Do Adobe Palettepanel and Adobe Air work together?

Hallo!
when I am working with Flex and the Adobe Flash Player everything is fine. I even can use the Adobe Paltettepanel to integrate my Flex applications in Adobe Indesign.
But when I want to use the Palletepanel in an Adobe AIR application nothing works.
My question:
Do Adobe Palettepanel and Air work together?
Thanks,
Alois Blaimer

I'll say for the moment no it doesn't, it has been requested and 
probably in the future it'll work with AIR.
Sincerely,
Michael
El 11/05/2009, a las 2:05, alois2805 <[email protected]> escribió:
>
Hallo!
>
when I am working with Flex and the Adobe Flash Player everything is 
fine. I even can use the Adobe Paltettepanel to integrate my Flex 
applications in Adobe Indesign.
>
But when I want to use the Palletepanel in an Adobe AIR application 
nothing works.
>
My question:
Do Adobe Palettepanel and Air work together?
>
Thanks,
Alois Blaimer
>

Similar Messages

  • Do Palettepanel and Adobe Air work together?

    Hallo!
    when I am working with Flex and the Adobe Flash Player everything is fine. I even can use the Adobe Paltettepanel to integrate my Flex applications in Adobe Indesign.
    But when I want to use the Palletepanel in an Adobe AIR application nothing works.
    My question:
    Do Adobe Palettepanel and Air work together?
    Thanks,
    Alois Blaimer

    Hi Alois,
    If I'm not mistaking than Patch Panel was designed for the Flex developers and I don't think it has support for AIR.
    With best regards,
    Barna Biro

  • Confused about how Adobe Reader& Adobe acrobat work together?

    I have had Adobe Reader for some time--used to have Acrobat too, but when it became outdated-- a "pc-"fixer -upper" convinced me I needed Adobe Flash Player installed. This did nothing for me. I have an older computer--do not watch movies or even many DVD's or videos on my computer and don't download songs either. I would like to understand how all these Adobe products work together and what they can do for me. I do use and read and print PDF files from various organizations and would like to be able to combine  or merge these if it will take up less space. I am not very computer literate so I need some help. Thanks for any suggestions from readers & probably I need to watch the instructional aids.

    Adobe Reader is purely a PDF viewer, with the ability to fill forms or add comments.
    Adobe Acrobat can create, edit, merge PDF files.  Of course it can also be used to only view PDF files.
    Older versions of Acrobat (9 and earlier) did not work well together with Adobe Reader; Acrobat X and XI work perfectly well with Reader X and XI.
    Regarding your idea "to combine  or merge these if it will take up less space"; I don't think doing this will result in less space usage.

  • Facetime between iPad2 and MacBook Air worked fine here in the USA.  The iPad2 is now in Rome, Italy and we can't connect internationally.  We both can hear the caller ringing in, but after accepting the call we cannot connect.  No voice, no video.

    Facetime between iPad2 and MacBook Air worked fine here in the USA.  The iPad2 is now in Rome, Italy and we can't connect internationally.  We both can hear the caller ringing in and can see who is trying to call, but after accepting the call we cannot connect.  No voice, no video. iPad is successfully sending and receiving eMails, but no Factime connection   What's up?

    I am curious if possibly the hotel has some sort of VOIP block on.  Have you tried Skype?  Did you talk to the hotel staff?  My husband is traveling to Milan in a couple of days and I wonder if he will run into the same issue.  He has had no problems from Istanbul but he is staying in a corporate apartment there.  If you find an answer please post back.  Thanks

