DNS GUI will not display Zone entries

Hi
I have an Apple Intel Xserve running 10.5.8
I have added hundreds of entries into our DNS using the GUI
I have just tried to add a new CNAME
Server admin then "stopped responding" - I used force quit to kill off the application
Now when I launch ServerAdmin DNS - I click on the disclosure triangle next to my zone name and nothing is displayed
If I look at /var/named/zones/db.mycompany.co.uk.zone.apple
all the entires are there
I can even see the CNAME entry I added, but this will not respond when using nslookup
although existing entries still do respond as usual
I can see nothing in the logs to indicate why this is occuring
Can anyone give me some ideas as to why this be happening and more importantly how to fix it.
I have to use the GUI because there are colleagues who work on this when i am not here and they are not familiar with the command line.
Regards
Tony

Make a copy of the zone file and then try editing the original so tabs and carriage returns "looks the same" on the last line as on the last few lines before it. Or just try removing the last line (if the CNAME is there). In the GUI in SA shift between the DNS and some other service to "revive" it (reread the data).

Similar Messages

  • Flash appears to install on Win 7, IE 8but will not display

    32 bit Windows 7
    IE 8, 32 bit
    FP 10.2.152.32
    FP S/W installation windows indicate that FP installed (Download Manager also says so)
    FP & Download Manager are both shown in Programs.
    History: Few weeks ago system was severely corrupted even though had McAfee Viruscan and Webroot Spysweeper. It was indicated every time an attempt to look at a video was made wherepon the computer would shutdown a few seconds afterwards. Working w/ Dell Support they determined the system was too far corrupted to save (7000+ files corrupted!!). They suggested that it would be preferable to install W 7 to replace then current XP operating system. Had disk formatted and XP operating system re-installed but only sufficient to  allow operation of email. When Windows 7 arrived fully installed along w/ new Word/Excel 2010 S/W. Retrieved backuped files successfully. Everything is operating OK except for FP. Every attempt to load (after repeated uninstalls) shows it to be "successful" but still won't allow videos to play.
    Based on perusal of thread, opened register to check on "kill-bit", found no indication it was set.
    What should I do next?

    From: eidnolb <[email protected]>
    Subject: Flash Player Flash appears to install on Win 7, IE 8but will not display
    Date: Friday, March 11, 2011, 7:32 PM
    Hi, what a terrible experience to have to go thru! I hope you don't still have either one of those "Anti-Virus" programs on your system. If not, what Anti-Virus/Spyware program(s) do you have?
    Yes it was terrible, but Dell (Solution Station, paid support) made this sickening experience bearable. Right now I have McAfee Total Protection 2011 for what it's worth (ya gotta have something) and I use Malwarebytes Anti-Malware (free version) twice a day to scan. The only thing it finds repeatedly is something in the registry defined as : HKEY_CLASSES_ROOT\regfile\shell\open\command\...
    So I can understand this, you now have Win7 on the computer? The backup files are from the XP that had the 7000 corrupted files?? When you reformatted XP, weren't those files lost? I guess what I need to know is how did those files get Installed onto the Win7 OS?
    Here's the sequence of events: I back up periodically with a WD My Book Essentials external drive, assuring that the system is as clean as I can get it and otherwise operating normally. I don't do it continuously for fear that I could be backing up corrupted files right up to the point the disk crashes The back up that was used was about six weeks old. The 7000+ corrupted files were cleaned before reformatting but would have been lost regardless when the disk was reformatted. After it was reformatted and before installation of W7, the  Dell reinstallation disk for XP was used. No backup files were loaded on this temporary XP system. When the W7 system was installed these backup files from the external drive were cleaned with Malwarebyes which found about 20 corrupted files. Since then only two have regularly appeared , they are in the registry defined as: HKEY_CLASSES_ROOT\regfile\shell\open\command\def...
    Also why wasn't the malware cleaned before reformatting?
    As indicated above, it was cleaned but never used again since it was all lost with the reformatting. The reinstalled software came from a six week old backup which has worked well and shows none of the malware, except for the few Malwarebytes intially found.
    One other thing, I revisited the "kill-bit" procedure. While I didn't find what you indicated, I did find these two entries with HKEY_LOCAL_MACHINE\SOFTWARE\ :
          Name                        Type                    Data
    "icon w/ab in it"             REG SZ            (value not set)
    "icon w/ab in it"             REG SZ            application/x-shockwave-flash
    Also, I was looking at your procedure in post #26, in response to jfirko where a vs 9 of FP is installed/uninstalled followed by the current version of FP. For my situation is this a worthwile approach?
    By the way, thanks for your interest in solving these problems. So many programs now use the flash player but there are so few sources to turn to when problems occur.     

