Do 875p neo's 32-bit PCI slots,support 66Mhz speed?

I have the 875p neo motherboard and I would like to knlow if the PCI slots on this motherboard support 66Mhz speed or just the basic 32bit/33Mhz.
Can anyone help me with this?

Thanks guys.I knew about the server motherboards but I was hoping that modern mobos like the 875p neo would have such a feature as 66 Mhz.
Guess I was wrong!!!

Similar Messages

  • Does Satellite A100-812 (PSAAR) PCI slot supports MXM standard

    Hi,
    I have a Satellite A100-812 at the moment and I was wondering if the PCI-e slot matches 1 of the mxm standarts.
    And if so, could it be replaced with another graphics card, say an 8600M GT?

    Hi Marien
    The Satellite A100 does not support the MXM (Mobile PCI Express Module) interface and the graphic card replacement or upgrade is definitely not possible!!!
    The graphic card is fixed and soldered on the board and you cannot remove it!
    If you want you could use the forum advanced search option and could search for similar threads regarding this theme.
    But I assume you will find always the same info which is; GPU upgrade is not possible
    Best regards and have a nice day!!

  • 64-bit PCI vs 32-bit

    I have a lan card that I am developing a driver for, which works under
    Solaris 7 sparc in a 32-bit PCI slot. On a machine with 64-bit slots
    and running Solaris 7, the cards fails its self test. We are hypothesizing
    that Openboot is disabling the card for some reason. Does anyone know of
    issues with regard to 64-bit PCI?
    Thanks, Mike Barley

    Hi Jared,
    I would suggest that repost a new thread on
    Visual Studio Development      >    
    Visual Studio Setup and Installation forum.
    Have a nice day!
    Kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • K8N Diamond Plus. Which PCI slot for Adaptec 39320

    Hi
    I understand the Orange slot is not sharing resources with the other PCI slots.
    Would this be best for my RAID card (its a 64bit RAID card going into a 32bit slot) or would it not work at all?
    thanks
    Charker 

    Charker,
    You will have to contact MSI Tech Support on that one, that question has crossed my mind to whether that is a full function PCI slot or not.  It is the only open PCI slot if you have a Graphics Card in the Secondary x16 slot.  If it is full function PCI slot, the only thing I know of that stop you using your 64-bit Controller in it are two Caps that may get in the way of the card over hang. 
    Burmo,
    You should know your subject before you make comments like that on the Forum.  Most all PCI 64-bit I/O cards will auto sense the slot type they are plugged into and adjust the interface to fit the slot capabilities.  Only problems using a 64-bit PCI card in a 32-bit PCI slot is you loss interface bandwidth and there maybe physical components mounted behind the 32-bit slot that will not allow the PCI 64-bit card to be inserted.
    Luckily I have communicated with Charker enough, that I do not think you statement would have steed him wrong, but someone with a low level of computer knowledge, you could have cost him/her a lot of money.  Those Controller cards he is talking about cost two or three times what the Diamond Plus motherboard costs.  Next time research you answers before you make it, if you not sure and if you do not know do not comment.
    Roger
    When submitting a problem, include a complete list of your system components; include part numbers, all Power Supply Voltages, and their output ratings.  It is almost impossible to estimate what your problem is without knowing something about it. 

  • NEO-FIS2R PCI Slot IRQ Information

    I've got a NEO-F1S2R on the way and am trying to figure out where I should place my M-Audio Audiophile 2496 and Hauppauge PVR250 for optimum performance. In the past I found that I had to place my soundcard on PCI slot with its own IRQ, same with the PVR250, to get the best results (if not I found I got pops and crackles during audio playback).
    Can anyone tell me how IRQs are assigned to each of the PCI slots? Which slot is shared with the AGP slot. Which slot(s) are shared with the RAID controller? I've searched high and low but can't find this information.
    Any help is greatly appreciated.
    Thanks,
    -Mike

    you definatly want your own irq for the m-audio/midiman card, in my case i have my hammerfall card running in slot 3 (2 away from agp) and my uad card in slot 4 and both have there own irq without having to assign in bios, this might not be your issue though as maudio cards are very shoot and miss, althought it might cost 2-3 times as much as your soundblaster card, it is on the entry level tier of pro audio cards, having this said and done, they do sound great if they get working properly,
    if you continue having problems after you solve your irq issues hit me a pm, as i am very experienced with recording systems of most platform, first thing i can tell you is if your using cubase sx or nuendo, make sure you select asio drivers for your midiman card,  apologies if youve already been this far, but that is the most overlooked part of a vst system, (if asio is a selection in your app be it sonar or acid ect pick asio over andy dx or mme drivers as they are the most low latency and high performing for windows pro audio solutions) other than that check your buffer setting from your apps, 1024 buffers is most recomended and will give you about 23 milliseconds of latency, smaller buffers will will reduce your latency but will require more juice from your system ect, again aplogies if you already know this,

  • V490 pci slot (64 bit) backwards compatible with 32 bit card?

    As the subject states I have a pair of SunFire V490's that I need to put 32 bit fiber NIC's in. (Reason for 32 bit cards is that it is a one way solution and the company has not updated their tech www.owlcti.com )
    It is my understanding that 64/32 bit cards/slots are usually interchangeable they just run at 32. Any help on the matter is greatly appreciated.

    Hi George,
    Thank you for responding.
    Is the hot-plug issue just with all of your PCI cards or just some? I have two NI PCI-6514 cards in hot-plug slots that show up in the NI Measurement & Automation Explorer. Unfortunately, I have yet to test the I/O functions of the cards.

  • What does 64-bit 33 MHz mean for my PCI slots?

    Hi all,
    I was looking at my specs for my G4 and saw this under the PCI slot expansion section, 64-bit 33 MHz. What does it mean and what can I add to these slots to expand my Mac to the max? I know I can add video cards, controller cards,etc. What else?
    Thanks
    web dude

    Hi! PCI cards that are Mac compatible. Graphics cards, usb/firewire, gigabit ethernet cards, wireless cards and disk controller cards are the main ones. Tom

  • [VIA Series] PT880 Neo - 2 dead PCI slots?

    Scanning through the forums, I didn't see anything relevant so here goes.
    I bought my board not too long ago and have been slowly adding peripherals to my system.  I try to spread things out when choosing a PCI slot for a new card.  Well, looking at my sig, I have discovered that two of my PCI slots are dead. 
    When I say dead, I mean that I'll install a card there (previously never installed), boot up to Windows, and wait for the Found New Hardware dialog.  I think that this is slightly broken, so I go to the Device Manager and none of my new items show up with uninstalled or installed drivers.  I crack my case, move the card to one of the working slots, and everything is dandy. 
    For the record, I refer to PCI 1 as the closest PCI slot to the AGP slot (most central physically on the motherboard).  Inheritently, PCI 5 is the slot closest to the corner of the motherboard.  I am having problems with slots 2 and 3. 
    I am hoping that there is a dip switch or a rule similar to memory slot usage that will fix this problem.  I have not found a solution yet and am hoping that someone here can help.
    Thanks.

    Update the BIOS, clear the CMOS, if ur problem is not solved, RMA the mainboard.

  • Is the 875P Neo-FIS2R a bad mb?

    Like the title says:
    Is the 875P Neo-FIS2R a bad motherboad? I can understand that tis is a place where you will find more problems then anything else. But I mostly see motherboard specific problems, that occur on many mb's of the same type. I find that a bit disturbing...
    A friend of mine never had any troubles with it, then again, he might not tell me, or he is lucky. But based on his 'good' experience I have a 875P lying here right now.
    I cannot use it yet since I am missing a graphic card to go with it, I expect that to arrive next Tuesday. Im a bit nervous now.....
    Another question while I'm at it: will both controllers (the Intel and the Promise) work, or are the mutual exclusive. So I guess I mean is: do I have 3 P-ATA connectors on my mb or either 2 or 1??
    If it is the latter option, that would be lame, then I would have to insert my PCI card with a pomise controller....

    I have to say the 875P is definitely NOT a bad motherboard as long as you have approved components. It works very well for "standard" usage. It has all of the top features from Intel - 875P chipset, 10Gbit CSA, ICH5R, ADI audio, firewire, etc.
    I am concerned with some things MSI could/should have done better in the first place:
    1. Wrong NB temp (and it seems to be affected by NBFAN)
    2. No SFAN speed monitoring though it wouldn't have cost more to put it in ... X(
    3. Slow frequency of BIOS release or update fixes vs other "top tier" motherboard manufacturers
    4. More issues than others with popular memory modules
    5. Confusing or "poorly documented" BIOS features/interface leave tweakers less in control
    6. Corecell, DOT & MAT, BIOS are still a work in progress
    When you start looking for topnotch performance and stability via tweaking OR major overclocking - that is where it falls short - contrary to what their marketing says.
    Read this thread  where an 875P owner compares his new Asus P4C800E Deluxe (after his 875P Neo failed and had to go for RMA). I summarize his "review" here:
    Quote
    Criteria on MSI 875P Neo-FIS2R vs ASUS P4C800E DeLuxe
    Ease in setting up P4C800E
    Memory compatibility P4C800E
    Overclocking
    - setting options Neo
    - higher performance P4C800E
    - lower temperatures P4C800E
    - lower voltages P4C800E
    Video card compatibility Neo
    Hard drive performance Same
    Benchmark scores Est. 5% better on Asus vs MSI
    Extra Goodies:
    ASUS - ability to use USB ARMD devices and emulate them as floppies, HDD, and even CD-ROM
    MSI - AUTO overclocking (Captain, etc. on the Neo boards - 5%, 10% etc on the Asus boards) works much better
    quote:
    ... the Asus is much less of a problem child when setting up. So my final ruling is, don't expect much more from the ASUS board, but if you are fed up with your 875P Neo, or are returning/RMA-ing your board anyway, you might be pleasantly surprised with what the ASUS P4C800/E/Deluxe can do for you.
    I think you'll find similiar comparisons from 865PE Neo2 users who had tried the P4P800...
    So far many have said they're still keeping their MSI boards when RMA comes back
    Conclusions:
    - Good HW but FW/SW satsifactory~needs_improvement.  :]
    - If you don't do major tweaking , and want stability + full features, the 875P is a GOOD board overall, IMHO.  8)

  • 875P NEO FIS2R repaired

    My board which died with BIOS 1.3 was repaired by the reseller today. I witnessed the process and thought you guys would like to know.
    This guy knew from experience that an 800MHz CPU wouldn't work when trying to get the board back to life again, so first of all he put in a 533MHz CPU (don't know core clock, but doesn't matter I guess)
    Then he took out my 2x512MB samsung PC3200 and put in a single pc2100 module.
    After that he put in this custom (PLC programmer?) card from MSI in a PCI slot and powered up. From the status LEDs on the PLC card he knew it didn't work. Power of and back on: success. Power off and PLC card removed. Power on and boot from floppy to flash BIOS to v1.4. Flash successfull. Power off and power on: dead. Power off, clear CMOS, power on: dead. Power off, remove PC2100 module and insert corsair module (don't know spec, but it had heat-spreader), power on: POST. Entered BIOS and load setup defaults. Reboot: POST. Power off, removed CPU & memory and put my stuff back. Power on: POST.
    System repaired.
    I asked if it is safe to mess with mem timings in BIOS v1.4. He said that it's possible that the board won't POST then, but that can be cured by CMOS clear and when needed only one memory module (no dual channel) to get the board to POST again.
    But I'm not going to try that. SPD is fine for me right now.
    System runs great again.

