Do arch developers plan to adopt SystemD

As in subject. Do you? It seems for me systemd is compatible with Arch Way. SystemD is based on simple idea wich solves complicated problems.

falconindy wrote:Interesting idea. This has never been discussed before.
I'm not sure if you're joking or not:
http://mailman.archlinux.org/pipermail/ … 17929.html (this one is about Upstart)
http://mailman.archlinux.org/pipermail/ … 17971.html
or maybe you meant "discussed on the forums":
https://bbs.archlinux.org/viewtopic.php?id=96316
Last edited by karol (2011-05-15 21:37:31)

Similar Messages

  • Maintaining stability within Arch/Backup Planning

    Hello Forum,
    I've been using Arch for around 5 months or so. I truly do love this operating system, and the amount of control it offers and to be fair, in the short time I've been using it, I've only had pain with one update, and it was still a relatively minor fix.
    My issue is that I have recently assembled a new computer, and I'm debating on what to run as its primary OS. On this system I plan on having a couple of virtualized servers, which I will need to have regular access too, my worry is that Arch may have some major bug in the future after an update, and I will not be able to utilize these servers.
    I have tried going back to a more stable yet extensible OS, fedora for example (Primarily because I will be administrating Redhat boxes in my next job) but I am now completely dissatisfied with an overly bloated and opaque operating system, that would require hours of streamlining to get it down to a level that feels comfortable.
    I've thought of doing a dual boot with an LTS solution as a backup to ensure I can gain access to the system, but this would still be pretty resource intensive.
    If you were going to be running a system that required stability. What would you do to ensure stability? What are some other possible minimal base, but highly extendable options?
    Last edited by cynicalpsycho (2014-11-01 22:37:11)

    progandy wrote:
    cynicalpsycho wrote:Alpine seems interesting, but it also seems to be pretty under supported/documented. I'm not sure I'm ready to go on that adventure just yet. But the Xen Hypervisor does seem interesting. Why would you recommend it over say... virtualbox?
    I recommend KVM or Xen if you want to run virtual servers. For the reasons, please read about Paravirtualization (Xen and KVM) vs Emulation (Virtualbox).
    Edit: virtualbox also has some paravirtualization featues, Xen and KVM seem to be more efficient.
    theinternets wrote:
    Native virtualization (or full virtualization) is where a type-2 hypervisor is used to partially allow access to the hardware and partially to simulate hardware in order to allow you to load a full operating system. This is used by emulation packages like VMware Server, Workstation, Virtual PC, and Virtual Server.
    Paravirtualization is where the guest operating systems run on the hypervisor, allowing for higher performance and efficiency.  For more technical information and videos on this topic, visit VMware’s Technology Preview for Transparent Virtualization. Examples of paravirtualization are Microsoft Hyper-V and VMware ESX Server."
    I just learned something new... Oh, and emulations is the process of simulating hardware, ie videogame emulation, vbox would be considered native virtualization. Thanks for the tip Progandy. That is interesting indeed!

  • A thank-you to the Arch developers and contributors

    I have been using some form of Linux for the past 13 years, starting with Slackware on floppies, and ending with Arch.  Before Arch, I used Gentoo for almost two years.
    Now that I have been using Arch for around six months, all I can say is thank you.  Packages are kept up to date, configuration files are well documented and simple to edit, and pacman has not once hosed anything on my system ('emerge --update world' on Gentoo was occasionally a painful experience).
    Arch is fast, lightweight, and always up to date.  I love it!
    Thank you again to everyone contributing to the project.  You're doing a wonderful job.   
    Oh, and I would also like to thank everyone here in the Arch community.  These forums are friendly and helpful, which really does draw people to the distribution!   

    Shopko wrote:It is amazing how painful it was to download and write 28 floppy images of Slackware, just to get home and find that one of the floppies had bad sectors.
    lmbo.  You think that's painful?  Surely someone around here in Arch remembers listening to the old screeching noises coming from the analog modem "handset", running at 300 baud.  I remember jingling the modem handset on the 2 styrofoam receivers to get a "good" connection.  What the hell were those old protocols called?  I remember "Kermit", but not the others...
    Oh yeah, and magnetic tape drives.  I accidentally threw in an unmarked computer tape into my car stereo system deck once, thinking it was from "Judas Priest".  For a second there, I thought JP came out with a new song...

  • Install Release Update for Arch?

    I have not been using Arch for long. I noticed that there was a 6 month gap between the last two install releases and I was wondering if Arch developers plan to release a 2010.02 this month? I looked around and did not see anything relevant to this topic. I am unable to get 2009.08 installed (USB or CD) to boot on my system to even begin the installer (Yes I filed a bug) and would hope a new install release version will fix whatever is causing it. Anyone know if this month will have a new install release?
    *I am very aware that Arch is a rolling release and that the version pertains to the installation media only.*

    Tyriel wrote:
    EVRAMP wrote:
    Tyriel wrote:To be fair, if you are doing a net install there really is no need for a new release.  If you do a core install there is nothing pacman -Syu will not fix.  The only big difference I personally noticed between the last two versions was the introduction of ext4.
    You are right, but you can e.g. buy a new hardware where you cannot get network working and needed drivers are included in later kernel.
    That is a very good point and argument for a new release.
    One can always install in other ways than with cd, the wiki got a few.

  • Computer not responding anymore when accessing shared files (systemd)

