DNS different for internet and both iTunes

Trying to troubleshoot internet connectivity problems with Chrome, Firefox and Safari.
1. Is DNS for Internet the same for iTunes and App Store?
2. What would cause all 3 browsers to not find any website (google, yahoo)

In the server zone files, the dedicated IP address should point to the machine name, as in name.someserver.com. The local IP address should point to name.local. If you have more than one domain name, the zone files should show their network IP address, not the dedicated IP address, which should only point to the machine name.
As a side note, I strongly advise against connecting a server directly to the Internet. It should be behind a router with DMZ/NAT/firewall capabilities. By the time you realize why, it will be too late.

Similar Messages

  • Use airport for internet and ethernet for local?

    Hi. Ive searched around and cant find an answer for this.
    I have a 27" imac connected to my router and all works fine for accessing the internet.
    I have several other devices close by that I want to connect via ethernet. If i connect the imac to another router via ethernet I can browse my local devices but loose internet connectivity. It is as if the imac will suspend the airport connection while the ethernet cable is connected. I don't want my second router to act as a bridge as it doesn't support N speeds.
    Essentially, I want the imac to use airport for internet and the ethernet port for local files.... The only workaround I have is to unplug the ethernet cable from the back of the imac when i want to use the internet. I'm hoping it's just a DNS issue, but cant seem to resolve it.
    I do not need internet connectivity for the other devices and don't see how i can do that without enabling the wireless side of my second router and then creating a bridge...
    Any suggestions?

    It is as if the imac will suspend the airport connection while the ethernet cable is connected.
    The Connection Order on your iMac is set so that if both AirPort and Ethernet are "on", the iMac will give priority to the Ethernet connection.
    If you want to configure your iMac so that it gives priority to an AirPort connection if both AirPort and Ethernet are "on", give this a try:
    Open System Preferences (gear icon on the dock) and open Network
    Click on the small gear icon at the bottom of the connection list on the left
    Click on Set Service Order and drag AirPort to the top of the connection order list
    Click OK, then click Apply
    Now, if both AirPort and Ethernet are active, your iMac will give priority to the AirPort connection. If you want to connect using Ethernet, you will have to turn AirPort off by clicking the fan shaped AirPort icon at the top of your computer screen.

  • Hy won't my ipod touch 5G connect to my computer or itunes? I've tried new USB cables, different USB ports and uninstalling itunes and reinstalling.

    Why won't my ipod touch 5G connect to my computer or itunes? I've tried new USB cables, different USB ports and uninstalling itunes and reinstalling.

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • I just downloaded the latest version of itunes for Windows and now itunes crashes every time i launch it

    I just downloaded the latest version of iTunes for Windows and now iTunes crashes everytime I launch it.  I have tried re-downloading and selecting Repair with no luck.  Any suggestions?
    thanks

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • Can i use cdma for internet and gsm for phone at a time in Iphone4s?

    Can i use cdma for internet and gsm for phone at a time in Iphone4s?

    No. Phones sold by GSM carriers can't access CDMA at all and phones sold by CDMA carriers can only access GSM if they are a) unlocked and b) in an area where there is not CDMA.
    Best of luck.

  • TS1702 my ipod & itunes are fully up-to-date with 4.2.1 for ipod and the itunes 11.0.1 and every app (ex facebook & ice cream jump says i need 4.3 version but when i click all updates say its all up to date. I have tryed restoring it 4 times to factory as

    my ipod & itunes are fully up-to-date with 4.2.1 for ipod and the itunes 11.0.1 and every app (ex facebook & ice cream jump says i need 4.3 version but when i click all updates say its all up to date. I have tryed restoring it 4 times to factory as well. Please help I have set-up over 10 ipods and differents generations and have never had this issue like this, I even have all ratings ristriction unchecked and payment info in itunes so i need help please

    but i could download on others ipods in same gen, facebook and ice cream tower, everything i look up and try install always says that for apps so your saying that i can not ever download any apps to this ipod ever againÉ

  • I bought  my MacBook Pro in 2010. This is the first Mac I have owned and recently it is having some difficulty loading we pages, often timing out. This Mac environment is entirely different for me and I am not sure where to begin troubleshooting/clean-up.

    I bought  my MacBook Pro in 2010. This is the first Mac I have owned and recently it is having some difficulty loading we pages, often timing out. This Mac environment is entirely different for me and I am not sure where to begin troubleshooting and/ or clean-up. I have moderate computer skills and try not to download or access questionable material, however recently I visited the Ap Store and purchased a couple of different aps to use in record keeping and for making a flyer. I am not even sure how to remove these programs to see if it helps.
    Any tips or tricks are appreciated.
    Thank you!

    Time to see about the PRAM battery.
    By the way iOS and OS X are different systems.
    iOS is the operating system for iPads, iPhones, and iPod touch.
    Mac OS X is the operating system for Mac labelled computers.

  • Why is the Amber update different for ATT and Chin...

