DNS PRoblem in SOLARIS 9.0

Hi
can any one help me on this
I am facing dns problem in solaris sparc 9.0. I am not able to see
" /etc/named.conf" .If i type in.named -v it is showing BIND version .is it required to install bind seprately.
I downloaded BIND from sunfreeware i tried to compile but it is throghing the error something like "make cannot build" after running "./confiugre"
One more query is it possible to install dns and nis server in same solaris box .
could any one guide me how to setup the DNS server and how to configure
Thanks
SolarisTeam

Hi
Thanks for the reply,
It is working fine with the upgraded version of Weblogic 9.0 from weblogic 8.1. But not with the fresh installation of Weblogic 9.0.
Thanks,
Raj

Similar Messages

DNS requests from Solaris 10 box to Bind/MySQL DNS server fail

We have some servers running solaris 9 and some running solaris 10. We also have a DNS server setup running BIND with the MySQL backend. When I query the DNS server from our solaris 9 boxes, they always work just fine. However, when I query the DNS server from our solaris 10 boxes, they always fail. Queries to other DNS servers from the Solaris 10 boxes work just fine - they only fail when being sent to this particular DNS server. Here's exactly what I'm doing:
ON SOLARIS 9 BOX:
bash-3.00$ nslookup google.com calo-sunset
Server: calo-sunset
Address: <IP_OF_DNS_SERVER>#53
Non-authoritative answer:
Name: google.com
Address: 64.233.187.99
Name: google.com
Address: 72.14.207.99
Name: google.com
Address: 209.85.171.99
ON SOLARIS 10 BOX:
bash-2.05$ nslookup google.com calo-sunset
*** Can't find server name for address <IP_OF_DNS_SERVER>: Non-existent host/domain
*** Default servers are not available
In the case of the SOLARIS 10 box, <IP_OF_DNS_SERVER> is correct - it knows the IP address of the DNS server, but apparently it doesn't recognize that it's actually a DNS server.
I am utterly perplexed by this. It seems to me that a DNS request is a DNS request, regardless of your OS. Clearly something is different from Solaris 9 to Solaris 10 though because the requests fail on all of our solaris 10 boxes, and they succeed on all of our Solaris 9 boxes. Incidentally, dig requests from the Solaris 10 box also fail, where they succeed on the Solaris 9 boxes.
I don't really know what other information I could offer that might be useful. If you have any information at all about this or ideas on what I might try to troubleshoot/fix it, I'd love to hear it. Thanks in advance.

First off, I am an idiot. I got this entire post backwards. The fact is that the DNS requests work swimmingly well on our Solaris 10 boxes. They fail on our Solaris 9 boxes. I don't know how I managed to read this post all of these times and not notice that I got that backwards. Nice.
In any case, I've found the problem. It was non-trivial to me because I am not terribly familiar with the inner-workings of DNS. To those who are, it may seem painfully obvious. To me it certainly was not.
The problem was that the DNS server (BIND 9 with MySQL backend) did not contain a reverse DNS entry for itself. Apparently this is a big problem for Solaris 9. I got a hint that this might be the cause when I turned on verbose debugging info when I ran nslookup (nslookup -d2). I had to add the PTR record for the DNS server itself. I don't know why Solaris 9 would require that a DNS server contain reverse DNS information about itself, but sure enough it does. As soon as I added that info, the Solaris 9 boxes were able to successfully query the DNS server. Very odd.
Anyway, I doubt anyone else will come across this problem, but if you do, now you know something that might fix it.
Edited by: dprater on Oct 7, 2008 8:09 PM

Content Server 6.0 Installation problem on Solaris

When I installed Content_Server_6.0_SP1_solaris_oracle on Solaris 10 ,I get the following error in log file.
dbg Bundled JRE is not binary compatible with host OS/Arch or it is corrupt. Testing bundled JRE failed.
How can I resolve it
please help me.
Regards
Sandeep

If I installed any installer for sparc Machine on x86.is there any problem.My Solaris machine is x86.
thanx.
Regards
Sandeep.

I am having a DNS problem with my computer. My laptop connects to the internet and my skype works normally but when i try to surf the web it says "DNS Look up failed".

MY PROBLEM
I am having a DNS problem with my laptop. It connects normally to th e wifi internet but when i try to surf the net it says "DNS Look up failed"
This problem only occurs when with the internet at my house. whenever i connect elsewhere my computer works normally. My ipod, iphone, tablet and other friends computers work normally when they are connected to my internet. i use dmy neigbours nework a couple of times from my house and it wrks normally.
Also when i turn my laptop on or off i can browse for a few minutes or seconds before it fails again. My skype works like there is no problem
WHAT I HAVE TRIED TO RESOLVE IT
I have tried changing the DNS, i used open DNS and google free DNS and it still didnt make a difference.
I have rebooted router many times, nothing
I have changed my home router, nothing
I backed up my computer, resored everything it to factory setting and put everything back on; still nothing
Run a diagnostics at 'Best buy' and they say nothing is wrong; but i know there is something wrong with the DNS
I have tried different "sudo" type of codes on my comupter from stuff i got online and nothign has proved fruitful yet.
i tried using safari, Google chrome and firefox, all not loading
WHAT DO I DO TO FIX THIS?

You are correct. Syncing should transfer any purchased media, including videos, from your device to your iTunes library provided your computer is authorized for the Apple ID used to make these purchases. You mentioned that you have uninstalled iTunes before, but if you didn't follow this guide exactly, uninstalling iTunes and all of its components in the order specified, it may not have been successful so you should try again: Windows XP or Windows Vista/7.

