DNS Named will not start
Here is my named log file error.
17-Jan-2013 14:43:32.678 general: main: notice: starting BIND 9.3.2 -u named
17-Jan-2013 14:43:32.694 general: dns/db: critical: Failed to load RRs of a zone with error 34826
17-Jan-2013 14:43:32.694 general: dns/hints: warning: Loading Root data from directory Failed
17-Jan-2013 14:43:32.695 general: server: info: loading configuration from '/etc/opt/novell/named/named.conf'
17-Jan-2013 14:43:32.695 config: isccfg/parser: error: none:0: open: /etc/opt/novell/named/named.conf: file not found
17-Jan-2013 14:43:32.698 general: server: critical: loading configuration: file not found
17-Jan-2013 14:43:32.698 general: server: critical: exiting (due to fatal error)
First was having problem CASA credentials but added them. Made sure the other things were running novell-xregd, they were. I found few older posts with the same error talking about the hosts file, checked it, I don't see anything wrong with it...as far as I can tell. Anyone have any suggestions that I could try. Thanks
Originally Posted by admin_pcs
Did all that, ran through all the steps successfully and it still doesn't create that named.conf file. Any other thoughts? Still have the same error message when I try to run it.
You've also tried starting the novell-named service after reconfiguring? Essentially, the named.conf is generated and maintained bij the service... it's not a static config file in that sense.
If the hosts file is as it should be (never hurts to triple check), I'd try removing the DNS pattern (again using the OES Install & Configure), finish that...
Then, after the packages have been removed successfully, restart the OES Install & Configure reinstall the DNS pattern.
I might have missed it in the thread, but which version of OES is this (version + service pack level), and have you checked to make sure the online update repositories are there and functional? (for OES2 post the output of ' rug sl ' , ' rug ca ' & check if ' rug ref ' refreshes the repos without errors - for OES11 post the output of ' zypper sl ' , ' zypper ca ' , and check if ' zypper ref ' refreshes the repos without errors).
Also make sure the server is patched up correctly, to rule out you are not having issues here due to mismatching package versions.
-Willem
Similar Messages
-
Oracle 10G Non-Network install - OEM will not start when on the LAN.
Greetings,
Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
===========================================================
IP_address hostname.domainname hostname
where:
IP_address is the non-routable IP address you entered for the loopback adapter.
hostname is the name of the computer.
domainname is the name of the domain.
For example:
10.10.10.10 mycomputer.mydomain.com mycomputer
==========================================================
In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
192.168.110.250 IBM-6AB1330E158
==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
IP_address hostname.domainname
- not -
IP_address hostname.domainname hostname
Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
Thanks in Advance for any help,
ADG13I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
fwiw,
ADG13
C:\Documents and Settings\Administrator>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : IBM-6AB1330E158
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ibm.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.110.250
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
Physical Address. . . . . . . . . : 00-11-25-13-96-AF
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 65.24.7.3
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
Ethernet adapter AGN Virtual Network Adapter:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . : AGN Virtual Network Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-01
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 9.49.217.159
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 9.49.217.159
DNS Servers . . . . . . . . . . . : 9.0.2.1
9.0.3.1
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM -
Sql server will not start - Database 'model' cannot be opened. It is in the middle of a restore.
Sql server service will not start after server reboot:
2009-08-13 14:15:43.94 spid7s SQL Trace ID 1 was started by login "sa".
2009-08-13 14:15:43.97 spid7s Starting up database 'mssqlsystemresource'.
2009-08-13 14:15:43.97 spid7s The resource database build version is 10.00.1600. This is an informational message only. No user action is required.
2009-08-13 14:15:44.30 Server A self-generated certificate was successfully loaded for encryption.
2009-08-13 14:15:44.30 spid7s Server name is 'WIN-37R9WFWAJIB\MSDB1'. This is an informational message only. No user action is required.
2009-08-13 14:15:44.32 spid10s Starting up database 'model'.
2009-08-13 14:15:44.32 Server Server is listening on [ 'any' <ipv6> 49167].
2009-08-13 14:15:44.33 Server Server is listening on [ 'any' <ipv4> 49167].
2009-08-13 14:15:44.33 Server Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSDB1 ].
2009-08-13 14:15:44.33 Server Server named pipe provider is ready to accept connection on [ \\.\pipe\sql\query ].
2009-08-13 14:15:44.35 spid10s The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2009-08-13 14:15:44.38 Server Server is listening on [ ::1 <ipv6> 49168].
2009-08-13 14:15:44.38 Server Server is listening on [ 127.0.0.1 <ipv4> 49168].
2009-08-13 14:15:44.38 Server Dedicated admin connection support was established for listening locally on port 49168.
2009-08-13 14:15:44.39 spid10s Error: 927, Severity: 14, State: 2.
2009-08-13 14:15:44.39 spid10s Database 'model' cannot be opened. It is in the middle of a restore.
2009-08-13 14:15:44.49 spid10s Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized.
2009-08-13 14:15:44.50 spid10s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informa
there is plenty of room on the server, so i dont think its a disk space issue. i am able to start the service as such:
C:\Users\Administrator>net start MSSQL$MSDB1 /c /m /T3608
The SQL Server (MSDB1) service is starting.
The SQL Server (MSDB1) service was started successfully
sqlcmd -e
1> select name, status from sysdatabases;
2> go
select name, status from sysdatabases;
name
status
master
65544
tempdb
65544
model
65568
msdb
1073807368
SS_DBA_Dashboard
1073807368
(5 rows affected)
model is in RESTORING state and I dont know how to fix it. I am running simple backups, so I have a somewhat recent backup of model.bak but when I attempt to restore it I get an error:
1> restore database model
2> go
restore database model
Msg 3112, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 1
Cannot restore any database other than master when the server is in single user
mode.
Msg 3013, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 1
RESTORE DATABASE is terminating abnormally.
other forums suggest manually updating the status column but i dont know if my syntax is wrong or it just cant be done in sql server 2008:
1> begin transaction
2> update sysdatabases set status=16 where name='model'
3> ;
4> go
begin transaction
update sysdatabases set status=16 where name='model'
Msg 4406, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 2
Update or insert of view or function 'sysdatabases' failed because it contains a
derived or constant field.
1>
yet another forum suggested taking a cleanly shut down model.mdf and model.ldf from another sql server 2008 instance and placing those in the data directory while moving the 'restoring' ones to a backup location. this didnt work either. any help is appreciated im new to sql server and this is very frustrating! thanks in advance!I have the same issue on SQL Server 2008R2, after a server reboot, but none of the NET START commands or command line attempts are successful to start the Service.
NET START command results in "Access Denied" "System Error 5" and the Command line attempts result in
Server Error: 17058, Severity: 16, State: 1.
Server initerrlog: Could not open error log file ''.
Any help?
SQL Error log file:
2011-03-29 16:50:49.40 Server (c) Microsoft Corporation.
2011-03-29 16:50:49.40 Server All rights reserved.
2011-03-29 16:50:49.40 Server Server process ID is 7292.
2011-03-29 16:50:49.40 Server System Manufacturer: 'Dell Inc.', System Model: 'PowerEdge T710'.