    Hi,
    i upgraded my arch system which now uses systemd. An error appears when trying to access shared from vmware. It results in an no more responding arch Linux.
    Mounting is done via
    mount -t vmhgfs .host:/ /mnt/hgfs/
    which gives the note that
    Could not add entry to mtab, continuing"
    I could afterwards continue. When changing to the directory e.g. trying do list the files the computer stops responding.
    dmesg
    gives the following errors..
    [ 323.160271] BUG: unable to handle kernel NULL pointer dereference at 0000000000000078
    [ 323.160280] IP: [<ffffffffa02a6986>] HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
    [ 323.160289] PGD 25baf067 PUD 259c4067 PMD 0
    [ 323.160292] Oops: 0000 [#1] PREEMPT SMP
    [ 323.160295] Modules linked in: vmhgfs(O) fuse coretemp kvm_intel kvm crc32c_intel ppdev snd_ens1371 snd_ac97_codec ac97_bus gameport snd_rawmidi snd_seq_device evdev snd_pcm snd_page_alloc snd_timer vmw_balloon vmwgfx snd ttm microcode e1000 soundcore psmouse serio_raw pcspkr joydev parport_pc parport drm i2c_piix4 intel_agp i2c_core shpchp intel_gtt processor button container ac vmci(O) pci_hotplug ext4 crc16 jbd2 mbcache hid_generic usbhid hid sr_mod sd_mod cdrom uhci_hcd ata_generic mptspi pata_acpi ehci_hcd scsi_transport_spi mptscsih usbcore floppy usb_common mptbase ata_piix libata scsi_mod
    [ 323.160334] CPU 0
    [ 323.160339] Pid: 811, comm: ls Tainted: G O 3.6.4-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
    [ 323.160341] RIP: 0010:[<ffffffffa02a6986>] [<ffffffffa02a6986>] HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
    [ 323.160345] RSP: 0018:ffff880025abbc68 EFLAGS: 00010202
    [ 323.160347] RAX: ffffffffa02aa280 RBX: ffff88002c05a480 RCX: 0000000000000010
    [ 323.160348] RDX: ffff88002c05a480 RSI: 0000000000000040 RDI: ffff88002c05a480
    [ 323.160349] RBP: ffff880025abbc78 R08: 6f6c474458007471 R09: ffff880025abbde8
    [ 323.160350] R10: ffff88003c4c400a R11: 0000000000000002 R12: ffff880025abbd30
    [ 323.160352] R13: 0000000000000000 R14: ffff880025abbdd8 R15: ffff880025abbd38
    [ 323.160353] FS: 00007f5f0bd6c700(0000) GS:ffff88003f600000(0000) knlGS:0000000000000000
    [ 323.160355] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [ 323.160356] CR2: 0000000000000078 CR3: 0000000025a9c000 CR4: 00000000000007f0
    [ 323.160484] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    [ 323.160506] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    [ 323.160508] Process ls (pid: 811, threadinfo ffff880025aba000, task ffff8800371db870)
    [ 323.160509] Stack:
    [ 323.160511] ffff880025abbdd8 ffff88002c207bc0 ffff880025abbce8 ffffffff8118b285
    [ 323.160514] ffff880025a42420 ffff880025a42420 0000000200007471 ffff88002c05a480
    [ 323.160517] ffff880025a27048 000000022994b100 ffff880000000028 0000000000000000
    [ 323.160519] Call Trace:
    [ 323.160531] [<ffffffff8118b285>] lookup_fast+0x265/0x310
    [ 323.160534] [<ffffffff8118ce2f>] path_lookupat+0x10f/0x7f0
    [ 323.160538] [<ffffffff81145135>] ? handle_pte_fault+0x95/0xaa0
    [ 323.160541] [<ffffffff8118d541>] do_path_lookup+0x31/0xc0
    [ 323.160543] [<ffffffff8118ada3>] ? getname_flags+0x53/0xf0
    [ 323.160546] [<ffffffff8118fc1d>] user_path_at_empty+0x5d/0xa0
    [ 323.160551] [<ffffffff81495fd4>] ? do_page_fault+0x2c4/0x580
    [ 323.160554] [<ffffffff8114c6cd>] ? do_mmap_pgoff+0x24d/0x340
    [ 323.160557] [<ffffffff8118fc71>] user_path_at+0x11/0x20
    [ 323.160560] [<ffffffff811843c5>] vfs_fstatat+0x35/0x70
    [ 323.160563] [<ffffffff81191d87>] ? do_vfs_ioctl+0x97/0x530
    [ 323.160565] [<ffffffff8118441e>] vfs_lstat+0x1e/0x20
    [ 323.160568] [<ffffffff811845ba>] sys_newlstat+0x1a/0x40
    [ 323.160575] [<ffffffff81493165>] ? page_fault+0x25/0x30
    [ 323.160579] [<ffffffff81499ded>] system_call_fastpath+0x1a/0x1f
    [ 323.160580] Code: 38 e8 e0 84 c0 75 9e eb 98 66 2e 0f 1f 84 00 00 00 00 00 66 90 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 48 85 f6 48 89 fb 74 06 <f6> 46 38 40 75 54 48 89 df e8 4c b7 ff ff 85 c0 ba 01 00 00 00
    [ 323.160604] RIP [<ffffffffa02a6986>] HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
    [ 323.160609] RSP <ffff880025abbc68>
    [ 323.160610] CR2: 0000000000000078
    [ 323.160615] ---[ end trace 658c53aa01f4c121 ]---
    [ 323.160618] note: ls[811] exited with preempt_count 1
    [ 348.089297] BUG: soft lockup - CPU#0 stuck for 23s! [ls:811]
    [ 348.089303] Modules linked in: vmhgfs(O) fuse coretemp kvm_intel kvm crc32c_intel ppdev snd_ens1371 snd_ac97_codec ac97_bus gameport snd_rawmidi snd_seq_device evdev snd_pcm snd_page_alloc snd_timer vmw_balloon vmwgfx snd ttm microcode e1000 soundcore psmouse serio_raw pcspkr joydev parport_pc parport drm i2c_piix4 intel_agp i2c_core shpchp intel_gtt processor button container ac vmci(O) pci_hotplug ext4 crc16 jbd2 mbcache hid_generic usbhid hid sr_mod sd_mod cdrom uhci_hcd ata_generic mptspi pata_acpi ehci_hcd scsi_transport_spi mptscsih usbcore floppy usb_common mptbase ata_piix libata scsi_mod
    [ 348.089359] CPU 0
    [ 348.089375] Pid: 811, comm: ls Tainted: G D O 3.6.4-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
    [ 348.089378] RIP: 0010:[<ffffffff81082552>] [<ffffffff81082552>] lg_local_lock+0x42/0x50
    [ 348.089390] RSP: 0018:ffff880025abb858 EFLAGS: 00000297
    [ 348.089392] RAX: 000000000000009e RBX: ffffffff81274859 RCX: 000000000000009f
    [ 348.089393] RDX: ffff88003f610b90 RSI: ffffffff8119c0f0 RDI: ffffffff8184eec0
    [ 348.089394] RBP: ffff880025abb858 R08: 00000000802e002c R09: ffff880025abbfd8
    [ 348.089395] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88002994b160
    [ 348.089397] R13: 0000000000000000 R14: ffff880025adaf20 R15: ffff880025abb7c8
    [ 348.089399] FS: 0000000000000000(0000) GS:ffff88003f600000(0000) knlGS:0000000000000000
    [ 348.089400] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [ 348.089401] CR2: 0000000000000078 CR3: 000000000180c000 CR4: 00000000000007f0
    [ 348.089481] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    [ 348.089503] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    [ 348.089505] Process ls (pid: 811, threadinfo ffff880025aba000, task ffff8800371db870)
    [ 348.089506] Stack:
    [ 348.089508] ffff880025abb888 ffffffff8119ddec ffff880025abb898 ffff880029a49b58
    [ 348.089511] 0000000000000000 ffff8800371dbe68 ffff880025abb898 ffffffff8119df46
    [ 348.089514] ffff880025abb8b8 ffffffff8118a342 0000000000000000 ffff880029a49b40
    [ 348.089516] Call Trace:
    [ 348.089524] [<ffffffff8119ddec>] mntput_no_expire+0x2c/0x160
    [ 348.089527] [<ffffffff8119df46>] mntput+0x26/0x40
    [ 348.089531] [<ffffffff8118a342>] path_put+0x22/0x30
    [ 348.089535] [<ffffffff811af05a>] free_fs_struct+0x1a/0x40
    [ 348.089538] [<ffffffff811af110>] exit_fs+0x90/0xa0
    [ 348.089542] [<ffffffff8105b9cc>] do_exit+0x18c/0x940
    [ 348.089548] [<ffffffff814899ea>] ? printk+0x4d/0x4f
    [ 348.089552] [<ffffffff810594f1>] ? kmsg_dump+0xc1/0xd0
    [ 348.089556] [<ffffffff81493cdd>] oops_end+0x9d/0xe0
    [ 348.089559] [<ffffffff8148931e>] no_context+0x264/0x290
    [ 348.089562] [<ffffffff814896fe>] __bad_area_nosemaphore+0x1cf/0x1ee
    [ 348.089565] [<ffffffff81489730>] bad_area_nosemaphore+0x13/0x15
    [ 348.089567] [<ffffffff814961b0>] do_page_fault+0x4a0/0x580
    [ 348.089570] [<ffffffff814927b5>] ? _raw_spin_unlock_bh+0x25/0x30
    [ 348.089576] [<ffffffffa02a1384>] ? HgfsTransportRemovePendingRequest+0x44/0x50 [vmhgfs]
    [ 348.089579] [<ffffffffa02a1570>] ? HgfsTransportSendRequest+0x110/0x240 [vmhgfs]
    [ 348.089584] [<ffffffff8116adbc>] ? kfree+0x2c/0x150
    [ 348.089587] [<ffffffffa02a44ae>] ? HgfsBdChannelFree+0xe/0x10 [vmhgfs]
    [ 348.089591] [<ffffffffa02a1450>] ? HgfsTransportFreeRequest+0x10/0x20 [vmhgfs]
    [ 348.089594] [<ffffffffa02a0195>] ? HgfsRequestPutRef+0x25/0x30 [vmhgfs]
    [ 348.089598] [<ffffffffa02a5895>] ? HgfsPrivateGetattr+0x65/0x440 [vmhgfs]
    [ 348.089601] [<ffffffff81493165>] page_fault+0x25/0x30
    [ 348.089605] [<ffffffffa02a6986>] ? HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
    [ 348.089608] [<ffffffff8118b285>] lookup_fast+0x265/0x310
    [ 348.089611] [<ffffffff8118ce2f>] path_lookupat+0x10f/0x7f0
    [ 348.089614] [<ffffffff81145135>] ? handle_pte_fault+0x95/0xaa0
    [ 348.089617] [<ffffffff8118d541>] do_path_lookup+0x31/0xc0
    [ 348.089619] [<ffffffff8118ada3>] ? getname_flags+0x53/0xf0
    [ 348.089622] [<ffffffff8118fc1d>] user_path_at_empty+0x5d/0xa0
    [ 348.089625] [<ffffffff81495fd4>] ? do_page_fault+0x2c4/0x580
    [ 348.089628] [<ffffffff8114c6cd>] ? do_mmap_pgoff+0x24d/0x340
    [ 348.089631] [<ffffffff8118fc71>] user_path_at+0x11/0x20
    [ 348.089635] [<ffffffff811843c5>] vfs_fstatat+0x35/0x70
    [ 348.089637] [<ffffffff81191d87>] ? do_vfs_ioctl+0x97/0x530
    [ 348.089640] [<ffffffff8118441e>] vfs_lstat+0x1e/0x20
    [ 348.089643] [<ffffffff811845ba>] sys_newlstat+0x1a/0x40
    [ 348.089645] [<ffffffff81493165>] ? page_fault+0x25/0x30
    [ 348.089649] [<ffffffff81499ded>] system_call_fastpath+0x1a/0x1f
    [ 348.089650] Code: ff 01 48 8b 17 65 48 03 14 25 a8 db 00 00 b8 00 01 00 00 f0 66 0f c1 02 0f b6 cc 38 c1 74 13 66 2e 0f 1f 84 00 00 00 00 00 f3 90 <0f> b6 02 38 c8 75 f7 5d c3 0f 1f 44 00 00 55 48 89 e5 66 66 66
    [ 376.076524] BUG: soft lockup - CPU#0 stuck for 23s! [ls:811]
    [ 376.076531] Modules linked in: vmhgfs(O) fuse coretemp kvm_intel kvm crc32c_intel ppdev snd_ens1371 snd_ac97_codec ac97_bus gameport snd_rawmidi snd_seq_device evdev snd_pcm snd_page_alloc snd_timer vmw_balloon vmwgfx snd ttm microcode e1000 soundcore psmouse serio_raw pcspkr joydev parport_pc parport drm i2c_piix4 intel_agp i2c_core shpchp intel_gtt processor button container ac vmci(O) pci_hotplug ext4 crc16 jbd2 mbcache hid_generic usbhid hid sr_mod sd_mod cdrom uhci_hcd ata_generic mptspi pata_acpi ehci_hcd scsi_transport_spi mptscsih usbcore floppy usb_common mptbase ata_piix libata scsi_mod
    [ 376.076599] CPU 0
    [ 376.076605] Pid: 811, comm: ls Tainted: G D O 3.6.4-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
    [ 376.076607] RIP: 0010:[<ffffffff81082552>] [<ffffffff81082552>] lg_local_lock+0x42/0x50
    [ 376.076619] RSP: 0018:ffff880025abb858 EFLAGS: 00000297
    [ 376.076621] RAX: 000000000000009e RBX: ffffffff81274859 RCX: 000000000000009f
    [ 376.076623] RDX: ffff88003f610b90 RSI: ffffffff8119c0f0 RDI: ffffffff8184eec0
    [ 376.076624] RBP: ffff880025abb858 R08: 00000000802e002c R09: ffff880025abbfd8
    [ 376.076626] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88002994b160
    [ 376.076627] R13: 0000000000000000 R14: ffff880025adaf20 R15: ffff880025abb7c8
    [ 376.076630] FS: 0000000000000000(0000) GS:ffff88003f600000(0000) knlGS:0000000000000000
    [ 376.076631] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [ 376.076633] CR2: 0000000000000078 CR3: 000000000180c000 CR4: 00000000000007f0
    [ 376.076692] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    [ 376.076753] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    [ 376.076756] Process ls (pid: 811, threadinfo ffff880025aba000, task ffff8800371db870)
    [ 376.076757] Stack:
    [ 376.076758] ffff880025abb888 ffffffff8119ddec ffff880025abb898 ffff880029a49b58
    [ 376.076762] 0000000000000000 ffff8800371dbe68 ffff880025abb898 ffffffff8119df46
    [ 376.076764] ffff880025abb8b8 ffffffff8118a342 0000000000000000 ffff880029a49b40
    [ 376.076767] Call Trace:
    [ 376.076775] [<ffffffff8119ddec>] mntput_no_expire+0x2c/0x160
    [ 376.076777] [<ffffffff8119df46>] mntput+0x26/0x40
    [ 376.076781] [<ffffffff8118a342>] path_put+0x22/0x30
    [ 376.076786] [<ffffffff811af05a>] free_fs_struct+0x1a/0x40
    [ 376.076789] [<ffffffff811af110>] exit_fs+0x90/0xa0
    [ 376.076793] [<ffffffff8105b9cc>] do_exit+0x18c/0x940
    [ 376.076799] [<ffffffff814899ea>] ? printk+0x4d/0x4f
    [ 376.076803] [<ffffffff810594f1>] ? kmsg_dump+0xc1/0xd0
    [ 376.076808] [<ffffffff81493cdd>] oops_end+0x9d/0xe0
    [ 376.076810] [<ffffffff8148931e>] no_context+0x264/0x290
    [ 376.076813] [<ffffffff814896fe>] __bad_area_nosemaphore+0x1cf/0x1ee
    [ 376.076816] [<ffffffff81489730>] bad_area_nosemaphore+0x13/0x15
    [ 376.076818] [<ffffffff814961b0>] do_page_fault+0x4a0/0x580
    [ 376.076821] [<ffffffff814927b5>] ? _raw_spin_unlock_bh+0x25/0x30
    [ 376.076827] [<ffffffffa02a1384>] ? HgfsTransportRemovePendingRequest+0x44/0x50 [vmhgfs]
    [ 376.076831] [<ffffffffa02a1570>] ? HgfsTransportSendRequest+0x110/0x240 [vmhgfs]
    [ 376.076835] [<ffffffff8116adbc>] ? kfree+0x2c/0x150
    [ 376.076839] [<ffffffffa02a44ae>] ? HgfsBdChannelFree+0xe/0x10 [vmhgfs]
    [ 376.076843] [<ffffffffa02a1450>] ? HgfsTransportFreeRequest+0x10/0x20 [vmhgfs]
    [ 376.076846] [<ffffffffa02a0195>] ? HgfsRequestPutRef+0x25/0x30 [vmhgfs]
    [ 376.076849] [<ffffffffa02a5895>] ? HgfsPrivateGetattr+0x65/0x440 [vmhgfs]
    [ 376.076852] [<ffffffff81493165>] page_fault+0x25/0x30
    [ 376.076857] [<ffffffffa02a6986>] ? HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
    [ 376.076860] [<ffffffff8118b285>] lookup_fast+0x265/0x310
    [ 376.076863] [<ffffffff8118ce2f>] path_lookupat+0x10f/0x7f0
    [ 376.076866] [<ffffffff81145135>] ? handle_pte_fault+0x95/0xaa0
    [ 376.076869] [<ffffffff8118d541>] do_path_lookup+0x31/0xc0
    [ 376.076871] [<ffffffff8118ada3>] ? getname_flags+0x53/0xf0
    [ 376.076874] [<ffffffff8118fc1d>] user_path_at_empty+0x5d/0xa0
    [ 376.076876] [<ffffffff81495fd4>] ? do_page_fault+0x2c4/0x580
    [ 376.076880] [<ffffffff8114c6cd>] ? do_mmap_pgoff+0x24d/0x340
    [ 376.076882] [<ffffffff8118fc71>] user_path_at+0x11/0x20
    [ 376.076886] [<ffffffff811843c5>] vfs_fstatat+0x35/0x70
    [ 376.076889] [<ffffffff81191d87>] ? do_vfs_ioctl+0x97/0x530
    [ 376.076891] [<ffffffff8118441e>] vfs_lstat+0x1e/0x20
    [ 376.076894] [<ffffffff811845ba>] sys_newlstat+0x1a/0x40
    [ 376.076897] [<ffffffff81493165>] ? page_fault+0x25/0x30
    [ 376.076900] [<ffffffff81499ded>] system_call_fastpath+0x1a/0x1f
    [ 376.076901] Code: ff 01 48 8b 17 65 48 03 14 25 a8 db 00 00 b8 00 01 00 00 f0 66 0f c1 02 0f b6 cc 38 c1 74 13 66 2e 0f 1f 84 00 00 00 00 00 f3 90 <0f> b6 02 38 c8 75 f7 5d c3 0f 1f 44 00 00 55 48 89 e5 66 66 66
    [ 383.143757] INFO: rcu_preempt self-detected stall on CPU { 0} (t=18000 jiffies)
    [ 383.143768] sending NMI to all CPUs:
    [ 383.143782] NMI backtrace for cpu 0
    [ 383.143783] CPU 0
    [ 383.143788] Pid: 811, comm: ls Tainted: G D O 3.6.4-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
    [ 383.143789] RIP: 0010:[<ffffffff8103a6ec>] [<ffffffff8103a6ec>] default_send_IPI_mask_sequence_phys+0xbc/0x100
    [ 383.143809] RSP: 0018:ffff88003f603d68 EFLAGS: 00000046
    [ 383.143810] RAX: 0000000000000400 RBX: 000000000000b022 RCX: 0000000000000000
    [ 383.143811] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000300
    [ 383.143812] RBP: ffff88003f603da8 R08: ffffffff818a32b8 R09: 0000000000000000
    [ 383.143813] R10: 0000000000010002 R11: 3a73555043206c6c R12: ffffffff818a32b0
    [ 383.143815] R13: 0000000000000400 R14: 0000000000000092 R15: 0000000000000002
    [ 383.143816] FS: 0000000000000000(0000) GS:ffff88003f600000(0000) knlGS:0000000000000000
    [ 383.143818] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [ 383.143819] CR2: 0000000000000078 CR3: 000000000180c000 CR4: 00000000000007f0
    [ 383.143824] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    [ 383.143828] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    [ 383.143830] Process ls (pid: 811, threadinfo ffff880025aba000, task ffff8800371db870)
    [ 383.143831] Stack:
    [ 383.143832] ffffffff00000000 0000000000000000 ffff88003f603dc8 0000000000002710
    [ 383.143835] ffffffff81839dc0 0000000000000000 ffffffff81839e80 ffff880025aba000
    [ 383.143838] ffff88003f603db8 ffffffff8103e5e7 ffff88003f603dd8 ffffffff8103a8aa
    [ 383.143840] Call Trace:
    [ 383.143842] <IRQ>
    [ 383.143848] [<ffffffff8103e5e7>] physflat_send_IPI_all+0x17/0x20
    [ 383.143851] [<ffffffff8103a8aa>] arch_trigger_all_cpu_backtrace+0x5a/0x90
    [ 383.143857] [<ffffffff810e0f0a>] rcu_pending+0x24a/0x580
    [ 383.143859] [<ffffffff810e23b9>] rcu_check_callbacks+0xd9/0x220
    [ 383.143863] [<ffffffff81067808>] update_process_times+0x48/0x90
    [ 383.143868] [<ffffffff810ae0e4>] tick_sched_timer+0x64/0xd0
    [ 383.143871] [<ffffffff8107db27>] __run_hrtimer+0x77/0x270
    [ 383.143874] [<ffffffff810ae080>] ? tick_nohz_handler+0x110/0x110
    [ 383.143876] [<ffffffff8107e807>] hrtimer_interrupt+0xf7/0x230
    [ 383.143882] [<ffffffff8149b0fc>] ? call_softirq+0x1c/0x30
    [ 383.143886] [<ffffffff8149ba39>] smp_apic_timer_interrupt+0x69/0x99
    [ 383.143889] [<ffffffff8149aa0a>] apic_timer_interrupt+0x6a/0x70
    [ 383.143890] <EOI>
    [ 383.143897] [<ffffffff81274859>] ? __percpu_counter_add+0x59/0xa0
    [ 383.143902] [<ffffffff8119c0f0>] ? alloc_fdtable+0xf0/0xf0
    [ 383.143907] [<ffffffff81082555>] ? lg_local_lock+0x45/0x50
    [ 383.143910] [<ffffffff8119ddec>] mntput_no_expire+0x2c/0x160
    [ 383.143912] [<ffffffff8119df46>] mntput+0x26/0x40
    [ 383.143916] [<ffffffff8118a342>] path_put+0x22/0x30
    [ 383.143921] [<ffffffff811af05a>] free_fs_struct+0x1a/0x40
    [ 383.143923] [<ffffffff811af110>] exit_fs+0x90/0xa0
    [ 383.143927] [<ffffffff8105b9cc>] do_exit+0x18c/0x940
    [ 383.143932] [<ffffffff814899ea>] ? printk+0x4d/0x4f
    [ 383.143936] [<ffffffff810594f1>] ? kmsg_dump+0xc1/0xd0
    [ 383.143940] [<ffffffff81493cdd>] oops_end+0x9d/0xe0
    [ 383.143943] [<ffffffff8148931e>] no_context+0x264/0x290
    [ 383.143946] [<ffffffff814896fe>] __bad_area_nosemaphore+0x1cf/0x1ee
    [ 383.143949] [<ffffffff81489730>] bad_area_nosemaphore+0x13/0x15
    [ 383.143951] [<ffffffff814961b0>] do_page_fault+0x4a0/0x580
    [ 383.143955] [<ffffffff814927b5>] ? _raw_spin_unlock_bh+0x25/0x30
    [ 383.143961] [<ffffffffa02a1384>] ? HgfsTransportRemovePendingRequest+0x44/0x50 [vmhgfs]
    [ 383.143964] [<ffffffffa02a1570>] ? HgfsTransportSendRequest+0x110/0x240 [vmhgfs]
    [ 383.143968] [<ffffffff8116adbc>] ? kfree+0x2c/0x150
    [ 383.143972] [<ffffffffa02a44ae>] ? HgfsBdChannelFree+0xe/0x10 [vmhgfs]
    [ 383.143976] [<ffffffffa02a1450>] ? HgfsTransportFreeRequest+0x10/0x20 [vmhgfs]
    [ 383.143979] [<ffffffffa02a0195>] ? HgfsRequestPutRef+0x25/0x30 [vmhgfs]
    [ 383.143982] [<ffffffffa02a5895>] ? HgfsPrivateGetattr+0x65/0x440 [vmhgfs]
    [ 383.143985] [<ffffffff81493165>] page_fault+0x25/0x30
    [ 383.143989] [<ffffffffa02a6986>] ? HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
    [ 383.143993] [<ffffffff8118b285>] lookup_fast+0x265/0x310
    [ 383.143995] [<ffffffff8118ce2f>] path_lookupat+0x10f/0x7f0
    [ 383.143999] [<ffffffff81145135>] ? handle_pte_fault+0x95/0xaa0
    [ 383.144002] [<ffffffff8118d541>] do_path_lookup+0x31/0xc0
    [ 383.144004] [<ffffffff8118ada3>] ? getname_flags+0x53/0xf0
    [ 383.144007] [<ffffffff8118fc1d>] user_path_at_empty+0x5d/0xa0
    [ 383.144009] [<ffffffff81495fd4>] ? do_page_fault+0x2c4/0x580
    [ 383.144013] [<ffffffff8114c6cd>] ? do_mmap_pgoff+0x24d/0x340
    [ 383.144015] [<ffffffff8118fc71>] user_path_at+0x11/0x20
    [ 383.144019] [<ffffffff811843c5>] vfs_fstatat+0x35/0x70
    [ 383.144022] [<ffffffff81191d87>] ? do_vfs_ioctl+0x97/0x530
    [ 383.144025] [<ffffffff8118441e>] vfs_lstat+0x1e/0x20
    [ 383.144027] [<ffffffff811845ba>] sys_newlstat+0x1a/0x40
    [ 383.144030] [<ffffffff81493165>] ? page_fault+0x25/0x30
    [ 383.144033] [<ffffffff81499ded>] system_call_fastpath+0x1a/0x1f
    [ 383.144034] Code: 90 8b 0c 25 00 b3 5f ff 80 e5 10 75 f2 89 f0 c1 e0 18 89 04 25 10 b3 5f ff 41 83 ff 02 44 89 e8 41 0f 45 c7 89 04 25 00 b3 5f ff <eb> 8a 4c 89 f7 57 9d 66 66 90 66 90 48 83 c4 18 5b 41 5c 41 5d
    [ 383.144173] NMI backtrace for cpu 1
    [ 383.144176] CPU 1
    [ 383.144179] Pid: 0, comm: swapper/1 Tainted: G D O 3.6.4-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
    [ 383.144181] RIP: 0010:[<ffffffff81042e46>] [<ffffffff81042e46>] native_safe_halt+0x6/0x10
    [ 383.144189] RSP: 0018:ffff88003daabeb8 EFLAGS: 00000246
    [ 383.144190] RAX: 0000000000000000 RBX: ffff88003daabfd8 RCX: 0000000100006177
    [ 383.144191] RDX: ffff88003dbb07e8 RSI: 0000000000000086 RDI: 0000000000000082
    [ 383.144192] RBP: ffff88003daabeb8 R08: 0000000000000000 R09: 0000000000000000
    [ 383.144193] R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000001
    [ 383.144195] R13: ffff88003daaa000 R14: 0000000000000000 R15: 0000000000000000
    [ 383.144196] FS: 0000000000000000(0000) GS:ffff88003f620000(0000) knlGS:0000000000000000
    [ 383.144198] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    [ 383.144199] CR2: 00007fc28cd0b000 CR3: 000000003c672000 CR4: 00000000000007e0
    [ 383.144241] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    [ 383.144266] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    [ 383.144268] Process swapper/1 (pid: 0, threadinfo ffff88003daaa000, task ffff88003da3c890)
    [ 383.144269] Stack:
    [ 383.144270] ffff88003daabed8 ffffffff8101dc2f ffff88003daabfd8 ffffffff818a32b0
    [ 383.144273] ffff88003daabf18 ffffffff8101ef16 0000000000000001 2ebcddbd1c0fb65d
    [ 383.144276] ffff88003daabf08 0000000000000001 0000000000000000 0000000000000000
    [ 383.144278] Call Trace:
    [ 383.144284] [<ffffffff8101dc2f>] default_idle+0x4f/0x290
    [ 383.144286] [<ffffffff8101ef16>] cpu_idle+0xf6/0x130
    [ 383.144290] [<ffffffff814812a9>] start_secondary+0x1f9/0x200
    [ 383.144291] Code: 00 00 00 00 00 55 48 89 e5 fa 5d c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 fb 5d c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 fb f4 <5d> c3 0f 1f 84 00 00 00 00 00 55 48 89 e5 f4 5d c3 66 0f 1f 84
    [ 408.063121] BUG: soft lockup - CPU#0 stuck for 23s! [ls:811]
    [ 408.063127] Modules linked in: vmhgfs(O) fuse coretemp kvm_intel kvm crc32c_intel ppdev snd_ens1371 snd_ac97_codec ac97_bus gameport snd_rawmidi snd_seq_device evdev snd_pcm snd_page_alloc snd_timer vmw_balloon vmwgfx snd ttm microcode e1000 soundcore psmouse serio_raw pcspkr joydev parport_pc parport drm i2c_piix4 intel_agp i2c_core shpchp intel_gtt processor button container ac vmci(O) pci_hotplug ext4 crc16 jbd2 mbcache hid_generic usbhid hid sr_mod sd_mod cdrom uhci_hcd ata_generic mptspi pata_acpi ehci_hcd scsi_transport_spi mptscsih usbcore floppy usb_common mptbase ata_piix libata scsi_mod
    [ 408.063183] CPU 0
    [ 408.063188] Pid: 811, comm: ls Tainted: G D O 3.6.4-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
    [ 408.063190] RIP: 0010:[<ffffffff81082552>] [<ffffffff81082552>] lg_local_lock+0x42/0x50
    [ 408.063200] RSP: 0018:ffff880025abb858 EFLAGS: 00000297
    [ 408.063202] RAX: 000000000000009e RBX: ffffffff81274859 RCX: 000000000000009f
    [ 408.063203] RDX: ffff88003f610b90 RSI: ffffffff8119c0f0 RDI: ffffffff8184eec0
    [ 408.063204] RBP: ffff880025abb858 R08: 00000000802e002c R09: ffff880025abbfd8
    [ 408.063205] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88002994b160
    [ 408.063207] R13: 0000000000000000 R14: ffff880025adaf20 R15: ffff880025abb7c8
    [ 408.063209] FS: 0000000000000000(0000) GS:ffff88003f600000(0000) knlGS:0000000000000000
    [ 408.063210] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [ 408.063211] CR2: 0000000000000078 CR3: 000000000180c000 CR4: 00000000000007f0
    [ 408.063216] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    [ 408.063220] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    [ 408.063221] Process ls (pid: 811, threadinfo ffff880025aba000, task ffff8800371db870)
    [ 408.063222] Stack:
    [ 408.063224] ffff880025abb888 ffffffff8119ddec ffff880025abb898 ffff880029a49b58
    [ 408.063227] 0000000000000000 ffff8800371dbe68 ffff880025abb898 ffffffff8119df46
    [ 408.063229] ffff880025abb8b8 ffffffff8118a342 0000000000000000 ffff880029a49b40
    [ 408.063232] Call Trace:
    [ 408.063239] [<ffffffff8119ddec>] mntput_no_expire+0x2c/0x160
    [ 408.063242] [<ffffffff8119df46>] mntput+0x26/0x40
    [ 408.063246] [<ffffffff8118a342>] path_put+0x22/0x30
    [ 408.063250] [<ffffffff811af05a>] free_fs_struct+0x1a/0x40
    [ 408.063253] [<ffffffff811af110>] exit_fs+0x90/0xa0
    [ 408.063257] [<ffffffff8105b9cc>] do_exit+0x18c/0x940
    [ 408.063263] [<ffffffff814899ea>] ? printk+0x4d/0x4f
    [ 408.063267] [<ffffffff810594f1>] ? kmsg_dump+0xc1/0xd0
    [ 408.063271] [<ffffffff81493cdd>] oops_end+0x9d/0xe0
    [ 408.063274] [<ffffffff8148931e>] no_context+0x264/0x290
    [ 408.063277] [<ffffffff814896fe>] __bad_area_nosemaphore+0x1cf/0x1ee
    [ 408.063280] [<ffffffff81489730>] bad_area_nosemaphore+0x13/0x15
    [ 408.063282] [<ffffffff814961b0>] do_page_fault+0x4a0/0x580
    [ 408.063285] [<ffffffff814927b5>] ? _raw_spin_unlock_bh+0x25/0x30
    [ 408.063302] [<ffffffffa02a1384>] ? HgfsTransportRemovePendingRequest+0x44/0x50 [vmhgfs]
    [ 408.063306] [<ffffffffa02a1570>] ? HgfsTransportSendRequest+0x110/0x240 [vmhgfs]
    [ 408.063310] [<ffffffff8116adbc>] ? kfree+0x2c/0x150
    [ 408.063314] [<ffffffffa02a44ae>] ? HgfsBdChannelFree+0xe/0x10 [vmhgfs]
    [ 408.063317] [<ffffffffa02a1450>] ? HgfsTransportFreeRequest+0x10/0x20 [vmhgfs]
    [ 408.063320] [<ffffffffa02a0195>] ? HgfsRequestPutRef+0x25/0x30 [vmhgfs]
    [ 408.063324] [<ffffffffa02a5895>] ? HgfsPrivateGetattr+0x65/0x440 [vmhgfs]
    [ 408.063327] [<ffffffff81493165>] page_fault+0x25/0x30
    [ 408.063331] [<ffffffffa02a6986>] ? HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
    [ 408.063335] [<ffffffff8118b285>] lookup_fast+0x265/0x310
    [ 408.063337] [<ffffffff8118ce2f>] path_lookupat+0x10f/0x7f0
    [ 408.063341] [<ffffffff81145135>] ? handle_pte_fault+0x95/0xaa0
    [ 408.063343] [<ffffffff8118d541>] do_path_lookup+0x31/0xc0
    [ 408.063346] [<ffffffff8118ada3>] ? getname_flags+0x53/0xf0
    [ 408.063349] [<ffffffff8118fc1d>] user_path_at_empty+0x5d/0xa0
    [ 408.063351] [<ffffffff81495fd4>] ? do_page_fault+0x2c4/0x580
    [ 408.063354] [<ffffffff8114c6cd>] ? do_mmap_pgoff+0x24d/0x340
    [ 408.063357] [<ffffffff8118fc71>] user_path_at+0x11/0x20
    [ 408.063360] [<ffffffff811843c5>] vfs_fstatat+0x35/0x70
    [ 408.063363] [<ffffffff81191d87>] ? do_vfs_ioctl+0x97/0x530
    [ 408.063366] [<ffffffff8118441e>] vfs_lstat+0x1e/0x20
    [ 408.063368] [<ffffffff811845ba>] sys_newlstat+0x1a/0x40
    [ 408.063371] [<ffffffff81493165>] ? page_fault+0x25/0x30
    [ 408.063374] [<ffffffff81499ded>] system_call_fastpath+0x1a/0x1f
    [ 408.063375] Code: ff 01 48 8b 17 65 48 03 14 25 a8 db 00 00 b8 00 01 00 00 f0 66 0f c1 02 0f b6 cc 38 c1 74 13 66 2e 0f 1f 84 00 00 00 00 00 f3 90 <0f> b6 02 38 c8 75 f7 5d c3 0f 1f 44 00 00 55 48 89 e5 66 66 66
    Anyone got an idea what to do? Would be nice to share files between the host and guest System...
    Nik
    PS: Read these two wiki pages already but nothing helps..
    https://wiki.archlinux.org/index.php/In … _in_VMware
    https://wiki.archlinux.org/index.php/In … _(systemd)
    Last edited by nik1982 (2012-11-02 18:55:22)

