DNS Error - Event ID - 4015

Recently I added a 2012 DC to my existing AD forest. All went well but after somedays when I checked my DNS event logs in the 2012 Domain controller, Saw 4015 event error popping every 30 mnts. I ran DCDIAG /Test:DNS, below are the results.
Help required to resolve this issue.
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = TRY2AD01
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: TRICHY2\TRY2AD01
Starting test: Connectivity
The host 5326b8e1-9295-42a5-afcd-1875a30cc815._msdcs.abcxyz.com
could not be resolved to an IP address. Check the DNS server, DHCP,
server name, etc.
Got error while checking LDAP and RPC connectivity. Please check your
firewall settings.
......................... TRY2AD01 failed test Connectivity
Doing primary tests
Testing server: TRICHY2\TRY2AD01
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
......................... TRY2AD01 passed test DNS
Running partition tests on : ForestDnsZones
Running partition tests on : DomainDnsZones
Running partition tests on : Schema
Running partition tests on : Configuration
Running partition tests on : abcxyz
Running enterprise tests on : abcxyz.com
Starting test: DNS
Test results for domain controllers:
DC: TRY2AD01.abcxyz.com
Domain: abcxyz.com
TEST: Basic (Basc)
Error: No LDAP connectivity
No host records (A or AAAA) were found for this DC
TEST: Records registration (RReg)
Network Adapter
[00000011] HP Ethernet 1Gb 4-port 366i Adapter:
Warning:
Missing CNAME record at DNS server 10.5.1.51:
5326b8e1-9295-42a5-afcd-1875a30cc815._msdcs.abcxyz.com
Warning:
Missing SRV record at DNS server 10.5.1.51:
_ldap._tcp.0d19fcef-ee46-428f-b317-7bc664aebdd3.domains._ms
dcs.abcxyz.com
Warning:
Missing SRV record at DNS server 10.5.1.51:
_kerberos._tcp.dc._msdcs.abcxyz.com
Warning:
Missing SRV record at DNS server 10.5.1.51:
_ldap._tcp.dc._msdcs.abcxyz.com
Warning:
Missing SRV record at DNS server 10.5.1.51:
_kerberos._tcp.TRICHY2._sites.dc._msdcs.abcxyz.com
Warning:
Missing SRV record at DNS server 10.5.1.51:
_ldap._tcp.TRICHY2._sites.dc._msdcs.abcxyz.com
Warning:
Missing SRV record at DNS server 10.5.1.51:
_ldap._tcp.gc._msdcs.abcxyz.com
Error:
Missing SRV record at DNS server 10.5.1.51:
_ldap._tcp.TRICHY2._sites.gc._msdcs.abcxyz.com
Warning:
Missing CNAME record at DNS server 10.5.1.50:
5326b8e1-9295-42a5-afcd-1875a30cc815._msdcs.abcxyz.com
Warning:
Missing SRV record at DNS server 10.5.1.50:
_ldap._tcp.0d19fcef-ee46-428f-b317-7bc664aebdd3.domains._ms
dcs.abcxyz.com
Warning:
Missing SRV record at DNS server 10.5.1.50:
_kerberos._tcp.dc._msdcs.abcxyz.com
Warning:
Missing SRV record at DNS server 10.5.1.50:
_ldap._tcp.dc._msdcs.abcxyz.com
Warning:
Missing SRV record at DNS server 10.5.1.50:
_kerberos._tcp.TRICHY2._sites.dc._msdcs.abcxyz.com
Warning:
Missing SRV record at DNS server 10.5.1.50:
_ldap._tcp.TRICHY2._sites.dc._msdcs.abcxyz.com
Warning:
Missing SRV record at DNS server 10.5.1.50:
_ldap._tcp.gc._msdcs.abcxyz.com
Error:
Missing SRV record at DNS server 10.5.1.50:
_ldap._tcp.TRICHY2._sites.gc._msdcs.abcxyz.com
Warning:
Missing CNAME record at DNS server 10.5.1.50:
5326b8e1-9295-42a5-afcd-1875a30cc815._msdcs.abcxyz.com
Warning:
Missing SRV record at DNS server 10.5.1.50:
_ldap._tcp.0d19fcef-ee46-428f-b317-7bc664aebdd3.domains._ms
dcs.abcxyz.com
Warning:
Missing SRV record at DNS server 10.5.1.50:
_kerberos._tcp.dc._msdcs.abcxyz.com
Warning:
Missing SRV record at DNS server 10.5.1.50:
_ldap._tcp.dc._msdcs.abcxyz.com
Warning:
Missing SRV record at DNS server 10.5.1.50:
_kerberos._tcp.TRICHY2._sites.dc._msdcs.abcxyz.com
Warning:
Missing SRV record at DNS server 10.5.1.50:
_ldap._tcp.TRICHY2._sites.dc._msdcs.abcxyz.com
Warning:
Missing SRV record at DNS server 10.5.1.50:
_ldap._tcp.gc._msdcs.abcxyz.com
Error:
Missing SRV record at DNS server 10.5.1.50:
_ldap._tcp.TRICHY2._sites.gc._msdcs.abcxyz.com
Error: Record registrations cannot be found for all the network
adapters
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: abcxyz.com
TRY2AD01 PASS FAIL PASS PASS PASS FAIL n/a
......................... abcxyz.com failed test DNS

