Do buttons work in a MSO in a PDF folio, version 25?

I created a button within a Scrollable frame, which is part of an MSO.  The button is a blank frame over text, and it's anchored to that text.  The buttom simply goes to a page in the document.  When I click on the text, nothing happens.   What am I doing wrong?
Thanks

Ok I figured out the issue.  When I Anchor Texted the button, it would move below and to the left of the text I wanted it to be hovering over, so I went to Anchor Options, and under  Custom, I manually changed the X and Y coordinates so the button would appear over the text.  What this had actually done when viewed through the Content Viewer (on desktop and on phone),was move the button somewhere in the middle of the text frame.  I was not able to see that initially because the button had no fill and no stroke, but by putting a fill in there, I was able to see the button in the Content Viewer (in both desktop and phone) in the middle of the text frame.
So my solution was to anchor the button, didn't touch anything in regards to placement, kept it left aligned, and typed text into the button.

Similar Messages

  • Interactive PDF–buttons working in preview but not in PDF

    I have a series of buttons that reveal hidden graphics. One of those hidden graphics is a background layer, in a separate layer, that should appear when a button is clicked. It is showing up, but in front of all other content, even though the layer is in the background. I have nothing else on the background layer. Also, the preview in InDesign shows this working properly, it's the exported Interactive PDF that is having problems. Any suggstions?

    Show/hide buttons can let you show and hide graphics which have been themselves turned into buttons. But in InDesign, they cannot control the visibility of layers. I think that's because of the way buttons are handled in the PDF file. I think the buttons themselves are seen as a separate layer above the "content" of the PDF.
    You can change layer visiblity with buttons but not in InDesign. You have to do it in Acrobat.
    Create your layers in InDesign. Export as a PDF but in the Export Adobe PDF dialog box, you must select Acrobat 6 compatibility and check Create Acrobat Layers. This takes InDesign layers and makes them PDF layers which you can work with in Acrobat.
    You can either create the buttons in InDesign or in Acrobat, but controlling layer visibility isn't an available action in InDesign. So you'll need to change their action WITHIN ACROBAT.
    In Acrobat, you can choose View > Navigation Panels > Layers. You can turn the eyes on and off to control visibility like in InDesign. Then set the layer visibility the way you want the first button to set and set the action for the first button to be Set Layer Visibility. When you click Add. It sets the visibility to the current state. Repeat the process for the second button.
    In InDesign CS5, to export buttons you'll need to choose File > Export > Adobe PDF (Interactive). Check Acrobat Layers.

  • Menu button works on pc but not on tablet and mobile

    Hi! I've made a desktop site and I've published it. Everything works on a pc browser but into tablet and mobile, there is a button on a menu that doesn't work..the link to the rest of the site doesn't start. Maybe because that link goes to a part of the site that is too heavy (the structure under that button goes to 30 different pages)?

    This is the url:
    http://www.babylove2000.com/
    If you try to visit the site by tablet or mobile, you cannot enter in the section 'MARCHI' trough the correspective button. The other buttons work correctly.
    Thanks,
    Marianna

  • I updated to new 3.6.6 version now my browser does not work at all just gives me an untitled tab. neither bookmarks or google button work .

    Updated to new version 3.6.6 now browswer doesn't work. Just gives me a untitled tab. Bookmarks nor google button work either.
    == This happened ==
    Every time Firefox opened
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; StarBand Version 4.0.0.2; SearchToolbar 1.1; .NET CLR 2.0.50727; StarBand Version 4.0.0.2; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; StarBand Version 4.0.0.2)

    On my previous post I said:
    "When upgraded to FF 3.6.6, due to Norton 360 v.4, everything froze.
    My solution was to downgrade to FF 3.6.4, because with that version i had no problems, and now again everything works fine.
    Not the best solution but it is better than downgrading to FF 3.5.x as I saw many users did."
    Now I want to add that, after running FF 3.6.4 for 3 days, i got again the security warning to upgrade to FF 3.6.6, so I did.
    Now am running FF 3.6.6, and even with Norton, everything works fine, no bugging, freezing, refreshing, blank pages...
    I can't figure out why the problem still persist for other users. Now maybe it is not due to Norton any more?

  • How do I make a submit button work on a mobile oriented page?

    How do I make a submit button work on a mobile oriented page?  I have the .html file and the .data file (and one other kind), but it just spins and spins and spins when I try to send the form in (for an absence).  I'd like it to work on all devices.  Help?