Focus Problem on Solaris with jdk 1.3.1

Hi all,
We are having a focus problem on Solaris. The same code works fine on Windows without any problem.
I am sending the test code and run steps below which you can compile and repeat the problem.
NOTE: When we put a comment on the line "f1.requestFocus();" in TestFocus.java it works OK.
Run Steps :
1. Run TestFocus.class
2. A JFrame appears with 2 text field and a button
3. Try to write something on the text fields. It works OK.
4. Click the button to open a new JFrame
5. A new JFrame opens with a single text field and a button.
6. Click the button to close the second frame
7. You are now on the main JFrame
8. Try to write something on the text fields. It works OK.
9. Repeat the steps 4-7
10. Try to write something on the text fields. You are able to focus and write on the first field. BUT you cannot select or write the second Field!
JAVA SOURCE FILES :
PenHesapListener.java :
public interface PenHesapListener extends java.util.EventListener {
void tamam_actionPerformed(java.util.EventObject newEvent);
void iptal_actionPerformed(java.util.EventObject newEvent);
------PenHesapLisEventMulticaster.java----------------------------------
public class PenHesapLisEventMulticaster extends java.awt.AWTEventMulticaster implements PenHesapListener {
* Constructor to support multicast events.
* @param a java.util.EventListener
* @param b java.util.EventListener
protected PenHesapLisEventMulticaster(java.util.EventListener a, java.util.EventListener b) {
     super(a, b);
* Add new listener to support multicast events.
* @return muhasebe.HesappenListener
* @param a muhasebe.HesappenListener
* @param b muhasebe.HesappenListener
public static PenHesapListener add(PenHesapListener a, PenHesapListener b) {
     return (PenHesapListener)addInternal(a, b);
* Add new listener to support multicast events.
* @return java.util.EventListener
* @param a java.util.EventListener
* @param b java.util.EventListener
protected static java.util.EventListener addInternal(java.util.EventListener a, java.util.EventListener b) {
     if (a == null) return b;
     if (b == null) return a;
     return new PenHesapLisEventMulticaster(a, b);
* @return java.util.EventListener
* @param oldl muhasebe.HesappenListener
protected java.util.EventListener remove(PenHesapListener oldl) {
     if (oldl == a) return b;
     if (oldl == b) return a;
     java.util.EventListener a2 = removeInternal(a, oldl);
     java.util.EventListener b2 = removeInternal(b, oldl);
     if (a2 == a && b2 == b)
          return this;
     return addInternal(a2, b2);
* Remove listener to support multicast events.
* @return muhasebe.HesappenListener
* @param l muhasebe.HesappenListener
* @param oldl muhasebe.HesappenListener
public static PenHesapListener remove(PenHesapListener l, PenHesapListener oldl) {
     if (l == oldl || l == null)
          return null;
     if(l instanceof PenHesapLisEventMulticaster)
          return (PenHesapListener)((PenHesapLisEventMulticaster) l).remove(oldl);
     return l;
public void tamam_actionPerformed(java.util.EventObject newEvent) {
     ((PenHesapListener)a).tamam_actionPerformed(newEvent);
     ((PenHesapListener)b).tamam_actionPerformed(newEvent);
public void iptal_actionPerformed(java.util.EventObject newEvent) {
     ((PenHesapListener)a).iptal_actionPerformed(newEvent);
     ((PenHesapListener)b).iptal_actionPerformed(newEvent);
---------TestFocus2.java-----------------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
public class TestFocus2 extends JFrame implements ActionListener
     protected transient PenHesapListener PenhListener = null ;
     JTextField f10 = null;
     JButton b10= null ;
     JTextField f1 = new JTextField() ;
     JButton b1 = new JButton() ;
     JFrame f20 = null;
     public TestFocus2()
          getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
          getContentPane().add(f1);
          getContentPane().add(b1);
          pack();
          setVisible(true);
          b1.addActionListener(this);
     public void actionPerformed(ActionEvent e)
          if(e.getSource() == b1)
               fireTamam_actionPerformed(e);
     public void addPenHesapListener(PenHesapListener newListener)
          PenhListener = PenHesapLisEventMulticaster.add(PenhListener, newListener);
          return;
     protected void fireTamam_actionPerformed(java.util.EventObject newEvent) {
          PenhListener.tamam_actionPerformed(newEvent);
          this.setVisible(false);
     protected void fireiptal_actionPerformed(java.util.EventObject newEvent) {
          PenhListener.iptal_actionPerformed(newEvent);
     public static void main(String x[])
          TestFocus2 gen01 = new TestFocus2();
--------TestFocus.java-----------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
import java.awt.Container;
public class TestFocus extends JFrame implements ActionListener
     PenKreKart aPenKreKart = null ;
     Container ctn = null;
     JTextField f10 = null;
     JButton b10= null ;
     JTextField f1 = new JTextField() ;
     JTextField f2 = new JTextField() ;
     JButton b1 = new JButton() ;
     JFrame f20 = null;
     public TestFocus()
          //aPenKreKart = new PenKreKart(true);
          //aPenKreKart.aTemelPencere.setVisible(false);
          getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
          getContentPane().add(f1);
          getContentPane().add(f2);
          getContentPane().add(b1);
          pack();
          setVisible(true);
          b1.addActionListener(this);
     public void actionPerformed(ActionEvent e)
          if(e.getSource() == b1)
               pencere_islemi();
     // pencere koyma k?sm? .. begin
     public void pencere_islemi() {
          ctn = this;
          ctn.setEnabled(false);
          TestFocus2 fpen = new TestFocus2();
          //aPenKreKart.aTemelPencere.setVisible(true); //buras?
          //aPenKreKart.aTemelPencere.addPenHesapListener(new PenHesapListener() {
          fpen.addPenHesapListener(new PenHesapListener() {
                    // metod      tamam_actionPerformed begin...
                    public void tamam_actionPerformed(java.util.EventObject newEvent) {
                         ctn.setEnabled(true);
                         ctn.requestFocus();
                         // Problem is when we comment the below line it works .....
                         f1.requestFocus();
                         System.out.println("tamam");
                    // metod      tamam_actionPerformed end...
                    // metod      iptal_actionPerformed begin...
                    public void iptal_actionPerformed(java.util.EventObject newEvent) {
                         ctn.setEnabled(true);
                         ctn.requestFocus();
                         System.out.println("iptal");
                    // metod      iptal_actionPerformed begin...
     // pencere koyma k?sm? .. end
     public static void main(String x[])
          TestFocus gen01 = new TestFocus();

Hi all,
We are having a focus problem on Solaris. The same code works fine on Windows without any problem.
I am sending the test code and run steps below which you can compile and repeat the problem.
NOTE: When we put a comment on the line "f1.requestFocus();" in TestFocus.java it works OK.
Run Steps :
1. Run TestFocus.class
2. A JFrame appears with 2 text field and a button
3. Try to write something on the text fields. It works OK.
4. Click the button to open a new JFrame
5. A new JFrame opens with a single text field and a button.
6. Click the button to close the second frame
7. You are now on the main JFrame
8. Try to write something on the text fields. It works OK.
9. Repeat the steps 4-7
10. Try to write something on the text fields. You are able to focus and write on the first field. BUT you cannot select or write the second Field!
JAVA SOURCE FILES :
PenHesapListener.java :
public interface PenHesapListener extends java.util.EventListener {
void tamam_actionPerformed(java.util.EventObject newEvent);
void iptal_actionPerformed(java.util.EventObject newEvent);
------PenHesapLisEventMulticaster.java----------------------------------
public class PenHesapLisEventMulticaster extends java.awt.AWTEventMulticaster implements PenHesapListener {
* Constructor to support multicast events.
* @param a java.util.EventListener
* @param b java.util.EventListener
protected PenHesapLisEventMulticaster(java.util.EventListener a, java.util.EventListener b) {
     super(a, b);
* Add new listener to support multicast events.
* @return muhasebe.HesappenListener
* @param a muhasebe.HesappenListener
* @param b muhasebe.HesappenListener
public static PenHesapListener add(PenHesapListener a, PenHesapListener b) {
     return (PenHesapListener)addInternal(a, b);
* Add new listener to support multicast events.
* @return java.util.EventListener
* @param a java.util.EventListener
* @param b java.util.EventListener
protected static java.util.EventListener addInternal(java.util.EventListener a, java.util.EventListener b) {
     if (a == null) return b;
     if (b == null) return a;
     return new PenHesapLisEventMulticaster(a, b);
* @return java.util.EventListener
* @param oldl muhasebe.HesappenListener
protected java.util.EventListener remove(PenHesapListener oldl) {
     if (oldl == a) return b;
     if (oldl == b) return a;
     java.util.EventListener a2 = removeInternal(a, oldl);
     java.util.EventListener b2 = removeInternal(b, oldl);
     if (a2 == a && b2 == b)
          return this;
     return addInternal(a2, b2);
* Remove listener to support multicast events.
* @return muhasebe.HesappenListener
* @param l muhasebe.HesappenListener
* @param oldl muhasebe.HesappenListener
public static PenHesapListener remove(PenHesapListener l, PenHesapListener oldl) {
     if (l == oldl || l == null)
          return null;
     if(l instanceof PenHesapLisEventMulticaster)
          return (PenHesapListener)((PenHesapLisEventMulticaster) l).remove(oldl);
     return l;
public void tamam_actionPerformed(java.util.EventObject newEvent) {
     ((PenHesapListener)a).tamam_actionPerformed(newEvent);
     ((PenHesapListener)b).tamam_actionPerformed(newEvent);
public void iptal_actionPerformed(java.util.EventObject newEvent) {
     ((PenHesapListener)a).iptal_actionPerformed(newEvent);
     ((PenHesapListener)b).iptal_actionPerformed(newEvent);
---------TestFocus2.java-----------------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
public class TestFocus2 extends JFrame implements ActionListener
     protected transient PenHesapListener PenhListener = null ;
     JTextField f10 = null;
     JButton b10= null ;
     JTextField f1 = new JTextField() ;
     JButton b1 = new JButton() ;
     JFrame f20 = null;
     public TestFocus2()
          getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
          getContentPane().add(f1);
          getContentPane().add(b1);
          pack();
          setVisible(true);
          b1.addActionListener(this);
     public void actionPerformed(ActionEvent e)
          if(e.getSource() == b1)
               fireTamam_actionPerformed(e);
     public void addPenHesapListener(PenHesapListener newListener)
          PenhListener = PenHesapLisEventMulticaster.add(PenhListener, newListener);
          return;
     protected void fireTamam_actionPerformed(java.util.EventObject newEvent) {
          PenhListener.tamam_actionPerformed(newEvent);
          this.setVisible(false);
     protected void fireiptal_actionPerformed(java.util.EventObject newEvent) {
          PenhListener.iptal_actionPerformed(newEvent);
     public static void main(String x[])
          TestFocus2 gen01 = new TestFocus2();
--------TestFocus.java-----------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
import java.awt.Container;
public class TestFocus extends JFrame implements ActionListener
     PenKreKart aPenKreKart = null ;
     Container ctn = null;
     JTextField f10 = null;
     JButton b10= null ;
     JTextField f1 = new JTextField() ;
     JTextField f2 = new JTextField() ;
     JButton b1 = new JButton() ;
     JFrame f20 = null;
     public TestFocus()
          //aPenKreKart = new PenKreKart(true);
          //aPenKreKart.aTemelPencere.setVisible(false);
          getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
          getContentPane().add(f1);
          getContentPane().add(f2);
          getContentPane().add(b1);
          pack();
          setVisible(true);
          b1.addActionListener(this);
     public void actionPerformed(ActionEvent e)
          if(e.getSource() == b1)
               pencere_islemi();
     // pencere koyma k?sm? .. begin
     public void pencere_islemi() {
          ctn = this;
          ctn.setEnabled(false);
          TestFocus2 fpen = new TestFocus2();
          //aPenKreKart.aTemelPencere.setVisible(true); //buras?
          //aPenKreKart.aTemelPencere.addPenHesapListener(new PenHesapListener() {
          fpen.addPenHesapListener(new PenHesapListener() {
                    // metod      tamam_actionPerformed begin...
                    public void tamam_actionPerformed(java.util.EventObject newEvent) {
                         ctn.setEnabled(true);
                         ctn.requestFocus();
                         // Problem is when we comment the below line it works .....
                         f1.requestFocus();
                         System.out.println("tamam");
                    // metod      tamam_actionPerformed end...
                    // metod      iptal_actionPerformed begin...
                    public void iptal_actionPerformed(java.util.EventObject newEvent) {
                         ctn.setEnabled(true);
                         ctn.requestFocus();
                         System.out.println("iptal");
                    // metod      iptal_actionPerformed begin...
     // pencere koyma k?sm? .. end
     public static void main(String x[])
          TestFocus gen01 = new TestFocus();

