DNS Error when trying to connect xbox360 to WRT54G wireless network, Please help!!

I recently purchased a new router (WRT54G Ver.6) and the initial setup went well. however, when I try to connect my xbox 360 to this network, the DNS does not resolve and it fails every time. what should I do?

Hi…..
Well in this case first make sure whether the computers which are connected [wired or wireless] to the router are able to get online.
If the computers are not able to get online through the router then you will have to configure the router. And if the computers are able to get online then in order to resolve the DNS Error in order to get the X-Box360 working you can assign Static DNS Address to the X-Box
The Static DNS Address you can use can be 206.13.29.12 and 206.13.30.12

Similar Messages

I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed.

I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed. I've tried all suggestions from apple and nothing will work.
Please Help

I received this email from Apple and this corrected the problem for me... I only had to reset the iTunes cache
1) Open iTunes
2) At the top menu, click File > Preferences (iTunes > Preferences on a Mac)
3) In the Preferences menu, click the Advanced tab
4) In the Advanced menu, you should see a button that says "Reset Cache". Please click this button.

Getting Error when trying to connect to the Primavera database. PPM V7 SP3

Hi Guys,
Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'mailService' defined in class path resource [com/primavera/bre//com/primavera/bre/integration/intgconf.xml]: Invalid destruction signature; nested exception is org.springframework.beans.factory.support.BeanDefinitionValidationException: Couldn't find a destroy method named 'destroy' on bean with name 'mailService'
I have looked into the intgserver.jar under P6IntegrationAPI/lib and looked the com.primavera.infr.srvcs.MailServiceImpl.java and can see that there is no destroy method whereas it is defined in the com.primavera.bre.intergration.intgconf.xml as below

<bean id="mailService" class="com.primavera.infr.srvcs.MailServiceImpl" init-method="init" scope="singleton" destroy-method="destroy"*+>
<property name="adminManager"><ref bean="adminManager"/></property>
<property name="threadPool"><ref bean="threadPool"/></property>
<property name="settingsManager"><ref bean="settingsManager"/></property>
</bean>
I get the above error when trying to connect to the Primavera database. I use PPMV7 SP3 and I have installed the Integration API from EPPMV7 bundle.
My demo's are working fine.
Any help would be appreciated.
Thanks,
Kajal.

Hi Marc,
I am using a userid (is an admin)
Using global login method and provided userid & password in integration settings.
In the machine profiles, provided userid, password and domin.
Not providing domain in weblogin.
With all the above I am still getting error "Could not authenticate the specified user. %0" for HFM application
And with the same settings I am not getting any error to connect to essbase cube.
Any suggestions?
Thanks
Krishna

Errors when trying to connect CRM 7.0 to Enterprise Search

Hi!
I encountered 2 errors when trying to connect to a CRM 7.0 system as a backend system from Enterprise Search Cockpit.
The first error is related to ESH_INT_GET_TREX_DESTINATION with a message of ESH_OM_OBJ_MODEL_REP 517:
http://img39.imageshack.us/img39/9722/eserrors1.jpg
The second error is related to "Errors during data cluster import from remote system":
http://img97.imageshack.us/img97/7976/eserrors2.jpg
I don't know if these two errors are related, but any help or suggestions will be greatly appreciated!!
Thank you!
Regards,
Paul

4.0 should be fine. My initial thoughts were on the script targetting a framework lesser than 3.5. Am bummed about the error cause in the line
ClientContext clientContext =
new ClientContext(client);
it just creates an instance of the ClientContext class. It should have nothing to do with permissions cause it is not even trying to connect to the sharepoint site. So it looks like it can't find the assembly. Can you place the asembly
under the Microsoft.Net\Framework folder of your machine. SSIS looks for custom assemblies in this folder on design time (Refer
this) Worth a try hey!
http://btsbee.wordpress.com/

