DNS configuration for webhosting
Our intention is to use an Xserve as a webhosting platform, but have huge problems in configuring DNS for each domain hosted.
Can someone provide me with a template what I have to provide for a typical domain name at the server admin tools ?
How would I proceed to create sub-domains like test.domain.com and sample.domain.com - creating multiple machines with the same IP doesn't allow me to save them (would need to use different IPs) ?
Also how to set up PTR records ?
Please find an actual entry below (seems not to work correctly (e.g. DNS report tool state "no reverse DNS entries for MX records")):
Settings/General:
Zone transfers allowed
Recursion disabled
Settings/Editing zone/General:
Zone name: domain.com
Server name: www
IP address selected
Name servers:
www.domain.com (pre-set, not editable)
dns1.domain.com
dns2.domain.com
Admin e-mail set; Zone is valid for six hours - changed from 24 to allow faster updates, hope that this does not cause problems, does ?
Settings/Machines:
IP address: Same as before
Name: www
Aliases: domain.com
This machine is a mail server... precedence: 10 (and checkbox marked)
Other fields are empty
Any help is appreciated, because I really hang here and need to get it done quickly over the weekend...
Mac OS X (10.4.8)
Thanks for your quick reply
Apple hasn't fixed a lot of bugs in Server Admin and a lot of the pro users
have basically suggested doing the DNS zones by hand (which you can easily
do)
I noticed this, too. For example when editing a zone and trying to specify name servers, it is a hard job to get the entries in this list. Either they are being removed or not taken over. Such an important service and Apple seems to take care soo less...
Anyway, I have to live with it
You wrote:
First, you'll want to add something like this for each domain you want to
host in your /etc/named.conf:
zone "domain1.com" IN {
file "domain1.com.zone";
type master;
and then create /var/named/domain1.com.zone
which will handle all your cname, A and MX records
When doing so, do the entries appear at the server admin tool and how does it affect the settings there when (mistakenly) using the admin tools to change a record ?
Is there a way to do a "spell check" when I made a modification to named.conf or created one of the *.zone files to ensure that there are no errors in what I wrote ?
Ideally there would be a replacement tool for Apple's server admin tool that manages this task ?
Or does someone know for a web-based tool that provides basic zone file entries when telling some information about the domain ? So something for dummies...
And now few stupid questions for your link to zytrax.com...:
Are the spaces in the sample there spaces or tabs ? And just used for readability or required ?
For example:
IN NS ns1.example.com. ; in the domain
could be written as
IN NS ns1.example.com
I guess that ";" (semicolon) marks the beginning of a comment which can be skipped ?
And what's about the reverse map zone file described at http://www.zytrax.com/books/dns/ch6/reverse-map.html ? Can these entries made in the *.zone file also ?
I guess I do need these files and entries at named.conf only at the Xserve that should act as primary one and specify the secondary zones at the server tools at the second server ? The primary DNS Xserve would have zone transfers enabled, of course.
Similar Messages
-
DNS configuration for webhosting - follow-up question
In regard to my previous inquiry I want to add another question affiliated with that.
We want to use our own DNS servers for domain registration. For this purpose, I need two DNS servers - ns1.domain.com and ns2.domain.com.
domain.com is a domain owned by us that should get also managed at the Xserve's DNS service.
For that reason I would need to add two sub-domain records to the DNS entry for the zone domain.com, wouldn't ?
But how do I achieve this ?
When trying to add another "machine" (comparable to "CNAME" ?), server admin requires me to use a different IP address (it won't let me save two machines for one zone with the same IP; see my previous inquiry, I created a machine for "www"). And I see no other way to do this (therefore it also seems not to be possible to create a sub-domain like meat.domain.com).
Maybe someone can direct me to the right solution.
It appears to me that Apple uses different terminology in their DNS system; at least although I'm a bit experienced with DNS, I totally hang here.
I look forward your assistance
Mac OS X (10.4.8)Hi there,
Have you seen or thought about using Tenon iTools?
http://www.tenon.com/products/itools-osx/
Seems like the way to go for virtual hosting on a mac.
Aloha,
Tony -
DNS configuration for web access
Hi All,
I'm setting up a SL server for the first time and it's working great for users inside our building and on our network, but we're unable to access anything on it through the web (including a basic homepage) and I think it has to do with our DNS setup. We've got the domain tgroupproductions.com through goDaddy and I've set up the ns1 and ns2 info in the host summary pointing to my public ip 216.3.118.152 and added both ns1.tgroupproductions.com and ns2.tgroupproductions.com to the goDaddy nameserv list.