  • Trying to make sense on how and if RBAC and MOAC could work together

    Hi All,
    We upgraded from 11.5.9 to R12.1.1 in Nov-2009.
    Since the time we have upgraded to R12, we are trying to make sense as to how and if RBAC and MOAC could work together.
    The use case is as below:
    *11i Days*
    US Accountant - accesses ‘AR superuser US’
    Canada Accountant - accesses ‘AR superuser Canada’
    France Accountant - accesses ‘AR superuser France’
    Spain Accountant - accesses ‘AR superuser Spain’
    North America Financial controller - Switches between 'AR superuser US' and 'AR superuser Canada'
    European Financial controller - Switches between 'AR superuser France' and 'AR superuser Spain'
    CFO - Switches amongst 'AR superuser US','AR superuser Canada', 'AR superuser France' and 'AR superuser Spain'
    Now in R12- (Wow there is MOAC!)
    US Accountant - accesses ‘AR superuser US’
    Canada Accountant - accesses ‘AR superuser Canada’
    France Accountant - accesses ‘AR superuser France’
    Spain Accountant - accesses ‘AR superuser Spain’
    North America Financial controller - accesses 'AR superuser North America'
    European Financial controller - accesses 'AR superuser Europe'
    CFO - accesses 'AR superuser Global'
    With R12 now there are 3 additional responsibilities.
    We have (like most of the other EBS customers) custom responsibilities and so there is maintenance.
    More the responsibilities more the maintenance...More the SOD issues.
    To prevent creating new responsibilities, we could use the ‘MO: Security Profile’ at the user level BUT that would mean that now these users would have access to multiple OUs for all the responsibilities...that is not good.
    What-If: There is only 1 responsibility 'AR SuperUser' and somehow using RBAC, roles are created and assigned to users so that they only have access to specific OUs.
    Apparently, MOAC works based on MO:Security Profile that is something that RBAC cannot control.
    Am I missing something...RBAC seems to be no good?
    In PROD(R12.1.1)- We are expecting that we would end up creating 100+ new responsibilities since we have many shared services users and they all want to benefit from MOAC...Appreciate, if you could please help us understand how we can prevent these 100+ new responsibilities from getting created?
    Thanks
    Rahul Gupta

    Hi Rahul,
    your question is quite interesting. I did a lot in the area of RBAC to understand the background.
    RBAC mainly allows you to
    - group responsibilities
    - build hierarchies
    - manage low level data access (via VPD)
    - Grant permissions (new with R12)
    Unfortunately you can't control profile options via RBAC. Therefore, the MO:Sec Profile has to stay on responsibility level. I was playing with the alternative to put this profile option on user level, but also in this case the number of maintenance steps will stay the same.
    I would like to share a document with you, what's your email (or search my name in linkedin)?
    kr
    Volker Eckardt

  • My colleague and I are working together (from separate MacBooks) to create an iBook for our students. We plan to work on sections separately and combine later. Must we use the SAME template to do so?

    My colleague and I are working together (from separate MacBooks) to create an iBook for our students. We plan to work on sections separately and combine later. Must we use the SAME template to do so?

    I'm not sure iBA reacts well to this type of editing, not to mention the cumbersome nature of trying to bring everything together in general.
    I'd suggest a workflow where one book is handed off, instead. That, or, let the individuals involved create their basic content in Pages, then when ready, use iBA's Insert Pages Chapters menu to string them together. Best to work in a linear fashion and avoid adding/removing/adding/moving portions, etc.
    If you must have separate authors, be sure to use the identical template and have them all properly trained up before going forward - trying this as a learning experience may result in an off-putting experience otherwise , with more time spent on chasing knots than on expressing writing skills, etc.

  • Can I make my iMAC and MAC book work together?

    I've done the set up to join other networks.....trying to get my desktop and laptop to work together.
    Is it even possible for them to keep updated info regardless of which one I enter it on?
    If so, please tell me how.
    Thank you
    Diane

    There are various programs like Dropbox that can help you sync two computers over the network, but I still find them kind of a hassle to set up and maintain.
    I simply make my laptop the primary storage, and I turn on File Sharing on my laptop. Then on my desktop I just log into my laptop and open files directly over the network. On my desktop I have aliases to my laptop folders so I can get into them in a couple clicks.

  • How well does Adobe Air work with the MacBook Pro?

    If I install a program that uses Adobe Air will it affect my MacBook Pro?

    I have several other Macromedia applications - but not Air. But if the other applications are an indication, boot is going to be slow (around a minute); Air's dependence on Flash will guarantee relatively slow performance. As you know, most other applications boot in seconds.
    Your best solution would be to download the free part of the programs to determine if you find the performance acceptable.

  • CS6. Need to have time remapping and warp stabilizer work together.

    This should be obvious for most people. These two effects must be made to work together.
    If you're shooting with a glider you're usually moving very carefully (read: slower than normal) so the footage in post would need to be sped up plus stabilized a bit.
    Currently warp stabilizer and time remapping cannot be applied at the same time. But I *need* it to be applied at the same time. I need a workaround.
    Should I:
    1. shorten the clips, export them, re-import them into the project, and then apply stabilizer?
    2. apply the stabilizer, export them, re-import them into the project, and then shorten them?
    How do I export individual clips as just seperate clips while Premiere? Do I have to drag them into an empty timeline one by one, apply the stabilizer/remapping, and export, remove the clip, put in the second clip, etc all one by one?
    I've used Mercalli in the past and I time remap the footage and then apply Mercalli to the accelerated clip. Mercalli doesn't mind a bit.