Oracle Fatal error when trying to connect through sqlplus

Hi,
I am getting the below error when trying to connect to instance through sqlplus
Database version is :10.2.0.3
Operating system= Solaris Operating System (SPARC 64-bit)
OS version=5.10
[lscbd07p2*BMC]-\ORACLE>sqlplus
SQL*Plus: Release 10.1.0.4.0 - Production on Fri Nov 9 07:48:24 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: /as sysdba
ld.so.1: oracle: fatal: relocation error: file /u01/app/oracle/product/db/10.1.0.4/lib/libjox10.so: symbol kststop_: referenced symbol not found
ERROR:
ORA-12547: TNS:lost contact
Enter user-name:
Could you all please give me suggestions in order to solve this problem.
Thanks
Mannu

Have you recently patched/upgraded? This sounds like there might have been a problem relinking the executables / libraries, and/or a permissions problem. For example you may be referencing a 32 bit library with your 64 bit client.
I believe I recently read a similar case - check Metalink for this symptom.
HTH
Regards Nigel

Keep getting sync service error when trying to connect my iphone 5S.

Keep getting sync service error when trying to connect my iphone 5S. It freezes itunes and I can't do anything else. I see that there is an update for my phone and I need to back up, upload new apps, etc before installing. I plug my phone in and get this error every time. I am using a Win 7 SP1

Howdy Susie48825,
It sounds like you are getting an error that mentions the sync services when you connect your phone to your computer and so you cannot sync your device. I would use the troubleshooting from the following article that mentions an error regardign the sync services named:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
Start with these steps:
1. Check that iTunes is up-to-date
Ensure that you have updated to the latest version of iTunes.
2. Reset Sync History
Resetting your Sync History is a simple step which may resolve some syncing issues. If this works, iTunes will prompt to Merge or Replace the information on your device when you next attempt to sync. To reset your Sync History:
Disconnect your device.
Open iTunes.
From the Edit menu, choose Preferences.
Click the Devices tab.
Click the Reset Sync History button, and then reconnect your device.
If this resolves the issue, and you know all of your contacts, calendars, bookmarks and notes are on your computer:
Reset the Sync History again using the steps above.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" select Contacts or Calendars.
Click Apply.
If the issue persists, and you know all your contacts, calendars, bookmarks and notes are on your iPhone, iPad, or iPod touch:
Remove all of the contact and calendar information from Outlook.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" make sure Contacts and Calendars are not selected.
Click Apply.
There are additional steps to use in the article if needed, but these will get you started.
Thank you for using Apple Support Communities.
All the very best,
Sterling

ORA-12560: TNS:protocol adapter error when trying to connect

hopefully somebody can help me out... the problem i'm having is connecting to the scott/tiger database. i keep getting :
"ORA-12560: TNS:protocol adapter error" when trying to connect to it. it worked previously, but i unistalled oracle 8i personal and reinstalled it. now it doesn't let me connect. what's going on?
thanx,
uriah

You can run the net8 assistant to set up your tnsnames.ora file.
start/programs/oracle/network administration/net8 assistant
When you are done it should look something like this:
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
     (PROTOCOL = TCP)
     (Host = )
     (Port = 1521)
(CONNECT_DATA = (SID = ORCL))
Bev

Hi, I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand new a while ago i was trying to connect to my home wireless network it said that your airport is not configured then I restarted the system but it didn't restart it shows the "

Hi,
I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand-new (the 4th time to use the device) a while ago i was trying to connect to my home wireless network it said that the connection is timed out so i clicked the airport sign on the top it said that your airport is not configured then I restarted the system but it didn't restarted it showed the grey screen with the apple logo and the spinning wheel for more than 10min so I tried the force shutdown by pressing the power button till it switched off I waited for 5min then pressed the power button to start or boot the system and again the grey screen with the apple logo and the spinning wheel, I waited for more than 20min nothing changed, any solution please?
Your help is really appreciated"

Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
Thanks really appreciating your help

Dns error when trying to start ssgd 4.4

Hi,
I get the following error when trying to start a fresh install of SSGD 4.4 on sun solaris 10 sparc machine
bash-3.00# /opt/tarantella/bin/tarantella start
Starting Secure Global Desktop server (version 4.40.917). Please wait...
2008/05/12 18:34:43.082 (pid 27580) server/common/fatalerror #1210597482966
Sun Secure Global Desktop Software (4.4) FATAL ERROR:
The configured DNS name of the server (unknown) couldn't be
resolved in DNS.
The server can't start.
Check your DNS configuration.
I tried changing the servername in the httpd.conf file but still get the above errors. What could be the possibel reasons for this error.
Thanks,

