DNS SRV Proxy Lookup and Failover Mechanism / Unexpected Behavior
Group,
I came across some unexpected behavior yesterday I was wondering if someone could help shed some light on the problem. In my DNS I created this record: _sip._upd.platautofinance.com which when I do a query using MX Toolbox it is correctly reporting the following:
On the SPA504 I have programmed the SRV records into the system using the following:
So here is the issue, the phones will register correctly to the primary server but after a length of time ALL the phones will abandon ship and jump to the secondary server and stay there. I have to manually shut the secondary down, reboot the endpoints at which point they will re-register with the primary. So I think I need to understand the mechanism a bit better. Here is what I can think of:
The phones are not using the primary DNS service record providers DNS servers, we are using OpenDNS instead of Network Solutions <-- Unlikely because the SPA would not be able to resolve the SIP SRV records / servers at all with a broken DNS resolution. I can tell by dropping from the primary to the secondary that resolution is taking place on the phone because they are jumping between the right ones.
My understanding is the proxy fallback interval should have the phone register (and they should be checking periodically if the primary is available again and if so, re-register the to the lowest-weighted server) but that's not happening without a manual reboot. Once on the secondary they want to stay there.
My firewall for both the primary and secondary servers do not answer ICMP.
So the question is: why do the SPA phones think the primary is offline? What is the mechanism or criteria the SPA uses to determine a server is offline and then rolling to the secondary? Why do they want to stick around the secondary which is using only a best effort connection when we have a bonded T on the primary?
Thanks as always for your help and input group! Appreciate your time.
Hello Adam,
I believe it will be easier if you call SBSC and ask the questions directly. The questions are very good and exact. I will try to answer shortly. Assuming you use only CCA to configure the system.
1. If you have set dns for your internet connection it should work, you may try with different dns servers. Please delete the SIP trunk and recreate it.
2. Please delete the SIP trunk and recreate it.
3. If you need to configure more codecs through CCA you may send feature request using envelope button of the CCA.
I hope the above answers will be helpful although very short. If they are not helpful please contact SBSC and open a case.
Best regards,
Alex
Similar Messages
-
Blazeds proxy service and failover
Hello everyone,
I've been using Blazeds for web services proxying. It's working great so far, but I'd like to add some failover mechanism.
here below is a bird view of my architecture
And what I'd like is to be able to support failover on business layer webservices, something like :
I don't know if it's possible or not and if it is how I can achieve it. I was thingking about some failover tag in the proxy-config.xml to set several wsdl entries (URI-master, URI-slave...) but I didn't find nothing about that in the documentation. But maybe the solution is something drastically different .Anyway I hope that there is a way to make this possible
Thank you in advance for your help.
OlivierHi,
Can you please share the code? See if you can find any errors
in your stdout log file of your web server. If you find any errors
and cannot fix it, please share the code and the errors from the
log file.
Hope this helps. -
UCCE for CCM failover with DNS SRV.
we are testing UCCE for CCM failover with Local DNS SRV. We have enabled the "Use DNS SRV type query:YES"&"Resolve SRV records locally:1" on CVP Call server configuration SIP tab.
The srv.xml file updated with CCM IP addrs in this path \Cisco\CVP\conf\srv.xml
On testing, the agent state moved to reserved state, but call is not delivered. Static Route is added for Phone Extension as "500>,proxy.ipcc.com".
What will be the issue? Kindly let me know what needs to be done.
Thanks & Regards
JP.So, as Markus already figured out, you need to make sure that your CUCM actually understands that it is the intended recipient for these SIP INVITEs. I.e. if you define the static route to point to cucm.cisco.com you have to specificy the specify the Custer FQDN to be cucm.cisco.com under the 'Cluster Wide Domain Settings' in the CUCM Enterprise Parameters.
A second thing to watch out for the CUCM Group assigned to your SIP Trunks. Each SIP Trunk, like any CUCM device, has a Device Pool, the device pool has a UCM Group defining on which UCM nodes that device 'exists'. For phones that typically means : which UCM nodes can I register to ?
But for SIP trunks this means : which UCM nodes have a SIP deamon process for this Trunk and so which of the UCM nodes will actually accept INVITEs for this trunk. The most common cause for 503 Service Unavailable is probably this, (not all) the CUCM nodes in your DNS / srv.xml round robin are in the UCM Group assigned to the Device Pool configured on the SIP trunk for this Call Server.
Cheers,
Kris -
CUCM IM and P Design - DNS SRV -
Hey guys.
I would like to design a CUCM IM and P infrastructure for my customer. High availability is mandatory for my customer and here is what I found from the documentation:
Configure SIP Trunk for IM and Presence Service
If high availability is configured for the IM and Presence cluster, multiple entries should be entered in the Dotted IP Address or FQDN to identify the various nodes in the cluster. DNS SRV cannot be used for an IM and Presence cluster if high availability is configured.
So SRV record can't be used for an IM and P cluster.
Now if I want to configure a presence gateway on the CUCM IM and P, the configuration guide says that we must configure a CUCM as a presence gateway to enable SIP connection:
The problem is that I cannot configure 2 or more CUCM Presence gateways ... and for that I have to use a DNS SRV.
But I can't use an DNS SRV because I am using high availability ... This is a chicken and egg problem to me :)
Does someone has a recommendation please ?
Thanks guys :)Actually, the config guide allows DNS SRV on the Presence Gateway config of the IM&P servers:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/configAdminGuide/10_5_1/CUP0_BK_CE43108E_00_config-admin-guide-imp-105/CUP0_BK_CE43108E_00_config-admin-guide-imp-105_chapter_0111.html#d54883e741a1635
It appears they are only disallowing SRV in the CCM to IM&P SIP Proxy, not the other way around. -
Can Cisco SPA phones use DNS SRV record to find and select outbound proxy even if there are 3 or 4 answered from the DNS query?
Is there a way to over-ride the cost and weight with custom selection method?If implemented according RFC2782 the device should contact proxy1.doman.com, then proxy2.doman.com then either proxy3.doman.com or proxy4.doman.com with probability 50:50.
So what's your question ? Are you asking if particular device's resolver follow the RFC2782 correctly ? You didn't specified device nor exact firmware version so it's not possible to answer. And implementation may vary between product's model and firmware version.
Just try it on your particular hardware and firmware - it's simple test. It should work if implemented correctly ...
Sorry if it's not the answer you wished for ... -
How to find out the primary and failover DNS name
Hi;
This sounds very stupid, but could some one please tell me how to find out the name/dns name of the primary and failover server without using the CDS console.
any help is appreciatedIs this what you want?
$ /usr/lib/ldap/ldap_cachemgr -g
cachemgr configuration:
server debug level 0
server log file "/var/ldap/cachemgr.log"
number of calls to ldapcachemgr 12729
cachemgr cache data statistics:
Configuration refresh information:
Previous refresh time: 2005/08/07 23:54:59
Next refresh time: 2005/08/08 00:55:00
Server information:
Previous refresh time: 2005/08/14 15:15:00
Next refresh time: 2005/08/15 03:15:00
server: ldap1.example.com, status: UP
server: ldap2.example.com, status: UP
server: ldap3.example.com, status: UP
Cache data information:
Maximum cache entries: 256
Number of cache entries: 0
Gary -
SPA 5xx and 9xx phones registering to all proxies with DNS SRV records
A weird situation -- I use DNS SRV records to prioritize the two Asterisk servers to register to (east coast vs west coast). However it seems that phones are often registering to BOTH servers and show as live on both at the same time. There seems to be little rhyme or reason as to when it occurs, but it's weird. Fortunately the phone does seem to be preferring the higher priority SRV record but I can't figure out why it is registering to both.
This happens with SPA-942s (6.1.5a) and SPA504Gs (7.4.9c).
Any ideas what makes this happen? On the surface it seems like a good thing, but functionally the phones are registering the same port numbers and only the priority server can get through firewalls with traffic for the phones. This screws up my "presence" indicators within the system.
DNS SRV RECORDS:
_sip._udp.west.server.net (for west coast customers)
Priority 10: west coast machine
Priority 20: east coast machine
_sip._udp.east.server.net (for east coast customers)
Priority 10: east coast machine
Priority 20: west coast machineWe determined this was not actually happening. There was a syncing taking place in the background that was giving the impression this was happening but it really was not.
-
SMTP Routes, DNS and Failover
Hi !
I'm configuring an outgoing server (i.e. only a private listener) on ESA C370 with AsyncOS 8.0.1.
I use the Internet's Root DNS Servers, and my default SMTP route is empty. My ESA is connected to 3 networks : production (default gateway), administration and failover (1 interface/network).
I would like to deploy a failover solution with an extra ESA on the failover network : if I lose my internet connection (impossible to join DNS and remote MX), my ESA would redirect all its mails to the extra ESA.
How can I do that ?
Thank you for your help.
Best Regards
QuentinThe ESA has no way to automatically fallback to a static IP if DNS in unreachable. The best on-box solution I can suggest is manually changing the 'All Other Domains' SMTP Routes entry when such an event occurs.
I hope this helps!
- Jackie -
Network Load Balancing and failover for AFP Sharing
Dear all,
Somebody kindly teach me to use round robin DNS to perform the network load balancing, it's success but not the failover.
I have 4 xserve and want to do the load balancing and failover at the same time.
I have read the IP failover document and setup it successfully, but anyone know is it possible to do the IP failover for more than 2 server?
For example, 4 server serving the AFP service at the same time, maybe I have 1 more extra server to do the IP failover for thoese 4 servers.
As I know, IP failover require Firewire as the heartbeat detection. But one xserve only have 2 firewire ports. May I setting up the IP failover only by a ethernet port and an IP address? does it possible to detect and failover to any server after server down has been detected?
I believe load balancer maybe the best solution but its cost is too high.
Thanks any advance!
Karlleewell, u have 2 options here
software load balancing
request comes it foo.com -> ws7u2 hosting foo.com is configured to run as reverse proxy . this server sends any incoming requests to one of the four back end web server 7 handling your incoming request
hardware load balancing (this you need to invest)
request comes to hardware load balancer who responds for foo.com -> sends requests to four ws7 server hosting your application
you could try out how software load balancing works out for you before you invest in hardware load balancing
here is more instruction on configuring ws7 + reverse proxy (software load configuration)
- install ws7 on foo.com
- create a new configuration (choose port 80, disable java -
Different SBA DNS SRV entry for the same dns zone?
Hello,
I got here a testlab with one enterprise pool and one sba deployed. The Branch Site got also an DNS Server installed. Both are using the same dns zone "test.com".
Of course now i got different server for the same SRV Record _sipinternaltls._tcp.test.com - one for autodiscovery in the enterprise pool and one for the sba. Also I want to add the second one as failover srv + the DNS Server in the Enterprise Pool should
be used as a Forwarder.
