DNS - Between Active Directory Domains
Hi to all. I am in the process of migrating objects from domain A (10.26.x.x) to domain B (10.44.x.x). Servers and Services in domain A must remain visible to objects migrated to domain B. AD trust is in place (forest).
I have a laptop on site of domain A (IP 10.26.x.x) but which is a member of domain B. It can ping servers in domain A by FQDN my-server.domain.com however services running on the laptop do not use the FQDN and need to be able to ping 'my-server'.
Any advice and how I can achieve this?
Thanks,
Phil.
This issue has been resolved. A DNS suffix is now appended for the required domain via group policy.
Regards,
Phil.
Similar Messages
-
Help with setting up active directory domain controller/DNS - need this for Clustering
Disclaimer: I am new to Active Directory, so please dont rule out the obvious things I may have overlooked.
I need to set up Active Directory Domain controller on at least one server so I can run clustering. I set up the domain controller and ran Cluster validation and that failed - unable to reach writable domain controller.
When I look at my server manager AD DS complain about DNS:
NASE-2012-234 4015 Error Microsoft-Windows-DNS-Server-Service DNS Server 1/14/2014 12:54:06 AM
The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
When I click on DNS this is the error:
The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
Output of DCDiag -v is below.
PS C:\Users\Administrator> dcdiag -v
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine NASE-2012-234, is a Directory Server.
Home Server = NASE-2012-234
* Connecting to directory service on server NASE-2012-234.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=lab,DC=nase,DC=com,LDAP_SCOPE_SUBTREE,(objectCategory=
ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=lab,DC=nas
e,DC=com
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=lab,DC=nase,DC=com,LDAP_SCOPE_SUBTREE,(objectClass=ntD
SDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=NASE-2012-234,CN=Servers,CN=Default-First-Site-Name,CN=Sites,C
N=Configuration,DC=lab,DC=nase,DC=com
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\NASE-2012-234
Starting test: Connectivity
* Active Directory LDAP Services Check
The host c0c507c4-fb9b-49a6-9a01-ef79d7960c94._msdcs.lab.nasecom could not be resolved to an IP address.
Check the DNS server, DHCP, server name, etc.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... NASE-2012-234 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\NASE-2012-234
Skipping all tests, because server NASE-2012-234 is not responding to directory service requests.
Test omitted by user request: Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Test omitted by user request: FrsEvent
Test omitted by user request: DFSREvent
Test omitted by user request: SysVolCheck
Test omitted by user request: KccEvent
Test omitted by user request: KnowsOfRoleHolders
Test omitted by user request: MachineAccount
Test omitted by user request: NCSecDesc
Test omitted by user request: NetLogons
Test omitted by user request: ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Test omitted by user request: Replications
Test omitted by user request: RidManager
Test omitted by user request: Services
Test omitted by user request: SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Test omitted by user request: VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : lab
Starting test: CheckSDRefDom
......................... lab passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... lab passed test CrossRefValidation
Running enterprise tests on : lab.nasecom
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\NASE-2012-234.lab.nasecom
Locator Flags: 0xe000f3fd
PDC Name: \\NASE-2012-234.lab.nasecom
Locator Flags: 0xe000f3fd
Time Server Name: \\NASE-2012-234.lab.nasecom
Locator Flags: 0xe000f3fd
Preferred Time Server Name: \\NASE-2012-234.lab.nasecom
Locator Flags: 0xe000f3fd
KDC Name: \\NASE-2012-234.lab.nasecom
Locator Flags: 0xe000f3fd
......................... lab.nase.com passed test LocatorCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope provided by the command line arguments
provided.
......................... lab.nasecom passed test Intersite
PS C:\Users\Administrator>http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverDS is the forum for Directory Services questions. You might want to post your question there.