    I have the same problem. Here's what journalctl gives me after I try to list the directory:
    Nov 10 14:56:31 porky kernel: BUG: unable to handle kernel paging request at ffffffffffffffa8
    Nov 10 14:56:31 porky kernel: IP: [<ffffffffa02b9078>] HgfsPermission+0x38/0xa0 [vmhgfs]
    Nov 10 14:56:31 porky kernel: PGD 180e067 PUD 180f067 PMD 0
    Nov 10 14:56:31 porky kernel: Oops: 0000 [#1] PREEMPT SMP
    Nov 10 14:56:31 porky kernel: Modules linked in: fuse e1000 joydev ppdev intel_agp snd_ens1371 snd_ac97_codec ac97_bus gameport vmwgfx snd_rawmidi snd_seq_device snd_pcm ttm snd_page_alloc snd_timer drm snd soundcore i2c_piix4 psmouse parport_pc parport shpchp intel_gtt processor coretemp crc32c_intel microcode i2c_core pci_hotplug pcspkr serio_raw evdev vmw_balloon button ac container vmhgfs(O) vmci(O) vmblock(O) ext4 crc16 jbd2 mbcache dm_mod sr_mod cdrom hid_generic ata_generic pata_acpi usbhid hid sd_mod uhci_hcd ehci_hcd usbcore usb_common ata_piix mptspi scsi_transport_spi mptscsih mptbase libata floppy vmw_pvscsi scsi_mod
    Nov 10 14:56:31 porky kernel: CPU 3
    Nov 10 14:56:31 porky kernel: Pid: 753, comm: zsh Tainted: G O 3.6.6-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
    Nov 10 14:56:31 porky kernel: RIP: 0010:[<ffffffffa02b9078>] [<ffffffffa02b9078>] HgfsPermission+0x38/0xa0 [vmhgfs]
    Nov 10 14:56:31 porky kernel: RSP: 0018:ffff88007665fe68 EFLAGS: 00010286
    Nov 10 14:56:31 porky kernel: RAX: 0000000000000000 RBX: 0000000000000010 RCX: 00000000002b5843
    Nov 10 14:56:31 porky kernel: RDX: ffff880037b1ddf0 RSI: 0000000000000010 RDI: ffff88007b0f8000
    Nov 10 14:56:31 porky kernel: RBP: ffff88007665fec8 R08: 0000000000016c20 R09: ffff88007f676c20
    Nov 10 14:56:31 porky kernel: R10: ffffffff8118ae63 R11: 0000000000000004 R12: 0000000000000010
    Nov 10 14:56:31 porky kernel: R13: ffff88007b0f8000 R14: 00007fe7e8ba7428 R15: 0000000000000000
    Nov 10 14:56:31 porky kernel: FS: 00007fe7eb1bb700(0000) GS:ffff88007f660000(0000) knlGS:0000000000000000
    Nov 10 14:56:31 porky kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    Nov 10 14:56:31 porky kernel: CR2: ffffffffffffffa8 CR3: 00000000767bb000 CR4: 00000000000007e0
    Nov 10 14:56:31 porky kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    Nov 10 14:56:31 porky kernel: DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Nov 10 14:56:31 porky kernel: Process zsh (pid: 753, threadinfo ffff88007665e000, task ffff88006d98e8d0)
    Nov 10 14:56:31 porky kernel: Stack:
    Nov 10 14:56:31 porky kernel: 0000000000000000 ffff8800379d4e40 ffff88007b0f8000 0000000200001001
    Nov 10 14:56:31 porky kernel: 0000000000000000 ffff88007a41eab8 ffff88006d98e8d0 0000000000000086
    Nov 10 14:56:31 porky kernel: ffff88007665fee8 ffffffff8107e056 0000000000000000 ffff88007b0f8000
    Nov 10 14:56:31 porky kernel: Call Trace:
    Nov 10 14:56:31 porky kernel: [<ffffffff8107e056>] ? hrtimer_try_to_cancel+0x86/0x110
    Nov 10 14:56:31 porky kernel: [<ffffffff8118b79c>] __inode_permission+0x7c/0xc0
    Nov 10 14:56:31 porky kernel: [<ffffffff8118b7f8>] inode_permission+0x18/0x50
    Nov 10 14:56:31 porky kernel: [<ffffffff8117e2fd>] sys_faccessat+0xdd/0x1c0
    Nov 10 14:56:31 porky kernel: [<ffffffff8117e3f8>] sys_access+0x18/0x20
    Nov 10 14:56:31 porky kernel: [<ffffffff81499f2d>] system_call_fastpath+0x1a/0x1f
    Nov 10 14:56:31 porky kernel: Code: 90 31 c0 40 f6 c6 10 89 f3 74 63 48 8b 97 18 01 00 00 48 8b 02 48 39 c2 75 11 eb 67 0f 1f 80 00 00 00 00 48 8b 00 48 39 c2 74 0e <8b> 48 a8 48 8d b8 50 ff ff ff 85 c9 74 ea 48 85 ff 74 45 48 8d
    Nov 10 14:56:31 porky kernel: RIP [<ffffffffa02b9078>] HgfsPermission+0x38/0xa0 [vmhgfs]
    Nov 10 14:56:31 porky kernel: RSP <ffff88007665fe68>
    Nov 10 14:56:31 porky kernel: CR2: ffffffffffffffa8
    Nov 10 14:56:31 porky kernel: ---[ end trace d9bf986dbc6c4651 ]---

  • Purchase Order with Invoice Plan

    Hi,
    I need to understand working with Invoicing plans for a Purchase Order. Especially the service PO for the rents and other related services.
    How the PO is linked to the Invoice Plan and how the process happens in SAP?
    Thanks in advance!

    Creating an Invoicing Plan  
    The following procedure describes how to create an invoicing plan with the pre-Enjoy ordering transactions (ME21, ME22, ME23).
    The procedure described is also applicable u2013 with certain restrictions u2013 to the Enjoy purchase order (ME21N, ME22N, ME23N).
    If you are using the Enjoy purchase order, you will find:
    ·         The Invoicing Plan button and the indicators for GR-based invoice verification (GR-Based IV), service-based invoice verification (Srv.-Based IV), evaluated receipt settlement (ERS), and invoice receipt (Inv. Receipt) among the item details on the Invoice tab page.
    ·         The account assignment among the item details on the Account Assignment tab page
    ·         The Goods Receipt and GR Non-Valuatedindicators among the item details on the Delivery tab page
    Prerequisites
    Vendor Master Record
    Before you can use the invoicing plan with automatic settlement, the Evaluated Receipt Settlement Delivery indicator must be set on the Purchasing Data screen in the vendor master record.
    (If you wish to enter invoicing dates manually, this is not necessary.)
    Purchase Order
    ●     We recommend using a framework order (that is a purchase order with a validity period and a reason for rejection). The invoicing plan can adopt the validity period specified in the PO header.
    ●     PO items for which you wish to use an invoicing plan must have account assignment irrespective of whether a material with a master record, a material described by a short text, or an external service is involved.
    ●     The GR/IR control facility must be set up in such a way that no goods receipt (or, in the case of services, no service entry) is expected - only an incoming invoice. If you wish to have automatic settlement, you must also set the Evaluated Receipt Settlement indicator.
    If you nevertheless wish to allow service entry sheets for the item (e.g. for information purposes only), you must set the GR Non-Val. indicator.
    Customizing
    Under Purchase Order à Invoicing Plan in Customizing for Purchasing, you can maintain data such as the desired invoicing plan types, date categories, and date descriptions.
    Procedure
           1.      Create a purchase order with account assignment (framework order).
    Click  to access the item overview (or the overview of service lines if you chose item category D for services).
           2.      Enter the desired material or service, the quantity, and the price.
           3.      Select the desired item and click  Account Assignments to access the account assignment screen. Enter the account assignment for this item.
           4.      Click  to access the item detail screen. Check that the GR/IR control indicators are set correctly on the item detail screen.
    ○     The GR and GR-Based Invoice Verification or Service-Based Invoice Verification indicators must not be set.
    ○     IR must be set.
    ○     You must set ERS if you wish to have Evaluated Receipt Settlement.
    ○     If you wish to have service entry sheets purely for information, for example, allow non-valuated goods receipt (i.e. select the GR Non-Val and GR indicators).
           5.      Choose Item ® Invoicing Plan. A window appears, in which the invoicing plan types predefined in Customizing are suggested. Choose the desired invoicing plan type and click  Continue.
    You can use the following invoicing plan types:
    ○     Periodic Invoicing Plan
    ■      You use the periodic invoicing plan if the total value of the PO item is to be invoiced in each period.
    ■      The system creates the invoicing dates automatically on the basis of the settings in Customizing.
    ■      The invoicing date and the amount to be invoiced are shown for each settlement period (e.g. month). In the case of the periodic invoicing plan, the amount represents the total value of the PO item.
    ■      You can change the suggested dates and block individual dates for automatic invoicing if necessary.
    ■      You can enter the start and end dates for the invoicing plan.
    ■      With the Dates from and Dates to fields, you can determine that an invoicing plan does not contain invoicing dates extending over the entire validity period of the purchase order but only for a certain period within that validity period. (E.g. within a validity period from 1.1. to 12.31, only dates within the period 1.1. to 06.30.)
    ■      With the Horizon field, you control how far into the future dates can be created. If you enter a date rule that adds six months to the current date here, invoicing dates will be created for just half a year in advance in each case.
    The system automatically creates new dates if you change the invoicing plan or when you invoke the transaction for Updating Periodic Invoicing Plans. See Generating Further Invoicing Plan Dates
    ■      The In Advance indicator allows you to specify whether the invoice is to be created with regard to a prior or subsequent period. (E.g. at the beginning of February, either in advance for the month of February or in arrears for the month of January).
    ■      In addition, fields with information on the existing invoicing plan are displayed (e.g. the calendar upon which the date determination process is based).
    ○     Partial Invoicing Plan
    ■      You use the partial invoicing plan if the total value of the PO item is to be invoiced in several partial amounts.
    ■      You get an empty date overview in which you can manually enter the desired dates.
    ■      If you work with a reference invoicing plan, the system automatically generates dates in accordance with the reference plan.
    You have the following options:
    ●      You create a reference invoicing plan in Customizing for the invoicing plan type.
    ●      You enter an existing invoicing plan as reference plan directly in the invoicing plan for the PO item.
    ■      You can flag a date in field B (Billing/Invoicing Rule) as follows:
    ●      As a down payment (percentage or value)
    ●      As an invoicing date (percentage or value)
    ●      As a final invoice
           6.      Click  to return to the item overview.
           7.      Click  to save the purchase order item with the invoicing plan.
    You can then start the automatic invoice creation process during invoice verification.
    For more information, refer to the section Settlement of Amounts Due Under Invoicing Plans.
    Once assigned to an item, the invoicing plan type (e.g. partial invoicing plan) cannot be changed. If you wish to assign a different invoicing plan type, you must delete the item and create a new one.
    Generating Further Invoicing Plan Dates  
    If you have assigned a periodic invoicing plan to a PO item but have not initially defined invoicing dates covering the entire validity period of the purchase order, you can generate further dates in due course.
    You have created a PO item with a periodic invoicing plan for a certain planned procurement. The purchase order is valid from 1.1. to 12.31. When creating the invoicing plan, you specified one invoicing date per month for the first half of the year. You have not yet planned any dates for the second half of the year because you do not wish information from the invoicing plan to be passed on to purchase order commitments at this stage, for example.
    By mid-June, it is clear that the PO is to proceed as envisaged, and you therefore wish to schedule invoicing dates for the remainder of its validity period.
    Procedure
    To schedule further invoicing dates, proceed as follows:
    Choose Purchase order ® Follow-on functions ® Period. invoicing plan
    Specify the purchase orders for which invoicing dates are to be generated in the invoicing plan and perform the function.
    A log can be created if desired.
    Result
    The system adds further dates on the basis of information such as the validity period or horizon from Customizing, the purchase order, and the invoicing plan.
    regards,
    indranil