Now I got some issues how to deploy several entries on two different dns server for the same zone.
1.) If I add manually the same zone + DNS SRV entries on the SBA the dns is somehow not resolving/forwarding the entries on the other dns server in ee to other servers which are not on my SBA dns.
2.) If I only pinpoint the SRV entries for _sipinternaltls._tcp.test.com (one for sba and failover for ee site) the dns won't resolve the second a record to the enterprise pool.
What is the Best Practise for DNS SBA? Always point to the enterprise pool and, therefore, no other configuration is needed?
Regards DrWhoI played a little bit around. Problem was that I can not add the pinpoint dns srv entries via gui. Aditionally the tutorials did not work as my DNS server for SBA is not on a domain controller. In the end I did this:
sbafe -> fqdn of my sba
eefe -> fqdn of my frontend of enterprise pool
dnscmd . /zoneadd _sipinternaltls._tcp.test.com. /primary /file _sipinternaltls._tcp.test.com.dns
dnscmd . /recordadd _sipinternaltls._tcp.test.com. @ SRV 0 0 5061 sbafe.test.com.
dnscmd . /recordadd _sipinternaltls._tcp.test.com. @ SRV 10 0 5061 eefe.test.com.
dnscmd . /zoneadd sbafe.test.com. /primary /file sbafe.test.com.dns
dnscmd . /recordadd sip.sbafe.test.com. @ A 192.168.10.220
dnscmd . /zoneadd eefe.test.com. /primary /file eefe.test.com.dns
dnscmd . /recordadd sip.eefe.test.com. @ A 192.168.0.40
Question is if that is a good best proctise or should the dns server within a zone contain the same records (Primary/Backup). The Client will then always hit the FE of the EE Pool first.
Also its quite a lot of work to setup. -
Cisco Jabber for Mac - Directory Lookup and Contact Fields
Hello,
After having issues myself with Cisco Jabber for Mac 9.2 specifically with Active Directory lookups not working, or contact information not populating (and therefore not being able to call users from the contact list as no telephone information exists) I am including a sample jabber-config.xml file that works for me.
Please note: there are many different ways to configure this. What I will be showing is the method that works for me and my deployment, which is pretty standard.
As always and as a disclaimer, once again, this is what has worked for my deployment scenario. Always keep backups of your configuration files, and always be mindful of anything you have configured already, especially in the jabber-config.xml file.
Background
My deployment is based on CUCM 9, with 1 publisher and 2 subscribers. I also have a CUCM IM & Presence 9.0 server. This assumes that you have already configured your deployment and Jabber is functioning already, albeit with the aforementioned issues.
As for Active Directory, my deployment will be based on Windows 2008 R2 Domain Controllers running in native 2008 mode. For this example, we will be searching directly against one of the DCs with a Global Catalogue role. Please be aware that in large deployments you will have to plan accordingly with regards to lookup traffic from Jabber clients to the DCs.
Also, as of Cisco Jabber for Mac 9, the client no longer can search via the CUCM internal directory (which may be made of local end users, Active Directory synced users, or a mix of both) and this must be done via a LDAP mechanism.
Scenario
In this deployment scenario, Cisco Jabber for Windows is working properly - you can search and add people from Active Directory, and contacts in your contact list have all the appropriate fields populated from Active Directory. However, when trying the same with Jabber for Mac, Jabber for iPhone or Jabber for iPad you notice that you cannot perform a directory lookup, and if you add people directly (for example, [email protected]) the user only has the IM field populated. No telephone, email or additional information is displayed.
Solution
Whereas Cisco Jabber for Windows uses the EDI mechanism (native Windows), whereby when running from a computer that is on the domain (or in the event that you are search for contacts in another Active Directory domain where a domain trust exists) , Jabber for Mac / iPhone / iPad uses the BDI mechanism.
In this case, you will need to provision a jabber-config.xml file that you will upload to your TFTP server (or Publisher) that will be "downloaded" by your Jabber for Mac client and also used by the iPhone and iPad client. You can configure many options in the jabber-config.xml file, but for this example we will place just the information that we need to order for these clients to request and display Active Directory information.
Please note that the configuration may vary depending on your deployment, but at the very least we will be:
- Configuring a DC where we will perform the lookup.
- Configure credentials that will be used to perform the lookup. This will be an Active Directory account that has read rights on the Active Directory domain. Please note that these credentials are saved in plain text in the file, so ensure that the account that you will be using is not privileged.
- Configure the server port that we will be using to perform the lookup.
- Configure the Search Base. This is basically where we want the directory lookup to happen. You can either choose for this lookup to start at the "base" of the domain (and therefore the search will iterate through all the user accounts and and OUs below the root base) or define a specific OU where you want to search.
Caution!
- There is a current limitation with Cisco Jabber for Mac whereby you can only have 1 search base configured. Please keep this in mind if, like me, you have multiple OUs (like an OU for each company in your organization) and under these OUs you have sub OUs as a user account container.
- If using the top level search base, unless you specify a filter, you will potentially be able to search for all user accounts in the domain. You will need to configure the <BDIBaseFilter> parameter if you want to fine tune your search ability.
Steps
These are the steps I have followed. Other steps or considerations may vary.
- Log in to your TFTP server and download the jabber-config.xml file and keep it as a backup. If you are already using the jabber-config.xml file for other purposes, do not worry - you can add your BDI information parameters inside.
- Remove the jabber-config.xml file
- Edit the jabber-config.xml file and configure thus:
<?xml version="1.0" encoding="UTF-8"?>
<config version="1.0">
<Directory>
<DirectoryServerType>BDI</DirectoryServerType>
<BDILDAPServerType>AD</BDILDAPServerType>
<BDIPrimaryServerName>DOMAIN CONTROLLER IP ADDRESS</BDIPrimaryServerName>
<BDIPresenceDomain>YOUR PRESENCE DOMAIN</BDIPresenceDomain>
<BDIServerPort1>3268</BDIServerPort1>
<BDISearchBase1>YOUR SEARCH BASE</BDISearchBase1>
<BDIConnectionUsername>[email protected]</BDIConnectionUsername>
<BDIConnectionPassword>PASSWORD</BDIConnectionPassword>
<BDIEnableTLS>0</BDIEnableTLS>
</Directory>
</config>
For example, let´s assume the following:
- Domain controller IP address is 10.1.1.2 .
- Your presence domain is test.local .
- Your search base will be test.local using the top level of the domain.
- Your username with which you will be doing your searches is called walt . Usually you can either identify walt as test.local\walt or [email protected] . It is always best, in these sort of scenarios, to use the UPN convention so we will be configuring a [email protected] .
- The password is the Active Directory password for the account walt .
- I have disabled TLS in my case. There are issues with the Jabber for Mac client when using other security methods.
<?xml version="1.0" encoding="UTF-8"?>
<config version="1.0">
<Directory>
<DirectoryServerType>BDI</DirectoryServerType>
<BDILDAPServerType>AD</BDILDAPServerType>
<BDIPrimaryServerName>10.1.1.2</BDIPrimaryServerName>
<BDIPresenceDomain>test.local</BDIPresenceDomain>
<BDIServerPort1>3268</BDIServerPort1>
<BDISearchBase1>DC=test,DC=local</BDISearchBase1>
<BDIConnectionUsername>[email protected]</BDIConnectionUsername>
<BDIConnectionPassword>walt01!</BDIConnectionPassword>
<BDIEnableTLS>0</BDIEnableTLS>
</Directory>
</config>
One you have configured the jabber-config.xml file, you will now need to upload it to you TFTP server. Once uploaded, you will need to restart the Cisco TFTP service. Again, my TFTP server is on my CUCM publisher, so:
- I go to Cisco Unified OS Administration on my Publisher server, TFTP File Management and I upload jabber-config.xml to / directory
- I then go to Cisco Unified Serviceability on my Publisher server, I locate the Cisco TFTP service and I restart the service
Once this is done, you can figure up your Jabber for Mac client. As a test, on your Mac (using Terminal) go to:
/Users/username/Library/Application Support/Cisco/Unified Communications/Jabber/Config
In here you will see several files, but what we want to see is jabber-config.xml . As soon as you start the Jabber for Mac client and log in, the jabber-config.xml file will download from your TFTP server and get saved here. When you see it appear, just type in your terminal window more jabber-config.xml and make sure that the output is the same as the xml file you created.
From there, try doing directory search. If you have previously added contacts and they still lack attribute information, you will need to remove them (sometimes it will not refresh properly) and add them again from the directory.
I will be updating this guide and ammending anything that is incorrect, but this is meant to be a quick checklist and steps to get this, at least in the most very basic version, up and running for Jabber for Mac.Hello,
Thanks for this post! It works, I can do lookup and also I can add found contact to contact list and get information about contact from LDAP.
One more question: - I can't get all information about contact. I don't get e.c mobile phone number and more others attributes. I have tried to expand your file as follows:
<?xml version="1.0" encoding="UTF-8"?>
<config version="1.0">
<Directory>
<DirectoryServerType>BDI</DirectoryServerType>
<BDILDAPServerType>AD</BDILDAPServerType>
<BDIPrimaryServerName>IP of AD</BDIPrimaryServerName>
<BDIPresenceDomain>Presence Domain</BDIPresenceDomain>
<BDIServerPort1>3268</BDIServerPort1>
<BDISearchBase1> Search Base</BDISearchBase1>
<BDIConnectionUsername>User</BDIConnectionUsername>
<BDIConnectionPassword>Password</BDIConnectionPassword>
<BDIEnableTLS>0</BDIEnableTLS>
<BDISipUri>msRTCSIP-PrimaryUserAddress</BDISipUri>
<BDIPhotoSource>thumbnailPhoto</BDIPhotoSource>
<BDIBusinessPhone>telephoneNumber</BDIBusinessPhone>
<BDIMobilePhone>mobile</BDIMobilePhone>
<BDIHomePhone>homePhone</BDIHomePhone>
<BDIOtherPhone>otherTelephone</BDIOtherPhone>
<BDITitle>title</BDITitle>
<BDICompanyName>company</BDICompanyName>
<BDILocation>co</BDILocation>
<BDIPostalCode>postalCode</BDIPostalCode>
<BDICity>l</BDICity>
<BDIState>st</BDIState>
<BDIStreetAddress>streetAddress</BDIStreetAddress>
</Directory>
</config>
But it didn't help.