.:|:.:|:. tim -
DNS and Active Directory error 4000 server 2008
Hello all,
My network skills aren't very good and I'm facing a dilemma. First off we have two Windows servers on the network. The newest is 2008 Standard (named Vader) and the other is 2000 (dells3). Obviously I'd like to get rid of the 2000, but the people in charge
of my budget haven't given me the option to do so and it's the only back up we have.
Earlier in the week we had lots of problems. One of our nas boxes locked everyone out who was mapped to it and it would only let me log in through the web portal. Two of our Macs our marketing department uses suddenly locked up and wouldn't let them back
in (both were part of the Active Directory). A second nas box won't let certain people map to it and for awhile I had issues logging into Vader itself.
I believe all of these problems are connected to some issues on Vader and possibly in conduction with dells3. In Server Manager under DNS I get error 4000 "The DNS server was unable to open Active Directory.
This DNS server is configured to obtain and use information from the directory for this zone and is unable to load the zone without it. Check that the Active Directory is functioning properly and reload the zone. The event data is the error code."
Then under Active Directory Domain Services I get error 2042 "It has been too long since this machine last replicated with the named source machine. The time between replications with this source has exceeded
the tombstone lifetime. Replication has been stopped with this source."
Followed by more text I can post if needed.
Under File Services error 1202 "The DFS Replication service failed to contact domain controller to access configuration information. Replication is stopped. The service will try again during the
next configuration polling cycle, which will occur in 60 minutes. This event can be caused by TCP/IP connectivity, firewall, Active Directory Domain Services, or DNS issues."
And finally if I try to open Active Directory Domains and Trusts "The configuration information describing this enterprise is not available. The server is not operational."
I'm not sure where to start or what to post that might help. Any and all help is appreciated.
Edit: Also I can only add dells3 as the DNS on Vader in the DNS Manager if I try to add Vader to itself I get an error.It's the other way around. Overall, I'm advising ripping the 2008 server out of AD and adding it back . Let's look at this as a series of steps:
1.) You do a force demote of the 2008 server because it's tombstoned. This means the 2008 server is no longer a DC. You are doing a force because it doesn't have the ability to replicate. If it could replicate, we'd just do a graceful demotion
and be done with it.
2.) Once the 2008 server is demoted, we go to the 2000 server which holds the only good copy of AD. From that server we run a metadata cleanup using the ntdsutil utility. We use that utility to clean out references to the 2008 server which is
no longer a DC.
3.) Once you have a clean AD, you can then promote the 2008 server back into Active Directory. Make sure Vader is pointing to Dells3 as its primary DNS server before promoting or you'll run into issues.
Hopefully that clarifies things. -
Active directory domain services stopped after removing routing and remote access role
Hello everyone;;
I am in deep trouble.. I did install routing and remote access and then lost connection to the server remotely. Then I connected a monitor to the server and removed the role... then it asked me to restart the server . After logging back in I found
all my active directory service has gone... I can see red cross on active directory domain services.. Also I am able to ping other pcs but other pcs cannot ping my server..
However when I go into the active directory services, it shows all services are running except file replication service. I have tried to start that service but it give error 1053 error..
My server in between loses LAN connection... I dont know what is going on.. Please help!!!
My server is win 2008 R2 ser pack 1
Only one DC....
Has fixed ip,
no DNS server running..Hi,
The File Replication Service Start Error 1053 error can be caused by damaged Windows system files. Corrupted system files entries can threaten the well-being of your computer. Many events can result in creating system file errors.
Please refer to the articles below to troubleshoot the issue:
File Replication Service Start Error 1053
http://repairerrors.net/file-replication-service-start-error-1053.html
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I have 2 domain controllers running 2003 server, server1 and server2. I ran dcpromo on server1 and removed AD and removed him from the domain and disconnected from network. I then added a 2012 server
with the same name and IP address server1 with no problem. Replication from sites and services work fine on both controllers.
The new 2012 server1 is GC. I transferred all FSMO roles to server1. Again no problem and replicating using sites and services. AD on server1 is populated correctly.
