DNS just... QUIT
Up until this morning, DNS worked fine. Somehow, DNS simply stopped working. After checking the server, and it showing that DNS is off, I proceed to start DNS again. It attempts to start, but then fails and remains off.
I didn't make any changes, so I don't understand what's going on. Also, I fail to understand why "bloomingdaleshome.com" is appearing on March 24th. All too strange.
In any case, here the log with the hope that someone out there can provide insight and a fix.
Thanks! John
1#53
Mar 22 22:41:58.076 loading configuration from '/private/etc/named.conf'
Mar 22 22:41:59.108 loading configuration from '/private/etc/named.conf'
Mar 22 22:41:59.111 listening on IPv4 interface en0, 71.201.230.61#53
Mar 22 22:42:02.575 loading configuration from '/private/etc/named.conf'
Mar 24 17:00:38.195 lame server resolving 'www.bloomingdaleshome.com' (in 'bloomingdaleshome.com'?): 208.15.91.3#53
Mar 24 17:00:38.308 lame server resolving 'www.bloomingdaleshome.com' (in 'bloomingdaleshome.com'?): 206.228.179.10#53
Mar 24 17:00:40.759 lame server resolving 'www.bloomingdaleshome.com' (in 'bloomingdaleshome.com'?): 208.15.91.3#53
Mar 24 17:00:40.823 lame server resolving 'www.bloomingdaleshome.com' (in 'bloomingdaleshome.com'?): 206.228.179.10#53
Apr 01 16:57:03.870 shutting down
Apr 01 16:57:03.871 stopping command channel on 127.0.0.1#54
Apr 01 16:57:03.873 no longer listening on 127.0.0.1#53
Apr 01 16:57:03.873 no longer listening on 192.168.2.1#53
Apr 01 16:57:03.873 no longer listening on 71.201.230.61#53
Apr 01 16:57:03.877 exiting
Apr 01 17:00:05.654 dnsmasterload: named.local:11: ignoring out-of-zone data (1.localhost)
Apr 01 17:00:05.655 zone 0.0.127.in-addr.arpa/IN: loaded serial 2006032210
Apr 01 17:00:05.658 zone 2.168.192.in-addr.arpa/IN: loaded serial 2006032200
Apr 01 17:00:05.746 zone formatdesigncom.com/IN: loaded serial 2006032209
Apr 01 17:00:05.749 zone localhost/IN: loaded serial 42
Apr 01 17:00:05.749 running
Apr 01 17:00:05.749 zone 0.0.127.in-addr.arpa/IN: sending notifies (serial 2006032210)
Apr 01 17:00:05.752 zone 2.168.192.in-addr.arpa/IN: sending notifies (serial 2006032200)
Apr 01 17:00:15.310 loading configuration from '/private/etc/named.conf'
Apr 01 17:00:15.533 loading configuration from '/private/etc/named.conf'
Apr 01 17:00:15.536 listening on IPv4 interface en2, 192.168.2.1#53
Apr 01 17:00:18.347 loading configuration from '/private/etc/named.conf'
Apr 01 17:00:18.350 listening on IPv4 interface en0, 192.168.100.2#53
Apr 01 17:01:58.730 loading configuration from '/private/etc/named.conf'
Apr 01 17:01:58.733 listening on IPv4 interface en0, 169.254.231.135#53
Apr 01 17:01:58.733 no longer listening on 192.168.100.2#53
Apr 01 17:05:03.804 shutting down
Apr 01 17:05:03.805 stopping command channel on 127.0.0.1#54
Apr 01 17:05:03.928 no longer listening on 127.0.0.1#53
Apr 01 17:05:03.928 no longer listening on 192.168.2.1#53
Apr 01 17:05:03.928 no longer listening on 169.254.231.135#53
Apr 01 17:05:03.937 exiting
Apr 01 17:05:55.316 dnsmasterload: named.local:11: ignoring out-of-zone data (1.localhost)
Apr 01 17:05:55.337 zone 0.0.127.in-addr.arpa/IN: loaded serial 2006032210
Apr 01 17:05:55.340 zone 2.168.192.in-addr.arpa/IN: loaded serial 2006032200
Apr 01 17:05:55.343 zone formatdesigncom.com/IN: loaded serial 2006032209
Apr 01 17:05:55.347 zone localhost/IN: loaded serial 42
Apr 01 17:05:55.347 running
Apr 01 17:05:55.348 zone 0.0.127.in-addr.arpa/IN: sending notifies (serial 2006032210)