  • Boot time goes from seconds to minutes with udev and systemd

    A few weeks ago updated and saw that on reboot I was getting messages from systemd that it was waiting for all my LVM partitions, and then finally that:
    'A start job is running for udev Wait for Complete Device Initialization'
    This has never happened before and I can't find any information about it in dmesg.
    Here is my fstab:
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    # UUID=f9f12b36-2333-4c46-949a-0bd86e1ab254
    /dev/mapper/Linux-Arch / ext4 rw,relatime,data=ordered 0 1
    # UUID=21ee7aa4-234e-463d-af2a-6c4cb3551ea8
    /dev/mapper/Linux-Home /home ext4 rw,relatime,data=ordered 0 2
    # UUID=E421-470F LABEL=SYSTEM_DRV
    /dev/sda2 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
    # UUID=11bf5a3f-86a5-48b7-93da-994e39463f0d
    /dev/mapper/Linux-Swap none swap defaults 0 0
    # Windows
    # /dev/sda5 /mnt/Windows ntfs-3g defaults,ro,noauto 0 0
    I've been digging around for a few weeks and I can't find anything and my boot time is really slow.
    systemd-analyze blame:
    1min 1.644s systemd-udev-settle.service
    10.079s systemd-udev-trigger.service
    9.999s systemd-remount-fs.service
    1.003s lvm2-pvscan@8:8.service
    795ms systemd-timesyncd.service
    700ms systemd-update-utmp.service
    583ms systemd-sysctl.service
    560ms rtkit-daemon.service
    469ms udisks2.service
    449ms NetworkManager.service
    438ms kmod-static-nodes.service
    363ms systemd-vconsole-setup.service
    214ms tmp.mount
    184ms sys-kernel-debug.mount
    144ms sys-kernel-config.mount
    123ms systemd-tmpfiles-clean.service
    116ms dev-mqueue.mount
    90ms [email protected]
    85ms systemd-logind.service
    82ms dev-hugepages.mount
    79ms bluetooth.service
    57ms [email protected]
    42ms polkit.service
    31ms accounts-daemon.service
    31ms wpa_supplicant.service
    24ms systemd-fsck@dev-mapper-Linux\x2dHome.service
    20ms colord.service
    20ms gdm.service
    20ms upower.service
    19ms [email protected]
    18ms [email protected]
    17ms [email protected]
    15ms boot.mount
    12ms systemd-tmpfiles-setup-dev.service
    8ms dev-mapper-Linux\x2dSwap.swap
    8ms systemd-tmpfiles-setup.service
    8ms systemd-journal-flush.service
    5ms home.mount
    5ms systemd-user-sessions.service
    4ms systemd-backlight@backlight:intel_backlight.service
    3ms systemd-random-seed.service
    2ms systemd-udevd.service
    1ms sys-fs-fuse-connections.mount
    EDIT 2: Dmesg output:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.14.23-1-lts (nobody@home-andyrtr-arch64-chroots-testing-x86_64-andyrtr) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP Thu Oct 30 19:41:12 CET 2014
    [ 0.000000] Command line: initrd=\initramfs-linux-lts.img root=/dev/mapper/Linux-Arch rw resume=/dev/mapper/Linux-Swap pcie_aspm=force i915.i915_enable_rc6=1
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c4daffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c4db0000-0x00000000c61affff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c61b0000-0x00000000ca7befff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ca7bf000-0x00000000caebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000caebf000-0x00000000cafbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cafbf000-0x00000000caffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed98000-0x00000000fed9ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffcc0000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] e820: update [mem 0xc3217018-0xc3227057] usable ==> usable
    [ 0.000000] extended physical RAM map:
    [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000040005000-0x00000000c3217017] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000c3217018-0x00000000c3227057] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000c3227058-0x00000000c4daffff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000c4db0000-0x00000000c61affff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000c61b0000-0x00000000ca7befff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000ca7bf000-0x00000000caebefff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000caebf000-0x00000000cafbefff] ACPI NVS
    [ 0.000000] reserve setup_data: [mem 0x00000000cafbf000-0x00000000caffefff] ACPI data
    [ 0.000000] reserve setup_data: [mem 0x00000000cafff000-0x00000000caffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed98000-0x00000000fed9ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000ffcc0000-0x00000000ffffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000022f5fffff] usable
    [ 0.000000] efi: EFI v2.31 by INSYDE Corp.
    [ 0.000000] efi: ACPI=0xcaffe000 ACPI 2.0=0xcaffe014 SMBIOS=0xcaebef98
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
    [ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
    [ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000006f000) (0MB)
    [ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
    [ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
    [ 0.000000] efi: mem05: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
    [ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f62000) (15MB)
    [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001f62000-0x0000000020000000) (480MB)
    [ 0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x0000000040004000) (510MB)
    [ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000040005000-0x000000007fba4000) (1019MB)
    [ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x000000007fba4000-0x0000000080000000) (4MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000080000000-0x00000000c31c0000) (1073MB)
    [ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000c31c0000-0x00000000c31e0000) (0MB)
    [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000c31e0000-0x00000000c3217000) (0MB)
    [ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x00000000c3217000-0x00000000c3228000) (0MB)
    [ 0.000000] efi: mem18: type=1, attr=0xf, range=[0x00000000c3228000-0x00000000c418a000) (15MB)
    [ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000c418a000-0x00000000c4db0000) (12MB)
    [ 0.000000] efi: mem20: type=0, attr=0xf, range=[0x00000000c4db0000-0x00000000c61b0000) (20MB)
    [ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000c61b0000-0x00000000c61b8000) (0MB)
    [ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000c61b8000-0x00000000c61bb000) (0MB)
    [ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000c61bb000-0x00000000c61bc000) (0MB)
    [ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x00000000c61bc000-0x00000000c61bf000) (0MB)
    [ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000c61bf000-0x00000000c63a8000) (1MB)
    [ 0.000000] efi: mem26: type=1, attr=0xf, range=[0x00000000c63a8000-0x00000000c63bf000) (0MB)
    [ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000c63bf000-0x00000000c76e6000) (19MB)
    [ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000c76e6000-0x00000000c864a000) (15MB)
    [ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000c864a000-0x00000000c864c000) (0MB)
    [ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000c864c000-0x00000000c864e000) (0MB)
    [ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000c864e000-0x00000000c8650000) (0MB)
    [ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000c8650000-0x00000000c8697000) (0MB)
    [ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000c8697000-0x00000000c8699000) (0MB)
    [ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000c8699000-0x00000000c86cb000) (0MB)
    [ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000c86cb000-0x00000000c86cc000) (0MB)
    [ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000c86cc000-0x00000000c87ff000) (1MB)
    [ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000c87ff000-0x00000000c8803000) (0MB)
    [ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000c8803000-0x00000000c8806000) (0MB)
    [ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000c8806000-0x00000000c8807000) (0MB)
    [ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000c8807000-0x00000000c885a000) (0MB)
    [ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000c885a000-0x00000000c8882000) (0MB)
    [ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000c8882000-0x00000000c88b0000) (0MB)
    [ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000c88b0000-0x00000000c88b1000) (0MB)
    [ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000c88b1000-0x00000000c8c65000) (3MB)
    [ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x00000000c8c65000-0x00000000c8c67000) (0MB)
    [ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000c8c67000-0x00000000c8c78000) (0MB)
    [ 0.000000] efi: mem47: type=7, attr=0xf, range=[0x00000000c8c78000-0x00000000c8c7a000) (0MB)
    [ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x00000000c8c7a000-0x00000000ca3bf000) (23MB)
    [ 0.000000] efi: mem49: type=7, attr=0xf, range=[0x00000000ca3bf000-0x00000000ca435000) (0MB)
    [ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x00000000ca435000-0x00000000ca7bf000) (3MB)
    [ 0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x00000000ca7bf000-0x00000000ca865000) (0MB)
    [ 0.000000] efi: mem52: type=6, attr=0x800000000000000f, range=[0x00000000ca865000-0x00000000ca866000) (0MB)
    [ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000ca866000-0x00000000ca868000) (0MB)
    [ 0.000000] efi: mem54: type=6, attr=0x800000000000000f, range=[0x00000000ca868000-0x00000000ca869000) (0MB)
    [ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000ca869000-0x00000000ca86f000) (0MB)
    [ 0.000000] efi: mem56: type=6, attr=0x800000000000000f, range=[0x00000000ca86f000-0x00000000ca870000) (0MB)
    [ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000ca870000-0x00000000ca883000) (0MB)
    [ 0.000000] efi: mem58: type=6, attr=0x800000000000000f, range=[0x00000000ca883000-0x00000000ca884000) (0MB)
    [ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000ca884000-0x00000000ca894000) (0MB)
    [ 0.000000] efi: mem60: type=6, attr=0x800000000000000f, range=[0x00000000ca894000-0x00000000ca895000) (0MB)
    [ 0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ca895000-0x00000000ca8a9000) (0MB)
    [ 0.000000] efi: mem62: type=6, attr=0x800000000000000f, range=[0x00000000ca8a9000-0x00000000ca8aa000) (0MB)
    [ 0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000ca8aa000-0x00000000ca8e3000) (0MB)
    [ 0.000000] efi: mem64: type=6, attr=0x800000000000000f, range=[0x00000000ca8e3000-0x00000000ca935000) (0MB)
    [ 0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000ca935000-0x00000000ca9bf000) (0MB)
    [ 0.000000] efi: mem66: type=6, attr=0x800000000000000f, range=[0x00000000ca9bf000-0x00000000caabf000) (1MB)
    [ 0.000000] efi: mem67: type=0, attr=0xf, range=[0x00000000caabf000-0x00000000caebf000) (4MB)
    [ 0.000000] efi: mem68: type=10, attr=0xf, range=[0x00000000caebf000-0x00000000cafbf000) (1MB)
    [ 0.000000] efi: mem69: type=9, attr=0xf, range=[0x00000000cafbf000-0x00000000cafff000) (0MB)
    [ 0.000000] efi: mem70: type=4, attr=0xf, range=[0x00000000cafff000-0x00000000cb000000) (0MB)
    [ 0.000000] efi: mem71: type=7, attr=0xf, range=[0x0000000100000000-0x000000022f600000) (4854MB)
    [ 0.000000] efi: mem72: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem73: type=0, attr=0x0, range=[0x00000000cb000000-0x00000000cfa00000) (74MB)
    [ 0.000000] efi: mem74: type=11, attr=0x8000000000000001, range=[0x00000000f0000000-0x00000000f4000000) (64MB)
    [ 0.000000] efi: mem75: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
    [ 0.000000] efi: mem76: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem77: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
    [ 0.000000] efi: mem78: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem79: type=0, attr=0x0, range=[0x00000000fed98000-0x00000000feda0000) (0MB)
    [ 0.000000] efi: mem80: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem81: type=11, attr=0x8000000000000000, range=[0x00000000ffcc0000-0x0000000100000000) (3MB)
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: LENOVO 20175/INVALID, BIOS 66CN54WW 01/21/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x22f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
    [ 0.000000] 3 base 0C8000000 mask FFE000000 write-back
    [ 0.000000] 4 base 0CA000000 mask FFF000000 write-back
    [ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 6 base 100000000 mask F00000000 write-back
    [ 0.000000] 7 base 200000000 mask FC0000000 write-back
    [ 0.000000] 8 base 22F600000 mask FFFE00000 uncachable
    [ 0.000000] 9 base 22F800000 mask FFF800000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
    [ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
    [ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x22f400000-0x22f5fffff]
    [ 0.000000] [mem 0x22f400000-0x22f5fffff] page 2M
    [ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22f3fffff]
    [ 0.000000] [mem 0x22c000000-0x22f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
    [ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
    [ 0.000000] BRK [0x01b45000, 0x01b45fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0xc4daffff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0xc4bfffff] page 2M
    [ 0.000000] [mem 0xc4c00000-0xc4daffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xc61b0000-0xca7befff]
    [ 0.000000] [mem 0xc61b0000-0xc61fffff] page 4k
    [ 0.000000] [mem 0xc6200000-0xca5fffff] page 2M
    [ 0.000000] [mem 0xca600000-0xca7befff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
    [ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x7fba4000-0x7fffffff]
    [ 0.000000] ACPI: RSDP 00000000caffe014 000024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 00000000caffe210 0000DC (v01 LENOVO CB-01 00000001 01000013)
    [ 0.000000] ACPI: FACP 00000000caff5000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DSDT 00000000cafe9000 008814 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FACS 00000000cafbb000 000040
    [ 0.000000] ACPI: SLIC 00000000caffd000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: UEFI 00000000caffc000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caffb000 000662 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caffa000 000A39 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caff9000 000098 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caff8000 000058 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caff7000 000757 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASF! 00000000caff6000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: HPET 00000000caff4000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: APIC 00000000caff3000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MCFG 00000000caff2000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: WDAT 00000000cafe8000 000224 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000cafe6000 001068 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 00000000cafe4000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASPT 00000000cafe2000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DBGP 00000000cafe1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FPDT 00000000cafdf000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MSDM 00000000cafde000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000cafdd000 0009AA (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000cafdc000 000B22 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DMAR 00000000cafdb000 0000B8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BGRT 00000000cafda000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22f5fffff]
    [ 0.000000] NODE_DATA [mem 0x22f5f1000-0x22f5f5fff]
    [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226c00000-ffff88022ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x22f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00087fff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0xc4daffff]
    [ 0.000000] node 0: [mem 0xc61b0000-0xca7befff]
    [ 0.000000] node 0: [mem 0xcafff000-0xcaffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x22f5fffff]
    [ 0.000000] On node 0 totalpages: 2066246
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 22 pages reserved
    [ 0.000000] DMA zone: 3975 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12807 pages used for memmap
    [ 0.000000] DMA32 zone: 819647 pages, LIFO batch:31
    [ 0.000000] Normal zone: 19416 pages used for memmap
    [ 0.000000] Normal zone: 1242624 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc3217000-0xc3217fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc3227000-0xc3227fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc4db0000-0xc61affff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xca7bf000-0xcaebefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcaebf000-0xcafbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcafbf000-0xcaffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed97fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed98000-0xfed9ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcbffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffcc0000-0xffffffff]
    [ 0.000000] e820: [mem 0xcfa00000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022f200000 s86656 r8192 d23936 u262144
    [ 0.000000] pcpu-alloc: s86656 r8192 d23936 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2033937
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: initrd=\initramfs-linux-lts.img root=/dev/mapper/Linux-Arch rw resume=/dev/mapper/Linux-Swap pcie_aspm=force i915.i915_enable_rc6=1
    [ 0.000000] PCIe ASPM is forcibly enabled
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7988560K/8264984K available (5187K kernel code, 858K rwdata, 1640K rodata, 1136K init, 1300K bss, 276424K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2494.263 MHz processor
    [ 0.000042] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.52 BogoMIPS (lpj=24942630)
    [ 0.000045] pid_max: default: 32768 minimum: 301
    [ 0.000053] ACPI: Core revision 20131218
    [ 0.008110] ACPI: All ACPI Tables successfully acquired
    [ 0.034617] Security Framework initialized
    [ 0.034625] Yama: becoming mindful.
    [ 0.035238] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.037855] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.039006] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.039017] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.039253] Initializing cgroup subsys memory
    [ 0.039259] Initializing cgroup subsys devices
    [ 0.039260] Initializing cgroup subsys freezer
    [ 0.039262] Initializing cgroup subsys net_cls
    [ 0.039264] Initializing cgroup subsys blkio
    [ 0.039291] CPU: Physical Processor ID: 0
    [ 0.039293] CPU: Processor Core ID: 0
    [ 0.039298] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.039769] mce: CPU supports 7 MCE banks
    [ 0.039782] CPU0: Thermal monitoring enabled (TM1)
    [ 0.039792] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    tlb_flushall_shift: 2
    [ 0.039910] Freeing SMP alternatives memory: 20K (ffffffff819f4000 - ffffffff819f9000)
    [ 0.043468] ftrace: allocating 20111 entries in 79 pages
    [ 0.054896] dmar: Host address width 36
    [ 0.054899] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.054906] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [ 0.054908] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.054912] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.054914] dmar: RMRR base: 0x000000cae8c000 end: 0x000000caeabfff
    [ 0.054915] dmar: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff
    [ 0.054992] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
    [ 0.054994] HPET id 0 under DRHD base 0xfed91000
    [ 0.054995] Queued invalidation will be enabled to support x2apic and Intr-remapping.
    [ 0.055169] Enabled IRQ remapping in x2apic mode
    [ 0.055170] Enabling x2apic
    [ 0.055172] Enabled x2apic
    [ 0.055180] Switched APIC routing to cluster x2apic.
    [ 0.055649] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.155770] smpboot: CPU0: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.155781] TSC deadline timer enabled
    [ 0.155793] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.155800] ... version: 3
    [ 0.155802] ... bit width: 48
    [ 0.155803] ... generic registers: 4
    [ 0.155804] ... value mask: 0000ffffffffffff
    [ 0.155805] ... max period: 0000ffffffffffff
    [ 0.155806] ... fixed-purpose events: 3
    [ 0.155807] ... event mask: 000000070000000f
    [ 0.157083] x86: Booting SMP configuration:
    [ 0.157086] .... node #0, CPUs: #1 #2 #3
    [ 0.198397] x86: Booted up 1 node, 4 CPUs
    [ 0.198401] smpboot: Total of 4 processors activated (19954.10 BogoMIPS)
    [ 0.202933] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.203185] devtmpfs: initialized
    [ 0.206444] PM: Registering ACPI NVS region [mem 0xcaebf000-0xcafbefff] (1048576 bytes)
    [ 0.207361] pinctrl core: initialized pinctrl subsystem
    [ 0.207403] RTC time: 18:04:53, date: 11/03/14
    [ 0.207440] NET: Registered protocol family 16
    [ 0.207534] cpuidle: using governor ladder
    [ 0.207535] cpuidle: using governor menu
    [ 0.207568] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.207570] ACPI: bus type PCI registered
    [ 0.207572] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.207648] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.207651] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.207745] PCI: Using configuration type 1 for base access
    [ 0.208531] bio: create slab <bio-0> at 0
    [ 0.208645] ACPI: Added _OSI(Module Device)
    [ 0.208647] ACPI: Added _OSI(Processor Device)
    [ 0.208648] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.208649] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.211733] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.236410] ACPI: SSDT 00000000cae17018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
    [ 0.236803] ACPI: Dynamic OEM Table Load:
    [ 0.236805] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
    [ 0.266214] ACPI: SSDT 00000000cae18a98 000303 (v01 PmRef ApIst 00003000 INTL 20121220)
    [ 0.266634] ACPI: Dynamic OEM Table Load:
    [ 0.266636] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20121220)
    [ 0.296118] ACPI: SSDT 00000000cae16d98 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
    [ 0.296501] ACPI: Dynamic OEM Table Load:
    [ 0.296503] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
    [ 0.773800] ACPI: Interpreter enabled
    [ 0.773808] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
    [ 0.773813] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
    [ 0.773829] ACPI: (supports S0 S3 S4 S5)
    [ 0.773831] ACPI: Using IOAPIC for interrupt routing
    [ 0.773864] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.774030] ACPI: No dock devices found.
    [ 0.780437] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.780443] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.780579] \_SB_.PCI0:_OSC invalid UUID
    [ 0.780581] _OSC request data:1 1f 0
    [ 0.780585] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 0.781130] PCI host bridge to bus 0000:00
    [ 0.781133] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.781136] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.781137] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.781139] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.781141] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.781143] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.781145] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.781147] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [ 0.781148] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.781150] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.781152] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.781154] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.781156] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.781157] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.781159] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.781161] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.781163] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
    [ 0.781171] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.781277] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.781291] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
    [ 0.781299] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.781305] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
    [ 0.781403] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
    [ 0.781415] pci 0000:00:04.0: reg 0x10: [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.781541] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.781567] pci 0000:00:14.0: reg 0x10: [mem 0xe0400000-0xe040ffff 64bit]
    [ 0.781646] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.781694] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.781745] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.781772] pci 0000:00:16.0: reg 0x10: [mem 0xe041c000-0xe041c00f 64bit]
    [ 0.781856] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.781955] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.781980] pci 0000:00:1a.0: reg 0x10: [mem 0xe0421000-0xe04213ff]
    [ 0.782080] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.782144] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.782193] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.782212] pci 0000:00:1b.0: reg 0x10: [mem 0xe0418000-0xe041bfff 64bit]
    [ 0.782296] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.782345] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.782396] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.782420] pci 0000:00:1d.0: reg 0x10: [mem 0xe0420000-0xe04203ff]
    [ 0.782520] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.782583] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.782634] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
    [ 0.782828] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.782850] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f]
    [ 0.782859] pci 0000:00:1f.2: reg 0x14: [io 0x2094-0x2097]
    [ 0.782869] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087]
    [ 0.782877] pci 0000:00:1f.2: reg 0x1c: [io 0x2090-0x2093]
    [ 0.782887] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f]
    [ 0.782897] pci 0000:00:1f.2: reg 0x24: [mem 0xe041f000-0xe041f7ff]
    [ 0.782948] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.783031] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.783050] pci 0000:00:1f.3: reg 0x10: [mem 0xe041d000-0xe041d0ff 64bit]
    [ 0.783074] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f]
    [ 0.783173] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
    [ 0.783198] pci 0000:00:1f.6: reg 0x10: [mem 0xe041e000-0xe041efff 64bit]
    [ 0.783553] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783614] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783672] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783732] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783790] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783848] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783908] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783966] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.784076] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 0.784121] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.784209] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.784212] vgaarb: loaded
    [ 0.784213] vgaarb: bridge control possible 0000:00:02.0
    [ 0.784333] PCI: Using ACPI for IRQ routing
    [ 0.786165] PCI: pci_cache_line_size set to 64 bytes
    [ 0.786172] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.786212] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
    [ 0.786214] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 0.786216] e820: reserve RAM buffer [mem 0xc3217018-0xc3ffffff]
    [ 0.786217] e820: reserve RAM buffer [mem 0xc4db0000-0xc7ffffff]
    [ 0.786219] e820: reserve RAM buffer [mem 0xca7bf000-0xcbffffff]
    [ 0.786221] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
    [ 0.786222] e820: reserve RAM buffer [mem 0x22f600000-0x22fffffff]
    [ 0.786315] NetLabel: Initializing
    [ 0.786317] NetLabel: domain hash size = 128
    [ 0.786318] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.786331] NetLabel: unlabeled traffic allowed by default
    [ 0.786356] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.786361] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.788395] Switched to clocksource hpet
    [ 0.793449] pnp: PnP ACPI init
    [ 0.793466] ACPI: bus type PNP registered
    [ 0.793581] pnp 00:00: [dma 4]
    [ 0.793609] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.793633] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.793732] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.793773] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.793820] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 0.793822] system 00:04: [io 0x1000-0x100f] has been reserved
    [ 0.793824] system 00:04: [io 0xffff] has been reserved
    [ 0.793826] system 00:04: [io 0xffff] has been reserved
    [ 0.793829] system 00:04: [io 0x0400-0x0453] could not be reserved
    [ 0.793831] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 0.793833] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 0.793835] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 0.793838] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.793870] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.793919] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.793922] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.793963] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.794001] pnp 00:08: Plug and Play ACPI device, IDs SYN2b01 SYN2b00 SYN0002 PNP0f13 (active)
    [ 0.794134] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.794137] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.794139] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.794141] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.794143] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.794145] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.794148] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 0.794150] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.794152] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.794154] system 00:09: [mem 0xcfa00000-0xcfa00fff] has been reserved
    [ 0.794157] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.794451] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.794453] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
    [ 0.794456] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.794473] pnp: PnP ACPI: found 11 devices
    [ 0.794475] ACPI: bus type PNP unregistered
    [ 0.801229] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfa08000-0xcfa0ffff 64bit]
    [ 0.801237] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.801239] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.801241] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.801243] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.801245] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.801247] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.801249] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    [ 0.801251] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    [ 0.801253] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    [ 0.801254] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    [ 0.801256] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    [ 0.801258] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
    [ 0.801260] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
    [ 0.801262] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
    [ 0.801264] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
    [ 0.801266] pci_bus 0000:00: resource 19 [mem 0xcfa00000-0xfeafffff]
    [ 0.801299] NET: Registered protocol family 2
    [ 0.801504] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.801681] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.801864] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.801881] TCP: reno registered
    [ 0.801894] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.801927] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.802001] NET: Registered protocol family 1
    [ 0.802012] pci 0000:00:02.0: Boot video device
    [ 0.838581] PCI: CLS 64 bytes, default 64
    [ 0.838623] Unpacking initramfs...
    [ 0.931743] Freeing initrd memory: 4464K (ffff88007fba4000 - ffff880080000000)
    [ 0.931755] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.931757] software IO TLB [mem 0xbf1c0000-0xc31c0000] (64MB) mapped at [ffff8800bf1c0000-ffff8800c31bffff]
    [ 0.931789] Simple Boot Flag at 0x44 set to 0x1
    [ 0.932025] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
    [ 0.932033] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
    [ 0.932042] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
    [ 0.932051] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
    [ 0.932111] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.932127] Scanning for low memory corruption every 60 seconds
    [ 0.932408] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [ 0.948267] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.949675] zbud: loaded
    [ 0.949848] VFS: Disk quotas dquot_6.5.2
    [ 0.949897] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.950024] msgmni has been set to 15732
    [ 0.950080] Key type big_key registered
    [ 0.950224] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.950262] io scheduler noop registered
    [ 0.950265] io scheduler deadline registered (default)
    [ 0.950296] io scheduler cfq registered
    [ 0.950355] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.950370] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.950401] efifb: probing for efifb
    [ 0.950423] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 5628k, total 5625k
    [ 0.950425] efifb: mode is 1600x900x32, linelength=6400, pages=1
    [ 0.950426] efifb: scrolling: redraw
    [ 0.950428] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.955222] Console: switching to colour frame buffer device 200x56
    [ 0.959939] fb0: EFI VGA frame buffer device
    [ 0.959947] intel_idle: MWAIT substates: 0x21120
    [ 0.959948] intel_idle: v0.4 model 0x3A
    [ 0.959949] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.960140] GHES: HEST is not enabled!
    [ 0.960192] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.960674] Linux agpgart interface v0.103
    [ 0.960719] rtc_cmos 00:05: RTC can wake from S4
    [ 0.960854] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.960891] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.960901] Intel P-state driver initializing.
    [ 0.960913] Intel pstate controlling: cpu 0
    [ 0.960933] Intel pstate controlling: cpu 1
    [ 0.960948] Intel pstate controlling: cpu 2
    [ 0.960965] Intel pstate controlling: cpu 3
    [ 0.960993] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.961133] TCP: cubic registered
    [ 0.961239] NET: Registered protocol family 10
    [ 0.961427] NET: Registered protocol family 17
    [ 0.961965] registered taskstats version 1
    [ 0.962642] Magic number: 6:677:88
    [ 0.962705] acpi INT3F0D:00: hash matches
    [ 0.962828] rtc_cmos 00:05: setting system clock to 2014-11-03 18:04:54 UTC (1415037894)
    [ 0.963002] PM: Checking hibernation image partition /dev/mapper/Linux-Swap
    [ 0.963010] PM: Hibernation image not present or could not be loaded.
    [ 0.964972] Freeing unused kernel memory: 1136K (ffffffff818d8000 - ffffffff819f4000)
    [ 0.964975] Write protecting the kernel read-only data: 8192k
    [ 0.970240] Freeing unused kernel memory: 944K (ffff880001514000 - ffff880001600000)
    [ 0.971926] Freeing unused kernel memory: 408K (ffff88000179a000 - ffff880001800000)
    [ 0.980028] random: systemd-tmpfile urandom read with 3 bits of entropy available
    [ 0.981987] systemd-udevd[57]: starting version 216
    [ 0.993396] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.999168] ACPI: bus type USB registered
    [ 0.999188] usbcore: registered new interface driver usbfs
    [ 0.999195] usbcore: registered new interface driver hub
    [ 0.999618] SCSI subsystem initialized
    [ 0.999671] usbcore: registered new device driver usb
    [ 1.000171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.000324] ehci-pci: EHCI PCI platform driver
    [ 1.000472] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 1.000479] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.000498] ehci-pci 0000:00:1a.0: debug port 2
    [ 1.001114] libata version 3.00 loaded.
    [ 1.004412] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.004425] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe0421000
    [ 1.005570] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.005576] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.018706] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.018976] hub 1-0:1.0: USB hub found
    [ 1.018989] hub 1-0:1.0: 2 ports detected
    [ 1.019277] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 1.019281] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.019293] ehci-pci 0000:00:1d.0: debug port 2
    [ 1.023202] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.023218] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe0420000
    [ 1.028001] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.038738] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.039375] hub 2-0:1.0: USB hub found
    [ 1.039401] hub 2-0:1.0: 2 ports detected
    [ 1.039970] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.039984] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 1.040112] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 1.040137] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
    [ 1.040384] hub 3-0:1.0: USB hub found
    [ 1.040404] hub 3-0:1.0: 4 ports detected
    [ 1.040970] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.040975] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 1.041377] hub 4-0:1.0: USB hub found
    [ 1.041406] hub 4-0:1.0: 4 ports detected
    [ 1.041933] ahci 0000:00:1f.2: version 3.0
    [ 1.042141] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 1.042189] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1 impl SATA mode
    [ 1.042192] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 1.042951] scsi0 : ahci
    [ 1.043089] scsi1 : ahci
    [ 1.043205] scsi2 : ahci
    [ 1.043321] scsi3 : ahci
    [ 1.043443] scsi4 : ahci
    [ 1.043605] scsi5 : ahci
    [ 1.043699] ata1: SATA max UDMA/133 abar m2048@0xe041f000 port 0xe041f100 irq 43
    [ 1.043704] ata2: DUMMY
    [ 1.043707] ata3: DUMMY
    [ 1.043709] ata4: DUMMY
    [ 1.043711] ata5: DUMMY
    [ 1.043713] ata6: DUMMY
    [ 1.339195] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 1.389168] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.390125] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 1.390134] ata1.00: ATA-9: SAMSUNG MZMTD256HAGM-000L1, DXT42L0Q, max UDMA/133
    [ 1.390139] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.390821] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 1.390986] ata1.00: configured for UDMA/133
    [ 1.391372] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMTD256 DXT4 PQ: 0 ANSI: 5
    [ 1.401296] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 1.401579] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.401588] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.401790] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.404906] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
    [ 1.406850] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.490272] hub 1-1:1.0: USB hub found
    [ 1.490465] hub 1-1:1.0: 6 ports detected
    [ 1.512747] device-mapper: uevent: version 1.0.3
    [ 1.512926] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
    [ 1.519284] bio: create slab <bio-1> at 1
    [ 1.545404] PM: Starting manual resume from disk
    [ 1.545409] PM: Hibernation image partition 254:0 present
    [ 1.545411] PM: Looking for hibernation image.
    [ 1.545576] PM: Image not found (code -22)
    [ 1.545578] PM: Hibernation image not present or could not be loaded.
    [ 1.579429] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
    [ 1.579432] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
    [ 1.583409] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.584558] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
    [ 1.584561] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
    [ 1.609376] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 1.665486] systemd[1]: Mounting cgroup to /sys/fs/cgroup/cpuset of type cgroup with options cpuset.
    [ 1.665742] systemd[1]: Mounting cgroup to /sys/fs/cgroup/cpu,cpuacct of type cgroup with options cpu,cpuacct.
    [ 1.665813] systemd[1]: Mounting cgroup to /sys/fs/cgroup/memory of type cgroup with options memory.
    [ 1.665853] systemd[1]: Mounting cgroup to /sys/fs/cgroup/devices of type cgroup with options devices.
    [ 1.665880] systemd[1]: Mounting cgroup to /sys/fs/cgroup/freezer of type cgroup with options freezer.
    [ 1.665906] systemd[1]: Mounting cgroup to /sys/fs/cgroup/net_cls of type cgroup with options net_cls.
    [ 1.665932] systemd[1]: Mounting cgroup to /sys/fs/cgroup/blkio of type cgroup with options blkio.
    [ 1.665987] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
    [ 1.666093] systemd[1]: Detected architecture 'x86-64'.
    [ 1.667499] systemd[1]: Set hostname to <arch-yogi>.
    [ 1.668059] systemd[1]: Using cgroup controller name=systemd. File system hierarchy is at /sys/fs/cgroup/systemd.
    [ 1.668094] systemd[1]: Installed release agent.
    [ 1.668133] systemd[1]: Set up TFD_TIMER_CANCEL_ON_SET timerfd.
    [ 1.669521] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-getty-generator as 147.
    [ 1.669581] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-gpt-auto-generator as 148.
    [ 1.669637] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-fstab-generator as 149.
    [ 1.669689] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-system-update-generator as 150.
    [ 1.669743] systemd[146]: Spawned /usr/lib/systemd/system-generators/lvm2-activation-generator as 151.
    [ 1.669826] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-efi-boot-generator as 152.
    [ 1.669899] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-debug-generator as 153.
    [ 1.669992] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-cryptsetup-generator as 154.
    [ 1.671020] systemd[146]: /usr/lib/systemd/system-generators/systemd-getty-generator succeeded.
    [ 1.677317] systemd[146]: /usr/lib/systemd/system-generators/systemd-gpt-auto-generator succeeded.
    [ 1.678493] systemd[146]: /usr/lib/systemd/system-generators/systemd-fstab-generator succeeded.
    [ 1.678499] systemd[146]: /usr/lib/systemd/system-generators/systemd-system-update-generator succeeded.
    [ 1.689210] systemd[146]: /usr/lib/systemd/system-generators/lvm2-activation-generator succeeded.
    [ 1.689216] systemd[146]: /usr/lib/systemd/system-generators/systemd-efi-boot-generator succeeded.
    [ 1.689220] systemd[146]: /usr/lib/systemd/system-generators/systemd-debug-generator succeeded.
    [ 1.689223] systemd[146]: /usr/lib/systemd/system-generators/systemd-cryptsetup-generator succeeded.
    [ 1.689278] systemd[1]: /usr/lib/systemd/system-generators succeeded.
    [ 1.689509] systemd[1]: Looking for unit files in (higher priority first):
    [ 1.689512] systemd[1]: /etc/systemd/system
    [ 1.689513] systemd[1]: /run/systemd/system
    [ 1.689514] systemd[1]: /run/systemd/generator
    [ 1.689516] systemd[1]: /usr/local/lib/systemd/system
    [ 1.689517] systemd[1]: /usr/lib/systemd/system
    [ 1.689518] systemd[1]: /run/systemd/generator.late
    [ 1.689520] systemd[1]: SysV init scripts and rcN.d links support disabled
    [ 1.696010] systemd[1]: Failed to load configuration for auditd.service: No such file or directory
    [ 1.699470] systemd[1]: Failed to load configuration for plymouth-start.service: No such file or directory
    [ 1.704745] systemd[1]: Failed to load configuration for syslog.service: No such file or directory
    [ 1.711661] systemd[1]: Failed to load configuration for plymouth-quit.service: No such file or directory
    [ 1.712238] systemd[1]: Failed to load configuration for plymouth-quit-wait.service: No such file or directory
    [ 1.720811] systemd[1]: Using notification socket /run/systemd/notify
    [ 1.720824] systemd[1]: Successfully created private D-Bus server.
    [ 1.720829] systemd[1]: -.mount changed dead -> mounted
    [ 1.720856] systemd[1]: Activating default unit: default.target
    [ 1.720860] systemd[1]: Trying to enqueue job graphical.target/start/isolate
    [ 1.720991] systemd[1]: Looking at job [email protected]/stop conflicted_by=yes
    [ 1.720993] systemd[1]: Looking at job [email protected]/start conflicted_by=no
    [ 1.720996] systemd[1]: Fixing conflicting jobs [email protected]/stop,[email protected]/start by deleting job [email protected]/start
    [ 1.720998] systemd[1]: Looking at job gdm.service/start conflicted_by=no
    [ 1.721000] systemd[1]: Looking at job gdm.service/stop conflicted_by=no
    [ 1.721002] systemd[1]: Fixing conflicting jobs gdm.service/start,gdm.service/stop by deleting job gdm.service/stop
    [ 1.721036] systemd[1]: Installed new job graphical.target/start as 1
    [ 1.721044] systemd[1]: Installed new job multi-user.target/start as 2
    [ 1.721048] systemd[1]: Installed new job basic.target/start as 3
    [ 1.721052] systemd[1]: Installed new job sysinit.target/start as 4
    [ 1.721056] systemd[1]: Installed new job local-fs.target/start as 5
    [ 1.721059] systemd[1]: Installed new job boot.mount/start as 6
    [ 1.721063] systemd[1]: Installed new job system.slice/start as 8
    [ 1.721067] systemd[1]: Installed new job -.slice/start as 9
    [ 1.721070] systemd[1]: Installed new job dev-sda2.device/start as 10
    [ 1.721077] systemd[1]: Installed new job [email protected]/start as 11
    [ 1.721082] systemd[1]: Installed new job system-systemd\x2dfsck.slice/start as 12
    [ 1.721085] systemd[1]: Installed new job home.mount/start as 15
    [ 1.721089] systemd[1]: Installed new job dev-mapper-Linux\x2dHome.device/start as 16
    [ 1.721093] systemd[1]: Installed new job systemd-fsck@dev-mapper-Linux\x2dHome.service/start as 17
    [ 1.721097] systemd[1]: Installed new job systemd-fsck-root.service/start as 18
    [ 1.721100] systemd[1]: Installed new job tmp.mount/start as 19
    [ 1.721104] systemd[1]: Installed new job systemd-remount-fs.service/start as 20
    [ 1.721107] systemd[1]: Installed new job local-fs-pre.target/start as 21
    [ 1.721110] systemd[1]: Installed new job boot.automount/start as 22
    [ 1.721114] systemd[1]: Installed new job swap.target/start as 23
    [ 1.721117] systemd[1]: Installed new job dev-mapper-Linux\x2dSwap.swap/start as 24
    [ 1.721121] systemd[1]: Installed new job dev-mapper-Linux\x2dSwap.device/start as 25
    [ 1.721124] systemd[1]: Installed new job systemd-timesyncd.service/start as 26
    [ 1.721127] systemd[1]: Installed new job time-sync.target/start as 27
    [ 1.721131] systemd[1]: Installed new job ldconfig.service/start as 28
    [ 1.721134] systemd[1]: Installed new job sys-kernel-debug.mount/start as 29
    [ 1.721137] systemd[1]: Installed new job systemd-vconsole-setup.service/start as 30
    [ 1.721140] systemd[1]: Installed new job sys-kernel-config.mount/start as 31
    [ 1.721144] systemd[1]: Installed new job systemd-journal-flush.service/start as 32
    [ 1.721147] systemd[1]: Installed new job systemd-journald.service/start as 33
    [ 1.721150] systemd[1]: Installed new job systemd-journald.socket/start as 34
    [ 1.721154] systemd[1]: Installed new job systemd-journald-dev-log.socket/start as 35
    [ 1.721157] systemd[1]: Installed new job systemd-sysctl.service/start as 36
    [ 1.721160] systemd[1]: Installed new job systemd-firstboot.service/start as 37
    [ 1.721164] systemd[1]: Installed new job cryptsetup.target/start as 38
    [ 1.721167] systemd[1]: Installed new job lvm2-lvmetad.socket/start as 39
    [ 1.721170] systemd[1]: Installed new job kmod-static-nodes.service/start as 40
    [ 1.721173] systemd[1]: Installed new job systemd-binfmt.service/start as 41
    [ 1.721177] systemd[1]: Installed new job sys-fs-fuse-connections.mount/start as 42
    [ 1.721180] systemd[1]: Installed new job systemd-journal-catalog-update.service/start as 43
    [ 1.721184] systemd[1]: Installed new job systemd-udevd.service/start as 44
    [ 1.721187] systemd[1]: Installed new job systemd-udevd-control.socket/start as 45
    [ 1.721191] systemd[1]: Installed new job systemd-udevd-kernel.socket/start as 46
    [ 1.721194] systemd[1]: Installed new job systemd-ask-password-console.path/start as 47
    [ 1.721197] systemd[1]: Installed new job systemd-random-seed.service/start as 48
    [ 1.721200] systemd[1]: Installed new job dev-mqueue.mount/start as 49
    [ 1.721204] systemd[1]: Installed new job systemd-modules-load.service/start as 50
    [ 1.721207] systemd[1]: Installed new job proc-sys-fs-binfmt_misc.automount/start as 51
    [ 1.721211] systemd[1]: Installed new job systemd-tmpfiles-setup-dev.service/start as 52
    [ 1.721214] systemd[1]: Installed new job systemd-udev-trigger.service/start as 53
    [ 1.721217] systemd[1]: Installed new job systemd-tmpfiles-setup.service/start as 54
    [ 1.721220] systemd[1]: Installed new job systemd-update-utmp.service/start as 55
    [ 1.721224] systemd[1]: Installed new job dev-hugepages.mount/start as 56
    [ 1.721227] systemd[1]: Installed new job systemd-sysusers.service/start as 57
    [ 1.721230] systemd[1]: Installed new job systemd-udev-hwdb-update.service/start as 58
    [ 1.721233] systemd[1]: Installed new job systemd-update-done.service/start as 59
    [ 1.721237] systemd[1]: Installed new job sockets.target/start as 62
    [ 1.721240] systemd[1]: Installed new job acpid.socket/start as 63
    [ 1.721244] systemd[1]: Installed new job systemd-shutdownd.socket/start as 64
    [ 1.721247] systemd[1]: Installed new job dm-event.socket/start as 65
    [ 1.721250] systemd[1]: Installed new job systemd-initctl.socket/start as 66
    [ 1.721254] systemd[1]: Installed new job dbus.socket/start as 67
    [ 1.721257] systemd[1]: Installed new job timers.target/start as 68
    [ 1.721260] systemd[1]: Installed new job systemd-tmpfiles-clean.timer/start as 69
    [ 1.721263] systemd[1]: Installed new job paths.target/start as 70
    [ 1.721267] systemd[1]: Installed new job slices.target/start as 71
    [ 1.721270] systemd[1]: Installed new job acpid.service/start as 72
    [ 1.721272] systemd[1]: Installed new job systemd-udev-settle.service/start as 73
    [ 1.721276] systemd[1]: Installed new job remote-fs.target/start as 74
    [ 1.721279] systemd[1]: Installed new job NetworkManager.service/start as 75
    [ 1.721282] systemd[1]: Installed new job network.target/start as 76
    [ 1.721286] systemd[1]: Installed new job man-db.timer/start as 77
    [ 1.721289] systemd[1]: Installed new job dbus.service/start as 78
    [ 1.721292] systemd[1]: Installed new job getty.target/start as 79
    [ 1.721295] systemd[1]: Installed new job system-getty.slice/start as 81
    [ 1.721299] systemd[1]: Installed new job gdm.service