When I capture lookup via Wireshark, I can see that Jabbers sends search request with bunch of attributes, but from LDAP answer contains only 8 attributes. (see attached screenshots) -
so we currently have three domain controllers set up, two of them on 2012r2 and one of them on 2008r2. prior to any of these domain controllers being added to the domain there was only one, running on 2003r2. the 2003r2 server was up and running when the
first 2012r2 was added and that's when running 'dcdiag /e /c /v' would yield an issue with "_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local" in the DNS portion of the diagnostics, specifically:
TEST: Records registration (RReg)
Network Adapter [00000010] Microsoft Hyper-V Network Adapter:
Error:
Missing SRV record at DNS server 192.168.22.4:
_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
after adding the second 2012r2 to the domain, this issue is still there... adding the 2008r2 server to the domain and running BPA it gives the following:
Title:
This domain controller must register a DNS SRV resource record, which is required for replication to function correctly
Severity:
Error
Date:
7/3/2014 11:24:48 AM
Category:
Configuration
Issue:
The "DcByGuid" DNS service (SRV) resource record that advertises this server as an available domain controller in the domain and ensures correct replication is not registered. All domain controllers (but not RODCs) in the domain must register this record.
Impact:
Other member computers and domain controllers in the domain or forest will not be able to locate this domain controller. This domain controller will not be able to provide a full suite of services.
Resolution:
Ensure that "DcByGuid" is not configured in the "DnsAvoidRegisteredRecords" list, either through Group Policy or through the registry. Restart the Netlogon service. Verify that the DNS service (SRV) resource record "_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local", pointing to the local domain controller "CM-DC4-NY01.cmedia.local", is registered in DNS.
More information about this best practice and detailed resolution procedures: http://go.microsoft.com/fwlink/?LinkId=126968
I've tried scanning and then re-scanning every single entry in DNS Manager and do not see any reference to this specific GUID mentioned, nor do I see any other domain controllers referenced that should not be in there. The two 2012r2 and the 2008r2 domain
controllers are the only ones listed in DNS Manager... the 2003r2 mentioned earlier failed and was removed.Just to chime in, I noticed that you said you have one 2008 R2 DC, and two 2012 DCs.
I also noticed in the ipconfig /all that all DCs are pointint to themselves for DNS. We usually like to see them point to a partner, then itslelf as the second entry, w hether loopback or by its own IP.
Based on that, what I suggest to level the playing field by choosing the WIndows 2008 R2 DC as the first DNS on all DCs and only administer DNS using that DC. The reason I chose that is because of the least common denominator is what we rather use so we
don't invoke any new features in the newer 2012 DNS console that 2008 R2 may not understand. After that's done, on each DC run (and you can use a PowerShell window to run this):
Rename the system32\config\netlogon.dns and netlogon.dnb files by suffixing ".old" to the file.
ipconfig /registerdns
net stop netlogon
net start netlogon
Then re-run the dcdiag /e /c /v.
Post your results, please.
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.
I thought the DNS entries were supposed to be the other way around? point to themselves first and a partner as secondary? regardless, as requested, I've changed it to what you've prescribed where they point to the 2008r2 server as the primary with themselves
as the secondary. I've also followed the steps to what seems like refreshing the DNS? on each of the DCs. Here's the output from dcdiag /e /c /v
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine CM-DC1-NY01, is a Directory Server.
Home Server = CM-DC1-NY01
* Connecting to directory service on server CM-DC1-NY01.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=cmedia,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory
=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia
,DC=local
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=cmedia,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=nt
DSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
,CN=Configuration,DC=cmedia,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
,CN=Configuration,DC=cmedia,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
,CN=Configuration,DC=cmedia,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 3 DC(s). Testing 3 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\CM-DC1-NY01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... CM-DC1-NY01 passed test Connectivity
Testing server: Default-First-Site-Name\CM-DC3-NY01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... CM-DC3-NY01 passed test Connectivity
Testing server: Default-First-Site-Name\CM-DC4-NY01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... CM-DC4-NY01 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\CM-DC1-NY01
Starting test: Advertising
The DC CM-DC1-NY01 is advertising itself as a DC and having a DS.
The DC CM-DC1-NY01 is advertising as an LDAP server
The DC CM-DC1-NY01 is advertising as having a writeable directory
The DC CM-DC1-NY01 is advertising as a Key Distribution Center
The DC CM-DC1-NY01 is advertising as a time server
The DS CM-DC1-NY01 is advertising as a GC.
......................... CM-DC1-NY01 passed test Advertising
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
Checking machine account for DC CM-DC1-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC1-NY01.cmedia.local
* SPN found :LDAP/CM-DC1-NY01
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia
* SPN found :LDAP/a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/a29d12f1-2869-44bf-8e43-adf7ddf33865/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local
* SPN found :HOST/CM-DC1-NY01
* SPN found :GC/CM-DC1-NY01.cmedia.local/cmedia.local
[CM-DC1-NY01] No security related replication errors were found on this DC! To target the connection to a
specific source DC use /ReplSource:<DC>.
......................... CM-DC1-NY01 passed test CheckSecurityError
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC1-NY01 passed test CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... CM-DC1-NY01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... CM-DC1-NY01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC1-NY01 passed test SysVolCheck
Starting test: FrsSysVol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC1-NY01 passed test FrsSysVol
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... CM-DC1-NY01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
=Sites,CN=Configuration,DC=cmedia,DC=local
......................... CM-DC1-NY01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC CM-DC1-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC1-NY01.cmedia.local
* SPN found :LDAP/CM-DC1-NY01
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia
* SPN found :LDAP/a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/a29d12f1-2869-44bf-8e43-adf7ddf33865/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local
* SPN found :HOST/CM-DC1-NY01
* SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC1-NY01.cmedia.local/cmedia.local
......................... CM-DC1-NY01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC CM-DC1-NY01.
The forest is not ready for RODC. Will skip checking ERODC ACEs.
* Security Permissions Check for
DC=ForestDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=cmedia,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=cmedia,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=cmedia,DC=local
(Domain,Version 3)
......................... CM-DC1-NY01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\CM-DC1-NY01\netlogon
Verified share \\CM-DC1-NY01\sysvol
......................... CM-DC1-NY01 passed test NetLogons
Starting test: ObjectsReplicated
CM-DC1-NY01 is in domain DC=cmedia,DC=local
Checking for CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 3 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
Object is up-to-date on all servers.
......................... CM-DC1-NY01 passed test ObjectsReplicated
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test because /testdomain: was not entered
......................... CM-DC1-NY01 passed test OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... CM-DC1-NY01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 16109 to 1073741823
* CM-DC1-NY01.cmedia.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 4609 to 5108
* rIDPreviousAllocationPool is 4609 to 5108
* rIDNextRID: 4629
......................... CM-DC1-NY01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... CM-DC1-NY01 passed test Services
Starting test: SystemLog
* The System Event log test
A warning event occurred. EventID: 0x0000002F
Time Generated: 07/08/2014 13:19:14
Event String:
Time Provider NtpClient: No valid response has been received from manually configured peer 0.ca.pool.ntp.org
after 8 attempts to contact it. This peer will be discarded as a time source and NtpClient will attempt to discover a n
ew peer with this DNS name. The error was: The peer is unreachable.
Found no errors in "System" Event log in the last 60 minutes.
......................... CM-DC1-NY01 passed test SystemLog
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC1-NY01 passed test Topology
Starting test: VerifyEnterpriseReferences
......................... CM-DC1-NY01 passed test VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference) CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local
and backlink on
CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=CM-DC1-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on
CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
ia,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=CM-DC1-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
......................... CM-DC1-NY01 passed test VerifyReferences
Starting test: VerifyReplicas
......................... CM-DC1-NY01 passed test VerifyReplicas
Testing server: Default-First-Site-Name\CM-DC3-NY01
Starting test: Advertising
The DC CM-DC3-NY01 is advertising itself as a DC and having a DS.
The DC CM-DC3-NY01 is advertising as an LDAP server
The DC CM-DC3-NY01 is advertising as having a writeable directory
The DC CM-DC3-NY01 is advertising as a Key Distribution Center
The DC CM-DC3-NY01 is advertising as a time server
The DS CM-DC3-NY01 is advertising as a GC.
......................... CM-DC3-NY01 passed test Advertising
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
Checking machine account for DC CM-DC3-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC3-NY01.cmedia.local
* SPN found :LDAP/CM-DC3-NY01
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :LDAP/5e9d1971-39ca-484c-922d-411c2364c96e._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e9d1971-39ca-484c-922d-411c2364c96e/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local
* SPN found :HOST/CM-DC3-NY01
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC3-NY01.cmedia.local/cmedia.local
Checking for CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 2 servers
Object is up-to-date on all servers.
[CM-DC3-NY01] No security related replication errors were found on this DC! To target the connection to a
specific source DC use /ReplSource:<DC>.
......................... CM-DC3-NY01 passed test CheckSecurityError
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC3-NY01 passed test CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... CM-DC3-NY01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... CM-DC3-NY01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC3-NY01 passed test SysVolCheck
Starting test: FrsSysVol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC3-NY01 passed test FrsSysVol
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... CM-DC3-NY01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
=Sites,CN=Configuration,DC=cmedia,DC=local
......................... CM-DC3-NY01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC CM-DC3-NY01 on DC CM-DC3-NY01.
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC3-NY01.cmedia.local
* SPN found :LDAP/CM-DC3-NY01
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :LDAP/5e9d1971-39ca-484c-922d-411c2364c96e._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e9d1971-39ca-484c-922d-411c2364c96e/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local
* SPN found :HOST/CM-DC3-NY01
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC3-NY01.cmedia.local/cmedia.local
......................... CM-DC3-NY01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC CM-DC3-NY01.
The forest is not ready for RODC. Will skip checking ERODC ACEs.
* Security Permissions Check for
DC=ForestDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=cmedia,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=cmedia,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=cmedia,DC=local
(Domain,Version 3)
......................... CM-DC3-NY01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\CM-DC3-NY01\netlogon
Verified share \\CM-DC3-NY01\sysvol
......................... CM-DC3-NY01 passed test NetLogons
Starting test: ObjectsReplicated
CM-DC3-NY01 is in domain DC=cmedia,DC=local
Checking for CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 3 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
Object is up-to-date on all servers.
......................... CM-DC3-NY01 passed test ObjectsReplicated
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test because /testdomain: was not entered
......................... CM-DC3-NY01 passed test OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... CM-DC3-NY01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 16109 to 1073741823
* CM-DC1-NY01.cmedia.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 15109 to 15608
* rIDPreviousAllocationPool is 15109 to 15608
* rIDNextRID: 15110
......................... CM-DC3-NY01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... CM-DC3-NY01 passed test Services
Starting test: SystemLog
* The System Event log test
Found no errors in "System" Event log in the last 60 minutes.
......................... CM-DC3-NY01 passed test SystemLog
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC3-NY01 passed test Topology
Starting test: VerifyEnterpriseReferences
......................... CM-DC3-NY01 passed test VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference) CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local
and backlink on
CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=CM-DC3-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on
CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
ia,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=CM-DC3-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
......................... CM-DC3-NY01 passed test VerifyReferences
Starting test: VerifyReplicas
......................... CM-DC3-NY01 passed test VerifyReplicas
Testing server: Default-First-Site-Name\CM-DC4-NY01
Starting test: Advertising
The DC CM-DC4-NY01 is advertising itself as a DC and having a DS.