Windows 7 VM has DNS Problem When Using Wireless

Hello All,
I've been fighting this virtual machine networking problem for over a week now. If anyone has a well-informed suggestion (not a guess) I would appreciate hearing about it.
Here's the problem in a nutshell and then I'll give more details: I'm running Windows 7 Ultimate (64 bit) as my primary (i.e., host) OS. I'm running Windows 7 Home Professional (32 bit) as the guest OS in "Windows Virtual PC" (note that this is *not* the same as "Virtual PC 2007"). If I configure the VM to use my host's wired Ethernet connection, the guest OS can always see the machines on my local network and can always reach the Internet just fine. On the other hand, if I configure the VM to use only my host's wireless connection then the guest OS can still see machines on my local network but CANNOT reach the Internet, except very intermittently (e.g., for maybe 1-2 minutes every hour or so).
I've tried to anticipate the questions you might ask so here is some additional information:
The computer is a Lenovo W500 laptop running Windows 7 Ultimate, 64-bit. The wireless network adapter is an "Intel WiFi Link 5300 AGN".
My Internet connection is via AT&T DSL using a wire2 wireless modem/router.
I have all the updates from Microsoft and Lenovo for this machine. It is 100% up to date with the latest patches and drivers.
I'm running the 64-bit version (or at least I used the 64 bit installer) of "Windows Virtual PC" which I downloaded from this link.
I am *not* running and I did not download "XP Mode".
When the guest OS loses it's connection to the Internet the following message appears in the Windows Event Log:
"Name resolution for the name address.yahoo.com timed out after none of the configured DNS servers responded."
I am able to ping an external machines outside my network but only if I use the IP address. If I specify the host name it cannot be resolved.
ARE YOU GETTING THE IMPRRESSION THIS IS A DNS PROBLEM??? It looks like I do not have access to a DNS when using the host's wireless connection.
On the host OS, the "Virtual PC Network Filter Driver" *IS* installed and selected under my "Wireless Network Connection Properties" settings.
Below are the results of running ipconfig on the guest OS and then the host OS. Note that I am able to ping 192.168.1.254 from the host OS but not from the guest OS. I think this is the crux of the problem.
Here's what I get from an ipconfig /all executed on the guest OS:
Windows IP Configuration
   Host Name . . . . . . . . . . . . : Win7_01
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Broadcast
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : gateway.2wire.net
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : gateway.2wire.net
   Description . . . . . . . . . . . : Intel 21140-Based PCI Fast Ethernet Adapter (Emulated)
   Physical Address. . . . . . . . . : 00-03-FF-5A-E5-8C
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::6452:ad20:724a:4d3a%11(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.75(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Friday, May 14, 2010 7:22:30 PM
   Lease Expires . . . . . . . . . . : Friday, May 21, 2010 7:22:30 PM
   Default Gateway . . . . . . . . . : 192.168.1.254
   DHCP Server . . . . . . . . . . . : 192.168.1.254
   DHCPv6 IAID . . . . . . . . . . . : 234882047
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-79-57-1A-00-03-FF-5A-E5-8C
   DNS Servers . . . . . . . . . . . : 192.168.1.254
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.gateway.2wire.net:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : gateway.2wire.net
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
And here's what I get when I do ipconfig /all on the host OS:
Windows IP Configuration
   Host Name . . . . . . . . . . . . : LEONA
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Broadcast
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : gateway.2wire.net
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . : gateway.2wire.net
   Description . . . . . . . . . . . : Intel(R) WiFi Link 5300 AGN
   Physical Address. . . . . . . . . : 00-21-6A-59-E5-8C
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::94b0:4080:c30f:95da%12(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.78(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Friday, May 14, 2010 6:20:52 PM
   Lease Expires . . . . . . . . . . : Friday, May 21, 2010 6:20:53 PM
   Default Gateway . . . . . . . . . : 192.168.1.254
   DHCP Server . . . . . . . . . . . : 192.168.1.254
   DHCPv6 IAID . . . . . . . . . . . : 218112362
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-79-34-70-00-22-68-14-2F-CB
   DNS Servers . . . . . . . . . . . : 192.168.1.254
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : gateway.2wire.net
   Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Connection
   Physical Address. . . . . . . . . : 00-22-68-14-2F-CB
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.gateway.2wire.net:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : gateway.2wire.net
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e74:3ca6:3214:b4fb:72d4(Preferred)
   Link-local IPv6 Address . . . . . : fe80::3ca6:3214:b4fb:72d4%13(Preferred)
   Default Gateway . . . . . . . . . : ::
   NetBIOS over Tcpip. . . . . . . . : Disabled