    I had the exact same problem with my new 875P Neo FIS2R, but after reading the post from Francois I tried my own little test.
    I was upgrading from a 2.26/533 system with 333 memory so, of course, I still had the old CPU and memory.  After being hung on the 'Keyboard Init' step on the D-Bracket after my 1.1 to 1.4 BIOS upgrade I swapped the old CPU and memory onto the board.  Everything worked fine!  I was able to see the 1.4 upgrade took fine.
    Afterwards, I removed the old stuff and put the new stuff back on and it still works.  I have no idea why, just thought I'd share.

  • 875P Neo FIS2R DRAMM / Boot Problems

    After having significant difficulties with my new machine  
    I thought it may be helpful to others to  know how I fixed the Mother Board problems. I have the following configuration:
    875P Neo-FISR
    P4 3.02 GHz  478P 800fsb
    Two Geil PC 3200 400MHz 500mb DDR’s at positions 1 & 3
        ( CAS 2  6-3-3 1T; 2.6-2.9 V)
    Two Seagate 120 Gb 7200rpm SATA drives on Promise Raid 0
    Generic Cd Reader
    Pioneer DVD Writer DVRA05
    ATI 9700 Pro
    Aquarius Liquid Cooler
    Enermax Fan Monitor
    ( Addictions are bad )
    Open all the boxes and put everything together. Boots up once and then starts active unstable.
    Clear the CMOS and then it fails to post at all.
     No monitor at all.
    Looking at this web site I thought that putting the Aquarius Fan on the SFAN 1 slot may not be playing with CoreCell Chip well. Switched to the Enermax and it boots. Remains very unstable. Reading an email here I changed the DDR voltage to 2.7. System stable but I can’t get the Promise RAID to engage.
    Looked at another email ( Thanks Mr. K. Keenan)
     and set the BIOS as follows:
    Frequency / Voltage Control:
    CPU Ratio Selection:     Locked
    Dram Frequency :          AUTO
    Spread Spectrum :          DISABLED
    Adj. CPU BUS Clock:   230
    DDR Clock:                   460
    Adj. AGP/PCI Clock:     67.1/33.50
    CPU Vcore Adjust:         YES
    CPU Vcore:                    1.5750V
    DDR Power Voltage:      2.70   ( KK suggested 2.65)
    AGP Power Voltage :     1.75
    Everything stabilized.
    Start adjusting the Promise RAID settings (following M. Johnson’s advice)
    as follows in the BIOS:
    ON CHIP  IDE Configuration
    ON Chip ATA Operate Mode:      Native Mode
    ATA Configuration :                     S-ATA Only
    P-ATA Keep Enabled :                  YES
    P-ATA Channel Select :                BOTH
    S-ATA Ports Definition:                PO-1st/P1-2nd
    Configure S-ATA as Raid :            YES
    Back to
    INTEGRATED PHERIPHERALS
    ONBOARD Promise IDE:             as RAID
    Run Windows 2000 prof and it finds the array but can’t format ( ???)
    Tried formating with Millenium Boot disk ( Bad move).
    Windows ME won’t let Win 2000 boot.
    Clear CMOS and then the system dies.  
    Spent  days trying to get at least the monitor to fire with no luck.
    Reread web site and picked up on the Low Latency Memory issues noted
    in a note ( Thanks Mr. K. Keenan again). Put in some Kingston cas2.5
    333 DDR’s at 1 & 3 positions.
    Fires up immediately.
    Windows 2000 boots and loads. Totally stable.
    Never to be one that leaves well enough alone…
    Set the BIOS under
    ADVANCED CHIP FEATURES as follows:
    Under dram Timing Setting:
    Configure DRAM Timing by SPD :    Disabled
    Cas Latency:                      2
    RAS # Precharge                   3
    RAS # to CAS# Delay:              3
    Precharge Delay:                  6
    Burst Length :                    8
    AGP Aperture Size:               128 MB
    Shut down and replaced the 1GB ( 2 x 500) Geil DDR 400’s.
    Rock stable and faster.
    Evidently when you clear the CMOS, the board resets
    the DDR Power Voltage to 2.50 which is too low for
    some of the faster DDR SDRAM’s. Unless you put
    slower chips in you can’t adjust the bios to a higher voltage.
    I would love to know why MSI did that.
    Hope this trail helps somebody else.
    Best     RBC

    Quote
    Originally posted by Undergrid
    Quote
    Evidently when you clear the CMOS, the board resets
    the DDR Power Voltage to 2.50 which is too low for
    some of the faster DDR SDRAM’s. Unless you put
    slower chips in you can’t adjust the bios to a higher voltage.
    I would love to know why MSI did that.
    Simply, when you use the jumpers to reset the BIOS all the settings, including the voltages, get reset to the default.  The default power setting for RAM is 2.5v, and I would assume that its difficult to find RAM that doesn't run at that voltage at least well enough to get into the BIOS.  What use would the jumper reset be if it only selectivly reset settings?
    Hi all,
    The system will reset the performance to Slow and the DDR ram timing to default by just 4 unsuccessful boot up.
    Meaning just press reset button for about 4 times and the system will boot with the default setting for the performance and RAM Timing.
    So I do not need to do jumper reseting or open the CPU casing.
    Cheers.

  • 875p Neo - PC halts on Cold Boot (Initalising Keyboard)

    Everytime I press the power on button on my PC you can hear the power start up, cd and dvd rom light come on and hard disk light comes on for a short period of time.  If you then press reset or press the power on and off again - it all springs to life !!!!!   !!!
     :O  This problem is Pi*#ng me right off!!! Loads of people are complaining of it - what are you doing about it MSI???
    I Cleared the Cmos, upgraded to 1.4 bios but that made no difference.
    My spec is:
    · Enermax 430watt PSU
    · MSI 875P Neo-FIS2R Motherboard
    · Intel P4 3ghz, 800fsb Processor
    · 2 Geil PC3200 400Mhz 512mb Memory Modules
    · Clean install of Windows 2000 Professional
    · Coolermaster 201 Aluminium ATX Case
    · Western Digital Caviar Special Edition 100GB HD
    · Sony DRU-500AX DVD Writer
    · NEC DVD Rom
    · Gainward Geforce4 Ti4200 X8 AGP with 128mb DDR Ram
    . Videologic Sonic Fury Soundcard
    · HCS PCI 56k Modem
    I looked at the MSI manual, which said to look at the back of the machine at the D-Bracket LED’s, which is supposed to tell you what is wrong. Every time the fault happened the LED’s pattern (according to the manual codes on page 10) showed that it was the “Initialising Keyboard Controller”.
    I Changed the Keyboard but the problem still exists. I pulled the machine apart bit by bit to see if any one piece of hardware was the cause - but the problem still occurred! I even tried another PSU and hard disk but NOOOOOOOOO! didn't work.
    My mem timings are set by SPD and I have tried lower settings.
    I have sent a more detailed version of this to MSI Tech Support 3 days ago - BUT HEARD NOTHING. Arrrrrggggghhhh !!
    Anyone with any solutions??? PLEASE HELP!!!!
    Trevor Hatley.

    Thanks guys, I'll keep that in mind, but I have just heard from my retailer that they are sending me a brand new motherboard!!  Wahoooo!  Great service from http://www.pcupgrade.co.uk
    Do you think I should upgrade to 1.5 bios when I get my replacement mobo????
    Anyone had any 1.5 problems??
    Please let me have your comments.
    Thanks,
    T Hatley.

  • Modem problems on 875P Neo

    Hi,
        I recently upgraded from a P4 1.4 on an ASUS maotherboard to a P4 3Ghz on an 875P Neo. I have an ASUS V8460 Video card and a Creative SBLive! 5.1 with an Intel 56Kbps PCI HaM modem. Other than the modem everything seems to be working fine. My net connection is really pathetic though. I get disconnected every 2 minutes with random errors.
    I have a feeling, enabling Hyperthreading is causing this problem.
    Has anyone else faced anything of this sort?
    Does anyone know of any modem that works with the above settings? I don't want to disable HT, 'coz it really makes a difference while video editing.
    Any help will be appreciated

    I heared of HT bothering 56K modems.
    You can try another PCI slot and updating drivers befor seeing about HT.

  • 875P Neo-FISR vs. 865PE Neo2-V

    Hi, I appreciate any help with this question. I own 2 different MIS motherboards currently and would like to know which would be the better one to use for my system build.
    875P Neo-FISR
    or
    865PE Neo2-V
    Specs:
    Pentium4 3.2ghz socket 478
    2 sticks of PC3200 512mb DDR memory ( kingston Hyperx)
    MSI geforce 6600 agp
    500watt psu ( XG )
    Does it matter what board I use?
    Thanks!