I would recommend following the IP settings recommendation mentioned here: http://social.technet.microsoft.com/wiki/contents/articles/18513.active-directory-replication-issues-basic-troubleshooting-steps-single-ad-domain-in-a-single-ad-forest.aspx
Once the IP settings are fine, please restart netlogon service and run
ipconfig /registerdns on the faulty DCs.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Similar Messages

DNS Errors (Event 4015) on one DC when I reboot the other

I have two Server 2012 Domain Controllers. Each has DNS and DHCP with failover. The NIC properties of each server have the primary DNS pointing to the other server and the secondary DNS pointing to itself (127.0.0.1).
DC1 holds the
Schema Master, Domain Naming Master, PDC Master, RID Pool Manager and Infrastructure Master roles. Both DCs are Global Catalogs.
When I reboot or turn off DC1, DC2 logs an error 4015...
The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
...every second.
Does anyone know how to fix this?

Well, it makes sense that it should point to it self, as it is always available. If you point to a another dns as primiary, dns request will slow down as long as that dns server is down. I believe you've set up both dns's to forward any non resolveable
requests?
For the FSMO roles, you can always move them if you have a scheduled downtime.
Best Regards,
Jesper Vindum, Denmark
Systems Administrator
Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem.
Yes, both DNS's are set to forward non-resolvable requests. I just ran the Best Practices Analyzer on DC1 and it gave me several warning but one of them is not correct. It says...
Error DNS: DNS servers on Ethernet should include the loopback address, but not as the first entry.
Problem: The network adaptor Ethernet does not list the local server as a DNS server; or it is configured as the first DNS server on this adaptor.
I am including the loopback address and it is not the first entry. I don't know why it misidentified this.
EDIT: I think it must be seeing the IPV6 address. If I do an ipconfig /all, the first entry in the DNS server list is...
::1
10.1.3.4
127.0.0.1
Can I set it so that the IPV4 addresses are first in the priority?

Windows server 2012 R2 DC (Hyper-V Guest OS) DNS error event id 4013 in log after installing KB2975719 and/or KB2995388

Hi,
I just freshly installed a guest OS Windows 2012R2 on a Hyper-V 2012R2 server. Installed lots of updates and did many reboots, after that I installed the AD component. Couple of days later I'm having trouble with a RemoteDesktop server joining the domain.
After some research I see in the DNS log the following message:
Type: Warning
User: N/A
Computer: Fileserver.domain.com
Source: DNS
Catagory: None
Event ID: 4013
The description for Event ID ( 4013 ) in Source ( DNS ) cannot be found. Either the component that raises this event is not installed on your local computer, or the installation is corrupted. You can install or repair the component on the local computer,
or contact the component manufacturer for a newer version.
If the event was saved from another computer or forwarded from a remote computer, you might have to include display information with the events when saving them or when setting up the forwarding s .
This message is followed up with:
Type: Information
User: N/A
Computer: Fileserver.domain.com
Catagory: None
Event ID: 4
The description for Event ID ( 4 ) in Source ( DNS ) cannot be found. Either the component that raises this event is not installed on your local computer, or the installation is corrupted. You can install or repair the component on the local computer,
or contact the component manufacturer for a newer version.
If the event was saved from another computer or forwarded from a remote computer, you might have to include display information with the events when saving them or when setting up the forwarding s .
Type: Information
User: N/A
Computer: Fileserver.domain.com
Catagory: None
Event ID: 2
The description for Event ID ( 2 ) in Source ( DNS ) cannot be found. Either the component that raises this event is not installed on your local computer, or the installation is corrupted. You can install or repair the component on the local computer, or
contact the component manufacturer for a newer version.
If the event was saved from another computer or forwarded from a remote computer, you might have to include display information with the events when saving them or when setting up the forwarding s .
I did a restore from an earlier point, recreated the ActiveDirectory, but messages still coming in DNS log. I started from scratch with installing a new guest OS Windows 2012R2, directly after loging in first time, I installed AD component, and
give the server a reboot. and got the events below that looks normal:
Type: Warning
User: N/A
Computer: Fileserver.domain.com
Catagory: None
Event ID: 4013
The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical DNS
data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet
Protocol properties of this computer. This event will be logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.
For more information, see Help and Support Center at
Type: Information
User: N/A
Computer: Fileserver.domain.com
Catagory: None
Event ID: 2
The DNS server has started.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Type: Information
User: N/A
Computer: Fileserver.domain.com
Catagory: None
Event ID: 4
The DNS server has finished the background loading and signing of zones. All zones are now available for DNS updates and zone transfers, as allowed by their individual zone configuration.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
After that I create snapshots after installing every (10-15 updates), reboot, check dns log, and almost the last update, the KB2975719 and/or
KB2995388 is giving the weird messages in the DNS log.
http://www.microsoft.com/en-US/download/details.aspx?id=44051
Any idea?
Kind regards,
Steven

