UK repair centre that would deal with this cheaply (otherwise i will probably buy a new computer - as this one is coming up for 3 years)?
Before paying for a new LB or a new PB, try a PMU Reset and Test PB Backup Battery.

My trash can shows empty and other issues with it...

Ok basically, if i delete anything on my mac it should go to my trash can right?
Well i have a few problems with that as follows:
1. Everytime i delete something or move something to the trash it asks me to enter my password everytime, then deletes it, this never used to happen and now all of a sudden it does, this started just before the latest lion update and ive tried everything i know to stop it doing it but failed.
2. When i do delete something, the trash can shows empty on my desktop, and when i open the trash there is nothing inside, so im not able to restore anything if required, so basically if i move anything to trash it just gets permanently deleted instead of storing it in trash first, again this started just before the latest lion update.
I was hoping the update would fix this issue but didnt change it what so ever, i have also tried repairing disk permissions and still no change.
Any ideas on what i can do to fix these problems? Im still new to mac so i dont know all the ins and outs, but any help on this would be appreciated.
Cheers all,
Carl

Boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Memory leak issue with link server between SQL Server 2012 and Oracle

Hi,
We are trying to use the linked server feature with SQL Server 2012 to connect SQL server and Oracle database. We are concerned about the existing memory leak issue. For more context please refer to the link.
http://blogs.msdn.com/b/psssql/archive/2009/09/22/if-you-use-linked-server-queries-you-need-to-read-this.aspx
The above link talks about the issues with SQL Server versions 2005 and 2008, not sure if this is still the case in 2012. I could not find any article that talks about if this issue was fixed by Microsoft in later version.
We know that SQL Server process crashes because of the third-party linked server provider which is loaded inside SQL Server process. If the third-party linked server provider is enabled together with the
Allow inprocess option, the SQL Server process crashes when this third-party linked server experiences internal problems.
We wanted to know if this fixed in SQL Server 2012 ?

So your question is more of a information type or are you really facing OOM issue.
There can be two things for OOM
1. There is bug in SQL Server which is causing the issue which might be fixed in 2012
2. The Linked server provider used to connect to Oracle is not upto date and some patch is missing or more recent version is to be used. Did you made sure that you are using latest version.
What is Oracle version you are trying to connect(9i,10g, R2...)
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Access issue with Terminal server in MPLS network

Hi,
i have MPLS network and i have installed windows server 2003 with terminal server.
Problem - every 40 minutes, 2 hours server stopped pinging in spoke network while this worked in LAN,when we trace it by pinging of server IP address we get RTO,
after rebooting the server, we can easily access the server and work for again 40 to 2 hours.i am not able to understand the problem
i have troubleshoot -
1. restarted all network media during the problem
2. reset the LAN card of server
3. restarted the server
after all, it is not resolved.
please help me here to solve this issue.
Thanks,
Damodar
Regards, Damodar

Hi Abrante
thanks for your response but the issue of tftpboot still seems to be there. I am unable to find the issue here. We users try to load their images from the /tftpboot directory on the routers they get the following error messages
Error loading file: errno = 0x3c.
Can't load boot file!!
They are able to connect to another tftpboot server without any issues at all. I am not sure if I have missed out any configuration parameters while enabling tftp. Is there anywhy I can find tftp log files on the server.

Is J2EE compatible with Windows server 2003?

Is J2EE compatible with Windows server 2003? Whenever I try to install it says its not compatible, and the sun site only mention XP and 2000 Advanced Server.
Does anyone use J2EE on win2k3server? Which version do you use?

Which J2EE version are you trying to install and where did you download it from? J2EE 1.4 SDK should install and run on Windows 2003. At what point in installation exactly are you getting this message?

Issue with Dreamweaver - Server Busy error message

Hi,
Whenever i open Dreamweaver, i see "Server Busy" error message. I am unable to use the application due to this. Can you please help resolve this right away?
Regards,
Raghu

I am using Dreamweaver CC. This problem started after a recent update I think.
Operating system - Windows 8.1 Professional
Basic system config in case you need it - 8 GB RAM, 2 TB HDD, Intel i7
Regards,
Raghu
Date: Fri, 20 Dec 2013 11:18:44 -0800
From: [email protected]
To: [email protected]
Subject: Issue with Dreamweaver - Server Busy error message
    Re: Issue with Dreamweaver - Server Busy error message
    created by Nancy O. in Dreamweaver support forum - View the full discussion
Which ver and build # of DW?
Which operating System?
Do you use a testing server?
If so, which one and is it running?
   Nancy O.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5948026#5948026
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5948026#5948026
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5948026#5948026. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Can't sync IMAP inbox with Exchange Server 2003

Since Lion doesn't work with Exchange Server 2003, I set up an IMAP account in Outlook 2011 via Davmail for myself and a colleague on our laptops. This has worked for my e-mail account (syncs on multiple computers, including one running Exchange directly, and with my iPad's mail client), but not for my colleague.
For some reason, my colleague's inbox receives pushes from the server, but won't send back changes made in Outlook. Messages that have been read remain unread; deleted e-mails go into what is purportedly the server's trash in Outlook 2011, but remain in the inbox on the server. Changes made on the IMAP on the laptop also don't sync to my colleague's iPhone.
Our configuration is the same.
Any ideas? Could it be on the server side?
Thanks!

I feel your pain. I also am a lone Mac user in an entire building full of PC robots, and the IT people haven't got a clue.
I've been trying to get Mac mail working with the Exchange server here, but it's just not happening. I've managed to get Entourage working though, which is far from ideal but significantly better than the web-based version of Outlook that I'd been having to use up till now.
For entourage, then yes - the incoming and outgoing servers are the same. You may need to ask your recalcitrant IT people which port numbers to use, but give it a whirl anyway.
Best of luck,
Boris
UK

Issues with JMS Server migration

Hi All,
I have issue with JMS server migration.
I have configured clustred environment with 2 Managed server (MS1 & MS2) and with one JMS Server which is running on MS1 and configured for auto migration, when I start both my managed server once and access the application very functionality works fine and when I stop the MS1 the JMS server successfully geting migrated to MS2 and in this scenarion also my application works as expected and when I restart the MS1 and access the application all the functionalities related to MDBs are executed twice.
However once we restart the MS1 we observe that in the monitor tab of MDB the connection status for both managed servers it show as connected.
As a result there is a redundancy when the MDB is executed
I am using Weblogic Server 10.3.0 & normal topics in the MDBs.
Please let me know is this a bug or am I missing any configuration.

Hi Suresh,
There is a "Bug-10007947" in WLS 10.3.0 version which dose not displays the values properly on admin-console once the migration has taken place, however I am assuming that bug may fix your issue so try that out in your test environment. If that dose not work try out the below suggestions.
Suggestion:
- Try the same test on different versions of WLS lower as well as on higher versions compared to WLS 10.3.0 (i.e WLS 9.2.X and WLS 10.3.x) and check what are the result.
- If in any other version your test runes properly, then you can create a simple test case and open a service request with Oracle asking for creating a BUG and let them do their job.
Hope above information helped you.
Regards,
Ravish Mody

Compatibility issue with outgoing server; they suggest downloading Thunderbird. Any suggestions?

My internet provider says there is a compatibility issue with outgoing server and suggest downloading Thunderbird. Any comments?

Not without some details from you.
What version of OSX
Who is the mail provider
If not iCloud mail what type is it (POP or Imap)
That's a start.

DNS and other issues with SBS Server 2003

Similar Messages

Maybe you are looking for