DNS host name for virtual IP on WLC 5760?

Hi all,
Does anybody of you know, if there is a way in setting a DNS hostname for the virtual IP on the 5760 WLC?
The parameter-map does not offer any option.
AireOS based WLCs do offer it in order to see a DNS name instead of the virtual IP when connecting to the captive portal.
Thanks in advance,
Patrick

Hi Stephen/Patrick,
Can you try and confirm if below works?
Switch(config)#parameter-map type webauth global
Switch(config-params-parameter-map)#virtual-ip ipv4 1.1.1.1 ?
virtual-host Virtual host name
Switch(config-params-parameter-map)#virtual-ip ipv4 1.1.1.1 virtual-host
Regards,
Ankur

Similar Messages

  • Getting ipaddress or host name for virtual server

    I want to get the ipaddress or host name for virtual server in a cluster environment. If i do
    java.net.InetAddress.getLocalHost().getHostName()
    it returns the ipaddress of the physical node currently running virtual server.
    Is there any way to get the ipaddress or host name for virtual server ?

    You can get the hostname by clicking on the account properties in outlook, but the port you connect to must be opened by your system admin.

  • DNS host name under virtual interface??

    Hi,
    Can anyone tell me what is the purpose of DNS hostname under the virtual interface? Is it a required parameter for web-authentication / how does it affect the web authentication?
    Thanks in advance
    Jino

    The host name under the virtual interface is for if/when you put a third party certificate in the WLC. When you register for the cert, the name you put under the virtual interface is what you use for the cert.
    Steve
    Sent from Cisco Technical Support iPhone App

  • Virtual Host Name for CM

    Hi ,
    R12.1.3 & 11gR2 DB
    I have a qucik question . When We have Virtual Host Name for setting , What Should be the node name for ICM in Concurrent Manager Admin form.
    In One of our Instance : For ICM & Other Manager , its Virtual Host Name
    For Other : ICM : Physical Host Name & Other Manager Virtual Host Name .
    Which is good. We having a issue with ICM on both Nodes , in every minutes is going down and come up automatically.
    Regards
    Sourabh Gupta

    Hi Hussein,
    Thanks a lot. I have already review these document.
    Is Auto Failover With Virtual Hostnames For Concurrent Processing Servers Supported In 11i Or R12? (Doc ID 456540.1)
    Adding an Alias Hostname with Oracle E-Business Suite Release 12 (Doc ID 603883.1)
    Concurrent Processing - CONC-SM TNS FAIL In Internal Concurrent Manager (ICM) Log File With Virtual Hosts Configuration [ID 961216.1]
    ICM Not Starting: Node Name not Registered [ID 602942.1]
    I am curious what should be the node name in concurrent manager Administrator form.
    W ether is should be the virtual host name or physical host name.
    I have just checked with few people , Some Says ICM node name should be Physical server name & Other CM name can be Virtual name. I am not sure on what basis people are saying.
    Few says node name should be the physical host for every CM.
    Note Sure what is correct & best configuration.
    Regards
    Sourabh GUpta

  • Error on node PATHRAC2:rshd: 0826-826 The host name for your address is not

    Dear Team,
    As am installing oracle rac on aix 5.3 tl 11 also done with precheck working fine..
    user equilvalenec---done
    pacakages ---- done
    ssh --- done
    but while installtion at end while copying its raise error
    Error on node PATHRAC2:rshd: 0826-826 The host name for your address is not known. :failed]
    f.y.i ssh woting then also
    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.08.15 12:55:50 =~=~=~=~=~=~=~=~=~=~=~=
    ssh PATHRAC1
    Last unsuccessful login: Thu Aug 12 18:39:35 IST 2010 on ssh from 10.16.5.204
    Last login: Sun Aug 15 12:55:26 IST 2010 on /dev/pts/5 from pathrac1.icicilombard.com
    * Welcome to AIX Version 5.3! *
    * Please see the README file in /usr/lpp/bos for information pertinent to *
    * this release of the AIX Operating System. *
    PATHRAC1-> exit
    logout
    Connection to PATHRAC1 closed.
    PATHRAC1-> ssh PATHRAC1 2
    Last unsuccessful login: Tue Aug 10 17:44:34 IST 2010 on ssh from 10.16.4.121
    Last login: Sun Aug 15 12:53:21 IST 2010 on /dev/pts/2 from 10.16.5.204
    * Welcome to AIX Version 5.3! *
    * Please see the README file in /usr/lpp/bos for information pertinent to *
    * this release of the AIX Operating System. *
    PATHRAC2-> exit
    logout
    Connection to PATHRAC2 closed.
    PATHRAC1-> ssh PATHRAC2 PATHRAC1-vip
    PATHRAC1-> ssh PATHRAC2-priv
    Last unsuccessful login: Thu Aug 12 18:39:35 IST 2010 on ssh from 10.16.5.204
    Last login: Sun Aug 15 12:55:52 IST 2010 on /dev/pts/5 from pathrac1.icicilombard.com
    * Welcome to AIX Version 5.3! *
    * Please see the README file in /usr/lpp/bos for information pertinent to *
    * this release of the AIX Operating System. *
    PATHRAC1-> exit
    logout
    Connection to PATHRAC2-priv closed.
    PATHRAC1-> ssh PATHRAC2-priv[1P[1@1
    Last unsuccessful login: Tue Aug 10 17:44:34 IST 2010 on ssh from 10.16.4.121
    Last login: Sun Aug 15 12:55:56 IST 2010 on /dev/pts/3 from 10.128.120.237
    * Welcome to AIX Version 5.3! *
    * Please see the README file in /usr/lpp/bos for information pertinent to *
    * this release of the AIX Operating System. *
    PATHRAC2-> exit
    logout
    Connection to PATHRAC1-priv closed.
    PATHRAC1->
    please help
    Regards
    Upendra
    9820011875