Apr 01 17:05:55.350 zone 2.168.192.in-addr.arpa/IN: sending notifies (serial 2006032200)
Apr 01 17:06:06.384 loading configuration from '/private/etc/named.conf'
Apr 01 17:06:06.387 listening on IPv4 interface en2, 192.168.2.1#53
Apr 01 17:06:07.037 loading configuration from '/private/etc/named.conf'
Apr 01 17:06:09.510 loading configuration from '/private/etc/named.conf'
Apr 01 17:06:12.189 loading configuration from '/private/etc/named.conf'
Apr 01 17:06:12.191 listening on IPv4 interface en0, 71.201.230.61#53
Apr 01 17:06:12.608 loading configuration from '/private/etc/named.conf'
Apr 01 17:06:22.266 loading configuration from '/private/etc/named.conf'
Apr 05 12:22:36.475 lame server resolving 'www.harbortides.com' (in 'harbortides.com'?): 192.5.6.34#53
Apr 05 12:22:36.589 lame server resolving 'www.harbortides.com' (in 'harbortides.com'?): 192.31.80.34#53
Apr 05 12:22:36.707 lame server resolving 'www.harbortides.com' (in 'harbortides.com'?): 192.42.93.34#53
Apr 05 12:22:36.819 lame server resolving 'www.harbortides.com' (in 'harbortides.com'?): 192.35.51.34#53
Apr 05 22:25:52.059 loading configuration from '/private/etc/named.conf'
Apr 05 22:25:52.075 dnsmasterload: named.local:11: ignoring out-of-zone data (1.localhost)
Apr 05 22:25:52.076 zone 0.0.127.in-addr.arpa/IN: loaded serial 2006040511
Apr 05 22:25:52.079 zone 2.168.192.in-addr.arpa/IN: loaded serial 2006040500
Apr 05 22:25:52.079 zone formatdesigncom.com/IN: loading master file formatdesigncom.com.zone: file not found
Apr 05 22:25:52.080 zone 0.0.127.in-addr.arpa/IN: sending notifies (serial 2006040511)
Apr 05 22:25:52.084 zone 2.168.192.in-addr.arpa/IN: sending notifies (serial 2006040500)
Apr 05 22:28:02.304 loading configuration from '/private/etc/named.conf'
Apr 05 22:28:02.388 dnsmasterload: named.local:11: ignoring out-of-zone data (1.localhost)
Apr 05 22:28:02.389 zone 0.0.127.in-addr.arpa/IN: loaded serial 2006040512
Apr 05 22:28:02.391 dnsrdatafromtext: formatdesigncom.com.zone:2: near 'NS': not a valid number
Apr 05 22:28:02.392 zone formatdesigncom.com/IN: loading master file formatdesigncom.com.zone: not a valid number
Apr 05 22:28:02.392 zone 0.0.127.in-addr.arpa/IN: sending notifies (serial 2006040512)
Apr 05 22:28:17.210 loading configuration from '/private/etc/named.conf'
Apr 05 22:28:17.320 dnsmasterload: named.local:11: ignoring out-of-zone data (1.localhost)
Apr 05 22:28:17.321 zone 0.0.127.in-addr.arpa/IN: loaded serial 2006040513
Apr 05 22:28:17.322 zone formatdesigncom.com/IN: loading master file formatdesigncom.com.zone: file not found
Apr 05 22:28:17.322 zone 0.0.127.in-addr.arpa/IN: sending notifies (serial 2006040513)
Apr 05 22:28:53.800 loading configuration from '/private/etc/named.conf'
Apr 05 22:28:53.801 /private/etc/named.conf:51: unknown option 'keep_reverse_lookupzone'
Apr 05 22:28:53.801 /private/etc/named.conf:61: unknown option 'keep_reverse_lookupzone'
Apr 05 22:28:53.803 reloading configuration failed: failure
Apr 05 22:29:11.937 loading configuration from '/private/etc/named.conf'
Apr 05 22:29:12.009 dnsmasterload: named.local:11: ignoring out-of-zone data (1.localhost)
Apr 05 22:29:12.010 zone 0.0.127.in-addr.arpa/IN: loaded serial 2006040514
Apr 05 22:29:12.013 dnsrdatafromtext: formatdesigncom.com.zone:2: near 'NS': not a valid number
Apr 05 22:29:12.013 zone formatdesigncom.com/IN: loading master file formatdesigncom.com.zone: not a valid number
Apr 05 22:29:12.014 zone 0.0.127.in-addr.arpa/IN: sending notifies (serial 2006040514)
Apr 05 22:29:37.390 shutting down
Apr 05 22:29:37.391 stopping command channel on 127.0.0.1#54
