Do .bmp images get migrated with sapscript?

I have finally SUCCESSFULLY imported several .bmp images into my SAPSCRIPT.  I am now ready to migrate from Dev to Quality environments.  Do I have to re-import the images to each environment, or will they go along with the transport?  I don't see the images as part of the transports, so I'm thinking that they will need to be re-imported into each.  However, we do not allow any development in the Q environment.  Is this considered outside of normal development in some way?

Hi
You have to import into each enviornment but the name of the file should be same.

Similar Messages

  • Lightroom 4 - Print the Perfect Image | Getting Started with Adobe Photoshop Lightroom 4 | Adobe TV

    Learn how to use the Print module to bring your images into the spotlight and share with clients, friends or family. Also, see the new tools for making custom contact sheets and print packages.
    http://adobe.ly/wqFX7Y

    I love Julieanne Kost’s videos.  The one on the print module did not mention some gotcha’s.  I find this module very frustrating.  I have thousands of pictures of wild horses and decided to print a few pages with photos of the right and left side of the horse to make it easier to identify the many pintos.  I made a grid of 4 x 2 cells on each page and then tried to drag and drop the photos from the film strip.  The first cell filled as expected but when I tried a different photo in the next cell it replaced the first cell’s photo!  I could not figure out what was going on.  I didn’t know you had to move the photos in the film strip to put them in the order I wanted.  I had only used the print module to print single photos and had not used collections before.  After spending a lot of time trying to find out what I was doing wrong I found out you couldn’t drag and drop in the Single image/ contact sheet layout!  This took over an hour.  I tried a different style only to find that the picture package would only use one picture.  Well, the custom package did what I wanted it to do.  Great, so now I needed to print the captions with the names of the horses and spent another hour trying to get that to print only to discover you could only do that in the Single image/ Contact sheet!  In that layout you can only have cells the same size with no mixing of portrait and landscape orientation!  Not only that, I only had a picture of one side of a few horses and couldn’t skip a cell in that layout so had to go to Photoshop and create a blank photo to use as a place holder.   I had to fill the bottom of a page with blank photos to get a new page if it didn’t want pictures in all the cells of a particular page.  This all caused me hours of frustration and pounding my head on the desk.  I tried going to the book module but couldn’t create an 8 photos per page like in the contact sheet layout. 
    Maybe you could tell us why we aren’t allowed to print captions in all of the layout styles and why we can’t drag and drop in all the layout styles in any order we want.  Why the Custom Layout style isn’t the only one.  Why all the templates supplied are not using the Custom Layout package.  Why is this so hard? 
    Thank you  -- Eric Hill

  • Lightroom 5 - Importing Your Images | Getting Started with Adobe Photoshop Lightroom 5 | Adobe TV

    Discover how to quickly download and import your images into Lightroom. Then, decide which method is the most efficient for your workflow.
    http://adobe.ly/11iaqIz

    I don't have a card slot on my Macbook pro  it's about 4-5 years old. I have a Canon EOS 500. When i want to import i use a cable that plugs from the camera into a USB port downloading in either iPhoto o Photoshop. Can I do this also with lightroom or do I need to get a card adapter?
    Thanks, Patrick

  • Images getting overlapped in sapscript?

    Hi all,
    I have one small problem.In my company there is PO form.At the end of the PO,I have to attach my code.I am getting one small problem,which I and my freinds are unable to resolve it for the past 10 days.I commented my entire code and checked with the below example.Even though I am getting the same wrong data.So,problem is not with my code.
    At the end of the PO below is the code.I have one global variable 'X' declared in top include.
    ****End of existing PO code*********
    ****Begin of my code*******
    X = '1'.
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    ELEMENT = 'POSPEC'
    WINDOW = 'MAIN'
    EXCEPTIONS
    ELEMENT = 1
    FUNCTION = 2
    TYPE = 3
    UNOPENED = 4
    UNSTARTED = 5
    WINDOW = 6
    BAD_PAGEFORMAT_FOR_PRINT = 7
    SPOOL_ERROR = 8
    CODEPAGE = 9
    OTHERS = 10.
    X = '2'.
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    ELEMENT = 'POSPEC'
    WINDOW = 'MAIN'
    EXCEPTIONS
    ELEMENT = 1
    FUNCTION = 2
    TYPE = 3
    UNOPENED = 4
    UNSTARTED = 5
    WINDOW = 6
    BAD_PAGEFORMAT_FOR_PRINT = 7
    SPOOL_ERROR = 8
    CODEPAGE = 9
    OTHERS = 10.
    POPEC is text element in main window.It creates a new page POSPEC
    /E POSPEC
    NEW-PAGE POSPEC
    I have one variable window,which has the variable 'W'.Now I have to get 2 new pages(POSPEC) with W as '1' on the begining page and W as '2' on second page.But unfortunately I am getting W as '2' on the two pages.Remember W is on the variable window of the page 'POSPEC'.
    Like the same way,Bitmap images are getting overlapped.
    Can anyone help me in this regard.It is very very urgent.I have been struggling a lot.
    I know the solution that if we print in main window then there wont be any issues.Could you please let me know other alternate solution other than Main Window.My problem is I have to remove main window and create another window,which is bigger than main window.This we need because our Bitmap images will be too bigger.So I created new page with new variable window.Main window is part of PO .I modified both Print program and PO form to include my Modifications immediate after PO starting with new page.
    So I can't create a new page with Main window.Since parameters for Main window are fixed and they are not allowing bitmaps to be fit.
    Finally I want more space on the page to print my bitmap images,which are bigger than main window dimensions.
    Please let me know if you have any questions.
    Thanks,
    Balaji