I've attached images of my dns configuration and of the intodns.com scan results. I just want to double check to make sure I'm setup correctly. It's possible I just haven't waited long enough for the changes to take effect
DNS Setting: https://files.me.com...ek.klein/mp3enf
Intodns.com: https://files.me.com...ek.klein/d33nltSorry about the images...don't know why they are working. I'll embed them at the bottom of this post.
As for why I'm not using GoDaddy...I have no problem using them as a public dns (meaning I'd have to change the nameservs back to the ns17.domaincontrol.com and ns18 nameservs?) but the site wasn't functioning with those in place so we tried to set up our own internal dns. I had followed a tutorial at http://osx411.com/index.php?/topic/19-using-mac-os-x-server-to-host-websites-fro m-home/ but either I'm misunderstanding or I missed something.
Here are the images:
Message was edited by: fkick1 -
Hi,
I am newbee to GSS. I would like to deploy the GSS in my datacenter.
I would like to know the DNS configuration example for domain.
ex:
www.abc.com
What records need to configured with detail script. beacause i dont have experience in DNS server configuration.
I am looking for positive update.
Regards
sateesh kumar.k
iTypical flow is as follows
1. Client will hit their DNS servers (configured on their machines as primary/backup dns server).
2. "Client's DNS server" will query "DNS server authoritative for abc.com" for www.abc.com.
3. "DNS server authoritative for abc.com" will ask "client's DNS server" to query "GSS - Authoritative for www.abc.com"
4. "Client's DNS server" will query GSS for www.abc.com.
5. GSS will send the ip add of www.abc.com (which should be configured on ACE as VIP).
6. "Client's DNS server" will handover this VIP to client
7. Client will hit the VIP configured on ACE (for application www.abc.com).
Syed iftekhar Ahmed -
DNS Configuration for Exchange 2013
I have a stand alone server 2012 with AD, DHCP, DNS and Exchange on it and started getting DDoS attacks
I installed a firewall had to change the subnet of the server from 10.0.0.0/24 to 192.168.1.0/24 and after re-configuring the Servers IP, DHCP and DNS found that I had no incoming email. (invalid Security Certificate)
I found that mail traffic was directed to the Router instead of Exchange and being rejected with the routers security certificate. I have since fiddled with the DNS so many times I don't know what is right and wrong
Anyone have any ideas where I have gone wrong what is in the tables that shouldn't be there and what is missing.
email address is user.mail.domain.com
Geotrust SSL Security Certificate is mail.domain.com autodiscover.domain.com server01.domain.com
**Forward lookup for domain.com
Same as parent SOA
[28]server01.domain.com, hostmaster.domain.com
Same as parent NS
server01.domain.com
Same as parent NS
ns1.domain.com
Same as parent NS
ns2.domain.com
Same as parent MX
[10]mail.domain.com
Same as parent MX
[20]mail.domain.com
server01 MX [10]mail.domain.com
Same as parent HostA
192.168.1.10
Same as parent HostA
139.130.XXX.YYY
server01 HostA
192.168.1.10
mail HostA 192.168.1.10
mail HostA 139.130.XXX.YYY
localhost HostA
127.0.0.0
Properties SOA ns1.domain.com 139.130.XXX.YYY
ns2.domain.com 139.130.XXX.YYY
server01.domain.com 192.168.1.10
**Forward lookup for mail.domain.com
Same as parent SOA
[1]server01.domain.com, hostmaster.domain.com
Same as parent NS
server01.domain.com
Same as parent HostA
192.168.1.10
Same as parent HostA
139.130.XXX.YYY
Properties of SOA server01.domain.com
192.168.1.10
**Reverse Lookup
1.168.192.in-addr.arpa
Same as parent SOA
[1]server01.domain.com, hostmaster.domain.com
Same as parent NS
server01.domain.com
Same as parent NS
ns1.domain.com
192.168.1.10 PTR
domain.com
192.168.1.10 PTR
mail.domain.com
OWA and Outlook 2013 work incoming and outgoing from within the subnet, both internal emails and external emails
But users off site can't log in to outlook 2013 and get blocked with OWA by invalid security certificate.