Apr 05 22:29:37.391 no longer listening on 127.0.0.1#53
Apr 05 22:29:37.392 no longer listening on 192.168.2.1#53
Apr 05 22:29:37.392 no longer listening on 71.201.230.61#53
Apr 05 22:29:37.396 exiting
Nov 11 00:16:47.324 /private/etc/named.conf:48: unknown option 'newid'
Nov 11 00:16:47.344 reloading configuration failed: failure
Nov 11 00:22:36.300 /private/etc/named.conf:48: unknown option 'newid'
Nov 11 00:22:36.300 reloading configuration failed: failure
Nov 11 00:28:30.229 /private/etc/named.conf:48: unknown option 'newid'
Nov 11 00:28:30.229 reloading configuration failed: failure
Nov 11 00:30:49.074 /private/etc/named.conf:48: unknown option 'newid'
Nov 11 00:30:49.075 reloading configuration failed: failure
Nov 11 00:32:00.440 /private/etc/named.conf:48: unknown option 'newid'
Nov 11 00:32:00.441 reloading configuration failed: failure
Nov 12 21:51:58.702 /private/etc/named.conf:48: unknown option 'newid'
Nov 12 21:51:58.703 reloading configuration failed: failure
Nov 16 14:14:14.083 /private/etc/named.conf:48: unknown option 'newid'
Nov 16 14:14:14.083 reloading configuration failed: failure
Nov 16 14:22:12.899 /private/etc/named.conf:48: unknown option 'newid'
Nov 16 14:22:12.899 reloading configuration failed: failure
Nov 16 14:31:50.911 /private/etc/named.conf:48: unknown option 'newid'
Nov 16 14:31:50.911 reloading configuration failed: failure
Nov 16 14:34:52.133 /private/etc/named.conf:48: unknown option 'newid'
Nov 16 14:34:52.133 reloading configuration failed: failure
Nov 16 14:35:07.436 /private/etc/named.conf:48: unknown option 'newid'
Nov 16 14:35:07.437 reloading configuration failed: failure
Nov 16 14:37:04.314 /private/etc/named.conf:48: unknown option 'newid'
Nov 16 14:37:04.314 reloading configuration failed: failure
Nov 17 20:09:57.807 /private/etc/named.conf:48: unknown option 'newid'
Nov 17 20:09:57.807 reloading configuration failed: failure
Nov 17 20:11:03.758 /private/etc/named.conf:48: unknown option 'newid'
Nov 17 20:11:03.759 reloading configuration failed: failure
Nov 17 20:11:34.389 /private/etc/named.conf:48: unknown option 'newid'
Nov 17 20:11:34.389 reloading configuration failed: failure
Nov 17 20:18:39.886 /private/etc/named.conf:48: unknown option 'newid'
Nov 17 20:18:39.886 reloading configuration failed: failure
Nov 17 22:57:29.103 /private/etc/named.conf:48: unknown option 'newid'
Nov 17 22:57:29.103 reloading configuration failed: failure
Nov 17 22:58:18.739 /private/etc/named.conf:48: unknown option 'newid'
Nov 17 22:58:18.739 reloading configuration failed: failure
Nov 18 03:00:46.089 /private/etc/named.conf:48: unknown option 'newid'
Nov 18 03:00:46.089 reloading configuration failed: failure
Nov 18 03:00:47.053 /private/etc/named.conf:48: unknown option 'newid'
Nov 18 03:00:47.053 reloading configuration failed: failure
Nov 18 03:00:50.235 /private/etc/named.conf:48: unknown option 'newid'
Nov 18 03:00:50.235 reloading configuration failed: failure
Nov 18 03:00:54.178 /private/etc/named.conf:48: unknown option 'newid'
Nov 18 03:00:54.179 reloading configuration failed: failure
Nov 18 03:00:54.738 /private/etc/named.conf:48: unknown option 'newid'
Nov 18 03:00:54.739 reloading configuration failed: failure
Nov 18 03:01:02.633 /private/etc/named.conf:48: unknown option 'newid'
Nov 18 03:01:02.634 reloading configuration failed: failure
Camelot, here is (hopefully) the correct listing of the first 50 lines per your instructions. Can you tell where the problem lies (you mentioned line 48 in a recent post)?
