Do carry cases for Macbook Pro 17" exist?

Having purchased two Pro 17" models I wanted carry cases to house/transport them. Apple Store offered 30 choices - chose LeBag Pro 17 as it was on offer. It duly arrives but the Mac doesn't fit. I call customer services who tell me there is a known problem as new MacBook is 10th of an inch bigger than any previous models. I ask if they can swap for another suitable product and they claim they don't stock any - inspite of listing 30 on the site!! I query this and they don't have an answer. So does anyone know of a bag that will carry a 17"model safely?

I’ve been purchasing and reviewing Bags for the MacBook Pro since March and I can attest to the quality, fit and finish of the Italian designs by Tucano. From their plush suede sleeve with display protector, to the “his” or “her” bags for general-purpose carry, these offerings are among the finest bags I’ve seen. In any event, here a few examples for you to see.
Tucano Alba Case - Medium (Midnight Brown)
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wo/6.RSLID?mco=B 67AB864&nplm=TJ523ZM%2FA
Tucano Alba Case - Medium (Ice White)
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wo/6.RSLID?mco=B 688CFE5&nplm=TJ524ZM%2FA
Tucano Microfiber Sleeve - Large (Gray)
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wo/6.RSLID?mco=9 F832F64&nplm=TJ531ZM%2FA
Regards,
MBP-15"/2.16/7200/W8612...   Mac OS X (10.4.7)   G4 Tower (OS 9/10), Dell 620 WorkStation (XP Pro), Gateway P4 (XP Home)

Similar Messages

  • I want to get a hard case for my macpro.. Is this a hard case or silicon? Speck 13" SeeThru Satin Case for MacBook Pro and MacBook

    I want to get a hard case for my macpro.. Is this a hard case or silicon? Speck 13" SeeThru Satin Case for MacBook Pro and MacBook. Says hard cse but then easy to grip...anyone have one?

    description directly from the website: "Form-fitting hard-shell protection with a smooth, grippy, soft-touch feel."
    https://www.speckproducts.com/seethru-satin-macbook-pro-case-13-black.html

  • ZeroShock sleeve case for MacBook Pro is available...

    In case anyone is looking for one, the ZeroShock sleeve case fitted for MacBook Pro is available at:
    http://shinza.com/productinfo.php?productsid=57
    Although the manufacturer is Japanese, the product is apparently in inventory and shipped from their California warehouse.
    I have ordered, but not yet received.
    Enjoy.

    Ya the Biolithic is perfect for that application. I got one while my MBP was in for repairs so it's never been used. It comes with a screen protector, laptop bag, and peripherals bag. I can do $35 ($7 cheaper than if you bought from Biolithic) shipped, let me know if you're interested.
    Thanks,
    Jacob
    [email protected]

  • Cases For Macbook Pro 17"

    So I'm going to be getting my Macbook Pro here in the next day or so and I was looking around at the Apple store for a case. Are there any ones you would recommend. It seems like the cases are mostly for the 15" ones or whatever. I can't seem to find a 17" case. If you wouldn't mind helping me out and maybe posting a link to it that'd be very helpful. Thanks.

    I carry my MBP 17 in a Timbuk2 Track Day Pack. The bag is well made, fairly streamlined and compact, feels comfortable after wearing for several hours, and provides good protection with the MBP in its own compartment.
    Timbuk2's website doesn't specifically mention the 17-inch MacBook Pro (I think they last updated the site when the 15 inch version came out), but a 17-incher fits fine with even some room to spare. I've been very happy with mine and I've tried many, many bags.
    http://www.timbuk2.com/tb2/retail/catalog.htm?categoryId=2&skusetId=122
    You can see some better pictures here:
    http://www.zappos.com/n/bs?q=timbuk2track+daypack

  • Trying to buy a protective case for MacBook Pro MD314B/A 13.3"

    Hi
    It's my first message on here so hope someone can help me.  I've been an Apple user for three years now and absolutely love all of their products and currently have a MacBook Air, iPad 2 and iPhone 5.
    I am trying to buy a protective cover/case for a friends son who is getting a MacBook Pro MD314B/A for his birthday but I'm having a lot of trouble trying to find one for that particular model, in all my searches (pretty exhaustive so far) all I seem to find are ones for the model A1278 none seem to be coming up for the MD314B/A model that I am wanting.
    I only have that to go by as that is all I have been given by his mum who's pretty computer and Apple savvy so I presume it's the correct information, I just can't understand why I can't find one as I it was a doddle when I found a cover for my MacBook Air.
    I know it is the 2011 model of MacBook Pro and really don't want to guess and order a wrong cover and disappoint someone on their birthday.
    I hope someone can throw some light on how to make sure I find the right one, obviously I can't check on the MacBook itself as it is all boxed up ready for the big day.
    Many thanks to you all