    Why is the Amber update different for ATT and China? For Lumia 520, it could tap to unlock but, in china, this function is disappeared disappear. Could you give an expain as the matching hardware, otherwise I think it's a definately discriminatory to Chinese.

    Double tap to unlock is not available for any 520, anywhere in the world. See link below. You should always check first before making allegations. 
    http://discussions.nokia.com/t5/Nokia-Lumia/quot-Missing-quot-new-features-in-Amber/td-p/2061872

  • USB sync cable different for CDMA and GSM version phones?

    I recently ordered a USB sync cable for Iphone 4S from ebay. I want to know whether the USB sync cable for Iphone 4S is different for CDMA and GSM version phones? And if they are then what are the likely consequences if they are interchanged and used inadvertantly.

    All recent iDevices use the same type of connector/cable.
    Stedman

  • Can someone hack into my MacBook Pro even it's not connected to the internet and both Wi-fi and Bluetooth services are off?

    Hi,
    Need to know if someone can hack into my MacBook Pro even if it's not connected to the internet and both Wi-fi and Bluetooth services are off? Can someone enter my system even if the settings at System Preferences > Sharing are all off?

    Jose Alessandro wrote:
    Need to know if someone can hack into my MacBook Pro even if it's not connected to the internet and both Wi-fi and Bluetooth services are off? Can someone enter my system even if the settings at System Preferences > Sharing are all off?
    Yes,
    Through Bonjour, Apple's open source zero configuration networking.
    https://developer.apple.com/bonjour/
    http://flylib.com/books/en/2.434.1.105/1/
    And you can't turn it off or your computer won't work, however saving grace is the hacker has to be pretty close to your machine to do it.

  • HT1923 I cannot uninstall apple mobile device support.  I am following the instructions for removing and reinstalling itunes but now stuck.  Please help.

    I am following the instructions for removing and reinstalling itunes because I had a "msvcr80.dll missing from your computer" error.  I have uninstalled itunes and apple software update but the next one in order "apple mobile device support" will not uninstall.  According to the instructions, that one has to be removed before I can do the rest.  Would love any help I can get.

    Hello and thanks so much for your quick reply. I am at a standstill, because I have done those things already and it has not worked. The repair install procedure seemed to take place quickly, but the same thing happened again when I tried to uninstall it the program after that.... It seems to proceed, then the progress bar goes backward, and there it still is!
    When I downloaded the Microsoft Fixit program and asked it to uninstall the Apple Mobile device Support, it started but then got stuck and I had to shut my computer off, as it froze everything up!
    I'm hoping you can help..... This seems to be a problem with the new version, and it's frustrating, because I can't use Itunes on my computer at all till we find a solution.
    Perhaps if I try to restore my computer to before the Itunes 11.1.4 uodate?
    Thanks so much for your help,
    Shirley 261

  • I don't know why whenever i choose " check for updates " and download itunes 11.1 , it never shows any downloads , and i need itunes 11.1 so i can restore my iphone again .. help please

    I don't know why whenever i choose " check for updates " and download itunes 11.1 on my desktop , it never shows any downloads .. even when i tried downloading it from the website, and i need itunes 11.1 so i can restore my iphone again .. help please

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Amount posted different for Invoice and Credit memo

    Hi Experts,
    The user has reversed only one line item of an invoice entry (RE), which was processed back in 2009. The invoice entry was processed with two Gl Accounts( Transit Comm.match and Com.Inv.GIT d.d) with amount allocated as 576.35 (5399.2 and -4822.85)with an input tax of 22%.But in the reversal entry the amount allocated to these account are different(-5851.62 and 5275.27), thought the total match to -576.35. Interesting thing is this entry was posted in a foreign currency (EUR) wherein the Local Currency values which is in PLN is same for both invoice and reversal entries. Exchange rate for both the entries are  4.20430.
    Please let me know your thoughts..

    Hi Ravi,
    Here by reversal I meant the credit memo processed against invoice.

  • Battery Care and Cable for Internet and Keychain  :-)

    I commend you people for helping out, so thanks!
    I have a used sMBP I recently purchased. I noticed that the battery cannot be removed easily like the old MBP I had. Does Apple still recommend letting the battery go all the way down and right before it goes into safe mode, hook it up to power, let it fully charge and try to keep the charge around 60-70% charged? Should I do this "drain and charge to full capacity" once a month? Any reason when I initially hook it up to the white adapter, it does NOT say "charging," but it says" Not Charging." Somebody told me to reset the SMC controller (I think that is the right name) but the person gave me instructions for an older MBP, because what he told me to do did not make any sense
    As far as hooking up the MacBook Pro to a wall internet connection should I use this type of ethernet cable or does it not matter? (The ethernet cable that came with the MBP is really loose at the MBP ethernet connection.) "Belkin RJ45 CAT 5e Ethernet Patch Cable (14 Ft.)" If not, any suggestions on the latest recommendation for an ethernet cable? Are there any ethernet internet plugs that take a firewire cable? I know sounds pretty stupid, but I thought I would ask.
    Finally, why when I empty the cache n Safari 5.0.4 do some of my usernames and passwords get erased? I thought that would only happen if I "Reset Safari?" If I loose the passwords, are they stored in keychain if I have used them in the past?
    thanks

