DNS: reverse zone comes back after remove and some follow up issues

hello community,
after installation of OSL i had setup dns with a primary zone.
the automatically created reverse zone for my internal network is fine.
whenever i enter a new system the default for the ip address is 10.0.0.1 and the reverse zone is automatically setup for this ip address.
whenever i remove this reverse zone it come back automatically after saving the dns configuration.
with this come some follow up error.
server admin claim that there is no name server configured for this reverse zone.
when i configure it the configured name server entry vanished after clicking the save button.
when i try to configure settings i can not. i get the error message that the configuration can not be saved cause of the missing name server for the reverse zone i am not using ....
in the log file i can see that the file for reverse zone can not be found.
when i check the dns configuration in the shell i can see that the reverse zone file is not there.
someone has an idea
- whats the best way to fix this?
- why is the gui still showing the reverse zone i am not using?
- is the dns configuration also in the ldap db with wrong entries?
regards
christian

Clean out your zone definitions, and start over. Server Admin is unfortunately seemingly fussy around the authoritative server stuff and the order stuff gets entered, and it seems you can get into a sequence where it doesn't have what it needs. I had encountered couple of cases when I was in a similar state as you're in now, and I ended up clearing and deleting the primary zone and re-adding the zone and the hosts, being careful to add the authoritative server as the first step of adding a zone.

Similar Messages

My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!

The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

HT1338 Mac mini display connection will not come back after sleep, I have to shut down and restart the monitor.

Mac mini display connection will not come back after sleep, I have to shut down and restart the monitor.

Finder icon on dock, macintosh hd, library, launch agent - delete all files & restart sleep to test
also
Finder icon on dock, macintosh hd,
Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
delete file & restart sleep to test.

My brand new iphone 4gs from Sprints, is turning off whenever it wants and does not come back after 2 or 3 hours???,

My brand new iphone 4gs from Sprints, is turning off whenever it wants and does not come back after 2 or 3 hours???

Return it for a warranty replacement.

Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.

Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.
I work in full screen almost exclusively ... the toolbar and the URL are still displayed while in full screen.
Before this version (30.0), when I minimized Firefox to the taskbar so that I could go to the desktop or to Windows Explorer, when I finished what I was doing and re-selected Firefox it would go back to full screen. Now, it does not go back to full screen. I can still see the taskbar. I have to press [f11] two more times to get back to full screen.
I have tried with and without addons enabled. Same behavior. I have reset Firefox ... same behavior.
I'm using Firefox 30.0 and Windows 7 (64 bit).
Thanks.

Hi moose53,
Just tested it with a Logitech keyboard and you are right, what you are describing is not expected behavior. I see you do not have any add ons, however does this also reproduce in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]
If yes, try a new profile [[Use the Profile Manager to create and remove Firefox profiles]]

Very weird: uninstalled programs come back after reboot

I have turned off the system restore. I am sure the programs are uninstalled from the control panel, and the files in C:\Program Files\xxx are all gone. But these programs always comes back after a reboot, and resets all the file associations. I guess
it is a strategy the previous IT staff used to protect these programs. But the current IT staff have no clue what is happening here. It is so annoying.
Thank you very much for any input.

When you restart your PC, does it remove everything?
You might have two administrator in your account, try use log off and see what administrators do you have in your PC?

MBP does not come back after hybernation

Hello everyone,
I am enjoying my MBP except for one problem. It does not come back after it hybernates sometimes.
I hit a key, hear the superdrive do it's "thing" and then after much waiting (approximately over 10 minutes) no picture or video on the screen!
I can tell that it's still powered on because it's plugged in and when I hit the Caps Lock key it lights on and off.
The only way that I can get it out of this state is to hold down the power button, unplug the power cord, take the battery out, hold in the power button for 4 seconds, reinsert the battery and power back on.
I have to then cycle the power back off because the first time it does not come back but I just get the blank white boot screen and no 'apple'.
When I turn it back on the second time, it boots up.
Anyone else have a problem with this?
Thanks for listening!
Mark

Hello Gweedo!
Yeah I have the same issue and am up to date. Apparently this is a pretty huge problem with the Macbook Pro since the last Graphics update after updating to 10.5.2.
http://discussions.apple.com/thread.jspa?threadID=1394449
I have been perusing through that topic and hopefully they will come up with a fix for this.
The only work-a-round that I have found (but haven't tested extensively yet) is to disconnect to the wireless, turn off blue tooth, disconnect my external monitor and then go into sleep mode. Then it always comes back. But if I leave it connected to the wireless, bluetooth, and external monitor - it's a crap shoot as to weather or not it will come back up.
This is pretty frustrating because half of using a laptop is being able to hybernate and sleep properly.
I even have the 'smartsleep' installed.
Thanks for commenting everybody!
Mark

Skype for Android comes back after log out

I'll try this message again because apparently the first time I wrote it it just went into the ether of the internet. Recently Skype on my S4 has been logging back in and starting up after I've logged out even after I've forced closed the app. Previously when I closed the app by signing out it would completely get out of skype. If this behavior continues I will make sure that I make my company and friends leave skype and Lync (since they are becoming the same thing). This is on top of the terrible redesign of the desktop app that you pretended to listen to feedback on but after over 80 pages of feedback, decided not to listen to at all. Please don't present this as a "feature" or say that you can solve the problem by turning off "Sign in automatically" and "turning off notificiations." I want those things to remain as I don't want to have to enter my password each time I use the app and I would like the notifications when in use. And turning them on and off each time is the mark of a terrible interface. If this is some sort of feature, it needs to be made separate and made sure that Skype doesn't autorun when turning on your phone. I should mention that some of these have been notifications in the middle of the night, so it not only can affect ones sleep, it can cause additional communication problems with people thinking they are online when they truly are not. Definitely not something you want in a business or personal atmosphere. Skype for Android even with it's new notifications is still a terrible battery hog, with no option to change the now strange formatting and call button is in a place that results in a lot of unintentional calls because it's by where the touch keyboard is instead of at the top like it was previously. There is no reason that Skype should come back after being forced closed, but it should not have to get to that point. Please fix ASAP. This does explain some of the terrible battery life I've been experiencing lately.