    Then you want to post in the respective forums, this one is devoted to Mac Pro (tower) not notebooks.
    Place that would be most likely to have accessories, upgrades too: http://www.macsales.com
    MacBook Pro 
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os
    http://www.apple.com/support/macbookpro

  • Custom Case for Macbook Pro 15 Retina

         I have been looking for a place where I can create a custom hard physical case for a 15 inch macbook pro with retina display.  In my searchings I have only found custom skins and decals.  Does anybody know where I can create a custom plastic (or something like that) case for a macbook pro.  I DO NOT WANT TO GET A SKIN OR DECAL, BUT AN ACTUAL CASE.

    Hi  Macsaregreat I found a company that does them the link is http://www.mrnutcase.com/en-GB/personalised-macbook-cover/ it is an actual hard plastic case for the top and bottom, I love mine came really quick as well.
    Hope that helps

  • Speck See-Thru case for MacBook Pro with Retina Display 15 inch

    Hi, I recently purchased the Speck See-Thru case for the MacBook Pro Retina. The case seems to fit very snugly and requires some degree of force to remove. The top half of the case proves to be more difficult than the bottom half. Is it normal that it takes some force to pop off the tabs of the case? I am probably over worrying but just want to make sure. Thanks

    I have a Speck see-thru for mine and yes, they fit quite snugly. Probably to prevent a "rattling" feeling that would feel even worse. As time goes by and you inevitably have to take it off every so often to clean underneath, the snugness goes away.
    Yes, in spite your best efforts, dust somehow finds its way in there and gathers in the corners which soon becomes unbearable and off it has to come. Guess that's the downside of transparency.   Maybe next time I'll get an opaque black model....

  • Hardshell Case for Macbook Pro

    Does anybody use hardshell cases such as Techshell or Speck with any keyboard covers? Are there any heat build-up issues? I heard that Macbook Pro vents hot air from keyboard area upward. Are there any problems covering keyboards with protective cover all the time? I'm thinking about getting one of these hardshell cases to protect my MBP from dust, scratches, etc to use along with the keyboard cover which I always leave it on. I'm especially curious about case from Techshell since their hardshell cases don't have vent holes on the bottom... Any comments will help!
    Thanks,

    I have the Techshell case with an iSkin keyboard cover. I keep those on the majority of the time (for internet browsing, playing iTunes, word processing, other light tasks) and have no issues with heat. However, it is the middle of winter where I live and ambient temps are about 65*F, so keep this in mind for the following numbers. My processors are currently at 39*C, with fans set at minimum (2000rpm) and the case/keyboard cover on; my computer has been on for about 3 hours.
    The processors jump up to around 50-60*C when using Photoshop and other more intensive programs for a decent amount of time, but even then it's still fine. I only take the bottom of the Techshell off when I'm in Bootcamp and planning on playing 3D-intensive games for a few hours, because the shell does slow down the dissipation of heat enough to be noticeable when gaming. I also crank the fans up to around 3500 rpm and put the computer on a stand to give it some airflow around the bottom; CPU stays under 80*C, GPU around 60-70*C, with this setup--compare this to an over 80*C CPU and GPU with fans running at full blast--6000rpm--if I try keeping the bottom shell on while playing games. I keep the keyboard cover on full-time; it doesn't seem to affect much and when I peel it back, the keyboard is usually fairly cool.
    I highly recommend the Techshell; it has yet to scratch the aluminum casing even though I often remove the bottom shell (very easy after you get the hang of it). And it has definitely saved the aluminum from a few dents.

  • Suggested carry case for MB Pro 15"

    Just picked up a MB PRo 15" a couple of weeks ago. I am looking for a case that I can carry it in that will protect it. I would also like the case to accommodate my iPad and a couple of Pelican 1010 Micro cases for some of the various network adapters that I need to keep with me. I have found a lot of the "sleeves" that do little more than server as a slip cover. Will need to have room for the chargers for both MB Pro, iPad and iPhone.

    I like the bags from WaterField (American-made in SF). Innovative, good looking, and well made bags. I like this sleeve with D-rings and a flap, but they have larger bags too.
    http://www.sfbags.com/products/sleevecases/sleevecases.htm
    Your kit looks like its around 8 lbs of Apple gear before "network adapters". Sounds like you might need wheels.

  • Hard case vs Rubberized hard case for Macbook Pro?

    I'm looking at cases for my MBP 13" and was wondering which is prefereable - hard or rubberized? Also, are there any particular models that you all reccommend?
    As for keyboard skins, which is the best (affordable) one? I type fast & hard and want to be sure my keys are protected. Thank you!    