    HTML forms don't do anything.  You need a form processing script to gather and process form data.  Which server-side scripts does your web hosting plan support -- php, asp, asp.net, perl?  This will determine which scripts you can use with your form.
    Nancy O.

  • Why doesn't the "back" button work all the time in Safari?

    Why doesn't the "back" button work all the time in Safari?

    thanks for the reply. You prompted me to check and I realised it wasn't installed on my test laptop and opening in Microsoft Reader. I've installed it now and it works.
    My next challenge is to prevent the mailto: command opening Microsoft Mail instead of Outlook, but I guess every user will have a different default.
    Thank you

  • How can I get ThinkVantage button working again? (after a full HD rebuild)

    WindowsXP Pro, ThinkPad T60   (2007-F4G / UT0F4UK)
    Hi
    How do I get my Thinkvantage button working again?
    Background:
    I had a virus attack and as a precaution I zero-ed my ENTIRE hard disk (using KillDisk). I have managed to re-install most things, including I now have an icon on the taskbar called "Launch Lenovo ThinkVantage Toolbox". However I would prefer it to be fired up by my pressing the (blue) ThinkVantage button at the top of my keyboard.
    I have refused point blank to pay the (outrageous) price of GBP 40.00 for Lenovo to send me a CD with Windows etc on it, but have managed (eventually) to rebuild the entire disk driver by driver until the ThinkVantage Toolbox thing (version 6.0.5449.31) could take over and bring my drivers up to date when I Update my system.
    (It's just that they may have gone in incorrectly??)
    Is there something I should have done during installation.
    Ship

    Hi Ship,
    1. Install these for thinkvantage button:- 
    http://www-307.ibm.com/pc/support/site.wss/MIGR-62850.html
    http://www-307.ibm.com/pc/support/site.wss/MIGR-68000.html
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • How to make buttons work in Interactive Adobe Forms

    Hi Experts,
    I am new to interactive form. Though i have worked in normal/non-Interactive form, i do not know how to make buttons work in interactive adobe forms using ABAP  (I don't know JAVA). Can any one help me out and walk me through to how to code in ABAP to make buttons work.
    Kind Regards,
    Sharat.

    Please refer to my earlier post ... You will get an idea
    Please refer to the below thread for detail solution
    Sample Interactive form example ?....urgent...
    Cheers
    Satya

  • When I try to use the Submit Form button on the Interactive PDF I created (IN Design CS6) I get this message. "There is no value in form field 'Program.' Please put in it before proceeding. What can I do to fix this and make the Submit button work?

    When I try to use the Submit Form button on the Interactive PDF I created (In Design CS6), I get this message:
    There is no value in form field "Program." Please put in it before proceeding.
    How can I fix this and make the Submit Form button work?

    Are you running modified software on your phone?  This error seems to be common if the firmware has been modified and you're trying to restore the phone again. 

  • Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the

    Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the features on the left side.

    Hi Nealeh
    Thanks i think I got it working of a fashion.
    Except the replace colour, does not seem to end up with the colour I picked using the picker tool. Its as though it hads not replaced the colour but blended in the desired colour with the old incorrect colour!
    Buy trial and error picking not the right colour but close - which when mixed with the existing colour is close.
    Sorry I can't post the pictures as the Lingerie Mfg, has me under non disclosure.
    The scenario is:-  say a blonded mainly tanned model a high cut [at the hips] corsette style basque, with an ultra low bra line.
    Our dear model, has just come back from St Barts with a fabulous Tan, and equally striking bold Tan lines!.
    So we have great tanned legs, then the 'porcelain white band' where her swimsuit was.
    Likewise we have a tanned face, and arms, shoulders etc and a great tan on the top of the cleavage, then it stops, white band to the top of the ultralow cut bra line of the basque.
    She must have lived in like the most conservative bikini on the planet [50's style], for 2 weeks!
    Had she had a normal skimpy bikini on, no problem!
    If i don't solve it, she will get fired!
    Not a lack of interest in your post, but I was out, and tried to log in to this site; which I could do, on my iPad Air / 5 [whatever its the new one]. And tried to 'sign in' - but it just hung at the
    "Join Adobe Community" adobe sign in splash screen! with he little whell spinning around continuously!!!
    I have Safari on this iPad. Guess that is all it runs.
    So technology is not my friend today!