    So it times out (taking 3 minutes) then says
    [FAILED] Failed to start udev Wait for Complete Device Initialization.
    See "systemctl status systemd-udev-settle.service" for details
    [DEPEND] Dependency failed for ACPI event daemon
    so I ran
    systemctl status systemd-udev-settle
    with this output:
    ● systemd-udev-settle.service - udev Wait for Complete Device Initialization
    Loaded: loaded (/usr/lib/systemd/system/systemd-udev-settle.service; static)
    Active: active (exited) since Thu 2014-11-13 11:40:16 EST; 1min 24s ago
    Docs: man:udev(7)
    man:systemd-udevd.service(8)
    Process: 583 ExecStart=/usr/bin/udevadm settle (code=exited, status=0/SUCCESS)
    Main PID: 583 (code=exited, status=0/SUCCESS)
    CGroup: /system.slice/systemd-udev-settle.service
    Nov 13 11:40:14 arch-yogi systemd[1]: systemd-udev-settle.service changed failed -> start
    Nov 13 11:40:16 arch-yogi systemd[1]: Child 583 belongs to systemd-udev-settle.service
    Nov 13 11:40:16 arch-yogi systemd[1]: systemd-udev-settle.service: main process exited, code=exited, status=0/SUCCESS
    Nov 13 11:40:16 arch-yogi systemd[1]: systemd-udev-settle.service changed start -> exited
    Nov 13 11:40:16 arch-yogi systemd[1]: Job systemd-udev-settle.service/start finished, result=done
    Nov 13 11:40:16 arch-yogi systemd[1]: Started udev Wait for Complete Device Initialization.
    Nov 13 11:40:16 arch-yogi systemd[1]: systemd-udev-settle.service: cgroup is empty
    and after another
    systemd-analyze blame
    I get:
    2.358s systemd-udev-settle.service
    995ms lvm2-pvscan@8:8.service
    558ms rtkit-daemon.service
    488ms NetworkManager.service
    458ms udisks2.service
    341ms systemd-udev-trigger.service
    341ms systemd-binfmt.service
    319ms systemd-tmpfiles-setup-dev.service
    315ms systemd-random-seed.service
    301ms systemd-journald.service
    299ms proc-sys-fs-binfmt_misc.mount
    166ms systemd-udevd.service
    133ms [email protected]
    108ms systemd-journal-flush.service
    98ms systemd-logind.service
    90ms systemd-timesyncd.service
    80ms bluetooth.service
    65ms [email protected]
    47ms polkit.service
    37ms accounts-daemon.service
    28ms wpa_supplicant.service
    26ms systemd-sysctl.service
    25ms colord.service
    23ms systemd-fsck@dev-mapper-Linux\x2dHome.service
    23ms [email protected]
    22ms [email protected]
    21ms [email protected]
    19ms boot.mount
    18ms upower.service
    17ms avahi-daemon.service
    14ms systemd-remount-fs.service
    13ms gdm.service
    11ms tmp.mount
    11ms systemd-vconsole-setup.service
    10ms sys-kernel-debug.mount
    9ms dev-mapper-Linux\x2dSwap.swap
    8ms kmod-static-nodes.service
    6ms systemd-tmpfiles-setup.service
    5ms systemd-user-sessions.service
    5ms dev-mqueue.mount
    4ms systemd-update-utmp.service
    3ms home.mount
    3ms sys-kernel-config.mount
    3ms sys-fs-fuse-connections.mount
    3ms systemd-backlight@backlight:intel_backlight.service
    2ms dev-hugepages.mount
    systemd-analyze gets it right though:
    Startup finished in 2.538s (firmware) + 62ms (loader) + 2.238s (kernel) + 3min 3.161s (userspace) = 3min 8.001s
    What can I do?