    Hi,
    1. Please check you hostname for both node
    # hostname
    2. Check the hostname exist in /etc/hosts. Public,Virtual,,Private
    3. Re-check your ssh. Test the ssh
    PATHRAC1 > ssh PATHRAC1 hostname
    PATHRAC1 > ssh PATHRAC2 hostname

  • What are the userid,password, and host name for oracle 9i?

    HI Guys.
    I am a research student at the University and the I recently downloaded Oracle 9i for my research. But the problems is also with seting it up. Please could you show me the userid, password, and host name for oracle 9i.
    Thanks in advance for your cooperations.
    Malinga R
    [email protected]

    I believe that starting with 9.2, you have to specify different passwords when you install (can't be the default).
    Justin

  • DNS Host name problem

    Hi, I am a newbie to AS. Nice to join the family and meet u all.
    I got some problem during installation of AS 2005Q2, when I install and select 'Config Now' option, I cannot pass since the DNS hostname always fail.
    If I select 'Config Later', I will find something is missing, like asadmin tool is not avaiable.
    Since I will use the Ip only, can I disable or bypass the DNS host name? since no matter how I enter it always fail.
    Please advise, thank you very much in advance. :)

    Hi, I am a newbie to AS. Nice to join the family and meet u all.
    I got some problem during installation of AS 2005Q2, when I install and select 'Config Now' option, I cannot pass since the DNS hostname always fail.
    If I select 'Config Later', I will find something is missing, like asadmin tool is not avaiable.
    Since I will use the Ip only, can I disable or bypass the DNS host name? since no matter how I enter it always fail.
    Please advise, thank you very much in advance. :)

  • Local node not included in the list of host names for grid installation

    I'm attempting to install clusterware on Solaris 11 on 2 nodes. I've tried tweaking the /etc/hosts file in a few different ways by including the fully-qualified name and without it for the localhost, but it still gives me this error every time. The runcluvfy.sh script doesn't run on Solaris 11. Does anyone know how to get around this problem?
    I've tried this using the silent install and with OUI, but got the same error both ways. This is the format of the node names:
    oracle.install.crs.config.clusterNodes=myLocalNode:myLocalNode-vip1,myOtherNode:myOtherNode-vip2
    [FATAL] [INS-40907] Local node not included in the list of host names for grid installation.
    CAUSE: The local node (the node where you are running the installer) was missing from the list of host names you provided.
    ACTION: Include the local node in the list of host names for grid installation.
    Edited by: 982828 on Jan 18, 2013 1:18 PM

    Hi,
    what Oracle Version are you trying to install?
    Best to directly start with 11.2.0.3 and look in MOS for certification, hints requirements.
    Regards
    Sebastian

  • DNS Domain Name for SAP System

    Hi,
    I am installing BI7.1 , it is asking for DNS Domain Name for SAP System.
    What to give i dont know please some one help
    Thanks,
    Jack

    Hi,
    Pls chk this link;
    http://en.wikipedia.org/wiki/Domain_name_system
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/994a06ed-0c01-0010-878b-e796a9060209
    Regards
    CSM Reddy

  • Host name for OMS

    I have Oracle 9i Database installed
    When I log into the oracle management server in OEM,
    I don't know the <host name> for the Management server
    where do I get this info?
    I am getting the default of my ISP address!

    Try going to an OS command prompt and use the oemctl command to find the status. Go to the link I posted earlier and use your browser's find function to search for oemctl. Since it is on your local machine, use the local command, you shouldn't need a hostname (though multiple oracle homes can happen and be very confusing).
    Can't say as I remember much else on your old version, I second the suggestion to use more recent things.