sunshine:/private/etc root# head -50 named.conf
// Include keys file
include "/etc/rndc.key";
// Declares control channels to be used by the rndc utility.
// It is recommended that 127.0.0.1 be the only address used.
// This also allows non-privileged users on the local host to manage
// your name server.
// Default controls
controls {
inet 127.0.0.1 port 54 allow {any;} keys {
"rndc-key";
options {
directory "/var/named";
recursion true;
* If there is a firewall between you and nameservers you want
* to talk to, you might need to uncomment the query-source
* directive below. Previous versions of BIND always asked
* questions using port 53, but BIND 8.1 uses an unprivileged
* port by default.
// query-source address * port 53;
logging {
category default {
defaultlog;
channel defaultlog {
file "/Library/Logs/named.log";
severity warning;
print-time yes;
zone "formatdesigncom.com" in {
type master;
file "formatdesigncom.com.zone";
zone "2.168.192.in-addr.arpa" IN {
sunshine:/private/etc root#
Similar Messages
-
In-place upgrade from Server 2012 to 2012R2 "just quits"
I have a TechNet subscription and am supposed to get "priority support" but I mistakenly asked my question in one of the forums that is not in the "priority support monitored" list. Included here by reference:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/bbbb34f2-e098-4f7d-b692-88e033869385/windows-server-2012r2-inplace-upgrade-from-2012-quotjust-quitsquot?forum=winserver2012r2previewsetup
Short description: On the 2012 DataCenter machine which serves as my Hyper-V host, I mount the install media and launch Setup. It starts, copies the temporary files ($windows.~bt) and then just quits.
Content of c:\windows\setupact.log:
2013-10-11 10:29:04, Info UI Determining whether we should run ConX or legacy setup
2013-10-11 10:29:04, Info UI Downlevel OS is server. Continue to run legacy setup
2013-10-11 10:29:04, Info UI Determining if we are in WDS/Unattend mode
2013-10-11 10:29:04, Info UI No need to hide autorun
2013-10-11 10:29:04, Info [0x0a000a] UI Autorun:Autorun core successfully initialized!!!
2013-10-11 10:29:04, Info [0x0a000b] UI Autorun:Autorun UI successfully initialized!!!
2013-10-11 10:29:04, Info UI AppWindow has layout style 0
2013-10-11 10:29:04, Info UI NavWindow has layout style 0
2013-10-11 10:29:04, Warning [0x0a0180] UI Failed to change the UI language to en-US.
2013-10-11 10:29:04, Info [0x0a011c] UI WizardDialogPost::SetActive
2013-10-11 10:29:09, Info [0x0a018e] UI Passing command line parameter ("H:\Sources\setup.exe /HideWelcome /uilanguage:en-US /targetlanguage:en-US") to IBS.
Would appreciate any suggestions that don't involve doing a detailed documentation capture of how the server is configured followed by a clean install, that is what I'm trying to avoid if possible.
I am not trying to do anything special or scripted, just a standard OS upgrade.Hi Pepper, Malort, Robert and Brandon,
I am experiencing the same issue using either new release (april 2014) or the gold release 2012 R2 DVD from Volume license (SA) download. Both confirmed working on other installations. Setup just suddenly quits with the same non existent logs
files in $windows.~bt and c:\windows\setupact.log has a warning statement "Failed to change the UI language to en-US"
The server is running as a vm and would otherwise appear to be running perfectly. It is a DC(GC), DHCP, DNS & CA for my site.
Going to try System Update readiness Tool KB947821-v33.
