Do employee ID get imported into SRM when ECC HR org trasfer via ALE

Hi All,
We are implimenting SAP SRM 7.00 EHP1 which will integrate with out existing ECC system. We are planning to import SAP HR organization structer to SAP SRM system via ALE message type HRMA_ABA.
My doubts:
1. Do the employee ID will imported into SRM throgh via ALE message type HRMA_ABA ?
2. Do the empoyee will created as a SRM user automatically(USER_GEN is for manuall creation) when imported via ALE ?
   - if not, how can I create a employee ID as SRM user automatically ?
   - if yes, what whould be password of the employee ID when it will transfer via ALE ?
3. We are planning to use Portal independent access for SRM 7.0. We will use NWBC for access SRM. If the    SRM user will create authomatically, how can I assign role(PFCG role) to the emplyee ID ?
Thanks,
BR,
Jennifer

yes you can.. go though below docs
Note 312090 - Integration HR - EBP/CRM and
https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000310782007E and
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f04782bd-8c01-2c10-b8ab-edd4e9d34cb7&overridelayout=true

Similar Messages

I have Iphoto '09, version 8.1.2 (424). I am having an identical problem. All my pictures are imported into Iphoto when I downloaded them from my camera. Until recently, I thought that the pictures were actually saved in the library. Since I need to cr

I have Iphoto '09, version 8.1.2 (424). I am having an identical problem. All my pictures are imported into Iphoto when I downloaded them from my camera. Until recently, I thought that the pictures were actually saved in the library. Since I need to crop my pictures for the web, and Iphoto doesn't do that, I purchased Photoshop Elements to do that. To my surprise, when I try to get a picture from Iphoto to Photoshop, it can't be done. That was when I realized, after wasting a lot of time, that the photos are not in the Iphoto library.
I started naming the pictures on Iphoto so I had a recognizable file name to open on Photoshop. Couldn't find it. I looked in the Backup folder and the Transfer software folder (I have a Nikon camera), and the names I entered in the Iphoto display, could not be found.
When I am trying to upload a photo to the web, I get the Finder folder showing with an active folder called "Photos" under "Media", which only displays Iphoto and PhotoBooth. This is a folder name that I cannot find in my HD anywhere when I look for it. If I edit a picture with Photoshop, I am not going to save it back to Iphoto (not sure whether it will work properly). How do I get my folder of edited photos to show when I want to upload a picture to the web?
Where (the name of the folder) do I find the pictures I see displayed on the Iphoto library, including any name changes, keywords added, and so on?

See my response to your other post.

How do I get signed into Icloud when it says my apple id is valid but not an icloud acct?

How do I get signed into Icloud when it says my apple id is valid but not an icloud acct?

You will have to sign in to I cloud on any of the iOS device with version 5 or above once with your Apple Id to use your Apple Id as I cloud account. So if you have an iPhone iPad or iPod touch with iOS 5 or later.
On your iOS device go to settings > I cloud and sign in and you should be able to use your Apple Id as an icloud Id.

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip nmed 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved th

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip named 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved the project, the actual video content of 0002.MTS to 0005.MTS was missing(source clips are still there but they were playing and working as part of that 0001.MTS timeline clip before). Those parts of the 0001.MTS clip in the timeline were Danger Striped and can be relinked but now have no edits anymore. The edits are apparently only linked with the original 0001.MTS source clip but extend beyond the actual range of the actual source clip. At the time I thought it was weird that premiere displayed the whole string of clips as one (with one name and no breaks) but it all works in the original project file but cannot be transferred to another location without multiple clips showing Danger Stripes.I need to move it and preserve the dozens of motion and opacity edits linked to the apparently oversized timeline clip. HELP!! any ideas?
I did not nest any clips or sequences, premiere just seemed to combine the clips under one name when I moved them to timeline.
I am using CS5.

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip named 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved the project, the actual video content of 0002.MTS to 0005.MTS was missing(source clips are still there but they were playing and working as part of that 0001.MTS timeline clip before). Those parts of the 0001.MTS clip in the timeline were Danger Striped and can be relinked but now have no edits anymore. The edits are apparently only linked with the original 0001.MTS source clip but extend beyond the actual range of the actual source clip. At the time I thought it was weird that premiere displayed the whole string of clips as one (with one name and no breaks) but it all works in the original project file but cannot be transferred to another location without multiple clips showing Danger Stripes.I need to move it and preserve the dozens of motion and opacity edits linked to the apparently oversized timeline clip. HELP!! any ideas?
I did not nest any clips or sequences, premiere just seemed to combine the clips under one name when I moved them to timeline.
I am using CS5.