  • [Systemd] Very long boot time

    I have a very long boot time with my Arch.
    Startup finished in 828766ms (kernel) + 63430ms (userspace) = 892196ms
    Especially after login into gnome, it takes quite a while until the desktop is visible. In meanwhile, I only see the wallpaper.  Does anyone has a suggestion how to fix that?
    Linux hostname 3.6.6-1-ARCH #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012 x86_64 GNU/Linux
    systemd-analzye blame shows
    18722ms colord.service
    16584ms home.mount
    12666ms plymouth-start.service
    11550ms boot.mount
    11350ms var.mount
    7604ms NetworkManager.service
    7261ms chrony.service
    1985ms wpa_supplicant.service
    1606ms systemd-modules-load.service
    1350ms systemd-tmpfiles-setup.service
    1202ms dev-hugepages.mount
    1189ms dev-mqueue.mount
    1080ms sys-kernel-debug.mount
    987ms systemd-udev-trigger.service
    946ms systemd-udevd.service
    879ms systemd-vconsole-setup.service
    495ms bluetooth.service
    376ms polkit.service
    358ms crashplan.service
    348ms systemd-readahead-replay.service
    346ms lm_sensors.service
    337ms upower.service
    331ms systemd-readahead-collect.service
    311ms systemd-logind.service
    289ms lvmetad.service
    286ms systemd-binfmt.service
    242ms cpupower.service
    206ms systemd-remount-fs.service
    174ms gdm.service
    140ms proc-sys-fs-binfmt_misc.mount
    94ms udisks2.service
    93ms rtkit-daemon.service
    87ms rc-local.service
    86ms systemd-user-sessions.service
    53ms systemd-sysctl.service
    24ms accounts-daemon.service
    2ms tmp.mount
    1ms sys-fs-fuse-connections.mount
    Dmesg shows:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.6.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/cryptpool-cryptroot ro quiet splash cryptdevice=/dev/sda2:cryptvol init=/usr/lib/systemd/systemd radeon.modeset=1 pcie_aspm=force
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c727bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c727c000-0x00000000c7281fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c7282000-0x00000000c73ebfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c73ec000-0x00000000c740efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c740f000-0x00000000c746efff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c746f000-0x00000000c746ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c7470000-0x00000000c74f0fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000c74f1000-0x00000000c770efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c770f000-0x00000000c7717fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c7718000-0x00000000c771efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c771f000-0x00000000c7770fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c7771000-0x00000000c779efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000c779f000-0x00000000c77e1fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c77e2000-0x00000000c77fefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000c77ff000-0x00000000c77fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c7800000-0x00000000c7ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f1004000-0x00000000f1004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000237ffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: Dell Inc. Studio XPS 1645/0Y517R, BIOS A13 04/01/2011
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-D3FFF write-through
    [ 0.000000] D4000-D7FFF uncachable
    [ 0.000000] D8000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0C0000000 mask FF8000000 write-back
    [ 0.000000] 4 base 100000000 mask F00000000 write-back
    [ 0.000000] 5 base 200000000 mask FE0000000 write-back
    [ 0.000000] 6 base 220000000 mask FF0000000 write-back
    [ 0.000000] 7 base 230000000 mask FF8000000 write-back
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xc7800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f7360-0x000f736f] mapped at [ffff8800000f7360]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xc77fffff]
    [ 0.000000] [mem 0x00000000-0xc77fffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0xc77fffff @ [mem 0x1fffb000-0x1fffffff]
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x237ffffff]
    [ 0.000000] [mem 0x100000000-0x237ffffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x237ffffff @ [mem 0xc77dc000-0xc77e1fff]
    [ 0.000000] RAMDISK: [mem 0x376e0000-0x37b67fff]
    [ 0.000000] ACPI: RSDP 00000000000f7280 00024 (v02 PTLTD )
    [ 0.000000] ACPI: XSDT 00000000c77f4285 00064 (v01 DELL QA09 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 00000000c77e4000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
    [ 0.000000] ACPI: DSDT 00000000c77e5000 0A839 (v02 Intel CALPELLA 06040000 INTL 20060912)
    [ 0.000000] ACPI: FACS 00000000c779bfc0 00040
    [ 0.000000] ACPI: HPET 00000000c77fecc2 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: MCFG 00000000c77fecfa 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: APIC 00000000c77fed36 000BC (v01 PTLTD ? APIC 06040000 LTP 00000000)
    [ 0.000000] ACPI: BOOT 00000000c77fedf2 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    [ 0.000000] ACPI: SLIC 00000000c77fee1a 00176 (v01 DELL QA09 06040000 LTP 00000000)
    [ 0.000000] ACPI: OSFR 00000000c77fef90 00070 (v01 DELL DELL 06040000 ASL 00000061)
    [ 0.000000] ACPI: SSDT 00000000c77e3000 009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x237ffffff]
    [ 0.000000] NODE_DATA [mem 0x237ffc000-0x237ffffff]
    [ 0.000000] [ffffea0000000000-ffffea0008dfffff] PMD -> [ffff88022f600000-ffff8802375fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x237ffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009bfff]
    [ 0.000000] node 0: [mem 0x00100000-0xc727bfff]
    [ 0.000000] node 0: [mem 0xc7282000-0xc73ebfff]
    [ 0.000000] node 0: [mem 0xc740f000-0xc746efff]
    [ 0.000000] node 0: [mem 0xc770f000-0xc7717fff]
    [ 0.000000] node 0: [mem 0xc771f000-0xc7770fff]
    [ 0.000000] node 0: [mem 0xc779f000-0xc77e1fff]
    [ 0.000000] node 0: [mem 0xc77ff000-0xc77fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x237ffffff]
    [ 0.000000] On node 0 totalpages: 2094193
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3910 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 795941 pages, LIFO batch:31
    [ 0.000000] Normal zone: 19968 pages used for memmap
    [ 0.000000] Normal zone: 1257984 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000c727c000 - 00000000c7282000
    [ 0.000000] PM: Registered nosave memory: 00000000c73ec000 - 00000000c740f000
    [ 0.000000] PM: Registered nosave memory: 00000000c746f000 - 00000000c7470000
    [ 0.000000] PM: Registered nosave memory: 00000000c7470000 - 00000000c74f1000
    [ 0.000000] PM: Registered nosave memory: 00000000c74f1000 - 00000000c770f000
    [ 0.000000] PM: Registered nosave memory: 00000000c7718000 - 00000000c771f000
    [ 0.000000] PM: Registered nosave memory: 00000000c7771000 - 00000000c779f000
    [ 0.000000] PM: Registered nosave memory: 00000000c77e2000 - 00000000c77ff000
    [ 0.000000] PM: Registered nosave memory: 00000000c7800000 - 00000000c8000000
    [ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f1004000
    [ 0.000000] PM: Registered nosave memory: 00000000f1004000 - 00000000f1005000
    [ 0.000000] PM: Registered nosave memory: 00000000f1005000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
    [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] e820: [mem 0xc8000000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880237c00000 s84608 r8192 d21888 u262144
    [ 0.000000] pcpu-alloc: s84608 r8192 d21888 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2057835
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/cryptpool-cryptroot ro quiet splash cryptdevice=/dev/sda2:cryptvol init=/usr/lib/systemd/systemd radeon.modeset=1 pcie_aspm=force
    [ 0.000000] PCIe ASPM is forcibly enabled
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8162844k/9306112k available (4727k kernel code, 929340k absent, 213928k reserved, 4143k data, 768k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 1596.068 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.14 BogoMIPS (lpj=5320226)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000044] Security Framework initialized
    [ 0.000048] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000771] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.003000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003923] Mount-cache hash table entries: 256
    [ 0.004173] Initializing cgroup subsys cpuacct
    [ 0.004176] Initializing cgroup subsys memory
    [ 0.004184] Initializing cgroup subsys devices
    [ 0.004186] Initializing cgroup subsys freezer
    [ 0.004188] Initializing cgroup subsys net_cls
    [ 0.004189] Initializing cgroup subsys blkio
    [ 0.004216] CPU: Physical Processor ID: 0
    [ 0.004217] CPU: Processor Core ID: 0
    [ 0.004222] mce: CPU supports 9 MCE banks
    [ 0.004234] CPU0: Thermal monitoring enabled (TM1)
    [ 0.004241] process: using mwait in idle threads
    [ 0.004246] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift is 0x6
    [ 0.005569] ACPI: Core revision 20120711
    [ 0.021739] ftrace: allocating 18347 entries in 72 pages
    [ 0.034527] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.067503] smpboot: CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
    [ 0.172651] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
    [ 0.172658] perf_event_intel: CPU erratum AAJ80 worked around
    [ 0.172659] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
    [ 0.172661] ... version: 3
    [ 0.172662] ... bit width: 48
    [ 0.172663] ... generic registers: 4
    [ 0.172665] ... value mask: 0000ffffffffffff
    [ 0.172666] ... max period: 000000007fffffff
    [ 0.172667] ... fixed-purpose events: 3
    [ 0.172669] ... event mask: 000000070000000f
    [ 0.199435] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.212646] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
    [ 0.379170] Brought up 8 CPUs
    [ 0.379175] smpboot: Total of 8 processors activated (25547.13 BogoMIPS)
    [ 0.385494] devtmpfs: initialized
    [ 0.387562] PM: Registering ACPI NVS region [mem 0xc7470000-0xc74f0fff] (528384 bytes)
    [ 0.387574] PM: Registering ACPI NVS region [mem 0xc7771000-0xc779efff] (188416 bytes)
    [ 0.388860] NET: Registered protocol family 16
    [ 0.389041] ACPI: bus type pci registered
    [ 0.389136] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.389139] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.432597] PCI: Using configuration type 1 for base access
    [ 0.433425] bio: create slab <bio-0> at 0
    [ 0.433488] ACPI: Added _OSI(Module Device)
    [ 0.433490] ACPI: Added _OSI(Processor Device)
    [ 0.433491] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.433493] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.435530] ACPI: EC: Look up EC in DSDT
    [ 0.437476] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.442713] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.443644] ACPI: SSDT 00000000c771aa98 002E8 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
    [ 0.444142] ACPI: Dynamic OEM Table Load:
    [ 0.444145] ACPI: SSDT (null) 002E8 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
    [ 0.444332] ACPI: SSDT 00000000c7719018 008B0 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
    [ 0.444806] ACPI: Dynamic OEM Table Load:
    [ 0.444809] ACPI: SSDT (null) 008B0 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
    [ 0.445201] ACPI: SSDT 00000000c771a718 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
    [ 0.445749] ACPI: Dynamic OEM Table Load:
    [ 0.445753] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
    [ 0.445922] ACPI: SSDT 00000000c7718d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
    [ 0.446432] ACPI: Dynamic OEM Table Load:
    [ 0.446435] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
    [ 0.448062] ACPI: Interpreter enabled
    [ 0.448066] ACPI: (supports S0 S3 S4 S5)
    [ 0.448089] ACPI: Using IOAPIC for interrupt routing
    [ 0.448593] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.455392] ACPI: Power Resource [FN00] (off)
    [ 0.455494] ACPI: Power Resource [FN01] (off)
    [ 0.456110] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 0.456339] ACPI: No dock devices found.
    [ 0.456343] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.456813] \_SB_.PCI0:_OSC invalid UUID
    [ 0.456815] _OSC request data:1 8 1f
    [ 0.456820] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 0.457600] PCI host bridge to bus 0000:00
    [ 0.457604] pci_bus 0000:00: busn_res: [bus 00-fe] is inserted under domain [bus 00-ff]
    [ 0.457607] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 0.457610] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.457612] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.457615] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.457617] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.457619] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.457622] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.457624] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xdfffffff]
    [ 0.457627] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
    [ 0.457638] pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
    [ 0.457700] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
    [ 0.457759] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    [ 0.457783] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
    [ 0.457850] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
    [ 0.457917] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
    [ 0.457983] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
    [ 0.458043] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
    [ 0.458094] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
    [ 0.458170] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    [ 0.458194] pci 0000:00:1a.0: reg 10: [mem 0xf1005800-0xf1005bff]
    [ 0.458289] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.458318] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    [ 0.458335] pci 0000:00:1b.0: reg 10: [mem 0xf1000000-0xf1003fff 64bit]
    [ 0.458409] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.458432] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
    [ 0.458508] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.458533] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
    [ 0.458609] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.458635] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
    [ 0.458710] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.458735] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
    [ 0.458810] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.458835] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
    [ 0.458911] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.458943] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    [ 0.458965] pci 0000:00:1d.0: reg 10: [mem 0xf1005c00-0xf1005fff]
    [ 0.459066] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.459092] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.459161] pci 0000:00:1f.0: [8086:3b03] type 00 class 0x060100
    [ 0.459292] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
    [ 0.459313] pci 0000:00:1f.2: reg 10: [io 0x1830-0x1837]
    [ 0.459322] pci 0000:00:1f.2: reg 14: [io 0x1824-0x1827]
    [ 0.459331] pci 0000:00:1f.2: reg 18: [io 0x1828-0x182f]
    [ 0.459340] pci 0000:00:1f.2: reg 1c: [io 0x1820-0x1823]
    [ 0.459350] pci 0000:00:1f.2: reg 20: [io 0x1800-0x181f]
    [ 0.459359] pci 0000:00:1f.2: reg 24: [mem 0xf1005000-0xf10057ff]
    [ 0.459410] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.459430] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    [ 0.459446] pci 0000:00:1f.3: reg 10: [mem 0xf1006000-0xf10060ff 64bit]
    [ 0.459469] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f]
    [ 0.459533] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-fe]
    [ 0.459547] pci 0000:02:00.0: [1002:9488] type 00 class 0x030000
    [ 0.459559] pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
    [ 0.459568] pci 0000:02:00.0: reg 14: [io 0x2000-0x20ff]
    [ 0.459577] pci 0000:02:00.0: reg 18: [mem 0xcfef0000-0xcfefffff]
    [ 0.459605] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.459642] pci 0000:02:00.0: supports D1 D2
    [ 0.459664] pci 0000:02:00.1: [1002:aa38] type 00 class 0x040300
    [ 0.459676] pci 0000:02:00.1: reg 10: [mem 0xcfeec000-0xcfeeffff]
    [ 0.459749] pci 0000:02:00.1: supports D1 D2
    [ 0.469037] pci 0000:00:03.0: PCI bridge to [bus 02]
    [ 0.469045] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
    [ 0.469052] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xcfefffff]
    [ 0.469061] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.469117] pci_bus 0000:03: busn_res: [bus 03-04] is inserted under [bus 00-fe]
    [ 0.469121] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
    [ 0.469126] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.469130] pci 0000:00:1c.0: bridge window [mem 0xf0800000-0xf08fffff]
    [ 0.469137] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.469179] pci_bus 0000:05: busn_res: [bus 05-06] is inserted under [bus 00-fe]
    [ 0.469247] pci 0000:05:00.0: [8086:4235] type 00 class 0x028000
    [ 0.469385] pci 0000:05:00.0: reg 10: [mem 0xf0900000-0xf0901fff 64bit]
    [ 0.470080] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
    [ 0.470313] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
    [ 0.470317] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    [ 0.470322] pci 0000:00:1c.1: bridge window [mem 0xf0900000-0xf09fffff]
    [ 0.470329] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
    [ 0.470371] pci_bus 0000:07: busn_res: [bus 07-08] is inserted under [bus 00-fe]
    [ 0.470375] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
    [ 0.470380] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    [ 0.470384] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf0afffff]
    [ 0.470391] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
    [ 0.470433] pci_bus 0000:09: busn_res: [bus 09-0a] is inserted under [bus 00-fe]
    [ 0.470458] pci 0000:09:00.0: [1180:e822] type 00 class 0x080500
    [ 0.470478] pci 0000:09:00.0: reg 10: [mem 0xf0b00000-0xf0b000ff]
    [ 0.470612] pci 0000:09:00.0: supports D1 D2
    [ 0.470614] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.470664] pci 0000:09:00.1: [1180:e230] type 00 class 0x088000
    [ 0.470683] pci 0000:09:00.1: reg 10: [mem 0xf0c00800-0xf0c008ff]
    [ 0.470817] pci 0000:09:00.1: supports D1 D2
    [ 0.470819] pci 0000:09:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.470862] pci 0000:09:00.2: [1180:e852] type 00 class 0x088000
    [ 0.470882] pci 0000:09:00.2: reg 10: [mem 0xf0c00c00-0xf0c00cff]
    [ 0.471016] pci 0000:09:00.2: supports D1 D2
    [ 0.471018] pci 0000:09:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.471061] pci 0000:09:00.3: [1180:e832] type 00 class 0x0c0010
    [ 0.471080] pci 0000:09:00.3: reg 10: [mem 0xf0c00000-0xf0c007ff]
    [ 0.471214] pci 0000:09:00.3: supports D1 D2
    [ 0.471216] pci 0000:09:00.3: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.479052] pci 0000:00:1c.4: PCI bridge to [bus 09-0a]
    [ 0.479060] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
    [ 0.479067] pci 0000:00:1c.4: bridge window [mem 0xf0b00000-0xf0cfffff]
    [ 0.479077] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
    [ 0.479131] pci_bus 0000:0b: busn_res: [bus 0b] is inserted under [bus 00-fe]
    [ 0.479319] pci 0000:0b:00.0: [14e4:1698] type 00 class 0x020000
    [ 0.479351] pci 0000:0b:00.0: reg 10: [mem 0xf0d00000-0xf0d0ffff 64bit]
    [ 0.479523] pci 0000:0b:00.0: PME# supported from D3hot D3cold
    [ 0.479582] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 0.479589] pci 0000:00:1c.5: bridge window [mem 0xf0d00000-0xf0dfffff]
    [ 0.479616] pci_bus 0000:0c: busn_res: [bus 0c] is inserted under [bus 00-fe]
    [ 0.479664] pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
    [ 0.479675] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.479677] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.479680] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.479682] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.479685] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.479687] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [ 0.479690] pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xdfffffff] (subtractive decode)
    [ 0.479692] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
    [ 0.479724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.479928] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    [ 0.479968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.480099] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.480160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.480223] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [ 0.480283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [ 0.480343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 0.480435] \_SB_.PCI0:_OSC invalid UUID
    [ 0.480437] _OSC request data:1 1f 1f
    [ 0.480441] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.480443] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.487467] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
    [ 0.487507] PCI host bridge to bus 0000:ff
    [ 0.487511] pci_bus 0000:ff: busn_res: [bus ff] is inserted under domain [bus 00-ff]
    [ 0.487513] pci_bus 0000:ff: root bus resource [bus ff]
    [ 0.487521] pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000
    [ 0.487545] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
    [ 0.487572] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
    [ 0.487594] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
    [ 0.487622] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
    [ 0.487644] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
    [ 0.487667] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
    [ 0.487691] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
    [ 0.487714] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
    [ 0.487736] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
    [ 0.487758] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
    [ 0.487783] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
    [ 0.487807] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
    [ 0.487829] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
    [ 0.487852] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
    [ 0.487895] pci0000:ff: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.487897] pci0000:ff: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.488488] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    [ 0.488544] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.488601] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.488655] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.488711] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 0.488765] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.488819] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    [ 0.488871] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 0.488974] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.488983] vgaarb: loaded
    [ 0.488985] vgaarb: bridge control possible 0000:02:00.0
    [ 0.489035] PCI: Using ACPI for IRQ routing
    [ 0.495825] PCI: pci_cache_line_size set to 64 bytes
    [ 0.496142] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
    [ 0.496144] e820: reserve RAM buffer [mem 0xc727c000-0xc7ffffff]
    [ 0.496149] e820: reserve RAM buffer [mem 0xc73ec000-0xc7ffffff]
    [ 0.496152] e820: reserve RAM buffer [mem 0xc746f000-0xc7ffffff]
    [ 0.496156] e820: reserve RAM buffer [mem 0xc7718000-0xc7ffffff]
    [ 0.496159] e820: reserve RAM buffer [mem 0xc7771000-0xc7ffffff]
    [ 0.496161] e820: reserve RAM buffer [mem 0xc77e2000-0xc7ffffff]
    [ 0.496163] e820: reserve RAM buffer [mem 0xc7800000-0xc7ffffff]
    [ 0.496267] NetLabel: Initializing
    [ 0.496269] NetLabel: domain hash size = 128
    [ 0.496270] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.496283] NetLabel: unlabeled traffic allowed by default
    [ 0.496337] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
    [ 0.496344] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
    [ 0.496351] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.499146] hpet: hpet2 irq 40 for MSI
    [ 0.502434] hpet: hpet3 irq 41 for MSI
    [ 0.505694] hpet: hpet4 irq 42 for MSI
    [ 0.505793] hpet: hpet5 irq 43 for MSI
    [ 0.509214] hpet: hpet6 irq 44 for MSI
    [ 0.522618] Switching to clocksource hpet
    [ 0.529334] pnp: PnP ACPI init
    [ 0.529354] ACPI: bus type pnp registered
    [ 0.529782] pnp 00:00: [bus 00-fe]
    [ 0.529786] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.529789] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.529791] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.529794] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.529796] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.529799] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.529801] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.529803] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.529806] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.529808] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.529811] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.529813] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.529815] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.529820] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.529822] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.529825] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.529827] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.529829] pnp 00:00: [mem 0xc8000000-0xdfffffff window]
    [ 0.529832] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
    [ 0.529834] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.529903] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.529952] pnp 00:01: [io 0x0000-0x001f]
    [ 0.529954] pnp 00:01: [io 0x0081-0x0091]
    [ 0.529957] pnp 00:01: [io 0x0093-0x009f]
    [ 0.529959] pnp 00:01: [io 0x00c0-0x00df]
    [ 0.529961] pnp 00:01: [dma 4]
    [ 0.529991] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.530001] pnp 00:02: [mem 0xff000000-0xffffffff]
    [ 0.530030] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.530116] pnp 00:03: [irq 0 disabled]
    [ 0.530125] pnp 00:03: [irq 8]
    [ 0.530128] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.530162] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.530174] pnp 00:04: [io 0x00f0]
    [ 0.530181] pnp 00:04: [irq 13]
    [ 0.530207] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.530221] pnp 00:05: [io 0x002e-0x002f]
    [ 0.530223] pnp 00:05: [io 0x004e-0x004f]
    [ 0.530225] pnp 00:05: [io 0x0061]
    [ 0.530227] pnp 00:05: [io 0x0063]
    [ 0.530229] pnp 00:05: [io 0x0065]
    [ 0.530231] pnp 00:05: [io 0x0067]
    [ 0.530234] pnp 00:05: [io 0x0068]
    [ 0.530236] pnp 00:05: [io 0x006c]
    [ 0.530238] pnp 00:05: [io 0x0070]
    [ 0.530240] pnp 00:05: [io 0x0080]
    [ 0.530242] pnp 00:05: [io 0x0092]
    [ 0.530244] pnp 00:05: [io 0x00b2-0x00b3]
    [ 0.530246] pnp 00:05: [io 0x0680-0x069f]
    [ 0.530249] pnp 00:05: [io 0x0500-0x050f]
    [ 0.530251] pnp 00:05: [io 0xffff]
    [ 0.530253] pnp 00:05: [io 0xffff]
    [ 0.530255] pnp 00:05: [io 0x0400-0x047f]
    [ 0.530257] pnp 00:05: [io 0x1180-0x11ff]
    [ 0.530259] pnp 00:05: [io 0x164e-0x164f]
    [ 0.530262] pnp 00:05: [io 0xfe00]
    [ 0.530330] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 0.530333] system 00:05: [io 0x0500-0x050f] has been reserved
    [ 0.530336] system 00:05: [io 0xffff] has been reserved
    [ 0.530339] system 00:05: [io 0xffff] has been reserved
    [ 0.530342] system 00:05: [io 0x0400-0x047f] has been reserved
    [ 0.530345] system 00:05: [io 0x1180-0x11ff] has been reserved
    [ 0.530347] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 0.530352] system 00:05: [io 0xfe00] has been reserved
    [ 0.530356] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.530374] pnp 00:06: [io 0x0300-0x0307]
    [ 0.530381] pnp 00:06: [irq 10]
    [ 0.530410] pnp 00:06: Plug and Play ACPI device, IDs ITE8708 (active)
    [ 0.530445] pnp 00:07: [io 0x0070-0x0077]
    [ 0.530476] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.530488] pnp 00:08: [io 0x0060]
    [ 0.530492] pnp 00:08: [io 0x0064]
    [ 0.530499] pnp 00:08: [irq 1]
    [ 0.530526] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.530539] pnp 00:09: [irq 12]
    [ 0.530569] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
    [ 0.530934] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
    [ 0.530937] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.530940] pnp 00:0a: [mem 0xfed1b000-0xfed1bfff]
    [ 0.530942] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.530944] pnp 00:0a: [mem 0xe0000000-0xefffffff]
    [ 0.530947] pnp 00:0a: [mem 0xf1004000-0xf1004fff]
    [ 0.530949] pnp 00:0a: [mem 0xc8000000-0xc8000fff]
    [ 0.530951] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
    [ 0.530954] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
    [ 0.530956] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
    [ 0.530958] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
    [ 0.530960] pnp 00:0a: [mem 0xff000000-0xffffffff]
    [ 0.530963] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
    [ 0.531049] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.531052] system 00:0a: [mem 0xfed1b000-0xfed1bfff] has been reserved
    [ 0.531055] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.531058] system 00:0a: [mem 0xf1004000-0xf1004fff] has been reserved
    [ 0.531061] system 00:0a: [mem 0xc8000000-0xc8000fff] has been reserved
    [ 0.531064] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.531067] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.531070] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.531072] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.531075] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.531080] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.532133] pnp 00:0b: [bus ff]
    [ 0.532197] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.532211] pnp: PnP ACPI: found 12 devices
    [ 0.532212] ACPI: ACPI bus type pnp unregistered
    [ 0.539150] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
    [ 0.539155] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
    [ 0.539169] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.539172] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.539178] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc8100000-0xc82fffff 64bit pref]
    [ 0.539182] pci 0000:00:1c.5: BAR 13: assigned [io 0x7000-0x7fff]
    [ 0.539186] pci 0000:02:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
    [ 0.539190] pci 0000:00:03.0: PCI bridge to [bus 02]
    [ 0.539193] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
    [ 0.539198] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xcfefffff]
    [ 0.539202] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.539207] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
    [ 0.539211] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.539217] pci 0000:00:1c.0: bridge window [mem 0xf0800000-0xf08fffff]
    [ 0.539221] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.539228] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
    [ 0.539232] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    [ 0.539237] pci 0000:00:1c.1: bridge window [mem 0xf0900000-0xf09fffff]
    [ 0.539241] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
    [ 0.539248] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
    [ 0.539252] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    [ 0.539257] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf0afffff]
    [ 0.539262] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
    [ 0.539269] pci 0000:00:1c.4: PCI bridge to [bus 09-0a]
    [ 0.539273] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
    [ 0.539278] pci 0000:00:1c.4: bridge window [mem 0xf0b00000-0xf0cfffff]
    [ 0.539283] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
    [ 0.539290] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 0.539293] pci 0000:00:1c.5: bridge window [io 0x7000-0x7fff]
    [ 0.539299] pci 0000:00:1c.5: bridge window [mem 0xf0d00000-0xf0dfffff]
    [ 0.539304] pci 0000:00:1c.5: bridge window [mem 0xc8100000-0xc82fffff 64bit pref]
    [ 0.539310] pci 0000:00:1e.0: PCI bridge to [bus 0c]
    [ 0.539366] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.539371] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.539373] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.539376] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.539378] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.539381] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.539383] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
    [ 0.539385] pci_bus 0000:00: resource 10 [mem 0xc8000000-0xdfffffff]
    [ 0.539398] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
    [ 0.539401] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.539403] pci_bus 0000:02: resource 1 [mem 0xcfe00000-0xcfefffff]
    [ 0.539406] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.539408] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
    [ 0.539411] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf08fffff]
    [ 0.539413] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.539416] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
    [ 0.539418] pci_bus 0000:05: resource 1 [mem 0xf0900000-0xf09fffff]
    [ 0.539420] pci_bus 0000:05: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
    [ 0.539423] pci_bus 0000:07: resource 0 [io 0x5000-0x5fff]
    [ 0.539425] pci_bus 0000:07: resource 1 [mem 0xf0a00000-0xf0afffff]
    [ 0.539428] pci_bus 0000:07: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
    [ 0.539430] pci_bus 0000:09: resource 0 [io 0x6000-0x6fff]
    [ 0.539433] pci_bus 0000:09: resource 1 [mem 0xf0b00000-0xf0cfffff]
    [ 0.539435] pci_bus 0000:09: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
    [ 0.539438] pci_bus 0000:0b: resource 0 [io 0x7000-0x7fff]
    [ 0.539440] pci_bus 0000:0b: resource 1 [mem 0xf0d00000-0xf0dfffff]
    [ 0.539443] pci_bus 0000:0b: resource 2 [mem 0xc8100000-0xc82fffff 64bit pref]
    [ 0.539445] pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7]
    [ 0.539448] pci_bus 0000:0c: resource 5 [io 0x0d00-0xffff]
    [ 0.539450] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.539452] pci_bus 0000:0c: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.539455] pci_bus 0000:0c: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.539457] pci_bus 0000:0c: resource 9 [mem 0x000dc000-0x000dffff]
    [ 0.539460] pci_bus 0000:0c: resource 10 [mem 0xc8000000-0xdfffffff]
    [ 0.539462] pci_bus 0000:0c: resource 11 [mem 0xf0000000-0xfebfffff]
    [ 0.539501] NET: Registered protocol family 2
    [ 0.540223] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.543745] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.544173] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.544194] TCP: reno registered
    [ 0.544208] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.544300] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.544454] NET: Registered protocol family 1
    [ 0.544593] pci 0000:02:00.0: Boot video device
    [ 0.544817] PCI: CLS 64 bytes, default 64
    [ 0.544861] Unpacking initramfs...
    [ 0.665886] Freeing initrd memory: 4640k freed
    [ 0.666611] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.666615] software IO TLB [mem 0xc327c000-0xc727bfff] (64MB) mapped at [ffff8800c327c000-ffff8800c727bfff]
    [ 0.666654] Simple Boot Flag at 0x36 set to 0x80
    [ 0.667182] audit: initializing netlink socket (disabled)
    [ 0.667193] type=2000 audit(1352749565.703:1): initialized
    [ 0.683027] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.685360] VFS: Disk quotas dquot_6.5.2
    [ 0.685417] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.685575] msgmni has been set to 15952
    [ 0.685799] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.685830] io scheduler noop registered
    [ 0.685832] io scheduler deadline registered
    [ 0.685897] io scheduler cfq registered (default)
    [ 0.686337] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
    [ 0.686339] vesafb: scrolling: redraw
    [ 0.686342] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 0.687265] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011600000, using 5120k, total 5120k
    [ 0.886729] Console: switching to colour frame buffer device 160x64
    [ 1.086123] fb0: VESA VGA frame buffer device
    [ 1.086134] intel_idle: MWAIT substates: 0x1120
    [ 1.086145] intel_idle: v0.4 model 0x1E
    [ 1.086146] intel_idle: lapic_timer_reliable_states 0x2
    [ 1.086221] GHES: HEST is not enabled!
    [ 1.086283] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.086787] Linux agpgart interface v0.103
    [ 1.086895] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 1.097204] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.097237] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.097348] mousedev: PS/2 mouse device common for all mice
    [ 1.097573] rtc_cmos 00:07: RTC can wake from S4
    [ 1.097893] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    [ 1.097920] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.098264] cpuidle: using governor ladder
    [ 1.098473] cpuidle: using governor menu
    [ 1.098603] drop_monitor: Initializing network drop monitor service
    [ 1.098697] TCP: cubic registered
    [ 1.098819] NET: Registered protocol family 10
    [ 1.099011] NET: Registered protocol family 17
    [ 1.099028] Key type dns_resolver registered
    [ 1.099438] PM: Hibernation image not present or could not be loaded.
    [ 1.099447] registered taskstats version 1
    [ 1.101811] rtc_cmos 00:07: setting system clock to 2012-11-12 19:46:05 UTC (1352749565)
    [ 1.103851] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.106355] Freeing unused kernel memory: 768k freed
    [ 1.106522] Write protecting the kernel read-only data: 8192k
    [ 1.116385] Freeing unused kernel memory: 1408k freed
    [ 1.117994] Freeing unused kernel memory: 568k freed
    [ 1.134497] systemd-udevd[78]: starting version 195
    [ 1.180869] ACPI: bus type usb registered
    [ 1.180984] usbcore: registered new interface driver usbfs
    [ 1.181051] usbcore: registered new interface driver hub
    [ 1.181311] usbcore: registered new device driver usb
    [ 1.182950] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.183127] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.183132] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 1.183234] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.187253] ehci_hcd 0000:00:1a.0: debug port 2
    [ 1.187271] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.187303] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1005800
    [ 1.187791] SCSI subsystem initialized
    [ 1.189604] ACPI: bus type scsi registered
    [ 1.189681] libata version 3.00 loaded.
    [ 1.195488] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.195917] hub 1-0:1.0: USB hub found
    [ 1.195922] hub 1-0:1.0: 3 ports detected
    [ 1.196087] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.196092] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 1.196163] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.200176] ehci_hcd 0000:00:1d.0: debug port 2
    [ 1.200188] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.200205] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1005c00
    [ 1.208814] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.209225] hub 2-0:1.0: USB hub found
    [ 1.209230] hub 2-0:1.0: 3 ports detected
    [ 1.209367] ahci 0000:00:1f.2: version 3.0
    [ 1.209430] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
    [ 1.209548] ahci: SSS flag set, parallel bus scan disabled
    [ 1.209587] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl SATA mode
    [ 1.209592] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
    [ 1.209597] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.223416] scsi0 : ahci
    [ 1.223797] scsi1 : ahci
    [ 1.224147] scsi2 : ahci
    [ 1.224500] scsi3 : ahci
    [ 1.224856] scsi4 : ahci
    [ 1.225221] scsi5 : ahci
    [ 1.225356] ata1: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005100 irq 45
    [ 1.225362] ata2: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005180 irq 45
    [ 1.225365] ata3: DUMMY
    [ 1.225367] ata4: DUMMY
    [ 1.225369] ata5: DUMMY
    [ 1.225373] ata6: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005380 irq 45
    [ 1.501934] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.545247] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.547533] ata1.00: ATA-8: WDC WD6400BEVT-75A0RT0, 01.01A01, max UDMA/133
    [ 1.547540] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.549967] ata1.00: configured for UDMA/133
    [ 1.550374] scsi 0:0:0:0: Direct-Access ATA WDC WD6400BEVT-7 01.0 PQ: 0 ANSI: 5
    [ 1.626090] hub 1-1:1.0: USB hub found
    [ 1.626247] hub 1-1:1.0: 6 ports detected
    [ 1.668452] tsc: Refined TSC clocksource calibration: 1595.999 MHz
    [ 1.668460] Switching to clocksource tsc
    [ 1.731725] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.856178] hub 2-1:1.0: USB hub found
    [ 1.856346] hub 2-1:1.0: 8 ports detected
    [ 1.868319] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.880979] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-T633C, D800, max UDMA/100
    [ 1.880987] ata2.00: applying bridge limits
    [ 1.894279] ata2.00: configured for UDMA/100
    [ 1.895297] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-T633C D800 PQ: 0 ANSI: 5
    [ 1.924926] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd
    [ 2.188109] usb 2-1.1: new low-speed USB device number 3 using ehci_hcd
    [ 2.214657] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.220297] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
    [ 2.220394] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.220398] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.220436] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.264902] sda: sda1 sda2
    [ 2.266126] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.286592] usbcore: registered new interface driver usbhid
    [ 2.286606] usbhid: USB HID core driver
    [ 2.287736] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
    [ 2.288087] hid-generic 0003:046D:C00B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.0-1.1/input0
    [ 2.344526] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd
    [ 2.415244] device-mapper: uevent: version 1.0.3
    [ 2.415448] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
    [ 2.430414] hub 2-1.2:1.0: USB hub found
    [ 2.430750] hub 2-1.2:1.0: 4 ports detected
    [ 2.497819] usb 2-1.6: new full-speed USB device number 5 using ehci_hcd
    [ 2.583779] hub 2-1.6:1.0: USB hub found
    [ 2.583940] hub 2-1.6:1.0: 3 ports detected
    [ 2.697722] usb 2-1.2.1: new high-speed USB device number 6 using ehci_hcd
    [ 2.850856] usb 2-1.6.1: new full-speed USB device number 7 using ehci_hcd
    [ 2.939323] input: HID 413c:8157 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/input/input2
    [ 2.939498] hid-generic 0003:413C:8157.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1d.0-1.6.1/input0
    [ 3.004105] usb 2-1.6.2: new full-speed USB device number 8 using ehci_hcd
    [ 3.094077] input: HID 413c:8158 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/input/input3
    [ 3.094424] hid-generic 0003:413C:8158.0003: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1d.0-1.6.2/input0
    [ 824.543880] Btrfs loaded
    [ 824.582726] device fsid 02cda685-4334-4137-a111-ffc149f72b91 devid 1 transid 219619 /dev/dm-4
    [ 824.589373] device fsid f90574c8-73b1-4d21-b0f9-c8383e90f702 devid 1 transid 19638 /dev/dm-1
    [ 825.172465] device fsid f90574c8-73b1-4d21-b0f9-c8383e90f702 devid 1 transid 19638 /dev/mapper/cryptpool-cryptroot
    [ 825.228574] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
    [ 825.236250] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
    [ 825.497003] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
    [ 826.881639] systemd[1]: systemd 195 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
    [ 826.913723] systemd[1]: Set hostname to <clawfinger>.
    [ 829.535709] systemd[1]: Cannot add dependency job for unit lvm.service, ignoring: Unit lvm.service failed to load: No such file or directory. See system logs and 'systemctl status lvm.service' for details.
    [ 829.535737] systemd[1]: Cannot add dependency job for unit cpufreq.service, ignoring: Unit cpufreq.service failed to load: No such file or directory. See system logs and 'systemctl status cpufreq.service' for details.
    [ 829.535752] systemd[1]: Cannot add dependency job for unit zeitgeist-daemon.service, ignoring: Unit zeitgeist-daemon.service failed to load: No such file or directory. See system logs and 'systemctl status zeitgeist-daemon.service' for details.
    [ 829.535786] systemd[1]: Cannot add dependency job for unit laptop-mode-tools.service, ignoring: Unit laptop-mode-tools.service failed to load: No such file or directory. See system logs and 'systemctl status laptop-mode-tools.service' for details.
    [ 829.535834] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 829.535861] systemd[1]: Cannot add dependency job for unit console-kit-daemon.service, ignoring: Unit console-kit-daemon.service failed to load: No such file or directory. See system logs and 'systemctl status console-kit-daemon.service' for details.
    [ 829.536380] systemd[1]: Starting Replay Read-Ahead Data...
    [ 829.554901] systemd[1]: Starting Collect Read-Ahead Data...
    [ 829.571226] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 829.571303] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 829.571319] systemd[1]: Starting Login Prompts.
    [ 829.571328] systemd[1]: Reached target Login Prompts.
    [ 829.571337] systemd[1]: Starting Remote File Systems.
    [ 829.571345] systemd[1]: Reached target Remote File Systems.
    [ 829.571354] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
    [ 829.571362] systemd[1]: Starting Syslog Socket.
    [ 829.571364] systemd[1]: Socket service syslog.service not loaded, refusing.
    [ 829.572842] systemd[1]: Failed to listen on Syslog Socket.
    [ 829.574007] systemd[1]: Starting Arch Daemons.
    [ 829.574014] systemd[1]: Reached target Arch Daemons.
    [ 829.574023] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 829.574048] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 829.574055] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 829.574075] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 829.574081] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 829.574098] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 829.574106] systemd[1]: Starting Delayed Shutdown Socket.
    [ 829.574129] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 829.574218] systemd[1]: Starting udev Kernel Socket.
    [ 829.574239] systemd[1]: Listening on udev Kernel Socket.
    [ 829.574284] systemd[1]: Starting udev Control Socket.
    [ 829.574307] systemd[1]: Listening on udev Control Socket.
    [ 829.574332] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 829.574407] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 829.574419] systemd[1]: Starting Encrypted Volumes.
    [ 829.574426] systemd[1]: Reached target Encrypted Volumes.
    [ 829.574436] systemd[1]: Expecting device dev-disk-by\x2duuid-bb356f76\x2dd262\x2d43ca\x2da705\x2da2eab4b6d6ba.device...
    [ 829.574445] systemd[1]: Expecting device dev-disk-by\x2duuid-2796b7f1\x2d10c6\x2d481b\x2d91cb\x2d07cb7110031c.device...
    [ 829.574455] systemd[1]: Expecting device dev-disk-by\x2duuid-d169a015\x2d6ef6\x2d47f5\x2da6b2\x2d3db25ecce4a2.device...
    [ 829.574467] systemd[1]: Starting Journal Socket.
    [ 829.574507] systemd[1]: Listening on Journal Socket.
    [ 829.574529] systemd[1]: Mounting Huge Pages File System...
    [ 829.577956] systemd[1]: Mounting POSIX Message Queue File System...
    [ 829.591510] systemd[1]: Starting udev Coldplug all Devices...
    [ 829.594776] systemd[1]: Mounting Debug File System...
    [ 829.611201] systemd[1]: Starting udev Kernel Device Manager...
    [ 829.614769] systemd[1]: Starting Journal Service...
    [ 829.647758] systemd[1]: Started Journal Service.
    [ 829.647819] systemd[1]: Starting Syslog.
    [ 829.647843] systemd[1]: Reached target Syslog.
    [ 829.647879] systemd[1]: Starting home.automount.
    [ 829.901808] systemd[1]: Set up automount home.automount.
    [ 830.553864] systemd-udevd[249]: starting version 195
    [ 831.070954] ACPI: Requesting acpi_cpufreq
    [ 831.456015] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
    [ 831.456019] ACPI: Power Button [PWRB]
    [ 831.456058] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
    [ 831.456060] ACPI: Sleep Button [SLPB]
    [ 831.456097] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
    [ 831.457156] ACPI: Lid Switch [LID0]
    [ 831.457203] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
    [ 831.457206] ACPI: Power Button [PWRF]
    [ 831.457547] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 831.457548] AMD IOMMUv2 functionality not available on this system
    [ 831.615332] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 831.615336] Disabling lock debugging due to kernel taint
    [ 831.619625] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7745 MBytes.
    [ 831.619972] <6>[fglrx] vendor: 1002 device: 9488 count: 1
    [ 831.620506] <6>[fglrx] ioport: bar 1, base 0x2000, size: 0x100
    [ 831.620722] <6>[fglrx] Kernel PAT support is enabled
    [ 831.620735] <6>[fglrx] module loaded - fglrx 8.97.2 [Jul 4 2012] with 1 minors
    [ 831.621578] ACPI: Fan [FAN0] (off)
    [ 831.621623] ACPI: Fan [FAN1] (off)
    [ 831.631874] vboxdrv: Found 8 processor cores.
    [ 831.633478] vboxdrv: fAsync=0 offMin=0x19b offMax=0x1b771
    [ 831.633549] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 831.633550] vboxdrv: Successfully loaded version 4.2.4_OSE (interface 0x001a0004).
    [ 832.286066] ACPI: AC Adapter [ADP1] (on-line)
    [ 832.312526] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 832.315135] acpi device:03: registered as cooling_device10
    [ 832.315214] ACPI: Video Device [M86] (multi-head: yes rom: no post: no)
    [ 832.315347] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
    [ 832.409308] thermal LNXTHERM:00: registered as thermal_zone0
    [ 832.409312] ACPI: Thermal Zone [TZ00] (27 C)
    [ 832.421895] ACPI: Battery Slot [BAT0] (battery present)
    [ 832.422793] thermal LNXTHERM:01: registered as thermal_zone1
    [ 832.422797] ACPI: Thermal Zone [TZ01] (69 C)
    [ 832.590092] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3
    [ 832.970363] input: PC Speaker as /devices/platform/pcspkr/input/input9
    [ 833.240290] microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.240762] microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.241329] microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.241760] microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.242173] microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.242608] microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.243025] microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.243492] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 833.265118] wmi: Mapper loaded
    [ 833.267255] sdhci: Secure Digital Host Controller Interface driver
    [ 833.267258] sdhci: Copyright(c) Pierre Ossman
    [ 833.268312] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
    [ 833.268319] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 833.268323] ACPI Warning: 0x0000000000001180-0x00000000000011ff SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
    [ 833.268327] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 833.268329] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 833.512963] sdhci-pci 0000:09:00.0: SDHCI controller found [1180:e822] (rev 1)
    [ 833.513049] sdhci-pci 0000:09:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 833.513095] Registered led device: mmc0::
    [ 833.537204] mmc0: SDHCI controller on PCI [0000:09:00.0] using DMA
    [ 833.570607] input: Dell WMI hotkeys as /devices/virtual/input/input10
    [ 833.847354] EDAC MC: Ver: 3.0.0
    [ 833.930269] firewire_ohci 0000:09:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
    [ 834.096451] ite_cir: Auto-detected model: ITE8708 CIR transceiver
    [ 834.096454] ite_cir: Using model: ITE8708 CIR transceiver
    [ 834.096455] ite_cir: TX-capable: 1
    [ 834.096456] ite_cir: Sample period (ns): 8680
    [ 834.096457] ite_cir: TX carrier frequency (Hz): 38000
    [ 834.096458] ite_cir: TX duty cycle (%): 33
    [ 834.096459] ite_cir: RX low carrier frequency (Hz): 0
    [ 834.096460] ite_cir: RX high carrier frequency (Hz): 0
    [ 834.275945] iTCO_vendor_support: vendor-support=0
    [ 834.294684] cfg80211: Calling CRDA to update world regulatory domain
    [ 834.301218] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 834.430008] firewire_core 0000:09:00.3: created device fw0: GUID 324fc0001978e281, S400
    [ 834.433957] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
    [ 834.433962] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 834.446316] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
    [ 834.977790] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 834.977796] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 834.978266] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 835.102238] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 835.137263] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
    [ 835.147237] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 835.147687] hda-intel: 0000:02:00.1: Handle VGA-switcheroo audio client
    [ 835.147810] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
    [ 835.152252] Registered IR keymap rc-rc6-mce
    [ 835.152388] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input13
    [ 835.152451] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
    [ 835.152504] ite_cir: driver has been successfully l

