Dns setting require for mail server 2013

Hello Support,
I have install exchange server 2013 and working fine but right now i have some change in DNS server record and my mail services stop. what record add to start my mail services ( sent and received). till now exchange server mail box give the error mail not
connected with server. Please revered ASAP.

couple of things to notice. if you saying your exchange services stopped... this wont happen because of DNS or are you saying you exchange is not working/mail flow.
now i would suggest to quickly check the mail services. run a test for inbound and outbound at exrca.com there you will have the proper answer that what you have missed.
and at last.. for DNS.. you need MX and A record for your email server for basic functioning .. and for autodiscover couple of more. lets verify the MX and A record first and then verify the send and receive connector. to verify MX do a Nslookup as below
>cmd
>nsloookup {This should resolve to your local DNS if you running this from exchange server, which is recommended and should not time out}
>set type=mx
> your-domain.com {This should result "A" record / FQDN of your mail server}
> set type=A {To verify the above FQDN should point to right IP}
> mail.your-domain.com [assuming that in MX output you got mail-your-domain.com]
> 1.1.1.1 [IP of your email server]
if you are able to verify above then your chances are you dont have issue with DNS.
Make sure from oursite you are able to telnet t tour exchange server on port 25 and from inside you are able to resolve names from your exchange server and also have internet access.if you able to verify till this point then its the turn now to verify send
and receive connector. one easy way is exrca.com and then share the results.
to verify if your exchange is configured properly please follow this link.
http://www.techieshelp.com/exchange-2013-step-by-step-configuration/
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin

Similar Messages

Which sharepoint service applications & services are required for Project server 2013 to work fine.

HI,
Can any one help me,
I am planning to install project server 2013, what are the service applications and Services ( Manage services on server in central admin ) in sharepoint are required for project server 2013 to work fine, so that i will run only service
application and services to increase server performance..i don't want to configure all service applications when i am configuring.
Thanks in Advance..
vijay kommireddi

Hi Vijay,
If you are installing Project Server on SharePoint farm, You need to start the service Project Application Service which would be available after you install project Server 2013.
For Project Server Reporting you need to start Excel service and Secure Store service.
http://technet.microsoft.com/en-us/library/ee662106(v=office.15).aspx
Thanks,
Phani

How to set up a mail server with a private DNS and relay over a public mail

How to set up the mail server that we can send and pick up emails inside and outside?
Our private network has the DNS name dnsname1.private.
We have our privat DNS Server and he can forward requests to outside over our router.
Our public emails are hosted by an internet provider. This dns name is dnsname2.com and dnsname2.org.
How we have to set up our mail server that we can pick up our emails from our public dnsname2.com?
And when we write an email how we have to set up it that the dnsname is dansname2.com and not dnsname1.private?

If you want to move your mailservice to your own (internal) server, start by making sure you can recieve traffic on port TCP 25 (SMTP). Some ISPs blocks this port, especially on "non business" connections.
Can you send mail from your LAN directly to where your mail is hosted using port 25 TCP or do you have to relay via your ISP?
You have a static public IP?

Send email is not working in share point desinger 2013 for project server 2013 workflow

Hi,
How to configure email for project server 2013. i have created workflow where i am sending email. It is not sending it.
i have set outgoing mail setting. Tasks are created in my workflow but mail is not sending.
Thank you for helping us.
Thank You
Vinay

Hi,
How to configure email for project server 2013. i have created workflow where i am sending email. It is not sending it.
i have set outgoing mail setting. Tasks are created in my workflow but mail is not sending.
Thank you for helping us.
Thank You
Vinay

Setting up a mail server and the client

Hi! I'm setting up a mail server on a virtual server (VMware Fusion 2.0.5) and I've a lot of problems. how to set up a mail account with the workgroup manager?? I create accounts but it doesn't appears on Server Admin in the mail service. And how to configure the email for an account ?
the short name is "it" and in the mail tab the mail server is "my.resolveme.com"
The mail address for this example is: [email protected]
please help me!!!

Hi,
Do you speak french ?
This is my records for the dns :
A mail.sebas.resolveme.com 153.109.XX.XX
MX sebas.resolveme.com mail.sebas.resolveme.com
What is the name for the server : mail or other ?
Second problem : I tried to send a mail by telnet. It's ok, the mail is queud. But if I go with outlook to see my mail box I can't see nothing
We are ok for the mail of the client : it's shortname @ the name in WGM (like sebas.resolveme.com)
Thanks for the answer !

How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

You need to get the settings for your email from your email provider and enter them in Internet Accounts (System Preferences). Many of the common systems are already available, all you need is a password and an email address to set them up.