    Very big question whatever i have understood
    -For big bitmap image first try to reduce the size and then uplaod
    -insert this image in a variable window similar to footer
    Not clear because as per your msg
    I have one variable window,which has the variable 'W'.Now I have to get 2 new pages.
    but in coding the POSPEC text element is being called in main window.
    Try to include X in any other variable window for printing.
    anya

  • Lightroom 5 - Print the Perfect Image | Getting Started with Adobe Photoshop Lightroom 5 | Adobe TV

    Learn how to use the Print module to bring your images into the spotlight and share with clients, friends or family.
    http://adobe.ly/12t2aN8

    Can you do Proof for printing in LR5 like in PS?

  • Lightroom 4 - Importing and Organizing Your Images | Getting Started with Adobe Photoshop Lightroom 4 | Adobe TV

    Discover the most efficient method for downloading images into Lightroom and organizing them. Quickly import and manage your photo collection in a library that makes organizing, finding and editing your photos easy.
    http://adobe.ly/zQmi8t

    Ms. Kost,
    I am an event photographer and new to Lightroom.  I just got Lightroom 4 and am just starting to watch your videos.  This first one demonstrates your great step by step teaching method that's very informative and I'll be watching more.
    As an event shooter, I usually shoot with two cameras, each with a different lens.  I would very much like Lightroom to be able to SORT the files from both cameras during the Import phase and order them by the TIME that the shots were taken, or Chronologically, rather than to sort each group of files from each camera individually.  Since I do my editing and presenting in chronological order, I would like them sorted as if I shot them all with one camera.  My current method is to import to Lightroom after first using Bridge to import to the main SSD drive on my Macbook Pro, although I can change this method if need be.
    Is this possible? I didn't notice this option explained in this video if it exists.
    Thanks in advance!

  • Savepoints don't get migrated with dbms_wm.export dbms_wm.import

    It there a way to migrate all the save points from one database to another with dbms_wm.export and dbms_wm.import?

    Hi,
    dbms_wm.export and dbms_wm.import were only intended to be used to allow the latest rows as viewed from a workspace, savepoint, or point in time to be imported into another workspace. They do not support recreating the savepoint hierarchy that existed on the export database.
    The only way to maintain all of the savepoints, is to use the full database import/export.
    Regards,
    Ben

  • Lightroom 4 - Select, Rate and Prioritize Your Images | Getting Started with Adobe Photoshop Lightroom 4 | Adobe TV

    Find out which method of tagging images works best for the photography you do in order to simplify the creation of collections of images.
    http://adobe.ly/xGuxSt

    Julieanne, your tutorials are hands down the best and the most professional I have ever come across. I really feel like I am back at school listening to my favorite teacher.
    Thanks!

  • Lightroom 5 - Creating Custom Collections of Images | Getting Started with Adobe Photoshop Lightroom 5 | Adobe TV

    Discover how to simplify the creation of virtual groups of images using Collections, Smart Collections and Collection Sets in Lightroom.
    http://adobe.ly/12t11p3

    Is there anyway that we can create a Template of a Collection Set Structure?
    I have a particular Structure Set that I use for my Collection Sets, and the Collections within them for each time I do a shoot session.
    Is there anyway that I can streamline the process of making these structures instead of doing it one collection at a time?
    I can't seem to find it at the moment. A possibility for the Future?
    Thanks

  • Lightroom 5 - Organizing Your Images | Getting Started with Adobe Photoshop Lightroom 5 | Adobe TV

    Learn how to organize your images in Lightroom using the Folder panel so that finding, moving and editing your images is a breeze.
    http://adobe.ly/12t0KCm

    When images from one folder are moved to an other in Lightroom, what steps does Lightroom perform to insure the integrity of those image are perfectly copied and not corrupted? 