The DC CM-DC4-NY01 is advertising as an LDAP server
The DC CM-DC4-NY01 is advertising as having a writeable directory
The DC CM-DC4-NY01 is advertising as a Key Distribution Center
The DC CM-DC4-NY01 is advertising as a time server
The DS CM-DC4-NY01 is advertising as a GC.
......................... CM-DC4-NY01 passed test Advertising
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
Checking machine account for DC CM-DC4-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC4-NY01.cmedia.local
* SPN found :LDAP/CM-DC4-NY01
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :LDAP/37830012-1f10-43c9-a0ff-2a0e8a912187._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/37830012-1f10-43c9-a0ff-2a0e8a912187/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local
* SPN found :HOST/CM-DC4-NY01
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC4-NY01.cmedia.local/cmedia.local
Checking for CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 2 servers
Object is up-to-date on all servers.
[CM-DC4-NY01] No security related replication errors were found on this DC! To target the connection to a
specific source DC use /ReplSource:<DC>.
......................... CM-DC4-NY01 passed test CheckSecurityError
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC4-NY01 passed test CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... CM-DC4-NY01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... CM-DC4-NY01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC4-NY01 passed test SysVolCheck
Starting test: FrsSysVol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC4-NY01 passed test FrsSysVol
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... CM-DC4-NY01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
=Sites,CN=Configuration,DC=cmedia,DC=local
......................... CM-DC4-NY01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC CM-DC4-NY01 on DC CM-DC4-NY01.
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC4-NY01.cmedia.local
* SPN found :LDAP/CM-DC4-NY01
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :LDAP/37830012-1f10-43c9-a0ff-2a0e8a912187._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/37830012-1f10-43c9-a0ff-2a0e8a912187/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local
* SPN found :HOST/CM-DC4-NY01
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC4-NY01.cmedia.local/cmedia.local
......................... CM-DC4-NY01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC CM-DC4-NY01.
The forest is not ready for RODC. Will skip checking ERODC ACEs.
* Security Permissions Check for
DC=ForestDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=cmedia,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=cmedia,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=cmedia,DC=local
(Domain,Version 3)
......................... CM-DC4-NY01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\CM-DC4-NY01\netlogon
Verified share \\CM-DC4-NY01\sysvol
......................... CM-DC4-NY01 passed test NetLogons
Starting test: ObjectsReplicated
CM-DC4-NY01 is in domain DC=cmedia,DC=local
Checking for CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 3 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
Object is up-to-date on all servers.
......................... CM-DC4-NY01 passed test ObjectsReplicated
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test because /testdomain: was not entered
......................... CM-DC4-NY01 passed test OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... CM-DC4-NY01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 16109 to 1073741823
* CM-DC1-NY01.cmedia.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 15609 to 16108
* rIDPreviousAllocationPool is 15609 to 16108
* rIDNextRID: 15609
......................... CM-DC4-NY01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... CM-DC4-NY01 passed test Services
Starting test: SystemLog
* The System Event log test
Found no errors in "System" Event log in the last 60 minutes.
......................... CM-DC4-NY01 passed test SystemLog
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC4-NY01 passed test Topology
Starting test: VerifyEnterpriseReferences
......................... CM-DC4-NY01 passed test VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference) CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local
and backlink on
CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=CM-DC4-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on
CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
ia,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=CM-DC4-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
......................... CM-DC4-NY01 passed test VerifyReferences
Starting test: VerifyReplicas
......................... CM-DC4-NY01 passed test VerifyReplicas -
In looking to fix a problem that many are having with getting their Jabber servers working with google, I believe I have found that resolver seems to ignore the existence of SRV records and simply return A records. Has anyone else seen this problem.
In CUCM documentation I see the next:
Enter the address of the IM and Presence service in one of the following forms:
Hostname
IP address
DNS SRV
Allowed values: Allowed characters include alphanumeric (a-zA-Z0-9), period (.), backslash (\), dash (-), and underscore (_)
So the question is - what the format of dns rsv record in uc profile ? -
Apache and cluster and failover
Hi All,
I have a quick question. I am running 2 WLS 5.1 sp6 app servers
in clustered mode (on solaris 7) using Apache 1.3.12 (also Solaris),
and the weblogic proxy. Everything is working fine, and failover
works correctly if one of the servers crashes.
My problem is when the primary server for a session is correctly
shut down. In my environment failover does not work in this situation.
In the case that the server is shut down correctly, should failover
occur? I would think that all sessions that are on the server
being shut down would be transferred to the secondary server...
is this a bug in weblogic? Or am I just wrong?
Thanks again
"Cameron Purdy" <[email protected]> wrote:
>Some OS's combined with some WL releases will failover
>on graceful
>shut-down. Sometimes you just have to kill -9 or close
>the port to get
>failover to work.
>
>--That is very good information. Thank you. I do see the failover
working correctly when I have 2 NT WLS app servers and a Solaris
Apache web server. The problem occurs when I have 2 Solaris app
servers and the Solaris Apache web server. does this sound familiar?
>Cameron Purdy
>Tangosol, Inc.
>http://www.tangosol.com
>+1.617.623.5782
>WebLogic Consulting Available
>
>
>"Nick Barbato" <[email protected]> wrote in message
>news:[email protected]...
>>
>> Hi All,
>>
>> I have a quick question. I am running 2 WLS 5.1 sp6
>app servers
>> in clustered mode (on solaris 7) using Apache 1.3.12
>(also Solaris),
>> and the weblogic proxy. Everything is working fine,
>and failover
>> works correctly if one of the servers crashes.
>>
>> My problem is when the primary server for a session
>is correctly
>> shut down. In my environment failover does not work
>in this situation.
>> In the case that the server is shut down correctly,
>should failover
>> occur? I would think that all sessions that are on
>the server
>> being shut down would be transferred to the secondary
>server...
>> is this a bug in weblogic? Or am I just wrong?
>>
>> Thanks again
>
>
-
my safari lion does not open and keeps quiting unexpected. Haven`t been able to use it for weeks now. I have disabled other applicancies like printers but it still does not open. Any body with an ideal of what to end this headache?
Process:
Safari [4546]
Path:
/Applications/Safari.app/Contents/MacOS/Safari
Identifier:
com.apple.Safari
Version:
5.1.6 (7534.56.5)
Build Info:
WebBrowser-7534056005000000~6
Code Type:
X86-64 (Native)
Parent Process: launchd [139]
Date/Time:
2012-08-27 22:20:55.769 +0200
OS Version:
Mac OS X 10.7.4 (11E53)
Report Version: 9
Interval Since Last Report:
121033 sec
Crashes Since Last Report:
17
Per-App Interval Since Last Report: 40 sec
Per-App Crashes Since Last Report: 17
Anonymous UUID:
4B16E567-6824-4CB2-B119-3E3278616F3F
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
objc[4546]: garbage collection is OFF
*** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Invalid parameter not satisfying: (index >= 0) && (index < [_itemArray count])'
*** First throw call stack:
0 CoreFoundation
0x00007fff8b9f9f56 __exceptionPreprocess + 198
1 libobjc.A.dylib
0x00007fff87941d5e objc_exception_throw + 43
2 CoreFoundation
0x00007fff8b9f9d8a +[NSException raise:format:arguments:] + 106
3 Foundation