  • Satellite A300 PSAG0A - Games Will Not Display in Full Screen Size

    I have a large number of games installed on my computer. At least 90% of them will not display in full screen size but display in a small window with a large amount of black screen surrounding the window. I am running Windows Vista Home Premium 32 bit. However, I do not think it has anything to do with Windows as my husband runs the same games on his Toshiba Satellite L300, running exactly the same version of windows, and they all display in full screen size.
    Altering the screen resolution makes no difference. And, of course, I do select the full screen option in the games.
    Also, sometimes when I have been playing a game and then closed it I find that my desktop picture has shrunk to the smaller size - the same size as the window in which the game was displayed when I was playing it.
    The games work fine in every other way, it is only this small screen size which is driving me nuts.
    I hope that someone can help me with this!!

    Yes, as far as I can tell I have the latest driver. But, even this is confusing to me because....
    My graphics media accelerator is Mobile Intel(R) 965 Express Chipset Family. The installed driver version is 7.14.10.1329. The release date for this is 2007-09-13, as far as I can tell from web searches.
    However, on the Toshiba website for driver downloads, the available driver version is 8.2.0.1012 PV. The date is 2006-12-28. I have downloaded this driver and attempted to install it. I get the message that it has been installed but, after rebooting and checking the installed driver version is still 7.14.10.1329.
    Perhaps, the 8.2.0.1012 PV version does not actually install because it is older than the currently installed version. I would have thought that the driver version with the higher number would be the newer one, but perhaps this is not the case as the dates do not seem to support this theory.
    So now I ask myself, firstly, if the driver available for download on the Toshiba website is not the newest one, then why is it there?
    Secondly, if it is the newest one then why will it not install on my computer?

  • The menubar will not display in full screen

    Hi.
    I have a strange problem in fullscreen mode, on my Macbook pro 15"
    I LOVE fullscreen, and infact the next macbook I will get is the 11" air because of its size and because full screen is so nice to work with.
    But I have a strange problem which I can't find a solution for.
    Suddenly the menubar will not display it self when I move the mouse to the top of the screen. The only way I can access the menu bar is by exiting full screen (ctrl + Cmd + F) and the toggel it back on after I have used the menubar
    This actually makes fullscreen mode useless and its driving me nuts, because this should not happen on Apple software. I would expect these sorts of behaviour on windows but not in osx.
    Anybody have a hint about what to do?

    https://discussions.apple.com/thread/3881124?start=0&tstart=0     <<<<< GO THERE
    Try this:  make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.

  • I was recently sent a very large emoji message amd now when i try to acces messages it will not display mesagges and then will bring me back to the home page

    was recently sent a very large emoji message amd now when i try to acces messages it will not display mesagges and then will bring me back to the home page

    Quit the messages app and reset your phone.
    Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it jiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally. Then reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart.
    After the phone restarts go into Messages and delete the thread containing the problem message.

  • Newly created images will not display in Firefox 8 for Mac. Same images appear in other browsers. Why?

