Do I can create a formula if does cell 1 more then 100 should be a picture in large in another cell?
A
Hi Abraham,
Numbers treats photos as a special kind of fill. We can't really fetch a photo into a cell. With conditional highlighting (Hi Naikosen!) we could reveal an image fill already placed. Here is maybe a screenshot:
I pasted an image into the cell. I made a conditional highlighting rule that if the value of the cell is less than 100 the fill is white. The number has to be in the same cell. I shaped the cell so the number is not intrusive to the image.
quinn
Similar Messages
-
Although I'm connected to my Wi-Fi network my computer keeps "looking for new networks." How can I stop it from doing so when I'm working at home and don't want another network?
You might want to update Safari to 3.12. I would empty the safari cache. (Safari>Empty Cache). Then quit Safari. System Preferences>Network>Show:Airport>TCP/IP. Insert the following into the DNS Servers box;
208.67.222.222
208.67.220.220
then hit apply. Now launch Safari. You should also try powering down modem, router and Mac and power up in 2 minute sequence; modem, router, Mac. -
Can you zoom in more then 100% without using the loop?
If you press the 'Z' key, your photo will zoom to 100%, but is there a way to zoom more then 100%? I know that I can use the loop tool to do that, but I'd prefer to just have my viewer display at 200% instead.
Thanks,
KennyIf you display the image at full screen, then zoom, your image will appear to be way more magnified. Can't say exactly why.
-
My photostream on my iphone shows more then 30 days of photos, however I have recently lost my phone and hadn't set up the icloud on my computer until now. Is there anyway to get all the photos in my photostream on my iphone or just the last 30 days?
If you backed up the iPod before restoring it then restore from that backup. See the restore topic of:
iOS: How to back up
Also, if yoo have that backup you can extract the photos by:
Recover iPhone, iPad or iPod photos from backups with Picturescue
If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer -
How I can check in formula field does Source table has rows count more than zero?
I have 2 tables in data set source: tbl_Quote and tbl_Invoice.
Report should show an Invoice Number. If an invoice isn't issued yet I want display an Order Number instead of Invoice Number.
I'm using a formula field for this purpose.
I tried formulas:
1. IIF (count({tbl_qteInvoice.ID})=0, {tbl_qteQuotes.QuoteID}, {tbl_qteInvoice.ID})
2. IIF (ISNULL({tbl_qteInvoice.ID}), {tbl_qteQuotes.QuoteID}, {tbl_qteInvoice.ID})
But in the report the field is empty. I think this is because of a result of selection request is empty.
What function in Formula Editor I can use to check if a result of selection request is empty?
Thanks.When I used the code:
IF ISNULL({tbl_qteInvoice.ID}) Then {tbl_qteQuotes.QuoteID}
Else {tbl_qteInvoice.ID}
the problem was resolved.
Thanks to Vissu Pangam! -
If I create a smart folder in iPhoto, and then delete it, are the pictures gone?
I am still trying to figure iPhoto out. I just created a "Smart Folder" and it imported some of my photos. I decided to delete that folder. Did that delete the pictures or are they still somewhere else in iPhoto or on my computer? Thanks!
several issues with your question
1 - there is no such thing as a smart folder in iPhoto
2 - folders in iPhoto can not hold photos and it is not possile to import photos into them
3 - there are smart albums - deleting a smart album has no effect on the photos - the "contents" of the smart album are simply pointers to the photos in your library that meet the criteria - deleting the album has no effect on the photos themselves
4 - as the contents of a smart album is the photos that meets the criteria it is no possible to import photo into a smart album
5 - it is helpful to know what version of iPhoto you have
So please ask with correct terms since we can not see you or your computer and can only help based on wha tyou tell us
LN -
Can mrp run consider material availability for more then one plant?
Hı PP Gurus,
My Case:
Material "A" is maintained for plant "X" and "Y" for example. When i execute mrp for material A i have to specify a plant. And the system creates planned orders just considering the quantity in that plant. But i want mrp to see the quantities of both plant.
I mean when i execute mrp the system must consider the quantities for both plant and create planned order or not.
Is there a way to fix it?
Thank you indeed.
