Do 17-inch and 20-inch iMac G5's have the same hard drive

I have two iMac G5's. One 17-inch 1.8Ghz, and the other a 20-inch 1.8Ghz.
The Hard drive is gone on the 20-inch. Is it possible to remove the hard drive from the 17-inch, and install it in the 20-inch. Do they both use the same Hard drive type?

All iMac G5s and Intel iMacs both use Serial ATA hard drives. You can happily and cheaply buy new larger capacity drives easily anywhere on the highstreet. I can't really see the point in using a 2-3 year old drive if you are going to the effort of cracking one of these things open:Examples of suitable drives.
Likewise you'll probably find a brand new Superdrive is faster and pretty cheap:
http://eshop.macsales.com/item/Other%20World%20Computing/MG5SL8XDLK/
mrtotes
Message was edited by: mrtotes: added links.

Similar Messages

I have an imac 20 in. The old hard drive crapped out on me. i put a new harddrive in and am now trying to install linux. But the imac doesnt recognise any keyboards

I have an imac 20 in. The old hard drive crapped out on me. i put a new harddrive in and am now trying to install linux. But the imac doesnt recognise any keyboards

Without a bootable backup/clone or a Time Machine backup of your previous Snow Leopard installation or a saved copy of Lion's install app, you'll have to upgrade your Leopard volume to Snow Leopard (10.6.6+) so you can waste another hour or more DLing the Lion thing again.

I updated iTunes to 10.4 version and now it doesn't start and sen a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regard

I updated iTunes to 10.4 version and now it doesn't start and send a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regards

Only way to get iMac starting again was to re-install 10.4.4 from DVD, and then update it into 10.4.6. For a while it worked perfectly, just as before.
Then I tried to print to CD with my EPSON Stylus Photo 950 from Adobe Photoshop Elements (2.0). It didn't print anything, but printer started flashing all lights. The print job was not performed, so I did remove it from the Printer Utility. After that the iMac started "ticking" again, same noise than before, after 10.4.7 installation. I did re-boot iMac. It never started, it does stuck on gray screen (gray block running clockwise). HW test from DVD didn't find any problems (extended search looping 3 times). But Disk Utility found hard drive to have inaccurate node structure, it could not fix it.
Apple support recommended to use DiskWarrior. However, it does not support (yet) Intel Macs. I haven't got TechTool Pro 4.5.1 anywhere. iMac does start on to FireWire mode (T at boot), but I cannot see the disk from 10.2.8 iMac.
So, obvisously the problem is not 10.4.7. I believe it to be ESPON printer driver compatibility on Mac OSX. This does not suprise me, EPSON printers *****, I shall never purchase one again. However, disk catalog structure should not get messed by one faulty printer driver!

My iTunes library is on an external hard drive; how do I set it so other users (accounts) on my imac, will also have the same library, with the same playlists

my iTunes library is on an external hard drive; how do I set it so other users (accounts) on my imac, will also have the same library, with the same playlists

Quit iTunes.
Sign into another user account.
Hold Option, launch iTunes.
Select Choose library... and select the iTunes folder on the external.
Do this for all users.
NOTE: You must quit iTunes when switching users as the library can only be opened by one user at a time.

Do i need to buy the same hard driver for my iMac or i can buy any hard driver 3.5?

Do i need to buy the same hard driver for my iMac or i can buy any hard driver 3.5?

You can buy any 3'5" SATA hard drive for the iMac. You can buy a hard drive at OWC.
Note that Late 2009 and newer iMacs have the temperature sensor inside the hard drive, so it's important to get one with that sensor. In this case, I recommend you to take your computer to an Apple Store or reseller and get your hard disk replaced

I have a new MAcBook Air and my photos don't fit on the internal hard drive. I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto. How do I set an external hard drive as the default drive?

I have a new MAcBook Air and my photos don't fit on the internal hard drive. I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto. How do I set an external hard drive as the default drive in Iphoto?

Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Moving Events and Projects from one location to another on the same hard drive.

Hello.
I've searched in the FCP X User Manual, on this forum and in Google, but have found no explanation of how to do this, so I'm posting this here in hopes that someone in our community will be able to help.
I've previously stored my FCP X Events and Projects folders on an external 3TB hard drive, because there is more room on it than on the internal 1TB hard drive, but, since then, I've worked with other media apps, for video, photography and audio, the files for which are also stored on the external hard drive, and this has created a bit of clutter with no folder structure to keep it tidy.
I like an organised file structure on my system, to keep it uncluttered, easy to navigate and efficient to use, so I put all the files for my photography, video and audio apps into their own folders, which are, in turn, stored in their appropriate folders for Audio, Photography and Video, and those three folders are stored in a folder called Media, and then I directed each app to its own files.
The only app with which this has been a problem is FCP X. While there is a way of relocating projects and events from within FCP X, it allows the user to move them from one hard drive to another, and not, as I want, from one place to another on the same hard drive.
I'm not sure if it matters, but perhaps it's relevant to mention before the next paragraph that the files that had previously been imported as events are, to save hard-drive space, stored in the events folder as shortcuts to the original files, which are stored elsewhere on the drive, rather than as duplicates of those files.
In Finder, I copied the Events and Projects folders to their intended new locations and tried in the app to link the events and projects to their new Finder location. It seemed to have worked, until I moved the original folders to the Trash. On re-opening FCP X, it was clear that the linking hadn't worked. I returned the original folders from the Trash to their original location, but that didn't entirely reverse the problem. I noticed also that, in the original and duplicated Events folders, the shortcuts had lost their links to the original files stored elswehere on the drive.
Fortunately I had run a backup before starting, so I restored the original folders and the app from the backup, and all was back to normal.
I'd be grateful if anyone could advise me on whether or not it's possible to move FCP X events and projects from one place to another on the same hard drive with the app's compliance.
Thank you.