    1. Specific new images are uploaded but will not display in Firefox 8 on my Mac with OS 10.6.8. (Does appear in other browsers, e.g., Chrome and Opera, and appears on Firefox 8 for PC.) Also, other images on the page display.
    2. I have cleared cache, cookies, etc., in Recent History, and restarted both application and computer.
    3. I've tried creating GIF, JPG and PNG, but none show on the page in Firefox on my Mac. I can see the offending image in other browsers such as Chrome on the same computer, and on Firefox on PC. Offending pages are in both PHP and HTML: http://www.brookfieldcivic.org/advertisers.php and http://www.brookfieldcivic.org/advertising_freedom_montessori.html
    Image links: http://www.brookfieldcivic.org/images/advertisers/freedom.png and http://www.brookfieldcivic.org/images/advertisers/Freedom_Montessori_bizcard.jpg

    You can use these steps to check if images are blocked:
    *Open the web page that has the images missing in a browser tab.
    *Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
    *Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
    *Go to the <i>Media</i> tab of the "Tools > Page Info" window.
    *Select the first image link and scroll down through the list with the Down arrow key.
    *If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

  • Firefox will not display on the screen even though with Process Explorer I see Firefox.exe active but no CPU usage

    I use Firefox v10.0.2 as default browser on Dell XPS8300 e/w Intel Core i5 & Windows 7 Ultimate and Compaq Presario CQ57 e/w Intel Core i3 & Windows 7 Home. More frequently on the (about 90% of attempts) than the Dell (50% of attempts) Firefox will not display to the screen when I click on icon. When it happens I cannot display other programs. I specifically say display because I believe Firefox has started. To circumvent the problem I installed Process Explorer on both machines and start this program first then click on Firefox icon. When problem occurs I can see Firefox.exe process in Process list; some CPU consumed but, then, no CPU activity. If I click on Firefox icon again another process opens in Process list but with same response - some CPU consumed and then no CPU activity. If I have 2 processes running and kill the 1st process, the 2nd will display and everything from then on is normal. If I do not open a 2nd process but kill the 1st process then click on Firefox icon Firefox is displayed and everything from then on is normal. This problem has occurred since original installation on both new machines. I've updated video drivers in both machines.

    Ok, let's see if we can fix this and get it working for you!
    First, if you start Firefox in [[safe mode|safe mode]] (restart your computer first, then when you open Firefox, hold down the shift key) does it start up more reliably? This is usually caused by a faulty add-on. If it does help, then restart Firefox, go into the Firefox button, then add-ons, and disable your extensions one by one until you find the trouble maker.
    Also, try updating to Firefox 11, it has several bug fixes that might make life easier here.
    Just as a few basic troubleshooting steps to make sure we have all the bases covered,
    Run all Windows Updates, install all needed service packs, etc.
    Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
    Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. you can uninstall this program after you clean off any infections.

  • Updated to the latest revision. Firefox will not display my chosen home page without clicking on home icon.

    Since latest update...Firefox will not allow a new page to be opened from a link in a current page. It will allow a new tab to be opened (with tabbed browsing checked) but i prefer a new page. Even in tabbed browsing links to things like a pdf will not work at all.
    Firefox WILL NOT close. X-ing out will close the window but I can not get back to Firefox without closing it in task manager.
    Firefox will not display my chosen home page without clicking on home icon.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I just installed Yosemite.  Notifications Center will not show ICal entries that were on my ICal at time of installation.  How do I get events to show in Notification Center?

    I just installed Yosemite.  Notifications Center will not show ICal entries that were on my ICal at time of installation.  How do I get events to show in Notification Center?

    Submit your feedback requesting this feature directly to Apple using the appropriate link on the Feedback page:
    http://www.apple.com/feedback

  • Adobe Illustrator file will not display correctly when logged in as a user

    I am working with an Adobe Illustrator CS2 file that will open and display correctly if I log in as Administrator, but will not display correctly if I am logged on as a user. The error message is that there is not enough memory to display the file correctly and I am forced into preview mode. The user Home folder is on a server. Other than this, I have made certain that the criteria for opening the file match under both interfaces. I have opened the AI CS2 file on other Macs and it opens fine. I conclude that the problem is with the user Home folder, but beyond that, I'm stumped. Any help will be appreciated.

    After I filed a bug-report an Apple engineer contacted me, and asked me to try running java in headless mode: http://java.sun.com/developer/technicalArticles/J2SE/Desktop/headless/
    That solved the problem!

