DO document flow after TO automatic PGI

Hello Professionals,
I was trying to create a billing doc using auto generated DO from a SO.
I created the SO and automatically the DO was created . Next I  create the TO with automatic PGI.
That was done as WMS TO status was completed shown in the document flow for DO.
In the doc flow I could not see the PGI status.
I clicked PGI  button at the initial screen of the Change DO transaction.
Error message says : "Goods issue has already been posted for delivery"
I would like to clarify is it normal not to see PGI status in the doc flow?
regards
John

hi,
i think so you cannot see the PGI status in document flow.
you can only see the another two documents
1. confirmation of service document
2. TO document (optional) if WMS is there in picture.
3. other wise in delivery document - PGI - push button will be greyed.
hope this clears your issue.
balajia

Similar Messages

  • Trace document flow after perform overclosure GR for reservation using MB1C

    Hi,
    Can i know how can i trace the material document or batch ID for certain material after finished the overclosure GR using MB1C of reservation?
    How it going to impact the following reservation requirement QTY?
    Thanks.

    no anwser

  • Problems with document flowing after placing a movie inline

    I'm trying to place a movie inline and have the contents surrounding it reflow, instead when the movie is placed it overlaps all of the contents above it.
    I'm placing a movie using the following code:
    paragraph.insertionPoints[-1].place(File("c:\\users\\kurt\\desktop\\movie\\test.flv"));
    And this is the resulting behaviour:
    The odd part is that when I tested this against blank templates I had these results, which are the result I was hoping for. The surrounding paragraphs simply reflow to accomodate the movie.
    Any ideas on why the other document isn't reflowing to the placed movie?

    Just to make it a bit easier to refer to anchored object you could probably use
    paragraph.insertionPoints[-1].words[0].allPageItems[0].anchoredObjectSettings.anchorYoffset = 10;
    Not the best but unlikely to fail and easy.
    If you were inserting an oval or the like you would just use.
    myOval = paragraph.insertionPoints[-1].ovals.add();
    myOval.anchoredObjectSettings.anchorYoffset = 10;
    but you can't do that with placed images

  • Outbound delivery document flow is not updated after LT0G

    Hello Gurus,
    after executing LT0G Returd to stock from delivery, a document flow of outbound delivery is not updated. Still an OvrllPickStatus remains = C Fully picked and OverallWMStatus = C WM trsf ord confirmd. This though the goods result to be returned correctly from 916 into stock.. What can be the reason for this malfunctioning?
    Jari

    Many thank for your feedback. The transaction LT0G is executed succefully and a destination storage bin results a correct quantity. Anyway I checked SM13 and a log is empty.
    The notes you mentioned seemed very promising, but unfortunately they are not relevant as a release in where I am working is SAP ECC 6.0 SAPKH60013.
    I am still trying to find some possible other notes but without a success so far.
    Jari

  • After completion of GR(MIGO) delivey document flow was not updated.

    We have to move the stock from PlantA to PlantB . Purchase order and deliveries and PGI has been created and stock is picked out of PlantA . For that delivey goods reciept also completed, when i checked in Purchase order history system showing GR has been completed. but in delivey document flow system showing upto GI document. GR document was not updated.
      When i checked in MB5T stock is showing under *Display purchase orders with delivery completed too*
    Thanks in advance****
    Edited by: RAVI Y on Feb 18, 2009 7:10 AM
    Edited by: RAVI Y on Feb 18, 2009 7:28 AM

    Dear Ravi,
    How can we check  GR (MIGO) is completed with reference to outbound delivey or PO?
    Regards
    Ravi
    Edited by: RAVI Y on Feb 18, 2009 9:55 AM
    Edited by: RAVI Y on Feb 18, 2009 9:56 AM