Hi Steven,
Would you please tell us that is the event 4013 logged continuously?
If this event is only logged after reboot or restart DNS service, then it is a normal behavior.
As we can see Event 4, which indicates that the DNS zones have been loaded successfully.
In addition, if Event IDs 4523 and 4524 are being logged after the Event 4013, then there is no problem with DNS service.
More information for you:
Event ID 4013 — DNS Server Active Directory Integration
http://technet.microsoft.com/en-us/library/cc735842(v=WS.10).aspx
Event ID 4 — DNS Server Service Status
http://technet.microsoft.com/en-us/library/dd349715(v=WS.10).aspx
Best Regards,
Amy

DNS error 404, 407,408 on Server 2008 R2

Trying migrate an old Server 2003 DC to 2008 DC. I ran adprep, forest etc on the old domain controller and everything was successful.
On the first domain controller (Server 2003) the 1<sup>st</sup> NIC card has an IP of 192.168.1.2 subnet of 255.255.255.0, gateway of 192.168.1.1 (Router) and DNS of 192.168.1.10.
On the 2<sup>nd</sup> card on the same server, the IP is 192.168.1.10, subnet of 255.255.255.0, gateway of 192.168.1.1 and DNS 192.168.1.10.
When I first tried to promote active directory I received an RPC error.
I noticed that RRAS was installed on the old domain controller and removed it since it is no longer needed.
After removing, Active directory successfully transferred and replicated.
I then went to Transfer the FSMO roles and it transferred successfully.
After rebooting the 2008 server I now get a DNS error “The DNS server could not open socket for address 192.168.1.9.”, “The DNS server could not bind a Transmission Control Protocol (TCP) socket
to address 192.168.1.9”. “The DNS server could not bind a User Datagram Protocol (UDP) socket to 192.168.1.9.”
These errors are 404, 407 and 408. On other programs are running on port 53.
On active directory I get an event error Event ID2092 ” This server is the owner of the following FSMO role, but does not consider it valid.”
If I shut down the old 2003 domain controller active directory does not work.
I cannot connect to Active directory sites and services, users and computers etc.
The old domain controller resumed the primary FSMO roles.
What can I do to correct this problem?

Hi,
Holding two NICs/IP address is not recommanded on DCs, Mr. Ace got a blog on this, see:
Multihomed DCs with DNS, RRAS, and/or PPPoE adapters
http://msmvps.com/blogs/acefekay/archive/2009/08/17/multihomed-dcs-with-dns-rras-and-or-pppoe-adapters.aspx
If two IP addresses on the old DC are no longer needed, please try to configure into one IP address. We may consider to transfer the FSMO back and once the environment is clean, we can then have all the FSMOs on the new DC.
Please run DCDiag, NetDiag and Repadmin to check the health of the DCs and the replication and
Ipconfig /all for the two DCs, If possible, please upload the output into skydrive and post the link here.
In addition, please check if the following articles could help:
Event ID 408 — DNS Server Configuration
Event ID 404 — DNS Server Service Status
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Error event id: 16002

I get on one AD/DC, DNS server in the shool an warning error, event id: 16002;
"Closing a UDP socket with local port number 49631 in process 1160 is taking longer than expected. The local port number may not be available until the close operation is completed. This happens typically due to misbehaving network drivers. Ensure latest
updates are installed for Windows and any third-party networking software including NIC drivers, firewalls, or other security products. "
Anny idea why i get this error and why the server hangs till reboot. I can't do annything while the error is running only reboot by pushing the power button.
I have allready checked the drivers and they look up to date. This thee third time in 3 weeks.
Hope someone has a solution.

Hi,
This is the first event that gives a error with red flag.
at 11:00:59
"The DNS server timed out attempting an Active Directory service operation on cn=MicrosoftDNS,cn=System,DC=gbs-schransdries,DC=be. Check Active Directory to see that it is functioning properly. The event data contains the error.
- System
- Provider
   [ Name] Microsoft-Windows-DNS-Server-Service
   [ Guid] {71A551F5-C893-4849-886B-B5EC8502641E}
   EventID 4016
   Version 0
   Level 2
   Task 0
   Opcode 0
   Keywords 0x8000000000020000
- TimeCreated
   [ SystemTime] 2015-03-09T10:00:59.754811100Z
   EventRecordID 4546
   Correlation
- Execution
   [ ProcessID] 1900
   [ ThreadID] 3308
   Channel DNS Server
- Security
   [ UserID] S-1-5-18
- EventData
param1 cn=MicrosoftDNS,cn=System,DC=gbs-schransdries,DC=be
   55000000
and then after 9 min the following error happens with a yellow flag.
"Closing a UDP socket with local port number 52817 in process 1160 is taking longer than expected. The local port number may not be available until the close operation is completed. This happens typically due to misbehaving network drivers. Ensure latest
updates are installed for Windows and any third-party networking software including NIC drivers, firewalls, or other security products.
11:09:56 afd warning
- System
+ Provider
   [ Name] AFD
- EventID 16002
   [ Qualifiers] 32768
   Level 3
   Task 0
   Keywords 0x80000000000000
- TimeCreated
   [ SystemTime] 2015-03-09T10:09:56.708985900Z
   EventRecordID 282119
   Channel System
   Computer
   Security
- EventData
   \Device\Afd
   UDP
   52817
   1160
   000000000400300000000000823E0080000000000000000000000000000000000000000000000000
Hope you can make something out of this?
Regards

ISA Server 2006 DNS error issue

we are using ISA server 2006, and we are facing issue DNS Clients services, we need to restart its DNS client services in 10min or 15mins, 1st error event ID is 8003, Sources :-MRxSmb and 2nd event ID 11160, Source:- DNSApi.