Now what I had intended on doing was a dcpromo to remove server2 from the domain so I can then add another 2012 server. That is when I get the: "The box indicating that this domain controller is the last controller for the domain
is unchecked. However, no other Active Directory domain controllers for that domain can be contacted.
I have DNS installed on both servers and both look good with replicating there. Strange thing is when on the 2012 server within DNS if I right click and connect to another DNS server I can add server2 just fine but from server2 adding server1 it tells me it
is not available.
Help please!Hi,
As there is server 2012 DC (SERVER1) DC is operational in a domain then "This domain controller is the last controller for the domain" should be remain unchecked when you demote SERVER2 DC.
If you are getting error "Active Directory domain controllers for that domain can be contacted" while demoting SERVER2 DC then check the DNS pointing on both as per below article, disable windows firewall on all DC, less possiblities but worth to check if both
are different site then check the ports are open on firewall.
http://abhijitw.wordpress.com/2012/03/03/best-practices-for-dns-client-settings-on-domain-controller/
http://technet.microsoft.com/en-us/library/cc766337(v=ws.10).aspx
http://social.technet.microsoft.com/wiki/contents/articles/584.active-directory-replication-over-firewalls.aspx
run “ipconfig /flushdns & ipconfig /registerdns“, restart DNS server and NETLOGON service on each DC and try to demote server2 DC.
If issue reoccurs, post dcdiag /q result.
NOTE: If initial replication was completed between both DC (new 2012 and old DC) then you may remove the server2 DC from Active Directory forcefully (DCPROMO /FORCEREMOVAL) and perform metadata cleanup.
Active Directory Metadata Cleanup
http://abhijitw.wordpress.com/2012/03/03/active-directory-metadata-cleanup/
Best regards,
Abhijit Waikar.
MCSA | MCSA:Messaging | MCITP:SA | MCC:2012
Blog: http://abhijitw.wordpress.com
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees and confers no rights. -
Forest trust unable to find Active Directory Domain Controller
I have two domains with a two-way forest trust. We'll call them ForestA and ForestB. They're on seperate subnets. ForestA's DCs are in one physical location. ForestB's DCs are in two locations, one of which is shared with A.
I'm unable to route traffic directly from the remote DC in ForestB to the subnet ForestA is on, so I created a new DC in ForestA that sits on the subnet ForestB uses (basically, I can't route between subnets via the wireless bridge between locations, but
can within the same location).
I found this: http://www.neomagick.net/zen/2008/11/30/using-dns-to-force-a-domain-trust-through-a-specific-domain-controller-dc/
I followed the instructions to set the new DC in forest A to be the only one the remote DC in forest B was aware of.
Nslookup ForestA.com resolves correctly to this DC, but I'm unable to validate the trust relationship, getting the error:
"Windows cannot find an Active Directory Domain Controller for the ForestA.com domain. Verify that an AD DC is available and then try again."
I'd appreciate any help.In the event viewer, have you found any event id's that corrospond with this error? Have you ensured all ports required are open? Windows firewall is correctly setup? NIC is properly configured?
Statement below taken from: http://technet.microsoft.com/en-us/library/cc961803.aspx
If you receive the following error, ERROR_NO_LOGON_SERVERS while using the Nltest tool to query the secure channel, this is usually indicative of the inability to find a domain controller for that domain. Run nltest /dsgetdc: < DomainName > : to verify
whether you can locate a domain controller. If you are unable to find a domain controller examine DNS registrations and network connectivity.
ADDS Ports:
http://msdn.microsoft.com/en-us/library/dd772723(v=ws.10).aspx -
Join acs express to active directory domain
i have a problem joining acs express active directory domain , both are reachable to each other in the same subnet & no firewalls between them , but when i test the connectivity it gives this error:
" required service unavailable. DNS is setup correctly , and the domain controller is reachable , however , one of the required services, such as ldap,kerberos, or global catalog service is not available. This issue may arise if there is a firewall between AD domain controller, and the ACS Express appliance"It is sounds like a bug CSCsw29387 Join AD domain, with one DC down fails. If the ACS Express is trying to join an AD domain in a multi domain controller environment and one of the domain controllers is down, the ACS Express will fail to join the domain.