  • No document flow updated in Service Order regarding MM flow i.e. PR, PO, GR

    Hello,
    On creating a service order in CRM, the purchase requisition is created automatically in R/3 for the spare parts entered.
    But this PR information is not getting updated in the service order's document flow in CRM.
    I analysed the flow and found that PR gets successfully created and sends back the document flow data to CRM inbound queue.
    The BDoc type involved is CRM_SRV_XTN.
    In it's Extended part, there is a field called ORDERADM_H_GUID which is correctly filled in the BAPIMTCS structure in R/3 which is converted to probably XML format through macro MOVE_CASTING and sent to CRM inbound queue (function module BAPI_CRM_SAVE).
    However, on debugging the respective inbound queue in CRM, I noticed that the field ORDERADM_H_GUID value is not the same as filled in R/3 but some CONSTANT value like 00230023002300560023002300230023 in all the cases.
    Also, FYI, the fieldu2019s value in R3 after conversion looks like as following u2013
    #########################0000000000 ########䣴Ώ삷#耀諣뢮########     48F4038FC0B70093E10080008AE3B8AE
    While in CRM i.e. FM BAPI_CRM_SAVE it looks as follows u2013
    #########################0000000000 ########################     48F4038FC0B70093E10080008AE3B8AE
    So there I feel that the value what is sent from R/3 is not the same as recieved in CRM, on XML conversion.
    Please advise what could be the reason for this anomaly.
    Thanks and regards,
    Manish

    unfortunately document flow in PS is not like in SD
    only in ECP there is a limited possibility
    you can see the line item report and activate the relationship browser which will give the details of the documents related to that posting
    other than that nothing

  • Problem in document flow

    experts
    after creating invoice and then i released to accounting and accounting document is
    generated.
    but in the document flow sales order num, delv num, pciking num, pgi num and invoice num is
    comming but accounting num is missing.
    it is not updated in the document flow.
    what would be the reason.

    Go to VF02, key in the billing document and click on green flag.  If the system says "Accounting document not generated", then go to VOFA select your billing type and execute. There check for the field AcctDetermProc.,  KOFI00 is assigned.
    If there is any Account determination error, you have to check your Settings in VKOA
    thanks
    G. Lakshmipathi

  • Document flow not updated?

    I have created a inter company Schedule agreement . Then supplying plant have done delivery and PGI against this after doing picking and transfer Order .
    Now I am trying to do MIGO at receiving plant. While trying to save it's giving an warning message ''Delivery flow for delivery cannot be update'' .
    1. Please expalin why document flow is not updated?
    2. What I should do for updating the document flow?
    Please advise.
    Thanks

    Thanks Warwick. But can you please explain the logic of this message.
    Suppose I need document flow to be updated then what I can do.
    Please advise.
    thanks

  • Picking request in document flow

    Hello,
    1 ) When I'am creating an outbound delivery ( with ref to sales order ) and when I see the document flow, there is a document  called "picking request "  which I can see.. I need to know where is this coming from ? Further I cannot display the document.
    2) What is the relevance of picking confirmation indicator (in non WM scenarios ) which  exists at shipping point configuration  . What picking confirmation means !
    regards
    Pamela

    Hi,
    Relevence of Picking Confermation :
    If Picking Confirmation is Checked :  Then you can't do PGI(Post Good Issue) without picking the materials.
    How to Pic the Materials :
    On the Delivery Overview Screen(VLO2N).Under Picking Tab You will find  the field  " pic Quantity".We need to pic the required number goods either from Plant or from warehouse depend on the requirement.
    If you dont have batch number or warehouse ,then  directly enter the quantity in the " pic Quantity" tab.
    After Filling the required quantity in the " pic Quantity" field come back from that screen and select the button "Post Good Issue" which specifies that the number of goods you entered in pic quantity tab are leaving the company.
    Thanks.

  • Technical link in Document flow

    Hi Gurus,
    The Service Order created in the IC Web Client has the GUID of the document in the Document flow. How is it possible to eliminate this GUID from the document flow while creating the document.
    Regards,
    Madhu.

    Hi Fandi,
        i read ur query while searching  solution for my current request which is  little bit same as ur requirment ,
    i tried for ur mail id but it's not in ur business card.i Hope, i ll get some help from ur side regarding my request
    which is
    As Is Process
    1) Existing work flow will be triggered when ever the new vendor is going to be created or changed.
    2) Work flow had facility to attach the w9 form automatically at present .
    3) After attaching the w9 form it will go for approval process.
    To be Process
    1) After completion of Approval process from the work flow we need to fetch the W9(Attached ) form Automatically.
    2) After W9 form is fetched it needs to be electronically attached to Vendor master as a permanent document when a vendor is created or changed .
    After all approval process i need to fetch the document from workflow and i need to attach the perticular form in vendor master(xk01) .
    thanks and regards
    devraj singh

