Do any versions of FF support the use of Lenovo's ThinkVantage Password Manager s/w and fingerprint scanner?

Lenovo Edge 15" laptop running Windows 7 (64 bit) and using Thinkvantage Password Manager Ver 3.20.0330 and TouchStrip Fingerprint Sensor (UPEK).
The password manager is to set to restrict logins to websites to fingerprint but when logging into websites I am not given the option to use the fingerprint reader -(the login info stored in the P/W manager is entered and login takes place). I have seen elsewhere that FF 3.6 has problems supporting this combination and wonder if any earlier versions of FF would be suitable or if FF 4 is likely to support it.
Any help would be appreciated

Kent1968
I would recommend, if you have it set, to go to a restore point before you uninstalled the password manager version that did not give you a problem and not use the new version until this bug is resolved.
If the fingerprint light is not showing up, then it is probably not limited to you and I hope Lenovo checks it out.
Too bad the newer version seems to load slowly - I will check it out as well.
jEdgar

Similar Messages

I have a password manager built into my fingerprint scanner. It worked on the older version of Firefox but it will not on this new version. It will not recognize log in pages and will not load information.

With the old version, all I had to do was go to the log in page to any of my email accounts or membership sites and scan my finger. It would fill in the fields and open my account. I like this new version of Firefox, but if I am not able to use that password manager then I will have to install the older version.

A 2008 black MacBook can run OS X Lion (OS X 10.7). However, if you want to use that Mac for apps that do not work with the new MacBook, I recommend you to leave it with Mac OS X 10.6.8, because OS X Lion removes compatibility with PowerPC apps.
Do not worry about the battery of the new MacBook Pro. You can replace it yourself or take it to an Apple Store or reseller, and the cost is similar. However, it's important to take the Mac to an Apple Store or reseller if your Mac's battery fails while the Mac is in warranty, because you will get the battery replaced for free.

Using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

Any version od IDSync supports user deletion from AD to DS

Hi,
I would like to know that any version of IDSync supports deletion of users in AD to be synced with DS 5.2. We use Version - 1 2004Q3
Build - 2004.259.1055 with Win2k3 AD. if it is there how to go about implementing it in a production environment.
shaji

hi,
i don't know if this is the recommended way but we have a cron job running
where we check for deleted AD acounts:
<IDSYNC_INSTALL_PATH>/idsync resync -D cn=<LDAP_MANAGER> -w <LDAP_MANAGER_PW> -h <LDAP_SERVER_HOST> -p <LDAP_PORT> -q <IDSYNC_CONF_PW> -s <ROOT_SUFIX> -x -o Windows -i ALL_USERS
hope it helps

JSF seems not to support the use of the back buttons and html frames.

I�m having the following problem. I have a JSP which contains a button that register a listener. Here is part of the code:
<h:command_hyperlink label="<%=engineBean.getId()%>" commandName="<%=engineBean.getId()%>">
<f:action_listener type="helloDuke.CommandAction"/>
</h:command_hyperlink>
This action listener only forwards the request to other simple JSP.
The problem appears in the following situation:
1 � I click in the button that generates the event that will be processed by helloDuke.CommnadAction listener.
2 � It forward to a second JSP page.
3 � This second page is rendered to the user properly.
4 � The user clicks in the browser�s back button to return to previous page.
Then if is the user clicks in first page button, the CommandAction listener was removed. You must click again in the button to forward to the correct page.
The same happened if you are using html frames. If you have a frame with 2 pages and both pages register action listeners.
The last loaded page cleans the actions listener of the other.
Does anybody have any solution?.
It seems JSF doesn�t support the use of frames and I think that in some situation the frames are the solution to several problems.
Any help will be really appreciated.

Using the saveStateInClient=true produces a faulty output when using the command_button and an action_listener. The page that is rendered is totally useless: the button won't work, and due to the faulty rendering there's an output like: >com.sun.faces.saveStateMarker
So, why is it, that pressing the button (not using the saveStateInClient option) will only work the second time, same thing pressing the backbutton. Pressing the reload button will toggle between two pages - the one before the session id is assigned and the one that it's supposed to show.
Any guess will be greatly appreciated !!!!

Remote host supports the use of SSL ciphers that offer weak encryption

Dear All,
Our Internal security audit suggests to avoid the use of Week SSL ciphers for our SAP PI 7.0 servers.
We have followed the SAP note 510007 - Setting up SSL on Web Application Server ABAP
as mentioned in the point 6 we have added below parameter in the instance profile of application server and restarted our server but still the issue is not resoved.
ssl/ciphersuites=MEDIUM:HIGH:EXPORT:!LOW:!eNULL
Clients are accessing our PI server through SAP Web dispatcher.
Kindly suggest the action to be taken to resolve the issue.
Please find the below comment from Audit.
The remote host supports the use of SSL ciphers that offer weak encryption.
Note: This is considerably easier to exploit if the attacker is on the same physical network
Regards,
Lalitha.