    Maybe I'm lucky. But here's my experience.
    With the Lumia 800, battery life was poor initially but after a couple of days it impoved, and again too with software updates.
    920 now I've had for two weeks and it is the only device I use. Habit I had with all my phones for last couple of years, is to have them charging overnight, with alarms set and in main profile for calls (text on silent). Same still with 800 and 920. Though both happily went through the night if I didn't plug them in.
    920 originally battery wasn't great, but improved daily after about 3-4 days. This morning I took it off charge at 07:00, and it's still going strong at 21:30. Been on wi-fi, 3g, phone calls & texts in/out, podcast update check download and playing, email and calendars syncing. A fair amount of speech to text for calling and sms. Whatsapp, NFC and Bluetooth on all day. Screen brightness on 'high', Timeout at 3 mins. Much use of Facebook. Twitter, internet browsing, email, Bluetooth transfer, NFC writing and reading. Taken a couple of photo's and videoes, some Youtube viewing, and about half hour of games. Cloud Backup for text messages 'On', transferred photo's to skydrive and downloaded OneNote while away from wifi. Used several apps a few times throughout the day on wifi and/or 3g. Been on the Store.
    Battery says 18% and 12 hours remaining. I think time remaining is somewhat misleading (as it's based on recent usage I suspect), but the percentage seems reasonably accurate, having checked it throughout the day.  I plan to keep using it tonight for setting up more items on Nokia Reading, listening to music, some sms stuff, along with Facebook and Twitter mainly and will see when it dies.

  • RPT_MOPZ_COPY_STACK_XML shows SC version differs for JAVA and DUAL-Stack xml files

    Hi All,
    I am using the report/program RPT_MOPZ_COPY_STACK_XML to copy the stack xml file I used from a previous upgraded system. Systems are identical. However, report shows below..
    "Software Component Version KRNL64UC7.20 [01200615320200013056] differs between <System1> and <System2>"
    and
    Software Component Version SAPJVM6.1 [01200615320200012982] differs between <System1> and <System2>"
    However, this is not the case when checked, it's strange that this particular component has the same version between the two systems, but the report says they differs in version.
    Please help check how to resolve the issue.
    SAP notes mentioned in below KBA were already obsolete. Solution Manager system just upgraded to 7.1 SP11.
    1711612 - RPT_MOPZ_COPY_STACK_XML Report Troubleshooting.
    We would appreciate your response for us to resolve this issue. Thanks.
    Regards,
    Philip

    Hi Jansi, Divyanshu,
    Both system have the same patch levels.
    Here the situation, SYS1 is where we generated the stack xml file. Afterwards, used that stack file to upgrade SYS1.
    Now we built SYS2, ensuring it has the same components version with the un-upgraded version of SYS1, so yes they have same patch number for same components, for this issue, kernel and jvm.
    Thus, instead of running MOPZ for SYS2, we used RPT_MOPZ_COPY_STACK_XML to convert the stack file of SYS1 to be used for SYS2.
    This is where we encountered below messages, when performing the copy.
    "Software Component Version KRNL64UC7.20 [01200615320200013056] differs between <System1> and <System2>"
    and
    Software Component Version SAPJVM6.1 [01200615320200012982] differs between <System1> and <System2>"
    We previously used SOLMAN 7.0 SP23, and the report is working fine there. Then recently, solman was upgraded to 7.1 SP11, and now the report is not working with the above issue.
    We would appreciate if you could share actions on how we can fix the issue.
    Regards,
    Philip

Maybe you are looking for

  • Is it possible to emulate an applet with all debugging and connectivity?

    I am sorry to ask this probably very common question, but i have googled a lot and haven't found any really helpful and clear information about this topic. i have to develop an javacard applet which functionality can be controlled by a terminal (GUI)

  • ASCII control characters in XML

    hi,guys I want to export InDesign content to an XML file using javascript. The problem is, except for TAB, LF, and CR the control characters (those below ASCII 32) are not allowed in well-formed XML and any parser worth its salt will puke. Adobe (mis

  • Cannot add music and  video

    My Iphone is updated to I tunes, but when I click and drag my music and videos to my iphone I get a circle with a line through it and I cannot add any music or video to my phone?

  • Setting up vacation rules from Mass Timecard Approval Responsibilty.

    Our users are using the Mass Timecard Approval for Oracle OTL to approve timecards. This does not however seem to have a link to set up vacation rules. It seems they can only do this from their workflow homepage however we don't want to have to re-as

  • SCCM 2012 R2 changing date and time for patching software update groups

    I recieve this error when changing date and time for software update group. worked fine yesterday before patches to the server were applied last night. we removed patches but still get error below. Any help would be great. ConfigMgr Error Object: ins