Do AVCHD clips have to be render to view them in the timeline?

When I place a AVCHD clip in the timeline I have to render it to view it. When I place a HDV in the timeline I can view it without having to render it? Do I need to reconfigure a setting somewhere to view AVCHD in the timeline without rendering the clip first?

Yes, the AVCHD was recorded at 1920x1080. I changed the setting to 1440x1080 on the HF100 and it plays in the timeline without rendering. Thanks for the support.
So, would this explain why the HF100 footage render at 1920x1080 looks so much sharper than the HV30 at 1440x1080? I have been comparing the HV30 with the HF100 side by side trying to decide which one I want to keep. Thanks again.

Similar Messages

I just downloaded Yosemite and all my iPhotos have disappeared! I tried importing them from the photo library but it said there wasn't enough space on my hard drive which is rubbish, because they were there before. How do I get them back to iPhoto?

I just downloaded Yosemite and all my iPhotos have disappeared! I tried importing them from the photo library but it said there wasn't enough space on my hard drive which is rubbish, because they were there before. How do I get them back to iPhoto?

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them as the area is just left blank! Nothing has been done to have changed this?

Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them in the content area! Nothing has been done to have changed this?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

HT1386 I have sync an ipad with a new computer and the photos have been transfered into files with no extensions. I can view them on the ipad but canot view and delete from the computer.

I have synced a new computer with the ipad and the photos have been transferred as a file with no exstention. I cannot view them on the computer but can on the ipad.

Well I forget the exact keys, but believe pressing and holding down CTRL before clicking Restore will allow you to browse and find the backup file (may be wrong).
In the end, as far as the iPhone thinks, it is a new computer so it will erase and resync stuff and as long as you loaded everything back into iTunes all should sync back. Main issue is other stuff like the data within the apps, notes, etc that are part of the backup which is why you would want to try to restore from the backup. If you don't mind losing data in apps (eg: do you care you have to relog into some apps and start over, don't care about game scores, etc) then you don't have to worry about the backup. If you have important data in some of those apps then you will need to restore from the backup.

Is there a way to have my e-mail messages stay unopened on my computer after I have viewed them with the blackberry

Not sure if there is a setting on the blackberry but my work e-mail(s) will also be sent to my blackberry. After I have viewed them on the blackberry, if I go to my desttop computer, the e-mails will already have been opend (not bold). Just wondering if there a setting that can be changed or should I contact our IT dept.

The app that I am using came on the Samsung tv. It is called mediaplayer. I have updated the firmware on the tv but it did not change the app or update it. The same thing happens. It recognizes the photos but not the videos. My friend also has a Samsung tv (differnet model) and I connected the touch to his and the same thing. He has a Motorolla Droid and when he connects it to his tv via a USB cable it does recognize his videos so I imagine that his Droid records videos with the mp4 extension.
So I am back to my original question. Is there a way to make the mp4 extension as the default when recording videos on the touch?

How can I save the .mp4 files downloaded from internet to ipad memory so that I don't have to download everytime to view them again

How can I save the .mp4 files downloaded from internet to ipad memory so that I don't have to download everytime to view them again. Also they might remove them from internet so I can't rely on the bookmark to them.

I'm trying to send home movies to my 10 year old nephew who lives across the country. He doesn't have a computer. He has an iPod touch. His parents have computers. But I don't want everything I ever try to have him do result in "you need your parent's computer for this." It's getting really embarrassing. I have converted my family over to Apple computers but now they want to buy iPhones, iPads, and iPods even though I tell them to go Android. It took a decade to convert them away from windows now I'm trying to keep them away from these freedom limited iOS devices and they won't listen. Then it becomes my responsibility to make their iPads print to their fancy pre-airprint color laser jet printers, get home movies onto them, and countless other things. It's driving me nuts.
I have converted these files to a format that the iOS devices will play directly off of dropbox. Now, how do I get the infernal devices to save it instead of play it?

HT2265 for some reason the only photos that do the random scrolling are events, can I include the albums from iphoto to scroll as well. the know the albums have synced because i can view them in slideshow

for some reason the only photos that do the random scrolling are photos in the events section of iphoto. is it possible to include the albums from iphoto to scroll as well. the know the albums have synced because i can view them in slideshow pls help

Welcome to the Apple Community.
I assume you are referring to the screensaver. You can change the photos used by the screensaver in the screensaver settings. Note if you have a large number of photos in the collection you choose for screensaver, not all of them will be used due to the limited storage available to the Apple TV.

My connected audio only clips moved from below to above the timeline. What happened? How do I get them below the timeline again?

My connected audio only clips moved from below to above the timeline. What happened? And how do I get them below the timeline again?

Repeatedly crashes. What I ended up doing was using a backup Final Cut Projects file and jettisoning this one with the glitch. Luckily, nada much lost. I've had a couple of these weird glitches happen in the Timeline, esp. when dealing with compound audio-only clips & some fx's and rather than spending mega time trying to fix the problem, I bail and start again, and try to be more methodical in my approach.