2011-03-29 16:50:49.40 Server Authentication mode is MIXED.
2011-03-29 16:50:49.40 Server Logging SQL Server messages in file 'E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2011-03-29 16:50:49.40 Server This instance of SQL Server last reported using a process ID of 7448 at 3/29/2011 4:30:06 PM (local) 3/29/2011 8:30:06 PM (UTC). This is an informational message only; no user action is required.
2011-03-29 16:50:49.40 Server Registry startup parameters:
-d E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\master.mdf
-e E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
-T 4616
2011-03-29 16:50:49.42 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2011-03-29 16:50:49.42 Server Detected 24 CPUs. This is an informational message; no user action is required.
2011-03-29 16:50:49.84 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2011-03-29 16:50:49.84 Server Lock partitioning is enabled. This is an informational message only. No user action is required.
2011-03-29 16:50:49.86 Server Node configuration: node 0: CPU mask: 0x0000000000fff000:0 Active CPU mask: 0x0000000000fff000:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2011-03-29 16:50:49.86 Server Node configuration: node 1: CPU mask: 0x0000000000000fff:0 Active CPU mask: 0x0000000000000fff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2011-03-29 16:50:49.89 spid9s Starting up database 'master'.
2011-03-29 16:50:49.95 spid9s CHECKDB for database 'master' finished without errors on 2011-03-18 08:46:34.257 (local time). This is an informational message only; no user action is required.
2011-03-29 16:50:49.95 spid9s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2011-03-29 16:50:49.97 spid9s SQL Trace ID 1 was started by login "sa".
2011-03-29 16:50:49.97 spid9s Starting up database 'mssqlsystemresource'.
2011-03-29 16:50:49.99 spid9s The resource database build version is 10.50.1600. This is an informational message only. No user action is required.
2011-03-29 16:50:50.20 spid13s Starting up database 'model'.
2011-03-29 16:50:50.20 spid9s Server name is 'XXXX'. This is an informational message only. No user action is required.
2011-03-29 16:50:50.21 Server The certificate [Cert Hash(sha1) "C41DC20703F049763778AC2842C3C8A3A2C6EED4"] was successfully loaded for encryption.
2011-03-29 16:50:50.21 Server Server is listening on [ 'any' <ipv6> 1433].
2011-03-29 16:50:50.21 Server Server is listening on [ 'any' <ipv4> 1433].
2011-03-29 16:50:50.21 Server Server local connection provider is ready to accept connection on [
\\.\pipe\SQLLocal\MSSQLSERVER ].
2011-03-29 16:50:50.21 Server Server named pipe provider is ready to accept connection on [
\\.\pipe\sql\query ].
2011-03-29 16:50:50.21 Server Server is listening on [ ::1 <ipv6> 1434].
2011-03-29 16:50:50.21 spid13s The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2011-03-29 16:50:50.21 Server Server is listening on [ 127.0.0.1 <ipv4> 1434].
2011-03-29 16:50:50.21 spid13s Error: 927, Severity: 14, State: 2.
2011-03-29 16:50:50.21 spid13s Database 'model' cannot be opened. It is in the middle of a restore.
2011-03-29 16:50:50.21 Server Dedicated admin connection support was established for listening locally on port 1434.
2011-03-29 16:50:50.22 spid13s Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in
the event log that may indicate why the tempdb files could not be initialized.
2011-03-29 16:50:50.22 spid13s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required. -
Will not start on New Install. Opening goes straight to Crash reporter
Will not start on New Install. Clicking on icon does not open a window and goes straight to Crash reporter. I cannot access a window to try to open in safe mode (unless there is another method than outlined in the help article).
I run Windows XP and trying to install the latest 15.0.1 version. Before install, I did disable my Symantic virus protection. I have never used Firefox and would like to try it, but I'm having little success so far to even get started.
Please let me know if anyone has any other ideas or need more information from me.hello Singyt, the bug report associated to this kind of crash indicates that it might be a malware related issue.
your crash report also shows a file named "urixalog.dll", which doesn't turn up any search hits on google, which is also slightly suspicious. could you search for that file on your pc and upload it to a site like virustotal.com in order to analyze it.
please do a full scan of your system with the security software already in place and/or a different tool like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes].
[[Troubleshoot Firefox issues caused by malware]]
edit: the bug report also suggests that a monitoring program named spector pro/360/... which essentially acts like malware, might cause the issue. in case you have that installed please remove it. otherwise [https://support.mozilla.org/en-US/kb/Firefox%20crashes%20when%20you%20open%20it#w_backdoor-ulrbot-c here] would be a removal guide for urixalog.dll -
Hi, I am having an issue with my SLD server. The java will not start completely. This is the log i get:
If you have any clue that would be great.
thanks
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[./log/defaultTrace.trc]/>
<!PATTERN[defaultTrace.trc]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[Cp1252]/>
<!FILESET[0, 20, 10485760]/>
<!PREVIOUSFILE[defaultTrace.19.trc]/>
<!NEXTFILE[defaultTrace.1.trc]/>
<!LOGHEADER[END]/>
#1.5#000BCDEF4B75001E0000000100000B4400046A834059524E#1243011859688#com.sap.di.sdic.srv.java.SDICServiceFrame##com.sap.di.sdic.srv.java.SDICServiceFrame#######SAPEngine_System_Thread[impl:5]_70##0#0#Error#1#/Applications/SDIC/Service#Java###Failed to initialize the SDIC service. An unanticipated error has occured; Error description - #1#com.sap.di.sdic.exception.DiException: StateStore Initialization requires the values to be specified for the properties"sdic.state.store.storeManager" and "sdic.nwdiservers.admin.user"#
#1.5#000BCDEF4B75001E0000000300000B4400046A8340596B1D#1243011859688#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_70##0#0#Error#1#/System/Server#Plain###Service tcdisdic~srv error. Nested exception is: com.sap.engine.frame.ServiceException: StateStore Initialization requires the values to be specified for the properties"sdic.state.store.storeManager" and "sdic.nwdiservers.admin.user"
at com.sap.di.sdic.srv.java.SDICServiceFrame.start(SDICServiceFrame.java:162)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Caused by: com.sap.di.sdic.exception.DiException: StateStore Initialization requires the values to be specified for the properties"sdic.state.store.storeManager" and "sdic.nwdiservers.admin.user"
at com.sap.di.sdic.srv.java.SDICServiceFrame.start(SDICServiceFrame.java:149)
... 5 more
Caused by: java.lang.Exception: StateStore Initialization requires the values to be specified for the properties"sdic.state.store.storeManager" and "sdic.nwdiservers.admin.user"
... 6 more
#1.5#000BCDEF4B7500260000000000000B4400046A8340A5D8ED#1243011864701#com.sap.caf.um.metadata.imp.MetaDataTools##com.sap.caf.um.metadata.imp.MetaDataTools.MetaDataTools()#######SAPEngine_System_Thread[impl:5]_54##0#0#Info#1#/System/Server#Plain###sap.com caf/um/metadata/imp MAIN_APL70VAL_C 963656#
