DNS server refurse to start after installing MFC-7820N printer driver

Last night I installed a new printer driver brxubprt11c.dmg for Mac OSX 10.4 V.1.1.0
This morning I could not get the DNS to run, which had been running for months. I would start but immediately stop again. I try to save the setting again with a small change but alas. The apple tech support had me check my hard drive and repair permission, but alas. They recommended that i read "getting started supplemental manual" and did a new DNS setup.
This night I decided to copy all the setting (I took screen captures and dragged the DNS Config.plist to my desktop. Just in case, I changed the log setting to "debug"... Maybe it would tell me something... I started it up...but it kept running...
Does this make any sense to anyone? Does anyone has a guess how saving the log setting might have got the thing back to work? Does it save only the change in the log file or the whole DNS Config.plist?

This was due to a bad hard drive

Similar Messages

  • Printing problems after installing the Epson Printer Driver 2.16

    Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

    Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

  • HTTP Server Doesn't Start after install

    I just completed an install of the 10.1.3.1 Oracle App Server. It indicated that the install was successful. I can see in the log the BPEL Manager deploying in the default domain, but I do not see any reference to the HTTP server. Also, when I do a *./opmnctl startall* there is no HTTP_Server~1.log created.
    Is there a step I need to complete to enable the Apache server to start? I must be missing something - the Apache folder is there in the install folder.
    The *./opmnctl status* reports:
    Processes in Instance: AS02.ssg-st-bpel-build0-dev.vzbi.com
    ---------------------------------+--------------------+---------+---------
    ias-component                    | process-type       |     pid | status
    ---------------------------------+--------------------+---------+---------
    OC4JGroup:default_group          | OC4J:home          |   18970 | Alive
    ASG                              | ASG                |     N/A | DownI found the following in the installActions log:
    Install type for "Oracle HTTP Server 10.1.3.0.0 " is "Typical".
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.bc4j 10.1.2.0.0.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.bc4j.oem 10.1.2.0.0.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.soap.srv 2.2.0.0.2a.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.apache.ejb 9.0.1.0.1.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.apache.ojsp 10.1.2.0.0.
         Conflict while setting install type of "Oracle Process Management Notification 10.1.3.1.0 "  to "Typical (Typical)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.dcm 10.1.2.0.0.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.sysman.emd 10.0.2.0.0.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.java.j2ee.iascfg 10.1.2.0.0.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.logloader 10.1.2.0.0.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.webdb.monitor 10.1.2.0.0.
    What am I missing?  Is there a package I need to install before installing the App Server?
    Edited by: BCurtis on Sep 24, 2010 3:22 PM
    Edited by: BCurtis on Sep 24, 2010 3:25 PM

    I now know I'm missing the <ias-component id="HTTP_Server"> in the opmn.xml file. The following is from an older install of a few years ago.
             <ias-component id="HTTP_Server">
                <process-type id="HTTP_Server" module-id="OHS">
                   <module-data>
                      <category id="start-parameters">
                         <data id="start-mode" value="ssl-enabled"/>
                      </category>
                   </module-data>
                   <process-set id="HTTP_Server" numprocs="1"/>
                </process-type>
             </ias-component>This explains why the startall doesn't start the HTTP Server, but why would the install not include the HTTP Server in the configuration?