-
Active Directory domain controller could not be contacted
Hello
Help please.
I am trying to add a new server (2008) to domain 'bridgelimited.local' - only one DC (2003) doing everything at the moment. The plan is to add the new server, then move everything over from the old machine, then retire/upgrade the old machine and use as a backup.
I am currently trying to dcpromo on the new machine but I get the following error:
The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller for domain bridgelimited.local:
The error was: "DNS name does not exist."
(error code 0x0000232B RCODE_NAME_ERROR)
The query was for the SRV record for _ldap._tcp.dc._msdcs.bridgelimited.local
Common causes of this error include the following:
- The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses:
212.50.160.100
196.168.16.2
- One or more of the following zones do not include delegation to its child zone:
bridgelimited.local
local
. (the root zone)
For information about correcting this problem, click Help.
192.168.16.2 is IP address for the DC.
Any help would be grately appreciated.
Kind Regards
RichardManaged to get the DCDIAG
Here goes (I know my harddisk is failing - that's why I am desperate to get everything shifted to the new server).
Domain Controller Diagnosis
Performing initial setup:
* Verifying that the local machine bridgeserver, is a DC.
* Connecting to directory service on server bridgeserver.
* Collecting site info.
* Identifying all servers.
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\BRIDGESERVER
Starting test: Connectivity
* Active Directory LDAP Services Check
* Active Directory RPC Services Check
......................... BRIDGESERVER passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\BRIDGESERVER
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
* Replication Site Latency Check
......................... BRIDGESERVER passed test Replications
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... BRIDGESERVER passed test Topology
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... BRIDGESERVER passed test CutoffServers
Starting test: NCSecDesc
* Security Permissions Check for
DC=ForestDnsZones,DC=BridgeLimited,DC=local
(NDNC,Version 2)
* Security Permissions Check for
DC=DomainDnsZones,DC=BridgeLimited,DC=local
(NDNC,Version 2)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local
(Schema,Version 2)
* Security Permissions Check for
CN=Configuration,DC=BridgeLimited,DC=local
(Configuration,Version 2)
* Security Permissions Check for
DC=BridgeLimited,DC=local
(Domain,Version 2)
......................... BRIDGESERVER passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
......................... BRIDGESERVER passed test NetLogons
Starting test: Advertising
The DC BRIDGESERVER is advertising itself as a DC and having a DS.
The DC BRIDGESERVER is advertising as an LDAP server
The DC BRIDGESERVER is advertising as having a writeable directory
The DC BRIDGESERVER is advertising as a Key Distribution Center
The DC BRIDGESERVER is advertising as a time server
The DS BRIDGESERVER is advertising as a GC.