Hi,
By default, ISA Server is configured to log requests that come through the Web Proxy Service. You can check by opening
the ISA Management MMC and choosing Monitoring Configuration, and then clicking Logs. In addition,
all log files are stored in the ISALogs folder found in the Microsoft ISA Server folder if you never specify the folder for storing the log file.
You can check the IAS log files for troubleshooting since it is hard to say which would be the reason.
Best regards,
Susie

I can't connect to Internet anymore (WIFI or Ethernet). This was working perfectly before. I don't get a proper IP address from my ADSL box and it seems there is a DNS error when accessing the Internet.

I have an issue with my MacBook pro (MAC OS X 10.8.3) when trying to access Internet. I am behind an ADSL box (Orange). I have a PC on the same LAN which accesses Internet perfectly via the same Box.
On the MAC, I have tried WIFI and Ethernet. And have same issue on both. I have checked the IP address (the ADSL box is a DHCP server) but the MAC doesn't get a proper IP and network mask I tried a manual IP address setup and it doesn't get better. I have setup the DNS servers for my Internet provider, but I get DNS error. I have tried 2 Internet browsers (Chrome and Safari), both have the same issue.
I tried to put my MAC on a different ADSL box (I have 2 acccesses with 2 providers at home) and get the same issue.
I also noticed a havy CPU load on the mDNSResponder process (at least 30%). I have restarted it, but no improvement.
Last, I have repared the permissions.
From those trials, it seems that the problem is on the Mac side. But I am completelly without any new idea, so I need help
Thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

WRT54G2 DNS errors when connecting online to PS3... at a loss for ideas...

Im having dns problems ever since PSN went back online and i cannot connect to the internet with my PS3 or log onto PSN. At first i would get dropped as soon i joined an online game, and it was running very slowly, but now it wont connect at all.
Wired works perfectly. Wireless wont work.
If i use automatic setup then the ip address fails.
If i manually set everything then the ip address passes but the internet connection fails and i get a dns error.
Signal strength is 100% and i have a Linksys WRT54G2 router. (worked perfect 2+ years until this week)
I have Roadrunner cable modem.
I did ipconfig/all and enetered all numbers from there and didnt work.
I used standard dns like google and such and those didnt work.
Im seriously at a loss for ideas. Is my router broken? Please can anyone help?

I don't think it's necessarily your router. I've encountered the same problem on my WRT54GC and I used OpenDNS. But it gave me all sorts of problems with different websites so I had to take it out and use manual DNS. I used all sorts of combinations through until I got 4.2.2.2 to work.
EDIT: also, try going in to your router's setup page and click Status. Take note of the DNS values and use those in setting up your PS3.

While viewing a page I suden get "Oops! This page appears broken. DNS Error - Server cannot be found." However I can back arrow to the page

I just upgrade to versions 18.0.1. I am suing Window 7 64 bit.
Now I while I am viewing a page I suddenly receive the error massage "Oops! This page appears broken. DNS Error - Server cannot be found."
I can use the back arrow key to bring the paper back.
If I have several tabs open, I can watch one tab after another change from the page name, It doesn't seem to matter who page it is, Yahoo, Washington Post, NBCNews,

I am not a techie. I keep 15-20 to tabs open at a time for reference while working. When I upgraded to this version, all my tabs were closed and my history was erased. I still have not recovered from that loss. I do not want to have this repeated!
If I was using pdfforge extension (what ever that is) before the upgrade, why is it venomous now?
Besides this issue, since upgrading I suddenly starting having the audio from commercials being played from tabs that are not active (open). I now have to leave my audio muted.
I expected assistance from Firefox not some unknown individual ( iamjayakumars) who for all I know is a troll trying to get me to do something to expose my computer to attack.
I allowed Firefox to collect data they needed from my computer when I submitted the question.
Fix the bug in your program! I have used Firefox since it came out. I am within a hairs width of switching browser. The only thing holding me with Firefox is my bookmarks. If I figure out how to export them, I am gone.
FIX YOUR BROWSER!!!

CrystalReportViewer: "Missing parameter values with implemented error event

I'm using the CrystalReportViewer in APS.net (C#), and try to display a report in it.
I've implemented the error event of the viewer to show the user a different error message than the viewer itself does.
         this.CrystalReportViewer.Error += new CrystalDecisions.Web.ErrorEventHandler(CrystalReportViewer_Error);
      protected void CrystalReportViewer_Error(object source, CrystalDecisions.Web.ErrorEventArgs e)
         var msg = "Error in CrystalReportViewer\r\n{0}".FormatInvariant(e.ErrorMessage);
         throw new InvalidOperationException(msg);
But.... Now if I want to show a report that has parameters in it, the parameter page does not appear before the report itself. How can I make my code work (without removing the implementation of the error event), so the viewer first shows the parameter page, before showing the actual report?