  • Photos show up as thumbnail but when I click on them they will not display

    Photos show up as thumnails but when I click on them they will not display. I get a exclamation mark in a dotted line box

    Hylan:
    That occurs when the library has lost the link to the original file. This is a result of a damaged library database file, Library6.iPhoto. You can try rebuilding the library from within iPhoto to see if you can recover the photos by launching iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options. However, it's iffy.
    You can rebuild the library with iPhoto Library Manager as it create a new library, leaving the original one intact, by reading the AlbumData.xml file and copying what it needs. You will be able to recover the photos, albums, keywords, titles and comments. However, books, slideshows, and calendars will not be recovered. Here's how:
    Using iPhoto Library Manager to Rebuild Your iPhoto Library
    1 -Download iPhoto Library Manager and launch.
    2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
    4 - In the next window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: It may take some time to create the new library if you have a lot of photos. Report back on how long it took and how many photos you have in the library so we can give other users an idea of how long it may take.
    It that doesn't work you'll have to start over with a new library and import the Originals folder from the old library as follows:
    Creating a new library while preserving the Events from the original library.
    Move the existing library folder to the desktop.
    Open the library package like this.
    Launch iPhoto and, when asked, select the option to create a new library.
    Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
    This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Edit Photo dialog box will not display

    When I select edit in CS5 my file goes straight to CS5 and my edit in the dialog box will not display. I have no way to oprn with a copy or etc with out the  edit dialalog box.
    Iam using LR 4 latest version I must have changed some thing no realizing . Everthing was fine until a while ago.
    All the NEF files that were recently imported are the ones that the dialog box will not show the TIF files the dialog box will show.
    When these files were ompoterted all the history does not show in the module just the import. Did I import wrong causing all the history not to show??
    Thank you
    Dick
    Message was edited by: [email protected]
    Message was edited by: [email protected]

    Hi Dick,
    That sounds like normal behaviour with Raw files to me. They usually go straight through the Camera Raw pipeline into Photoshop. Rendered files like Tiff and Jpeg have the Original/Copy/Lightroom Adjustments dialog.
    I'm not sure what you mean by History because on Import, there is only one history state: Import.
    Sean

  • Emoticons Will not display with new version

    Downloaded the new version, and now the (finger) and (wtf) emoticons will not display. Every single other one does display. Why is this happening? I have tried restarting my computer,  and redownloading Skype itself. Is there any way to fix this? I know I have the emoticons display on because every one BUT those ones work. 
    Attachments:
    Capture1.JPG ‏16 KB

    These hidden emoticons indeed got removed with 6.14 because of them or their shortcodes having the potential to offend some users. Here's some feedback from users wanting it back, so feel free to show your support there if you are passioante about them: http://community.skype.com/t5/Windows-desktop-clie​nt-Ideas/Restore-6-13-set-of-emotes/idi-p/2958795
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Safari will not display pdf files since installing OS 10.8.2

    Safari will not display pdf files uner Lion 10.8.2

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • PDF will not display in an IE browser window

    I have the following setup:
    Windows Vista Business w/ SP2
    Internet Explorer 8 (8.0.6001.18813)
    Adobe Reader 9 (9.1.3)
    When accessing a PDF document using IE8, the PDF will not display in an IE browser window.  Instead, the PDF opens in a new Adobe Reader window.
    When accessing the same PDF in Firefox or Chrome, the PDF appears in the browser window.
    I have tried repairing Adobe Reader using the Help>Repair Adobe Reader Installation menu, both by running Adobe Reader as an admin and not.  I have confirmed that Adobe Reader "Internet" preference "Display PDF in Browser" option is enabled (checked).  I have enabled/disabled this preference without affect.  The PDF document is always opened in it's own Adobe Reader window.
    I have tested this using different PDF documents served up by different servers.  The result is the same.  The PDF document is always opened in it's own Adobe Reader window.
    How can I get the PDF to open in an IE8 browser window?
    I look forward to any suggestions offered.

    Hi Carolyn,
    I am experiencing the same symptoms as gaijindragonslayer described above, and my Internet Plug-ins folder is empty. I would like to have Preview as my default pdf reader, but am unable to view a pdf in Safari at all right now -- I have to download the pdf and then open it with Preview separately in order to view it.
    What else might cause this?
    Thanks for your help.

Maybe you are looking for