Hi,
I changed the peerdns name to "penguin.everett.nl"
Cbash-3.00# /opt/tarantella/bin/tarantella status
Array members (1):
- penguin.everett.nl (primary): NOT ACCEPTING CONNECTIONS.
bash-3.00#
However, when I now start the tarantella I get the following error :
bash-3.00# /opt/tarantella/bin/tarantella stop
Secure Global Desktop services are not currently running.
bash-3.00# /opt/tarantella/bin/tarantella start
Starting Secure Global Desktop server (version 4.40.917). Please wait...
javax.naming.NameNotFoundException: asad.properties [Root exception is java.io.FileNotFoundException: /opt/tarantella/var/serverconfig/global/beans/asad.properties]
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.sco.jndi.toolkit.provider.SimpleContinuation.getSimpleException(SimpleContinuation.java:62)
at com.sco.jndi.toolkit.provider.SimpleContinuation.getSimpleException(SimpleContinuation.java:82)
at com.sco.jndi.toolkit.provider.ToolkitContext.namingException(ToolkitContext.java:386)
at com.sco.jndi.toolkit.provider.ToolkitContext.namingException(ToolkitContext.java:401)
at com.sco.jndi.toolkit.provider.ToolkitContext.nameNotFound(ToolkitContext.java:436)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.io.FileNotFoundException: /opt/tarantella/var/serverconfig/global/beans/asad.properties
at com.sco.jndi.provider.file.FileCacheObject.<init>(FileCacheObject.java:62)
at com.sco.jndi.provider.file.FileCacheObject.<init>(FileCacheObject.java:39)
at com.sco.jndi.provider.file.FileCache.lookup(FileCache.java:83)
at com.sco.jndi.provider.file.FileCache.lookup(FileCache.java:68)
at com.sco.jndi.provider.file.FileContext.child(FileContext.java:612)
at com.sco.jndi.provider.file.FileContext.f_lookupLink(FileContext.java:889)
... 12 more
java.io.IOException: Failed to load all Beans : javax.naming.NameNotFoundException: asad.properties [Root exception is java.io.FileNotFoundException: /opt/tarantella/var/serverconfig/global/beans/asad.properties]
at com.sco.tta.server.server.JServer.<init>(JServer.java:327)
at TTAServer.run(TTAServer.java:391)
at java.lang.Thread.run(Thread.java:619)
bash-3.00# /opt/tarantella/bin/tarantella status
Array members (1):
- penguin.everett.nl (primary): NOT ACCEPTING CONNECTIONS.
bash-3.00#

Why do I keep getting a connection error when trying to connect to SQL?

Environment:
LiveCycle ES2
Windows Server 2008
JBOSS
Oracle Application DB
When trying to connect to SQL, I get this error message in the log.
Exception: Could not create connection; - nested throwable: (java.lang.UnsupportedOperationException: Java Runtime Environment (JRE) version 1.6 is not supported by this driver. Use the sqljdbc4.jar class library, which provides support for JDBC 4.0.); - nested throwable: (org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (java.lang.UnsupportedOperationException: Java Runtime Environment (JRE) version 1.6 is not supported by this driver. Use the sqljdbc4.jar class library, which provides support for JDBC 4.0.))
I have these two files located in \\jboss\server\lc_oracle_cl\lib
sqljdbc.jar
sqljdbc4.jar
I was told all I needed to do was drop these two files in the directory above and restart JBOSS. Is there something I'm missing?
Jesse

Hi Jesse,
The driver you are using is for SQLServer Database. Since you are using Oracle as your database, you need an oracle driver.Please copy ojdbc6.jar from the [installDir]/lib/db/oracle/ directory and try again.
Thanks,
Ruchi

Sql Server Web Edition Reporting Services errors when trying to connect to Windows Azure SQL