Hi Jim,
The remote host is the PI(7.0) server.
PI server profile
FN_JSTART = jcontrol$(FT_EXE)
ssl/ciphersuites = HIGH:MEDIUM:!mMD5
jstartup/recorder = java -classpath ../j2ee/cluster/bootstrap/launcher.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/
cluster/bootstrap -node %nodeID% %startTime% -bz $(DIR_GLOBAL) âexitcode %exitcode%
login/accept_sso2_ticket = 1
SAPSYSTEMNAME = APQ
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = $(DIR_INSTANCE)/exe
jstartup/trimming_properties = off
jstartup/protocol = on
jstartup/vm/home = /opt/IBMJava2-amd64-142
jstartup/max_caches = 500
jstartup/release = 700
jstartup/instance_properties = $(jstartup/j2ee_properties):$(jstartup/sdm_properties)
j2ee/dbdriver = /oracle/client/10x_64/instantclient/ojdbc14.jar
PHYS_MEMSIZE = 512
exe/saposcol = $(DIR_CT_RUN)/saposcol
rdisp/wp_no_dia = 10
rdisp/wp_no_btc = 3
exe/icmbnd = $(DIR_CT_RUN)/icmbnd
rdisp/j2ee_start_control = 1
rdisp/j2ee_start = 1
rdisp/j2ee_libpath = $(DIR_EXECUTABLE)
exe/j2ee = $(DIR_EXECUTABLE)/jcontrol$(FT_EXE)
rdisp/j2ee_timeout = 1800
rdisp/frfc_fallback = on
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00
icm/server_port_0 = PROT=HTTP,PORT=80$$
# SAP Messaging Service parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
rdisp/wp_no_enq = 1
rdisp/wp_no_vb = 1
rdisp/wp_no_vb2 = 1
rdisp/wp_no_spo = 1
# Jcontrol: Migrated Profile Parameter
#      create at Wed Mar 25 20:20:02 2009
j2ee/instance_id = ID0079698
Web dispatcher profile
SAPSYSTEMNAME = WD0
SAPSYSTEM = 00
INSTANCE_NAME = W00
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = $(DIR_CT_RUN)
wdisp/shm_attach_mode = 6
# Accesssability of Message Server
#rdisp/mshost = asapq00.b.com
#ms/http_port = 8100
#ms/https_port = 8101
wdisp/system_0 = MSHOST=asapq00.b.com, MSPORT=8100, SID=APQ
# Configuration for medium scenario
icm/max_conn               = 16350
icm/max_sockets            = 32768
wdisp/HTTPS/max_pooled_con = 16350
icm/req_queue_len          = 8000
icm/min_threads            = 100
icm/max_threads            = 500
mpi/total_size_MB          = 700
mpi/buffer_size            = 32768
mpi/max_pipes              = 21000
wdisp/HTTP/max_pooled_con = 8192
wdisp/HTTPS/max_pooled_con = 8192
# SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTP,PORT=80,EXTBIND=1
icm/server_port_1 = PROT=ROUTER,PORT=443,EXTBIND=1
#icm/host_name_full= asapq00.b.com
icm/host_name_full= qtyh2h.k.co.in
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=./admin,AUTHFILE=/sapmnt/WD0/global/security/data/icmauth.txt
ssl/ssl_lib=/usr/sap/WD0/W00/sec/libsapcrypto.so
wdisp/HTTPS/dest_logon_group = PUBLIC
wdisp/HTTPS/max_client_ip_entries = 100000
wdisp/HTTPS/sticky_mask = 255.255.255.0
#Additional Parameters
wdisp/add_client_protocol_header = true
wdisp/auto_refresh = 120
wdisp/max_servers = 100
wdisp/handle_webdisp_ap_header = 1
#Registering SAP Web Dispatcher in the SLD
#wdisp/system_0 = HOST=asapq00.b.com, PORT=8100, SID=APQ, NR=00
#Parameter to avoid week SSL ciphers
ssl/ciphersuites=HIGH:MEDIUM:!mMD5
Regards,
Lalitha

Does the iphone support the use of a wildcard certificate?

Does the iphone support the use of a wildcard certificate?
Our exchange infrastructure utilises a wildcard (*.companyname certificate) from Godaddy.
- Connects fine and authenticates
- Can manually sync and pull emails
- Can Send and Delete emails
However server is not establishing the activesync connection and ping so mail can be pushed to the device.
My guess is its a problem with the wildcard certificate that is used, WM5.0 devices didnt work with it, does anyone one know if the iPhone supports this?
- I can get to OWA fine which uses the same wildcard cert.
- WM6.0 devices push mail fine.
Thanks.

kfc01,
The iPhone Deployment Guide (linked from http://www.apple.com/support/iphone/enterprise) says it does for VPN.
Hope this helps,
Nathan C.