  • Wiki Server Will Not Start After Installing Safari 4.0.5

    *PLEASE HELP*
    We have a production server running MacOS X Server 10.5.8 with all software updates installed.
    Wiki server refuses to launch, though launchd tries to open it every 10 seconds.
    When visiting www.domain.com/groups/community we see an error 503 in the web browser
    *Steps Taken to Correct*
    % sudo chown -R 94:94 /Library/Collaboration
    % serveradmin stop teams && serveradmin start teams
    Restarted the machine itself
    % cd /Library/Collaboration && find . -name '*.plist' -exec xmlwf {} \;
    *Those steps proving ineffective, we're now just trying to start over. We've removed all user generated content from the wiki directories and we just want the wiki server to launch successfully.*
    Removed "groups" and "users" directories from /Library/Collaboration
    Replaced /etc/wikid/wikid.conf with /etc/wikid/wikid.conf.default
    Deleted /Library/Application Support/Apple/WikiServer/directoryIndex.db
    Deleted /Library/Application Support/Apple/WikiServer/User Preferences/* (all user preferences)
    WHAT AM I DO WRONG? HOW CAN I GET A FRESH WIKI INSTALL WITHOUT REINSTALLING THE OS? This is a production server. We'll have to go without wikis rather than introduce downtime. Thank you.
    */Library/Logs/wikid/error.log is repeating the following every 10 second interval:*
    2010-03-21 13:50:27-0700 [-] Log opened.
    2010-03-21 13:50:27-0700 [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
    2010-03-21 13:50:27-0700 [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
    2010-03-21 13:50:27-0700 [-] twisted.web.server.Site starting on 8086
    2010-03-21 13:50:27-0700 [-] Starting factory <twisted.web.server.Site instance at 0x2eb3918>
    2010-03-21 13:50:27-0700 [-] twisted.web2.channel.http.HTTPFactory starting on 8087
    2010-03-21 13:50:27-0700 [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x2eb3cd8>
    2010-03-21 13:50:27-0700 [-] set uid/gid 94/94
    2010-03-21 13:50:27-0700 [-] "Failed trying to build an index for a non-directory path: '/usr/share/wikid/help/fr.lproj'"
    2010-03-21 13:50:27-0700 [-] Traceback (most recent call last):
    2010-03-21 13:50:27-0700 [-] File "/usr/share/caldavd/bin/twistd", line 21, in <module>
    2010-03-21 13:50:27-0700 [-] run()
    2010-03-21 13:50:27-0700 [-] File "/usr/share/caldavd/lib/python/twisted/scripts/twistd.py", line 27, in run
    2010-03-21 13:50:27-0700 [-] app.run(runApp, ServerOptions)
    2010-03-21 13:50:27-0700 [-] File "/usr/share/caldavd/lib/python/twisted/application/app.py", line 379, in run
    2010-03-21 13:50:27-0700 [-] runApp(config)
    2010-03-21 13:50:27-0700 [-] File "/usr/share/caldavd/lib/python/twisted/scripts/twistd.py", line 23, in runApp
    2010-03-21 13:50:27-0700 [-] _SomeApplicationRunner(config).run()
    2010-03-21 13:50:27-0700 [-] File "/usr/share/caldavd/lib/python/twisted/application/app.py", line 158, in run
    2010-03-21 13:50:27-0700 [-] self.postApplication()
    2010-03-21 13:50:27-0700 [-] File "/usr/share/caldavd/lib/python/twisted/scripts/twistdunix.py", line 213, in postApplication
    2010-03-21 13:50:27-0700 [-] startApplication(self.config, self.application)
    2010-03-21 13:50:27-0700 [-] File "/usr/share/caldavd/lib/python/twisted/scripts/twistdunix.py", line 183, in startApplication
    2010-03-21 13:50:27-0700 [-] app.startApplication(application, not config['no_save'])
    2010-03-21 13:50:27-0700 [-] File "/usr/share/caldavd/lib/python/twisted/application/app.py", line 400, in startApplication
    2010-03-21 13:50:27-0700 [-] service.IService(application).startService()
    2010-03-21 13:50:27-0700 [-] File "/usr/share/caldavd/lib/python/twisted/application/service.py", line 233, in startService
    2010-03-21 13:50:27-0700 [-] service.startService()
    2010-03-21 13:50:27-0700 [-] File "/usr/share/wikid/lib/python/apple_utilities/service.py", line 60, in startService
    2010-03-21 13:50:27-0700 [-] RepositoryManager.ensureRepository()
    2010-03-21 13:50:27-0700 [-] File "/usr/share/wikid/lib/python/apple_utilities/RepositoryManager.py", line 63, in ensureRepository
    2010-03-21 13:50:27-0700 [-] SearchManager.buildSearchIndex(aPath, forceRebuild = False)
    2010-03-21 13:50:27-0700 [-] File "/usr/share/wikid/lib/python/apple_utilities/SearchManager.py", line 406, in buildSearchIndex
    2010-03-21 13:50:27-0700 [-] GroupSqliteIndex.buildSearchIndex(whichPath, forceRebuild)
    2010-03-21 13:50:27-0700 [-] File "/usr/share/wikid/lib/python/apple_utilities/GroupSqliteIndex.py", line 622, in buildSearchIndex
    2010-03-21 13:50:27-0700 [-] metaData = GroupSettings.GroupSettings(pathName)
    2010-03-21 13:50:27-0700 [-] File "/usr/share/wikid/lib/python/apple_wlt/GroupSettings.py", line 37, in GroupSettings
    2010-03-21 13:50:27-0700 [-] settings = GroupSettingsObject(path, saveData, refreshCache)
    2010-03-21 13:50:27-0700 [-] File "/usr/share/wikid/lib/python/apple_wlt/GroupSettings.py", line 51, in _init_
    2010-03-21 13:50:27-0700 [-] self.data = plistlib.readPlist(self.prefsPath)
    2010-03-21 13:50:27-0700 [-] File "/System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/plat-ma c/plistlib.py", line 77, in readPlist
    2010-03-21 13:50:27-0700 [-] rootObject = p.parse(pathOrFile)
    2010-03-21 13:50:27-0700 [-] File "/System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/plat-ma c/plistlib.py", line 402, in parse
    2010-03-21 13:50:27-0700 [-] parser.ParseFile(fileobj)
    2010-03-21 13:50:27-0700 [-] xml.parsers.expat.ExpatError: no element found: line 1, column 0