  • Lightroom 4 - Create Stunning Images | Getting Started with Adobe Photoshop Lightroom 4 | Adobe TV

    Learn how to create the highest quality photographs by learning how to crop, remove lens distortion, correct perspective, make global and local color and tonal corrections in the Lightroom 4 Develop module.
    http://adobe.ly/wH0Q2v

    Julieanne, I thank you for being a very clear presenter. Excellent help. I have just bought Lightroom and you are helping me on the steep learning curve.
    Brian

  • Problem with animated gif image getting displayed

    My problem is that my animated image does not get displayed properly. I am extending JButton and the button already contains a static image. I want to display the animated image over the static one for some reason. If I replace the animated image with a static gif, then there is no problem.
    Here is the code that I am using
    Icon anim = new ImageIcon((new ImageLoader()).getImage("/graphics/busy.gif"));
    // thread to call displayAnim method
    class ColorThread extends Thread {
    ColorThread() {
    public void run() {
    while (AnimFlag) {
    try {
    displayAnim();
    Thread.sleep(400);
    } catch (InterruptedException e) {
    public void displayAnim()
    repaint();
    public void paint(Graphics g)
    super.paint(g);
    int x=5;
    int y=0;
    if ( AnimFlag) {
    anim.paintIcon(this,g,x,y);

    This code is working fine for JRE 1.2 and the animation is displayed. The problem is with JRE 1.3. when there is no animation, neither is there any image getting displayed.

  • Migration Request getting failed with error code 152

    Hi Experts,
    We are creating a migration request for moving a transport along the path Development-Quality-Production ( tcode                        /POWERCOR/MRCRE ). But the import into Quality is getting failed with return code 152 and status code E. While the transports without creating the migration request are normal. Please let us know how we can resolve this issue.
    Thanks in advance.
    Regards,
    Surendra Julury,
    +91 9611107275

    Try running the exe remotely on a computer using PSExec under the system context. What happens?
    See here for PSExec - you need the -s switch for local system
    http://technet.microsoft.com/en-ie/sysinternals/bb897553.aspx
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson
    If you do this then you will know. This mimics the behaviour of the ConfigMgr deployment. Use the same .exe -silent etc.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • I am getting problem with eps image coordite while rotating in AI Script

    I am getting problem with eps image coordite while rotating in AI Script

    "Problem"? Uh, *what* problem?
    "AI Script"? There is no such thing.
    I'm willing to interpret "cordite" as "coordinate" but you must provide more (a LOT more) information before anyone can volunteer to help you. You are not posting to an automated system that retrieves stock answers from a database. You are asking Real People to help you. (And this is a user-to-user forum, so it's all voluntary as well.)

  • Will the data entered under "Add a description" in iPhoto migrate with the images into Photos?

    Will the data entered under "Add a description" in iPhoto migrate with the images into Photos?

    Thanks for the reply. My particular use of iPhoto is for documents that I have photographed from archives, libraries, and other repositories across the US and Europe. For each one I have added a complete citation and notes. I am so relieved to hear that all my years of work on this will migrate with the new app!

Maybe you are looking for

  • Is there any way to merge 2 video layers to one without exporting?

    Is there any way to merge 2 video layers into one without exporting as a new QuickTime movie? I have tried opening a blank player to copy and paste into, but it always forces it to be layered, even when I change the layer numbers both to zero. I trie

  • Ipad only recognizes one Apple ID

    I have two Apple IDs with the same password. On the iPad, only one is recognized. Every time I try to sign in with the other, and type in the password, the iPad rejects it. Why is this? I have some purchases on one ID, and some on the other, and that

  • In outgoing payment when cheque number issue ..

    Hello Experts, When I enter outgoing payments and enter cheque number in PAYMENT MEANS by selecting MANUAL cheque option and save it. after saving it gives some other Ch Number which is different from what I entered. and place manual cheque number in

  • Zapfdingbats has taken over my text blocks!

    Strange problem and it may be that I am working with an older document from a couple of years ago. When I start a new (empty) text block it ALWAYS is zapfdingbats and I cannot change it to another font except manually going to the font submenu and ch

  • Iphoto 11 scrapbook slideshow

    Im working with the scrapbook slideshow in iphoto 11 and I am having problems with the way the pictures transition.  I have it set one way and if I replace a picture it changes the way they transition.  Is thier anyway to arrange how it transitions f