**Testconnectivity.microsoft.com results
autodiscover failed
resolved host domain.com successful with both correct IP addresses returned
Port 443 open
SSL Certificate incorrect it is the routers Certificate not the Geotrust certificate.
**This is the real issue, and I can't figure out why
Thanks AlanThanks Luke
Yes you are right , I get alternate WAN and LAN Ip addresses when I flushdns
I suspected I had additional entries ans/or wrong entries in the DNS Zones
i reformatted to show up in columns in the post
I hope you can point out which are wrong
**Forward lookup for domain.com
Same as parent----- SOA----[28]server01.domain.com, hostmaster.domain.com
Same as parent----- NS -----server01.domain.com
Same as parent----- NS -----ns1.domain.com
Same as parent----- NS -----ns2.domain.com
Same as parent----- MX -----[10]mail.domain.com
Same as parent----- MX -----[20]mail.domain.com
server01-------------- MX----- [10]mail.domain.com
Same as parent----- HostA --192.168.1.10
Same as parent----- HostA --139.130.XXX.YYY
server01-------------- HostA --192.168.1.10
mail --------------------HostA-- 192.168.1.10
mail --------------------HostA-- 139.130.XXX.YYY
localhost-------------- HostA --127.0.0.0
Properties SOA --ns1.domain.com 139.130.XXX.YYY
----------------------ns2.domain.com 139.130.XXX.YYY
----------------------server01.domain.com 192.168.1.10
**Forward lookup for mail.domain.com
Same as parent----- SOA------[1]server01.domain.com, hostmaster.domain.com
Same as parent----- NS--------server01.domain.com
Same as parent -----HostA---192.168.1.10
Same as parent -----HostA---139.130.XXX.YYY
Properties of SOA server01.domain.com
192.168.1.10
**Reverse Lookup
1.168.192.in-addr.arpa
Same as parent----- SOA-----[1]server01.domain.com, hostmaster.domain.com
Same as parent----- NS-------server01.domain.com
Same as parent----- NS-------ns1.domain.com
192.168.1.10-------- PTR------domain.com
192.168.1.10-------- PTR------mail.domain.com
do I need an autodiscover record?
I setup 2 forward lookup zones domain.com and mail.domain.com
From memory the mail.domain.com was for external access but I don't think that was how it turned out
Thanks -
DNS configuration in two-domain forests
hi all,
We have a forest with two separate domains.First of all we had domain A. When we added the first domain controller for the second domain (B), a trust relationship was established and look fine. but then we realised DNS configuration was not nice and
some replication issues came out.
What we have done is setting up domain B zone as a secondary Zone in domain A, and viceversa.
We configured primary zones to be able to be transferred to the Domain controllers in the other domain and also configured notifications.
Even with this configuration, some times we check zones and find it empty but a single.
Does anyone one if our configuration is the right one for our infrastructure? I have been loking in the internet for a manual or a document regarding DNS configuration for this infrastructure, but I could not find it, Do you know of any manual or document?
Thank you very much
kind regards.
David.Hi David,
First, make sure that the TCP and UDP port 53 is not blocked. To verify it a port is blocked, please use the portqry.
To download portqry, please click the link below,
PortQryUI - User Interface for the PortQry Command Line Port Scanner
http://www.microsoft.com/en-hk/download/details.aspx?id=24009
If the port is not blocked, please check the serial number of the zone in both of the primary and secondary server.
If serial number is the same at both the source and destination servers, no zone transfer occurs between the servers.
To resolve this issue, please follow the steps blow,
After you increase the serial number at the master server to a higher value than is used currently at the secondary server, initiate zone transfer at the secondary server.
Increase the value of the serial number for the zone at the master server (source) to a number greater than the value at the applicable secondary server (destination).
Here is an article about how to troubleshoot zone issues, it may be helpful.
http://technet.microsoft.com/en-us/library/cc731210.aspx
Besides, instead of creating scondary zone, we can add conditional forwarder on the DNS server.
To add conditional forwarder, please refer to the link below,
http://technet.microsoft.com/en-us/library/cc794735(v=WS.10).aspx
Best Regards.
Steven Lee
TechNet Community Support -
Running DNS service for SCAN in the openfiler VM
Grid version : 11.2.0.3
Guest OS : Oracle Enterprise Linux 6.3
Host OS : Windows 7 (64-bit ) with 16gb Physical RAM
Hypervisor : Virtual Box 4.2.6
Openfiler version : 2.99
Using virtualBox, I am setting up a 2-node RAC node on Oracle Linux.