......................... BRIDGESERVER passed test Advertising
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
Role Domain Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
Role PDC Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
Role Rid Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
......................... BRIDGESERVER passed test KnowsOfRoleHolders
Starting test: RidManager
* Available RID Pool for the Domain is 2609 to 1073741823
* bridgeserver.BridgeLimited.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 2109 to 2608
* rIDPreviousAllocationPool is 2109 to 2608
* rIDNextRID: 2121
......................... BRIDGESERVER passed test RidManager
Starting test: MachineAccount
* SPN found :LDAP/bridgeserver.BridgeLimited.local/BridgeLimited.local
* SPN found :LDAP/bridgeserver.BridgeLimited.local
* SPN found :LDAP/BRIDGESERVER
* SPN found :LDAP/bridgeserver.BridgeLimited.local/BRIDGELIMITED
* SPN found :LDAP/96d36b0b-a148-4c2f-b3d3-8c2ac83fcaf9._msdcs.BridgeLimited.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/96d36b0b-a148-4c2f-b3d3-8c2ac83fcaf9/BridgeLimited.local
* SPN found :HOST/bridgeserver.BridgeLimited.local/BridgeLimited.local
* SPN found :HOST/bridgeserver.BridgeLimited.local
* SPN found :HOST/BRIDGESERVER
* SPN found :HOST/bridgeserver.BridgeLimited.local/BRIDGELIMITED
* SPN found :GC/bridgeserver.BridgeLimited.local/BridgeLimited.local
......................... BRIDGESERVER passed test MachineAccount
Starting test: Services
* Checking Service: Dnscache
* Checking Service: NtFrs
* Checking Service: IsmServ
IsmServ Service is stopped on [BRIDGESERVER]
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: RpcSs
* Checking Service: w32time
* Checking Service: NETLOGON
......................... BRIDGESERVER failed test Services
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test
because /testdomain: was not entered
......................... BRIDGESERVER passed test OutboundSecureChannels
Starting test: ObjectsReplicated
BRIDGESERVER is in domain DC=BridgeLimited,DC=local
Checking for CN=BRIDGESERVER,OU=Domain Controllers,DC=BridgeLimited,DC=local in domain DC=BridgeLimited,DC=local on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local in domain CN=Configuration,DC=BridgeLimited,DC=local on 1 servers
Object is up-to-date on all servers.
......................... BRIDGESERVER passed test ObjectsReplicated
Starting test: frssysvol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... BRIDGESERVER passed test frssysvol
Starting test: frsevent
* The File Replication Service Event log test
......................... BRIDGESERVER passed test frsevent
Starting test: kccevent
* The KCC Event log test
Found no KCC errors in Directory Service Event log in the last 15 minutes.
......................... BRIDGESERVER passed test kccevent
Starting test: systemlog
* The System Event log test
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:47:27
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:47:41
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:47:55
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:48:09
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:48:23
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:48:38
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:48:52
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:49:06
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:49:20
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:49:54
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:50:08
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:50:22
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:51:33
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:51:53
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:52:07
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:52:21
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:52:35
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:52:49
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:53:03
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:53:17
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:53:31
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:53:45
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:12:23
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:12:37
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:12:51
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:13:05
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:13:19
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:13:33
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:13:47
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:14:01
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:14:15
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:15:24
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:15:38
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:15:53
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:16:07
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:16:21
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:16:35
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:16:49
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:17:03
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:17:17
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
......................... BRIDGESERVER failed test systemlog
Starting test: VerifyReplicas
......................... BRIDGESERVER passed test VerifyReplicas
Starting test: VerifyReferences
The system object reference (serverReference)
CN=BRIDGESERVER,OU=Domain Controllers,DC=BridgeLimited,DC=local and
backlink on
CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=BRIDGESERVER,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=BridgeLimited,DC=local
and backlink on
CN=BRIDGESERVER,OU=Domain Controllers,DC=BridgeLimited,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=BRIDGESERVER,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=BridgeLimited,DC=local
and backlink on
CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
are correct.
......................... BRIDGESERVER passed test VerifyReferences
Starting test: VerifyEnterpriseReferences
......................... BRIDGESERVER passed test VerifyEnterpriseReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : BridgeLimited
Starting test: CrossRefValidation
......................... BridgeLimited passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... BridgeLimited passed test CheckSDRefDom
Running enterprise tests on : BridgeLimited.local
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... BridgeLimited.local passed test Intersite
Starting test: FsmoCheck
GC Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
PDC Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
Time Server Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
Preferred Time Server Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
KDC Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
......................... BridgeLimited.local passed test FsmoCheck
The only thing I can see (other then the HDD) is the
IsmServ Service is stopped on [BRIDGESERVER]
Hope you can help. Pretty please.