    Hi,
    might not help you, but on MacOSX 10.6.3 Server, we have exactly the same problem - on solution (beside switching the wiki).
    Peter

  • Lombard couldn't start after installing a new hard drive

    After I installed the new internal hard drive for my powerbook G3 lombard, I tried to boost it by using my tiger disk and hold "C", but the Finder prompt shows "?" and i couldn't even start the computer. I aslo tried the same thing by using my old OS 8.6, it was still the same. This problem is happened only after i installed the new 40GB hard drive in my powerbook.
    When finder prompted "?", I just let it going, the computer shut down itself after a while.
    Could you please tell me what the problem is and how to fix it? Thanks!
    Eric
    Powerbook G3 Lombard   Mac OS X (10.4.3)  

    Eric,
    If you have not done so, reset the PRAM from a cold start; please allow 2-3 startup chimes before releasing keys.
    http://docs.info.apple.com/article.html?artnum=2238
    With all peripherals disconnected, boot to your MacOS 8.6 CD. Use the Drive Setup in the Utilities folder on the CD to initialize the HD using HFS Extended Format; this is always a good procedure to follow on a new HD. Also be sure to "Update HD Driver" with Drive Setup so a driver will be installed.
    You need 9.x to run XPostFacto; if you don't have 9.x, you could install an earlier version of 10.x up to 10.3 which is natively supported by the Lombard, then install XpostFacto. This will allow you to boot the Tiger DVD and install 10.4.
    If you have a USB HD with a bootable 9.x installed, boot to your MacOS 8.6 CD, then connect the USB HD. If you have 9.x on the USB HD, you can drag-copy it to the internal HD, then restart to the internal HD. Now add XPostFacto so you can install Tiger.
    You cannot boot to a FireWire HD through a FW PC card. However, once you have an OS installed on the internal HD, you can use XPostFacto as a "helper" to boot a FW HD through a FW PC card if you desire. I am not sure if you also need 10.x on the internal HD for this configuration to work.
    You also cannot boot to a USB HD:
    http://docs.info.apple.com/article.html?artnum=58354
    Good luck and I hope I have covered all of your options.

  • Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1

    I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
    Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
    Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
    Error: 17750, Severity: 16, State: 0.
    Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).

    Hi JFriedley,
    According to your error message, there might three reasons for this issue.
    xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
     edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
    Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
    files.
    There is a similar issue about error 17750, you can review the following article.
    http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
    Regards,
    Sofiya Li
    If you have any feedback on our support, please click here.
    Sofiya Li
    TechNet Community Support

  • DBConsole Service doesn't start after Install OAS F&R-Services Win 10g

    Windows DBConsole Service doesn't start after Install OAS F&R-Services
    Hello,
    we have installed:
    WINDOWS Server 2003 with SP 2
    Oracle 10.2.0.1
    OAS F&R Services 10.1.2.0.2
    after Install DBR2 EM / DBConsole did work
    after Install OAS F&R-Service
    the windows-service for DBConsole
    doesn't start, return with an Error Code 2
    see below
    the file named emdbconsole.nohup from output log
    is not to find
    the ias_console does work fine
    OAS F_R-Services do work too
    whats may be wrong ?
    regards
    Norbert
    OracleDBConsoleorclsrvc.log :
    EMDROOT=D:\oracle\product\10.2.0\db_1
    ORACLE_HOME=D:\oracle\product\10.2.0\db_1
    EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    12/14/09 13:13:08 Start pending...
    12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    12/14/09 13:13:09 Tracking process launch...
    12/14/09 13:13:39 dbconsole exited with retCode 2.
    12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
    Edited by: astramare on Dec 15, 2009 8:43 AM