Ludio wrote:
I'd be grateful if anyone could advise me on whether or not it's possible to move FCP X events and projects from one place to another on the same hard drive with the app's compliance.
I
Message was edited by: Russ H Apparently mis-read the questions.

Leopard and Lion on the same hard drive

So I do need tu run PowerPC Apps sometimes too and I have installed Leopard on the same hard drive (partitioned of course) as Lion is, because I dont have other hard drives.
Anyway, I do have a little problem and it's about the Spotlight. Whenever I search for something from Lion it also searches from Leopard and it is a little bit annoying.
Can I somehow disable Spotlight to search from Leopard when I'm booted on Lion and vice versa?
Thank you

Found the solution System Preferences -> Spotlight -> Privacy

I have a new computer and have all my music is on an external hard drive. I have the external hard drive connected to my computer. How do I get my music that is on my ipod to go to the itunes on the new computer.

I have a new computer and have all my music is on an external hard drive. I have the external hard drive connected to my computer. How do I get my music that is on my ipod to go to the itunes on the new computer.

What error message are you getting when you try to launch iTunes? (Precise text, please.)

In CS6 my created and then saved jpegs do not have the same icon as jpegs I receive from others. Whe

In CS6 my created and then saved jpegs do not have the same icon as jpegs I receive from others. When attached to email they don't actually attach but appear embedded in the email and vertically squished. Any ideas?

It could be as simple as having two different file extentions jpg vs jpeg. As for the emails, that may depend on how you are attaching them to the email.
In most email programs you can open a new document then choose file attach or file import. Former would be attachments or links and the latter would be embedded.
On windows systems you can also send images to the email app, in the explorer right clicking and sending would open a small app that will resize the image to reduce the file size. This app could in theory squish the image.

I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, re

I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, reinstalled still have same issue.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Can I use the same hard drive to back up my photos and also do Time Machine backups?

I bought a 1T external hard drive today for my MacBookPro with the intentions of backing up my iPhoto library, and then deleting it to make more space on my hard drive.
I also tried and failed to install Time Capsule because my Verizon modem won't let Time Capsule run with it unless I use Time Capsule as my wireless.
That said, I want to back up my computer, and even though I copied my iPhoto library already, I have plenty of space to do a Time Machine backup as well.
Is this something I can do? Please let me know. After two hours on the phone with Apple only to learn Time Capsule was a waste of money, I'm hoping I don't need to buy another external HD yet…

If you want to use the drive for both TimeMachine and storage, attach the drive and then open Finder > Applications > Utilities > Disk Utility. Choose the new hard drive from the left sidebar, and then in the main panel choose Partition.
Choose the number of partitions to be two. Click the first partition and change the size if you do not want the default half of the drive. Name the partition (such as Backups), then accept the default format Mac OS X Extended (Journaled) and the partition table as GUID. Click Apply and confirm you want to erase the drive.
Then do the same for the second partition, but of course, give it a different name.
When finished Quit Disk Utility.
Turn ON TimeMachine in System Preferences and direct it to your backup partition.

My old laptop crashed and I have a new one, but I still have the old hard drive, can I get my old bookmarks from it?

My old laptop broke and I had to buy a new one. I have recovered all data from the old hard drive and want to know if I can recover my old Firefox bookmarks from it as well? I have put Firefox 4 onto my new machine, but cannot find a way to import the old bookmarks from the other hard drive!

http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Vista & Win7: <br />
''drive'':\Users\''Windows login user name''\AppData\Roaming\Mozilla\Firefox\Profiles\''profile_name''

Can I back up images in Lightroom to an external hard drive as I'm shooting tethered and sending files to a folder on the internal hard drive?

I'd like to be able to send files to both the internal hard drive and an external hard drive as I'm shooting tethered in Lightroom. Can this be done and if so how? Thanks.

Welcome to Apple Support Communities
OS X can only restore data to the drive where Time Machine backed up files from.
If you want to restore files from the Time Machine backup onto an external drive, your only option is to access to the Time Machine drive manually (open a Finder window and choose your Time Machine drive in the Finder sidebar), navigate through its folders and copy the files you want to the external drive

My old hard drive is dead and I need to move iTunes to the new hard drive

My computer's old hard drive contained some corrupted Windows files. A friend was able to get my husband's iTunes file off the old hard drive and it's saved in the My Music folder on the new hard drive. Can someone please give me super easy to understand instructions on how I get the iTunes stuff onto the new hard drive? I don't want to mess anything up because he has such a large number of albums in the iTunes folder. Thank you in advance!

It sounds like you just have 2 formatted drives (SSD, HDD) that are not configured as a Fusion drive. If so, you have to manually move files from the SSD to the HDD and visa versa.
If your system would have come configured with a Fusion drive (SSD and HDD 'fused' together) then OS X would maintain file movement from the SSD to the HDD without user intervention.
Look here then scroll down to Introducing Fusion Drive for a brief explanation.

Do 17-inch and 20-inch iMac G5's have the same hard drive

Similar Messages

Maybe you are looking for