Kind Regards
Richard -
Active Directory Domain Services Child Domains
I am using Windows Server 2008 R2 SP1.
http://technet.microsoft.com/en-us/library/cc771856(v=ws.10).aspx
When I select "Add Roles" I click on "Active Directory Domain Services (Installed)" the "Next>" button is not enabled and can not be selected.
Did I install ADDS wrong?
Is this not how you define Child Domains?
If I use the Command Line or Answer File Methods I get an error message at "ChildName".
Did I forget to install something about enabling Child Domains when installing ADDS?Hi,
Did you try to create a child domain on the Domain Controller? It seems like that this Server is already a DC, with Active Directory Domain Services installed.
We don’t have to enable anything in the root domain for creating child domains/new trees, we just need to run
Dcpromo or Add Role on another server which is not a DC, and select the existing domain as its parent, then the child domain will be created.
In addition, please make the existing DC as the preferred DNS server on the new server.
I hope this helps.
Amy -
Cisco ISE 1.2 and 2 Active Directory Domains
Hi Support,
does anyone know whether I can perform Certificate Authentication for two different Active Directory domains using the same ISE host / deployment?
We have two forests with a trust link between them.
We have a seperate PKI in each domain.
I am thinking that the ISE can only be joined to a single domain, but because we have a trust between the two forests, the ISE can have two certificate profiles in an identity source sequence which can then use in a single authorisation policy.
I take it that I would need local certs from each CA in the local certificate store of the ISE?
We are performing a company merger and we cannot migrate users to the primary AD domain due to several reasons so we would like to use the same ISE deployment to authenticate Wireless users on both AD domains.
Thanks
MarioMario,
This is possible. Here are the guidelines for the Multi-Forest support in ISE 1.2:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_man_id_stores.html#pgfId-1350874
You would have to set a new Certificate Authentication Profile for each domain and use the Authentication Policies to determine which of the Certificate Authentication Profiles to use.
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_man_id_stores.html#pgfId-1349174
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton -
Active Directory domain failed
Hello Team,
When i joined to our active directory, everytime bui gives same error messages:
The attempt to join the Active Directory domain failed either because the clocks of the appliance and the domain controller are skewed or the administrative user
does not have the appropriate permissions to create a computer account in Active Directory.
It is recommended that NTP be used to keep clocks synchronized when using Active Directory.
Storage Appliance: 7310 One Controller, No firewall for ntp server also which connect directly NTP Domain server. Actually my believe is that no time sync issue.
Firmware version is latest patch.
What is your idea about this issue?
i did many times this action plan: but result is same
ActiveDirectoryTasks
B)Joining a Domain
1.Configure an ActiveDirectory site in the CIFS context. (optional)
2.Configure a preferred domain controller in the CIFS context. (optional)
3.Enable NTP, or ensure that the clocks of the appliance and domain controller are synchronized
to within five minutes.
4.Ensure that your DNS infrastructure correctly delegates to the ActiveDirectory domain, or add
your domain contoller's IP address as an additional name server in the DNS context.
5.Configure the ActiveDirectory domain, administrative user, and administrative password.
6.Apply/commit the configuration.
A)Joining aWorkgroup
Configure theworkgroup name.
Apply/commit the configuration.
1. First of all LAN Compatibility Mode 4 works fine with Win 2003 (AD Server)
2. While trying to join the AD, using a non ADMIN username and passsword will not help
Try using a username/pass which has Administrative Privileges (specifically having the rights for Account Creation in
the AD Server) on the AD server.
(I was trying by a different username/pass but it was not joing the storage to AD. It joined when i tried a user having
the privileges to create Machine Accounts in AD)
3. For Clock Sync, the tolerance limit is upto 5 Minutes..So you can take care that the difference does not go beyond
5 minutes.
Thanks
Can
Gantek Tech.Your first post to these OTN forums.
You posted your inquiry to a HARDWARE forum.