Evren TemizYou can use Scope of Planning for this.
Total planning covers the planning of all the materials that are relevant for requirements planning and includes the BOM explosion for materials with a bill of material.
You can use total planning for a single plant or you can use the scope of planning to control whether the total planning run is executed on a multi-plant level
If you have activated MRP with MRP areas, you can also combine MRP areas in the scope of planning as an alternative to plants.
With the help of the scope of planning, you can control whether the total planning run is to be carried out:
1. For one plant (as previously without scope of planning)
2. For several plants
3. For an MRP area
4. For several MRP areas
You define the scope of planning for the total planning run in Customizing for MRP, in the IMG activity Scope of planning for total planning run .
You can carry out total planning for a scope of planning online or as a background job. The planning run must always be started with parallel processing.
You can use the scope of planning for total planning in Material Requirements Planning, Master Production Scheduling and Long-Term Planning.
Please refer to the below links -
http://help.sap.com/saphelp_46c/helpdata/en/35/b0e95c87a62488e10000009b38f9b7/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/d7/5c9366f47811d1a6ba0000e83235d4/frameset.htm
Hope this helps you. -
ITunes can't "see" my external devices any more. What should I do?
My external devices used to sync just fine. Suddenly, iTunes doesn't even know they exist. How do I get them to reconnect again? I can't sync anything as things stand right now and it's very frustrating.
Hello there, MarciaBee.
The following Knowledge Base article offers up some great steps for troubleshooting your iPhone not being seen in iTunes:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Hi,mike,is cirrus down again? I can't connect now.and I have more then 10000 connection
What am I supposed to do?
developer keys can be obtained for free by anyone. there is no incentive to steal a developer key from an existing application, except to abuse it and cause a disruption to the service or for the legitimate developer to be blocked.
unfortunately the connections (in this case) are coming from hundreds of thousands of different end-users. there is no one (or small number) of IP addresses to block, unless i was somehow able to block (in this case) "all of China", which would also block lots of other legitimate applications.
in this case it doesn't look like the developer key has been taken by a hacker. it looks like an application developer deployed an application that makes connections to the service from popular web pages, where the application mostly doesn't need the connection and where the end-users are connecting very rapidly. very few P2P operations appeared to happen with this application (when it was not blocked) even though there were hundreds-of-thousands of concurrent connections. the average duration of the connection to Cirrus in this application is less than 3 minutes. -
Why can't I send text messages to more then one recipients from the UK?
I have an iPhone 6 with the latest operating system. I travel to the UK frequently. When I attempt to send a text message to multiple recipients it comes back as undeliverable. However I am able to send textx to single recipients. This only happens in the UK That I know of.
It's ask the person who has that phone - that's where the problem is.
-
Does anyone can create a random guest account more than 10 ?
Hi, Experts
I'm currently using ISE 1.1.1 to demonstration with my customer. In the sponsor page, does anyone can create the random guest to be more than 10 accounts at a time ?
I have try to create with 20 accounts then get the error as below,
Internal error encountered. Please contact administrator or help desk.
However the random accounts are created only 10 accounts.
Since the system said that it can create from 1 up to 10,000 accounts.
Thanks,
Pongsatorn ManeesudHi,
I just tested this and I was able to generate 20 accounts successfully. Do you have patch 1 installed on your ISE node? Also what group is your sponsor account mapped to? I used an account that is mapped to the SponsorAllAccount group. -
I need a tool which i can create 3d subs
i need a tool which i can create 3d subs.
Does anyone know anything about thisMaybe this?
http://tritonsubs.com -
Hi All,
I need to create a pricing formula ( through txn VOFM ) but i have a doubt regarding type of formula that i should use. In txn VOFM there are following type of conditions based upon which we can create a formula:
1) Scale Base
2) Condition Base Value
3) Condition Value
4) Structure of Grp Key
5) Rounding Rules
Can you please provide some documentation or explanation on these five types so that i can choose according to my requirement.
It's Urgent.
Thanks in Advance
~Jasmeetclosing this thread
-
WHERE clause creating a join for two or more tables
The CS3 Dreamweaver book says that the WHERE clause can
create a join for two or more tables. The join was created, but the
data is repeating. I have searched the web and this forum and have
not found the answer.
