DNS Setup Check Required...Please Help

I have setup a Tiger Server machine running 10.4.9 (IP: 10.0.1.2)
It is running a DNS server (smserver.strategies.ca)
The following aliases have been set: mail, www, ftp, vpn. ns1
Recursion is ON
Zone Transfer is ON
Our Airport Extreme N Router has a static public IP
Port forwarding TCP/UDP on port 53 has been made on the router to point to the server (10.0.1.2)
At our registrar, I put the primary nameserver to be smserver.strategies.ca with the IP being the static public IP I put on the Airport Extreme Router.
Something is not working.
From the outside, if I do:
host smserver.strategies.ca
I get Host smserver.strategies.ca not found: 3(NXDOMAIN)
Same thing if I try with any of the aliases I created.
What am I missing or doing wrong? Are there any files I need to edit?
Please help as this is pretty urgent. It needs to result with the public static IP set on the router.
Thanks to all in advance.

Your DNS is incorrect.
If I run host smserver.strategies.ca I get:
smserver.strategies.ca has address 10.0.1.2
You shouldn't ever publish 10.x.x.x addresses to the public internet. They're not valid.
If this machine is running public DNS for your domain you need to enter the proper, valid public IP addresses in your zone file, not your internal addresses.
If you want your internal clients to see a different result then you need to setup two DNS servers, one for the public view and one for internal. This can be done via one BIND server, using views (which use the source IP address of the query to determine which result to return), but you can't do this via Server Admin, only manually.

Similar Messages

Check printing ,Please help : Urgent!!!!!!!

One of the user printed wrong information on a check.She wants to void that check and reprint a new one.The information also came on next check,But the information of second check is not the check lot ,I mean in the system,where as first check information is in the check lot.Which T. codes do we use and how do i deal with second check..Do i need to do anything in FCHI(make changes to next available check number).Please help me as she needs it immediately.
First check : 1469
second check: 1470
1470 information is not in the system.
I will assign you points.
Thanks

hi first check in FCHI - as to what your range is. post your range here. Then go to FCh1 and view the check info. maybe you have the test out put checked so the first check is voiding automatically. Aslo check in FCHN
Points will be appreciated
Regards,
Zaid

My router internet connection won't except googles 8.8.8.8. dns why can someone please help me, my router internet connection won't except googles 8.8.8.8. dns why can someone please help me

my router internet connection won't except googles 8.8.8.8. dns why can someone please help me, my router internet connection won't except googles 8.8.8.8. dns why can someone please help me

naaa didnt work if you or any body else has any other ideas im open cuase now im thining about just taking it into apple and getting a new one but my friend said that he recently did the exact same thing and the apple store declined him cuase it was jailbroken sooo i really dont know what to do ....the purpose of getting the knew ipod was to have imessge and the new facetime and know that it isent working i dont know what to do or how to do it the correct way...............but thnk u Eric Ross and llaass

I have changed default language in the program & have set Language & region in system preferences. My Word (Mac2011) keeps on changing the default language to US english every time I check. Please help!

I have changed default language in the program & have set Language & region in system preferences. My Word (Mac2011) keeps on changing the default language to US english every time I check. Please help!

If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

I downloaded lion but lost the setup assistant. please help me recover the setup assistance. i do not know where/how to find/enter information in the terminal.

i downloaded lion but lost the setup assistant. please help me recover the setup assistant. i do not know where/how to find/enter information in the terminal as was suggested.

Launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search. Copy or drag -- do not type -- the line below into the Terminal window, then press return:
sudo rm /var/db/.AppleSetupDone
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. Confirm.
Reboot. The Setup Assistant will launch.

HT4759 When I try to return to my last backup, it tells me the IOS7 required, please help.

When I try to return to my last backup, it tells me the IOS7 required, please help.

Did you install the beta version of iOS 7 on your phone? If so, and you are a developer, you must post in the developer forums. If you are not a developer, you are stuck and will not be able to get assistance on these forums.