0x00007fff8cccf71f -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 169
4 AppKit
0x00007fff8daf9cdf -[NSMenu itemAtIndex:] + 165
5 AppKit
0x00007fff8daf9e38 -[NSMenu removeItemAtIndex:] + 63
6 Safari
0x000000010778ac2e -[AppController awakeFromNib] + 387
7 CoreFoundation
0x00007fff8b9f0fb1 -[NSObject performSelector:] + 49
8 CoreFoundation
0x00007fff8b9f0f32 -[NSSet makeObjectsPerformSelector:] + 274
9 AppKit
0x00007fff8dae19ff -[NSIBObjectData nibInstantiateWithOwner:topLevelObjects:] + 1245
10 AppKit
0x00007fff8dad7f73 loadNib + 322
11 AppKit
0x00007fff8dad7470 +[NSBundle(NSNibLoading) _loadNibFile:nameTable:withZone:ownerBundle:] + 217
12 AppKit
0x00007fff8dad738b +[NSBundle(NSNibLoading) loadNibFile:externalNameTable:withZone:] + 141
13 AppKit
0x00007fff8dad72ce +[NSBundle(NSNibLoading) loadNibNamed:owner:] + 364
14 AppKit
0x00007fff8dd4806f NSApplicationMain + 398
15 Safari
0x000000010798d806 SafariMain + 166
16 Safari
0x000000010777af24 Safari + 3876
terminate called throwing an exception
abort() called
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib
0x00007fff8c803ce2 __pthread_kill + 10
1 libsystem_c.dylib
0x00007fff8871b7d2 pthread_kill + 95
2 libsystem_c.dylib
0x00007fff8870ca7a abort + 143
3 libc++abi.dylib
0x00007fff901457bc abort_message + 214
4 libc++abi.dylib
0x00007fff90142fcf default_terminate() + 28
5 libobjc.A.dylib
0x00007fff879421b9 _objc_terminate + 94
6 libc++abi.dylib
0x00007fff90143001 safe_handler_caller(void (*)()) + 11
7 libc++abi.dylib
0x00007fff9014305c std::terminate() + 16
8 libc++abi.dylib
0x00007fff90144152 __cxa_throw + 114
9 libobjc.A.dylib
0x00007fff87941e7a objc_exception_throw + 327
10 com.apple.CoreFoundation
0x00007fff8b9f9d8a +[NSException raise:format:arguments:] + 106
11 com.apple.Foundation
0x00007fff8cccf71f -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 169
12 com.apple.AppKit
0x00007fff8daf9cdf -[NSMenu itemAtIndex:] + 165
13 com.apple.AppKit
0x00007fff8daf9e38 -[NSMenu removeItemAtIndex:] + 63
14 com.apple.Safari.framework
0x000000010778ac2e -[AppController awakeFromNib] + 387
15 com.apple.CoreFoundation
0x00007fff8b9f0fb1 -[NSObject performSelector:] + 49
16 com.apple.CoreFoundation
0x00007fff8b9f0f32 -[NSSet makeObjectsPerformSelector:] + 274
17 com.apple.AppKit
0x00007fff8dae19ff -[NSIBObjectData nibInstantiateWithOwner:topLevelObjects:] + 1245
18 com.apple.AppKit
0x00007fff8dad7f73 loadNib + 322
19 com.apple.AppKit
0x00007fff8dad7470 +[NSBundle(NSNibLoading) _loadNibFile:nameTable:withZone:ownerBundle:] + 217
20 com.apple.AppKit
0x00007fff8dad738b +[NSBundle(NSNibLoading) loadNibFile:externalNameTable:withZone:] + 141
21 com.apple.AppKit
0x00007fff8dad72ce +[NSBundle(NSNibLoading) loadNibNamed:owner:] + 364
22 com.apple.AppKit
0x00007fff8dd4806f NSApplicationMain + 398
23 com.apple.Safari.framework
0x000000010798d806 SafariMain + 166
24 com.apple.Safari
0x000000010777af24 0x10777a000 + 3876
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib
0x00007fff8c8047e6 kevent + 10
1 libdispatch.dylib
0x00007fff8a42178a _dispatch_mgr_invoke + 923
2 libdispatch.dylib
0x00007fff8a42031a _dispatch_mgr_thread + 54
Thread 2:
0 libsystem_kernel.dylib
0x00007fff8c804192 __workq_kernreturn + 10
1 libsystem_c.dylib
0x00007fff8871b594 _pthread_wqthread + 758
2 libsystem_c.dylib
0x00007fff8871cb85 start_wqthread + 13
Thread 3:: Dispatch queue: com.apple.CFURLCACHE_work_queue
0 libsystem_kernel.dylib
0x00007fff8c804ab6 pwrite + 10
1 libsqlite3.dylib
0x00007fff8b8b3d73 unixWrite + 83
2 libsqlite3.dylib
0x00007fff8b8aeaf3 pager_write + 1667
3 libsqlite3.dylib
0x00007fff8b8ae455 sqlite3PagerWrite + 709
4 libsqlite3.dylib
0x00007fff8b887c36 sqlite3VdbeExec + 9606
5 libsqlite3.dylib
0x00007fff8b884a5b sqlite3_step + 1883
6 libsqlite3.dylib
0x00007fff8b847fb5 sqlite3_exec + 533
7 com.apple.CFNetwork
0x00007fff923a466c __CFURLCache::PostDatabaseOpenPragmaExecute() + 48
8 com.apple.CFNetwork
0x00007fff923a4542 __CFURLCache::OpenDatabase() + 196
9 com.apple.CFNetwork
0x00007fff923a4040 ProcessCacheTasks(__CFURLCache*, bool) + 265
10 com.apple.CFNetwork
0x00007fff923a3a72 _ZL24_CFURLCacheTimerCallbackPv + 662
11 libdispatch.dylib
0x00007fff8a41fa86 _dispatch_call_block_and_release + 18
12 libdispatch.dylib
0x00007fff8a4212d6 _dispatch_queue_drain + 264
13 libdispatch.dylib
0x00007fff8a421132 _dispatch_queue_invoke + 54
14 libdispatch.dylib
0x00007fff8a42092c _dispatch_worker_thread2 + 198
15 libsystem_c.dylib
0x00007fff8871b3da _pthread_wqthread + 316
16 libsystem_c.dylib
0x00007fff8871cb85 start_wqthread + 13
Thread 4:: WebCore: IconDatabase
0 libsystem_kernel.dylib
0x00007fff8c804a8e pread + 10
1 libsqlite3.dylib
0x00007fff8b845ce5 unixRead + 69
2 libsqlite3.dylib
0x00007fff8b8674f6 readDbPage + 102
3 libsqlite3.dylib
0x00007fff8b865c9b sqlite3PagerAcquire + 315
4 libsqlite3.dylib
0x00007fff8b8ceda5 accessPayload + 693
5 libsqlite3.dylib
0x00007fff8b8a3645 sqlite3VdbeMemFromBtree + 485
6 libsqlite3.dylib
0x00007fff8b892813 sqlite3VdbeExec + 53603
7 libsqlite3.dylib
0x00007fff8b884a5b sqlite3_step + 1883
8 com.apple.WebCore
0x000000010882ceff WebCore::SQLiteStatement::step() + 63
9 com.apple.WebCore
0x000000010882d6cc WebCore::IconDatabase::performURLImport() + 908
10 com.apple.WebCore
0x000000010882bd3b WebCore::IconDatabase::iconDatabaseSyncThread() + 475
11 com.apple.JavaScriptCore
0x000000010816811f _ZN3WTFL19wtfThreadEntryPointEPv + 15
12 libsystem_c.dylib
0x00007fff887198bf _pthread_start + 335
13 libsystem_c.dylib
0x00007fff8871cb75 thread_start + 13
Thread 5:: CoreAnimation render server
0 libsystem_kernel.dylib
0x00007fff8c80267a mach_msg_trap + 10
1 libsystem_kernel.dylib
0x00007fff8c801d71 mach_msg + 73
2 com.apple.QuartzCore
0x00007fff8f9a22d9 CA::Render::Server::server_thread(void*) + 184
3 com.apple.QuartzCore
0x00007fff8f9a2219 thread_fun + 24
4 libsystem_c.dylib
0x00007fff887198bf _pthread_start + 335
5 libsystem_c.dylib
0x00007fff8871cb75 thread_start + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x0000000000000000 rbx: 0x0000000000000006 rcx: 0x00007fff67378408 rdx: 0x0000000000000000
rdi: 0x000000000000060b rsi: 0x0000000000000006 rbp: 0x00007fff67378430 rsp: 0x00007fff67378408
r8: 0x00007fff75b04fb8 r9: 0x00007fff67377e98 r10: 0x00007fff8c803d0a r11: 0xffffff80002da8d0
r12: 0x00007fc73ae56720 r13: 0x000000000000000d r14: 0x00007fff75b07960 r15: 0x00007fff67378580
rip: 0x00007fff8c803ce2 rfl: 0x0000000000000246 cr2: 0x000000010b38a000
Logical CPU: 0
Binary Images:
0x10777a000 -
0x10777afff com.apple.Safari (5.1.6 - 7534.56.5) <C1A60C3B-9DA6-3FE7-87BA-6B09016A39A9> /Applications/Safari.app/Contents/MacOS/Safari
0x10777e000 -
0x107c18ff7 com.apple.Safari.framework (7536 - 7536.25) <C95F0D4E-6984-3D2F-B0BA-5D12A164EAC8> /System/Library/StagedFrameworks/Safari/Safari.framework/Safari
0x107f35000 -
0x1081c4fff com.apple.JavaScriptCore (7536 - 7536.24) <C613502E-BC98-3269-A25C-4BDB2D87590B> /System/Library/StagedFrameworks/Safari/JavaScriptCore.framework/JavaScriptCore
0x108277000 -
0x1083f9ff7 com.apple.WebKit (7536 - 7536.25) <8D171955-A1CA-31AA-B701-B9D4F760B10B> /System/Library/StagedFrameworks/Safari/WebKit.framework/WebKit
0x1084eb000 -
0x1086c4fff com.apple.WebKit2 (7536 - 7536.25) <15991DAF-D0C9-3D65-A96B-AF7428ADCC4E> /System/Library/StagedFrameworks/Safari/WebKit2.framework/WebKit2
0x108828000 -
0x1097cdff7 com.apple.WebCore (7536 - 7536.24) <F2C26660-05D7-34A7-9158-9C3D21BEB32F> /System/Library/StagedFrameworks/Safari/WebCore.framework/WebCore
0x7fff6737a000 -
0x7fff673aebaf dyld (195.6 - ???) <C58DAD8A-4B00-3676-8637-93D6FDE73147> /usr/lib/dyld
0x7fff8549e000 -
0x7fff854ecfff libauto.dylib (??? - ???) <D8AC8458-DDD0-3939-8B96-B6CED81613EF> /usr/lib/libauto.dylib
0x7fff854ed000 -
0x7fff854f8fff com.apple.CommonAuth (2.2 - 2.0) <77E6F0D0-85B6-30B5-B99C-F57104DD2EBA> /System/Library/PrivateFrameworks/CommonAuth.framework/Versions/A/CommonAuth
0x7fff854f9000 -
0x7fff85559fff libvDSP.dylib (325.4.0 - compatibility 1.0.0) <3A7521E6-5510-3FA7-AB65-79693A7A5839> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x7fff8555a000 -
0x7fff855c5ff7 com.apple.framework.IOKit (2.0 - ???) <6C604894-7F61-3130-8499-20791D14577F> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x7fff855c6000 -
0x7fff8563cfff com.apple.CoreSymbolication (2.2 - 73.2) <126415E3-3A35-315B-B4B7-507CDBED0D58> /System/Library/PrivateFrameworks/CoreSymbolication.framework/Versions/A/CoreSy mbolication
0x7fff8563d000 -
0x7fff856f0ff7 com.apple.CoreText (220.20.0 - ???) <0E979362-15E4-3955-BF54-B5961361D1CC> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
0x7fff856f1000 -
0x7fff85703ff7 libz.1.dylib (1.2.5 - compatibility 1.0.0) <30CBEF15-4978-3DED-8629-7109880A19D4> /usr/lib/libz.1.dylib