    875P chipset supports ECC RAM and 865PE/P chipset doesn't.
    875P FISR is the 2nd Rev from the predecessor 875P FIS2R and has better support for Prescott CPUs. 865PE Neo2-V is a cutdown version of the predecessor 865PE Neo2 S/LS/FIS2R/PLS/P and has only 2 RAM slots.
    To put the 2 for comparsion, I would choose the 875P Neo FISR but if you are not comparing the cutdown version of the 865PE chipset, I would still favour the 865PE chipset.

  • PCI slot in Thinkpad Dock II unusable

    Hello, I have a Thinkpad a22m 2628-S1U which can be used with the Thinkpad Dock II. To avoid feeling tempted to buy a new laptop I bought that dock as well as an ATI Radeon x1550 to put in its PCI slot. These items were said to be compatible on http://thinkwiki.org the Linux thinkpad wiki.
    Now that I've tried it out, I'm starting to think the contributors to that site were windows users who didn't read the topic. Starting up docked gave the following lspci output (notice there's no radeon card):
    00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
    00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
    00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
    00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
    00:03.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09)
    00:03.1 Serial controller: Xircom Mini-PCI V.90 56k Modem
    00:04.0 PCI bridge: Texas Instruments PCI2032 PCI Docking Bridge
    00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
    00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
    00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
    00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
    00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
    01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
    08:01.0 IDE interface: Silicon Image, Inc. PCI0648 (rev 01)
    08:02.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
    08:02.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
    0f:00.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
    For comparison, here's what my lspci looks like undocked:
    00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
    00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
    00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
    00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
    00:03.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09)
    00:03.1 Serial controller: Xircom Mini-PCI V.90 56k Modem
    00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
    00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
    00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
    00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
    00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
    01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
    02:00.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
    So a few parts of the dock are getting detected but not the most important parts. The error that I think is related to the absence of the graphics card appears in dmesg. Look for the part about "cannot allocate resource region":
    Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008
    PAT disabled. Not yet verified on this CPU type.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
    BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    Entering add_active_range(0, 0, 131056) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 131056
    HighMem 131056 -> 131056
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 131056
    On node 0 totalpages: 131056
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 992 pages used for memmap
    Normal zone: 125968 pages, LIFO batch:31
    HighMem zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    DMI 2.3 present.
    ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
    ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
    ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
    ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
    ACPI: FACS 1FFFF000, 0040
    ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    ACPI: PM-Timer IO Port: 0x1008
    Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    SMP: Allowing 0 CPUs, 0 hotplug CPUs
    PERCPU: Allocating 39464 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130032
    Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
    ACPI: Added _OSI(Linux)
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (0140e000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    Detected 697.417 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 514452k/524224k available (2120k kernel code, 9264k reserved, 744k data, 264k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee4000 - 0xfffff000 (1132 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    .init : 0xc03d3000 - 0xc0415000 ( 264 kB)
    .data : 0xc031225e - 0xc03cc380 ( 744 kB)
    .text : 0xc0100000 - 0xc031225e (2120 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay using timer specific routine.. 973.82 BogoMIPS (lpj=1622127)
    Security Framework initialized
    Capability LSM initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080321
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0e80)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (973.82 BogoMIPS).
    net_namespace: 652 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14
    PCI: Using configuration type 1 for base access
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
    pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
    pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
    pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
    pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
    PCI: Transparent bridge - 0000:00:04.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DOCK._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
    ACPI: Power Resource [PSER] (off)
    ACPI: Power Resource [PSIO] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
    PCI: setting IRQ 9 as level-triggered
    ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
    PCI: setting IRQ 7 as level-triggered
    ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt 0000:08:02.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt 0000:08:02.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
    PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
    PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
    system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x103f has been reserved
    system 00:02: ioport range 0x1040-0x104f has been reserved
    system 00:02: ioport range 0xfe00-0xfe0f has been reserved
    system 00:09: ioport range 0x15e0-0x15ef has been reserved
    PCI: region 0000:08:02.0/9 too large: 0x0000000000000000-0x0000000003ffffff
    PCI: region 0000:08:02.1/9 too large: 0x0000000000000000-0x0000000003ffffff
    PCI: region 0000:08:02.0/10 too large: 0x0000000000000000-0x0000000003ffffff
    PCI: region 0000:08:02.1/10 too large: 0x0000000000000000-0x0000000003ffffff
    PCI: Bridge: 0000:00:01.0
    IO window: 2000-2fff
    MEM window: 0xf0200000-0xf02fffff
    PREFETCH window: 0x00000000f8000000-0x00000000fbffffff
    PCI: Bus 15, cardbus bridge: 0000:00:02.0
    IO window: 0x00001400-0x000014ff
    IO window: 0x00001c00-0x00001cff
    PREFETCH window: 0x30000000-0x33ffffff
    MEM window: 0x34000000-0x37ffffff
    PCI: Bus 19, cardbus bridge: 0000:00:02.1
    IO window: 0x00003400-0x000034ff
    IO window: 0x00003800-0x000038ff
    PREFETCH window: 0x38000000-0x3bffffff
    MEM window: 0x3c000000-0x3fffffff
    PCI: Bus 9, cardbus bridge: 0000:08:02.0
    IO window: 0x00004000-0x000040ff
    IO window: 0x00004400-0x000044ff
    PCI: Bus 13, cardbus bridge: 0000:08:02.1
    IO window: 0x00004800-0x000048ff
    IO window: 0x00004c00-0x00004cff
    PCI: Bridge: 0000:00:04.0
    IO window: 4000-4fff
    MEM window: disabled.
    PREFETCH window: disabled.
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt 0000:08:02.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt 0000:08:02.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 662k freed
    Simple Boot Flag at 0x35 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1006
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
    pci 0000:01:00.0: Boot video device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial 00:0c: activated
    00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 264k freed
    input: AT Translated Set 2 keyboard as /class/input/input1
    ACPI: ACPI Dock Station Driver
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:07.1: version 2.12
    scsi0 : ata_piix
    scsi1 : ata_piix
    Switched to high resolution mode on CPU 0
    ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
    ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
    ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
    ata1.00: 195371568 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/33
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
    ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI interrupt for device 0000:08:01.0 disabled
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda:<4>Driver 'sr' needs updating - please use bus_type methods
    sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ReiserFS: sda2: found reiserfs format "3.6" with standard journal
    ReiserFS: sda2: using ordered data mode
    ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda2: checking transaction log (sda2)
    ReiserFS: sda2: Using r5 hash to sort names
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    Non-volatile memory driver v1.2
    thinkpad_acpi: ThinkPad ACPI Extras v0.20
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
    Registered led device: tpacpi::thinklight
    thinkpad_acpi: another device driver is already handling bay events
    thinkpad_acpi: disabling subdriver bay
    Registered led device: tpacpi::power
    Registered led device: tpacpi:orange:batt
    Registered led device: tpacpi:green:batt
    Registered led device: tpacpi::dock_active
    Registered led device: tpacpi::bay_active
    Registered led device: tpacpi::dock_batt
    Registered led device: tpacpi::unknown_led
    Registered led device: tpacpi::standby
    input: ThinkPad Extra Buttons as /class/input/input2
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    e100: eth0: e100_probe: addr 0xf0120000, irq 10, MAC addr 00:03:47:0f:de:3d
    eepro100.c:v1.09j-t 9/29/99 Donald Becker
    eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
    Linux agpgart interface v0.103
    agpgart: Detected an Intel 440BX Chipset.
    agpgart: AGP aperture is 64M @ 0xf4000000
    [drm] Initialized drm 1.1.0 20060810
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    [drm] Initialized r128 2.5.0 20030725 on minor 0
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    fuse init (API version 7.9)
    Marking TSC unstable due to: cpufreq changes.
    /proc/exmap: insert
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input5
    ACPI: Sleep Button (CM) [SLPB]
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: Processor [CPU] (supports 8 throttling states)
    Clocksource tsc unstable (delta = 142862014 ns)
    ACPI: LNXTHERM:01 is registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (49 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Yenta: ISA IRQ mask 0x0038, PCI irq 11
    Socket status: 30000020
    Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x0038, PCI irq 9
    Socket status: 30000006
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Yenta: CardBus bridge found at 0000:08:02.0 [1014:0148]
    PCI: Bus 9, cardbus bridge: 0000:08:02.0
    IO window: 0x00004000-0x000040ff
    IO window: 0x00004400-0x000044ff
    PREFETCH window: 0x40400000-0x407fffff
    MEM window: 0x40800000-0x40bfffff
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:08:02.0, mfunc 0x00001002, devctl 0x66
    irq 11: nobody cared (try booting with the "irqpoll" option)
    Pid: 1799, comm: modprobe Tainted: P 2.6.26-ARCH #1
    [<c015a764>] __report_bad_irq+0x24/0x90
    [<c015aa52>] note_interrupt+0x282/0x2c0
    [<c0159e70>] handle_IRQ_event+0x30/0x60
    [<c015b2c3>] handle_level_irq+0xd3/0x100
    [<c010712b>] do_IRQ+0x3b/0x70
    [<c01049c7>] common_interrupt+0x23/0x28
    [<c0159e57>] handle_IRQ_event+0x17/0x60
    [<c015b26d>] handle_level_irq+0x7d/0x100
    [<c010712b>] do_IRQ+0x3b/0x70
    [<c01049c7>] common_interrupt+0x23/0x28
    [<c015007b>] show_initstate+0xb/0x50
    [<e0bd4830>] yenta_probe_cb_irq+0x80/0xf0 [yenta_socket]
    [<e0bd4bbb>] ti12xx_override+0x23b/0x6a0 [yenta_socket]
    [<c0210ce3>] pci_setup_cardbus+0x103/0x190
    [<e0bd5f02>] yenta_probe+0x5f2/0x643 [yenta_socket]
    [<c01cfa11>] sysfs_find_dirent+0x21/0x30
    [<c01d09c5>] sysfs_create_link+0x85/0x120
    [<c020b700>] pci_match_device+0xa0/0xc0
    [<c020b816>] pci_device_probe+0x56/0x80
    [<c026a9a6>] driver_probe_device+0x86/0x1a0
    [<c026ab31>] __driver_attach+0x71/0x80
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026a2d4>] bus_for_each_dev+0x44/0x70
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026a836>] driver_attach+0x16/0x20
    [<c026aac0>] __driver_attach+0x0/0x80
    [<c0269c67>] bus_add_driver+0x1a7/0x220
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026accc>] driver_register+0x5c/0x130
    [<c020ba4d>] __pci_register_driver+0x3d/0x80
    [<c0150738>] sys_init_module+0x148/0x1ca0
    [<c01a4bfa>] seq_open+0x3a/0x90
    [<c01c2aa6>] pde_users_dec+0x16/0x50
    [<e0bc9000>] hotplug_slot_attr_show+0x0/0x30 [pci_hotplug]
    [<c0268610>] device_remove_file+0x0/0x20
    [<c0103f73>] sysenter_past_esp+0x78/0xb1
    =======================
    handlers:
    [<e0a5f340>] (snd_cs46xx_interrupt+0x0/0x1e0 [snd_cs46xx])
    [<e0bd57e0>] (yenta_interrupt+0x0/0xe0 [yenta_socket])
    Disabling IRQ #11
    pccard: CardBus card inserted into slot 0
    ath_pci 0000:0f:00.0: enabling device (0000 -> 0002)
    ACPI: PCI Interrupt 0000:0f:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    input: PC Speaker as /class/input/input6
    USB Universal Host Controller Interface driver v3.0
    input: Video Bus as /class/input/input7
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /class/input/input8
    PPP generic driver version 2.4.2
    Uniform Multi-Platform E-IDE driver
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    parport_pc 00:0d: activated
    parport_pc 00:0d: reported by Plug and Play ACPI
    parport0: PC-style at 0x278, irq 5 [PCSPP,TRISTATE]
    MadWifi: ath_attach: Switching rfkill capability off.