Does Firefox OS support the use of VPN's?

Simple question, does Firefox OS support the use of VPN's? If not is it a feature that will be added? And if so, when?

Thank you for your interest and for purchasing a device! The bug reported has went through some employees. I'm sure that we'll get something done shortly.

I want to know if Lightroom 5 (version 5.7) supports the conversion of raw files from the Fuji X-T1 micro 4/3 camera system???

I am considering purchasing the Fuji X-T1 Micro 4/3 camera.
However before I do I need to know if Lightroom 5 version 5.7 supports the conversion of raw files from this camera!!!????
Can anyone please let me know if Lightroom does convert raw files from the Fuji X-T1 please???
Many thanks,
Connie

Dear Adobe Support Staff!
Many thanks for getting back to me re Lightroom and the Fuji X-T1.
I am now wondering if Lightroom supports the Olympus OMD-E-M1 raw files??? Will Lightroom 5.7 convert raw files from this micro 4/3 camera??
This is the one I'm now intending to buy.
Many thanks for getting back to me!!!
Cheers
Sent from my iPhone

I have a mac powerbook g4 power pc processor, OS 10.5.8. what is the most current version of firefox i can use? i currently have 2.0.0.9 and am unable to auto or manual update

i have a mac powerbook g4 power pc processor, OS 10.5.8. what is the most current version of firefox i can use? i currently have 2.0.0.9 and am unable to auto or manual update edit

It was in the release notes for version 4 IIRC

I was told of an application that will allow the use of a second screen to view my data and files, but I forgot its name. I'd like to make the connection because my LCD is broken.

I was told of an application that will allow the use of a second screen to view my data and files, but I forgot its name. I'd like to make the connection because my LCD is broken.

You don't need an application, just plug a compaitble monitor into the display port of your MacBook Pro, set the screen up in System Preferences>Displays

Often for no apparent reason the computer crashes and nobody available to any command (keyboard or mouse), the images disappear. I am forced to shut down and restart the computer.

often for no apparent reason the computer crashes and nobody available to any command (keyboard or mouse), the images disappear. I am forced to shut down and restart the computer.

open console in Applications>Utilities, check the system log for the date/time of the last problem for clues.

Thinkvantage Password Manager - Which Browsers supported?

I am currently using an Edge 15" running Windows 7 (64 bit) and Firefox 3.6.12. I have Thinkvantage Password Manager (3.20.0330.00) installed together with a fingerprint reader.
The password Manager is not opening when I log into web sites to capture the login info because Firefox has disabled the add in associated with it due to compatibility problems.
Can anyone suggest a browser that does work properly with the password manager?. If possible I would like to avoid IE and stick with an earlier version of FF - do any of the earlier versions work?
What's been your experience?
Regards
Markaza

Hello guys,
Here is a patch for Firefox 3.6 : http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-75278
Works well for me.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Does ThinkVantage Password Manager work with Firefox 3.6. Earlier versions it would not work.

Last time I installed Firefox it would not load Lenovo ThinkVantage Password Manager as a plug in. Since then I have not used Firefox. I would like to again try Firefox but thought I would ask the question first. Can I use ThinkVantage Password Manager with Firefox 3.6?

Lenovo have released a patch that will make the ThinkVantage Password Manager work with Firefox 3.6 and higher. You can download it from:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-75278
I've just installed it and it works perfectly now.

Does RMI support the use of UDP?

Hi, I'm writing a publication and I need a verifiable resource (i.e. a web document written by the people at Sun) that indicates definitively whether RMI is capable of supporting UDP.
I've been searching the forums and came across some dissonant information concerning this. Here are the posts:
1.
RMI is built on top of Java's object and class facilities, its objects serialization protocol and its TCP/IP networking support, so its not possible to run it ontop of UDP.
2.
RMI use standard ISO TransfertControlProtocol network layer.TCP is aproximatly the 4th layer and IP the 3.
3.
RMI can also use UDP (same layer than TCP)
The last one disagrees with the previous two.
Thanks for any references anyone can provide,
Tim

just to correct myself. I had a short break and rewinded some years back to remember that NFS uses UDP (in fact sun RPC was developed to support NFS) and that sun RPC allowed both UDP and TCP. sorry about that:)
Meanwhile, I found out that Berkeley implemented their own version of RMI , one aspect of which is "UDP-RMI".
check it out at
http://now.cs.berkeley.edu/Millennium/groups/GRP_SIMS/annual.html
If you check SUN's RMI implementation code however you may confirm that they don't support UDP.
Nuno

Do any versions of FF support the use of Lenovo's ThinkVantage Password Manager s/w and fingerprint scanner?

Similar Messages

Maybe you are looking for