HT201317 My iPhoto keeps telling me that it is unable to connect with photo stream and when I click on Photo Stream in iCloud settings, a few minutes later, it is un checked. Please help. Photo Stream works on my iPad and iPhones, just no longer on my mac

Hi. When icloud first came out it worked well on all of my mac devices (macbook pro, ipad, iphones). However now it no longer works on my computer. When I go to system preferences it is unchecked and when I check to enable it, it tells me it can't. I also go to iCloud settings and when I check the photo stream box a few minutes later it is unchecked (which I never do). Please help.

Mmmm, I was hoping there might be a few more clues.
With little confidence you might try the following.
Reset photostream at iCloud.com.
Log out/in of iCloud on your Mac.
Trash your system preferences plist.

Airport express setup, not working, please help me out

i recently purchased a airport express so that i can extend the range of my current network, use airtunes, and have wireless printer sharing. My base station is a d-link router, and from there i have been having a lot of problems. I have been able to set up the airport express part of the way, but not with complete functionality. I have been able to use it for music and i havent tried printing, but i cannott connect through the internet with it, i have to revert back to my base station router for that.I have tried the entire manual, scoured the mac support website and googles this problem for hours with no end. please help me out here, this is getting pretty frustrating
thanks for all the help in advance

Hello CAUTION5697. Welcome to the Apple Discussions!
Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your D-Link router can be extended wirelessly with the AirPort Express Base Station (AX).
The few that are known to work are:
o another Airport Express Base Station
o 802.11g Airport Extreme Base Station (AEBS)
o 802.11n AirPort Extreme Base Station (AEBSn)
o Linksys WRT54G or WRT54GS (not v5)
o Belkin F5D7230-4 and F5D7231
o BT Voyager 2091
o Netgear WGR614 v6
o Buffalo WGR-G54
Instead, you can configure the AX to "Join an existing wireless network" for both streaming iTunes and for sharing a USB printer. Check out the following Apple article on how: AirPort Express: How to join an existing wireless network in client mode

Swings Urgent Requirement, Please Help me

Hi ,
I have a requirement like when a file dialog is displayed, I have to select only directories/folders. Now with using JFileChoser , I am able to choose file . Is there any possibility to choose only directories without file dialog or atleast by using filedialog?. If some solution Please help me as this is urgent requirement.
Thanks and Regards,
Rajeev L.

JFileChooser has an instance method public void setFileSelectionMode(int mode)
call when initialising the file chooser.
chooser.setFileSelectionMode(JFileChooser.DIRECTORIES_ONLY );

CQ60 Optical drive check. Please help.

I have a Compaq CQ60-422DX laptop. I did an optical drive check through the HP Support assistant software. My DVD-RW drive is working fine (plays, rips, and burns CDs and DVDs as it should). I even checked the device manager for good measure. But when I used the optical drive check on the HP support assistant software, the result came on as "Action Needed," in terms of the reading check but it doesn't tell me exaclty what the reason is and it just directs me to the general Windows Help application. What seems to be the problem? please help.

Buy Disk Warrior and use it to repair your OS X volume (if it's repairable.) If DW cannot repair the volume then use Disk Utility to reformat the volume using the Zero Data (one pass) Security option.
Do you have a backup of your OS X volume? Since you have tried using TDM to access the drive without success it's reasonable to assume your data may be lost. If you have an external hard drive you can use, then you could attempt to use file recovery software to see if your data are recoverable.
At this point it is premature to assume the drive is bad since your Windows volume is functional. If you have Windows software for reading Mac drives you may try accessing the OS X volume from Windows.
Basics of File Recovery
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten with recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

I cannot get my iphone 4s to allow the phone to ring. It only vibrates. I have checked everything please help.....

I cannot get my iphone 4s to allow the phone to ring. It only vibrates. I have checked everything. Please help......

What "everything" includes?
When you select a ringtone what happens? (Try to change from a ringtone to another).
Did you tried a reset? Hold down Power and Home buttons together until Apple logo appears. Then release and wait to reboot.
Check again.