0x7fff85d92000 -
0x7fff8629bff7 com.apple.RawCamera.bundle (3.14.0 - 646) <75A96BFC-1832-808B-F430-C4C9379C5A98> /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera
0x7fff8629c000 -
0x7fff862eeff7 libGLU.dylib (??? - ???) <E2EF0336-3A5F-3532-AEB0-6CCF04851B72> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
0x7fff87703000 -
0x7fff8777eff7 com.apple.print.framework.PrintCore (7.1 - 366.3) <C5F39A82-0E77-3AD6-906A-20DD2EE8D374> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x7fff87905000 -
0x7fff87929fff com.apple.Kerberos (1.0 - 1) <1F826BCE-DA8F-381D-9C4C-A36AA0EA1CB9> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
0x7fff8792a000 -
0x7fff8792afff com.apple.Cocoa (6.6 - ???) <7EC4D759-B2A6-3A99-AC75-809FED1500C6> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x7fff8792b000 -
0x7fff87a0fe5f libobjc.A.dylib (228.0.0 - compatibility 1.0.0) <871E688B-CF57-3BC7-80D6-F6476DFF109B> /usr/lib/libobjc.A.dylib
0x7fff87a10000 -
0x7fff87a52fff com.apple.corelocation (330.12 - 330.12) <CFDF7694-382A-30A8-8347-505BA0CAF312> /System/Library/Frameworks/CoreLocation.framework/Versions/A/CoreLocation
0x7fff87a53000 -
0x7fff87ae9ff7 libvMisc.dylib (325.4.0 - compatibility 1.0.0) <642D8D54-F9F5-3FBB-A96C-EEFE94C6278B> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x7fff87e99000 -
0x7fff87ea7ff7 libkxld.dylib (??? - ???) <C2FC894F-3716-32C3-967E-6AD5E2697045> /usr/lib/system/libkxld.dylib
0x7fff87ea8000 -
0x7fff87eadfff libcache.dylib (47.0.0 - compatibility 1.0.0) <1571C3AB-BCB2-38CD-B3B2-C5FC3F927C6A> /usr/lib/system/libcache.dylib
0x7fff87ee3000 -
0x7fff87f10fe7 libSystem.B.dylib (159.1.0 - compatibility 1.0.0) <DA79E5BA-BBA3-3768-AAD8-B34BA877EF03> /usr/lib/libSystem.B.dylib
0x7fff8809d000 -
0x7fff880a4ff7 com.apple.CommerceCore (1.0 - 17) <3894FE48-EDCE-30E9-9796-E2F959D92704> /System/Library/PrivateFrameworks/CommerceKit.framework/Versions/A/Frameworks/C ommerceCore.framework/Versions/A/CommerceCore
0x7fff880ad000 -
0x7fff880affff libCVMSPluginSupport.dylib (??? - ???) <1C73D331-6F6C-3872-A011-1C41FBF49F2A> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCVMSPluginS upport.dylib
0x7fff880b0000 -
0x7fff88119fff com.apple.coreui (1.2.2 - 165.10) <F427BF39-3E01-3DC6-A63D-BFC50FE6C72E> /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
0x7fff8843d000 -
0x7fff88440fff libCoreVMClient.dylib (??? - ???) <934D0D11-C34F-3C06-A352-21BB8FFE9774> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCoreVMClien t.dylib
0x7fff88454000 -
0x7fff88466ff7 libbsm.0.dylib (??? - ???) <349BB16F-75FA-363F-8D98-7A9C3FA90A0D> /usr/lib/libbsm.0.dylib
0x7fff88467000 -
0x7fff8849aff7 com.apple.GSS (2.2 - 2.0) <971395D0-B9D0-3FDE-B23F-6F9D0A2FB95F> /System/Library/Frameworks/GSS.framework/Versions/A/GSS
0x7fff885ad000 -
0x7fff885e8fff libsystem_info.dylib (??? - ???) <35F90252-2AE1-32C5-8D34-782C614D9639> /usr/lib/system/libsystem_info.dylib
0x7fff886cb000 -
0x7fff887a8fef libsystem_c.dylib (763.13.0 - compatibility 1.0.0) <41B43515-2806-3FBC-ACF1-A16F35B7E290> /usr/lib/system/libsystem_c.dylib
0x7fff887a9000 -
0x7fff88819fff com.apple.datadetectorscore (3.0 - 179.4) <9C01D16F-75A9-3BDD-B91A-F0F32261A2E7> /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDe tectorsCore
0x7fff8881a000 -
0x7fff8885cff7 libcommonCrypto.dylib (55010.0.0 - compatibility 1.0.0) <BB770C22-8C57-365A-8716-4A3C36AE7BFB> /usr/lib/system/libcommonCrypto.dylib
0x7fff88bb1000 -
0x7fff88bb1fff com.apple.vecLib (3.7 - vecLib 3.7) <9A58105C-B36E-35B5-812C-4ED693F2618F> /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x7fff88bb2000 -
0x7fff88bc9fff com.apple.MultitouchSupport.framework (231.4 - 231.4) <10A978D1-8781-33F0-BE45-60C9171F7278> /System/Library/PrivateFrameworks/MultitouchSupport.framework/Versions/A/Multit ouchSupport
0x7fff88bdb000 -
0x7fff88e05fe7 com.apple.CoreData (104.1 - 358.14) <6BB64605-8DA7-337D-A2AB-A3346A421CBD> /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
0x7fff88e06000 -
0x7fff897a3c9f com.apple.CoreGraphics (1.600.0 - ???) <1DB9C92C-DFA8-36ED-B513-998134462148> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x7fff89bf1000 -
0x7fff89bfaff7 libsystem_notify.dylib (80.1.0 - compatibility 1.0.0) <A4D651E3-D1C6-3934-AD49-7A104FD14596> /usr/lib/system/libsystem_notify.dylib
0x7fff8a02b000 -
0x7fff8a060fff com.apple.securityinterface (5.0 - 55022.4) <09EC371E-0B6E-3849-A6C9-F8E9DB17BBCD> /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
0x7fff8a061000 -
0x7fff8a0b9fff libTIFF.dylib (??? - ???) <A0FF68DE-2935-30E7-B61C-4D9D70E14AD0> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x7fff8a0ba000 -
0x7fff8a0fbfff com.apple.QD (3.40 - ???) <47674D2C-BE88-388E-B1B0-03F08BFFE5FD> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x7fff8a0fc000 -
0x7fff8a1c3ff7 com.apple.ColorSync (4.7.4 - 4.7.4) <590AFCDA-F10E-31FE-9B01-DA5FFE74C2BB> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x7fff8a1d3000 -
0x7fff8a1d9fff libmacho.dylib (800.0.0 - compatibility 1.0.0) <165514D7-1BFA-38EF-A151-676DCD21FB64> /usr/lib/system/libmacho.dylib
0x7fff8a1da000 -
0x7fff8a1dafff com.apple.Accelerate (1.7 - Accelerate 1.7) <82DDF6F5-FBC3-323D-B71D-CF7ABC5CF568> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x7fff8a26a000 -
0x7fff8a29aff7 com.apple.DictionaryServices (1.2.1 - 158.2) <3FC86118-7553-38F7-8916-B329D2E94476> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x7fff8a302000 -
0x7fff8a356fff libFontRegistry.dylib (??? - ???) <822DD341-C735-36C9-9521-E8E98807D09D> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontRegistry.dylib
0x7fff8a357000 -
0x7fff8a357fff com.apple.audio.units.AudioUnit (1.7.2 - 1.7.2) <04C10813-CCE5-3333-8C72-E8E35E417B3B> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x7fff8a3f5000 -
0x7fff8a41dfff com.apple.PerformanceAnalysis (1.11 - 11) <8D4C6382-DD92-37A2-BCFC-E89951320848> /System/Library/PrivateFrameworks/PerformanceAnalysis.framework/Versions/A/Perf ormanceAnalysis
0x7fff8a41e000 -
0x7fff8a42cfff libdispatch.dylib (187.9.0 - compatibility 1.0.0) <1D5BE322-A9B9-3BCE-8FAC-076FB07CF54A> /usr/lib/system/libdispatch.dylib
0x7fff8acc3000 -
0x7fff8acd6ff7 libCRFSuite.dylib (??? - ???) <0B76941F-218E-30C8-B6DE-E15919F8DBEB> /usr/lib/libCRFSuite.dylib
0x7fff8acd7000 -
0x7fff8ad3fff7 com.apple.audio.CoreAudio (4.0.2 - 4.0.2) <C6703B2E-62F2-37C4-A4DE-28AF9C81CB44> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x7fff8ad40000 -
0x7fff8ad40fff com.apple.Carbon (153 - 153) <16EA5662-5C2C-3267-B419-66669AE536D7> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x7fff8ad41000 -
0x7fff8b16efff libLAPACK.dylib (??? - ???) <4F2E1055-2207-340B-BB45-E4F16171EE0D> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x7fff8b16f000 -
0x7fff8b1a9fe7 com.apple.DebugSymbols (2.1 - 87) <ED2B177C-4146-3715-91DF-D99A8ED5449A> /System/Library/PrivateFrameworks/DebugSymbols.framework/Versions/A/DebugSymbol s
0x7fff8b1ab000 -
0x7fff8b21efff libstdc++.6.dylib (52.0.0 - compatibility 7.0.0) <6BDD43E4-A4B1-379E-9ED5-8C713653DFF2> /usr/lib/libstdc++.6.dylib
0x7fff8b83d000 -
0x7fff8b944fe7 libsqlite3.dylib (9.6.0 - compatibility 9.0.0) <EE02BB01-64C9-304D-9719-A35F5CD6D04C> /usr/lib/libsqlite3.dylib
0x7fff8b945000 -
0x7fff8b955ff7 com.apple.opengl (1.7.7 - 1.7.7) <0CA11278-746C-353A-923B-BCC0047190C3> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x7fff8b956000 -
0x7fff8bb2aff7 com.apple.CoreFoundation (6.7.2 - 635.21) <62A3402E-A4E7-391F-AD20-1EF20236CE1B> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff8bb2b000 -
0x7fff8bc38fff libJP2.dylib (??? - ???) <5BE8CFA7-00C2-3BDE-BC20-5FF6DC18B415> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJP2.dylib
0x7fff8bc62000 -
0x7fff8bc65fff libRadiance.dylib (??? - ???) <CD89D70D-F177-3BAE-8A26-644EA7D5E28E> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
0x7fff8bce3000 -
0x7fff8bce5fff libquarantine.dylib (36.6.0 - compatibility 1.0.0) <0EBF714B-4B69-3E1F-9A7D-6BBC2AACB310> /usr/lib/system/libquarantine.dylib
0x7fff8bd14000 -
0x7fff8bd19fff libpam.2.dylib (3.0.0 - compatibility 3.0.0) <D952F17B-200A-3A23-B9B2-7C1F7AC19189> /usr/lib/libpam.2.dylib
0x7fff8bdb9000 -
0x7fff8be05ff7 com.apple.SystemConfiguration (1.11.3 - 1.11) <0A7F1982-B4EA-3424-A0C7-FE46C6224F03> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x7fff8be89000 -
0x7fff8be8aff7 libsystem_blocks.dylib (53.0.0 - compatibility 1.0.0) <8BCA214A-8992-34B2-A8B9-B74DEACA1869> /usr/lib/system/libsystem_blocks.dylib
0x7fff8be8b000 -
0x7fff8bf25ff7 com.apple.SearchKit (1.4.0 - 1.4.0) <4E70C394-773E-3A4B-A93C-59A88ABA9509> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x7fff8bf75000 -
0x7fff8bf7bff7 libunwind.dylib (30.0.0 - compatibility 1.0.0) <1E9C6C8C-CBE8-3F4B-A5B5-E03E3AB53231> /usr/lib/system/libunwind.dylib