I have a 3rd VM which runs openfiler ( NAS )
For using SCAN feauture, I would like to run a DNS service as mentioned in the article below
http://www.oracle-base.com/articles/linux/dns-configuration-for-scan.php
I don't want to run the DNS service in any of the two RAC nodes. Instead of creating a separate VM just for the DNS , I am thinking of running it in the Openfiler VM.
Openfiler is running in a Linux Distro called rPath. I am not sure if the packages mentioned in the above oracle-base.com article is available in this distro. Has anyone run a similair DNS service in the Openfiler OS ?I doubt it. OpenFiler is a "stripped-down" OS.
But Wait ! A Google search returned this : http://www.denbraber.org/?p=4
Hemant K Chitale
Edited by: Hemant K Chitale on Apr 22, 2013 5:10 PM -
Proper Configuration of DNS server for our new branch office
Hi All,
Our new office will setup a new branch office with a routed network link to our HO. In HO, we have 2 domain controllers configured as AD and DNS just for fail over scenarios.
How will we configure the DNS server of our 3rd domain controller which we will placed in the new branch office. What would be the proper settings of DNS server integrated to AD to work well especially to have a successful replication and communication to
the 2 DC's located in HO?Hi,
If you have multiple DC's in that site i would recommend using any of the partner DC's IP addresses as preferred one and secondary DNS IP to pointing to itself. Dont use loopback addresses configure it with actual IP addresses.
If you have only one server in branch office point itself as the primary DNS and HO DC as secondary and tertiary.
Make sure that all clients in your branch site are pointing to the branch DC as primary DNS server.
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing! -
Hi,
This is my first post here.
My exchange server of late is facing a peculiar problem. I get the error message that I have posted below when sending mails to any outside domain. However when I restart the server the mails can be resend to the address without any issue. After a certain
time again the issue pops up upon which I am forced to restart the server again. I am running 2007 Exchange on Windows 2003.
Generating server: name.mydomain.com
[email protected]
#554 5.4.4 SMTPSEND.DNS.MxLoopback; DNS records for this domain are configured in a loop ##
[email protected]
#554 5.4.4 SMTPSEND.DNS.MxLoopback; DNS records for this domain are configured in a loop ##
Original message headers:
Received: from name.mydomain.com ([1xx.xxx.xxx.xx5]) by MHDMAILS.mouwasat.com
([1xx.xxx.xxx.xx5]) with mapi; Wed, 19 Oct 2011 08:56:29 +0300
From: <[email protected]>
To: <[email protected]>
CC: "Al Alami,Tareq" <[email protected]>
Date: Wed, 19 Oct 2011 08:56:27 +0300
Subject: RE:
Thread-Topic:
Thread-Index: AcyAQ5tu8z9CvBfdT5+1pcGQkk6x0AIuwczAAAGZjeABQyW5sAADeeJQAAETNDA=
Message-ID: <[email protected]>
References: <[email protected]com>
<[email protected]com>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator:
acceptlanguage: en-US
Content-Type: multipart/related;
boundary="_004_EEC8FA6B3B286A4E90D709FECDF51AA06C0588CA11namedomain_";
type="multipart/alternative"
MIME-Version: 1.0On Sun, 23 Oct 2011 15:05:15 +0000, Jobin Jacob wrote:
>
>
>Even af
>
>ter removing my domain from the send connector I continue to receive the error. I would like to say I do have a firewall, Cyberoam. However, it was the same configuration till now in the firewall. I did try Mx lookup and found the following.
>
>Could there be any other solution to this issue ?
Sure, but it's necessary to ask a lot of questions since none of us
know how your organization is set up.
I see you also have "Use the External DNS Lookup settings on the
transport server" box checked. How have you configured the "External
DNS Lookups" on the HT server's property page? Is there any good
reason why you aren't just using your internal DNS servers? If the
internal DNS servers are configured to resolve (or forward) queries
for "external" domains then there's no reason to use that checkbox. In
most cases checking that box is a mistake.
http://technet.microsoft.com/en-us/library/aa997166(EXCHG.80).aspx
The behavior you describe (it works for a while and then fails;
restarting the server returns it to a working state) sure sounds like
some sort of DNS problem.