    ComputerNovice25 wrote:
    Adobe might have written the code in a way that doesn't include the ability to deal with that extra variable. I'm assuming that when it's nested it then makes the timeline it's in just read it as a normal clip again instead of a clip with a non-supported variable included.
    Although I'm totally just guessing, but if what I'm saying is correct it would mean a fix wouldn't be very much work at all. Which means in the future they could simply provide a quick and easy patch to fix this. I'd highly suggest to make a feature request.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    Does Adobe read these feature requests? I often have a hard time justifying spending time to type out something when I feel like it's just being thrown into a black hole. I'm sure the team gets thousands of feature requests. It's like the lottery. Statistically you will never win. Sure, you'll never win if you don't play, but it's still a waste of time to play. I know, I'm pessimistic. Just don't have much faith in conglomerates - although Lightroom 3 is by far the most perfect program I have ever used and I would kiss the LR3 team if I could.
    With Lightroom, Photoshop is hardly needed anymore unless absolutely necessary or for truly intensive chop-like edits. Premiere DESPERATELY needs a Lightroom equivalent.
    I have half a mind to guess (nicely) that you video guys have absolutely no idea what you're missing out on, workflow-wise. It's life-changing. Literally.
    I'm doing a video right now and I can't stop thinking about how if I had a Lightroom workflow, this video consisting of 40 clips, 40 titles, 40 transitions, audio tracks could be on the way to final export in 5 minutes. 5 MINUTES. And be 100% as good as if I had to spend an hour doing this in traditional Premiere.

  • Edege animate: Parallax and Spotlight = Not working together?...

    Hi all,
    This is my first post, and sorry for my English :))
    I am learning, and have a small composition on Edge Animate CC 2014 on Scrolling Parallax, which works very well, and now I want to add a spotlight... but do not working together.
    My code is:
    Stage: 1920 x 2000
    Autoplay: No
    -- creationComplete: (nothing)
    -- compositionReady:
    EC.Parallax.setup(sym);
    On scene:
    A Text (is for launch the spotlight with the click function):
    Action for "Text":
    -- click
    // Open image in spotlight overlay
    // Set up configuration
    var config = {
    width: "1024",
    height: "768",
    type: "image",
    source: "images/dog.jpg"
    EC.Spotlight.open( config );
    My problem is that the parallax works great, but when I make a click on the button that showing the spotlight... this is not released, and "dog.jpg" picture it is show on the bottom of the page (without spotlight).
    What am I doing wrong?
    Note: I charge via url the "All in One" of EdgeCommons CDN : http://cdn.edgecommons.org/an/1.1.2/js/min/EdgeCommons.js
    Many thanks!

    Ok. I've solved. I needed to load some things:
    EC.Parallax.setup (sym);
    The full code (that works for me) is:
    -- compositionReady:
    EC.Parallax.setup(sym);
    // Load Edge Commons
    yepnope({
    load: [
    "http://cdn.edgecommons.org/an/1.1.0/js/min/EdgeCommons.js",
    // Load style sheet for the overlay
    "http://cdn.edgecommons.org/an/1.1.0/css/style.css"
    -- click
    // Open image in spotlight overlay
    // Set up configuration
    var config = {
    width: "1024",
    height: "768",
    type: "image",
    source: "images/dog.jpg"
    EC.Spotlight.open( config );
    I hope to serve others.
    Regards

  • Can Forms 6i and Personal Oracle8i work together?

    Hi,
    I am going to download
    1. Oracle Forms Developer/Server Release 6i for Windows NT
    2. Oracle8i Personal Edition on NT
    Before download them, I want to know if they can work together. I want to learn Oracle database and developer 2000. If you have a better idea, please let me know.
    Thanks in advance.
    Sue

    Sue,
    If you're going to download them from the net, then good luck - I never managed to do it. I now have CD's for all the Oracle products and have Personal Oracle 8i and Forms 6i on my NT pc. It all works fine. You won't have any problems (as long as you get the software on CD's). For the username/password, just use scott/tiger to start off with.
    Harry
    null