    NET: Registered protocol family 23
    wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
    nsc-ircc 00:0e: activated
    nsc-ircc, chip->init
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=11
    IrDA: Registered device irda0
    nsc-ircc, Found dongle: Reserved
    ppdev: user-space parallel port driver
    Yenta: ISA IRQ mask 0x0018, PCI irq 10
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
    cs: IO port probe 0x4000-0x4fff: clean.
    Yenta: CardBus bridge found at 0000:08:02.1 [1014:0148]
    PCI: Bus 13, cardbus bridge: 0000:08:02.1
    IO window: 0x00004800-0x000048ff
    IO window: 0x00004c00-0x00004cff
    PREFETCH window: 0x40c00000-0x40ffffff
    MEM window: 0x41000000-0x413fffff
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:08:02.1, mfunc 0x00001002, devctl 0x66
    irq 11: nobody cared (try booting with the "irqpoll" option)
    Pid: 1799, comm: modprobe Tainted: P 2.6.26-ARCH #1
    [<c015a764>] __report_bad_irq+0x24/0x90
    [<c015aa52>] note_interrupt+0x282/0x2c0
    [<c0159e70>] handle_IRQ_event+0x30/0x60
    [<c015b2c3>] handle_level_irq+0xd3/0x100
    [<c010712b>] do_IRQ+0x3b/0x70
    [<c01049c7>] common_interrupt+0x23/0x28
    [<c014007b>] set_process_cpu_timer+0x2b/0xd0
    [<c0159e57>] handle_IRQ_event+0x17/0x60
    [<c015b26d>] handle_level_irq+0x7d/0x100
    [<c010712b>] do_IRQ+0x3b/0x70
    [<c01049c7>] common_interrupt+0x23/0x28
    [<c015007b>] show_initstate+0xb/0x50
    [<e0bd4830>] yenta_probe_cb_irq+0x80/0xf0 [yenta_socket]
    [<e0bd4aff>] ti12xx_override+0x17f/0x6a0 [yenta_socket]
    [<c0210ce3>] pci_setup_cardbus+0x103/0x190
    [<e0bd5f02>] yenta_probe+0x5f2/0x643 [yenta_socket]
    [<c01cfa11>] sysfs_find_dirent+0x21/0x30
    [<c01d09c5>] sysfs_create_link+0x85/0x120
    [<c020b700>] pci_match_device+0xa0/0xc0
    [<c020b816>] pci_device_probe+0x56/0x80
    [<c026a9a6>] driver_probe_device+0x86/0x1a0
    [<c026ab31>] __driver_attach+0x71/0x80
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026a2d4>] bus_for_each_dev+0x44/0x70
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026a836>] driver_attach+0x16/0x20
    [<c026aac0>] __driver_attach+0x0/0x80
    [<c0269c67>] bus_add_driver+0x1a7/0x220
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026accc>] driver_register+0x5c/0x130
    [<c020ba4d>] __pci_register_driver+0x3d/0x80
    [<c0150738>] sys_init_module+0x148/0x1ca0
    [<c01a4bfa>] seq_open+0x3a/0x90
    [<c01c2aa6>] pde_users_dec+0x16/0x50
    [<e0bc9000>] hotplug_slot_attr_show+0x0/0x30 [pci_hotplug]
    [<c0268610>] device_remove_file+0x0/0x20
    [<c0103f73>] sysenter_past_esp+0x78/0xb1
    =======================
    handlers:
    [<e0a5f340>] (snd_cs46xx_interrupt+0x0/0x1e0 [snd_cs46xx])
    [<e0bd57e0>] (yenta_interrupt+0x0/0xe0 [yenta_socket])
    [<e0ae4e30>] (ath_intr+0x0/0x4810 [ath_pci])
    Disabling IRQ #11
    Yenta: ISA IRQ mask 0x0018, PCI irq 10
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
    cs: IO port probe 0x4000-0x4fff: clean.
    ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
    uhci_hcd 0000:00:07.2: UHCI Host Controller
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:07.2: irq 7, io base 0x00001860
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
    piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
    piix4_smbus: probe of 0000:00:07.3 failed with error -1
    CMD648: IDE controller (0x1095:0x0648 rev 0x01) at PCI slot 0000:08:01.0
    ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    CMD648: 100% native mode on irq 9
    ide0: BM-DMA at 0x3000-0x3007
    ide1: BM-DMA at 0x3008-0x300f
    Probing IDE interface ide0...
    usb 1-1: new full speed USB device using uhci_hcd and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    hub 1-1:1.0: USB hub found
    hub 1-1:1.0: 4 ports detected
    Probing IDE interface ide1...
    usb 1-1.4: new low speed USB device using uhci_hcd and address 3
    usb 1-1.4: configuration #1 chosen from 1 choice
    ide0 at 0x3020-0x3027,0x3016 on irq 9
    ide1 at 0x3018-0x301f,0x3012 on irq 9
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    lp0: using parport0 (interrupt-driven).
    usbcore: registered new interface driver hiddev
    input: Logitech Logitech USB Optical Mouse as /class/input/input9
    input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1.4
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    JFS: nTxBlock = 4027, nTxLock = 32219
    Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
    warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    conservative governor failed, too long transition latency of HW, fallback to performance governor
    thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
    For comparison here is my dockless dmesg:
    Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008
    PAT disabled. Not yet verified on this CPU type.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
    BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    Entering add_active_range(0, 0, 131056) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 131056
    HighMem 131056 -> 131056
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 131056
    On node 0 totalpages: 131056
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 992 pages used for memmap
    Normal zone: 125968 pages, LIFO batch:31
    HighMem zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    DMI 2.3 present.
    ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
    ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
    ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
    ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
    ACPI: FACS 1FFFF000, 0040
    ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    ACPI: PM-Timer IO Port: 0x1008
    Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    SMP: Allowing 0 CPUs, 0 hotplug CPUs
    PERCPU: Allocating 39464 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130032
    Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
    ACPI: Added _OSI(Linux)
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (0140e000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    Detected 697.425 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 514452k/524224k available (2120k kernel code, 9264k reserved, 744k data, 264k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee4000 - 0xfffff000 (1132 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    .init : 0xc03d3000 - 0xc0415000 ( 264 kB)
    .data : 0xc031225e - 0xc03cc380 ( 744 kB)
    .text : 0xc0100000 - 0xc031225e (2120 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay using timer specific routine.. 1396.15 BogoMIPS (lpj=2326640)
    Security Framework initialized
    Capability LSM initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080321
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0a20)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (1396.15 BogoMIPS).
    net_namespace: 652 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
    PCI: Using configuration type 1 for base access
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
    pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
    pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
    pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
    pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11)
    ACPI: Power Resource [PSER] (off)
    ACPI: Power Resource [PSIO] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
    PCI: setting IRQ 5 as level-triggered
    ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
    PCI: setting IRQ 9 as level-triggered
    ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
    ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
    system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x103f has been reserved
    system 00:02: ioport range 0x1040-0x104f has been reserved
    system 00:02: ioport range 0xfe00-0xfe0f has been reserved
    system 00:09: ioport range 0x15e0-0x15ef has been reserved
    PCI: Bridge: 0000:00:01.0
    IO window: 2000-2fff
    MEM window: 0xf0200000-0xf02fffff
    PREFETCH window: 0x00000000f8000000-0x00000000fbffffff
    PCI: Bus 2, cardbus bridge: 0000:00:02.0
    IO window: 0x00001400-0x000014ff
    IO window: 0x00001c00-0x00001cff
    PREFETCH window: 0x30000000-0x33ffffff
    MEM window: 0x34000000-0x37ffffff
    PCI: Bus 6, cardbus bridge: 0000:00:02.1
    IO window: 0x00003000-0x000030ff
    IO window: 0x00003400-0x000034ff
    PREFETCH window: 0x38000000-0x3bffffff
    MEM window: 0x3c000000-0x3fffffff
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 662k freed
    Simple Boot Flag at 0x35 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1006
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
    pci 0000:01:00.0: Boot video device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial 00:0c: activated
    00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 264k freed
    input: AT Translated Set 2 keyboard as /class/input/input1
    Switched to high resolution mode on CPU 0
    ACPI: ACPI Dock Station Driver
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:07.1: version 2.12
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
    ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
    ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
    ata1.00: 195371568 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/33
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda:<4>Driver 'sr' needs updating - please use bus_type methods
    sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ReiserFS: sda2: found reiserfs format "3.6" with standard journal
    ReiserFS: sda2: using ordered data mode
    ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda2: checking transaction log (sda2)
    ReiserFS: sda2: Using r5 hash to sort names
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    Non-volatile memory driver v1.2
    thinkpad_acpi: ThinkPad ACPI Extras v0.20
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
    Registered led device: tpacpi::thinklight
    thinkpad_acpi: another device driver is already handling bay events
    thinkpad_acpi: disabling subdriver bay
    Registered led device: tpacpi::power
    Registered led device: tpacpi:orange:batt
    Registered led device: tpacpi:green:batt
    Registered led device: tpacpi::dock_active
    Registered led device: tpacpi::bay_active
    Registered led device: tpacpi::dock_batt
    Registered led device: tpacpi::unknown_led
    Registered led device: tpacpi::standby
    input: ThinkPad Extra Buttons as /class/input/input2
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
    e100: eth0: e100_probe: addr 0xf0120000, irq 9, MAC addr 00:03:47:0f:de:3d
    eepro100.c:v1.09j-t 9/29/99 Donald Becker
    eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
    Linux agpgart interface v0.103
    agpgart: Detected an Intel 440BX Chipset.
    agpgart: AGP aperture is 64M @ 0xf4000000
    [drm] Initialized drm 1.1.0 20060810
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    [drm] Initialized r128 2.5.0 20030725 on minor 0
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    fuse init (API version 7.9)
    Marking TSC unstable due to: cpufreq changes.
    /proc/exmap: insert
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input5
    ACPI: Sleep Button (CM) [SLPB]
    Clocksource tsc unstable (delta = 142842086 ns)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: Processor [CPU] (supports 8 throttling states)
    ACPI: LNXTHERM:01 is registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (50 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
    spurious 8259A interrupt: IRQ7.
    Yenta: ISA IRQ mask 0x0498, PCI irq 11
    Socket status: 30000020
    Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x0498, PCI irq 5
    Socket status: 30000006
    pccard: CardBus card inserted into slot 0
    ath_pci 0000:02:00.0: enabling device (0000 -> 0002)
    ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    input: PC Speaker as /class/input/input6
    piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
    piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
    piix4_smbus: probe of 0000:00:07.3 failed with error -1
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
    uhci_hcd 0000:00:07.2: UHCI Host Controller
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:07.2: irq 5, io base 0x00001860
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    input: Video Bus as /class/input/input7
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /class/input/input8
    PPP generic driver version 2.4.2
    parport_pc 00:0d: activated
    parport_pc 00:0d: reported by Plug and Play ACPI
    parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
    NET: Registered protocol family 23
    nsc-ircc 00:0e: activated
    nsc-ircc, chip->init
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    IrDA: Registered device irda0
    nsc-ircc, Found dongle: Reserved
    MadWifi: ath_attach: Switching rfkill capability off.
    wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
    ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=11
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    lp0: using parport0 (interrupt-driven).
    ppdev: user-space parallel port driver
    JFS: nTxBlock = 4027, nTxLock = 32219
    Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
    warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    conservative governor failed, too long transition latency of HW, fallback to performance governor
    thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
    I've tried multiple options in the BIOS. You can select AGP or PCI as the card for the root display device. The default is PCI so if there's a docked PCI card at POST, the BIOS will use that for the root display device... otherwise it will use the built in card. You can also select the root display device as LCD or CRT or both. The default is CRT so if there is an external monitor that's where the bootloader menu and such will appear, otherwise the laptop's own display gets used. Even if I've understood these incorrectly, all combinations yield a PCI video card that is not detected by lspci.
    I've also tried loading the module dock right after thinkpad_acpi. It loads and appears in lsmod but it doesn't help the situation at all. It also doesn't add a dock file to /proc/acpi/ibm. I also tried passing pci=routirq to the kernel, whatever that does and I've tried changing the four PCI related IRQ numbers in the BIOS and this has not helped.