Your issue seems to be a Microsoft OS issue and you just happen to have your OS volumes on a model 7310 appliance.
I suggest you go find a forum somewhere that is hosted for Microsoft AD issues.
If you happen to need the documentation for that piece of storage hardware, there are currently three PDF's available:
http://docs.oracle.com/cd/E19935-01/index.html
They are the Installation Guide, the hardware Administration Guide, and the Service Manual.
There are no current Oracle-published documents for that box as related to Active Directory. -
Documentation on Active Directory Domain Rename for VMware
Aplogies if my questions are elementary. Just getting started with VMware.
We are looking to update our virtualized Active Directory domain name. I have the documentation for that, but want to make sure I have the list of articles needed to make sure the VMware is properly updated as well.
I found the following documents:
configure host to use active directory:
https://pubs.vmware.com/vsphere-51/index.jsp?topic=%2Fcom.vmware.vsphere.security.doc%2FGUID-63D22519-38CC-4A9F-AE85-97A53CB0948A.html
setting DNS configuration vmware
http://pubs.vmware.com/vsphere-51/index.jsp?topic=%2Fcom.vmware.vcli.examples.doc%2Fcli_manage_networks.11.8.html
Is there anything else?
Which do I update first? The VMware info or the Active Directory.Hi David,
Based on my experience, you’d better pay attention to the following two points:
1. After you have completed the installation of Exchange 2010, you have to create an Accepted Domain of “uvwxyz.org”.
2. If you want to use Autodiscover, you need to configure the additional settings for “uvwxyz.org”. You could refer to the article below:
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/exchange-autodiscover.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any further questions, please do not hesitate to post back.
Best regards,
Eric -
Have a very recent Lenovo Ideapad Laptop running Windows 8.1. Connected via USB port to HP LaserJet Pro CM1415 frw Color MFP Printer. Was able to print fine nearly 2 weeks ago, but something recently happened - either a new windows or office 2013 update
or perhaps I blew away a certain file by mistake. I can see the printer installed but cannot print to it from anything (Word, Notepad, IE, Firefox etc.). The one thing to note is that usually when I plug or unplug a USB related device, Windows 8.1 recognizes
this and makes a certain chime noise, but with the printer USB cable it never makes that noise - making me think that it never fully recognizes the printer. Also when I select the printer (from within the control panel) and right click for properties (via
admin rights) It never lets me fully connect to it.
I have tried all the usual remedies - remove, install all drivers, reinstall printer, Windows update, start/stop print spooler and all other printer related services, etc. Its really annoying because this printer was working fine nearly 2
weeks ago. Looking for any advice now. Thanks.
-ChrisHi Chris,
à
I have tried all the usual remedies - remove, install all drivers, reinstall printer, Windows update, start/stop print spooler and all other printer related services, etc.
I noticed that you had reinstalled the printer. Just a confirmation, when un-install this printer, please check
if this printer still exist in registry. For more details, please refer to following KB.
Registry entries for printing
If printer entry still exist in registry, please delete that printer entry and re-install this printer again,
then check if this issue still exists. (Please backup registry entries before operating registry. It will help us to avoid unexpected issue.)
àand now see
message Active Directory Domain Services is not available
By the way, would you please let me know where/when get this
Active Directory Domain Services is not available error message? Or provide a screenshot of it?
(Please hide all protected or private information) Please check if all services are running correctly on the computer. Meanwhile, please refer to following article and check if can help you.
Printer
Problem: Active Directory Domain Services is currently unavailable – Why does windows say no printers are installed?
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu -
How to install Small Business Server 2008 in an existing Active Directory domain
It is shown on this page:
http://support.microsoft.com/kb/884453, "How to install Small Business Server 2003 in an existing Active Directory domain".
Is it possible to do this with SBS2008 ?
If "YES", are there any published information about the procedure ?Yes, it is. Thank you very much.