  • Internal Mic and Bluetooth not working together at the same time

    Okay.. so I've been noticing this happen alot lately. Whenever I have my usb wacom tablet plugged in (which is almost always), there would be no internal mic input and bluetooth would become "not unavailable". Also, even when I try an external mic, there was no input. Could this be a coincidence or some related usb-bluetooth problem? Could it be my audio input or tablet driver problem?
    I've used my mic to skype before I had installed the tablet. Also before I used garage band to record my sister's guitar with an external mic, there was no problem at all, and of course I didn't have my tablet plugged in at the time. Recorded a whole hours worth of music, and didn't have any problems.
    Today.. I checked to see if my internal mic was working before I launched skype, and it was working perfectly, and I also noticed my bluetooth was available (didn't test it though). Then I went on skype talked to friend for about 20min, and suddenly the audio stop working. I had my tablet plugged in from earlier today. I restarted my macbook (with no tablet plugged in) and still mic input isn't working. I tried and external mic, but still nothing. I tried uninstalling skype, still nothing.
    This is not the first time this happened, I noticed it would somehow fix itself after a few days every time, and mic and bluetooth would start working again out of nowhere. Which makes it even more weird.
    Need help pleaseee!
    PS. I tried getting someone to fix it before(a few months ago- I don't really use my mic or bluetooth much), but when I brought it in and started up my mac, at that time it was working again. But now it isn't working =(

    UPDATE: I just noticed my bluetooth was no longer "unavailable", so I quickly went into system preferences, and noticed that my internal mic input had some input! Very weak though, only 1-2 bars. So what does this mean?

  • Wireless and cable network working together

    How do I set up an apple network to allow wireless and ethernet to work simultaneously for different purposes. At our current location we have internet access through a wireless hub but are networking all computers through ethernet. I need to seperate the data stream to allow internet and email to see the Wireless network and have the data link go through the ethernet. Does anyone know the method to follow to get this to work??
    regards
    Damian Morris

    Why are you wanting the two networks to be isolated?
    But like Like Linc said,
    Put the priority of the adapters accordingly
    System Preferences > Network > (gear symbol next to the '-' sign) Set Service Order
    Wifi
    Ethernet

  • [SOLVED] Can't get ccache and colorgcc to work together

    Hi all,
    Has anyone figured out how to get ccache and colorgcc to work at the same time?  I can only get one or the other, but not both.
    If I put them both in the path, with colorgcc first, then "g++" invokes colorgcc, which then calls /usr/bin/g++, skipping ccache.
    If I put ccache first in the path instead, then running "g++" invokes ccache, which then calls /usr/bin/g++, skipping colorgcc for some reason.
    Putting colorgcc back to first in the path, then editing /etc/colorgcc/colorgccrc means I can set the compiler paths to point to ccache.  However then running "g++" invokes colorgcc, which calls ccache, but then ccache seems to call colorgcc again, which calls ccache, which calls colorgcc, etc, etc.
    Perhaps I'm missing something, but I can't see how you tell ccache where the compiler binaries are located, as this seems to be the problem - ccache autodetects them, and always seems to pick the ones I don't want!
    Any suggestions?
    Last edited by Malvineous (2011-05-03 01:29:48)

    Ha, ok, as usual as soon as I post in a forum I stumble across the answer.  Turns out there's a CCACHE_PATH environment variable you can use to tell ccache where to look for the real compilers.  It doesn't seem to work setting this to point to colorgcc, but putting only colorgcc in the path, editing /etc/colorgcc/colorgcc to point to ccache, then setting CCACHE_PATH=/usr/bin seems to do the trick...
    But if there's a better way please let me know!

  • Std ESS and Custom Workset work together

    Hi,
    At a time, can i have Std ESS and Custom Workset for ESS work?
    The navigation is not happening properly. When i click on a service in the custom workset, it navigates to Std. I can modify the pcd of each page and make this work fine, it's affecting the std,why?
    I am making changes in Change Entries and not in Add Entries for the Page resource
    but is this the right procedure?
    To my userid i have the custom as well as the std role assigned.
    Have hidden services from SPRO.
    My purpose is to check the Std ESS and Custom ESS simultaneously.
    Am i following the right procedure?
    Please help.
    Regards,
    Remi

    My purpose is to check the Std ESS and Custom ESS simultaneously?
    First of all why you need two set of roles, If you are using your own role then have  a single
    custom role assigned to the user, why have multiple as it is being redundant,
    Its better to have clear roles defined and assigned!

Maybe you are looking for