    Cases of any sort hinder the MPB's cooling requirements. Get whatever you want but don't be surprised when it runs hot.
    My Powerbook withstood over a decade of daily typing. The keys are fine. Just don't spill anything on it.

  • The Ultimate Case for Macbook Pro 17

    I have just received my Zero Halliburton aluminium case for my MBP 17. All I can say is.....get one !!! What a perfect fit and match and the quality is the best.
    Heres the link where I got mine and they shipped from US to UK by Fedex, no customs/VAT duties...and the customer service at luggage source was excellent. Immediately replied to emails etc
    The model is the DZ7 by the way. I called the ONLY distributor in the UK, Harrods, and they have no stock (due to revised airline security and a demand for robust cases)...
    I thoroughly recommend The Luggage Source.
    http://www.luggagesource.com/IBS/SimpleCat/Shelf/ASP/Hierarchy/0301.html

    Well the restrictions have already been eased on BA & Virgin for luggage en route to the US. No longer we need to hand in the laptops for hold so it is not anymore the ultimate case , not everyone wants to walk around with a rather flashy briefcase !

  • Speck Case for Macbook Pro Worth It?

    I just ordered the black seethru mbp case and was wondering if any of you enjoy it as much the reviews say it.  The real question i wanted to ask was since i always have it on my desk most of the time don't actually take it anywhere either, is the case still worth buying.  it was only $30 on amazon.  let me know because from what i'm reading it is.  i just thought maybe i wasted $30 since i don't actually move it too often away from the desk lol
    thanks

    Yes, in my opinion you wasted $30. In the first place, the case doesn't offer any real protection against bumps and dings; all it prevents is superficial scratches. In the second place, if you don't transport your computer, it doesn't need protection against anything except spills on your desk, and the case won't help at all with those. And in the third place, the case will impair the machine's radiative cooling ability to some degree; that will be most noticeable if you use the MBP for gaming or other very demanding operations.

  • Case for MB Pro(Retina)?

    Is there any  Speck 15" SeeThru Satin Case for MacBook Pro(Retina) to come?
    cheers

    https://www.speckproducts.com/macbook-pro-retina
    Best,
    Clinton

  • Clear cover for macbook pro retenia 13"?

    Hi! I am looking for a clear cover/case for my Macbook Pro retenia 13". I was looking for something like invishield... a stick on application. Something that will not make my mac feel bulky.
    Any ideas?
    Thanks,
    Elliot

    This is what you should get:
    Link is there: http://store.apple.com/us/product/HB367ZM/A/speck-13-smartshell-case-for-macbook -pro-with-retina-display?fnode=50
    Hope this help!

  • Carrying case for my laptop and MOTU Traveler?

    I bought my MOTU Traveler for the portability. Does anyone know of a good, protective carrying case for my MacBook Pro and my MOTU?

    I have the same gear. I just use the Incase neoprene zipbags. (from the apple store, about $30 each.) I got the 17" laptop case to fit my MOTU Traveler. Works great for me.
    PowerBook G4 1.67 2GB   Mac OS X (10.4.5)   Logic 7.2 / MOTU Traveler / RME Octamic-D / Tascam US-2400
    PowerBook G4 1.67 2GB   Mac OS X (10.4.5)   Logic 7.2 / MOTU Traveler / RME Octamic-D / Tascam US-2400

Maybe you are looking for

  • OBIEE 11g opmnctl services cannot start (ping failed in ready callback)

    Hi, The BI server is up and running The platform is Linux, searching forums it's due to /etc/hosts and it is defined as 127.0.0.1 localhost.localdomain localhost 127.0.0.1 <servername>.<domain> <servername> All OPMN services cannot start with error m

  • How to change the classpath in rmiregistry

    I am storing remote object stubs in an RMI registry as part of my application. When I try to bind my objects to the rmiregistry started by the kxs process on port 1099, I get class def not found errors because that rmiregistry does not have my classe

  • Pdf file - BLOB

    Hello All, To store a pdf file in a BLOB column. create table test id number primary key, docs BLOB create or replace directory doc_loc as 'c:\test'; insert into tkctsf15t values(1,empty_blob()) returning docs into dest_loc; dbms_lob.open(src_loc,DBM

  • Work flow for Idoc

    Hi Experts,       I want to create a workflow for my program which reads data from flatfile and validates if the data is correct or wrong. I want to send an email by workflow when ever the data has error.      Can you please tell me the steps to crea

  • Two spaces after a period

    Where would I modifiy my CSS to allow for the appearance of two literal spaces after each period in a paragraph. If you are typing body text, Dreamweaver appears to assume you only meant one space between sentences.