Setting up a mail server on a 2010 MacMini Server

Hi,
I am having great difficulty in setting up my Mail server on my 2010 MM server.   Setup is as follows:
1. Domain name hosted by dyndns.org with mail forwarding setup to forward incoming mail to my mail address <[email protected]>
2. Outgoing mail is being sent from the server via my local ISP using their relay server
3. Mail Server settings in Server app shown as "Provide mail for: mail.domainname.org"
4. Authentication set to: "Relay outgoing mail through ISP"
5. dyndns.com confirm that the domain host side is set up correctly.
6. Local ISP confirms that local relay service is set up correctly.
Problem is Mail account cannot be activated in Apple Mail.    email setup details in my server Mail app are as follows:
     Account Type:    POP
     Email address:   [email protected]
     Full Name:         my name
     Incoming Mail Server:   mail.domainname.org
      User Name:      admin
      Password:        password on the dynsdyn.com srever
      Outgoing Mail Server (SMTP):   Local ISP providers mail relay service
Has anyone any idea where this setup is wrong?   Also, I am unable to find a server manual for OSX 10.8.4 server. Does anyone know where I can get this?
Any help you can give is most appreciated.
Thank in advance
Roger

Hi Linc,
For the email address on the server, I create the account in my Apple mail in the normal way. I fill in the details shown on the accounts setup panel as shown in my original post above. I then click on the "Enable this account" button but it does not connect to anywhere.
For the Server setup, this is also described in points 3. and 4. above.
The result is that the server seems to be setup properly but this may not be the case, which is why I asked my questions.
Sorry I cannot be more explicit but if you are willing to ask deeper questions that might point to the problem, I would be more that delighted to supply the answers if I can.

[SOLVED] setting up a Mail server - advice and or warnings

I am about to set up a mail server for family (about 10 accounts) and could do with some advice on what to use, how to set it up and how to protect it from becoming a zombie spam server.
I have courier functional now.
Last edited by Cheifchimp (2010-06-20 06:27:20)

I use postfix. Plenty of howto's and documentation at http://www.postfix.org/documentation.html.
You can check you are not an open relay at http://www.mxtoolbox.com/diagnostic.aspx

HT1277 Automatic set up for mail isnt working, on the "welcome to mail" pop up its not recognising my password and gives me no option to reset, which password should I be entering? Im assuming its the one for my Mac ? also tried my Yahoo one but no joy...

Automatic set up for mail isnt working, on the "welcome to mail" pop up its not recognising my password and gives me no option to reset, which password should I be entering? Im assuming its the one for my Mac ? also tried my Yahoo one but no joy.....

start mail then:
Preferences> Accounts> click the [+] icon and fill in the blanks.
select POP account
Here are the basic server settings for Yahoo! Mail:
Incoming Mail (POP3) Server: pop.mail.yahoo.com (Use SSL, port: 995)
Outgoing Mail (SMTP) Server: smtp.mail.yahoo.com (Use SSL, port: 465, use authentication)
Account Name/Login Name: Your Yahoo! Mail ID (your email address without the "@yahoo.com")
Email Address: Your Yahoo! Mail address (e.g., [email protected])
Password: Your Yahoo! Mail password

Package files of Installation SBA for Lync Server 2013

Hi everyone,
It´s my first post and would like know where can found the files of installation for Lync Server 2013 SBA (Survivable Branch Appliance).
My appliance is a module SRE-910 with Router 2911
I contacted the microsoft and they said that the files are provided from cisco.
The Guide that I´m following is this:
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=28555
Question posted in forum Microsoft:
http://social.technet.microsoft.com/Forums/en-US/lyncvoice/thread/81a0d1e2-39f2-45ad-9908-f4162e9d302f
Quote of Site Microsoft about software and Hardware requeriments to SBA:
"Required hardware and software is built into the Survivable Branch Appliance"
Someone can give a light ?
Thanks in advance!

http://blogs.technet.com/b/xdot509/archive/2012/10/24/installing-a-two-tier-pki-hierarchy-in-windows-server-2012-part-ii-installing-a-root-certification-authority-with-the-gui.aspx

Basic Setting required for running simple JMS class

please tell me all setting required for running JMS class.
I have installed IBM MQSeries.
Especially about how to lookup for Topic and TopicConnectionFactory and where should i specify.
it is very urgent please help me fast. Also send any files for doing setting to me at [email protected]

Context ctx = null;
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY," "); //put yor init. context
ht.put(Context.PROVIDER_URL, " "); //put your server url
ctx = new InitialContext(ht);
TopicConnectionFactory topicConnectionFactory = (TopicConnectionFactory) ctx.lookup(" "); // your connection factory
TopicConnection tcon = topicConnectionFactory.createTopicConnection();
TopicSession tsession = tcon.createTopicSession(false,Session.AUTO_ACKNOWLEDGE);
Topic topic = (Topic) ctx.lookup(" "); // This is your topic
TopicSender tsender = tsession.createSender(topic);
TextMessage message = tsession.createTextMessage();
message.setText("Topic Message");

If the Microsoft Forefront Protection 2010 for Exchange Server can use for exchange server 2013?

if the Microsoft Forefront Protection 2010 for Exchange Server can use for exchange server 2013?

thanks for your reply!
what's protection software can use for exchange server 2013?
Hi,
Most (if not all) of the bigger vendors has a product that supports Exchange 2013, so look them up.
Exchange 2013 has some Anti-Spam and Anti-Malware Protection functionality that you can read about here:
http://technet.microsoft.com/en-us/library/jj150481(v=exchg.150).aspx
Martina Miskovic

What is setting required for Price Contol do the optional entery in master.