Videos shot on my iPhone 3GS aren't getting imported into iPhoto

Videos I've shot on my iPhone 3GS aren't importing into iPhoto - but the photos are. Noticed this a few weeks ago, believe it occurred as a result of my migration from my old MBP to my new one in mid Jan of this year. Did a rebuild of iPhoto, killed the iPod Photo Cache, to no avail. I had been noticing an issue during the sync process, toward the end, I'd get some message that the "iPhone file 'iPhone' can't be found. Googled and saw that I should kill the iPod Photo cache and turn off "manually manage music and videos." This fixed the "file iPhone not found" issue. I killed all the photos and videos in my camera roll (none show up when I select iPhone in the iPhoto window - so a remaining corrupted photo isn't the issue) and then took a photo and video. The photo imports but not the video. Ideas?
Also, another question, If I go back to manually managing music and videos, then go back to the iPhoto tab in iTunes and select which albums from iPhoto to sync back to my iPhone, is it possible to sync videos (originally shot on my iPhone) back to my iPhone? I want to create an album in iPhoto titled "iPhone Videos."

Thanks for your reply, Graham. I actually solved it last night after 3 hours of fiddling with it. Cleared the photos out of my iPhone, cleaned up and reorganized my photos in iPhoto (deleted & recreated albums), deselected and reselected "manually manage music and videos" in iTunes, deleted iPod Photo Cache (again), rebuilt my iPhoto database and something out of this mix worked.
Something interesting happened when I opened iTunes (w/ iPhone docked) - it asked me to select my photo library (or something to that effect). When I selected "iPhoto Library" it gave me a dialog box saying this isn't the the library that was being synced (not the exact words, but close). I went ahead with it. The weird thing is that the library I selected is my only one - the one I've always used, so not sure what's up with that. Anyway, something worked. Photos and videos are all in the right place. Videos are also now syncing to iPhoto from my iPhone.

Which client does the Integration imports get imported into?

In all of the documentation it just says to import the appropriate imports, but into which client should they be imported, 000 or in our case 800 (IDES version of BW/BI 7) which is the client we will be connecting to BOE?
Thanks!
Ryan S.

Bashir-
Thanks for the reply. My question is regarding the transports that need to be imported into your R/3, BW, ERP system so that it can connect with BOE. The transports that are in the /Transports directory when the integration kit is unzipped. I haven't seen any documentation on which client on my BW system these transports should be imported into. Should it be 000 as they are cross-client type of things or do the transports need to be imported to the client you will be connecting to BOE?
Ryan

My image keeps on having quality loss when it gets imported into iMovie!

I'm having a problem with iMovie. I'm stying to import an HD image for use in an intro. The image was made in Photoshop. It has a gradient in the background. When I drag it into iMovie, it looks weird. I have 2 links below. The top one is how it is supposed to look. The bottom one, is how it looks in iMovie. How can I fix this?
http://i342.photobucket.com/albums/o415/basstone97/2j3fkus.png
http://i342.photobucket.com/albums/o415/basstone97/Picture1-2.png
I'm not worried about the size, I know how to export it as HD, but the quality is REALLY bad, and I can't have that. Any help?
P.S. I'm planning on uploading it to youtube.
Thanks,
-Matt

you are working with some very special material.. concerning video making and compression:
your logo (nice artwork!) contains grey gradients..
grey is a difficult color, when you have to mix it out of R G B.. (=grey is not a 'bright black', but a color in video...)
and you have these gradients.. imagine to build a circle with 8pin LEGO-bricks.. that gets.. 'steppy'
I made a test:
http://www.youtube.com/watch?v=4brblWLAS7c
shows the low-quality video.. indeed, 'steps'..
http://www.youtube.com/watch?v=4brblWLAS7c&hd=1
shows the HQ-version..
imho, the HQ version is acceptable, keeping in mind that this is a huge video, streaming thru a thin wire.. ;)))
I dare to say, it doesn't get any better..