    Hi,
    1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
    cd %ORACLE_HOME%\bin
    emctl stop dbconsole
    2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
    Change line from:
    tracelevel.main=WARN
    To
    tracelevel.main=DEBUG
    Decomment this line, so that the line becomes :
    EMAGENT_PERL_TRACE_LEVEL=DEBUG
    3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
    Change line from:
    log4j.rootCategory=WARN, emlogAppender, emtrcAppender
    To
    log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
    4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
    5. Start the dbconsole and upload the output of each command
    - start the dbconsole: "emctl start dbconsole"
    - issue "emctl clearstate"
    - status the dbconsole: "emctl status dbconsole"
    - check the status of the agent until it comes up: "emctl status agent"
    - force an upload: emctl upload
    6. Check If you are able to view the dbconsole Page & login
    check below logs may be you can see the close error messages to solve the issue.
    <ORACLE_HOME>/<hostname_sid>/sysman/log directory
    <ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
    Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
    Thanks.

  • IPhoto cannot start after installing Lion

    iPhoto v 9.1.5 will not start after installing Lion
    The app is installed on the main disk in the default location (vs. problems others are having after Lion install)
    I can't find any updates for Lion or iphoto to fix this problem
    Error log posted below ...
    Process:         iPhoto [2680]
    Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier:      com.apple.iPhoto
    Version:         9.1.5 (9.1.5)
    Build Info:      iPhotoProject-6150000~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [149]
    Date/Time:       2011-07-24 08:04:31.660 -0500
    OS Version:      Mac OS X 10.7 (11A511)
    Report Version:  9
    Interval Since Last Report:          39908 sec
    Crashes Since Last Report:           9
    Per-App Crashes Since Last Report:   3
    Anonymous UUID:                      18AE49DC-DF10-4143-94CD-27B7C9077A57
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: /Library/Frameworks/iLifeFaceRecognition.framework/Versions/A/iLifeFaceRecognit ion
      Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
      Reason: image not found
    Binary Images:
        0x1000 -   0xeffff7  com.apple.iPhoto (9.1.5 - 9.1.5) <65AA38DF-C3AF-A06F-62AA-254A854FA060> /Applications/iPhoto.app/Contents/MacOS/iPhoto
    0x1056000 -  0x1136fe7  org.python.python (2.6.6 - 2.6.6) <2683D847-5FC7-3F47-816E-D1CB71594F4F> /System/Library/Frameworks/Python.framework/Versions/2.6/Python
    0x1181000 -  0x11aafff  com.apple.iPhoto.Tessera (1.1 - 48.10) <39FACFA3-C1A1-CC57-9874-CF0E2EB0684C> /Applications/iPhoto.app/Contents/Frameworks/Tessera.framework/Versions/A/Tesse ra
    0x11c3000 -  0x11eaff3  com.apple.iPhoto.Tellus (1.3 - 48.10) <BE3ADEF1-C058-3660-60C5-5AC69CD5414D> /Applications/iPhoto.app/Contents/Frameworks/Tellus.framework/Versions/A/Tellus
    0x1209000 -  0x1213ff7  com.apple.iphoto.AccountConfigurationPlugin (1.1 - 1) <44FEAB1C-0E0B-7E80-82A5-5CF6287CF5DF> /Applications/iPhoto.app/Contents/Frameworks/AccountConfigurationPlugin.framewo rk/Versions/A/AccountConfigurationPlugin
    0x8fee7000 - 0x8ff199c7  dyld (195.5 - ???) <134323A7-49DC-3A9D-ACFD-32FAD0FD6BA2> /usr/lib/dyld
    Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.52f9
    Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.55.4-P2P
    Bluetooth: Version 2.5.0f17, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD5000AAKS-40V2B0, 500.11 GB
    Serial ATA Device: HL-DT-ST DVDRW  GA11N
    USB Device: EyeTV Hybrid, 0x0fd9, 0x0027, 0x24300000 / 3
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
    USB Device: iPod, apple_vendor_id, 0x1299, 0x26200000 / 3
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 4

    There was a fix suggested over on this thread. I didn't want to re-post the answer since it is not mine - rather it was my thread with the same question.
    https://discussions.apple.com/message/15735275

  • Ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

    ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

    Jennifer...
    Follow the instructions here >  iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Mac Mini won't start after installing OS X 10.6.3

    My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?

    If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
    I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
    Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
    So, following the above guidelines, reinstall 10.6.3.