#1.5#000BCDEF4B75002F0000000100000B4400046A8340D0C614#1243011867513#com.sap.engine.services.rfcengine##com.sap.engine.services.rfcengine.RFCRuntimeInterfaceImpl.newProperties(int prcs, int conn)#######SAPEngine_System_Thread[impl:5]_35##0#0#Error#1#/System/Server#Java###enter newProperties()##
#1.5#000BCDEF4B75002F0000000300000B4400046A8340D702A6#1243011867919#com.sap.engine.services.rfcengine##com.sap.engine.services.rfcengine.RFCRuntimeInterfaceImpl.init()#######SAPEngine_System_Thread[impl:5]_35##0#0#Error#1#/System/Server#Java###SNC properties not found ##
#1.5#000BCDEF4B7500300000000000000B4400046A8340F313F1#1243011869762#com.sap.caf.um.relgroups.imp.persistence.DataSource##com.sap.caf.um.relgroups.imp.persistence.DataSource.DataSource()#######SAPEngine_System_Thread[impl:5]_4##0#0#Info#1#/System/Server#Plain###sap.com caf/um/relgroups/imp MAIN_APL70VAL_C 963842#
#1.5#000BCDEF4B7500380000000100000B4400046A83412AA249#1243011873402#com.adobe.service.sap.configuration##com.adobe.service.sap.configuration#######OrderedChannel for service##0#0#Error#1#/System/Security#Plain###Error while reading trusted anchor configuration information:
com.sap.security.core.server.securestorage.exception.ObjectRetrievalException: Could not find clientID servicescomadobeDocumentServicesConfigurationAdobeConfigurationService~jar
at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.getClientsStorageLocation(RemoteSecureStorageClientContextImpl.java:231)
at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.retrieveObject(RemoteSecureStorageClientContextImpl.java:724)
at com.adobe.service.sap.configuration.ConfigurationService.readXML(Unknown Source)
at com.adobe.service.sap.configuration.ConfigurationService.<init>(Unknown Source)
at com.adobe.service.sap.configuration.ServiceFrame.start(Unknown Source)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
#1.5#000BCDEF4B7500380000000300000B4400046A83412AAC7B#1243011873402#com.adobe.service.sap.configuration##com.adobe.service.sap.configuration#######OrderedChannel for service##0#0#Error#1#/System/Security#Plain###Error while reading credential configuration information:
com.sap.security.core.server.securestorage.exception.ObjectRetrievalException: Could not find clientID servicescomadobeDocumentServicesConfigurationAdobeConfigurationService~jar
at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.getClientsStorageLocation(RemoteSecureStorageClientContextImpl.java:231)
at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.retrieveObject(RemoteSecureStorageClientContextImpl.java:724)
at com.adobe.service.sap.configuration.ConfigurationService.readXML(Unknown Source)
at com.adobe.service.sap.configuration.ConfigurationService.<init>(Unknown Source)
at com.adobe.service.sap.configuration.ServiceFrame.start(Unknown Source)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
#1.5#000BCDEF4B7500380000000500000B4400046A83412AB51D#1243011873402#com.adobe.service.sap.configuration##com.adobe.service.sap.configuration#######OrderedChannel for service##0#0#Error#1#/System/Security#Plain###Error while reading CRL configuration information:
com.sap.security.core.server.securestorage.exception.ObjectRetrievalException: Could not find clientID servicescomadobeDocumentServicesConfigurationAdobeConfigurationService~jar
at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.getClientsStorageLocation(RemoteSecureStorageClientContextImpl.java:231)
at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.retrieveObject(RemoteSecureStorageClientContextImpl.java:724)
at com.adobe.service.sap.configuration.ConfigurationService.readXML(Unknown Source)
at com.adobe.service.sap.configuration.ConfigurationService.<init>(Unknown Source)
at com.adobe.service.sap.configuration.ServiceFrame.start(Unknown Source)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
#1.5#000BCDEF4B7500380000000700000B4400046A83412ABDBE#1243011873402#com.adobe.service.sap.configuration##com.adobe.service.sap.configuration#######OrderedChannel for service##0#0#Error#1#/System/Security#Plain###Error while reading password configuration information:
com.sap.security.core.server.securestorage.exception.ObjectRetrievalException: Could not find clientID servicescomadobeDocumentServicesConfigurationAdobeConfigurationService~jar
at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.getClientsStorageLocation(RemoteSecureStorageClientContextImpl.java:231)
at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.retrieveObject(RemoteSecureStorageClientContextImpl.java:724)
at com.adobe.service.sap.configuration.ConfigurationService.readXML(Unknown Source)
at com.adobe.service.sap.configuration.ConfigurationService.<init>(Unknown Source)
at com.adobe.service.sap.configuration.ServiceFrame.start(Unknown Source)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Jean SeguinHi,
The user SAPJSF is not lock and here is the output of the Stdserver.out
stdout/stderr redirect
node name : server0
pid : 5800
system name : IS1
system nr. : 01
started at : Fri May 22 14:50:38 2009
Reserved 1610612736 (0x60000000) bytes before loading DLLs.
[Thr 5756] Fri May 22 14:50:39 2009
[Thr 5756] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel is starting...
Loading: LogManager ... 6420 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 440 ms.
Loading: ThreadManager ... 76 ms.
Loading: IpVerificationManager ... 46 ms.
Loading: ClassLoaderManager ... 30 ms.
Loading: ClusterManager ... 638 ms.
Loading: LockingManager ... 227 ms.
Loading: ConfigurationManager ... 8136 ms.
Loading: LicensingManager ... 76 ms.
Loading: CacheManager ... 410 ms.
Loading: ServiceManager ...
Loading services.:
Service memory started. (45 ms).
Service cross started. (243 ms).
Service file started. (289 ms).
Service runtimeinfo started. (30 ms).
Service timeout started. (106 ms).
Service trex.service started. (106 ms).
Service p4 started. (744 ms).
Service classpath_resolver started. (30 ms).
Service userstore started. (243 ms).
Service jmx_notification started. (532 ms).
Service log_configurator started. (24331 ms).
Service locking started. (15 ms).
Service http started. (759 ms).
Service naming started. (1775 ms).
Service appclient started. (228 ms).
Service failover started. (213 ms).
Service jmsconnector started. (304 ms).
Service javamail started. (410 ms).
Service ts started. (349 ms).
Service licensing started. (30 ms).
Service connector started. (380 ms).
Service iiop started. (652 ms).
Service webservices started. (1700 ms).
Service deploy started. (31390 ms).
Service configuration started. (61 ms).
Service MigrationService started. (106 ms).
Service bimmrdeployer started. (30 ms).
Service dbpool started. (6041 ms).
Service com.sap.security.core.ume.service started. (7680 ms).
Service tcdisdic~srv started. (1776 ms).
Service security started. (4068 ms).
Service classload started. (228 ms).
Service applocking started. (228 ms).
Service shell started. (379 ms).
Service ejb started. (547 ms).
Service tceCATTPingservice started. (425 ms).
Service telnet started. (501 ms).