  • Custom host-name for web application SharePoint 2010

    I am facing a weird behavior. Can anyone help me regarding this?
    Steps performed:
    1. Created a web application using custom host name.
    2. Created a site collection using "Blank" site template. Nothing issues.
    3. Created another site collection using "Publishing" site template. Authentication prompt came multiple times. IIS logs/Fiddler/HTTP Watch are full with 401 entries.
    4. Added the custom host-name with web server IP in local desktop hosts file(which is in intranet domain). Prompt issue fixed.
    5. Authentication mode set as NTLM. 

    Hi DDasgupta,
    After you created a web application with a custom host name, if you got a prompt for the user and you may face the following issues:
    There is continuous prompt for the credentials
    HTTP 401.1 error
    This shows that there is a problem with the Loopback configuration. This situation should occur only when we access the application from the server machine.
    For fixing the problem, we have to disable the Loopback value inside the registry.Open the Registry Editor (regedit.exe) and locate the following key:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa, and create a new Key Value of type DWORD inside
    it and set the value to 1.
    More information, please refer to the link:
    http://www.c-sharpcorner.com/UploadFile/40e97e/sharepoint-2010-creating-host-name-for-web-application/
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • How can IC WebClient determine the host name for free seating?

    Hi,
    I want to determine the host name at CRM application server by ICI interface for free seating scenario.
    There is a TCODE CRMM_IC_GFS to set 'Host Name Identification Applet'.  But when I check on it, all buttions in IC Webclient disappeared. I followed the note 812399 to change Java security configuration, but the synptom still exist. Do anybody now how to? Thanks!
    BR,
    Hao

    To run a public VPN server, you need to do the following:
    1. Give the gateway either a static external address or a dynamic DNS name. The latter must be a DNS record on a public DNS registrar, not on the server itself. Also in the latter case, you must run a background process to keep the DNS record up to date when your IP address changes.
    2. Give the VPN server a static address on the local network.
    3. Forward external UDP ports 500, 1701, and 4500 (for L2TP) and TCP port 1723 (for PPTP) to the corresponding ports on the VPN server.
    4. Configure any firewall in use to pass this traffic.

  • Change DNS host name automatically when one device is down

    Hi all
    I am first copying below the question which I have posted in a thread related to DNS few days back .
    You cannot vote on your own post                    
    Hi
    our network team has setup Bluecoat proxy server in our main office and DR site . We have configured GPO to populate the details of proxy server hostname in the proxy setting  eg : Proxy server .  IP1 is the IP address for the device in Head office
    and IP2 is the IP address assigned for device in DR site. currently  we have given a DNS entry as
    Proxyserver - IP1.
    So DNS resolves the IP address of device in Head office and authentication and internet access works.
    But we want to use the DR device  to be used automatically   (only )when head office device is not reachable. But how to configure the settings for DNS I am not sure.
    I don't want to use round robin as it will send the traffic to both head office and DR in a load balancing fashion .
    for this request I had received an advice to use a script to monitor the first device continuously and if not reachable  then change the Hostname in DNS to that of second device  .
    Let me know if anyone can help me on this.
    Thanks in advance
    Midhin 

    Hi Midhin,
    Agree with Jrv, I also recommend you can consult proxy vendor for a better solution.
    In addition, if you still want to update host name in DNS via Powershell, please refer to the script to update A record in DNS:
    $Zone = "dns zone"
    $oldobj = Get-DnsServerResourceRecord -ZoneName $Zone -RRType "A" -Name "hostname"
    $newobj = Get-DnsServerResourceRecord -ZoneName $Zone -RRType "A" -Name "hostname"
    $NewObj.RecordData.IPv4Address = "newipaddress"
    Set-DnsServerResourceRecord -NewInputObject $NewObj -OldInputObject $OldObj -ZoneName $Zone
    If there is anything else regarding the powershell script issue, please feel free to post back.
    Best Regards,
    Anna Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • MI424WR - DNS Host Name Resolution

    I have added several DNS entries in the DNS Server section of the MI424WR. These are for my network printer, and I have renamed several Android devices to give them names. When I try to ping any host name that I added to the DNS Server section it does not resolve.
    How can I rectify this?
    Thanks,
    Steve

    Are your machines using the DNS Server/Relay in the ActionTec, or are they set to use External DNS Servers? An ipconfig /all readout from the command prompt will tell you this information.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • How to check the Datasource name for Virtual cube

    Hello Experts,
                          I have a report which is built on one multiproviider for which we are getting balance sheet data reporting on company code,enduser told us that he wanted to  see the data on plant level...
    The problem here is that I have checked the data flow for the multiprovider,It is showing as getting data from virtual cube.
    So,from there It is not showing the datasource and infosource under it(under virtual cube)..so how can I check the datasource name for it,so that I can go and enhance the datasource in case the plant(WERKS) is not there
    thanks
    reddy

    Hi Friend,
    go virtual cube lavel and see the data flow with "downward & upward" option in RSA1
    Go to RSA1
    Select the Virtual cube> right click > display data flow> select "downward & upward"
    it may help you

Maybe you are looking for