  • Email Submit button works in Acrobat but not Reader

    I have a form with an email submit button.  When those who have Adobe Reader click on the Submit button, nothing happens.  For the users with Acrobat, the submit button works as designed. The users all have the latest version of Reader, Java and Flash.  When the Acrobat users click the button a box appears asking them to select Desktop or Internet email.  Once they make a selection, the form is sent.  When the Reader users click the button nothing happens.  I'm sure there must be a setting somewhere that I need to adjust.  Can you help me?

    Hi Susan,
    I appreciate we have meandered through this, but bear with us...
    Here is a screen shot of a regular button set up to return the completed form as a PDF.
    Now if you deploy this form WITHOUT Reader Enabling the form, then users with Reader will see this warning:
    However before you deploy the form open it in Acrobat and go to the Advanced menu (in version 9) and select "Extend features in Acrobat Reader" and save the form with an amended name. Then send this new "Reader extended" form out to the users with Reader and they will be able to return the completed PDF.
    Without seeing the actual form it is difficult to work out how the submit button is set up.
    Hope that helps,
    Niall

  • Buttons work in PDF but not in SWF export

    I have setup two buttons (A and B for the purpose of this explanation). I have it setup so that when button A is clicked, button B (which is actuall an image that has been converted into a button) is displayed. When you click on button B, it hides. Button B is setup to hide in PDF for initial view.
    This allows me to have a reader click on several headers to display different images. It works great in PDF, but it doesn't work at all in SWF. I am using CS4.
    Any suggestions why it doesn't work?
    Also, if there is a better way to do this, please let me know.
    Thank you very much,
    Fernando

    Show/Hide buttons is PDF-only feature, it´s not supported in exported SWFs.
    Only thing you can do is upgrade to CS5/CS5.5, then you will have Multistate Objects in use, with them you can do that same thing (and much more actually)

  • Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

    Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

    Sounds like you need to contact skype.

  • How to make the print, email button work in PDF output

    Hello,
    I'm using LC  Designer ES2 to create a xdp form with print, email and httpSubmit  button. Then using LC server to generatePDF output, binding with xml  dynamically. But after that I got the static pdf file and none of the  button work,
    I really need help on how to make it work. Any configuration, plug-in....
    Thanks,

    Hi,
    This is solved by note 1281208.
    Thanks,
    Edited by: Zhijie Kong on May 24, 2011 6:06 PM

  • PDF Documents with Functional Buttons - Works for IE and FireFox but not for Chrome and Safari

    To all,
    Good morning.  Our institution developed a PDF document with functional buttons for printing and e-mailing.  When the document is viewed via Internet Explorer and Firefox, the functional buttons work as expected.  However if the document is viewed via Chrome and Safari, the functional buttons do not work.  The workaround for those who are using Chrome and Safari, the PDF document needs to be saved to their local drive before the functional buttons work.
    Has anyone experienced this issue before?  If yes, what was your solution other than the workaround.
    Thanks.
    Babylon5

    Here's how to configure your browser to run Adobe Reader: http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html

Maybe you are looking for

  • Getting values from checkboxes and emailing

    I have several checkboxes name="area[]" the user can check as many as they like. To get the value in php I used $f_area = $_REQUEST['area'] ; and if I want to print out the values I say echo $f_area[0]; echo $f_area[1]; echo $f_area[2]; The problem o

  • How to block the usage of reversed billing document for future

    Hello, A billing document that we reversed earlier was printed later. Billing document type is S1 and output type assigned to it is RD00. We don't want them the users to print the document that was reversed or cancelled. How can we make this document

  • BDC program or standard function module to change data in PFCG TCode.

    Gurus, I have programatically change the validity date of SAP security role (TCode PFCG). Are there any standard function module available for this ? If not then does PFCG supports update vida BDC programming ? Regards, Rajesh.

  • Audio don't work and lighted red light

    I am having a problem that is leaving worried me. Mine iMac MC309BZ/A, simply stopped to function the sound. I verified and the red light is lighted in the output of audio. The stranger is that, aproximadamente the 7 hours before, I assisted a film a

  • How input fields should come one below other

    Hi,       I want to create an application in webdynpro.My requirement is to develop a personal detail form like name date of berth qualification, date of joining etc. So for that I need to create several input field,LABEL and at last one button (GO).