Service dsr started. (1062 ms).
Service servlet_jsp started. (1791 ms).
Service webdynpro started. (1426 ms).
Service cafummetadata~imp started. (2095 ms).
Service keystore started. (2474 ms).
Service ssl started. (15 ms).
Service cafruntimeconnectivity~impl started. (50818 ms).
Service jmx started. (3111 ms).
Service tcsecsecurestorage~service started. (1199 ms).
Service tcsecwssec~service started. (835 ms).
Service cafumrelgroups~imp started. (4099 ms).
Service CUL started. (2550 ms).
Service tcsecdestinations~service started. (2824 ms).
Service apptracing started. (1351 ms).
Service com.adobe~DataManagerService started. (3187 ms).
Service pmi started. (1138 ms).
Service tcsecvsi~service started. (1988 ms).
Service sld started. (5525 ms).
Service basicadmin started. (4568 ms).
Service com.adobe~DocumentServicesDestProtoService started. (1548 ms).
Service com.adobe~DocumentServicesBinaries2 started. (1624 ms).
Service com.adobe~DocumentServicesLicenseSupportService started. (1336 ms).
Service adminadapter started. (364 ms).
Service com.adobe~LicenseService started. (470 ms).
Service monitor started. (1564 ms).
Service com.adobe~DocumentServicesConfiguration started. (2762 ms).
Service com.adobe~TrustManagerService started. (182 ms).
Service com.adobe~PDFManipulation started. (4888 ms).
Service tc.CBS.Service started. (10564 ms).
Service com.adobe~FontManagerService started. (10049 ms).
Service com.sap.aii.af.cpa.svc started. (9821 ms).
Service com.sap.aii.af.security.service started. (31 ms).
Service tc.monitoring.logviewer started. (19216 ms).
Service com.sap.aii.af.svc started. (2808 ms).
Service com.sap.aii.af.ms.svc started. (1366 ms).
Service com.adobe~XMLFormService started. (6315 ms).
Service com.sap.aii.adapter.bc.svc started. (106 ms).
Service com.sap.aii.adapter.marketplace.svc started. (243 ms).
Service com.sap.aii.adapter.xi.svc started. (182 ms).
Service com.sap.aii.adapter.file.svc started. (304 ms).
Service com.sap.aii.adapter.jdbc.svc started. (288 ms).
Service com.sap.aii.adapter.rfc.svc started. (122 ms).
Service jms_provider started. (22373 ms).
Service com.sap.aii.adapter.mail.svc started. (1442 ms).
Service com.sap.aii.adapter.jms.svc started. (895 ms).
Service com.sap.aii.af.ispeak.svc started. (728 ms).
Service rfcengine started. (73524 ms).
ServiceManager started for 148445 ms.
Framework started for 166083 ms.
SAP J2EE Engine Version 7.00 PatchLevel is running!
PatchLevel October 23, 2006 07:41 GMT -
My iBook will not start up all the way. It gets to the gray apple screen and just spins.(3hrs) I tried everything. It will not start up with 10.3 CD or OS9. It will start up with nortons CD but you cant see the Hard Drive. Hardware test CD starts and every thing checks out fine. What to do. I hope its not its final day.
Paul,
Do you have OS X 10.3 installed on it?
Try booting into Safe Mode. This will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk.
If this works you will see your normal desktop. Once completely started up in Safe Mode, try to restart normally, and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
Select the named boot volume in the left sidebar, and repair permissions on it.
See if you are able to do a little hard drive maintenance to helps things out.
If it won't start up in Safe Mode, you can try Single User Mode and fsck, but if Safe Mode won't do it for you, fsck may not, either.
Keep Norton far, far away from any hard drive with OS X installed on it. DiskDoctor is known as DiskDoctor Kevorkian around here. It finds non-existent "errors" and sets about "correcting," them, killing your hard drive in the process.
If none of Apple's own disk repair procedures work (Safe Mode, Disk Utility from the Install disc, or fsck), it may be wise to invest in DiskWarrior. It can often find your hard drive and repair it when Apple's own utilities cannot. DiskWarrior has saved my hard drive more than once.
Good luck. -
How to repair applications that will not start
I have programs that will not start on my iMac . I have never had one issue since purchased . Do I need to reinstall lion to resolve my issues?
Thank you in advance for your responses.Check with this compatability table, check with the specs of the program, watch for the "for 10.5+" that doens't mean it will work for 10.6 or 10.7.
http://roaringapps.com/apps:table
Use the developers uninstaller if possible, if not consult on their site etc., what is the manual uninstall methods.
Some programs have to use a uninstaller.
Sometimes you can simply drag and drop the program from the Applicaitons folder to the trash and that will be that, others have other bits in the System/Library/Extension folder (dangerous!) that can be removed by hand IF you know what to look for.
Usually a program will have it's name or other id info in their files, one can use Easy Find to locate all these named files. However don't go deleting without backing up your data off the machine.
delete the wrong file and your Mac will refuse to boot up
I don't advise "app undelete" programs, they tend to make people think that the app undelete program knows the right files to undelete and it doesn't, it just does a simple name search.
Good Luck -
IBook will not start up past gray screen w/ apple logo
iBook will not start up past gray screen w/ apple logo. So I have zeroed out the hard drive and reinstalled tiger. No change except if I start up holding shift it will boot and welcome comes up then black screen that says you must restart by holding down power key.
Zeroed out the HD again with same results. Also I have a iBook G3 with the same symptoms.What you are experiencing is a kernel panic.
Try starting up from the Mac OS X Install Disc by inserting the disc and restarting your computer, holding down the C key as the startup chime is ending. Then choose Installer > Open Disk Utility (in Panther) or (in Tiger) click 'Next' at the language screen and choose Utilities > Disk Utility and select the hard drive in the left column. Choose the First Aid tab. Click Repair Disk to test and repair the hard drive.
Once you have repaired the hard drive with the Install disc's Disk Utility, then try to restart normally, and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
Select the named boot volume in the left sidebar, ("Macintosh HD" unless you've renamed it). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
See if a little hard drive maintenance helps things out. -
I had avahi + cups working for a while back, but going to use it today and avahi-daemon will not start:
% ~ sudo systemctl status avahi-daemon
avahi-daemon.service - Avahi mDNS/DNS-SD Stack
Loaded: loaded (/usr/lib/systemd/system/avahi-daemon.service; enabled)
Active: failed (Result: timeout) since Mon 2013-07-15 12:03:33 EDT; 5min ago
Main PID: 2234
Status: "Server startup complete. Host name is air-laptop.local. Local service cookie is 81586563."
CGroup: name=systemd:/system/avahi-daemon.service
Jul 15 12:02:05 air-laptop avahi-daemon[2234]: Service "air-laptop" (/services/ssh.service) successfully established.
Jul 15 12:02:05 air-laptop avahi-daemon[2234]: Service "air-laptop" (/services/sftp-ssh.service) successfully established.
Jul 15 12:03:33 air-laptop systemd[1]: avahi-daemon.service operation timed out. Terminating.
Jul 15 12:03:33 air-laptop avahi-daemon[2234]: Got SIGTERM, quitting.