Hello,
I am not very familiar wth Microsoft Security Essentials, but believe that it just makes use of the existing Windows Firewall which is present with the operating system.
To me it is odd that the guest OS reports 192.168.1.254 as the IP address for its gateway and DHCP server yet it cannot access them when pinged. Let's try pinging from host to guest (and vice-versa) and see what happens:
From the host OS at 192.168.1.78, try pinging the guest OS at 192.168.1.75.
Then, from the guest OS at 192.168.1.75, trying ping the host OS at 192.168.1.78.
Is each operating system able to ping each other?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Metainit/striping problem on Solaris 9

We are trying to deploy the Apple XServe RAIDS to customers running Solaris 9. The issue is that Solaris 9 will not recognize a device/LUN that is > 2TB. (No problem with Solaris 10) In trying to solve this problem, we sliced a 7 disk (4.09 TB) RAID into 3 slices. This presents three 1.36TB disks to the Solaris system. Basically, we have 6 disks being presented across both controllers to Solaris. They are direct connected from the XServe to a dual port QLogic HBA. The problem comes in when you try to create a stripe/concatenation across the logical devices being presented. (The disks are being presented on C4 and C5)
Results from a format AFTER I split both 7 disk RAID5s into 3 slices.
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@1c,600000/scsi@2/sd@0,0
1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@1c,600000/scsi@2/sd@1,0
2. c1t2d0 <SEAGATE-ST373307LSUN72G-0507 cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/scsi@2/sd@2,0
3. c1t3d0 <SEAGATE-ST373307LSUN72G-0507 cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/scsi@2/sd@3,0
4. c4t600039300001F461d0 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3/fp@0,0/ssd@w600039300001f461,0
5. c4t600039300001F461d1 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3/fp@0,0/ssd@w600039300001f461,1
6. c4t600039300001F461d2 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3/fp@0,0/ssd@w600039300001f461,2
7. c5t600039300001F2ECd0 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3,1/fp@0,0/ssd@w600039300001f2ec,0
8. c5t600039300001F2ECd1 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3,1/fp@0,0/ssd@w600039300001f2ec,1
9. c5t600039300001F2ECd2 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3,1/fp@0,0/ssd@w600039300001f2ec,2
Specify disk (enter its number):
Results of the cfgadm command. You will see there three logical devices presented to each controller. Six disks.
cfgadm -al -o showFCPdev
Ap_Id Type Receptacle Occupant Condition
c4 fc-private connected configured unknown
c4::600039300001f461,0 disk connected configured unknown
c4::600039300001f461,1 disk connected configured unknown
c4::600039300001f461,2 disk connected configured unknown
c5 fc-private connected configured unknown
c5::600039300001f2ec,0 disk connected configured unknown
c5::600039300001f2ec,1 disk connected configured unknown
c5::600039300001f2ec,2 disk connected configured unknown
Trying to initialize a 6 device stripe via Solaris Volume Manager (AKA disksuite)
metainit -f d77 6 1 c4t600039300001F461d0s0 1 c4t600039300001F461d1s0 1 c4t600039300001F461d2s0 1 c5t600039300001F2ECd0s0 1 c5t600039300001F2ECd1s0 1 c5t600039300001F2ECd2s0
I receive the following error:
metainit: hostname: c4t600039300001F461d1s0: overlaps with device in d77
I tried to do a work around where I create three striped devices then concatenate them:
Creating the first 2 device stripe across controllers c4 and c5 (1 device each)
metainit -f d77 2 1 c4t600039300001F461d0s0 1 c5t600039300001F2ECd0s0
I was able to create the first metadevice d77 using one logical LUN from each controller.
When I tried to create a second metadevice across the controllers: (Using d1 from each controller)
metainit -f d78 2 1 c4t600039300001F461d1s0 1 c5t600039300001F2ECd1s0
metainit: hostneme: c4t600039300001F461d1s0: overlaps with device in d77
I received the same error.
In doing some reaearch, it seems the problem is due to a problem with the disk duplication process, disk device IDs stored on the disks are not unique. I was curious if this is the problem that Apple presents the split disks with the SAME diskid? Has anybody else successfully created stripes (due to a LUN size limit) across the disk successfully on a Solaris system?

I contacted Sun and here is an explination from them. I also noticed when I queried the Xserver RAIDS, there were no serial numbers.
Solaris 9 can support a 16Tb filesystem, but there is a scsi limitation on the device of 2Tb. So you are stuck with striping together several smaller devices if you want a single filesystem above 2Tb.
The problem you are having when metainit reports an overlap comes from the way Solaris Volume Manager identifies devices. The portion of the scsi inquiry that is returned is always unique when Sun firmware is involved, but in your case is not unique.
You may be able to make use of the appended infodoc to avoid this problem. I see no evidence of our having tested this with your particular scenario, but it has been successful in similar cases.
You might also inquire of whoever supports your storage device whether a mode is supported whereby the device's inquiry strings can be made unique.
Here is the steps he wanted me to take and the results. I still can not get the Xserve RAIDS to generate a unique device id:
Step 1
Determine the vendor and product strings. You can run these commands:
# netstat -k | grep -i vendor
# netstat -k | grep -i product
netstat -k | grep -i vendor
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
grep -i product
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
or you can run
# format -e
then select scsi, then inquiry.
scsi> inq
Inquiry:
00 00 05 12 5b 00 00 02 41 50 50 4c 45 20 20 20 ....[...APPLE
58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 Xserve RAID
31 2e 35 31 63 00 00 00 00 00 00 00 00 00 00 00 1.51c...........
00 00 00 00 00 00 00 00 00 00 0d 40 0d a0 0e 20 ...........@...
0d 80 09 00 0a 00 00 20 00 00 00 20 20 20 20 20 ....... ...
20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
Vendor: APPLE
Product: Xserve RAID
Revision: 1.51
Removable media: no
Device type: 0
ISO version: 0
ECMA version: 0
ANSI version: 5
Async event notification: no
Terminate i/o process msg: no
Response data format: 2
Additional length: 91
Relative addressing: no
32 bit transfers: no
16 bit transfers: no
Synchronous transfers: no
Linked commands: no
Command queueing: yes
Soft reset option: no
Step 2
Add an entry in the file '/kernel/drv/sd.conf'.
sd-config-list=
"APPLE Xserve RAID ", "AppleRAID";
AppleRAID=1,0x8,0,0,0,0,0;
Step 3 Reboot.
Step 4 Check with SUNWexplo.
[email protected]:[/opt/SUNWexplo/bin] (8)# ./diskinfo.sparc
/dev/rdsk/c0t0d0s2: Device busy
AVAILABLE SCSI DEVICES:
Location Vendor Product Rev Serial #
c1t0d0 COMPAQ BD036863AC HPB5 B2FT4HMM
c1t1d0 SEAGATE ST336607LSUN36G 0507 0349A66VKQ
c1t2d0 SEAGATE ST373307LSUN72G 0507 0417B7C9ZC
c1t3d0 SEAGATE ST373307LSUN72G 0507 0425B7LV5Q
c4t600039300001F461d0 APPLE Xserve RAID 151 c
c4t600039300001F461d1 APPLE Xserve RAID 151 c
c4t600039300001F461d2 APPLE Xserve RAID 151 c
c5t600039300001F2ECd0 APPLE Xserve RAID 151 c
c5t600039300001F2ECd1 APPLE Xserve RAID 151 c
As you will notice, there are no serial numbers in this command or netstat -k | grep -i product commands.

Rsh disconnect problems in Solaris 10

My company uses rsh to transmit data to proprietary cards, from Ultra 25's running Solaris 10. We're experiencing random timeouts. The error is rsh connection timeout.
We never had this problem on Solaris 8 or Solaris 7.
Has anyone run across this before? It's to random to run snoop on. Thanks Mark

type passwd mgcusr as root. then you'll need to type new password for that user.

