Do graphics with two scales exist in pages???

I'm trying to chart two sets that have quite a large difference in values. One of them is total net income for a set of companies, which is in hundreds of millions, the other one is revenue, in tens of millions. I'd like to chart them in the same graph, using two different Y axis...is it possible in pages??
iMac G4 800Mhz, PowerBook G4 1.5 Ghz, iMac G5 17 inch Mac OS X (10.4.7)

dexlar,
you could try a workaround: create two charts, set them to "Fixed on Page" in wrap inspector and put one over the other.
Maybe you need to adjust the properties of one of the charts so that both scales are placed side by side. You should also play with "Gap between sets".
To place the bars of the two charts side by side, add to each chart the number of (blank) rows that exists in the other chart. In one chart add the blank rows at the end, in the other at the beginning to move the bars to one side.
This all could be a tedious job, though, so if you find a solution outside of Pages, you could maybe add the chart as an image.
If this information is useful to you, please mark it as "helpful" or "solved" using the little buttons in the titlebar of this message. Thank you.
PowerBook G4 17", 1GB Mac OS X (10.4.7) iMac G5 20"; iPod 3G, iPod Shuffle, iSight

Similar Messages

Two images on a page, want to number each image. How?

Page layout with two images on a page, other pages have one image. I want to have a number associated with each image. I tried page numbering to no avail. How do I have a sequence number for each image?
I further complicate this; I will make many documents, each document will have about five pages, as I progress, I want the photo numbers to function likek page numbers, across all the documents.
How do I accomplish this?
Rob

Thank you, I am closer to the solution after following your instructions. On the Master pages (Two page spread), I made a text frame adjacent to each of two frames for the images (There will be two images on each document page, thus two frames on each Master Page). They are threaded together and I verified this by View > Show Text Threads.
Since I am not getting the right result, I must have done something wrong. I made numbered List using Paragrach Styles. I could not find "text attribubutes" so I am probably not doing this right. Please note that I have spent 7 hours on this so far, so I am making an effort.
It seems reasonable that this should be done on a Master layout, is this right? So far, the text frame number flow from 1 to 4 across the the Master Page spread. Thus the first two pages are correct. However, when page is added based on the Master it repeats the same flow: 1 though 4. I expect this because that's what the Master shows, However, I want the numbers to continue as I add photos to additional pages.
Thank you for any additional information you are willing to provide.

Will Aperture work with existing iWeb pages and MM galleries from iPhoto?

Now that Aperture is available as an $80 app, I am considering moving from iPhoto to Aperture. If I do, will Aperture work seamlessly with my existing iWeb pages and MM galleries, set up via iWeb and/or iPhoto? The other editing programs I use on occasion are Nikon Capture NX2, and Photoshop Elements. Also, if I want to at time remain in "simple iPhoto" mode while using Aperture, is this possible, or will my life be more complicated for every edit? Thank you!

Slightly disappointed in the dearth of good web page
creating options in Aperture (you'd think they'd be
better, no?). Can I get iWeb and create web pages
using my Aperture photos?
Yes, iWeb can access your Aperture images if you've enabled previous. I tried this and found iWeb's web galleries quite horrid. After experimenting with a variety of options, I settled on customizing Aperture's web galleries and grafting together pages created by the two programs. iWeb works fine for throwing together some top level pages, and you can then hang Aperture web galleries off them as external links. Several folks have posted instructions on how to do this, and one fellow assembled a nice PDF.
Cheers,
Andreas

Designing a marketing postcard with two postcards per page.

Designing a marketing postcard with two postcards per page.
Is there a way to enter text and graphics in postcard number one and have it appear as typed in postcard number two?

Toddr wrote:
Sure - I want to add text and graphics in one section of the document and duplicate that text or graphic in another section without having to copy and paste.
Thanks.
Todd
Toddr,
Create a two-cell table. Type your text into the first cell and in the second cell type =A1
Jerry

Magic Mouse question. I have set this in Preferences by ticking Swipe between pages with one finger and also Swipe between full-screen apps with two fingers, however when I try to do the latter, the 2 finger swipe will take me only to the dashboard and

It's a Magic Mouse question. I have set this up in Preferences by ticking Swipe between pages with one finger and also Swipe between full-screen apps with two fingers, however when I try to do the latter, the 2 finger swipe will take me from the app that I am on to the dashboard only and not to my other open apps.
I also find that Smart zoom only works with some apps, for instance not with Word docs or email.
How can I correct this please?

Just figured out it also does not work with the Mail app.

I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server wher

I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server where the PDFs open fine) I get an error 'There was an error processing a page. Invalid function resource' The other one just doesn't open at all. Can anyone help with this please?

Hello,
Are the pdf linked correctly in the website? Is this a public website? If yes, please post the link here.
~Deepak

Firefox start with two pages. One says welcome to Firefox etc. And the other is my homepage (google). I want to stop the first page. How can I do this??

Firofx (5.0) starts with two pages. One is the welcome to Firofox and also that there are Add-ons available. The other one is my homepage (google). I want to stop the first page. How can I do this?