I am using a preconfigured image from the Azure VM Gallery to create a VM.
--> Sql Server 2012 SP1 Web running under Windows Server 2008 R2
After configuring Reporting Services I get the following error when trying to run a report that connects to my Azure SQL db.
An error has occurred during report processing. (rsProcessingAborted)
An attempt has been made to use a data extension 'SQLAZURE' that is either not registered for this report server or is not supported in this edition of Reporting Services. (rsDataExtensionNotFound)
On the VM using SSMS I can connect to the Azure SQL db. On the VM in Report Builder when I define a connection I get a similar error to the one above when I test that connection. I am using Microsoft Azure SQL as the data source type.
Interestingly in Report Builder, if I proceed past the connection definition, I can see the tables from my Azure SQL db in the dataset definition page.
One more note. If I use a different image from the Gallery (Sql Server 2012 Standard SP1 on Windows Server 2012) my report builder connection works and the reports run fine. I believe that the Azure documentation says that Sql Server Web edition
is an acceptable choice for the SSRS on VM for reporting.
Any thoughts or suggestions?
Thanks -- Tom Reilly

Hello,
A VM with SQL Server 2008 R2 or 2012 supports all Reporting Services features, including all supported data sources, customization and extensibility, and scheduled report execution and delivery.
Did you run the report in Report Manager,or preview the report in Report Builder? Which version of the Report Builder you installed in the Windows Azure VM? SQL Reporting does not support reports created from Report Builder 1.0 or 2.0. You can create reports
using Report Builder 3.0 and then upload the reports.
What's more, please also check the database source credential of the report.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Error when trying to connect in synch manager

Hi there,
When trying to connect to an administration in synch manager, an error appears: SBO Error #-111: Failed to Connect to SBOCommon
System:
SAP Business One 2007A PL42
SQL Server 2005
SAP Webtools 2007 PL 13
Kind regards,
Andy Grootens

Hello Andy,
Can you log in to this instance of business one normally?
Did you set the username and password to connect in the synch manager?
Have you recently changed the users password?
James

'500 Internal Server Error' when trying to connect to Music Store

Does ANYBODY at Apple CARE that I've been writing posts for 2 WEEKS trying to get an answer to the reason why I can't connect to the Music Store? This is absurd!
Since upgrading to iTunes 6.0.3 (and now 6.0.5), I get a 'Music Store termporarily unavailable' message. I have the same PC, OS, and ISP that I've used to buy hundreds of dollars worth of your music - but since upgrading - I'm dead in the water. Norton is set to PERMIT i-tunes - but I get the same problem with Norton turned OFF.
When trying to connect to the Music Store via the following URL: phobos.apple.com/WebObjects/MZStore.woa/wa/storeFront
as suggested in other posts, I get a "Error 500 Internal Server Error" - which according to my ISP and Microsoft is on APPLE'S Server - not my end.
HELP HELP HELP!!!!
Dell Windows XP Pro
Dell Windows XP Pro

Check whether your DBControl or ASControl service is still running or crashed. EM is not able to connect to the Management Server.
For instance in Windows, you may see that the Servise is not started. Then check for error logs in $ORACLE_HOME/sysman/logs for any related error messages in the log files

Ive got data on my phone and its keep saying network error when trying to connect

Im trying to connect to internet when im out and about ive got data on my phone but it keeps saying network error when trying to connect

Hi there,
You may want to take a look at some of the troubleshooting steps found in the article below.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
-Griff W.

Logon Failed - Invalid element error when trying to connect to SalesForce

I had a working crystal reports database connection to salesforce until I installed a Crystal Reports update on my machine. It is currently running v12.2.0.290 (CR Developer).
Since the update when trying to connect, I enter my password and salesforce security token to get access to the database but now I receive an error that says:
Logon Failed
Details: Unexpected error
; nested exception is
org.xml.sax.SAXException: Invalid element in com.sforce.soap.partner.LoginResult - metadataServerUrl
Help is resolving this error would be appreciated.

Hi Ron -- you have installed SP2 of Crystal Reports 2008. You will need to install the FP 2.2 as per this thread -- Crystal Reports 2008 SP2 update to the Salesforce.com connectivity
Let us know if this solved your problem.
Thanks,
Pete

DNS Error when trying to connect xbox360 to WRT54G wireless network, Please help!!

Similar Messages

Maybe you are looking for