Hi SAP EXPERT,
What is setting required for Price Contol do the optional entery in Material master ?
Regards
Mahendra
Edited by: MAHENDRA NAVALE on Aug 27, 2011 2:23 PM

HI
In general in the material master record you can, hide display or optional for a field, but there are certain feilds should be mandatory for material creation,like base unit of measure,material description,and price contro,l valuation price,valuation class,without this you cannot create a purchase order.
If you dont want to the price control means go for mateial type non valuated material NLAG. because the price control is mainly linked with the material valuation. based on the the price control the price difference will post either sock account or price difference account.
Goto>MM>LOGISTICS GENERAL>MATERIAL MASTER>FEILD SELECTION >ASSIGN FEILD SELECTION TO FEILD SELECTIN GROUPS(OMSR) >CHECK YOUR FEILD REFERENCE FOR PRICE CONTROL (MBEW-VPRSV) FEILD REFERNCE GROUP IS 32* > AND GOTO MAINTAIN FEILD REFERENCE FOR DATA SCREENS (OMS9) >ENTER YOUR FEILD SELECTIN GROUP 32 (PRICE CONTROL )AND CHOOSE MM01 MAKE IT FROM REQUIRED TO OPTIONAL.
Thanks
Edited by: Nijamudeen**MM on Aug 29, 2011 10:19 AM

(Deployment) Minimum Software required for BUILD server and IIS WebServer

We have a simple .Net SDK application written using VB-2005 and the Crystal Reports XI (R2) DEVELOPER package.
The RPT files are posted on our BOE-XI (R2) server, and are called using the View-On-Demand method from the Page Server (similar to the SDK sample application). At some point in the future, our .Net applications may invoke some of the other SDK content types.
In our environment, the .NET web-applications are checked-in to Clear Case, and then sent to a stand-alone BUILD server to be compiled. The compiled .NET web-applications are then posted to a stand-alone IIS WebServer (not the IIS server that hosts BOE InfoView/CMC).
The BUILD server and IIS WebServer have to be as "stripped-down" as possible in order to go through our QAT and Impact Analysis process.
So far we have had success if we deploy the SDK-only install from the Crystal Reports XI (R2) DEVELOPER package, and the service packs, but it doesn't include all the SDK components for other BOE content types.
If we deploy the Client-only install from the BOE-XI (R2) package, and the service packs - it doesn't seem to include the CR-Viewer which we need. But it does includes a bunch of extra software (eg. UNIVERSE DESIGNER) on the desktop of the BUILD server and IIS WebServer that our QA guys don't like.
What are the Minimum Software required for BUILD server and IIS WebServer to support CR and BOE SDKs...?
Are there any install packages that contain JUST those components, and not all the extra software that is not needed to Build/Deploy in .NET...?
Thanks in advance for the advice.

Due to the CrystalDecisions.web.dll for the 2.0 framework being left off the BOE CD you will need to install the Crystal XI R2 runtimes as well as the BOE SDK.
To get the BOE SDK launch the Enterprise XI R2 installer and choose Server Install - not Client Install. Choose a Custom install. You'll be presented with a drop down list for the Enterprise components. Deselect everything and then look for the Developer Components option. You may have to drill down into one of the levels to find it. Under Developer Components you'll see the BusinessObjects Enterprise .NET SDK. Select it to install it.
Jason

What are the essential services that are required for ensuring server is healthy up ?

Hi All,
Please advise me What are the essential services that are required for ensuring server is healthy up ?
Warm regards,
jk1510

The easiest way to find the Health report of server or workstation follow the below steps which is very much easiest way to get it done
There are a few ways to find this in Windows Server 2008.
First click “Start” and type “Generate a system health report”
Or second navigate your way to the Control Panel choose “System and Security” and choose “Generate a system health report”.
The last is to type “Generate a system health report” into the “Search Control Panel” box in the upper right hand corner of the Control Panel window.
Once armed with this data it’s easier to refute or acknowledge an issue is at hand.
BTW if you’re looking for this same thing in Windows 7 it’s there just buried a bit more.
Search Performance in the Start Menu, choose “Performance Information and Tools”, click “Advanced Tools” from the menu on the left, and finally choose “Generate a system
health report”.
Ref: http://blogs.technet.com/b/rmontee/archive/2012/02/23/generate-a-system-health-report.aspx
Exchange Queries

Dns setting require for mail server 2013

Similar Messages

Maybe you are looking for