Hi i just synced my iphone to my new laptop ive lost all my ringtones and i tried to buy anouther and it says tones are not available on this device, a device that can run i0s 5.0 or later is required please help :(

hi i just synced my iphone to my new laptop ive lost all my ringtones and i tried to buy anouther and it says tones are not available on this device, a device that can run i0s 5.0 or later is required please help

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

E72 email setup problems. Please help

I am trying for some time now to set up my email account on my new Nokia E72 without any succes. I hit the email setup button, chose the right acces point provided by the mobile company and after I enter the email and password the mesage "maximum number connections in use. Close an active connection first" appears. Here I only have two options OK or CANCEL. Hitting CANCEL it just gets out of what I was doing. Hitting OK it only gives me the acces point which I am using without any other option so I have to close it. Could anyone help me with this problem please?

Then you better check if other apps like Facebook, Worldmate, etc.. use connections.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Unable to configure Mail setup for SMTP : Please Help

Hi experts,
             I have been trying since 2 weeks with most of the links like help.sap.com, and other links which experts are sugested, but then also I am uable to configure the mail setup for a SMTP server from SAP R/3 4.7EE.
          Couls anyone help me please,
Challenge: I want to send mails from SAP system to other internet servers or mail servers.
                SMTP server is installed,
                 SAP R/3 4.7ee is in place.
I request you experts please provide the exact step by step procedure to configure, so that I should not run behind the links.
Thanks in advance,
Sunil

Hi Juan, Hi Juan,
             Thanks for your reply, I am happy that one big hope has come. regarding my issue its starts from the SCOT configuration, I have created the Node, and under support address types selected INTERNET type.
Under INTERNET settings
address area = *mail
have not mentiond RFC destination.
Hope this info will guide you my issue.
Thanks in advance,
Sunil

SEM / BW upgrade advise required - Please help urgently

Hi,
We have migrated from a different company (January 2006) where they were using SEM -BPS and BCS. After the migration, we are not using SEM. Our BW version is 3.10. Our SAP R/3 version is 4.6C.
Now, We are planning to implement SEM- BCS. Our existing system component informations are as below.
SAP_BW - Release 3.10 (Support pack 22)
SEM_BW -Release 3.50 (Support pack17)
SAP_BASIS - Release 6.20 (Support pack 54)
SAP_ABA -Release 6.20 (Support pack 54)
PI_BASIS - 2004_1_620 (Support pack 10)
FINBASIS -200 (Support pack18)
BI_CONT - 330 (Support pack 17)
We have the following questions. Please advise.
1. Understood that the mainstream maintenance for BW 3.10 has ended on December 2006 ( The same for SAP_SEM: 3.50 also). So, If we upgrade to BW3.5 (Netweaver 2004), whether we will get the SEM 4.00 along with the upgrade so that we will have everything BW 3.5 and SEM 4.0 in a single box?
2. I am still seeing that the SEM_BW version 3.50 in the system component informations. Does that mean that we still have SEM components within BW 3.10? If yes, can we upgrade this to SEM 4.00 so that our BW system will get upgrade to BW 3.5?
3. Or what is the alternative, you suggest so that we will have SEM4.0
We are confused. Please advise at your earliest.
Please also send some links where we can compare the versions for BW/ SEM.
Thanks .
Message was edited by:
BW USA

Hi,
With BW 3.5 you'll need to upgrade SEM to SEM 4.0.
With 3.1 you'll have SEM components if you had installed SEM earlier. You can upgrade SEM separately in this case. Check the release notes to make sure that it dosen't require any upgrade or patch upgrades to your existing BW components.
For your BCS implementation, check what functionality you need, because most of the functionality that BCS projects use are available with BW 3.5 and SEM 4.0. So chances are that even f just upgrade SEM to ver 4.0 you might still have to upgrade your BW to ver 3.5 in order to utilize the full functionality.
You can search this forum for links on the upgrade and comparisions. Other good sources will be the release notes for upgrades on the SAP site.
Cheers,
Kedar

DNS Setup Check Required...Please Help

Similar Messages

Maybe you are looking for