DNS Server on Solaris 10

Hi. I'm trying to install DNS in a Solaris 10, But there is some strange and is that the inetd file is so short, and in the rc2.d directory isn't the S72inetsvc that is the file that start | stop -TCP services. I copied that file from another server and this is the message :
"starting internet domain name server.
inetd is now an smf(5) managed service and can no longer be run from the
command line. "
Any knows haw can I do to fix it?
Thanks.
Francisco Velasco

From my latest efforts ( any corrections or improvements would be appreciated)
Reconfigure Services
( from http://src.opensolaris.org/source/xref/sfw/usr/src/pkgdefs/SUNWbindr/postinstall )
Dnsint04> svcprop p option/ip_interfaces dns/server:default
all
dnsint04> svcprop p options/configuration_file dns/server:default
Dnsint04> svccfg s dns/server:default setprop options/ip_interfaces=IPv4
Dnsint04> svccfg s dns/server:default setprop options/configuration_file=/etc/named.conf
Dnsint04> svcadm refresh dns/server:default
Dnsint04> svcprop p option/ip_interfaces dns/server:default
all
dnsint04> svcprop p options/configuration_file dns/server:default
/etc/named.conf
Dnsint04> vi /lib/svc/method/dns-server
     Change server=/usr/sbin/named to server=/usr/local/sbin/namedInstall BIND
# mkdir /usr/named
# cd /var
# ln s /usr/named named
# mount /nfs/OS-INSTALL
# cd /opt/PATCHES
# cp /nfs/OS-INSTALL/Solaris/bind-9.5.0-P1.tar.gz /opt/PATCHES
# gzcat bind-9.5.0-P1.tar.gz | tar xvf
# cd bind-9.5.0-P1
# ./configure disable-threads
# make
# make install
.pwd
# vi /root/.profile     Add /usr/local/sbin to the PATH statement (/usrbin:/usr/sbin:/usr/local/sbin: )
Confirguing BIND:
-     when the software is finished doing the installation, you have to create the /var/named/ directory and /etc/named.conf file. Depending on what type of DNS server you wish to create:
Primary:
-     review the configuration on the DNSEXT01(secondary external DNS), DNSEXT02(primary external DNS), DNSINT01(primary internal DNS) or DNSINT02(secondary internal DNS) server. In short find one and copy over the /etc/named.conf and /var/named-int/.named.root /var/named-ext/.named.root.
-     Allow transfer from dnsint01 ( or the current primary ) by editing /etc/named.conf on that box.
-     Stop and restart named on the primary.
-     Start named on the new box
-     Watch /var/adm/messages on both primary and newbox for errors
-     You should start seeing the db files populating in /var/named-int and /var/named-ext on the new box.
Secondary
-     review the configuration on the DNSEXT01(secondary external DNS), DNSEXT02(primary external DNS), DNSINT01(primary internal DNS) or DNSINT02(secondary internal DNS) server. In short find one and copy over the /etc/named.conf and /var/named-int/.named.root. /var/named-ext/.named.root.
-     Allow transfer from dnsint01 ( or the current primary ) by editing /etc/named.conf on that box.
-     Stop and restart named on the primary.
-     Start named on the new box
-     Watch /var/adm/messages on both primary and newbox for errors
-     You should start seeing the db files populating in /var/named on the new box.

Database DNS problem while uploading jsp's

We create DNS while working with localhost on winodws machine but when we upload the jsp's and database then how do we manage the DNS problem do we have to create the DNS there too or there is some other way out

Sorry for spelling mistake actually it was DSN data source that had been asked

DNS problems on Lion

Hello,
Ever since I "upgraded" to Lion I have had DNS issues.
I know it's a DNS problem because IP addresses work fine. And I know it's not a browser issue, because I am running 'ping google.com' from the command line.
The symptoms are non-responsive queries to DNS servers, in web browsers or the command line (using ping). Currently I am using google's DNS servers: 8.8.8.8 and 8.8.4.4. I'm absolutely sure that there is nothing wrong with those servers. The request to the DNS servers eventually times out, and then I hit "Refresh" and the page loads fine.
Also, if I recylce the network adapter, e.g.
$ sudo ifconfig en1 down
$ sudo ifconfig en1 up
DNS starts working again, temporarily until the next time. It happens again (randomly, not at regular intervals), I then run the ifconfig down/up again, and DNS works again, and so on.
This started happening when I went to Lion.
Thank you

I have just purchased a brand new Mac Mini Server with Lion Server running. Managed to set up DNS service and 5 zones configured and running fine for 1 to 2 days.
The DNS in Server Admin suddenly stopped loading the information and buttons are all greyed out last night, with no changes made since I was away at work. It keeps getting the same situation as thread starter mentioned. I have tried all possible means but it just stop loading zones information anymore.
I would like to try John's approach but it seems I am unable to get 'root' access to perform those actions. Thus would appreciate some advice on how to proceed forward to resolve the issue.
1. Tried the Directory Utility approach to "Enable Root" but when enter terminal, 'sudo root' does not seem to accept the password I have set. Is there any other means to enable an account to have sufficient access to perform those DNS related resolution steps?
2. Is there any location to obtain a copy of the default named.conf?

Problems with Solaris 11 11/11

Hi,
I need your help because I have problems with Solaris 11 11/11 installed in a Dell Latitude E4310.
Here, there are the problems:
1- No it power off with shutdown or init 5 or init 0 only work well the reboot.
2- It can not connect to the wifi with wpa, no receive ip by dhcp, the driver of the card is "iwp"
Thanks.
Jorge
Edited by: jdangelo on Nov 16, 2011 1:49 PM
Edited by: jdangelo on Nov 17, 2011 2:51 PM