Jul 15 12:03:33 air-laptop avahi-daemon[2234]: Leaving mDNS multicast group on interface virbr0.IPv4 with address 192.168.122.1.
Jul 15 12:03:33 air-laptop avahi-daemon[2234]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 10.0.1.128.
Jul 15 12:03:33 air-laptop avahi-daemon[2234]: avahi-daemon 0.6.31 exiting.
Jul 15 12:03:33 air-laptop systemd[1]: avahi-daemon.service: Got notification message from PID 2234, but reception only permitted for PID 0
Jul 15 12:03:33 air-laptop systemd[1]: Failed to start Avahi mDNS/DNS-SD Stack.
Jul 15 12:03:33 air-laptop systemd[1]: Unit avahi-daemon.service entered failed state.
All files in /etc/avahi/* appear to be defaults.
/etc/dhcpcd.conf:
# A sample configuration for dhcpcd.
# See dhcpcd.conf(5) for details.
# Inform the DHCP server of our hostname for DDNS.
hostname
# To share the DHCP lease across OSX and Windows a ClientID is needed.
# Enabling this may get a different lease than the kernel DHCP client.
# Some upstream DHCP servers may also require a ClientID, such as FRITZ!Box.
#clientid
# A list of options to request from the DHCP server.
option domain_name_servers, domain_name, domain_search, host_name
option classless_static_routes
# Most distributions have NTP support.
option ntp_servers
# Respect the network MTU.
option interface_mtu
# A ServerID is required by RFC2131.
#require dhcp_server_identifier
# A hook script is provided to lookup the hostname if not set by the DHCP
# server, but it should not be run by default.
nohook lookup-hostname
noipv4ll
noipv6rs
Any ideas for investigation?
Last edited by nibblebot (2013-07-15 17:55:35)Ok, should have researched this more. This post https://bbs.archlinux.org/viewtopic.php?id=165913 led me to https://www.archlinux.org/news/filesyst … equired-1/
Basically, somehow, my /var/run was no longer symlinked to /run.
I ran the commands here after stopping all the services whose pids were in /var/run.
Then restarted and now avahi works again. -
Mac Pro will not shut down, wakes from sleep and will not start up in safe mode (restarts).
Wakes from sleep about every 4.5 mins, here is the log from wake from sleep:
7/30/12 8:43:24.000 AM kernel[0]: Wake reason: ? (Network)
7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:43.000 AM kernel[0]: Previous Sleep Cause: 5
7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:43.429 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:47:46.000 AM kernel[0]: Ethernet [Intel82574L]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,3c00]
7/30/12 8:47:46.000 AM kernel[0]: Intel82574L::setLinkStatus - active 1face000, b
7/30/12 8:47:50.459 AM CalendarAgent[202]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8b0d2a8340 {NSUnderlyingError=0x7f8b0c4c1b50 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://david%[email protected]/principals///david%[email protected]/principals/, NSErrorFailingURLKey=https://david%[email protected]/principals///david%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
7/30/12 8:47:52.000 AM kernel[0]: Intel82574L::timeoutHandler - no link - reset the chipset once 1face001, 0
7/30/12 8:47:52.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:53.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:53.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:53.000 AM kernel[0]: Graphics suppressed 10291 ms
7/30/12 8:47:53.293 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:47:53.305 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:47:53.308 AM blued[84]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f8dd800][BNBTrackpadDevice::init][75.15] init is complete
7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f8dd800][BNBTrackpadDevice::handleStart][75.15] returning 1
7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f93da00][AppleMultitouchHIDEventDriver::start] entered
7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f939300][AppleMultitouchDevice::start] entered
7/30/12 8:47:54.304 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:47:54.308 AM mDNSResponder[67]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.4)
7/30/12 8:48:28.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:48:28.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:48:29.000 AM kernel[0]: [ffffff805f939300][AppleMultitouchDevice::willTerminate] entered
7/30/12 8:48:29.000 AM kernel[0]: [ffffff805f939300][AppleMultitouchDevice::stop] entered
7/30/12 8:48:29.000 AM kernel[0]: Wake reason: ? (Network)
7/30/12 8:52:47.000 AM kernel[0]: Previous Sleep Cause: 5
7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:47.497 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:52:50.000 AM kernel[0]: Ethernet [Intel82574L]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,3c00]
7/30/12 8:52:50.000 AM kernel[0]: Intel82574L::setLinkStatus - active 1face000, b
7/30/12 8:52:54.459 AM CalendarAgent[202]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8b0c084f70 {NSUnderlyingError=0x7f8b10a128d0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://david%[email protected]/principals///david%[email protected]/principals/, NSErrorFailingURLKey=https://david%[email protected]/principals///david%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
7/30/12 8:52:56.000 AM kernel[0]: Intel82574L::timeoutHandler - no link - reset the chipset once 1face001, 0
7/30/12 8:52:57.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:57.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:57.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:57.000 AM kernel[0]: Graphics suppressed 10340 ms
7/30/12 8:52:57.341 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:52:57.354 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:52:57.355 AM blued[84]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f8e4c00][BNBTrackpadDevice::init][75.15] init is complete
7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f8e4c00][BNBTrackpadDevice::handleStart][75.15] returning 1
7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f91b800][AppleMultitouchHIDEventDriver::start] entered
7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f95c600][AppleMultitouchDevice::start] entered
7/30/12 8:52:58.354 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:52:58.358 AM mDNSResponder[67]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.4)
7/30/12 8:53:33.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:53:33.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:53:33.000 AM kernel[0]: [ffffff805f95c600][AppleMultitouchDevice::willTerminate] entered
7/30/12 8:53:33.000 AM kernel[0]: [ffffff805f95c600][AppleMultitouchDevice::stop] entered
7/30/12 8:53:33.000 AM kernel[0]: Wake reason: ? (Network)
7/30/12 8:57:51.000 AM kernel[0]: Previous Sleep Cause: 5
7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:57:51.435 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:57:54.000 AM kernel[0]: Ethernet [Intel82574L]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,3c00]
7/30/12 8:57:54.000 AM kernel[0]: Intel82574L::setLinkStatus - active 1face000, b
7/30/12 8:57:58.228 AM fseventsd[76]: SLOWDOWN: client 0x7f8a4e007c00 (pid 2824) sleeping due to too many errors (num usleeps 299)
7/30/12 8:57:58.462 AM CalendarAgent[202]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8b0d295160 {NSUnderlyingError=0x7f8b0b4bd590 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://david%[email protected]/principals///david%[email protected]/principals/, NSErrorFailingURLKey=https://david%[email protected]/principals///david%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::timeoutHandler - no link - reset the chipset once 1face001, 0
7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:58:01.213 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:58:01.000 AM kernel[0]: Graphics suppressed 10334 ms
7/30/12 8:58:01.341 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:58:01.349 AM blued[84]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f930400][BNBTrackpadDevice::init][75.15] init is complete
7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f930400][BNBTrackpadDevice::handleStart][75.15] returning 1
7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f941400][AppleMultitouchHIDEventDriver::start] entered