Keyword tags not being imported into Organizer when doing Save As

I've got quite a number of pictures in the Organizer, and find the keyword searching invaluable.
However... When I open a file containing keywords in the main editor, and save as, it offers the choice "Include in the Organizer" which is ticked by default. This brings the new version of the image into the organizer, but the keywords don't appear. They are still in the source .psd or .jpeg, going back into the editor and doing File | File info... shows that they are there.
I got round it by saving with "Include in the Organizer" unchecked, but it doesn't remember the setting of this - it always switches back on. This keeps the file out of the Organizer so at least you can use Ctrl+Shift+G to import which will take the keyword tags.
I guess there are two questions here:
1. Is it possible to get the Save As to put the keywords as well as the image into the Organizer?
2. Failing that, is there a way to turn off the "Include in the Organizer" check box?
I've searched the web, messages in this forum, and the FAQ by John R. Ellis and haven't been able to turn up any clues. Hope someone can help or advise :-)
Regards,
Duncan

Hi,
Thanks for the reply.
How are you opening the files into the Editor. Are you in the Organizer and you select a photo and the Ctrl-I (or menu command) to open the editor? Or do you open the file from the Editor directly, searching for it among your folders?
I'm opening the files from the Organizer using Ctrl+I.
What version of PSE?
I'm using PSE7 with the latest updates applied.
What file type are you trying to save the photo as? Please confirm that the originals are .jpg and not RAW.
I'm using .jpg and .psd, using Save As with the same filetype. e.g. open dsc1017.jpg save it as dsc1017_modified.jpg
Regards,
Duncan

Can't Canon raw pics get imported into iPhoto easily?

I bought a new Canon T5i and took some great shots of my kids in Raw format, supposedly the best way to shoot. Nobody told me that importing them to my Macbook Air would be such trouble. I've connected the camera to my Mac (OS 10.6.8) with iPhoto 9.2.3 and yet iPhoto won't import my .cr2 files. It's killing me. Please help. This shouldn't be so difficult, right?

Since every single RAW is different you must verify that your specific RAW is suppoprted for your OS and your version of iPhoto since you are years behind on OS upgrades you porbalby have no support for the latest RAW formats
here is the OS X 10.6 RAW support list - http://support.apple.com/kb/HT3825?viewlocale=en_US&locale=en_US - I do not see the T5i on it -- it is supported under Mt Lion - you need to upgrade you OS
LN

Getting data into a JSF application by posting it via http

(My apologies if there is a thread for this topic - I am not sure what to search for to find if one already exists)
I have 2 applications - the first is a JSF application into which the user logs in, and accesses various tools. The second is a swing app into which the user logs in and accesses various other tools. The logins are universal - one user, one login, two applications. I am providing a link in the swing app to launch the jsf app. I would like the swing app to pass the user identification when launching the JSF session/browser so the user isn't required to type the info again.
(I am guessing I can use a JSP call to bridge the two - something that pulls off the id, and plugs it into the session bean? Just not sure how to do that or if there is a better way)
Many thanks in advance for any assistance!!!

Hi,
thank you for your answers:-)
In conclusion the result is:
1) There is no "direct" way to read POST-Parameter in WebDynPro ABAP
=> You have to write a wrapper in BSP or an ICF - HTTP_REQUEST_HANDLER
(A ABAP-Class that implements the Interface "IF_HTTP_EXTENSION"
that reads the POST-Parameter-Value and transfers the value into a reachable localtion for WebDynPro-Abap.
2) For parsing the XML-Data I can use for example STRANS tcode or Simple Transformations
3) For transfering the Data between the BSP / the Request-Handler and WebDynPro for ABAP, I can use for example SharedMemory, Shared Objects.
Regards
Steffen
Edited by: Steffen Spahr on Jul 19, 2011 8:35 AM
Edited by: Steffen Spahr on Jul 19, 2011 8:55 AM

How can I get an audio notification when someone is contacting me via facetime?

I cannot find any setting that turns on an audio notification when one of my contacts is 'calling' me via facetime. I have an ipad mini and have missed calls because I was unaware someone was trying to reach me. The sound is turned on and volume is up on my mini when this happened. Where is the setting to turn on the 'ringer' when someone is 'calling' me using facetime?
thanks

Settings>Notifications>FaceTime>Ringtone. Select a sound in there.

Capturing with iMovie and importing into fce 4

Hi, everytime I try to capture mini dv footage from my Panasonic camcorder using final cut express, the transfer/capture crashes.
However, capturing using iMovie 08 gives me no problems at all.
Before I spend more time looking into the errors, if I capture using iMovie 08 and then import that into fce 4, am I losing any audio / video quality? I read somewhere that iMovie works off raw dv files - is this what would get imported into fce?
Note: I would import the iMovie project into fce and not be exporting first from iMovie and then importing into fce.
thanks

My video is on mini-DV. The camera I used to record was a panasonic ag-dvx100 PAL. I am using DV-PAL easy setup. I am playing back with a panasonic nv-ds30 camcorder (I rented the other one).
I have now managed to get past the dropped frames - that seemed to have been the test tape. I am now using a different tape, the actual tape i used for the footage. Now everytime I capture (using either mark in/out or capture now) the capture stops with a locating timecode and then breaks. I can't seem to capture it all in one go. This scene when I shot it was a single scene so there were no stops/pauses during the recording.
There seemed to be some discussion on this in the thread (http://discussions.apple.com/thread.jspa?messageID=4183209#4183209) but that was a different camera.
any help would be great.