Here is the info of my laptop;
Manufacture name:Dell Inc.
Manufacture model:Latitude E4310
64 Bit:True
OS version:SunOS solaris 5.11 11.0 i86pc i386 i86pc
CPU Type:Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz
CPU Number:1
Number Of Cores Per Processor:2
Number Of Threads Per Processor:4
Bios/Firmware Maker:Dell Inc. Version:A05 Release Date:11/20/2010
prtconf -pv:
System Configuration: Oracle Corporation i86pc
Memory size: 3958 Megabytes
System Peripherals (PROM Nodes):
Node 0x000001
bios-boot-device: '80'
stdout: 00000000
name: 'i86pc'
Node 0x000002
existing: 00c21000.00000000.02bc6001.00000000
name: 'ramdisk'
Node 0x000003
acpi-namespace: '\_SB_.PCI0'
compatible: 'pciex_root_complex'
device_type: 'pciex'
reg: 00000000.00000000.00000000.00000000.00000000
#size-cells: 00000002
#address-cells: 00000003
name: 'pci'
Node 0x000004
reg: 00000000.00000000.00000000.00000000.00000000
compatible: 'pci8086,44.1028.410.2' + 'pci8086,44.1028.410' + 'pci1028,410' + 'pci8086,44.2' + 'pci8086,44' + 'pciclass,060000' + 'pciclass,0600'
model: 'Host bridge'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000000
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '0'
class-code: 00060000
revision-id: 00000002
vendor-id: 00008086
device-id: 00000044
name: 'pci1028,410'
Node 0x000005
acpi-namespace: '\_SB_.PCI0.VID_'
assigned-addresses: 83001010.00000000.f0000000.00000000.00400000.c3001018.00000000.e0000000.00000000.10000000.81001020.00000000.000060b0.00000000.00000008.a1001000.00000000.000003b0.00000000.0000000c.a1001000.00000000.000003c0.00000000.00000020.a2001000.00000000.000a0000.00000000.00020000
reg: 00001000.00000000.00000000.00000000.00000000.03001010.00000000.00000000.00000000.00400000.43001018.00000000.00000000.00000000.10000000.01001020.00000000.00000000.00000000.00000008.a1001000.00000000.000003b0.00000000.0000000c.a1001000.00000000.000003c0.00000000.00000020.a2001000.00000000.000a0000.00000000.00020000
compatible: 'pci8086,46.1028.410.2' + 'pci8086,46.1028.410' + 'pci1028,410' + 'pci8086,46.2' + 'pci8086,46' + 'pciclass,030000' + 'pciclass,0300'
model: 'VGA compatible controller'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000000
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
device_type: 'display'
unit-address: '2'
class-code: 00030000
revision-id: 00000002
vendor-id: 00008086
device-id: 00000046
name: 'display'
Node 0x000006
acpi-namespace: '\_SB_.PCI0.GLAN'
assigned-addresses: 8200c810.00000000.f5400000.00000000.00020000.8200c814.00000000.f5480000.00000000.00001000.8100c818.00000000.00006040.00000000.00000020
reg: 0000c800.00000000.00000000.00000000.00000000.0200c810.00000000.00000000.00000000.00020000.0200c814.00000000.00000000.00000000.00001000.0100c818.00000000.00000000.00000000.00000020
compatible: 'pci8086,10ea.1028.410.5' + 'pci8086,10ea.1028.410' + 'pci1028,410' + 'pci8086,10ea.5' + 'pci8086,10ea' + 'pciclass,020000' + 'pciclass,0200'
model: 'Ethernet controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '19'
class-code: 00020000
revision-id: 00000005
vendor-id: 00008086
device-id: 000010ea
name: 'pci1028,410'
Node 0x000007
acpi-namespace: '\_SB_.PCI0.EHC2'
assigned-addresses: 8200d010.00000000.f5470000.00000000.00000400
reg: 0000d000.00000000.00000000.00000000.00000000.0200d010.00000000.00000000.00000000.00000400
compatible: 'pci8086,3b3c.1028.410.5' + 'pci8086,3b3c.1028.410' + 'pci1028,410' + 'pci8086,3b3c.5' + 'pci8086,3b3c' + 'pciclass,0c0320' + 'pciclass,0c03'
model: 'Universal Serial Bus EHCI compliant'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1a'
class-code: 000c0320
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b3c
name: 'pci1028,410'
Node 0x000008
acpi-namespace: '\_SB_.PCI0.HDEF'
assigned-addresses: 8300d810.00000000.f5460000.00000000.00004000
reg: 0000d800.00000000.00000000.00000000.00000000.0300d810.00000000.00000000.00000000.00004000
compatible: 'pciex8086,3b57.1028.410.5' + 'pciex8086,3b57.1028.410' + 'pciex8086,3b57.5' + 'pciex8086,3b57' + 'pciexclass,040300' + 'pciexclass,0403' + 'pci8086,3b57.1028.410.5' + 'pci8086,3b57.1028.410' + 'pci1028,410' + 'pci8086,3b57.5' + 'pci8086,3b57' + 'pciclass,040300' + 'pciclass,0403'
model: 'Mixed Mode device'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1b'
class-code: 00040300
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b57
name: 'pci1028,410'
Node 0x000009
acpi-namespace: '\_SB_.PCI0.RP01'
slot-names: 00000001.746f6c53.00003333
reg: 0000e000.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b42.5' + 'pciex8086,3b42' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b42.5' + 'pci8086,3b42' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00005000.81000000.00000000.00005000.00000000.00001000.82000000.00000000.f4000000.82000000.00000000.f4000000.00000000.01400000
bus-range: 00000001.00000001
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000000
devsel-speed: 00000000
interrupts: 00000001
unit-address: '1c'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b42
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b42'
Node 0x00000a
acpi-namespace: '\_SB_.PCI0.RP02'
slot-names: 00000001.746f6c53.00003433
reg: 0000e100.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b44.5' + 'pciex8086,3b44' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b44.5' + 'pci8086,3b44' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00004000.81000000.00000000.00004000.00000000.00001000.82000000.00000000.f2c00000.82000000.00000000.f2c00000.00000000.01400000
bus-range: 00000002.00000002
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000001
devsel-speed: 00000000
interrupts: 00000002
unit-address: '1c,1'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b44
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b44'
Node 0x000013
acpi-namespace: '\_SB_.PCI0.RP02.PXSX'
assigned-addresses: 83020010.00000000.f2c00000.00000000.00002000
reg: 00020000.00000000.00000000.00000000.00000000.03020010.00000000.00000000.00000000.00002000
compatible: 'pciex8086,422c.8086.1321.35' + 'pciex8086,422c.8086.1321' + 'pciex8086,422c.35' + 'pciex8086,422c' + 'pciexclass,028000' + 'pciexclass,0280' + 'pci8086,422c.8086.1321.35' + 'pci8086,422c.8086.1321' + 'pci8086,1321' + 'pci8086,422c.35' + 'pci8086,422c' + 'pciclass,028000' + 'pciclass,0280'
model: 'Network controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 00008086
subsystem-id: 00001321
unit-address: '0'
class-code: 00028000
revision-id: 00000035
vendor-id: 00008086
device-id: 0000422c
name: 'pci8086,1321'
Node 0x00000b
acpi-namespace: '\_SB_.PCI0.RP03'
slot-names: 00000001.746f6c53.00000038
reg: 0000e200.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b46.5' + 'pciex8086,3b46' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b46.5' + 'pci8086,3b46' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00003000.81000000.00000000.00003000.00000000.00001000.82000000.00000000.f1800000.82000000.00000000.f1800000.00000000.01400000
bus-range: 00000003.00000003
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000002
devsel-speed: 00000000
interrupts: 00000003
unit-address: '1c,2'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b46
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b46'
Node 0x000014
acpi-namespace: '\_SB_.PCI0.RP03.PXSX'
assigned-addresses: 82030010.00000000.f1830000.00000000.00000100
reg: 00030000.00000000.00000000.00000000.00000000.02030010.00000000.00000000.00000000.00000100
compatible: 'pciex1180,e822.1028.410.1' + 'pciex1180,e822.1028.410' + 'pciex1180,e822.1' + 'pciex1180,e822' + 'pciexclass,080500' + 'pciexclass,0805' + 'pci1180,e822.1028.410.1' + 'pci1180,e822.1028.410' + 'pci1028,410' + 'pci1180,e822.1' + 'pci1180,e822' + 'pciclass,080500' + 'pciclass,0805'
model: 'SD Host controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '0'
class-code: 00080500
revision-id: 00000001
vendor-id: 00001180
device-id: 0000e822
name: 'pci1028,410'
Node 0x00000c
acpi-namespace: '\_SB_.PCI0.RP04'
slot-names: 00000001.746f6c53.00000039
reg: 0000e300.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b48.5' + 'pciex8086,3b48' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b48.5' + 'pci8086,3b48' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00002000.81000000.00000000.00002000.00000000.00001000.82000000.00000000.f0400000.82000000.00000000.f0400000.00000000.01400000
bus-range: 00000004.00000009
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000003
devsel-speed: 00000000
interrupts: 00000004
unit-address: '1c,3'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b48
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b48'
Node 0x00000d
acpi-namespace: '\_SB_.PCI0.EHCI'
assigned-addresses: 8200e810.00000000.f5450000.00000000.00000400
reg: 0000e800.00000000.00000000.00000000.00000000.0200e810.00000000.00000000.00000000.00000400
compatible: 'pci8086,3b34.1028.410.5' + 'pci8086,3b34.1028.410' + 'pci1028,410' + 'pci8086,3b34.5' + 'pci8086,3b34' + 'pciclass,0c0320' + 'pciclass,0c03'
model: 'Universal Serial Bus EHCI compliant'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1d'
class-code: 000c0320
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b34
name: 'pci1028,410'
Node 0x00000e
acpi-namespace: '\_SB_.PCI0.P0P1'
slot-names: 0000002f.746f6c53.6c530031.0032746f.746f6c53.6c530033.0034746f.746f6c53.00000032
reg: 0000f000.00000000.00000000.00000000.00000000
compatible: 'pci8086,2448.a5' + 'pci8086,2448' + 'pciclass,060401' + 'pciclass,0604'
model: 'Subtractive Decode PCI-PCI bridge'
bus-range: 0000000a.0000000a
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pci'
power-consumption: 00000001.00000001
devsel-speed: 00000000
unit-address: '1e'
class-code: 00060401
revision-id: 000000a5
vendor-id: 00008086
device-id: 00002448
name: 'pci8086,2448'