7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f985a00][AppleMultitouchDevice::start] entered
7/30/12 8:58:02.225 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:58:02.229 AM mDNSResponder[67]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.4)
7/30/12 8:58:37.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:58:37.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:58:37.000 AM kernel[0]: [ffffff805f985a00][AppleMultitouchDevice::willTerminate] entered
7/30/12 8:58:37.000 AM kernel[0]: [ffffff805f985a00][AppleMultitouchDevice::stop] entered
7/30/12 8:58:37.000 AM kernel[0]: Wake reason: ? (Network)
7/30/12 9:02:55.000 AM kernel[0]: Previous Sleep Cause: 5
Will not shut down, restarts at end of shut down. Log:
7/30/12 8:43:24.000 AM kernel[0]: Wake reason: ? (Network)
7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:43.000 AM kernel[0]: Previous Sleep Cause: 5
7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:43.429 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:47:46.000 AM kernel[0]: Ethernet [Intel82574L]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,3c00]
7/30/12 8:47:46.000 AM kernel[0]: Intel82574L::setLinkStatus - active 1face000, b
7/30/12 8:47:50.459 AM CalendarAgent[202]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8b0d2a8340 {NSUnderlyingError=0x7f8b0c4c1b50 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://david%[email protected]/principals///david%[email protected]/principals/, NSErrorFailingURLKey=https://david%[email protected]/principals///david%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
7/30/12 8:47:52.000 AM kernel[0]: Intel82574L::timeoutHandler - no link - reset the chipset once 1face001, 0
7/30/12 8:47:52.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:53.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:53.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:53.000 AM kernel[0]: Graphics suppressed 10291 ms
7/30/12 8:47:53.293 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:47:53.305 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:47:53.308 AM blued[84]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f8dd800][BNBTrackpadDevice::init][75.15] init is complete
7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f8dd800][BNBTrackpadDevice::handleStart][75.15] returning 1
7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f93da00][AppleMultitouchHIDEventDriver::start] entered
7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f939300][AppleMultitouchDevice::start] entered
7/30/12 8:47:54.304 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:47:54.308 AM mDNSResponder[67]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.4)
7/30/12 8:48:28.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:48:28.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:48:29.000 AM kernel[0]: [ffffff805f939300][AppleMultitouchDevice::willTerminate] entered
7/30/12 8:48:29.000 AM kernel[0]: [ffffff805f939300][AppleMultitouchDevice::stop] entered
7/30/12 8:48:29.000 AM kernel[0]: Wake reason: ? (Network)
7/30/12 8:52:47.000 AM kernel[0]: Previous Sleep Cause: 5
7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:47.497 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:52:50.000 AM kernel[0]: Ethernet [Intel82574L]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,3c00]
7/30/12 8:52:50.000 AM kernel[0]: Intel82574L::setLinkStatus - active 1face000, b
7/30/12 8:52:54.459 AM CalendarAgent[202]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8b0c084f70 {NSUnderlyingError=0x7f8b10a128d0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://david%[email protected]/principals///david%[email protected]/principals/, NSErrorFailingURLKey=https://david%[email protected]/principals///david%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
7/30/12 8:52:56.000 AM kernel[0]: Intel82574L::timeoutHandler - no link - reset the chipset once 1face001, 0
7/30/12 8:52:57.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:57.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:57.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:57.000 AM kernel[0]: Graphics suppressed 10340 ms
7/30/12 8:52:57.341 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:52:57.354 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:52:57.355 AM blued[84]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f8e4c00][BNBTrackpadDevice::init][75.15] init is complete
7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f8e4c00][BNBTrackpadDevice::handleStart][75.15] returning 1
7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f91b800][AppleMultitouchHIDEventDriver::start] entered
7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f95c600][AppleMultitouchDevice::start] entered
7/30/12 8:52:58.354 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:52:58.358 AM mDNSResponder[67]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.4)
7/30/12 8:53:33.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:53:33.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:53:33.000 AM kernel[0]: [ffffff805f95c600][AppleMultitouchDevice::willTerminate] entered
7/30/12 8:53:33.000 AM kernel[0]: [ffffff805f95c600][AppleMultitouchDevice::stop] entered
7/30/12 8:53:33.000 AM kernel[0]: Wake reason: ? (Network)
7/30/12 8:57:51.000 AM kernel[0]: Previous Sleep Cause: 5
7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:57:51.435 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:57:54.000 AM kernel[0]: Ethernet [Intel82574L]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,3c00]
7/30/12 8:57:54.000 AM kernel[0]: Intel82574L::setLinkStatus - active 1face000, b
7/30/12 8:57:58.228 AM fseventsd[76]: SLOWDOWN: client 0x7f8a4e007c00 (pid 2824) sleeping due to too many errors (num usleeps 299)
7/30/12 8:57:58.462 AM CalendarAgent[202]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8b0d295160 {NSUnderlyingError=0x7f8b0b4bd590 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://david%[email protected]/principals///david%[email protected]/principals/, NSErrorFailingURLKey=https://david%[email protected]/principals///david%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::timeoutHandler - no link - reset the chipset once 1face001, 0
7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:58:01.213 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:58:01.000 AM kernel[0]: Graphics suppressed 10334 ms
7/30/12 8:58:01.341 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:58:01.349 AM blued[84]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f930400][BNBTrackpadDevice::init][75.15] init is complete
7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f930400][BNBTrackpadDevice::handleStart][75.15] returning 1
7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f941400][AppleMultitouchHIDEventDriver::start] entered
7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f985a00][AppleMultitouchDevice::start] entered
7/30/12 8:58:02.225 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:58:02.229 AM mDNSResponder[67]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.4)
7/30/12 8:58:37.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:58:37.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:58:37.000 AM kernel[0]: [ffffff805f985a00][AppleMultitouchDevice::willTerminate] entered
7/30/12 8:58:37.000 AM kernel[0]: [ffffff805f985a00][AppleMultitouchDevice::stop] entered
7/30/12 8:58:37.000 AM kernel[0]: Wake reason: ? (Network)
7/30/12 9:02:55.000 AM kernel[0]: Previous Sleep Cause: 5
And will not start up in safe mode. I have reset PRAM and SMC. Also restarted with no startup items, no luck. Had the problem of waking from sleep and not shutting down in 10.7, updated to 10.8 hoping for fix, no luck. Any help would be appreciated.
ThanksHi, this log has some similarities to my ipod touch which seems to be not sleeping properly due to wireless issues. Can I check - are you using a wifi connection - if so have you tried ethernet?
log entries below ...
Sep 5 00:28:58 Peters-iPod mDNSResponder[34] <Error>: mDNS_RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:5AB0:35FF:FE35:C9B7)
Sep 5 00:28:58 Peters-iPod mDNSResponder[34] <Error>: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.0.95)
Sep 5 00:28:58 Peters-iPod configd[44] <Notice>: network configuration changed.