Rich Matheisen
MCSE+I, Exchange MVP
--- Rich Matheisen MCSE+I, Exchange MVP -
Support for IPv6 Router Advertisement Option for DNS Configuration RFC 5006
Hi everyone, do you know that whether Cisco routers support “IPv6 Router Advertisement Option for DNS Configuration RFC 5006” currently, is there any roadmap for this support? Thanks for your help!
No, this is not currently supported, and the last I heard, there is no roadmap for this until it becomes a standard (as opposed to being experimental).
-
I need help with proper DNS setup for 10.5.8 Server
I'm administering a 10.5.8 server that I sold and setup about a year ago. I'm experiencing issues with getting iCal server to be happy. All of the clients are running 10.5.8, but I'm running 10.6.1. I've heard from others that connecting iCal in 10.6 to a 10.5 iCal Server should be no problem.
I'm beginning to think that I have DNS issues. Probably because I'm not and never have been 100% certain how to set it up completely correctly. I used to be able to get Kerberos tickets, but now I can't. With the new "Ticket Viewer" in 10.6, it asks for two bits of information. First is "Identity" where I'm guessing I should put [email protected] and then password. When I do this I get an alert dialog that says "Kerberos Error -- cannot resolve network address for KDC in realm example.com"
The server is a Mac Pro tower with two Ethernet ports. En2 is connected directly to the Internet and has a static IP with a domain name assigned to it. We'll call it "example.com" for the purposes of the discussion. The En1 is connected to the network switch and has a static LAN IP of 192.168.1.250. All clients inside and outside are able to reach the server via domain name for WWW & AFP, no problem.
nslookup on the static IP address returns "example.com" and nslookup on "example.com" returns the correct static IP address. Open Directory is running and happy including Kerberos. The LDAP search base is "dc=example,dc=com". The LDAP search base is a concept I haven't quite grasped, so I'm just going to assume it's correct.
The domain name is hosted outside by a service provider that forwards all "example.com" requests to the server with the exception of mail.
In DNS, I have three "sections" that look like this:
Name Type Value
1.168.192.in-addr.arpa. Reverse Zone -
192.168.1.250 Reverse Mapping example.com.
000.000.00.in-addr.arpa. Reverse Zone -
000.000.000.000 Reverse Mapping example.com.
com. Primary Zone -
mail.example.com. Alias mail.our-email-isp.com.
example.com. Machine Multiple values
www.example.com. Machine Multiple values
NOTE: the zeros aren't actually zeros, they are the static IP assigned to the server/domain
When I select the top element "1.168.192.in-addr.arpa." down below "Allows zone transfer" is NOT checked. Nameservers shows the zone as "1.168.192.in-addr.arpa." and the Nameserver Hostname as "ns.example.com."
When I select the next line down "192.168.1.250", Resolve 192.168.1.250 to: example.com.
When I select the "000.000.00.in-addr.arpa." element, it has the same settings -- nameservers "000.000.00.in-addr.arpa." and "ns.example.com."
When I select the next line down (our static IP), Resolve 000.000.000.000 to: example.com.
When I select "com." the admin email is populated with a valid email address, Allows zone transfer is NOT checked. In nameservers, Zone is "com." and Nameserver Hostname is "example.com." The mail exchangers are mail2.our-email-isp.com. priority 10 and mail.our-email-isp.com. and priority 20.
When I select the machine "example.com." it shows both the real-world static IP and the 192.168.1.250, same with "www.example.com.".
Am I doing something wrong with this setup? Should "com." be the primary zone or should that be "example.com." ???
I've been thinking about getting rid of the DNS entry for the 192.168.1.250 address altogether, but will the clients in the office suffer performance issues??? I do not think that the client workstations are configured to get DNS from the server anyway. Should the "www.example.com." record be a Machine record or should it be an alias record?
Any help you have to offer is greatly appreciated! Thanks!
In the meantime, I'm going to look around and see if I can understand "Allows zone transfer" and LDAP Search base a bit better.Okay, I found a lovely article at the following address which I think helps me to clarify what I'm doing wrong. Despite that, I'd still like to have any feedback you have to offer.
http://www.makemacwork.com/configure-internal-dns-1.htm
Also, when editing DNS entries, Server Admin likes to set the nameserver to "ns." -- whatever your domain is. Should I be overriding that and if so, replace it with what? -
Hi All
This may be a silly question so please forgive me, I haven't set-up a DNS in a while and I know I have forgotten something simple in my configuration.