0x7fff8bf84000 -
0x7fff8c025ff7 com.apple.LaunchServices (480.33 - 480.33) <45EF2044-3396-3910-9B5B-C8F7777D5F56> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x7fff8c026000 -
0x7fff8c02afff libmathCommon.A.dylib (2026.0.0 - compatibility 1.0.0) <FF83AFF7-42B2-306E-90AF-D539C51A4542> /usr/lib/system/libmathCommon.A.dylib
0x7fff8c097000 -
0x7fff8c0c2ff7 com.apple.CoreServicesInternal (113.17 - 113.17) <B1DF81C3-9C23-3BAE-9DE8-21EAFEEB97B8> /System/Library/PrivateFrameworks/CoreServicesInternal.framework/Versions/A/Cor eServicesInternal
0x7fff8c0c3000 -
0x7fff8c0ecfff libJPEG.dylib (??? - ???) <64D079F9-256A-323B-A837-84628B172F21> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x7fff8c0ed000 -
0x7fff8c1f2fff libFontParser.dylib (??? - ???) <759645F2-8CB1-358C-AF41-BA3797CD0F60> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontParser.dylib
0x7fff8c208000 -
0x7fff8c235ff7 com.apple.opencl (1.50.69 - 1.50.69) <57939F7D-3626-30E2-883D-8A7CCB3F8763> /System/Library/Frameworks/OpenCL.framework/Versions/A/OpenCL
0x7fff8c243000 -
0x7fff8c28cff7 com.apple.framework.CoreWLAN (2.1.2 - 212.2) <5E421E2D-50EA-340E-A5EE-C848DD6FC34F> /System/Library/Frameworks/CoreWLAN.framework/Versions/A/CoreWLAN
0x7fff8c306000 -
0x7fff8c3abfff com.apple.ink.framework (1.4 - 110) <F93B76B3-E57C-3805-B20D-03717A3F91DD> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x7fff8c3ac000 -
0x7fff8c3b9fff com.apple.CrashReporterSupport (10.7.4 - 352) <9C16B49C-CF02-38F9-A7CD-969C140D3961> /System/Library/PrivateFrameworks/CrashReporterSupport.framework/Versions/A/Cra shReporterSupport
0x7fff8c3ba000 -
0x7fff8c4affff libiconv.2.dylib (7.0.0 - compatibility 7.0.0) <5C40E880-0706-378F-B864-3C2BD922D926> /usr/lib/libiconv.2.dylib
0x7fff8c4b0000 -
0x7fff8c535ff7 com.apple.Heimdal (2.2 - 2.0) <FF0BD9A4-6FB0-31E3-ABFB-563FBBEC45FC> /System/Library/PrivateFrameworks/Heimdal.framework/Versions/A/Heimdal
0x7fff8c539000 -
0x7fff8c5bcfef com.apple.Metadata (10.7.0 - 627.32) <38735923-2EB5-3133-BE36-BDD65A7E47DB> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x7fff8c5bd000 -
0x7fff8c5fcfff com.apple.AE (527.7 - 527.7) <B82F7ABC-AC8B-3507-B029-969DD5CA813D> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x7fff8c5fd000 -
0x7fff8c612fff com.apple.speech.synthesis.framework (4.0.74 - 4.0.74) <C061ECBB-7061-3A43-8A18-90633F943295> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x7fff8c613000 -
0x7fff8c715fff libxml2.2.dylib (10.3.0 - compatibility 10.0.0) <AFBB22B7-07AE-3F2E-B88C-70BEEBFB8A86> /usr/lib/libxml2.2.dylib
0x7fff8c716000 -
0x7fff8c725ff7 libxar-nossl.dylib (??? - ???) <A6ABBFB9-E4ED-38AD-BBBB-F9958B9CEFB5> /usr/lib/libxar-nossl.dylib
0x7fff8c726000 -
0x7fff8c79cfff libc++.1.dylib (28.1.0 - compatibility 1.0.0) <DA22E4D6-7F20-3BEA-9B89-2FBA735C2EE1> /usr/lib/libc++.1.dylib
0x7fff8c79d000 -
0x7fff8c79dfff com.apple.Accelerate.vecLib (3.7 - vecLib 3.7) <C06A140F-6114-3B8B-B080-E509303145B8> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x7fff8c79e000 -
0x7fff8c7bbfff libxpc.dylib (77.19.0 - compatibility 1.0.0) <9F57891B-D7EF-3050-BEDD-21E7C6668248> /usr/lib/system/libxpc.dylib
0x7fff8c7bc000 -
0x7fff8c7c3fff com.apple.NetFS (4.0 - 4.0) <433EEE54-E383-3505-9154-45B909FD3AF0> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
0x7fff8c7c4000 -
0x7fff8c7c7ff7 com.apple.securityhi (4.0 - 1) <D0ABB03B-CEF9-39E0-A139-AA9484DBBC07> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
0x7fff8c7c8000 -
0x7fff8c7ecfff com.apple.RemoteViewServices (1.4 - 44.1) <EA3837DF-A3A3-37FF-AE11-D50048D5F21A> /System/Library/PrivateFrameworks/RemoteViewServices.framework/Versions/A/Remot eViewServices
0x7fff8c7ed000 -
0x7fff8c80dfff libsystem_kernel.dylib (1699.26.8 - compatibility 1.0.0) <1DDC0B0F-DB2A-34D6-895D-E5B2B5618946> /usr/lib/system/libsystem_kernel.dylib
0x7fff8c80e000 -
0x7fff8c813fff com.apple.OpenDirectory (10.7 - 146) <7960A302-F9AC-3F72-838E-3A382032DCA6> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/OpenDirectory
0x7fff8c882000 -
0x7fff8c8d6ff7 com.apple.ScalableUserInterface (1.0 - 1) <33563775-C662-313D-B7FA-3D575A9F3D41> /System/Library/Frameworks/QuartzCore.framework/Versions/A/Frameworks/ScalableU serInterface.framework/Versions/A/ScalableUserInterface
0x7fff8c903000 -
0x7fff8c95fff7 com.apple.HIServices (1.21 - ???) <9645CFA8-63BE-3A0D-A636-56D9827E6C8C> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x7fff8cbb9000 -
0x7fff8cbbefff libcompiler_rt.dylib (6.0.0 - compatibility 1.0.0) <98ECD5F6-E85C-32A5-98CD-8911230CB66A> /usr/lib/system/libcompiler_rt.dylib
0x7fff8cc04000 -
0x7fff8cf1dfff com.apple.Foundation (6.7.2 - 833.25) <22AAC369-B63C-3C55-8AC6-C3ECBA44DA7B> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x7fff8cf47000 -
0x7fff8cf70ff7 com.apple.framework.Apple80211 (7.2.1 - 721.3) <4BA49D6F-373B-3F4E-A2B3-453C2ED66318> /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211
0x7fff8cfb0000 -
0x7fff8cfb1ff7 libremovefile.dylib (21.1.0 - compatibility 1.0.0) <739E6C83-AA52-3C6C-A680-B37FE2888A04> /usr/lib/system/libremovefile.dylib
0x7fff8cfc3000 -
0x7fff8cfc8ff7 libsystem_network.dylib (??? - ???) <5DE7024E-1D2D-34A2-80F4-08326331A75B> /usr/lib/system/libsystem_network.dylib
0x7fff8cff3000 -
0x7fff8d00fff7 com.apple.GenerationalStorage (1.0 - 126.1) <509F52ED-E54B-3FEF-B3C2-759387B826E6> /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Gene rationalStorage
0x7fff8d010000 -
0x7fff8d015fff libGIF.dylib (??? - ???) <8763F67F-A881-30B6-B20E-D395B4D9FD58> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x7fff8d016000 -
0x7fff8d019fff com.apple.help (1.3.2 - 42) <BF14DE49-F7E8-336F-81FB-BBDF2DB3AC09> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
0x7fff8d182000 -
0x7fff8d188fff libGFXShared.dylib (??? - ???) <8A61FA67-EB3C-319D-AE3C-64936FB26BAC> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGFXShared.d ylib
0x7fff8d189000 -
0x7fff8d189fff com.apple.ApplicationServices (41 - 41) <89B6AD5B-5C75-3E83-8C2B-AA7F4C55E400> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x7fff8d18a000 -
0x7fff8d4b6ff7 com.apple.HIToolbox (1.9 - ???) <B7D2A06B-7BE5-3355-BF7D-8139100B9B97> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x7fff8d4b7000 -
0x7fff8d4bbfff libdyld.dylib (195.6.0 - compatibility 1.0.0) <FFC59565-64BD-3B37-90A4-E2C3A422CFC1> /usr/lib/system/libdyld.dylib
0x7fff8d4c9000 -
0x7fff8daadfff libBLAS.dylib (??? - ???) <C34F6D88-187F-33DC-8A68-C0C9D1FA36DF> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x7fff8dac7000 -
0x7fff8e6cdff7 com.apple.AppKit (6.7.3 - 1138.47) <CAF5783F-F80B-30E7-929F-BBA6D96C5C44> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x7fff8e6eb000 -
0x7fff8e70afff libresolv.9.dylib (46.1.0 - compatibility 1.0.0) <0635C52D-DD53-3721-A488-4C6E95607A74> /usr/lib/libresolv.9.dylib
0x7fff8ea7a000 -
0x7fff8ea90ff7 com.apple.ImageCapture (7.0.1 - 7.0.1) <BF4EC1CC-C998-3529-A69F-765774C66A6F> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
0x7fff8ea91000 -
0x7fff8ea92fff libdnsinfo.dylib (395.11.0 - compatibility 1.0.0) <853BAAA5-270F-3FDC-B025-D448DB72E1C3> /usr/lib/system/libdnsinfo.dylib
0x7fff8ea93000 -
0x7fff8ebc9fff com.apple.vImage (5.1 - 5.1) <A08B7582-67BC-3EED-813A-4833645964A7> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x7fff8ebfb000 -
0x7fff8edfdfff libicucore.A.dylib (46.1.0 - compatibility 1.0.0) <38CD6ED3-C8E4-3CCD-89AC-9C3198803101> /usr/lib/libicucore.A.dylib
0x7fff8ee0a000 -
0x7fff8ee0cfff com.apple.TrustEvaluationAgent (2.0 - 1) <1F31CAFF-C1C6-33D3-94E9-11B721761DDF> /System/Library/PrivateFrameworks/TrustEvaluationAgent.framework/Versions/A/Tru stEvaluationAgent
0x7fff8ee0d000 -
0x7fff8eef1fff com.apple.CoreServices.OSServices (478.46 - 478.46) <70BEE269-8F4D-3FDC-B1AD-A591C0CB37E5> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x7fff8eef2000 -
0x7fff8ef0fff7 com.apple.openscripting (1.3.3 - ???) <BDCCCBA9-F440-30BD-8378-FAB5AF685A5D> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
0x7fff8ef10000 -
0x7fff8ef50ff7 libcups.2.dylib (2.9.0 - compatibility 2.0.0) <5328C0AB-F169-3786-A3EC-9E82E960CAAF> /usr/lib/libcups.2.dylib
0x7fff8ef51000 -
0x7fff8ef5efff libCSync.A.dylib (600.0.0 - compatibility 64.0.0) <528BAA66-C38C-3093-84B5-92A7832CE7BC> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
0x7fff8ef93000 -
0x7fff8f072ff7 com.apple.ImageIO.framework (3.1.2 - 3.1.2) <FFA7532B-336A-3F0B-9AB9-2A35B56ED887> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
0x7fff8f073000 -
0x7fff8f08afff com.apple.CFOpenDirectory (10.7 - 146) <BBB7C97E-7B46-3286-9128-32B5D16B5CBE> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpen Directory.framework/Versions/A/CFOpenDirectory
0x7fff8f170000 -