Sep 5 00:28:58 Peters-iPod UserEventAgent[12] <Warning>: DEBUG: Changing WiFi state: 1
Sep 5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): SDIO Cmd Timeout, 1, 1
Sep 5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::enableHTClock(): Failed to read HT Clock register, SDIO Cmd Timeout
Sep 5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::retainClocks() Failed to enable HT Clock, SDIO Cmd Timeout
Sep 5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::txPacket() Unable to wake bus; error SDIO Cmd Timeout
Sep 5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): SDIO Cmd Timeout, 1, 2
Sep 5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::disableHTClock(): Failed to write HT Clock register, SDIO Cmd Timeout
Sep 5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::releaseClocks(): Failed to disable HT clock: SDIO Cmd Timeout
Sep 5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCmdManager::processPendingList(): Failed to send sync command WLC_GET_BSS_INFO (136) to device, SDIO Cmd Timeout. transID 48928, respLen 1152.
Sep 5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANNetManager::updateBSSInfo(): WLC_GET_BSS_INFO Failed SDIO Cmd Timeout
Sep 5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): SDIO Cmd Timeout, 1, 3
Sep 5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::enableHTClock(): Failed to read HT Clock register, SDIO Cmd Timeout
Sep 5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::retainClocks() Failed to enable HT Clock, SDIO Cmd Timeout
Sep 5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::txPacket() Unable to wake bus; error SDIO Cmd Timeout
Sep 5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): SDIO Cmd Timeout, 1, 4
Sep 5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::disableHTClock(): Failed to write HT Clock register, SDIO Cmd Timeout
Sep 5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::releaseClocks(): Failed to disable HT clock: SDIO Cmd Timeout
Sep 5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCmdManager::processPendingList(): Failed to send sync command WLC_GET_BSS_INFO (136) to device, SDIO Cmd Timeout. transID 48929, respLen 1152.
Sep 5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANNetManager::updateBSSInfo(): WLC_GET_BSS_INFO Failed SDIO Cmd Timeout
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): SDIO Cmd Timeout, 1, 5
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::dumpDebugInfo(): CRITICAL ERROR: handleTransferError
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::logState(): Tx: seq 185, credit 191, flow 0x0; Rx: seq 167
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::logState(): state 0x23, sd-clk +1, sd-rate 20250000 Hz
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::logClockState(): Failed to read HT Clock register, SDIO Cmd Timeout
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): Triggered Watchdog after 6 errors (last was SDIO Cmd Timeout)
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::enableHTClock(): Failed to read HT Clock register, SDIO Cmd Timeout
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::retainClocks() Failed to enable HT Clock, SDIO Cmd Timeout
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::txPacketChain() Unable to wake bus; error SDIO Cmd Timeout
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): SDIO Cmd Timeout, 1, 0
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::disableHTClock(): Failed to write HT Clock register, SDIO Cmd Timeout
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::releaseClocks(): Failed to disable HT clock: SDIO Cmd Timeout
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::doOutputPacketChain(): Packet transmission failure: SDIO Cmd Timeout
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleWatchdogTimeout(): Watchdog timer fired
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::watchDogReset(): fStateFlags(0x140E3), thread(00040532)
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::halt()
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLAN Left BSS: @ 0xc11a7a00, BSSID = 00:18:4d:67:54:12, rssi = -45, rate = 54 (100%), channel = 7, encryption = 0x8, ap = 1, failures = 0, age = 39, ssid[ 9] = "polarbear"
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::powerOn()
Sep 5 00:29:36 Peters-iPod kernel[0] <Debug>: AppleBCMWLANChipManagerSdio4329::downloadFirmware(): start
Sep 5 00:29:36 Peters-iPod kernel[0] <Debug>: AppleBCMWLANChipManagerSdio4329::downloadFirmware(): finish
Sep 5 00:29:36 Peters-iPod kernel[0] <Debug>: BCMWLAN Firmware Version: wl0: Aug 26 2011 02:34:35 version 4.221.54.22
Sep 5 00:29:36 Peters-iPod kernel[0] <Debug>: nvram file version 4.221.54.22
Sep 5 00:29:36 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::initFirmware(): country code set to XX2
Sep 5 00:29:36 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::initFirmware(): Packet glomming ON (mode=7)
Sep 5 00:29:36 Peters-iPod wifid[13] <Error>: WiFi:[368494176.616677]: Processing link event DOWN
Sep 5 00:29:37 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::initFirmware(): There was an existing PNO config, reprogramming
Sep 5 00:29:37 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore:initFirmware(): 2469 RoamScan feature is not enabled for this platform
Sep 5 00:29:37 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::initFirmware(): successful initialization
Sep 5 00:29:37 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore:initFirmware(): 2496 PropTxStatus feature is not enabled for this platform
Sep 5 00:29:37 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(40e3)
Sep 5 00:29:37 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::powerOn()
Sep 5 00:29:37 Peters-iPod UserEventAgent[12] <Warning>: DEBUG: Changing WiFi state: 0
Sep 5 00:29:37 Peters-iPod configd[44] <Notice>: network configuration changed.
Sep 5 00:29:37 Peters-iPod mDNSResponder[34] <Error>: DeregisterInterface: Frequent transitions for interface en0 (192.168.0.95)
Sep 5 00:29:37 Peters-iPod apsd[49] <Warning>: <APSCourier: 0x17a190>: Stream error occurred for <APSTCPStream: 0xfe95de0>: Error Domain=NSPOSIXErrorDomain Code=57 "The operation couldn’-t -b-e -c-o-m-p-l-e-t-e-d-. -S-o-c-k-e-t -i-s -n-o-t -c-o-n-n-e-c-t-e-d-" -U-s-e-r-I-n-f-o-=-0-x-1-8-2-5-e-0 -{-}
Sep 5 00:29:37 Peters-iPod apsd[49] <Warning>: <APSCourier: 0x17a190>: Stream error occurred for <APSTCPStream: 0xfe95e40>: Error Domain=kCFErrorDomainCFNetwork Code=2 "The operation couldn’-t -b-e -c-o-m-p-l-e-t-e-d-. -(-k-C-F-E-r-r-o-r-D-o-m-a-i-n-C-F-N-e-t-w-o-r-k -e-r-r-o-r -2-.-)-" -U-s-e-r-I-n-f-o-=-0-x-f-e-8-e-2-4-0 -{-k-C-F-G-e-t-A-d-d-r-I-n-f-o-F-a-i-l-u-r-e-K-e-y-=-8-}
Sep 5 00:29:39 Peters-iPod wifid[13] <Error>: WiFi:[368494179.091333]: Processing link event UP
Sep 5 00:29:39 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::setASSOCIATE() [wifid]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA2_PSK, key = CIPHER_PMK , don't disassociate .