    I did upgrade the kernel yesterday and it caused the syntax of dmesg to change somewhat. Here is a docked dmesg from 2.6.27:
    Linux version 2.6.27-ARCH (root@architect) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sun Oct 12 15:16:25 CEST 2008
    PAT WC disabled due to known CPU erratum.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
    BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    last_pfn = 0x1fff0 max_arch_pfn = 0x100000
    kernel direct mapping tables up to 1fff0000 @ 7000-d000
    RAMDISK: 00e4d000 - 00effb5b
    DMI 2.3 present.
    ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
    ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
    ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
    ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
    ACPI: FACS 1FFFF000, 0040
    ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    mapped low ram: 0 - 1fff0000
    low ram: 00000000 - 1fff0000
    bootmap 00002000 - 00006000
    (9 early reservations) ==> bootmem [0000000000 - 001fff0000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0000100000 - 000050c280] TEXT DATA BSS ==> [0000100000 - 000050c280]
    #4 [0000e4d000 - 0000effb5b] RAMDISK ==> [0000e4d000 - 0000effb5b]
    #5 [000050d000 - 0000510000] INIT_PG_TABLE ==> [000050d000 - 0000510000]
    #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
    #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
    #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x0001fff0
    HighMem 0x0001fff0 -> 0x0001fff0
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0001fff0
    On node 0 totalpages: 130959
    free_area_init_node: node 0, pgdat c03d9580, node_mem_map c1000000
    DMA zone: 3967 pages, LIFO batch:0
    Normal zone: 125968 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (01402000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
    PERCPU: Allocating 39324 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935
    Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
    ACPI: Added _OSI(Linux)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    TSC: PIT calibration confirmed by PMTIMER.
    TSC: using PIT calibration value
    Detected 697.407 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 514248k/524224k available (2151k kernel code, 9460k reserved, 844k data, 288k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    .init : 0xc03f3000 - 0xc043b000 ( 288 kB)
    .data : 0xc0319f76 - 0xc03ed360 ( 844 kB)
    .text : 0xc0100000 - 0xc0319f76 (2151 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay loop (skipped), value calculated using timer frequency.. 1395.93 BogoMIPS (lpj=2324690)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080609
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0e00)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (1395.93 BogoMIPS).
    net_namespace: 832 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14
    PCI: Using configuration type 1 for base access
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: 0000:00:00.0 reg 10 32bit mmio: [f4000000, f7ffffff]
    PCI: 0000:00:02.0 reg 10 32bit mmio: [50000000, 50000fff]
    pci 0000:00:02.0: supports D1
    pci 0000:00:02.0: supports D2
    pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.0: PME# disabled
    PCI: 0000:00:02.1 reg 10 32bit mmio: [50100000, 50100fff]
    pci 0000:00:02.1: supports D1
    pci 0000:00:02.1: supports D2
    pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.1: PME# disabled
    PCI: 0000:00:03.0 reg 10 32bit mmio: [f0120000, f0120fff]
    PCI: 0000:00:03.0 reg 14 io port: [1800, 183f]
    PCI: 0000:00:03.0 reg 18 32bit mmio: [f0100000, f011ffff]
    PCI: 0000:00:03.0 reg 30 32bit mmio: [0, fffff]
    pci 0000:00:03.0: supports D1
    pci 0000:00:03.0: supports D2
    pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:03.0: PME# disabled
    PCI: 0000:00:03.1 reg 10 io port: [1840, 1847]
    PCI: 0000:00:03.1 reg 14 32bit mmio: [f0121000, f0121fff]
    pci 0000:00:03.1: supports D1
    pci 0000:00:03.1: supports D2
    pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:03.1: PME# disabled
    pci 0000:00:04.0: supports D1
    pci 0000:00:04.0: supports D2
    PCI: 0000:00:05.0 reg 10 32bit mmio: [f0122000, f0122fff]
    PCI: 0000:00:05.0 reg 14 32bit mmio: [f0000000, f00fffff]
    pci 0000:00:05.0: supports D1
    pci 0000:00:05.0: supports D2
    PCI: 0000:00:07.1 reg 20 io port: [1850, 185f]
    PCI: 0000:00:07.2 reg 20 io port: [1860, 187f]
    pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
    pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
    pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
    pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
    pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
    PCI: 0000:01:00.0 reg 10 32bit mmio: [f8000000, fbffffff]
    PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff]
    PCI: 0000:01:00.0 reg 18 32bit mmio: [f0200000, f0203fff]
    PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
    pci 0000:01:00.0: supports D1
    pci 0000:01:00.0: supports D2
    PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
    PCI: bridge 0000:00:01.0 32bit mmio: [f0200000, f02fffff]
    PCI: bridge 0000:00:01.0 32bit mmio pref: [f8000000, fbffffff]
    PCI: 0000:08:01.0 reg 10 io port: [3020, 3027]
    PCI: 0000:08:01.0 reg 14 io port: [3014, 3017]
    PCI: 0000:08:01.0 reg 18 io port: [3018, 301f]
    PCI: 0000:08:01.0 reg 1c io port: [3010, 3013]
    PCI: 0000:08:01.0 reg 20 io port: [3000, 300f]
    pci 0000:08:01.0: supports D1
    pci 0000:08:01.0: supports D2
    PCI: 0000:08:02.0 reg 10 32bit mmio: [52000000, 52000fff]
    pci 0000:08:02.0: supports D1
    pci 0000:08:02.0: supports D2
    pci 0000:08:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:08:02.0: PME# disabled
    PCI: 0000:08:02.1 reg 10 32bit mmio: [53000000, 53000fff]
    pci 0000:08:02.1: supports D1
    pci 0000:08:02.1: supports D2
    pci 0000:08:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:08:02.1: PME# disabled
    pci 0000:00:04.0: transparent bridge
    PCI: bridge 0000:00:04.0 io port: [0, fff]
    PCI: bridge 0000:00:04.0 32bit mmio: [0, fffff]
    PCI: bridge 0000:00:04.0 32bit mmio pref: [0, fffff]
    bus 00 -> node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DOCK._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
    ACPI: Power Resource [PSER] (off)
    ACPI: Power Resource [PSIO] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:02: io resource (0x22-0x22) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:02: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:02: io resource (0xb2-0xb3) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:0a: io resource (0x2e-0x2f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
    PCI: setting IRQ 9 as level-triggered
    pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
    pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    pci 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
    pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:08:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:08:02.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:04.0: BAR 7: can't allocate resource
    pci 0000:00:04.0: BAR 8: can't allocate resource
    pci 0000:00:04.0: BAR 9: can't allocate resource
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
    system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x103f has been reserved
    system 00:02: ioport range 0x1040-0x104f has been reserved
    system 00:02: ioport range 0xfe00-0xfe0f has been reserved
    system 00:09: ioport range 0x15e0-0x15ef has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x2000-0x2fff
    pci 0000:00:01.0: MEM window: 0xf0200000-0xf02fffff
    pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff
    pci 0000:00:02.0: CardBus bridge, secondary bus 0000:0f
    pci 0000:00:02.0: IO window: 0x001400-0x0014ff
    pci 0000:00:02.0: IO window: 0x001c00-0x001cff
    pci 0000:00:02.0: PREFETCH window: 0x30000000-0x33ffffff
    pci 0000:00:02.0: MEM window: 0x34000000-0x37ffffff
    pci 0000:00:02.1: CardBus bridge, secondary bus 0000:13
    pci 0000:00:02.1: IO window: 0x003400-0x0034ff
    pci 0000:00:02.1: IO window: 0x003800-0x0038ff
    pci 0000:00:02.1: PREFETCH window: 0x38000000-0x3bffffff
    pci 0000:00:02.1: MEM window: 0x3c000000-0x3fffffff
    pci 0000:08:02.0: CardBus bridge, secondary bus 0000:09
    pci 0000:08:02.0: IO window: 0x004000-0x0040ff
    pci 0000:08:02.0: IO window: 0x004400-0x0044ff
    pci 0000:08:02.0: PREFETCH window: 0x48000000-0x4bffffff
    pci 0000:08:02.0: MEM window: 0x40000000-0x43ffffff
    pci 0000:08:02.1: CardBus bridge, secondary bus 0000:0d
    pci 0000:08:02.1: IO window: 0x004800-0x0048ff
    pci 0000:08:02.1: IO window: 0x004c00-0x004cff
    pci 0000:08:02.1: PREFETCH window: 0x4c000000-0x4fffffff
    pci 0000:08:02.1: MEM window: 0x44000000-0x47ffffff
    pci 0000:00:04.0: PCI bridge, secondary bus 0000:08
    pci 0000:00:04.0: IO window: 0x4000-0x4fff
    pci 0000:00:04.0: MEM window: 0x40000000-0x47ffffff
    pci 0000:00:04.0: PREFETCH window: 0x00000048000000-0x0000004fffffff
    pci 0000:00:02.0: power state changed by ACPI to D0
    pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:00:02.1: power state changed by ACPI to D0
    pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:08:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:08:02.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    bus: 00 index 0 io port: [0, ffff]
    bus: 00 index 1 mmio: [0, ffffffff]
    bus: 01 index 0 io port: [2000, 2fff]
    bus: 01 index 1 mmio: [f0200000, f02fffff]
    bus: 01 index 2 mmio: [f8000000, fbffffff]
    bus: 01 index 3 mmio: [0, 0]
    bus: 0f index 0 io port: [1400, 14ff]
    bus: 0f index 1 io port: [1c00, 1cff]
    bus: 0f index 2 mmio: [30000000, 33ffffff]
    bus: 0f index 3 mmio: [34000000, 37ffffff]
    bus: 13 index 0 io port: [3400, 34ff]
    bus: 13 index 1 io port: [3800, 38ff]
    bus: 13 index 2 mmio: [38000000, 3bffffff]
    bus: 13 index 3 mmio: [3c000000, 3fffffff]
    bus: 08 index 0 io port: [4000, 4fff]
    bus: 08 index 1 mmio: [40000000, 47ffffff]
    bus: 08 index 2 mmio: [48000000, 4fffffff]
    bus: 08 index 3 io port: [0, ffff]
    bus: 08 index 4 mmio: [0, ffffffff]
    bus: 09 index 0 io port: [4000, 40ff]
    bus: 09 index 1 io port: [4400, 44ff]
    bus: 09 index 2 mmio: [48000000, 4bffffff]
    bus: 09 index 3 mmio: [40000000, 43ffffff]
    bus: 0d index 0 io port: [4800, 48ff]
    bus: 0d index 1 io port: [4c00, 4cff]
    bus: 0d index 2 mmio: [4c000000, 4fffffff]
    bus: 0d index 3 mmio: [44000000, 47ffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 714k freed
    Simple Boot Flag at 0x35 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1006
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
    pci 0000:01:00.0: Boot video device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver4 ports, IRQ sharing disabled
    serial 00:0c: activated
    00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 288k freed
    Switched to high resolution mode on CPU 0
    input: AT Translated Set 2 keyboard as /class/input/input1
    ACPI: ACPI Dock Station Driver
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:07.1: version 2.12
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
    ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
    ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
    ata1.00: 195371568 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/33
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
    pata_acpi 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    pata_acpi 0000:08:01.0: PCI INT A disabled
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    Driver 'sr' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ReiserFS: sda2: found reiserfs format "3.6" with standard journal
    ReiserFS: sda2: using ordered data mode
    ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda2: checking transaction log (sda2)
    ReiserFS: sda2: Using r5 hash to sort names
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    Non-volatile memory driver v1.2
    thinkpad_acpi: ThinkPad ACPI Extras v0.21
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
    Registered led device: tpacpi::thinklight
    thinkpad_acpi: another device driver is already handling bay events
    thinkpad_acpi: disabling subdriver bay
    Registered led device: tpacpi::power
    Registered led device: tpacpi:orange:batt