Heads up MSFP Anne, any word on the cause and/or fix?
Regards,
Andre
Same here,
trying to upgrade a server 2008 R2 server running on hyper-v to server 2012 R2 with update1.
The server was a server 2008 and was upgraded to server 2008 R2.
This is the only log i can found:
2014-07-04 14:20:13, Info UI Determining whether we should run ConX or legacy setup
2014-07-04 14:20:13, Info UI Downlevel OS is server. Continue to run legacy setup
2014-07-04 14:20:13, Info UI Determining if we are in WDS/Unattend mode
2014-07-04 14:20:14, Info UI No need to hide autorun
2014-07-04 14:20:14, Info [0x0a000a] UI Autorun:Autorun core successfully initialized!!!
2014-07-04 14:20:14, Info [0x0a000b] UI Autorun:Autorun UI successfully initialized!!!
2014-07-04 14:20:14, Warning UI CLanguages::v_InitLanguage - Failed to load en-US resources with error 2. Will load fallback binaries
2014-07-04 14:20:15, Info UI AppWindow has layout style 0
2014-07-04 14:20:15, Info UI NavWindow has layout style 0
2014-07-04 14:20:15, Warning [0x0a0180] UI Failed to change the UI language to nl-NL.
2014-07-04 14:20:15, Warning UI CLanguages::v_InitLanguage - Failed to load en-US resources with error 2. Will load fallback binaries
2014-07-04 14:20:15, Info [0x0a011c] UI WizardDialogPost::SetActive
2014-07-04 14:20:16, Info [0x0a018e] UI Passing command line parameter ("D:\Sources\setup.exe /HideWelcome /uilanguage:nl-NL /targetlanguage:nl-NL") to IBS.
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 9 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 16 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 16 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 17 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 17 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 9 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 18 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 9 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 18 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 9 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 9 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 16 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 16 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 17 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 17 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 9 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 18 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 9 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 18 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 9 key on 0 -
Safari won't open, just quits before loading. I'm on Yosimite and up to date.
Safari won't open, just quits before loading. I'm on Yosimite and up to date.
Do a backup.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.Safari.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this. -
I cannot email from Iphoto. Mail just quits. Rainbow wheel spins continuously. Will not let me go from drafts to inbox or outbox, etc.
My regular google gmail works fine.You should be able to do it with Dropbox.
-
Upgrade from 2012 to 2012 R2 just quits
Hello,
We have the task to upgrade a physical server HP DL360 G6. It is running Windows 2012 Datacenter with Hyper-V role and the target is to do in-place upgrade to Windows 2012 R2 Datacenter.
The DVD burned with official 2012 R2 .iso is inserted in DVD tray of server, I started install and after message "Setup is copying files..." and "Setup is starting...", then the install process just quits with no error.
No Panther\setupact.log and Panther\setuperr.log in C:\$WINDOWS.~BT\Sources.
The file C:\Windows\setuperr.log has no content and C:\Windows\setupact.log has no errors mentioned:
2014-06-01 21:50:49, Info UI Determining whether we should run ConX or legacy setup
2014-06-01 21:50:49, Info UI Downlevel OS is server. Continue to run legacy setup
2014-06-01 21:50:49, Info UI Determining if we are in WDS/Unattend mode
2014-06-01 21:50:49, Info UI No need to hide autorun
2014-06-01 21:50:49, Info [0x0a000a] UI Autorun:Autorun core successfully initialized!!!
2014-06-01 21:50:49, Info [0x0a000b] UI Autorun:Autorun UI successfully initialized!!!
2014-06-01 21:50:49, Info UI AppWindow has layout style 0
2014-06-01 21:50:49, Info UI NavWindow has layout style 0
2014-06-01 21:50:49, Warning [0x0a0180] UI Failed to change the UI language to en-US.
2014-06-01 21:50:50, Info [0x0a011c] UI WizardDialogPost::SetActive
2014-06-01 21:50:51, Info [0x0a018e] UI Passing command line parameter ("E:\2012 R2\Sources\setup.exe /HideWelcome /uilanguage:en-US /targetlanguage:en-US") to IBS.
Physical server has 128 GB of RAM but only 92 GB of free space on C: system partition, so I've limited physical memory to 32 GB in order to accomodate to upgrade requirements.