See these articles for some suggestions:
* https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved

Page with two iviews

Hi all,
I created in portal (portal content) a new page with two iviews. The first iview it is a bsp site with different links (html links). At the moment if I press a link in this iview WAD web template opens, but it open in the same iview and I wish that it opens in other iview. How can I archieve it?
thank you in advance
Erwin

Hi,
I think your requirement is, your have two iviews in a page. In one iview you have a link and on clicking the link you want to load the target application in another iview of the same page. If this is your requirement the follow the following istructions.
a) In the page of the source iview on clicking the link execute a java script function and raise an EPCM event.
Code to raise EPCM event
EPCM.raiseEvent("urn:com.epcf.EPCFProducer", "myAccGetResultsEvent", "ShowResults");
b) In the page of the second iview subscribe that EPCM event.
Code to subscribe the EPCM event.
EPCM.subscribeEvent("urn:com.epcf.EPCFProducer", "myAccGetResultsEvent", eventHandler);
Write a java script function named eventHandler with one argument and call your target application from this javascript function.
For your reference
https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=epcmsubscribeEventraise&adv=false&sortby=cm_rnd_rankvalue
https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=epcmsubscribeEventraise&adv=false&sortby=cm_rnd_rankvalue
Regards
Shanmukha Rao Banisetti

Report with two pages

hi all
I am designing a report which has two pages , i completed first page, i need to insert second page
how to design report with two pages
Thanks in advance
Krish

Hi,
Usually,any report automatically adjusts its page numbers as per the quantity of data that needs to be displayed.However, if your specific requirement is to show certain data on one page and the remaining on another then you can simply insert a group on a valid field.
Following is some information from the Crystal Reports Online Help menu:
New Page After:
- When the End of Section check box is selected, the program inserts a page break after the section.
- The Page Header and Page Footer appear on each page.
- Use New Page After in the Group footer section to print each group on a separate page.
May be, if this is not what you are looking for then please elaborate on the report design/data

In snow leopard, 2 fingers to the left on the mouse went back to the previous page. In Lion, it opens the dashboard. How can i make firefox go back to previous page with two fingers left on the mouse??

In snow leopard, 2 fingers to the left on the mouse went back to the previous page. In Lion, it opens the dashboard. How can i make firefox go back to previous page with two fingers left on the mouse??

Hi,
I don't know of a preference, but have you used ⌘-T in iCal?
Best wishes
John M

Can a graphic span two (facing) pages?

Can a graphic span two (facing) pages? As far as I can tell, it's limited to being on one page or the other, and gets cut off at the margin/edge of page.
I'm pretty sure InDesign does this. Yes, I recognize theirs no comparing the two. I mention it only as a point of reference.

Duplicate the graphic so you have two. Open them in Preview and crop each one appropriately so you have two halves. Save the cropped images and place them in where you want them in your Pages document.

Is it possible to express two y axes on a xy graph with different scale

Is it possible to express two y axes on a xy graph with different scale
I need to program it... Please help me

Hello.
Yes, it is possible to have two different vertical scales on an xy graph. There is no way that I know of to add a scale programmatically, but once you have added it, you can configure the range of it programmatically, as well as assigning a plot to any particular scale. You do this by using an xy-graph property node, with the properties YScale.Minimum, YScale.Minimum, and Plot.YScaleIndex respectively.

Two Master pages with two design pages

Hi All;
I need a help in the below scenario;
- I have two Master pages wid different header title and other information which I required for two different body pages.
I need to assign the 1st master page with all content of first page data (both design pages will display table data).
so the first page display should start with 1st master page and 1st body and after finishing the content of first table..
2nd master and body page starts with the content of 2nd table..
The issue is I am getting one extra page when I am checking design pages
Please let me know your valuable suggestion.. Helpful answer will be highly appreciated !!!
Regards
Devraj
Edited by: Dev on Aug 20, 2010 4:36 PM

HI Otto,
I am also facing similar problem,
I too hv 2 master pages and 2 body pages respectively.
first master page assigned to first body page
and second master page assigned to second body page.
But still i am able to view one extra body page in my design view.
Kindly help.

Cant open firefox on second screen on computer with two screens with two graphics cards.

I have a computer with two screens and two diffrent graphics card. One of them is onboard GC and another one is USB GC. I am running two instances of FF and it works fine with 3.6.20 version. But when I update to the latest version of FF either 5 or 6 this does not work. Even if i try to open one instance of FF on second screen on USB GC , I cant see anything> i have to move it to the main screen to see the FF window and will not work on the extended screen. I am using windows 7 pro 32 bit and the screen resolution is set to 1280x1024 on both the screens.
Can you please help.
Thanks.
Regards
PJ

Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

How I can enable "turn the page" with two fingers

my problem is I want to enable the option to "turn the page with two fingers" to serve everywhere (Google Chrome, Finder, etc) but the problem is notserved with two fingers, serves only the option to turn pages if I put three fingers
Help!
All this happens in my macbook with OS X Lion

I had already tried that, but does not work, just when I put "three fingers" work everywhere, but when I put "two fingers" does not work in any place

Do graphics with two scales exist in pages???

Similar Messages

Maybe you are looking for