0x7fff8f172ff7 com.apple.print.framework.Print (7.4 - 247.3) <626C58D5-2841-3329-8C32-9F4A8353F3E7> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
0x7fff8f173000 -
0x7fff8f180ff7 libbz2.1.0.dylib (1.0.5 - compatibility 1.0.0) <DFAB8CA8-CC9D-3F58-8C12-CE120442AACD> /usr/lib/libbz2.1.0.dylib
0x7fff8f181000 -
0x7fff8f29afff com.apple.DesktopServices (1.6.3 - 1.6.3) <20812ECE-CACC-3D44-8108-025EF6B45C14> /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x7fff8f29c000 -
0x7fff8f29cfff libkeymgr.dylib (23.0.0 - compatibility 1.0.0) <61EFED6A-A407-301E-B454-CD18314F0075> /usr/lib/system/libkeymgr.dylib
0x7fff8f29d000 -
0x7fff8f764fff FaceCoreLight (1.4.7 - compatibility 1.0.0) <BDD0E1DE-CF33-3AF8-B33B-4D1574CCC19D> /System/Library/PrivateFrameworks/FaceCoreLight.framework/Versions/A/FaceCoreLi ght
0x7fff8f780000 -
0x7fff8f7a0fff libPng.dylib (??? - ???) <F4D84592-C450-3076-88E9-8E6517C7EF33> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
0x7fff8f7a1000 -
0x7fff8f843fff com.apple.securityfoundation (5.0 - 55116) <A9311EF6-B7F7-3DA5-84E8-21BC9B2C3C69> /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x7fff8f846000 -
0x7fff8f99ffff com.apple.audio.toolbox.AudioToolbox (1.7.2 - 1.7.2) <0AD8197C-1BA9-30CD-98F1-4CA2C6559BA8> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x7fff8f9a0000 -
0x7fff8fb3fff7 com.apple.QuartzCore (1.7 - 270.4) <97E20A5F-652B-3E85-8C46-DCB777248ECD> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x7fff8fb53000 -
0x7fff8fb5afff libcopyfile.dylib (85.1.0 - compatibility 1.0.0) <0AB51EE2-E914-358C-AC19-47BC024BDAE7> /usr/lib/system/libcopyfile.dylib
0x7fff90084000 -
0x7fff90085ff7 libsystem_sandbox.dylib (??? - ???) <96D38E74-F18F-3CCB-A20B-E8E3ADC4E166> /usr/lib/system/libsystem_sandbox.dylib
0x7fff900da000 -
0x7fff90103fff com.apple.CoreVideo (1.7 - 70.3) <9A9D4058-9935-3B0A-B1A6-27EB78D02249> /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
0x7fff9013d000 -
0x7fff90148ff7 libc++abi.dylib (14.0.0 - compatibility 1.0.0) <8FF3D766-D678-36F6-84AC-423C878E6D14> /usr/lib/libc++abi.dylib
0x7fff90149000 -
0x7fff90188ff7 libGLImage.dylib (??? - ???) <49BB4404-68F1-3839-A5C9-983405B59F52> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
0x7fff90284000 -
0x7fff902afff7 libxslt.1.dylib (3.24.0 - compatibility 3.0.0) <E71220D3-8015-38EC-B97D-7FDB383C2BDC> /usr/lib/libxslt.1.dylib
0x7fff904bf000 -
0x7fff904c5fff com.apple.DiskArbitration (2.4.1 - 2.4.1) <CEA34337-63DE-302E-81AA-10D717E1F699> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x7fff904c6000 -
0x7fff904d1ff7 com.apple.speech.recognition.framework (4.0.21 - 4.0.21) <6540EAF2-E3BF-3D2E-B4C1-F106180D6F20> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x7fff904d2000 -
0x7fff904f8fff com.apple.framework.familycontrols (3.0 - 300) <93828BC1-3D83-3A93-99A5-F0E7951AFC6C> /System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/FamilyCon trols
0x7fff90c64000 -
0x7fff90c6eff7 liblaunch.dylib (392.38.0 - compatibility 1.0.0) <6ECB7F19-B384-32C1-8652-2463C1CF4815> /usr/lib/system/liblaunch.dylib
0x7fff90c6f000 -
0x7fff90c70fff liblangid.dylib (??? - ???) <CACBE3C3-2F7B-3EED-B50E-EDB73F473B77> /usr/lib/liblangid.dylib
0x7fff90c71000 -
0x7fff90cb1fff libtidy.A.dylib (??? - ???) <E500CDB9-C010-3B1A-B995-774EE64F39BE> /usr/lib/libtidy.A.dylib
0x7fff90db7000 -
0x7fff90dcbff7 com.apple.LangAnalysis (1.7.0 - 1.7.0) <04C31EF0-912A-3004-A08F-CEC27030E0B2> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x7fff90e07000 -
0x7fff90e08fff libDiagnosticMessagesClient.dylib (??? - ???) <3DCF577B-F126-302B-BCE2-4DB9A95B8598> /usr/lib/libDiagnosticMessagesClient.dylib
0x7fff90e09000 -
0x7fff91125fff com.apple.CoreServices.CarbonCore (960.24 - 960.24) <6F99A26B-788F-37B9-860F-508906EC06D7> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x7fff91126000 -
0x7fff91134fff com.apple.NetAuth (3.2 - 3.2) <F0D60E34-37A9-308D-B44E-E3450906173A> /System/Library/PrivateFrameworks/NetAuth.framework/Versions/A/NetAuth
0x7fff91135000 -
0x7fff913a8fff com.apple.CoreImage (7.98 - 1.0.1) <73485E4E-1407-3913-AB3C-B54986A3E01C> /System/Library/Frameworks/QuartzCore.framework/Versions/A/Frameworks/CoreImage .framework/Versions/A/CoreImage
0x7fff913a9000 -
0x7fff913bffff libGL.dylib (??? - ???) <6A473BF9-4D35-34C6-9F8B-86B68091A9AF> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
0x7fff913c0000 -
0x7fff913c4ff7 com.apple.CommonPanels (1.2.5 - 94) <37C6540B-F8D1-355A-806C-F93D8FB522AB> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x7fff913ed000 -
0x7fff913fcfff libxar.1.dylib (??? - ???) <58B07AA0-BC12-36E3-94FC-C252719A1BDF> /usr/lib/libxar.1.dylib
0x7fff91588000 -
0x7fff9160cff7 com.apple.ApplicationServices.ATS (317.11.0 - ???) <082DEAFE-8A93-3AF2-B4E5-30012E725929> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x7fff9195f000 -
0x7fff91967fff libsystem_dnssd.dylib (??? - ???) <D9BB1F87-A42B-3CBC-9DC2-FC07FCEF0016> /usr/lib/system/libsystem_dnssd.dylib
0x7fff91968000 -
0x7fff91969fff libunc.dylib (24.0.0 - compatibility 1.0.0) <337960EE-0A85-3DD0-A760-7134CF4C0AFF> /usr/lib/system/libunc.dylib
0x7fff91b6d000 -
0x7fff91c79fff libcrypto.0.9.8.dylib (44.0.0 - compatibility 0.9.8) <3A8E1F89-5E26-3C8B-B538-81F5D61DBF8A> /usr/lib/libcrypto.0.9.8.dylib
0x7fff91c7a000 -
0x7fff91c80fff IOSurface (??? - ???) <77C6757B-D357-3E34-9424-48F962B5CC9C> /System/Library/Frameworks/IOSurface.framework/Versions/A/IOSurface
0x7fff91c81000 -
0x7fff91c81fff com.apple.CoreServices (53 - 53) <043C8026-8EDD-3241-B090-F589E24062EF> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x7fff91d6a000 -
0x7fff92053ff7 com.apple.security (7.0 - 55148.1) <E9C46204-1336-3D90-BC67-5162FC7079D2> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x7fff92054000 -
0x7fff920b6ff7 com.apple.Symbolication (1.3 - 91) <0945ACAF-AA0A-3D01-9960-72B51722EC1F> /System/Library/PrivateFrameworks/Symbolication.framework/Versions/A/Symbolicat ion
0x7fff923a1000 -
0x7fff92508fff com.apple.CFNetwork (520.4.3 - 520.4.3) <31D7A595-375E-341A-8E97-21E73CC62E4A> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
External Modification Summary:
Calls made by other processes targeting this process:
task_for_pid: 3
thread_create: 0
thread_set_state: 0
Calls made by this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by all processes on this machine:
task_for_pid: 1701
thread_create: 0
thread_set_state: 0
VM Region Summary:
ReadOnly portion of Libraries: Total=185.5M resident=91.2M(49%) swapped_out_or_unallocated=94.3M(51%)
Writable regions: Total=1.1G written=3900K(0%) resident=5256K(0%) swapped_out=0K(0%) unallocated=1.1G(100%)
REGION TYPE
VIRTUAL
===========
=======
CG shared images
96K
CoreServices
1164K
JS JIT generated code
8K
JS JIT generated code (reserved)
1.0G
reserved VM address space (unallocated)
MALLOC
43.1M
MALLOC guard page
48K
Memory tag=243
4K
SQLite page cache
288K
STACK GUARD
56.0M
Stack
10.5M
VM_ALLOCATE
60K
__CI_BITMAP
80K
__DATA
15.8M
__IMAGE
528K
__LINKEDIT
59.8M
__RC_CAMERAS
248K
__TEXT
125.7M
__UNICODE
544K
mapped file
24.7M
shared memory
312K
===========
=======
TOTAL
1.3G
TOTAL, minus reserved VM space
338.9M
Model: iMac11,3, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 4 GB, SMC 1.59f2
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD1001FALS-40Y6A0, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3
Maybe you are looking for
-
Kerberize 10.6.8 Services to 10.8.2 OD Master
http://Hi All Im wondering if anyone has come across this same issue and has managed to resolve it? Ive managed to replicate the problem on freshly installed server and cannot manage to get the server to be added into Kerberos properly so that AFP be
-
Firefox 4 hangs when attempting to view the Applications tab in Preferences
Firefox 4 under MacOS X 10.6.6 hangs when I click to select the "Applications" tab on the Preferences dialog. It never paints the pane. When this happens, it consumes 60% CPU. Running dtruss against the running process shows a little activity, but no
-
Profit center is not auto assigned to B/S account
Hi all, I actived document splitting function. When I post in FB50, Profit center is assigned to P/L account by me but it is not automatic assigned to B/S account. Follow our solution, I want the system auto enter same Profit center for P/L and B/S a
-
Hi, I have this problem, When I use me21n to create a new PO everything looks fine until I've ended filling header. When I press save button I can save a document that has no items (that is bad) because before I get a popup with warnigns, errors, etc
-
Hi, I am trying to display a histogram on a JPanel and place that on a JScrollPane. My problem is that the JScrollPane doesn't seem to think it is needed when it is. I have not set any sizes and the histogram(Graphics 2D) is not being fully shown in