After relinking MTS/AVCHD Clips have no audio

Hi,
I have a problem with avcdh-clips. They had been imported porperly, so that I allready have worked with them.
Today I opended the project, and all the MTS-Files were offline. I tried to relink them - and was warned, that they´ll come with no audio. Which they actually don´t have anymore. I tried to relink the same clips from the backup-disk. Same result. I tested the avchd-clips with prelude and QT-Player - they do have audio.
Also if I import them fresh in PrP, they are just fine with audio.
But with the relinking it just doesn´t work.
Who can help?
PS: I trashed the plist as suggested by adobe support. Changed nothing.

I have the same issue but slightly different. Using Premiere CC. I Imported .mts removed the audio and linked .wav files to the video from an interview. I did this cause I mic'd the audio with a seperate computer as my video camera mic isn't so hot. It's worked fine over and over again. Once the files were edited and placed into the sequence all should be good after all they are just audio files.... WRONG!
I opened my file up after a 3 day break only to find that all of the linked audio from the interview was gone from my sequence. Now that wouldn't be that bad of a thing except the fact that it was like 8 hours worth of work... I checked the file browser and everything was still there. BUt on my main sequence all of the interview materal was simply gone as if it had been deleted off the timeline.... there were even two empty audio tracks left with nothing on them???
I'm sorry but I just have to say after the "premiere can't recognize a filter bug in CS6" and now this bug it makes me want to just switch to Final CUt... how many times am I going to have to start over because of a bug in premiere... I mean 3 months from now is adobe going to release another version of premiere that doesn't glitch and you have to pay per month again to use like CC... Sorry I can't have 8 hour bugs every other month on my video editing software..

How do I export photos back onto a camera SD card? I have created a desktop file for photos and SD card in Finder, dragged photos to card, but when I try to view them in the camera, it says "No valid photo to display"

How do I export photos back onto a camera SD card? I have created desktop files for the photos and the card, dragged photos to the card, but when I replace card in camera, it says "No valid photo to display". I just need to get some prints made and have been struggling with this for hours. Thank you.

No one can help you any more than has been done
Your camera is not a general purpuose photo display system - it is designed to take photos, let you look at those photos and allow you to download them to your computer or other places - if you wnat to use it view photos then you have to put the photos in exactly the correct place with exactly the correct names or it will not see them
And this has absolutely nothing to do with iPhoto in any way - iPhoto sotres and proecesses yoru photos and allows you to export them - once you export them it is totally out of the picture - you can easily get photo prints by using the iPhoto print service, using an internet print service, burning photos to a DVD and taking them to a print service or putting them on a SD card and taking them to a print service - to view them on your camera you have to exactly reporduce what the camera is looking for - not at all sure what the pirnt even is
LN

Macbook pro fails to read sd card with movies recorded on it, any ideas? I can view them in the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it.

My macbook pro is failing to read a new sd card with movies recorded on it. Any ideas please? A previously used SD card has downloaded without problems. I have tried using a card reader as well as downloading from the video camera itself, neither works.
I can view the latest recordings on the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it but didn't think of that at the time. Obviously don't want to do this now as it will wipe the movies.

Hi and Welcome to the Forums!
From everything you've described, you've done everything possible. Hence, I recommend you seek out your warranty support.
Good luck and let us know.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My notes started crashing and have been every time I open them for the past few months. They're still included in search but when I click on one, it opens for a brief second but crashes before it's opened completely. Anyone know how I can fix this?

Restarting my iPad didn't work and I can't delete the notes app, since it's one that came with the iPad (I'd lose all my notes that way, anyway). Someone mentioned once that when they synced it with their laptop their notes started working again, but I'd never backed it up to my laptop before, only iCloud.

This answer from beppolina (https://discussions.apple.com/message/23842867#23842867)
Fixed it -- go to Settings - General - Reset and select "Reset All Settings." Still annoying, because now you have to go back and re-do all of the ways you customized your settings, but at least Notes is back.
Now if only they'd fix this major "connect to itunes to use push notifications" alert bug that's a constant irritant in some apps and disables others (Dropbox, I'm looking at you) completely.

When I plug my iPhone into my mac it says no camera found. But i still have pictures but i cannot view them.

If anybody can help me with this please help. I need some pictures that are on my phone please help.
Thanks again,
Alec

See here: http://support.apple.com/kb/HT4083
You should be able to transfer them again with whatever camera photo program you have on your computer. I use Picasa 3 to manually select my photos for transfer.

Do you have to repurchase videos to see them in the higher resolution?

Ive got a few videos purchased at 320x240. Now everything is at 640x480, do I have to repurchase the videos? How can I redownload without paying again?
That would be kind of silly.
g5 Mac OS X (10.4.5)

Resolution is not controlled by DRM nor mentioned in the EULA. I would say at this point that it is safe to say that we simply disagree and leave it at that. I have stated how I feel and you have made your viewpoint known as well. I appreciate the intelligent discussion, but I still feel as if they should correct this. We aren't even talking about a format change here, just a software upgrade that affects our past purchases. I just think that if consumers keep supporting companies that are doing this, we are headed down a road where we will have to pay each time we want to hear a song or watch a video. I know that I don't look forward to this no matter how others feel.

Firefox crashes when loading some pages I have looked at plug-ins and themes as the problem but I do not have any of the ones that are listed as causing problems.

Recently I downloaded some up grades for my computer and now FireFox crashes when I try to change pages on web sites. It crashes in financial sites, my earthlink email account and a business web site I manage.

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

Do AVCHD clips have to be render to view them in the timeline?

Similar Messages

Maybe you are looking for