    Registered led device: tpacpi:green:batt
    Registered led device: tpacpi::dock_active
    Registered led device: tpacpi::bay_active
    Registered led device: tpacpi::dock_batt
    Registered led device: tpacpi::unknown_led
    Registered led device: tpacpi::standby
    input: ThinkPad Extra Buttons as /class/input/input2
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    e100 0000:00:03.0: PME# disabled
    e100: eth0: e100_probe: addr 0xf0120000, irq 11, MAC addr 00:03:47:0f:de:3d
    eepro100.c:v1.09j-t 9/29/99 Donald Becker
    eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
    Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
    Linux agpgart interface v0.103
    agpgart-intel 0000:00:00.0: Intel 440BX Chipset
    agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
    [drm] Initialized drm 1.1.0 20060810
    pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    [drm] Initialized r128 2.5.0 20030725 on minor 0
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    fuse init (API version 7.9)
    Marking TSC unstable due to cpufreq changes
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input5
    ACPI: Sleep Button (CM) [SLPB]
    Clocksource tsc unstable (delta = 142865538 ns)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI0007:00: registered as cooling_device0
    ACPI: Processor [CPU] (supports 8 throttling states)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (24 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x00b8, PCI irq 9
    Socket status: 30000020
    Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x00b8, PCI irq 9
    Socket status: 30000006
    Yenta: CardBus bridge found at 0000:08:02.0 [1014:0148]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:08:02.0, mfunc 0x00001002, devctl 0x66
    irq 9: nobody cared (try booting with the "irqpoll" option)
    Pid: 1302, comm: modprobe Tainted: P 2.6.27-ARCH #1
    [<c015ce54>] __report_bad_irq+0x24/0x90
    [<c015d142>] note_interrupt+0x282/0x2c0
    [<c015c450>] handle_IRQ_event+0x30/0x60
    [<c015d9b3>] handle_level_irq+0xd3/0x100
    [<c010710b>] do_IRQ+0x3b/0x70
    [<c0104927>] common_interrupt+0x23/0x28
    [<c03100d8>] cache_add_dev+0x272/0x44a
    [<c015c430>] handle_IRQ_event+0x10/0x60
    [<c015d95d>] handle_level_irq+0x7d/0x100
    [<c010710b>] do_IRQ+0x3b/0x70
    [<c015cbc1>] setup_irq+0x121/0x250
    [<c0104927>] common_interrupt+0x23/0x28
    [<c015007b>] rt_mutex_adjust_prio_chain+0x20b/0x340
    [<e0c168cc>] yenta_probe_cb_irq+0x9c/0x110 [yenta_socket]
    [<e0c16c58>] ti12xx_override+0x238/0x6a0 [yenta_socket]
    [<e0c17fe2>] yenta_probe+0x622/0x673 [yenta_socket]
    [<c01d4012>] sysfs_add_one+0x12/0x50
    [<c01d40bd>] sysfs_addrm_start+0x6d/0xc0
    [<c0318f05>] _spin_unlock+0x5/0x20
    [<c020bce0>] pci_match_device+0xa0/0xc0
    [<c020c4b6>] pci_device_probe+0x56/0x80
    [<c026da76>] driver_probe_device+0x86/0x1a0
    [<c0318af4>] _spin_lock_irqsave+0x34/0x50
    [<c026dc01>] __driver_attach+0x71/0x80
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026d3a4>] bus_for_each_dev+0x44/0x70
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026d906>] driver_attach+0x16/0x20
    [<c026db90>] __driver_attach+0x0/0x80
    [<c026cd37>] bus_add_driver+0x1a7/0x220
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026dd9c>] driver_register+0x5c/0x130
    [<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
    [<c020c6f7>] __pci_register_driver+0x47/0x90
    [<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
    [<c010111a>] do_one_initcall+0x2a/0x160
    [<c0123480>] hrtick_start_fair+0x190/0x1b0
    [<c0126635>] check_preempt_wakeup+0xe5/0x120
    [<c0126def>] try_to_wake_up+0xaf/0x180
    [<c015474b>] sys_init_module+0x8b/0x1b0
    [<c0103ef3>] sysenter_do_call+0x12/0x33
    =======================
    handlers:
    [<c0229cfc>] (acpi_irq+0x0/0x1f)
    [<e0a663c0>] (snd_cs46xx_interrupt+0x0/0x1f0 [snd_cs46xx])
    [<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
    [<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
    Disabling IRQ #9
    pccard: CardBus card inserted into slot 0
    PCI: 0000:0f:00.0 reg 10 32bit mmio: [0, ffff]
    ath_pci 0000:0f:00.0: enabling device (0000 -> 0002)
    ath_pci 0000:0f:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    input: PC Speaker as /class/input/input6
    USB Universal Host Controller Interface driver v3.0
    input: Video Bus as /class/input/input7
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    Error: Driver 'pcspkr' is already registered, aborting...
    NET: Registered protocol family 23
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /class/input/input8
    parport_pc 00:0d: activated
    parport_pc 00:0d: reported by Plug and Play ACPI
    parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
    nsc-ircc 00:0e: activated
    nsc-ircc, chip->init
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    IrDA: Registered device irda0
    nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
    PPP generic driver version 2.4.2
    Uniform Multi-Platform E-IDE driver
    MadWifi: ath_attach: Switching rfkill capability off.
    wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
    ppdev: user-space parallel port driver
    ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=9
    Yenta: ISA IRQ mask 0x0038, PCI irq 11
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
    cs: IO port probe 0x4000-0x4fff: clean.
    pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
    pcmcia: parent PCI bridge Memory window: 0x48000000 - 0x4fffffff
    cmd64x 0000:08:01.0: IDE controller (0x1095:0x0648 rev 0x01)
    CMD64x_IDE 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    cmd64x 0000:08:01.0: 100% native mode on irq 9
    ide0: BM-DMA at 0x3000-0x3007
    ide1: BM-DMA at 0x3008-0x300f
    Probing IDE interface ide0...
    Probing IDE interface ide1...
    ide0 at 0x3020-0x3027,0x3016 on irq 9
    ide1 at 0x3018-0x301f,0x3012 on irq 9
    piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
    piix4_smbus: probe of 0000:00:07.3 failed with error -1
    Yenta: CardBus bridge found at 0000:08:02.1 [1014:0148]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:08:02.1, mfunc 0x00001002, devctl 0x66
    irq 9: nobody cared (try booting with the "irqpoll" option)
    Pid: 1302, comm: modprobe Tainted: P 2.6.27-ARCH #1
    [<c015ce54>] __report_bad_irq+0x24/0x90
    [<c015d142>] note_interrupt+0x282/0x2c0
    [<c015c450>] handle_IRQ_event+0x30/0x60
    [<c015d9b3>] handle_level_irq+0xd3/0x100
    [<c010710b>] do_IRQ+0x3b/0x70
    [<c0104927>] common_interrupt+0x23/0x28
    [<c031007b>] cache_add_dev+0x215/0x44a
    [<c03100d8>] cache_add_dev+0x272/0x44a
    [<c015c430>] handle_IRQ_event+0x10/0x60
    [<c015d95d>] handle_level_irq+0x7d/0x100
    [<c010710b>] do_IRQ+0x3b/0x70
    [<c015cbc1>] setup_irq+0x121/0x250
    [<c0104927>] common_interrupt+0x23/0x28
    [<c015007b>] rt_mutex_adjust_prio_chain+0x20b/0x340
    [<e0c168cc>] yenta_probe_cb_irq+0x9c/0x110 [yenta_socket]
    [<e0c16b97>] ti12xx_override+0x177/0x6a0 [yenta_socket]
    [<e0c17fe2>] yenta_probe+0x622/0x673 [yenta_socket]
    [<c01d4012>] sysfs_add_one+0x12/0x50
    [<c01d40bd>] sysfs_addrm_start+0x6d/0xc0
    [<c0318f05>] _spin_unlock+0x5/0x20
    [<c020bce0>] pci_match_device+0xa0/0xc0
    [<c020c4b6>] pci_device_probe+0x56/0x80
    [<c026da76>] driver_probe_device+0x86/0x1a0
    [<c0318af4>] _spin_lock_irqsave+0x34/0x50
    [<c026dc01>] __driver_attach+0x71/0x80
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026d3a4>] bus_for_each_dev+0x44/0x70
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026d906>] driver_attach+0x16/0x20
    [<c026db90>] __driver_attach+0x0/0x80
    [<c026cd37>] bus_add_driver+0x1a7/0x220
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026dd9c>] driver_register+0x5c/0x130
    [<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
    [<c020c6f7>] __pci_register_driver+0x47/0x90
    [<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
    [<c010111a>] do_one_initcall+0x2a/0x160
    [<c0123480>] hrtick_start_fair+0x190/0x1b0
    [<c0126635>] check_preempt_wakeup+0xe5/0x120
    [<c0126def>] try_to_wake_up+0xaf/0x180
    [<c015474b>] sys_init_module+0x8b/0x1b0
    [<c0103ef3>] sysenter_do_call+0x12/0x33
    =======================
    handlers:
    [<c0229cfc>] (acpi_irq+0x0/0x1f)
    [<e0a663c0>] (snd_cs46xx_interrupt+0x0/0x1f0 [snd_cs46xx])
    [<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
    [<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
    [<e0b3fdf0>] (ath_intr+0x0/0x4880 [ath_pci])
    [<e0cf28a0>] (ide_intr+0x0/0x220 [ide_core])
    [<e0cf28a0>] (ide_intr+0x0/0x220 [ide_core])
    Disabling IRQ #9
    Yenta: ISA IRQ mask 0x0038, PCI irq 11
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
    cs: IO port probe 0x4000-0x4fff: clean.
    pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
    pcmcia: parent PCI bridge Memory window: 0x48000000 - 0x4fffffff
    uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:07.2: UHCI Host Controller
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:07.2: irq 10, io base 0x00001860
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    usb 1-1: new full speed USB device using uhci_hcd and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    hub 1-1:1.0: USB hub found
    hub 1-1:1.0: 4 ports detected
    lp0: using parport0 (interrupt-driven).
    usb 1-1.4: new low speed USB device using uhci_hcd and address 3
    usb 1-1.4: configuration #1 chosen from 1 choice
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    usbcore: registered new interface driver hiddev
    input: Logitech Logitech USB Optical Mouse as /class/input/input9
    input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1.4
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    ACPI: EC: missing confirmations, switch off interrupt mode.
    JFS: nTxBlock = 4026, nTxLock = 32211
    Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
    warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    conservative governor failed, too long transition latency of HW, fallback to performance governor
    thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
    Note the "can't allocate resource areas"... And here is the new dockless dmesg:
    Linux version 2.6.27-ARCH (root@architect) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sun Oct 12 15:16:25 CEST 2008
    PAT WC disabled due to known CPU erratum.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
    BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    last_pfn = 0x1fff0 max_arch_pfn = 0x100000
    kernel direct mapping tables up to 1fff0000 @ 7000-d000
    RAMDISK: 00e4d000 - 00effb5b
    DMI 2.3 present.
    ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
    ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
    ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
    ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
    ACPI: FACS 1FFFF000, 0040
    ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    mapped low ram: 0 - 1fff0000
    low ram: 00000000 - 1fff0000
    bootmap 00002000 - 00006000
    (9 early reservations) ==> bootmem [0000000000 - 001fff0000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0000100000 - 000050c280] TEXT DATA BSS ==> [0000100000 - 000050c280]
    #4 [0000e4d000 - 0000effb5b] RAMDISK ==> [0000e4d000 - 0000effb5b]
    #5 [000050d000 - 0000510000] INIT_PG_TABLE ==> [000050d000 - 0000510000]
    #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
    #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
    #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x0001fff0
    HighMem 0x0001fff0 -> 0x0001fff0
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0001fff0
    On node 0 totalpages: 130959
    free_area_init_node: node 0, pgdat c03d9580, node_mem_map c1000000
    DMA zone: 3967 pages, LIFO batch:0
    Normal zone: 125968 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (01402000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
    PERCPU: Allocating 39324 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935
    Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
    ACPI: Added _OSI(Linux)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    TSC: PIT calibration confirmed by PMTIMER.
    TSC: using PIT calibration value
    Detected 697.409 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 514248k/524224k available (2151k kernel code, 9460k reserved, 844k data, 288k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    .init : 0xc03f3000 - 0xc043b000 ( 288 kB)