Sep 5 00:29:39 Peters-iPod kernel[0] <Debug>: [139978.345418625]: AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
Sep 5 00:29:39 Peters-iPod kernel[0] <Debug>: AppleBCMWLAN Joined BSS: @ 0xc067f800, BSSID = 00:18:4d:67:54:12, rssi = -49, rate = 54 (100%), channel = 7, encryption = 0x8, ap = 1, failures = 0, age = 1, ssid[ 9] = "polarbear"
Sep 5 00:29:39 Peters-iPod kernel[0] <Debug>: AirPort: Link Up on en0
Sep 5 00:29:39 Peters-iPod kernel[0] <Debug>: en0: BSSID changed to 00:18:4d:67:54:12
Sep 5 00:29:39 Peters-iPod kernel[0] <Debug>: AppleBCMWLANJoinManager::handleSupplicantEvent(): status = 6, reason = 0, flags = 0x0, authtype = 0, addr = 00:00:00:00:00:00
Sep 5 00:29:40 Peters-iPod kernel[0] <Debug>: [139980.075593458]: AppleBCMWLANNetManager::receivedIPv4Address(): Received address 192.168.0.95, entering powersave mode 2
Sep 5 00:29:40 Peters-iPod configd[44] <Notice>: network configuration changed.
Sep 5 00:29:40 Peters-iPod configd[44] <Notice>: Captive: en0: Not probing 'polarbear' (protected network)
Sep 5 00:29:40 Peters-iPod mDNSResponder[34] <Error>: mDNS_RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:5AB0:35FF:FE35:C9B7)
Sep 5 00:29:40 Peters-iPod mDNSResponder[34] <Error>: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.0.95)
Sep 5 00:29:40 Peters-iPod configd[44] <Notice>: network configuration changed.
Sep 5 00:29:41 Peters-iPod UserEventAgent[12] <Warning>: DEBUG: Changing WiFi state: 1 -
Server dns service will not turn on
Im using Server app 4.0.3
I entered all the info and tried to activate DNS service but it will not turn on. The on button immediately slides back to off. I have watched several tutorials and have tried both basic and advanced setups exactly as shown but the service will not start.Did you check your restriction settings? Go to Settings/General/Restrictions ->location services
If deactivated in restrictions, you might not be able to activate the service in the settings. -
please can somebody help, my imac will not start up, just chimes, apple sign then spinning cog. I have tried many key codes, no success, would really like to talk to someone.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing ' ' 1274181950 464843899 1233118628 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
System PI 7.11 will not start because of R3INLPGM error
Dear experts,
our PI 7.11 sap system will not start on the backup machine. We have two AS/400 machines using IBM iCluster.
On the source node the PI system starts without any problems. If we switch over to the target node,
the PI system will not start. Only the two subsystems R3_<instance> were started and the SAPSTRSVR jobs
ran under QUSRWRK.
In the pool files from SAPSTART we found the following errors:
QPRINT:
R3<SID>400/R3INLPGM: Error occured setting gid to R3GROUP.
QPJOBLOG:
*NONE Information XXXXXXX SAPINLPGM XXXXXXX *STMT SAPINLPGM XXXXXXX *STMT
From module . . . . . . . . : O4TMKLIBIX
From procedure . . . . . . : prtjoblA
Statement . . . . . . . . . : 15
To module . . . . . . . . . : O4TMKLIBIX
To procedure . . . . . . . : prtjoblA
Statement . . . . . . . . . : 15
Message . . . . : SAPINLPGM: Error in ChangeGidToR3GROUP - check whether
R3<SID>400/R3INLPGM is owned by QSECOFR using adopted authority
But the authority from all libs and objects are same as on the source machine.
Any idea?
Best regards,
MatthiasHello Matthias,
Please log on as QSECOFR (or a user with SECOFR authority),
ADDLIBLE SAPXIP71
and run command
FIXSAPOWN SID(*NONE) DIR('/QSYS.LIB/R3XIP400.LIB/R3INLPGM.PGM')
Best regards,
B. Wolf -
My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Settings (and other Apps) Will Not Start (Metro)
This morning most Modern Apps will not start on my system, including the Settings app. It seems to be a DCOM failure and seems directly related to this old thread.
http://social.msdn.microsoft.com/Forums/en-US/7e6fe520-af09-4a38-b333-30ed5978f70c/control-panel-will-not-start-metro?forum=windowsdeveloperpreviewgeneral
This is a current Windows 8.1 installation, full up to date on patches, and the problem still occurs after rebooting. I checked for newly installed patches, etc. and the only thing recent was the Windows Defender definitions update.
It's an i7 with 32 GB of RAM, fast SSD's etc. I don't believe this is a hardware problem in any way.
Here's the details from the System event log:
Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 19-Jun-2014 09:21:53
Event ID: 10001
Task Category: None
Level: Error
Keywords: Classic
User: SARSYS9\Michael Sargent
Computer: SarSys9
Description:
Unable to start a DCOM Server: microsoft.windows.immersivecontrolpanel as Unavailable/Unavailable. The error:
"15612"
Happened while starting this command:
"C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="0">10001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2014-06-19T13:21:53.648625200Z" />
<EventRecordID>546613</EventRecordID>
<Correlation />
<Execution ProcessID="972" ThreadID="4068" />
<Channel>System</Channel>
<Computer>SarSys9</Computer>
<Security UserID="S-1-5-21-802678348-186571299-231467638-1001" />
</System>
<EventData>
<Data Name="param1">"C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel</Data>
<Data Name="param2">15612</Data>
<Data Name="param3">microsoft.windows.immersivecontrolpanel</Data>
<Data Name="param4">Unavailable</Data>
<Data Name="param5">Unavailable</Data>
</EventData>
</Event>
That matches almost exactly with the referenced thread. But that thread never seemed to give a set of steps to resolve the issue (other than doing a Refresh which would be a catastrophic waste of time, reinstalling my whole development environment).
I really would appreciate some help resolving this issue. If I'm in the wrong forum, please move or suggest a more appropriate place.
Thanks,
MikePlease post questions and problems about using Windows in the Windows forums on
http://answers.microsoft.com
The MSDN Windows Store apps forums are for developers to discuss writing their own Windows Store apps.
--Rob
Maybe you are looking for
-
Unable to close the posting periods in MM
Hello while using MMPV the system says that the date not current calender year. If I check OMSY the open year is 2002.I need to know that how you close the open periods of previous years.I am supposed to close all the periods one by one but how to
-
Some problems with snmp catalyst monitoring (sensor values)
Good day for all. Recently in our company was installed some snmp monitoring tool, so now I try to configure it to collect some OID's information. Now i have some bewilderment on some OIS's values: 1. cswSwitchPowerBudget that's OID is 1.3.6.1.4.1.9
-
Many Ways to Update Your Firmware
The reasons for a firmware update differ from printer to printer, however the instructions listed on the website are basically the same. Some firmware updates are required to resolve a specific issue, others enhance features but are not required. Y
-
Error duing iphone sync: The iphone cannot be synced. An unknown error occurred (-50).
I am trying to Sync my 3GS with itunes, and I get the error message: The iphone cannot be synced. An unknown error occurred (-50). Latest rev of itunes installed. Any suggestions on a fix? Starkw1
-
hi, i use this code to f4 help and its working o.k. what i wont is multiple selection like to choose 3 or more employee how i can do that? REPORT ZV_SMART_SEND1. TABLES: PA0002. *DATA: ITAB LIKE PA0002 OCCURS 0 WITH HEADER LINE. DATA: BEGIN OF ITAB