Node 0x00000f
#size-cells: 00000001
#address-cells: 00000002
ranges: 00000001.00000000.81000000.00000000.00000000.00000022.00000001.00000024.81000000.00000000.00000024.00000002.00000001.00000028.81000000.00000000.00000028.00000002.00000001.0000002c.81000000.00000000.0000002c.00000006.00000001.00000034.81000000.00000000.00000034.00000002.00000001.00000038.81000000.00000000.00000038.00000002.00000001.0000003c.81000000.00000000.0000003c.00000002.00000001.00000040.81000000.00000000.00000040.00000004.00000001.0000004e.81000000.00000000.0000004e.00000006.00000001.00000060.81000000.00000000.00000060.00000002.00000001.00000063.81000000.00000000.00000063.00000003.00000001.00000067.81000000.00000000.00000067.00000001.00000001.00000070.81000000.00000000.00000070.00000008.00000001.00000070.81000000.00000000.00000070.00000001.00000001.00000080.81000000.00000000.00000080.00000022.00000001.000000a4.81000000.00000000.000000a4.00000002.00000001.000000a8.81000000.00000000.000000a8.00000002.00000001.000000ac.81000000.00000000.000000ac.00000002.00000001.000000b0.81000000.00000000.000000b0.00000006.00000001.000000b8.81000000.00000000.000000b8.00000002.00000001.000000bc.81000000.00000000.000000bc.00000002.00000001.000000c0.81000000.00000000.000000c0.00000020.00000001.000000f0.81000000.00000000.000000f0.00000001.00000001.00000400.81000000.00000000.00000400.00000080.00000001.000004d0.81000000.00000000.000004d0.00000002.00000001.00000500.81000000.00000000.00000500.00000080.00000001.00000680.81000000.00000000.00000680.00000020.00000001.00000930.81000000.00000000.00000930.00000001.00000001.00000934.81000000.00000000.00000934.00000001.00000001.00000cf8.81000000.00000000.00000cf8.00000008.00000001.00001000.81000000.00000000.00001000.00000014.00000001.0000164e.81000000.00000000.0000164e.00000002.00000001.0000ffff.81000000.00000000.0000ffff.00000001.00000000.f54c0000.82000000.00000000.f54c0000.00001000.00000000.f8000000.82000000.00000000.f8000000.04000000.00000000.fed00000.82000000.00000000.fed00000.00000400.00000000.fed10000.82000000.00000000.fed10000.00004000.00000000.fed18000.82000000.00000000.fed18000.00002000.00000000.fed1c000.82000000.00000000.fed1c000.00024000.00000000.fed45000.82000000.00000000.fed45000.0004b000.00000000.fee00000.82000000.00000000.fee00000.00100000.00000000.ff000000.82000000.00000000.ff000000.01000000.00000000.ff000000.82000000.00000000.ff000000.01000000
acpi-namespace: '\_SB_.PCI0.LPCB'
device_type: 'isa'
reg: 0000f800.00000000.00000000.00000000.00000000
compatible: 'pci8086,3b0f.1028.410.5' + 'pci8086,3b0f.1028.410' + 'pci1028,410' + 'pci8086,3b0f.5' + 'pci8086,3b0f' + 'pciclass,060100' + 'pciclass,0601'
model: 'ISA bridge'
power-consumption: 00000001.00000001
devsel-speed: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f'
class-code: 00060100
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b0f
name: 'isa'
Node 0x00001c
unit-address: '1,60'
interrupts: 00000001.0000000c
reg: 00000001.00000060.00000001.00000001.00000064.00000001
name: 'i8042'
Node 0x00001d
compatible: 'pnpPNP,303'
device-type: 'keyboard'
interrupts: 00000001.0000000c
reg: 00000000
acpi-namespace: '\_SB_.PCI0.LPCB.PS2K'
model: 'System keyboard'
name: 'keyboard'
Node 0x00001e
compatible: 'pnpPNP,f03'
device-type: 'mouse'
reg: 00000001
interrupts: 0000000c
acpi-namespace: '\_SB_.PCI0.LPCB.PS2M'
model: 'PS/2 Port for PS/2-style Mice'
name: 'mouse'
Node 0x00001f
interrupts: 00000004
reg: 00000001.000003f8.00000008
model: 'Standard serial port'
compatible: 'PNP0500'
name: 'asy'
Node 0x000010
acpi-namespace: '\_SB_.PCI0.SAT0'
assigned-addresses: 8100fa10.00000000.00006090.00000000.00000008.8100fa14.00000000.00006080.00000000.00000004.8100fa18.00000000.00006070.00000000.00000008.8100fa1c.00000000.00006060.00000000.00000004.8100fa20.00000000.00006020.00000000.00000020.8200fa24.00000000.f5440000.00000000.00000800
reg: 0000fa00.00000000.00000000.00000000.00000000.0100fa10.00000000.00000000.00000000.00000008.0100fa14.00000000.00000000.00000000.00000004.0100fa18.00000000.00000000.00000000.00000008.0100fa1c.00000000.00000000.00000000.00000004.0100fa20.00000000.00000000.00000000.00000020.0200fa24.00000000.00000000.00000000.00000800
compatible: 'pci8086,3b2f.1028.410.5' + 'pci8086,3b2f.1028.410' + 'pci1028,410' + 'pci8086,3b2f.5' + 'pci8086,3b2f' + 'pciclass,010601' + 'pciclass,0106'
model: 'SATA AHCI 1.0 Interface'
power-consumption: 00000001.00000001
66mhz-capable:
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000003
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f,2'
class-code: 00010601
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b2f
name: 'pci1028,410'
Node 0x000011
acpi-namespace: '\_SB_.PCI0.SBUS'
assigned-addresses: 8300fb10.00000000.f5430000.00000000.00000100.8100fb20.00000000.00006000.00000000.00000020
reg: 0000fb00.00000000.00000000.00000000.00000000.0300fb10.00000000.00000000.00000000.00000100.0100fb20.00000000.00000000.00000000.00000020
compatible: 'pci8086,3b30.1028.410.5' + 'pci8086,3b30.1028.410' + 'pci1028,410' + 'pci8086,3b30.5' + 'pci8086,3b30' + 'pciclass,0c0500' + 'pciclass,0c05'
model: 'SMBus (System Management Bus)'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000003
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f,3'
class-code: 000c0500
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b30
name: 'pci1028,410'
Node 0x000012
assigned-addresses: 8300fe10.00000000.f5420000.00000000.00001000
reg: 0000fe00.00000000.00000000.00000000.00000000.0300fe10.00000000.00000000.00000000.00001000
compatible: 'pci8086,3b32.1028.410.5' + 'pci8086,3b32.1028.410' + 'pci1028,410' + 'pci8086,3b32.5' + 'pci8086,3b32' + 'pciclass,118000' + 'pciclass,1180'
model: 'DSP/DAP controllers'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000003
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f,6'
class-code: 00118000
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b32
name: 'pci1028,410'
Node 0x000015
device_type: 'acpirootnex'
compatible: 'SOLA0001' + 'acpirootnex' + 'SOLA0002' + 'acpivirtnex'
acpi-namespace: '\'
name: 'fw'
Node 0x000016
unit-address: '1'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000000
acpi-processor-id: 00000001
acpi-namespace: '\_PR_.CPU0'
device_type: 'acpicpu'
name: 'cpu'
Node 0x000017
unit-address: '2'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000004
acpi-processor-id: 00000002
acpi-namespace: '\_PR_.CPU1'
device_type: 'acpicpu'
name: 'cpu'
Node 0x000018
unit-address: '3'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000001
acpi-processor-id: 00000003
acpi-namespace: '\_PR_.CPU2'
device_type: 'acpicpu'
name: 'cpu'
Node 0x000019
unit-address: '4'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000005
acpi-processor-id: 00000004
acpi-namespace: '\_PR_.CPU3'
device_type: 'acpicpu'
name: 'cpu'
Node 0x00001a
unit-address: '0'
compatible: 'acpidevice' + 'SOLA0002' + 'acpivirtnex'
acpi-namespace: '\_SB_'
device_type: 'acpidevice'
name: 'sb'
Node 0x00001b
io-space: 00000000.00000020.00000020.00000002.00000024.00000002.00000028.00000002.0000002c.00000002.0000002e.00000002.00000030.00000002.00000034.00000002.00000038.00000002.0000003c.00000002.00000040.00000004.0000004e.00000002.00000050.00000004.00000060.00000001.00000061.00000001.00000063.00000001.00000064.00000001.00000065.00000001.00000067.00000001.00000070.00000008.00000070.00000001.00000080.00000001.00000081.00000011.00000092.00000001.00000093.0000000d.000000a0.00000002.000000a4.00000002.000000a8.00000002.000000ac.00000002.000000b0.00000002.000000b2.00000002.000000b4.00000002.000000b8.00000002.000000bc.00000002.000000c0.00000020.000000f0.00000001.00000400.00000080.000004d0.00000002.00000500.00000080.00000680.00000020.00000930.00000001.00000934.00000001.00000cf8.00000008.00001000.00000004.00001004.00000010.0000164e.00000002.0000ffff.00000001
device-memory: f54c0000.00001000.f8000000.04000000.fed00000.00000400.fed10000.00004000.fed18000.00001000.fed19000.00001000.fed1c000.00004000.fed20000.00020000.fed45000.0004b000.fee00000.00100000.ff000000.01000000.ff000000.01000000
dma-channels: 00000004
interrupts: 00000000.00000001.00000002.00000008.0000000c.0000000d
name: 'used-resources'
prtdiag:
System Configuration: Dell Inc. Latitude E4310
BIOS Configuration: Dell Inc. A05 11/20/2010
==== Processor Sockets ====================================
Version Location Tag
Intel(R) Core(TM) i5 CPU M 560 @ 2.67GH CPU 1
==== Memory Device Sockets ================================
Type Status Set Device Locator Bank Locator
Unknown in use 0 DIMM_A BANK 0
unknown empty 0 DIMM_B BANK 2
==== On-Board Devices =====================================
"Intel GM45 Graphics"
NETWORK_NAME_STRING
==== Upgradeable Slots ====================================
ID Status Type Description
0 available PCI Express x16 J5C1
1 available PCI Express J6C2
2 in use PCI Express J6D2
3 in use PCI Express J7C1
4 available PCI Express J7D2
System Information:
Manufacturer:Dell Inc.
Product:Latitude E4310
BIOS Information:
Vendor:Dell Inc.
Version:A05
Release Date:11/20/2010
BIOS Revision: BIOS Revision:4.6
Firmware Revision:
MotherBoard Information:
Product:0D8H24
Manufacturer:Dell Inc.
Version:A00
Onboard Devices:[Video,Disabled]"Intel GM45 Graphics"
CPU Information:
Processor 0:
Processor Socket Type:CPU 1
Processor Manufacturer:Intel
Current Voltage:0.0V
External Clock:533MHZ
Max Speed:4000MHZ
Current Speed:2666MHZ
Memory Information:
Physical Memory: 4G (4G)
Maximum Memory Support: 4096G
Memory Subsystem 0:
Array Used Function:System memory
Memory Error Correction Supported:None
Maximum Array Capacity:8G
Number of Memory Devices:2
Memory Device 0:
Memory Device Locator:DIMM_A
Total Width:64
Data Width:64
Installed Size:4096M
Memory Device Type:Unknown
Speed:1067MHZ
Memory Device 1:
[Not Installed]