    .data : 0xc0319f76 - 0xc03ed360 ( 844 kB)
    .text : 0xc0100000 - 0xc0319f76 (2151 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay loop (skipped), value calculated using timer frequency.. 1395.93 BogoMIPS (lpj=2324696)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080609
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0e00)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (1395.93 BogoMIPS).
    net_namespace: 832 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
    PCI: Using configuration type 1 for base access
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: 0000:00:00.0 reg 10 32bit mmio: [f4000000, f7ffffff]
    PCI: 0000:00:02.0 reg 10 32bit mmio: [50000000, 50000fff]
    pci 0000:00:02.0: supports D1
    pci 0000:00:02.0: supports D2
    pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.0: PME# disabled
    PCI: 0000:00:02.1 reg 10 32bit mmio: [50100000, 50100fff]
    pci 0000:00:02.1: supports D1
    pci 0000:00:02.1: supports D2
    pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.1: PME# disabled
    PCI: 0000:00:03.0 reg 10 32bit mmio: [f0120000, f0120fff]
    PCI: 0000:00:03.0 reg 14 io port: [1800, 183f]
    PCI: 0000:00:03.0 reg 18 32bit mmio: [f0100000, f011ffff]
    PCI: 0000:00:03.0 reg 30 32bit mmio: [0, fffff]
    pci 0000:00:03.0: supports D1
    pci 0000:00:03.0: supports D2
    pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:03.0: PME# disabled
    PCI: 0000:00:03.1 reg 10 io port: [1840, 1847]
    PCI: 0000:00:03.1 reg 14 32bit mmio: [f0121000, f0121fff]
    pci 0000:00:03.1: supports D1
    pci 0000:00:03.1: supports D2
    pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:03.1: PME# disabled
    PCI: 0000:00:05.0 reg 10 32bit mmio: [f0122000, f0122fff]
    PCI: 0000:00:05.0 reg 14 32bit mmio: [f0000000, f00fffff]
    pci 0000:00:05.0: supports D1
    pci 0000:00:05.0: supports D2
    PCI: 0000:00:07.1 reg 20 io port: [1850, 185f]
    PCI: 0000:00:07.2 reg 20 io port: [1860, 187f]
    pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
    pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
    pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
    pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
    pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
    PCI: 0000:01:00.0 reg 10 32bit mmio: [f8000000, fbffffff]
    PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff]
    PCI: 0000:01:00.0 reg 18 32bit mmio: [f0200000, f0203fff]
    PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
    pci 0000:01:00.0: supports D1
    pci 0000:01:00.0: supports D2
    PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
    PCI: bridge 0000:00:01.0 32bit mmio: [f0200000, f02fffff]
    PCI: bridge 0000:00:01.0 32bit mmio pref: [f8000000, fbffffff]
    bus 00 -> node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
    ACPI: Power Resource [PSER] (off)
    ACPI: Power Resource [PSIO] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
    PCI: setting IRQ 9 as level-triggered
    pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
    pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    pci 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
    pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
    system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x103f has been reserved
    system 00:02: ioport range 0x1040-0x104f has been reserved
    system 00:02: ioport range 0xfe00-0xfe0f has been reserved
    system 00:09: ioport range 0x15e0-0x15ef has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x2000-0x2fff
    pci 0000:00:01.0: MEM window: 0xf0200000-0xf02fffff
    pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff
    pci 0000:00:02.0: CardBus bridge, secondary bus 0000:02
    pci 0000:00:02.0: IO window: 0x001400-0x0014ff
    pci 0000:00:02.0: IO window: 0x001c00-0x001cff
    pci 0000:00:02.0: PREFETCH window: 0x30000000-0x33ffffff
    pci 0000:00:02.0: MEM window: 0x34000000-0x37ffffff
    pci 0000:00:02.1: CardBus bridge, secondary bus 0000:06
    pci 0000:00:02.1: IO window: 0x003000-0x0030ff
    pci 0000:00:02.1: IO window: 0x003400-0x0034ff
    pci 0000:00:02.1: PREFETCH window: 0x38000000-0x3bffffff
    pci 0000:00:02.1: MEM window: 0x3c000000-0x3fffffff
    pci 0000:00:02.0: power state changed by ACPI to D0
    pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:00:02.1: power state changed by ACPI to D0
    pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    bus: 00 index 0 io port: [0, ffff]
    bus: 00 index 1 mmio: [0, ffffffff]
    bus: 01 index 0 io port: [2000, 2fff]
    bus: 01 index 1 mmio: [f0200000, f02fffff]
    bus: 01 index 2 mmio: [f8000000, fbffffff]
    bus: 01 index 3 mmio: [0, 0]
    bus: 02 index 0 io port: [1400, 14ff]
    bus: 02 index 1 io port: [1c00, 1cff]
    bus: 02 index 2 mmio: [30000000, 33ffffff]
    bus: 02 index 3 mmio: [34000000, 37ffffff]
    bus: 06 index 0 io port: [3000, 30ff]
    bus: 06 index 1 io port: [3400, 34ff]
    bus: 06 index 2 mmio: [38000000, 3bffffff]
    bus: 06 index 3 mmio: [3c000000, 3fffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 714k freed
    Simple Boot Flag at 0x35 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1006
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
    pci 0000:01:00.0: Boot video device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver4 ports, IRQ sharing disabled
    serial 00:0c: activated
    00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 288k freed
    Switched to high resolution mode on CPU 0
    input: AT Translated Set 2 keyboard as /class/input/input1
    ACPI: ACPI Dock Station Driver
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:07.1: version 2.12
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
    ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
    ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
    ata1.00: 195371568 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/33
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    Driver 'sr' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ReiserFS: sda2: found reiserfs format "3.6" with standard journal
    ReiserFS: sda2: using ordered data mode
    ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda2: checking transaction log (sda2)
    ReiserFS: sda2: Using r5 hash to sort names
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    Non-volatile memory driver v1.2
    thinkpad_acpi: ThinkPad ACPI Extras v0.21
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
    Registered led device: tpacpi::thinklight
    thinkpad_acpi: another device driver is already handling bay events
    thinkpad_acpi: disabling subdriver bay
    Registered led device: tpacpi::power
    Registered led device: tpacpi:orange:batt
    Registered led device: tpacpi:green:batt
    Registered led device: tpacpi::dock_active
    Registered led device: tpacpi::bay_active
    Registered led device: tpacpi::dock_batt
    Registered led device: tpacpi::unknown_led
    Registered led device: tpacpi::standby
    input: ThinkPad Extra Buttons as /class/input/input2
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    e100 0000:00:03.0: PME# disabled
    e100: eth0: e100_probe: addr 0xf0120000, irq 11, MAC addr 00:03:47:0f:de:3d
    eepro100.c:v1.09j-t 9/29/99 Donald Becker
    eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
    Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1864kHz
    Linux agpgart interface v0.103
    agpgart-intel 0000:00:00.0: Intel 440BX Chipset
    agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
    [drm] Initialized drm 1.1.0 20060810
    pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    [drm] Initialized r128 2.5.0 20030725 on minor 0
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    fuse init (API version 7.9)
    Marking TSC unstable due to cpufreq changes
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input5
    ACPI: Sleep Button (CM) [SLPB]
    Clocksource tsc unstable (delta = 142862504 ns)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI0007:00: registered as cooling_device0
    ACPI: Processor [CPU] (supports 8 throttling states)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (34 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
    spurious 8259A interrupt: IRQ7.
    Yenta: ISA IRQ mask 0x00b8, PCI irq 9
    Socket status: 30000020
    Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x00b8, PCI irq 9
    Socket status: 30000006
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pccard: CardBus card inserted into slot 0
    PCI: 0000:02:00.0 reg 10 32bit mmio: [0, ffff]
    ath_pci 0000:02:00.0: enabling device (0000 -> 0002)
    ath_pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    input: PC Speaker as /class/input/input6
    USB Universal Host Controller Interface driver v3.0
    uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:07.2: UHCI Host Controller
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:07.2: irq 10, io base 0x00001860
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
    piix4_smbus: probe of 0000:00:07.3 failed with error -1
    Error: Driver 'pcspkr' is already registered, aborting...
    usb 1-1: new low speed USB device using uhci_hcd and address 2
    input: Video Bus as /class/input/input7
    usb 1-1: configuration #1 chosen from 1 choice
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /class/input/input8
    NET: Registered protocol family 23
    parport_pc 00:0d: activated
    parport_pc 00:0d: reported by Plug and Play ACPI
    parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
    nsc-ircc 00:0e: activated
    nsc-ircc, chip->init
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    IrDA: Registered device irda0
    nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
    PPP generic driver version 2.4.2
    MadWifi: ath_attach: Switching rfkill capability off.
    wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
    lp0: using parport0 (interrupt-driven).
    ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=9
    ppdev: user-space parallel port driver
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    usbcore: registered new interface driver hiddev
    input: Logitech Logitech USB Optical Mouse as /class/input/input9
    input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    JFS: nTxBlock = 4026, nTxLock = 32211
    Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
    warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    conservative governor failed, too long transition latency of HW, fallback to performance governor
    thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
    The strangest thing has also happened recently. The laptop refuses to use its own display when starting up in the dock unless an external monitor is plugged in. If a CRT is plugged in, the docked laptop starts up and shows the splash screen on its LCD. If no CRT is plugged in, turning on the docked laptop results in a blank screen. This might have happened because I fiddled with the BIOS which would make alot of sense but resetting the BIOS to default configuration hasn't fixed the problem. I also could have broken a pin but the last thing I remember doing before this happened is running cat /sys/module/snd_ac97_codec/parameters/power_save. It's one of those untouchable virtual files that causes a kernel oops when I try to read it sometimes. I have no idea how this would break the dock but it doesn't matter. Even if using the dock requires some external monitor jazz, I still want the card to be detected and it isn't.
    Sorry to bombard you with obscure information but I don't know where else to turn. I've asked on the thinkpad mailing list and IRC channel to no response and I've seen one other "knowledgeable person" mention these errors on the LKML. I will subscribe to that and ask him too. I'm just very surprised... this gave me the impression that what I wanted to do would work trivially and automatically on Linux and now I'm finding that it's broken for me and possibly every other Linux user. I will seek out thinkpad users from around here with all types of models and distros and see if they have any luck. So far Arch, Arch install CD and an ancient Ubuntu install CD don't work here. If anyone has this and can test it or can decipher some ideas from the posted output (new kernel parameters, new kernel config flags, new udev rules, new modules?) I'd really appreciate it.