As I mentioned earlier, it has Hyper-V role and some virtual machines that are turned off.
Please advise,
Thanks,
Andrei
Andrei Moraru EndavaHi Andrei,
Based on your description, we need to make sure all VMs have been shutdown before doing the upgrade.
Besides, regarding upgrading from server 2012 with hyper-v role to 2012 r2, the following thread can be referred to as reference.
Upgrade from 2012 to 2012 R2
http://social.technet.microsoft.com/Forums/en-US/34412c47-3a37-4ead-aa67-f5119382ae9d/upgrade-from-server-2012-clusterhyperv-to-server-2012-r2-clusterhyperv?forum=winserverClustering
Best regards,
Frank Shen -
Epson Scan and Mac OSX 10.5.4 - Application just quits
I have a Epson 4180 Scanner and have access to 3 Macs. Two of the macs are running 10.5.4, and the other is running 10.4.11. When I launch "Epson Scan" on either of the Leopard computers, the application bounces on the dock and then just quits. It runs fine on the Mac running Tiger. I have uninstalled/reinstalled the application, repaired disk permissions, repaired pre-binding, and thrown away preferences to no avail. I spent over 2 hours on tech support with Epson, and they say it is an Apple OS issue.
Are there any other programs I can use ? (Image Capture sees the scanner, but does not preview the image nor allow changes in resolution settings).
Any help would be great!There are many posts here about scanners and fixes and workarounds. You can search for them.
Here is a starter:
http://discussions.apple.com/thread.jspa?messageID=7700070�
In general it's an Epson issue in not supporting Leopard. Be sure you have the very latest Epson software and sometimes it's necessary to uninstall and reinstall it. -
Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off" -
Firefox Beta quits on my android. no crash - just quits - is there a fix for this yet?
This thread is apparently abandoned by the support people.
https://support.mozilla.org/en-US/questions/1026282#answer-643651
so I'm starting it again with some details from the other thread...
Galaxy S4 Model ISGH-M919 Android 4.2.2 Baseband M919UVUAMDL Kernel 3.4.0-453951 se.infra@SEP-133 #1 Fri Apr 26 16:55.54 KST 2013 Build JDQ39.M919UVUAMDL-iwireless1.2 SELinux status permissive
on 10/16/14 started quitting on any website. no crash notice. App just quits. uninstalled on 10/17/14 and reinstalled with no add-ons from Google Play Store No change - Firefox runs as long as it is not connected to the web. Shows history - bookmark - etc. Soon as it connects on the internet it quits. Connecting via wireless network. I have uninstalled it so I can use the internet
I got this suggestion but was unable to duplicate all the steps...
Ok so I tried this finally and got it to work: this might be long but a shortened version:
. Connect the device to the computer via usb.
2. In android settings go to About device and double tap on build id 7 times
3. Go back and now see the developer menu
4. Open and enable remote debugging
5. Open up Firefox on the android go to settings > devloper tools and check remote debugging
6. From Desktop go to Tools > Connect
7. Open Tools > Console
8. Click on gear and on the far right click on "Remote debugging for this session only"
9. [adb sdk install required] in a terminal window
adb devices
make sure a device is listed.
10. On desktop in the window that openned up when you opened up connect click on connect
11. Immediately after run this in the terminal:
adb forward tcp:6000 localfilesystem:/data/data/org.mozilla.firefox/firefox-debugger-socket
12. On the device hit enable on the connection
13. should be connected on the connect and click on the remote tabs.
14 the logs will start to show up in the console.
15. If you need adb log cat logs run in the terminal before you start to test:
adb logcat > text.txt
do you thing, and attach it to a bug.
Here was my response:
I'm getting lost on #6 What "Tools" are you talking about?
I am using a laptop btw. Windows 8.1
Thanks
This is where it stopped... some fool got on that thread and was being obnoxious - so I hope we can start fresh here.Hi,
The "Tools" are in the old drop down menu, which are not shown by default in the new Firefox Design. To show this menu:
Firefox Menu > Customize
On the bottom left there will be Show/Hide Toolbars. The Menu will be listed here. -
Why does my iMac just quit and it won't turn back on. Sometimes I can start it a few days later.