And in the Page_Load method:
this.CrystalReportViewer.Error += new CrystalDecisions.Web.ErrorEventHandler(CrystalReportViewer_Error);
I've done this so i can show my own error page to the user of the website. Otherwise the CRViewer shows his own error, and I do not want the user of the website to see this 'technical' error.
So i've implemented the CrystalReportViewer.Error method:
protected void CrystalReportViewer_Error(object source, CrystalDecisions.Web.ErrorEventArgs e)
   // Missing parameter values.
   var discardToShowParameterPrompt = (e.ErrorMessage.ToUpperInvariant() == "Missing parameter values.".ToUpperInvariant())
     || (e.ErrorMessage.ToUpperInvariant() == "Ontbrekende parameterwaarden.".ToUpperInvariant());
   if (discardToShowParameterPrompt)
      _Log.Debug("The parameter screen should be displayed now.");
   else
      var msg = "Error in CrystalReportViewer: {0}".FormatInvariant(e.ErrorMessage);
      throw new InvalidOperationException(msg);
If I load a report with no params in the report, the page shows immediately the report.
If I load a report with params in the report, the params page is shown, the user can enter the param values, and after pressing OK, the report is shown.
If an error occurs (for example the report cannot connect to the database), the viewer does NOT show the error (because i've implemented the _error event) but my code throws an InvalidOperationException, and this is handled by code so the error is logged to a file, and the user gets a user friendly message on the website.
If i do not implement the _error event, the user will see the technical error in the crystal reports viewer.
If I comment out the code where I'm looking for the string "Missing parameter values." (or "Ontbrekende parameterwaarden") the parameter page will not be shown, and an error will be thrown by the Crystal Reports viewer.
If I put e.handled = true in the _error event, and there is an error (for example the database cannot be found), no error will be thrown, and there is nothing to see in the viewer.
So for now the only way to get the params page is to implement the _error event the way i've done in the above code, checking the error message on a string value.

Adobe Acrobat 8 Pro Application Error Event ID 1000

Version: Adobe Acrobat 8 Pro (Updated)
Operating System: Windows XP (Sp2)
Launch Adobe Acrobat 8 Pro
Select File and open a PDF file
Popup appears: Reading Untagged Document
Then and error appears ... Adobe Acrobat 8.1 has encountered a problem and needs to close
Also receive same error when I select Edit\Preferences
Application Event log contains the following:
Application Error Event ID 1000
Faulting application acrobat.exe, version 8.1.0.137, faulting module admplugin.apl, version 3.16.128.32, fault address 0x000a7bf1.
Have uninstalled and reinstalled application...no change
Any help would be apprciated

No, I have not.
Had another laptop and used it.
Re-imaged laptop exhibiting the issue and moved on
Edward Bailey | Network Administrator | Pizza Inn, Inc
t. 469.384.5231 [email protected]

Quorum/Witness Disk Offline every 15 minutes error - Event ID 1069 - Event ID 1558

2 node active passive, 2008 failover cluster. I keep getting the following error events:
The cluster service detected a problem with the witness resource. The witness resource will be failed over to another node within the cluster in an attempt to reestablish access to cluster configuration data. Event ID 1558
Cluster resource 'Cluster Disk 1' in clustered service or application 'Cluster Group' failed. Event ID 1069
However my quorum disk is online from what I can see. One thing I did notice is, the Quorum disk no longer has any files in it. It is just a empty drive.
I also noticed these errors are being entered every 15 minutes exactly.
I monitored the Quorum disk and it is going offline momentarily every 15 minutes.
Experts Exchange Posts indicate this is known issue and waiting for microsoft to deliver SP2? Really?
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/Windows_Server_2008/Q_24751092.html
Any thoughts

support.microsoft.com/kb/2750820 - This does not resolved your issue because it applies only to the Quorum model Node and File share majority.
The issue is because of the cluster configuration corruption and cluster I checking after every 15 minute and is seeing the cluster quorum disk in failed state (actually it is not failed) but is not able to update the current state of the quorum disk.
Check for below logs in the cluster logs:
00000d84.00000f58::2014/11/18-19:04:06.805 INFO [QUORUM] Node 1: Witness Failed Gum Handler [QUORUM] Node 1
00000d84.00000f58::2014/11/18-19:04:06.805 INFO [QUORUM] Node 1: witness attach failed. next restart will happen at 2014/11/18-13:19:06.797
00000d84.00000ef8::2014/11/18-19:04:06.805 INFO [QUORUM] Node 1: quorum is not owned by anyone
Try reforming the cluster, it will resolve the issue.
Change the quorum model to Node majority and back to node and disk majority.
Stop cluster service on all the nodes and then start them back when it is stopped on all the nodes.
Thanks
Himanshu Swarnkar (MSFT)

Event Source: Application Error Event ID: 1000 (F1Server.exe)