Openwindows dt libs problems in Solaris 2.8

Hello
My Motif Apps work fine with solaris 2.6
Now, we are moving to solaris 2.8.
I compiled the SAME source code in solaris 2.8 - this App have a different look and feel - like fonts being different, bgcolor, etc.
however, if i compile with solaris 2.6 /usr/dt/lib and /usr/openwin/lib - all looks similar
can anyone point the problems with solaris 2.8
/usr/dt/lib and /usr/openwin/lib
Thanks,
venkat

Are you using the same dot files, from the same
login account in each case? This sounds like some
local settings are different. Using different
monitors can make a difference, too. There are two
different systems with the same monitor which you
are using from the same home dir?

Strange DNS problems wrt160n v2

My router worked fine with 60mbit internet, i bumped up to 90mbit, and it worked fine for 2 weeks or so, and then one day my desktop, with a wired connection, started to go nuts with the DNSserver, what screwed up the internet, pages would not load, when i refreshed the page it would load, but 5 or 6 mouseclicks further and the DNS was gone again... i changed everything, all the settings, the utp cable, even Vista had to go, just to be sure.. but nothing worked, except removing the router, but that was no option for my laptop, which was working perfect, never had a bad connection or DNS problems....
I went back to the store with the router and there it worked fine, tested everything, but no problems, i came back home, hooked it up, and the problems where back...
Anybody got a clue, my only idea about this is that the 160n cant cope with the 90mbit,i got p. off and bought myself a wrt320n which works perfect, wired and wireless.

WRT160N does work with 90 Mbit...might be the settings are not proper on the router.
However its great that your were able to resolve the issue by WRT160N...

Snow Leopard and DNS problems

Hi
I read a lot about SL and DNS problems while accessing websites. It seems that you have to put your DNS server in system settings/network so that you don't get the error message "can't connect to the internet' in your browser window. My problem is that I change locations with my mac quite frequently (home, uni etc) so whenever I am a a new location I have to go to the network settings and manually put in the DNS server. Why do I have to do that with SL when it worked completely fine before the upgrade to SL?
Cheers
Martin

waschbaer22 wrote:
That is exactly what is happening. The problem with my DHCP server at home is that it doesn't submit the DNS address to the computer somehow. That's why I have to put it in manually each time I reconnect the MB at home after I had it at uni. Once back at uni I then have to go into the settings and delete my manually added home DNS server. Right after that the uni DNS server address appears automatically. So I guess that is just how SL now works and I have to live with it, right? However, why do we need a DNS server anyway to connect to the internet. I thought a DNS server just facilitates the connection to websites but I didn't know that it is crucial.
You should really try to figure out why your home router isn't providing you with a DNS server address and fix that. It could be a firmware issue, or it could be as simple as you have things set up so that one must manually be set up in the router, and one is not.
You are also misinformed as to DNS' importance.
DNS is the service that translates names - say "apple.com" - to the IP addresses - say "17.149.160.49" - that your machine needs to be able to connect to any site.
Without being able to resolve names to addresses, you have to manually specify numeric IP addresses for everything - effectively meaning you will be unable to use the Internet.

DNS PRoblem in SOLARIS 9.0

Similar Messages

Maybe you are looking for