I have set up an Xserver 10.5.6 with a fully qualified domain name for example:
mydomain.com
machine name: ho.mydomain.com
For some reason I am unable to access the external hosted web site without www (https://mydomain.com) on the internal network.
From out side I can access the external hosted site with or without www, so my external hosting configuration is correct.
What simple thing have i missed in DNS configuration my configuration?
Primary Domain:
mydomain.com
www. machine (external ip address of web host)
ho machine (server ip address)
Please help, what have I forgotten to do?Hi,
I think you want to replace
www. machine (external ip address of web host)
with
A record mydomain.com -> external IP
This sends an external request outside and comes back in;
that way you can reach either www.mydomain.com or mydomain.com
Ensure you have an alias record in the website setup for the www.
HTH,
Harry -
I have a domain name(domain.com) DNS hosted at my ISP. I also have 3 sub domains DNS hosted at the same ISP pointing to various external ip addresses (mail.domain.com, vpn.domain.com and ts.domain.com). We want to set up sales.domain.com to point to an
internal 10. IP address. We have AD integrated DNS servers for our 2003 AD domain. The AD domain name is totally different than the hosted domain name in question. I currently edit the host file for a couple of PC's but this isnt practical company wide so
I want to add entries on our internal AD DNS servers to resolve the locally hosted site. If i recall, someone once told me that you cannot just put an A record for one sub domain, I would have to have entries on my 2003 DNS server to resolve anything related
to the domain.com name. Is this accurate? If so, what is the proper way to configure my 2003 AD DNS server to resolve anything domain.com related for my internal users while still allowing my ISP to do the DNS lookup for the internet.On my 2003 AD integrated DNS server...i rightclick forward lookup zone and choose...new zone..primary zone (store zone in AD checkbox checked)..i chose to all DNS servers in the AD domain for replication...zone name sales.domain.com....allow secure updates
option....then i added an A record in that zone...sales.domain.com..pointed that towards my internal 10. IP address...is this correct? It seems to be working correctly for the sales.domain.com DNS record...and i tested the other sub domains...and those look
like they are going to my ISP for DNS resolution...
Is this the correct procedure? I did this on a test AD domain and not my production...i want to make sure i dont break everything under the domain.com by incorrectly adding 1 sub domain.. -
Mail server and DNS configuration
I have an XServe G4 running Mac OS X 10.4 Tiger Server, and I have successfully configured two domains that I purchased from GoDaddy as websites on this XServe. It's behind an Airport Extreme, and I have forwarded a bunch of ports in order to enable FTP, SSH, Web, remote Server Administration, webmail, and I have also forwarded the IMAP and SMTP ports. All of these services work except for email, so I am wondering if there is any special DNS settings that I need to configure in the GoDaddy total dns configuration page. I have the MX record pointed directly to my IP, just like the A record. I also have mail.mydomain.com pointed to the A record's IP (maybe I described that poorly, but I hope it gets the point across). I am able to log into webmail and send email out to other people, but when I try replying back to the email which I sent from webmail, I get a bounced message. I also cannot configure a Mail client, but I think I need to get the accounts at least working first. Can someone provide a list of DNS requirements or server configuration requirements for me to check off in order to make this happen? Does anyone know of any great resources to learn this kind of stuff? I'm kinda new to the server thing.
Thanks!