Hi.
We regulary have an Application Error with "faulting module ntdll.dll" (see below).
And we can't find what is the problem.
Can you help us?
Windows Server 2003 R2 Eneterprise Edition Service Pack 2
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows Server 2003, Enterprise" /noexecute=AlwaysOff /fastdetect /PAE /3Gb
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date: 1/11/2014
Time: 10:33:47 PM
User: N/A
Computer: MS-GARANT001
Description:
Faulting application F1Server.exe, version 7.9.0.0, faulting module ntdll.dll, version 5.2.3790.4937, fault address 0x00060c17.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 46 31 53 ure F1S
0018: 65 72 76 65 72 2e 65 78 erver.ex
0020: 65 20 37 2e 39 2e 30 2e e 7.9.0.
0028: 30 20 69 6e 20 6e 74 64 0 in ntd
0030: 6c 6c 2e 64 6c 6c 20 35 ll.dll 5
0038: 2e 32 2e 33 37 39 30 2e .2.3790.
0040: 34 39 33 37 20 61 74 20 4937 at
0048: 6f 66 66 73 65 74 20 30 offset 0
0050: 30 30 36 30 63 31 37 0060c17

Hi,
This issue may be caused by corrupted files or application conflicts. I recommend you to run "sfc /scannow" at the command prompt to check the system files. In addition, you can perform a clean boot to see if any service is causing the issue.
If the above cannot solve it, maybe you can find if there is any hotfix for the application or uninstall the application.
Best regards,
Susie

Error "Event Queue Overflowed" with the "Write file to Citadel Server"

Hello,
I can import data from a file and I can see the data
in the historical database without troubling.
But I always have this error "Event Queue Overflowed", that don't perturb my data and my application (I have just this boring message).
I have tried many things :
- increasing the size of my input buffer (-> 1.000.000, no change) : I don't think so that it's important because I've tried with a value of 100 and anyway sometimes my application works with this small value of 100.
- increasing the File_location tag size (-> 260). No change.
- My write to Citadel.cfg is in the LabVIEW folder.
Can you help me ?
Thank you.

Hi,
What version of LabVIEW DSC are you using? if it is 6.1, have you applied fixes linked below.
http://digital.ni.com/softlib.nsf/websearch/513AA4A0BB60D10086256B48006D44B5?opendocument
I have seen a similar issue at the link below.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=5065000000080000008C640000&ECategory=LabVIEW.Datalogging+and+Supervisory+Control
Please let me know if you have read it through?
Best Regards,
Remzi A.