But there is something that confuses me - I want to migrate from Win2003Std to SBS2008. And also, I want to keep the existing Win2003Std as a second DC for a long time.
But it is written in the shown article:
... After the migration is finished, you must remove the Source Server from the network within 21 days. ...
Is this rule mandatory for the scenarios where the Source Server is Std, not SBS ? As I know, I can have more than one DC(Win2003Std/Win2008Std) together with SBS2003. But what about SBS2008 ? -
Hi,
I have successfully setup SharePoint Foundation 2013 as single server farm with SQL Server Standard database in a DMZ environment using local accounts since DMZ doesn't have an Active Directory and hence Domain accounts using powershell as described
in https://theblobfarm.wordpress.com/2012/12/03/installing-sharepoint-2013-without-a-domain-controller
When I run Farm configuration wizard to provision search service application, I get an error:
ERROR: "The service application(s) for the service "Search Service Application" could not be provisioned because of the following error: I/O error occurred."
The log file logged the details of this error as:
ERROR: "Failed to create file share Analytics_e441aa1c-1a8d-4f0a-a079-58b499eb4c50 at D:\SharePoint Search\Office Server\Analytics_e441aa1c-1a8d-4f0a-a079-58b499eb4c50 (System.ArgumentException: The SDDL string contains an invalid sid or a sid
that cannot be translated."
After investigation, I found that potentially the error could be because the timer service is trying to setup a network share for analytics component (as part of provisioning search). It is trying to setup that share with a domain account that happens to
be a local user instead in this case and fails with error “System.ArgumentException: The SDDL string contains an invalid sid or a sid that cannot be translated”.
I got some pointer from the below thread
https://social.technet.microsoft.com/Forums/en-US/c8e93984-f4e5-46da-8e8a-c5c79ea1ff62/error-creating-search-service-application-on-sharepoint-foundation-with-local-account?forum=sharepointadmin
However, the above thread doesn't state that the solution worked.
I have tried creating share manually for Analytics_<Guid> folder but it doesn't work since every time farm configuration wizards is run it creates a new Analytics_<Guid> folder.
Since, I have setup SharePoint Foundation 2013 on a production environment I cannot test and trial various solutions.
Can some please guide me on how to successfully provision search for SharePoint Foundation 2013 setup as a single server farm with SQL Server Standard database in a DMZ environment using local accounts (without Active Directory - domain accounts).
Thanks in advance.
HimanshuMicrosoft documentation doesn't always specifically call out all products (Project Server isn't there, either). But it does apply. You'll need to stand up at least one Domain Controller, or allow port access back to a DC.
Preferably, set up SharePoint on the internal network and use a reverse proxy (which will terminate client connections at the reverse proxy) present in the DMZ.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Maybe you are looking for
-
Error while calling the Web service: GetBprElements
Hi Experts, During integration of ARIS Business Architect for SAP Netweaver with SAP Solution Manager I tried to import the BPR using Transfer Repository option of the earlier. It showed me process completed with error or warning mentioned in the sub
-
How do I open an old Pages document in the new Pages?
A couple of years ago my brother-in-law helped me to remake my resume, and saved it as a pages document. I now need my resume again but cannot open it because the new pages keeps telling me I have to open it in Pages '09 and save it again. I do not
-
Can anybody spot an obvious error?
Hello I would appreciate any help with the following error message I am getting while trying to compile a file. The following shows up in DOS: C:\jdk1.3.1\bin>javac javaPost.java javaPost.java:129: cannot resolve symbol symbol : method newInputStream
-
I need to find out dollar amount on iTunes "Give any amount" gift cards I purchased at CVS, store clerk did not write down the amounts when I purchased.
-
Face Recognition Error - you don't have permission to perform this task
Hi.. I bought my TOSHIBA laptop from Spain, so it would be in Spanish for sure .. When i started the lap for the first time I tested the face recognition and other Toshiba software and they all worked .. but after two days i changed the display langu