  • Sales order document flow and delivery document flow are not in sunc

    Hi ,
    whan I look at the Sales order document flow  there are lot of line items rejected with specific reason , but for the same line items already delivery and PGI in place . When we try to do the invoice it shows error , it can't be invoiced because line items in sales order are rejected .
    Ideally in business when delivery and PGi created for the sales order , it should not allow the line item to reject . system should look at follow on documents in place . Reverse process should follow .
    Pls provide solution to stop item rejection when follow on delivery document in place .
    thanks and regards.
    Sunil Tripathy

    Hi,
    Goto the T.Code "VOV7".
    Select your item category.
    Details.
    Maintain the Completion rule as "A(Item is completed with the first reference)".
    Save.
    If you do this after the follow on document is created,the item is completed and you cannot reject the item.
    For your second question,
    Goto the T.Code "VTLA".
    Select your valid combination.
    Click on item.Select your item category.Details.
    There is a check box called as "Update document flow".Tick that one.
    Save.
    Regards,
    Krishna.

  • Proforma invoice number is not in the document flow of the order.

    Hi all,
    I have a doubt , if i create an proforma invoice based on order, and after that i create delivery and billing, i cannot able to see the  proforma invoice in the document flow of the particular order.   pls guide me on this
    Thanks all
    Kumi

    Hi,
    Goto VTLA, and check the  UPDATE DOCUMENT FLOW in the  copy control
    If it is already set , then directly from sales order you can find the Proforma invoice .
    Goto the sales order in VA02 and enter into the overscreen and from there check the document flow ( F5), now you can see the Proforma invoices.
    regards,
    santosh

  • Confirmation of service in the document flow, where it comes from?

    Dear all,
    I found a confirmation of service after I picking and posting goods issue, from the document flow.
    I just wondering, where it comes from? Or, how can I configure it on or off for display?
    (This is a standard ERP system, should not involve in the CRM module)
    Thanks,
    Edited by: Peng Li on Apr 29, 2008 10:04 AM
    Edited by: Peng Li on Apr 29, 2008 10:38 AM

    Hi Peng,
    This usually happens for inbound deliveries usually happens when a movement type is not found for the relevant item. Please check in the delivery item if a movement type is maintained.
    Another possibility is that the material is a non-stock (service) material type for which goods movement are not relevant. Check the material type from the material master.
    Regards
    Nikhilesh

  • Delivery document flow show as a Archived,

    Dear Experts,
    My some of delivery document show in document flow as a archived, I want to know, Why delivery document archived,
    I also want to not list of archived delivery document,
    Can anybody give me t.code for list of delivery document archived,
    Regards:
    Happy

    Hi,
    Are these delivery actually archived by archiving job? Is there any subsequent document after the delivery?
    Technically, if an delivery doesn't exist in LIKP table, but it exist in VBFA table, it will show "archived" in document flow.
    As of why the delivery doesn't exist in LIKP, there could be two possibilities:
    -  it's deleted by archiving job.
    - for unknown reason, it's gone.
    To know why it's gone, it's necessary to reproduce the issue. If you can reproduce, please raise a message to SAP support.
    What you need to do:
    - If this delivery is really archived by your archivng job, you should also archive the preceding sales document.
    - If this delivery is not supposed to be archived, but misisng, you need ot delete this dummy entry from VBFA table, and then recreate delivery.
    To get a list of this kind of archived document, there is no standard report or transaction to do that. You need to write your own report to do that. As mentioned above, technically, if delivery exist in VBFA but doesn't exist in LIKP, it will be displayed like that. You may selecting VBFA and LIKP tables to get your list.
    Regards,
    Harry

  • Document flow of Inbound Delivery

    Dear Gurus,
    We have upgraded to support pack SAPKH60018 from SAPKH60010.
    Earlier the process for goods receipt was followed as described below
    1. Purchase order
    2. Inbound Delivery
    3. GR in to Blocked stock against Inbound Delivery (mvmt type 103)
    3. Release GR blocked stock (mvmt type 105)
    Now after upgrading the support pack when GR blocked stock is made against the Inbound Delivery system is not updating the Document number in the document flow and PGR button is not disabled though 103 mvmt type document is made through migo.
    System is also not allowing to make the Release GR block stock through MIGO and prompting to use Inbound Delivery Dialog instead.
    Request for immediate assitance in regard to this issue.
    Regards
    Danish Alam.

    With the support pack in case if material is serialized for such plant you can post goods receipt only in VL32N which would happen only during 105 mvt type and you cannot post goods receipt using MIGO.

Maybe you are looking for