It was working just fine and then it just quit. I tried turning it back on but it wouldn't work. Then like 3 days later, I tried turning it on and it came on and worked ok and just quit again. Again, I tried turning it back on and again, it wouldn't come on. I tried again a few days later and it came on. What the heck is wrong with this computer? It has Mac OS X 10.6.8 and the following is the info I got from profiler:
Model Name: iMac
Model Identifier: iMac4,1
Processor Name: Intel Core Duo
Processor Speed: 2 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot Rom Version: IM41.0055.B08
SMC Version (system) 1.1f5
Serial Number (system) QP********U2S
Hardware UUID 00000000-0000-1000-8000-0016CB8BC90C
It had a program called deep freeze on it when I first obtained it. That program would not allow me to make any changes or save anything. A friend gave me a disk and I installed it and it took that program away. It was working fine and then as I said, just quit. I got the computer from an auction from a community college and deep freeze was the program they used to make sure the students using the computers couldn't change anything. When ever the computer got turned off, it would default back to factory settings. When it first turned off and wouldn't start again, I tried taking out one of the two memory sticks and it worked. I then went and bought two new memory sticks and installed them and it worked ok. Then it started doing the same thing again.Hi codyfromchurchill falls,
Welcome to the Support Communities! The resource below will provide some troubleshooting steps if your iPhone is unresponsive or won't turn on.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
http://support.apple.com/en-us/HT201412
If you see a black screen
You might need to charge your device before it can turn on. Plug in your device and let it charge for at least 10 minutes (20 minutes for iPad), then try turning it on.
You should see a battery icon while your device is charging. If you continue to see a black screen, reset your device. If your device doesn't respond when you press buttons
Your device might not return to the Home screen when you press the Home button, wake from sleep when you press the Sleep/Wake button, slide to unlock or power off, or it might appear frozen. Try these steps:
Restart your device.
If it still doesn't respond, or if it doesn't turn back on, reset your device.
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Get more help
If you still need help after trying the steps above, contact Apple Support.
Last Modified: Jan 14, 2015
I hope this information helps ....
- Judy -
My dvd player will not let me change regions, it says i have one more chance to change it, then it just quits when i do, now its stuck on region 1. Any thoughts how i can solve this problem or get round it in some way?
Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory. -
The message function on my Ipad just quit working. I was using it while in Mexico and it just quit. I have come home and synced my Ipad with Itunes and function still does not work. How do I get this function to work again?
When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.
-
Twice Today Photoshop CS5 Just Quit During a File - Save As
I've been doing a lot of raw image processing today with Photoshop 12.0.4 64 bit.
On two occasions, after having opened an image through Camera Raw, working on it in Photoshop proper, then attempting a File - Save As so as to save the PSD, Photoshop just quit. Disappeared. No error, no warning, no nothing, not even in the Windows Event Logs. Kind of a PIA when you're finally happy with an image and it dies when you try to save it. I know I'm not the first to report this; I recall discussing exactly this issue with someone else a few months back.
I narrowed it down to EXACTLY what I was doing in both cases when it quit:
I had chosen File - Save As, and gotten the Save As dialog on the screen.
The default folder wasn't where I wanted to save, which in both cases was C:\TEMP, so I typed exactly the following characters, replacing entirely the filename shown:
C : \ t e m p \
It was instantly upon typing the second backslash in both cases that Photoshop left the building.
When it DOESN'T quit, this is the exact point where normally the Explorer dialog puts up a list of files in that folder, as shown in this screen grab:
Notably I have a LOT of files in that folder. I haven't cleaned it up in an age, and I guess I should do so on the chance that maybe the list is just so long that someone didn't allocate enough space internally...
Here's a detailed edit log from the second quit: http://Noel.ProDigitalSoftware.com/ForumPosts/PhotoshopQuitLog.txt
I'm not sure whether it's just the number of files in that folder, the large number of images I'm processing today, something specific I'm running (e.g., HDR Toning), or something that's recently changed that's causing this (for example, I installed ATI's Catalyst 11.9 day before yesterday).
I'm going to reprocess the same image again, and I'll probably do substantially the same things. I'll add more info to this thread if I see it again.
-NoelBah, no more than I typed the above, than I specifically tested the exact same sequence and reproduced the problem again. This was a relatively short editing sequence.