Global objects imported into dynamic libs

Hi
This might be more of a linker question.
I've noticed that when I have things like statics/globals/inlines in a static lib, then they also get imported into dynamic libs that also use them. This causes problems since there's no dependency rule in my makefiles for this (since the dynamic lib does not depend on the static lib source files). Here's a tiny example.
a.h:
#include <string>
class a
public:
static std::string s;
a.cpp:
#include "a.h"
std::string a::s = std::string("Hello");
build "liba.a"
CC -c -O2 -I. -o a.o a.cpp
CC -xar -o liba.a a.o
b.h:
void foo();
b.cpp:
#include "a.h"
#include <iostream>
void foo()
std::cout << " foo() " << a::s << std::endl;
return;
build "libb.so":
CC -c -O2 -KPIC -I. -o b.o b.cpp
CC -R/usr/lib -G -h libb.so.1 -o libb.so.1.0.0 b.o -L. -la
Now here comes the problem, libb.so contains a copy of the a::s string
paulf> nm -C libb.so | grep a::s
[78] | 69280| 4|OBJT |GLOB |0 |19 |a::s
Now, if I edit a.cpp and change the string from "Hello" to "Goodbye", then if I run make for liba.a, it gets rebuilt, but if I run make for libb.so, it doesn't (since it doesn't depend on a.cpp).
But...
paulf> strings liba.a | grep Good
�]�Goodbye
and
strings libb.so
foo()
Hello
Clearly this is not good news. If I link an app with these two libraries, then there are two instances of the same 'a::s', but with different vslues.
Does anyone have a good explanation for why this happens, and how it can be avoided?
A+
Paul

There are at least three things wrong with this picture.
1. The shared library libb.so pulls in liba.a, but the objects in liba were not built with PIC code. The libb library will not actually be shared, since it contains non-relocatable code. For a library to be shared, everything in it must be relocatable.
2. libb.so depends on something not expressed in the dependencies. That seems to be one of your questions. Add liba.a as something libb.so depends on. If liba.a needs to be updated, libb.so will automatically be rebuilt.libb.so: b.cpp liba.a 3. It is seldom a good idea to link a shared library B.so with a static library A.a, if A.a can be independently linked by program parts that use B.so.
3.1. You can get version skew of A.a if a client of B.so gets Aa from a different source. Bits of A.a of different versions might not mix well.
3.2. Different parts of A.a can appear in different shared libaries, which can cause havoc at library init and fini time. That is, during shared library C initialization, you might wind up calling something from A that was in shared library B, which is not yet initialized. Initialization of C is interrupted so as to initialize B so that the function in B can be called. You might now be doing initialization out of order.
If B.so links with library A, and a program that uses B.so also links library A, you should make library A a shared library. You then avoid all the problems listed above.

Excel import into SQL

Hi,
Can anyone help me with this?
I have imported an excel spreadsheet with different tabs into SQL. One of the tables created from one of the tabs is returning "values" and "nulls" . The table contain 126 rows of Data in excel yet a total of 4509 rows were returned 4383 rows are all null. How do i modify the excel file to ensure that the unnecessary "null" cells don't get imported into SQL.
thank you

Hi Stephanie,
you need to check the datatype of your SQL, then your excel datatype must comply on it.
ex. SQL datatype is Float, then your excel values must only contain number, if in case the column is filled with any non numeric character it will give you null values
regards
Fidel

Sony Cybershot M1 / M2 videos don't import into iPhoto6

Hello, I've been using the Sony M1 and now the M2 as my videoblogging camera. I love it because it does both stills and videos well. Since I use iPhoto a fair bit also, I was wondering why the Sony's MPEG4 video doesn't get imported into iPhoto as part of the film roll. I end up having to dig into the memory stick and drag out the videos onto my Mac's desktop.
Is there anyway to get these videos to import into iPhoto 6? Quicktime does play these videos fine.

iPhoto does not support all movie formats nor all codecs. But it's hard to know what the problem is until we know more about the files. Can you move them to the desktop with Image Capture (in your Applications Folder)?
Regards
TD

Do employee ID get imported into SRM when ECC HR org trasfer via ALE

Similar Messages

Maybe you are looking for