  • TS1702 My problem started after installing smartsync which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crash after using them for awhile. I have remove the smartsync app but my phone still behaves the sa

    My problem started after installing "smartsync app" which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crashed after using them for awhile.While using my apps, they will black out after a little while and the phone returns to the starting page. I have removed the smartsync app but my phone still behaves the same way. At the same time the dates that accompany my messages changed to another language. How can these be rectified?

    Eek.  Sounds like something in the app caused some serious software issues.  You can try a hard reset, but I'd imagine you're probably going to have to do an iTunes restore to get it running right again.

  • When I export audio to movie the result is just very much noice. The problem started after installing Lion

    When I export audio to movie the result is just very much noice. The problem started after installing Lion
    I'm using latest version of Logic 9 in 32 bit

    Please - gotta bump this because I'm really desperate to get this working.
    Any help or ideas .....?

  • The Connection Server does not start after an upgrade to BO4.1 SP3

    Hello guys,
    The Connection Server does not start after an upgrade to BO4.1 SP3
    We are in process to upgrade our Business Objects environments to BO4.1 SP3
    The first 2 environments , the upgrade went fine. But the third environment de connection server won’t start.
    When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
    Our OS is AIX
    Uncaught Exception in SilentScope: [CS] Ser
    verInitialization::InitManager::Initialize: 0.007^^
    The CS initialization failed within the CS server. Aborting
    trc file: "connectionserver_BIO.ConnectionServer_ncs.trc", trc level: 1, release: "720"
    Gerd

    Hi Amine
    The File seems ok
    File from the failing connection server
    -rw-rw---- 1 bioadm bosys 43993 Apr 11 11:29 boconfig.cfg
    File from our test system
    -rw-rw---- 1 bitadm bosys 43892 Apr 14 10:56 boconfig.cfg
    I created a new connectieserver(by the copy function), but the new server won't start.
    Regards
    Gerd
    Log
    |89d4a6e0-2a89-7a05-3020-a51d517ab872|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] Unhandled exception raised during CS initialization.
    init_srv.cpp:95:-: TraceLog message 3
    |4dcf04b1-1e1d-df13-48ad-a67f06e29864|2014 04 14 11:54:30:113|+0200|Error| |<<|E|X|connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||Uncaught Exception in SilentScope: [CS] ServerInitialization::InitManager::Initialize: 0.003
    |77ad78f4-37f7-3013-3b50-85cce9fbe7b8|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] The CS initialization failed within the CS server. Aborting.

  • HT1199 my computer displays grey screen and apple logo for 10 minutes or more during start up and shut down. sometimes it refuses to shut down . this issues started after installing OS lion. what do i do?

    my computer displays grey screen and apple logo for 10 minutes or more during start up and shut down. sometimes it refuses to shut down . this issues started after installing OS lion. what do i do?

    I don't think it's exactly an incomplete installation brody, but most likely in-correct permissions somewhere along the line that either happened, or became magnified during the upgrade. Also, it could be corruption as well.
    First thing to do, is boot up holding down Shift key to do a safe-boot so we an clean up any corrupted OS caches, after that do another reboot, but go to the Lion recovery, and scan the HD for errors, repair any if you find them, and then try to do a Repair Permissions job.
    That should fix the issue, if not, we can start doing a PRAM reset  and SMC for good measure.

  • Safari won't start, after installing X Lion

    Safari won't start, after installing X Lion

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Step 1
    Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Maybe you are looking for

  • Java Plug-in / JSObject support with IE and Firefox

    Hi there, Basicaly, the idea behind is to write objects in Java to replace or extend functionnalities of a web page (like XMLHttpRequest object). Those objects should support event handler writen in Javascript. My first idea was to create JavaBeans a

  • Is it possible to change application state from a component?

    I was wondering if it is possible to change application state from within a custom component and if so, what would the syntax be if I had an application named "zzz" and I wanted to change the app state from "state1" to "state2" from my component? Tha

  • 'send Timezone' setting in remote portlet web service

    Our portlets don't render if we check the box 'send timezone' in the advanced settings section of a portlet's web service. It throws the following error in pt spy:<br><br><br> *** PTBase.ThrowException *** (-2147024809) Error getting portlet content:

  • Lose internet when plugging into switch

    I am perplexed why I can create a wireless network with my airport extreme and have great internet connectivity through my cable company, but when I plug the airport into a switch to distribute the internet through out my office the internet immediat

  • Could not access apple id

    Dear Team, I have my apple id but i cann't access this id because of error is showing while login the internet connection appears to be offine. please help me out for this query. Sumit Agarwal