DNS Error on OS X 10.6 Server: unexpected RCODE (REFUSED) resolving

Hello
At one of our server we have properly an DNS error.
Portforward to router ist correct. Router has the entries of the Erxternal DNS Server. On the OS X server runs the DNS und DHCP services.
The log is complete full with errors
Access to website is relativly slow.
Any idea how to solve it?
Gérard
10-Sep-2014 00:51:08.633 host unreachable resolving 'blackhole-1.iana.org/A/IN': 2001:500:89::53#53
10-Sep-2014 00:51:09.017 host unreachable resolving 'g2.nstld.com/AAAA/IN': 2001:503:a83e::2:31#53
10-Sep-2014 00:51:09.018 host unreachable resolving 'f2.nstld.com/AAAA/IN': 2001:503:a83e::2:31#53
10-Sep-2014 00:51:09.314 host unreachable resolving 'ns102.nstld.net/A/IN': 2001:503:231d::2:30#53
10-Sep-2014 00:51:09.370 unexpected RCODE (REFUSED) resolving 'h2.nstld.com/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:09.370 unexpected RCODE (REFUSED) resolving 'h2.nstld.com/AAAA/IN': 172.24.10.1#53
10-Sep-2014 00:51:09.579 unexpected RCODE (REFUSED) resolving 'ytstatic.l.google.com/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:09.690 unexpected RCODE (REFUSED) resolving 'ocsp.comodoca.com/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:10.792 host unreachable resolving 'a.iana-servers.net/AAAA/IN': 2001:500:8d::53#53
10-Sep-2014 00:51:10.793 host unreachable resolving 'a.iana-servers.net/AAAA/IN': 2001:500:8e::53#53
10-Sep-2014 00:51:10.793 host unreachable resolving 'a.iana-servers.net/A/IN': 2001:500:8d::53#53
10-Sep-2014 00:51:10.805 host unreachable resolving 'c.iana-servers.net/A/IN': 2001:500:8e::53#53
10-Sep-2014 00:51:11.821 success resolving 'db._dns-sd._udp.0.10.24.172.in-addr.arpa/PTR' (in '24.172.in-addr.arpa'?) after reducing the advertised EDNS UDP packet size to 512 octets
10-Sep-2014 00:51:11.863 success resolving 'r._dns-sd._udp.0.10.24.172.in-addr.arpa/PTR' (in '24.172.in-addr.arpa'?) after reducing the advertised EDNS UDP packet size to 512 octets
10-Sep-2014 00:51:11.946 unexpected RCODE (REFUSED) resolving 'ns0.comododns.net/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:11.946 unexpected RCODE (REFUSED) resolving 'ns0.comododns.net/AAAA/IN': 172.24.10.1#53
10-Sep-2014 00:51:11.953 unexpected RCODE (REFUSED) resolving 'ns1.comododns.net/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:11.953 unexpected RCODE (REFUSED) resolving 'ns1.comododns.net/AAAA/IN': 172.24.10.1#53
10-Sep-2014 00:51:12.055 success resolving 'dnn506yrbagrg.cloudfront.net/A' (in 'dnn506yrbagrg.cloudfront.net'?) after reducing the advertised EDNS UDP packet size to 512 octets
10-Sep-2014 00:51:13.652 success resolving 'dr._dns-sd._udp.0.10.24.172.in-addr.arpa/PTR' (in '24.172.in-addr.arpa'?) after reducing the advertised EDNS UDP packet size to 512 octets
10-Sep-2014 00:51:13.729 success resolving 'cf._dns-sd._udp.0.10.24.172.in-addr.arpa/TXT' (in '24.172.in-addr.arpa'?) after reducing the advertised EDNS UDP packet size to 512 octets
10-Sep-2014 00:51:14.164 success resolving 'lb._dns-sd._udp.0.10.24.172.in-addr.arpa/PTR' (in '24.172.in-addr.arpa'?) after reducing the advertised EDNS UDP packet size to 512 octets
10-Sep-2014 00:51:14.164 success resolving 'b._dns-sd._udp.0.10.24.172.in-addr.arpa/PTR' (in '24.172.in-addr.arpa'?) after reducing the advertised EDNS UDP packet size to 512 octets
10-Sep-2014 00:51:14.265 host unreachable resolving 'ocsp.verisign.net/A/IN': 2001:503:3227:10ff::206#53
10-Sep-2014 00:51:14.303 success resolving 'ocsp.verisign.net/A' (in 'ocsp.verisign.net'?) after reducing the advertised EDNS UDP packet size to 512 octets
10-Sep-2014 00:51:14.326 unexpected RCODE (REFUSED) resolving 'ssl.gstatic.com/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:14.499 unexpected RCODE (REFUSED) resolving 'www.gstatic.com/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:14.499 unexpected RCODE (REFUSED) resolving 'apis.google.com/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:14.531 unexpected RCODE (REFUSED) resolving 'ads.yahoo.com/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:14.559 unexpected RCODE (REFUSED) resolving 'pix04.revsci.net/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:17.330 unexpected RCODE (REFUSED) resolving 'plus.l.google.com/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:17.380 host unreachable resolving 'ns1.comododns.net/AAAA/IN': 2a02:1788:0:200::5bd1:c404#53
10-Sep-2014 00:51:17.708 unexpected RCODE (REFUSED) resolving 'www.gillette.com/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:17.797 host unreachable resolving 'ns0.comododns.net/A/IN': 2a02:1788:0:200::5bd1:c404#53
10-Sep-2014 00:51:21.142 unexpected RCODE (REFUSED) resolving 'ad.yieldmanager.com/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:21.306 unexpected RCODE (REFUSED) resolving 'ns01.savvis.net/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:21.306 unexpected RCODE (REFUSED) resolving 'ns01.savvis.net/AAAA/IN': 172.24.10.1#53
10-Sep-2014 00:51:21.307 unexpected RCODE (REFUSED) resolving 'ns02.savvis.net/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:21.315 unexpected RCODE (REFUSED) resolving 'ns02.savvis.net/AAAA/IN': 172.24.10.1#53