Maybe you are looking for

  • Columns from table FLASHBACK_TRANSACTION_QUERY

    Hi, have any problem with columns START_TIMESTAMP and COMMIT_TIMESTAMP from table FLASHBACK_TRANSACTION_QUERY ? It's declarated in type DATE. This is correct ? Message was edited by: anderson.rf Message was edited by: anderson.rf

  • Problem While Upgrading from ECC 5.0 to ECC 6.0

    Hi Experts, I am doing project on upgrading. there is one program in ECC 5.0, and it is working fine in ECC 5.0 But while upgrading to ECC 6.0 it is giving syntax error. below I am sending the code. BEGIN OF lty_s_ekab_key,                           

  • After reloading fonts do not appear in Character tab

    I had to reload after getting new hard drive and cannot get fonts to show up in Type/character. They do show up under the Type dropdown but not under window/type/character. I have deleted preferences and .lst files. I have deleted windows/system32/fo

  • Ethernet not able pass traffic after Mountain Lion upgrade.

    I used the ethernet on my display to download Mountain Lion. Ran the install, rebooted, now nothing. Wifi works fine from my connected MBP15. The display adapter shows connected, but doesn't get a DHCP IP. If I set one manually, it doesn't pass traff

  • WinProducer2 start error, won't run with nVidia Capture drivers

    I'm not having a good experience with the bundled WinProducer2 that came with my MX440VT8x-128. If I have either of the versions of the nVidia capture-drivers that came on the card's CD (that's v. 1.16 or 1.18)  installed, or the 1.22 version from nV