    My disk seems also fine
    === START OF INFORMATION SECTION ===
    Model Family: Western Digital Scorpio Blue Serial ATA
    Device Model: WDC WD6400BEVT-75A0RT0
    Serial Number: WD-WX91C8077575
    LU WWN Device Id: 5 0014ee 600865d25
    Firmware Version: 01.01A01
    User Capacity: 640,135,028,736 bytes [640 GB]
    Sector Size: 512 bytes logical/physical
    Rotation Rate: 5400 rpm
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: ATA8-ACS (minor revision not indicated)
    SATA Version is: SATA 2.6, 3.0 Gb/s
    Local Time is: Thu Dec 20 21:36:56 2012 CET
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 248) Self-test routine in progress...
    80% of test remaining.
    Total time to complete Offline
    data collection: (16380) seconds.
    Offline data collection
    capabilities: (0x7b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 190) minutes.
    Conveyance self-test routine
    recommended polling time: ( 5) minutes.
    SCT capabilities: (0x7037) SCT Status supported.
    SCT Feature Control supported.
    SCT Data Table supported.
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
    3 Spin_Up_Time 0x0027 184 181 021 Pre-fail Always - 1775
    4 Start_Stop_Count 0x0032 079 079 000 Old_age Always - 21418
    5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
    7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
    9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4329
    10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1828
    191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 2336
    192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 512
    193 Load_Cycle_Count 0x0032 161 161 000 Old_age Always - 119448
    194 Temperature_Celsius 0x0022 106 089 000 Old_age Always - 41
    196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
    200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1
    240 Head_Flying_Hours 0x0032 095 095 000 Old_age Always - 4000
    241 Total_LBAs_Written 0x0032 200 200 000 Old_age Always - 13521667898
    242 Total_LBAs_Read 0x0032 200 200 000 Old_age Always - 14814445183
    254 Free_Fall_Sensor 0x0032 200 200 000 Old_age Always - 0
    SMART Error Log Version: 1
    No Errors Logged
    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Short offline Interrupted (host reset) 90% 4329 -
    # 2 Extended offline Completed without error 00% 4329 -
    # 3 Short offline Completed without error 00% 0 -
    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.

  • [SOLVED] Test conversion to systemd - Help with iptables status

    With all the discussion around systemd and with a move for systemd to [core] soon, I thought I would convert an arch laptop from initscripts to systemd and see how it worked.
    I followed the advice on the arch wiki for systemd, having already moved the systemd compatible parameters out of rc.conf a while ago. After installing systemd and systemd-arch-units, and adding init=/bin/systemd to the boot kernel line the system booted up nicely with systemd - graphical login failed as the relevant unit is not enabled at that stage - so hitting return to get a login prompt and logging as root it was quick to enable graphical.target and kdm.service, and rebooting then gave me a normal kdm login screen and then a normal login to kde.
    All fine at this point. (By the way total login time was just over 30 seconds for both initscripts and systemd) - then it was necessary to check which services were running - most were running by default under systemd including postfix, dovecot, and sound worked fine with a quick check on a browser for a video feed. Networking was working fine too.
    However iptables which was previously working fine under initscripts was not running - I checked that the firewall rules file was intact which is was.  Executing systemctl enable iptables.service appeared to be accepted but after executing systemctl start iptables.service and checking status again it was "exited" - the commands listed under the "start" command seemed normal and no error message appeared in the /var/log/messages file about iptables.
    Can anyone suggest what is needed to get iptables working under systemd (yes I have read the wiki entries but nothing seemed to be relevant to fixing that particular issue).
    Thanks in advance.
    Last edited by mcloaked (2012-08-30 09:01:25)

    cfr wrote:
    I think what you're seeing is normal. Does it give a 0 exit status?
    The service is of type "oneshot". I *think* that means that it is expected to exit.
    As I understand it, iptables is a bit like ipfw. It's in the kernel and the userspace tools just provide an interface to that. So there's no daemon to run.
    You can tell if it has worked correctly by
    iptables --list
    to check that your rules have been loaded correctly.
    Note: I hope somebody will quickly correct me if I'm wrong about this because I've been assuming this is the expected behaviour on my own machine!
    Perfectly correct - I didn't think to check iptables --list but yes all the rules are there as they should be.
    It would be nice to have this documented in the wiki under systemd to help anyone else coming across the same issue.
    I will mark this as solved in the topic title - thank you for replying - it was very helpful (and stopped me continuing the search for a solution by googling!)