10-Sep-2014 00:51:21.315 unexpected RCODE (REFUSED) resolving 'ns03.savvis.net/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:21.316 unexpected RCODE (REFUSED) resolving 'ns03.savvis.net/AAAA/IN': 172.24.10.1#53
10-Sep-2014 00:51:21.316 unexpected RCODE (REFUSED) resolving 'ns04.savvis.net/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:21.316 unexpected RCODE (REFUSED) resolving 'ns04.savvis.net/AAAA/IN': 172.24.10.1#53
10-Sep-2014 00:51:21.316 unexpected RCODE (REFUSED) resolving 'ns05.savvis.net/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:21.316 unexpected RCODE (REFUSED) resolving 'ns05.savvis.net/AAAA/IN': 172.24.10.1#53
10-Sep-2014 00:51:24.798 host unreachable resolving 'ns02.savvis.net/A/IN': 2001:503:a83e::2:30#53
10-Sep-2014 00:51:29.129 unexpected RCODE (REFUSED) resolving 'fd-world.ngd.gysm.yahoodns.net/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:33.723 success resolving 'www.gillette.com/A' (in 'gillette.com'?) after reducing the advertised EDNS UDP packet size to 512 octets
10-Sep-2014 00:51:38.595 unexpected RCODE (REFUSED) resolving 'yf1.yahoo.com/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:38.596 unexpected RCODE (REFUSED) resolving 'yf1.yahoo.com/AAAA/IN': 172.24.10.1#53
10-Sep-2014 00:51:38.596 unexpected RCODE (REFUSED) resolving 'yf2.yahoo.com/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:38.596 unexpected RCODE (REFUSED) resolving 'yf2.yahoo.com/AAAA/IN': 172.24.10.1#53
10-Sep-2014 00:51:38.596 unexpected RCODE (REFUSED) resolving 'yf3.a1.b.yahoo.net/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:38.596 unexpected RCODE (REFUSED) resolving 'yf3.a1.b.yahoo.net/AAAA/IN': 172.24.10.1#53
10-Sep-2014 00:51:38.596 unexpected RCODE (REFUSED) resolving 'yf4.a1.b.yahoo.net/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:38.596 unexpected RCODE (REFUSED) resolving 'yf4.a1.b.yahoo.net/AAAA/IN': 172.24.10.1#53
10-Sep-2014 00:51:49.413 success resolving 'fd-world.ngd.gysm.yahoodns.net/A' (in 'gysm.yahoodns.net'?) after reducing the advertised EDNS UDP packet size to 512 octets
10-Sep-2014 00:51:49.422 unexpected RCODE (REFUSED) resolving 'ds-world.ngdg.gysm.yahoodns.net/A/IN': 172.24.10.1#53
10-Sep-2014 00:51:55.354 unexpected RCODE (REFUSED) resolving 'ds-any-world.ngd.ysm.yahoodns.net/A/IN': 172.24.10.1#53
10-Sep-2014 00:52:21.228 unexpected RCODE (REFUSED) resolving 'swscan.apple.com/A/IN': 172.24.10.1#53
10-Sep-2014 00:52:35.516 unexpected RCODE (REFUSED) resolving 'p01-swscan.apple.com.akadns.net/A/IN': 172.24.10.1#53
10-Sep-2014 00:52:43.068 unexpected RCODE (REFUSED) resolving 'a5-130.akadns.org/A/IN': 172.24.10.1#53
10-Sep-2014 00:52:43.069 unexpected RCODE (REFUSED) resolving 'a5-130.akadns.org/AAAA/IN': 172.24.10.1#53
10-Sep-2014 00:52:43.075 unexpected RCODE (REFUSED) resolving 'a4-131.akadns.org/A/IN': 172.24.10.1#53
10-Sep-2014 00:52:43.076 unexpected RCODE (REFUSED) resolving 'a4-131.akadns.org/AAAA/IN': 172.24.10.1#53
10-Sep-2014 00:52:43.082 unexpected RCODE (REFUSED) resolving 'a10-128.akadns.org/A/IN': 172.24.10.1#53
10-Sep-2014 00:52:43.082 unexpected RCODE (REFUSED) resolving 'a10-128.akadns.org/AAAA/IN': 172.24.10.1#53
10-Sep-2014 00:52:43.083 unexpected RCODE (REFUSED) resolving 'a13-130.akadns.org/A/IN': 172.24.10.1#53
10-Sep-2014 00:52:43.083 unexpected RCODE (REFUSED) resolving 'a13-130.akadns.org/AAAA/IN': 172.24.10.1#53
10-Sep-2014 00:52:43.083 unexpected RCODE (REFUSED) resolving 'a28-129.akadns.org/A/IN': 172.24.10.1#53
10-Sep-2014 00:52:43.083 unexpected RCODE (REFUSED) resolving 'a28-129.akadns.org/AAAA/IN': 172.24.10.1#53
10-Sep-2014 00:52:49.925 host unreachable resolving 'a13-130.akadns.org/A/IN': 2001:500:b::1#53
10-Sep-2014 00:52:50.064 host unreachable resolving 'a10-128.akadns.org/AAAA/IN': 2001:500:48::1#53
10-Sep-2014 00:52:50.345 host unreachable resolving 'a4-131.akadns.org/AAAA/IN': 2001:500:c::1#53
10-Sep-2014 00:52:50.493 host unreachable resolving 'a4-131.akadns.org/A/IN': 2001:500:c::1#53
10-Sep-2014 00:52:50.791 host unreachable resolving 'a5-130.akadns.org/A/IN': 2001:500:b::1#53
10-Sep-2014 00:52:57.784 unexpected RCODE (REFUSED) resolving 'swcdn.apple.com/A/IN': 172.24.10.1#53
10-Sep-2014 00:53:05.726 unexpected RCODE (REFUSED) resolving 'swcdn.apple.com.akadns.net/A/IN': 172.24.10.1#53
10-Sep-2014 00:53:05.737 connection refused resolving 'swcdn.apple.com.akadns.net/A/IN': 195.186.4.162#53
10-Sep-2014 00:53:05.777 unexpected RCODE (REFUSED) resolving 'nlams2.cdn-apple.com.akadns.net/A/IN': 172.24.10.1#53
10-Sep-2014 00:53:46.040 unexpected RCODE (REFUSED) resolving 'nlams2.cdn-apple.com.akadns.net/A/IN': 172.24.10.1#53

No experiences here with that exact combination.
Something general:
Make sure access rights on the application support folder are correctly set for the user account that you're using to launch InDesign.
Run the OSX repair privileges utility.
Compare the general folder structure to your desktop installation, or the earlier installation (replacing an old hardware?).
If that fails:
Launch the application from within Instruments (which comes with the optional installation of developer tools, e.g. XCode)
Trace file access and watch out for error results.
Dirk

DNS Error - Event ID - 4015

Similar Messages

Maybe you are looking for