Paulpostconf -n results:
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
html_directory = no
inet_interfaces = localhost
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mydestination = $myhostname,localhost.$mydomain,localhost,rubenkalath.com
mydomain = rubenkalath.com
mydomain_fallback = localhost
myhostname = mail.rubenkalath.com
mynetworks = 127.0.0.0/8
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdtls_certfile = /etc/certificates/Default.crt
smtpdtls_keyfile = /etc/certificates/Default.key
smtpdusetls = no
unknownlocal_recipient_rejectcode = 550
virtualmailboxdomains = hash:/etc/postfix/virtual_domains
virtual_transport = lmtp:unix:/var/imap/socket/lmtp
ps U _postfix results:
ps: _postfix: no such user
tail -20 /var/log/mail.log results:
May 15 15:55:27 sincity postfix/cleanup[1257]: 765DC4517A: message-id=<[email protected]>
May 15 15:55:27 sincity postfix/qmgr[1239]: 765DC4517A: from=<[email protected]>, size=881, nrcpt=1 (queue active)
May 15 15:55:27 sincity postfix/smtpd[1254]: disconnect from localhost[127.0.0.1]
May 15 15:55:27 sincity postfix/pipe[1259]: 765DC4517A: to=<[email protected]>, relay=cyrus, delay=0, status=sent (mail.rubenkalath.com)
May 15 15:55:27 sincity postfix/qmgr[1239]: 765DC4517A: removed
May 15 15:58:09 sincity postfix/smtpd[1338]: connect from localhost[127.0.0.1]
May 15 15:58:13 sincity postfix/smtpd[1338]: lost connection after CONNECT from localhost[127.0.0.1]
May 15 15:58:13 sincity postfix/smtpd[1338]: disconnect from localhost[127.0.0.1]
May 15 16:06:09 sincity postfix/postfix-script: refreshing the Postfix mail system
May 15 16:06:09 sincity postfix/master[590]: reload configuration
May 15 16:12:48 sincity postfix/smtpd[1709]: connect from localhost[127.0.0.1]
May 15 16:12:54 sincity postfix/smtpd[1709]: lost connection after CONNECT from localhost[127.0.0.1]
May 15 16:12:54 sincity postfix/smtpd[1709]: disconnect from localhost[127.0.0.1]
May 15 16:28:58 sincity postfix/smtpd[2068]: connect from localhost[127.0.0.1]
May 15 16:28:58 sincity postfix/smtpd[2068]: 1FA354537C: client=localhost[127.0.0.1]
May 15 16:28:58 sincity postfix/cleanup[2071]: 1FA354537C: message-id=<[email protected]>
May 15 16:28:58 sincity postfix/qmgr[1530]: 1FA354537C: from=<[email protected]>, size=776, nrcpt=1 (queue active)
May 15 16:28:58 sincity postfix/smtpd[2068]: disconnect from localhost[127.0.0.1]
May 15 16:29:02 sincity postfix/smtp[2072]: 1FA354537C: to=<[email protected]>, relay=mercury.gatech.edu[130.207.192.26], delay=4, status=sent (250 Ok: queued as 67542CDF86) -
DNS entry for DC not dynamically updating (Server 2008 R2)
Windows Server 2008 R2. I've got a single DC (I'm preparing to install the 2nd in the next few days). The host (A) record for the DC shows to be static for some reason. I changed the name of the DC recently, then brought down the Exchange server and rebooted
and it successfully connected again. I might have entered in a static DNS entry for the new server name before renaming the server, but I'm not sure.
I've tried to delete the static DNS record for the DC and then reload, but it continues to appear as a static entry. The mail server's DNS record still appears as a dynamic entry.
What am I doing wrong?
Noel Stanford Oveson
jeremyNLSO
MCTS, MCITP, CCENT, CNE, MCSE, CLSE
Berlin, GermanyHello,
Like Mike suggested, it is normal that it is a static record.
However, if your DC with its new name is not updating its DNS record, check that "Register this connection' addresses in DNS" is checked on the DC's adapter and then run
ipconfig /registerdns using an elevated prompt.
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft
Certified Professional
Microsoft
Certified Systems Administrator: Security
Microsoft
Certified Systems Engineer: Security
Microsoft
Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows 7, Configuring
Microsoft
Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
Microsoft Certified IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer
Maybe you are looking for
-
Error in invoking target 'nnfgt.o'
Dear Experts, I'm upgrading my Oracle patch set 10.2.0.4 to 10.2.0.5. but while installing the patch set I'm getting the following error "NFO: Internal Error: Codeword file /opt/aCC/newconfig/aCC.cwd,/opt/aCC/newconfig/ansic.cwd missing or empty. INF
-
Why aren't my songs previously accessible on my I/Pad 2/iPhone 4s devices in "Music" appearing in faint print & graphics no longer accessible? I had downloaded them into iTunes on my PC and previously synced them. Suddenly after recent syncing they
-
Safari 8.02 Unexpected annoying unwanted popup pages
Using Safari 8.02 with Yosemite, this bug happens sytematicly each time I click on a page on screen. Every time, in order to get the expected url, I receive an Unexpected annoying and unwanted page, looking like malware or advertising unvolving a qui
-
HT1848 Transferred all games apps from ipad to computer but the apps won't open
All games on computer but cannot open to play especially the one purchased from itunes
-
Hi everybody. I am facing the following problem. I execute the transaction 1ke0 to transfer plan data from CO to PCA. Test run shows the correct data, but when I executed it in production, the data were wrong. The transction ran for four different pl