Notably the current folder the dialog was open to as I was typing the path was the one from which I opened the file, which contains rather a lot of raw image files. The dialog wasn't showing any of them because the default filename was file type .psd, which didn't match any files in that folder, so while your thoughts about FastPictureViewer maybe working on thumbnails could possibly be pertinent, it seems less likely.
I'm going to try to nail this down to a reproducible set of steps. Notably, one thing I'm sure I did in all 3 cases, which I don't often do, was a Crop with Perspective checked (and corners moved).
Another thing I did was Image - Adjust - HDR Toning. I just tried again without doing that and no quit. Unfortunately, I did HDR Toning and still no quit.
-Noel -
IChat Just Quits After Open!!!!
IChat just quits right when I sign into my AIM account (its set to auto login)
everything was working fine earlier but after I installed the new security update iChat has been messed up - ARGH!I had the same problem, and I think i have it somewhat figured out. This happened on both my brand new mac mini and my ibook. The problem is most likely either my router or my dsl modem (gateway?). The solution: If you have a wired computer, remove the ethernet cable, and open ichat. It will tell you that there is no internet connection, but it will stay open. Go into the iChat preferences, and change the settings to Allow Multiple Logins and to NOT connect automatically. Then plug in the cable and connect. That should work. If you have an airport card, turn airport off (on the top right of your screen), and do the exact same thing, turning the airport on at the end after changing the preferences. After that, to log in, unplug the cable/turn off the card, open ichat, plug it back in/turn the card back on, and log into ichat. That's what I found to work. I assume it's my router--linksys--or my dsl gateway--Westell--because ichat works fine in my brother's apartment, where another router is in use (I think it's netgear, but I'm not positive). Hope that helps.
Aaron -
I was wondering how to get my background back? it just quit on me one day and I can not get it back, I was wondering how to get my background back? it just quit on me one day and I can not get it back
explain further please...
Is this your problem?
Program, Utility, Desktop picture, Screensaver won't open or save changes
https://discussions.apple.com/docs/DOC-3046
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
Acrobat update will not allow me to accept. Just quits.
Acrobat update will not allow me to accept terms. Just quits.
See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
Can not publish ios - publish just quits
I just got a new computer (the old motherboard died)
It's a windows 7 home 64bit with 8 gigs of ram.
I have flash cs5.5 installed with both air2.6 and air3.0
Now, regardless of whether it's 2.6 or 3.0, the same thing occurs.
I can debug just fine, I an build the project.... but when it comes time to publish the ipa file it creates the swf, but when the publish dialog changes after teh swf is created, it just quits.
Now before, I used to get the "ipa has been created" dialog when it finished successfully, but I don't get that far.
I tried using adt command line but the java Platform SE Binary has stopped working error... I am wondering if this may also be occuring with the PFI.... does anyone know what is going?Have you tried deleting and reinstalling the app?
Have you wend to Google's YouTune support site?
Maybe you are looking for
-
Media card music wont play on phone
I have downloaded some wma files onto a new, formatted media card but can't get them to play on the Blackberry 8800. The screen opens ok as for other audio files but no sound except for a quick little buzz. The files open and play on the computor. An
-
Why won't YouTube embedded video play from PowerPoint?
I have followed the normal process to embed video in PowerPoint 2010 (32 bit), and playback worked without issues a couple of months ago. Now it does not. I have completed all of the troubleshooting tips, and reinstalled latest FlashPlayer 32-bit,
-
LMS 4.2.3 Performance management
Hi All, For device count 100(CWLMS-4.0-100-K9 ) how many interfaces or how many devices can be managed by the performance management(HUM). While creating the new poller with 2 devices(430 interfaces) added its showing an warning "number of devices fo
-
Hi Guys, I have an updateable report in which the SQL calls a PLSQL function which adds HTML <a> tags to the returned value. This hyperlink is then used to call a seperate web page. Since our upgrade to v4, the report is acutually displaying the text
-
Getting error code 3195 when upgrade my Ios.
Dear All. I am getting error code 1395 when ever i am trying to upgrade my iPhone4 version 4.3.5 to iOS 5. I am useing Itune latest version 10.5. Kindly help me out.