THERE IS A WORKAROUND FOR THIS VERY ANNOYING AND BAD BEHAVIOUR I also have experienced this problem on S4mini, SII and other Android devices running all sorts of versions of AOSP. You are all correct that this should not happen (signout should == signout) but if you don't want to reboot you Android all the time then do the following (instructions for A 4.4.2 Kitkat on Samsung running TouchWiz but similar to other devices)0. Signout of SKYPE1. SETTINGS2. MORE ...3. APPLICATION MANAGER4. RUNNINGYou should find a SKYPE process; select it and STOP (ignoring any warnings). Voila, no more zombie SKYPE Worring things include being online and woken in the middle of the night - but more so is that the running process is VIDEOMONITOR - now why would MSFT want to leave that running???

E550 will not come back after hibernation/sleeping mode

Thinkpad E550 will not come back after hibernation/sleeping mode. please help. I just bought this garbage laptop about 1 month ago. the big issue is the laptop will not come back after sleeping. I often run some calculation for some hours, the laptop always goes sleeping and wont come back. I had to power off the laptop and re-started it again. All of my calculation results were gone. Lenovo support is very bad, I already submitted a service ticket 2 weeks ago, but nobody contacted me. Lenovo laptops are garbage. I will not buy it anymore. Anyone can help? thanks a lot!

HI Clare,
In the Toshiba Power Management utility you should click on the 'advanced' tab and about half way down the resultant window you should see an option for the action to be taken when you close the lid of your SA30.
Make sure that this is set to 'hibernate'. Then go to the power save modes and click on the 'details' tab and then the 'Power Save Mode' tab and make sure that the 'Hibernate' option is set to 'never'.
With these settings your notebook should go into 'hibernate' when you close the lid but not at any other time.
Note that you can set the notebook to hibernate when running on battery when the bttery capacity reaches a pre-set value of your own choosing.
regards,

There are several login keychain items I'd like to get rid of. I've deleted them but they come back after several hours. How can I get rid of them for good

There are several login keychain items I'd like to get rid of. I've deleted them but they come back after several hours. How can I get rid of them for good.

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences ▹ First Aid
If the box marked
          Keep login keychain unlocked
is not checked, check it.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

HT1925 Message after removing and trying to reinstall itunes 'The system administrator has set policies preventing this installation'. Can anybody help?

After removing and reinstlling iTunes .....message reads 'the system administrator has set policies preventing this installation'

Try the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

I have just come back from holiday and started my mac up and I have a white spot next to my Finder, Safari and Mail? why?

I have just come back from holiday and started my mac up and I have a white spot next to my Finder, Safari and Mail? why?

Are you talking about the indicator for open applications?
If you're on Lion, it just reopened apps that where open when you shut it down.
Regards,
Captfred

Macbook Pro won't start up after removing and putting back battery

One week ago I spilled two drops (literally) of water on the drag pad of my MacBook Pro (model A1278). Some of this water went down the top edge of the drag pad. Since this happened, the cursor as either not been been responding at all to my drag pad, or it has been behaving very eratically, as well as this, over the last couple of months since buying this MacBook, there has been an abnormal amount of dust in the air in the house due to some building work going on here. This being so, I decided to follow a video tutorial in you tube on how to remove and clean the drag pad. This involved getting access to the laptop by unscrewing the back, unscrewing and disconnecting the battery, then unscrewing and disconnecting the drag pad, so this it could be handled and cleaned. I followed the video to the letter, taking great care. I cleaned the drag pad as instructed, and replaced it. I did the same thing with the battery. All screws and the two simple 'plug in' connections for both the drag pad and battery have been replaced smoothly and exactly as I found them. but after putting the back panel on the MacBook, it will not turn on. It will not power up, either by the battery alone, or by using the mains power lead. There is a green light showing on the power lead input, but it is nowhere near as bright as it usually is. So I have gone from having a poorly functioning drag pad, to now having a MacBook Pro which won't even turn on! I have no idea what has happened. Please can anyone help? Thanks.

So are you saying that it will not boot from the OSX installation disk?
It might be worth trying an SMC reset as described here:
http://support.apple.com/kb/HT1411?locale=en_GB

HT1386 i update my phone to is06.01 and my music will not come back after i svnc

i have update my iphone 4s to is06.0.1 and after i sync my music will not come back has any one had this problem

Is the music in the iTunes library on your computer?

When browsing and scrolling the webpage goes blank but comes back after a few seconds. OS is XP.

Very annoying feature which has only happened recently. It also happens in IE 8.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

DNS: reverse zone comes back after remove and some follow up issues

Similar Messages

Maybe you are looking for