  • RFC: Queries about Arch culture and community

    Good day everyone,
    This is a request for opinions from the Arch community, especially the Arch developers, Trusted Users, and long time users. I am writing a review about Arch Linux which I hope to publish within the next month or so. Unlike most distro reviews, which are actually distro installation reviews, I have devoted a lot of space to The Arch Way, unique technical qualities of Arch, day to day use and maintenance of Arch, and the Arch community. In my view, the community of a distro is much more important than its installation process.
    If I may, I would like to pose some questions about the Arch community. FWIW, I have been quietly participating in the Arch community myself for some months now, contributing material to the wiki. Anyway, please take a look at the queries below, and comment on any as you see fit.
    Thank you,
    Luke Seubert
    1. Despite its modest size, Arch has a very enthusiastic community, as evidenced by its internationalization projects, derivative distros, 3rd party repositories, Arch schwag, active forums and wiki, etc. Is this statement true or false, and if Arch does have an especially enthusiastic community, why?
    2. Arch is deeply conservative, refusing to deviate from core principles. Still, within these bounds, Arch permits a wide array of innovation. Are these statements true or false, and why? If true, what are the pros and cons of such conservatism? If false, in what way has Arch deviated from its core principles or resisted innovation?
    3. The Arch community is fairly harmonious, with little bickering, flamewars, forks or threats to fork, etc. Is this statement true or false, and why? (I have my own theory on the why of this one, and the answer in brief is... dogfood.)
    4. How good or bad a job is Arch doing in cultivating new Trusted Users and Arch developers? Does it have a formal mentoring process? It seems the most direct path to TU status is to put together packages in AUR, and eventually have them voted into Community based upon quality and popularity. However, at some point, virtually all of the popular packages will already be in Community or Extra. How does an AUR uploader become a Trusted User then?
    5. Hypothetical Scenario:
    The Chakra Project successfully completes in alpha, beta, and release candidate Live CD testing, and releases its Live CD - version 1.0 - with the GUI easy Tribe installer, to wide acclaim - DistroWatch even raves about it. Suddenly, there are lots of new Arch users, who never went through the traditional Arch install process, who never "paid their Arch dues", and who are not nearly as clueful because they never RTFW. They are flooding IRC and webforums with really, uh, "basic" questions, and suggesting/demanding new features. How does the Arch community handle this abrupt change in its culture? Has it dealt with such culture shocks before?
    6. If only you too could lift cars over your head, would you be more cool, less cool, or as cool as Phrakture, and why? What if you could only lift cars over your head after eating a can of spinach and slamming a six pack of Red Bull? Then how cool/not cool would you be by comparison?
    Last edited by lseubert (2009-08-08 13:45:07)

    Allan wrote:
    Here are my opinions on these questions and do not necessarily reflect other Arch devs...
    1. True.  I believe part of the enthusiastic community comes from the fact that Arch requires you to set up your system for yourself.  So people become very proud of their achievement of getting their system setup exactly as they like it.
    This is an excellent point. There is a nice sense of pride that comes from tweaking your Arch install to just the way you like it. And it is an involved process requiring some modicum of skill.
    Also, people have always been encouraged to contribute fixes or start projects to fulfill areas they see lacking.  Seeing your work become used by many others is always a good feeling.
    Yeah, I have noted this in my rough draft. Arch has amazingly low barriers to entry. Sign up for an AUR account, which is quick and automatic, and get to work. Your status and authority is derived from a roughly consensual meritocracy, as opposed to a hierarchical, bureaucratic process full of gatekeepers, aka potential gateclosers, like most distros.
    This simplicity extends to our package manager, which I believe is a major factor in making the AUR as popular as it is.  (Note that while pacman is developed primarily by Arch users, it aims not to be tied to any distro).
    Allan, could you clarify this comment? How does pacman make AUR popular? While I use pacman to access binaries from core, extra, and community; I use yaourt to handle PKGBUILDs from AUR. I don't quite follow you on this one.
    But as always, the principles guiding Arch do get bent when it is sensible to do so.  It was always said we don't split packages like many other distros, but we do some splitting these days (e.g. gcc-libs, KDE).  We now include info pages and other docs.
    Both of which are good moves. A system should have documentation built in, for those occasions when internet access is down. And I might actually take a look at KDE 4 once again, now that I wouldn't have to download a pile of unwanted packages.
    3. There are flame-wars every so often...  The last one that was probably quite obvious to many was changing rules governing the community repo (requiring votes or 1% usage as defined by pkgstats) and the move to using the official db-scripts (which may be seen as making the TUs less independent).
    That is a flamewar that I missed. How does Arch resolve difficult issues? There is no Constitution that I could find, nor any formal governing structure. Is it as simple as lengthy debate, and then Dred Overlord Phrakture decrees?
    I have never heard of a treat to fork the distro or components of it.  I guess that is because of the attitude of show us a working implementation of a good idea and it will possibly become official.
    Well, there aren't forks, but there are a lot of derivative distros, some of them with very different goals. And there are a lot of 3rd party repositories out there, outside of AUR. I wouldn't call that forking, but it is, I guess, extending. I think such experimentation is a good thing - really good ideas might be developed outside of even AUR, and eventually brought back into the Arch ecosystem. I believe some of Xyne's packages got started that way, yes?
    Here is an interesting factoid I came up with in my research:
    Packages Per Maintainer Ratio - how many packages on average does a maintainer support?
    For Debian, the P/M Ratio is 28
    When you add up all the Arch Devs and TUs, and divide out the packages in core, extra, and community, the Arch P/M Ratio is 67.
    Arch devs seem quite impressive, until you recall that they mostly maintain one version of each package and for only two architectures, whereas Debian devs support 11 architectures for 5 versions - experimental, unstable, testing, current stable, and old stable. (Ugh - is that brutal or what?)
    Seen in that light, one has to admire the very hardworking Debian devs, and wonder a bit about those Arch dev slackers. Yet another T-shirt idea! Change the first idea so it now reads, "I'm a slacker Arch developer, and I eat my own dogfood!"

  • Systemd-hostnamed.service fails to start

    I'm finding the systemd-hostnamed.service isnt working
    $ sudo systemctl --state=failed
    [sudo] password for kevdog:
    UNIT LOAD ACTIVE SUB DESCRIPTION
    ● systemd-hostnamed.service loaded failed failed Hostname Service
    LOAD = Reflects whether the unit definition was properly loaded.
    ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
    SUB = The low-level unit activation state, values depend on unit type.
    1 loaded units listed. Pass --all to see loaded but inactive units, too.
    To show all installed unit files use 'systemctl list-unit-files'.
    $ sudo systemctl status systemd-hostnamed.service
    ● systemd-hostnamed.service - Hostname Service
    Loaded: loaded (/usr/lib/systemd/system/systemd-hostnamed.service; static)
    Active: failed (Result: timeout) since Tue 2014-12-16 23:11:36 CST; 10min ago
    Docs: man:systemd-hostnamed.service(8)
    man:hostname(5)
    man:machine-info(5)
    http://www.freedesktop.org/wiki/Software/systemd/hostnamed
    Main PID: 4584
    Dec 16 23:08:35 orphan systemd[1]: systemd-hostnamed.service start operation timed out. Terminating.
    Dec 16 23:10:06 orphan systemd[1]: systemd-hostnamed.service stop-final-sigterm timed out. Killing.
    Dec 16 23:11:36 orphan systemd[1]: systemd-hostnamed.service still around after final SIGKILL. Entering failed mode.
    Dec 16 23:11:36 orphan systemd[1]: Failed to start Hostname Service.
    Dec 16 23:11:36 orphan systemd[1]: Unit systemd-hostnamed.service entered failed state.
    Dec 16 23:11:36 orphan systemd[1]: systemd-hostnamed.service failed.
    I found this addressed in this topic:
    https://github.com/ev3dev/ev3dev/issues/189
    Within this page they state:
    Confirmed that removing PrivateNetwork=yes from the service file works as a workaround. Maybe need to enable CONFIG_NAMESPACES=y and CONFIG_NET_NS=y kernel modules
    I removed the PrivateNetwork=yes from the service file, however this didn't seem to work.  I did not enable the kernel modules.  I am currently running the following kernel: 3.17.6-1-ARCH
    Thanks

    I'm finding the systemd-hostnamed.service isnt working
    $ sudo systemctl --state=failed
    [sudo] password for kevdog:
    UNIT LOAD ACTIVE SUB DESCRIPTION
    ● systemd-hostnamed.service loaded failed failed Hostname Service
    LOAD = Reflects whether the unit definition was properly loaded.
    ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
    SUB = The low-level unit activation state, values depend on unit type.
    1 loaded units listed. Pass --all to see loaded but inactive units, too.
    To show all installed unit files use 'systemctl list-unit-files'.
    $ sudo systemctl status systemd-hostnamed.service
    ● systemd-hostnamed.service - Hostname Service
    Loaded: loaded (/usr/lib/systemd/system/systemd-hostnamed.service; static)
    Active: failed (Result: timeout) since Tue 2014-12-16 23:11:36 CST; 10min ago
    Docs: man:systemd-hostnamed.service(8)
    man:hostname(5)
    man:machine-info(5)
    http://www.freedesktop.org/wiki/Software/systemd/hostnamed
    Main PID: 4584
    Dec 16 23:08:35 orphan systemd[1]: systemd-hostnamed.service start operation timed out. Terminating.
    Dec 16 23:10:06 orphan systemd[1]: systemd-hostnamed.service stop-final-sigterm timed out. Killing.
    Dec 16 23:11:36 orphan systemd[1]: systemd-hostnamed.service still around after final SIGKILL. Entering failed mode.
    Dec 16 23:11:36 orphan systemd[1]: Failed to start Hostname Service.
    Dec 16 23:11:36 orphan systemd[1]: Unit systemd-hostnamed.service entered failed state.
    Dec 16 23:11:36 orphan systemd[1]: systemd-hostnamed.service failed.
    I found this addressed in this topic:
    https://github.com/ev3dev/ev3dev/issues/189
    Within this page they state:
    Confirmed that removing PrivateNetwork=yes from the service file works as a workaround. Maybe need to enable CONFIG_NAMESPACES=y and CONFIG_NET_NS=y kernel modules
    I removed the PrivateNetwork=yes from the service file, however this didn't seem to work.  I did not enable the kernel modules.  I am currently running the following kernel: 3.17.6-1-ARCH
    Thanks

  • Developers Wanted -- Apply Within

    Hello all,
    First, a little history.  Up until now, the development process was fairly short and simple.  The existing developers kept a watchful eye on the community for knowledgeable, helpful and prolific users.  When the time came to grow the team, I would approach them and ask if they'd like to join the ranks of the overworked/underpaid Arch developers.  Sometimes they would accept, sometimes they'd laugh at me and say they were too smart to fall for that trick.
    But the times are a changin'.  The community is larger; the developers are quite busy with development work and aren't keeping the same watchful eye on our burgeoning community.  When the call for nominations goes out, we're hard-pressed to come up with just a few.  Not because there aren't good candidates out there, but just because we don't know who they are anymore.
    So this is my attempt at a more open recruitment process.  Even though there's no monetary remuneration, I'm going to treat this more or less as a real job opening.  I will post the openings available and a basic list of what you will be doing to start (I say "to start" because many of us evolve our positions and duties within the Arch team).  If you feel are you are qualified for a position and you'd like to apply, you can email me a brief informal resumé/CV and the specific job you'd like to apply for (or post it on the forum if you like).
    Ideally, we are looking for relatively "permanent" members of the community who have a sustained level of contribution to Arch and the community as a whole.  This means that the lucky applicants will likely already be involved in some sort of project related to Arch.  They will have been in the community for at least a few months, and show no sign of leaving anytime soon.
    It's pretty obvious criteria, but I thought I'd state it for the record anyway.  Many people email me, saying they have just started using Arch and would love to help out on the dev team.  To these people, I say Great!  Please continue using it and helping others to use it; innovate on it; extend it; document it; do something on your own initiative to show us that you can hack it on the development team.
    That's it.  Thanks for reading, everyone, and please leave comments and suggestions below.  We are growing, and some of our policies and processes need to grow as well.
    I will post a few job openings soon.  Stay tuned.

    Cracy!
    YOU have no name
    YOU have no company
    YOU have only a spammer mail adress
    serious offer ? for whom and where in this world?

  • Systemd broken

    Hey I updated my arch install according to the systemd guide on the wiki but now systemd boots up normally, I can start to login (and probably would succeed were I fast enough) but then it reproducably shuts down again. This is a log of the last time I bothered trying to start this way. http://pastebin.com/AiTUnDjC
    I already removed sysvinit and initscripts, so I doubt they are the culprit. More than happy to provide more info, but I don't know where to start to debug this. Any ideas?
    Last edited by kaste (2013-04-18 06:01:13)

    lumpl login[338]: FAILED LOGIN SESSION FROM pts/0 FOR (unknown), Error in service module   >>> thats weird
    did you enable or disable any .service s since the upgrade?
    btw: you could always chroot and do some maintenance

  • KDM not working after systemd migration

    I migrated my running desktop arch installation over to a systemd/initscripts configuration.  sysvinit has been removed and systemd-sysvcompat has been installed as per the systemd article.
    I have everything working as before except for kdm.  Previously I started kdm vis inittab.
    I have followed the instructions in the wiki (https://wiki.archlinux.org/index.php/Sy … er_systemd)
    systemctl enable kdm.service
    (this succeeds)
    I do not have a default.target already set that would cause problems.
    When I reboot the system, I get a text login and nothing on tty7.  If I login as root and run a
    systemctl --all
    it shows that kdm.service has loaded (but I dont see KDM).  If i run
    systemctl stop kdm
    systemctl start kdm
    kdm will loads right up and works fine.
    There isn't much more information in the documentation about this other than to enable the service it and it should work.  Does anyone know why KDM doesn't load up automatically at boot (even though it starts automatically) or how I could further troubleshoot this?

    No luck with the default.target but here was an interesting section I found with journalctl:
    Oct 15 19:20:06 matt systemd[1]: Starting K Display Manager...
    Oct 15 19:20:06 matt systemd[1]: Started K Display Manager.
    Oct 15 19:20:06 matt systemd[1]: Starting Getty on tty1...
    Oct 15 19:20:06 matt systemd[1]: Started Getty on tty1.
    Oct 15 19:20:06 matt systemd[1]: Starting Login Prompts.
    Oct 15 19:20:06 matt systemd[1]: Reached target Login Prompts.
    Oct 15 19:20:06 matt winbindd[247]: [2012/10/15 19:20:06.265774,  0] winbindd/winbindd_cache.c:3147(initialize_winbindd_cache)
    Oct 15 19:20:06 matt winbindd[247]: initialize_winbindd_cache: clearing cache and re-creating with version number 2
    Oct 15 19:20:06 matt smbd[248]: [2012/10/15 19:20:06.326121,  0] smbd/server.c:1109(main)
    Oct 15 19:20:06 matt smbd[248]: standard input is not a socket, assuming -D option
    Oct 15 19:20:06 matt systemd[1]: Started Login Service.
    Oct 15 19:20:06 matt systemd[1]: Starting Multi-User.
    Oct 15 19:20:06 matt systemd[1]: Reached target Multi-User.
    Oct 15 19:20:06 matt systemd[1]: Starting Graphical Interface.
    Oct 15 19:20:06 matt systemd[1]: Reached target Graphical Interface.
    Oct 15 19:20:06 matt systemd[1]: Starting Update UTMP about System Runlevel Changes...
    Oct 15 19:20:06 matt systemd-logind[249]: Watching system buttons on /dev/input/event5 (Power Button)
    Oct 15 19:20:06 matt systemd-logind[249]: Watching system buttons on /dev/input/event4 (Power Button)
    Oct 15 19:20:06 matt systemd-logind[249]: New seat seat0.
    Oct 15 19:20:06 matt systemd[1]: Started Update UTMP about System Runlevel Changes.
    Oct 15 19:20:06 matt systemd[1]: Startup finished in 3s 75ms 868us (kernel) + 694ms 214us (userspace) = 3s 770ms 82us.
    Oct 15 19:20:06 matt winbindd[247]: initialize_winbindd_cache: clearing cache and re-creating with version number 2
    Oct 15 19:20:06 matt smbd[248]: [2012/10/15 19:20:06.326121,  0] smbd/server.c:1109(main)
    Oct 15 19:20:06 matt smbd[248]: standard input is not a socket, assuming -D option
    Oct 15 19:20:06 matt systemd[1]: Started Login Service.
    Oct 15 19:20:06 matt systemd[1]: Starting Multi-User.
    Oct 15 19:20:06 matt systemd[1]: Reached target Multi-User.
    Oct 15 19:20:06 matt systemd[1]: Starting Graphical Interface.
    Oct 15 19:20:06 matt systemd[1]: Reached target Graphical Interface.
    Oct 15 19:20:06 matt systemd[1]: Starting Update UTMP about System Runlevel Changes...
    Oct 15 19:20:06 matt systemd-logind[249]: Watching system buttons on /dev/input/event5 (Power Button)
    Oct 15 19:20:06 matt systemd-logind[249]: Watching system buttons on /dev/input/event4 (Power Button)
    Oct 15 19:20:06 matt systemd-logind[249]: New seat seat0.
    Oct 15 19:20:06 matt systemd[1]: Started Update UTMP about System Runlevel Changes.
    Oct 15 19:20:06 matt systemd[1]: Startup finished in 3s 75ms 868us (kernel) + 694ms 214us (userspace) = 3s 770ms 82us.
    Oct 15 19:20:06 matt smbd[266]: [2012/10/15 19:20:06.499229,  0] printing/print_cups.c:151(cups_connect)
    Oct 15 19:20:06 matt smbd[266]: Unable to connect to CUPS server /var/run/cups/cups.sock:631 - No such file or directory
    Oct 15 19:20:06 matt smbd[248]: [2012/10/15 19:20:06.499462,  0] printing/print_cups.c:528(cups_async_callback)
    Oct 15 19:20:06 matt smbd[248]: failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
    Oct 15 19:20:06 matt kernel: firewire_core 0000:04:00.0: created device fw0: GUID 0010dc00019a91af, S400
    Oct 15 19:20:06 matt kdm[255]: X server died during startup
    Oct 15 19:20:06 matt kdm[255]: X server for display :0 cannot be started, session disabled
    Oct 15 19:20:06 matt kernel: input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input15
    Oct 15 19:20:06 matt kernel: input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input16
    Oct 15 19:20:06 matt kernel: input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input17
    Oct 15 19:20:06 matt kernel: input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input18
    Oct 15 19:20:06 matt kernel: vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    Oct 15 19:20:06 matt kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.51  Tue Sep 18 17:16:56 PDT 2012
    It seems that systemd is trying to load KDM before the nvidia driver is loaded.
    How can I rearrange the boot order to correct this?  I thought systemd was supposed to figure out the order automatically.
    Last edited by mattbarszcz (2012-10-15 23:30:39)

  • [solved] vconsole.conf FONT setting is not respected in systemd

    I recently converted my Arch system to a pure systemd setup (as described here), and everything seems to be working as before.
    Well, almost everything.
    Prior to switching over to systemd, I had already moved all config settings (except for the DAEMONS line) out of /etc/rc.conf and into the individual config files, and at that time, I had set up /etc/vconsole.conf as follows:
    KEYMAP=us
    FONT=ter-216n
    FONT_MAP=8859-2
    When running under initscripts, this was working fine, and I would get the nice Terminus font at my console TTYs. Now, running under systemd, the consoles are no longer using Terminus. Instead, I just get the default font (whatever it's called). It's as if the FONT I set in /etc/vconsole.conf is being ignored.
    systemctl reports the following, indicating (I think) that the systemd-vconsole-setup service ran successfully:
    [owner@computer ~]$ systemctl status systemd-vconsole-setup.service
    systemd-vconsole-setup.service - Setup Virtual Console
    Loaded: loaded (/usr/lib/systemd/system/systemd-vconsole-setup.service; static)
    Active: active (exited) since Wed, 08 Aug 2012 08:31:51 -0700; 9h ago
    Docs: man:systemd-vconsole-setup.service(8)
    man:vconsole.conf(5)
    Process: 151 ExecStart=/usr/lib/systemd/systemd-vconsole-setup (code=exited, status=0/SUCCESS)
    CGroup: name=systemd:/system/systemd-vconsole-setup.service
    So, I'm stuck. Can anybody point me in the right direction?
    Last edited by Steven Monday (2012-08-09 05:31:49)

    89c51 wrote:
    ... it should be
    FONT_MAP=8859-2_to_uni
    Yes, you're right. I have updated my /etc/vconsole.conf accordingly.
    However, I just tested this, and it turns out that my FONT_MAP mistake was not relevant to my original problem.
    progandy wrote:I didn't modify the file, but then I use Early KMS start for my radeon driver.
    https://wiki.archlinux.org/index.php/Ke … _KMS_start
    Interesting. It turns out that using early KMS start also solves my console font problem. I think I prefer this solution, since it doesn't involve overriding systemd-vconsole-setup.service. Enabling early KMS start feels like a less invasive change. As documented here, I simply added i915 to the MODULES line in /etc/mkinitcpio.conf, and then rebuilt the /boot/initramfs-* files.

Maybe you are looking for

  • Time Capsule Can't connect to my wireless network

    Hi there, I can't connect my new Time Capsule to my existing wireless network. I followed screen instructions, set up my network name and password, then time capsule need to be disconnected and then nothing.. My MacBook Can't see Time Capsule I did r

  • Can I have 2 iCloud accounts on an iPad?

    I want to share the use of my iPad with a family member so they can review their photo stream. I still want all of my details to be able to be synced via my iCloud account. How can I get both accounts to work on one iPad?

  • Error Installation SAP ITIM

    Gives the following error when installing the SAP ITIM is: If the Reporting Services is installed on the server: Windows Server 2008 r2 with SQL Server 2008 Sp2 Plase help, thanks Luis Angel

  • Database upgrade

    Hello I had ugraded database from 9.2.0.5 to 9.2.0.8 by applying 4547809 following patch it is oracle apps 11.5.`10.2 database just test system. i could not able to start the sqlplus to start databse pls let me knw solution for the above reason tks/r

  • WCF Samples

    I'm looking to connect to CRM On Demand using stateless web services transactions, however I'm having a hard time finding the right binding configuration for WCF (.Net 3.5). As per documentation, WS-I login mechanism must be used (UsernameToken). I'l