My Master page filters the recordset by Style No and when a
customer clicks on a particular style, it sends him to the Detail
page. All the records are showing from all tables on the detail
page from the Dynamic List, except they are showing multiple times
(ex. Size table has 4 sizes and Color table has 2 colors - my Size
Drop Down list is showing 8 options and my Color Drop Down List is
showing 8 options) I have a Master Page with a recordset pointing
to a Detail Page using the same recordset.
Master page works perfectly.
Master Recordset SQL:
SELECT products.itemID, products.category, products.styleno,
products.name, products.description, products.ourprice,
products.imageTH, products.image, coloroption.color,
sizeoption.size
FROM products, coloroption, sizeoption
WHERE category = 'chefcoats' AND
products.styleno=sizeoption.styleno AND
products.styleno=coloroption.styleno
GROUP BY products.styleno
ORDER BY styleno ASC
The Detail Recordset:
SELECT products.itemID, products.category, products.styleno,
products.name, products.description, products.ourprice,
products.imageTH, products.image, sizeoption.size,
coloroption.color
FROM products, sizeoption, coloroption
WHERE itemID=colname AND products.styleno=sizeoption.styleno
AND products.styleno=coloroption.styleno
I tried using the GROUP BY on the detail page, but then it
only showed one size and color from the dynamic drop down list. I
tried changing the field name "styleno" in the other tables to be
unique, however, I was using the table identifer. I tried using the
JOIN command instead of the WHERE clause and that didn't help
either.
On the detail page, the customer is supposed to click on the
Size box and see sizes XSM - 6XL ONLY ONE TIME. and then be able to
click on the Color option and see White, Black, Red ONE TIME.
Is this possible?
Thank you for giving your time to read this.!
EvieDo you have a link we can look at to see what you are trying
to do?
Dave
"EviePhillips" <[email protected]> wrote in
message
news:[email protected]...
> The CS3 Dreamweaver book says that the WHERE clause can
create a join for
two
> or more tables. The join was created, but the data is
repeating. I have
> searched the web and this forum and have not found the
answer.
>
> My Master page filters the recordset by Style No and
when a customer
clicks on
> a particular style, it sends him to the Detail page. All
the records are
> showing from all tables on the detail page from the
Dynamic List, except
they
> are showing multiple times (ex. Size table has 4 sizes
and Color table has
2
> colors - my Size Drop Down list is showing 8 options and
my Color Drop
Down
> List is showing 8 options) I have a Master Page with a
recordset pointing
to a
> Detail Page using the same recordset.
>
> Master page works perfectly.
> Master Recordset SQL:
> SELECT products.itemID, products.category,
products.styleno,
products.name,
> products.description, products.ourprice,
products.imageTH, products.image,
> coloroption.color, sizeoption.size
> FROM products, coloroption, sizeoption
> WHERE category = 'chefcoats' AND
products.styleno=sizeoption.styleno AND
> products.styleno=coloroption.styleno
> GROUP BY products.styleno
> ORDER BY styleno ASC
>
> The Detail Recordset:
> SELECT products.itemID, products.category,
products.styleno,
products.name,
> products.description, products.ourprice,
products.imageTH, products.image,
> sizeoption.size, coloroption.color
> FROM products, sizeoption, coloroption
> WHERE itemID=colname AND
products.styleno=sizeoption.styleno AND
> products.styleno=coloroption.styleno
>
> I tried using the GROUP BY on the detail page, but then
it only showed
one
> size and color from the dynamic drop down list. I tried
changing the
field
> name "styleno" in the other tables to be unique,
however, I was using the
table
> identifer. I tried using the JOIN command instead of the
WHERE clause and
that
> didn't help either.
>
> On the detail page, the customer is supposed to click on
the Size box and
see
> sizes XSM - 6XL ONLY ONE TIME. and then be able to click
on the Color
option
> and see White, Black, Red ONE TIME.
>
> Is this possible?
>
> Thank you for giving your time to read this.!
> Evie
>
> -
The microphone on my iPod Touch does not work anymore :( what should I do ?????
Hi , my iPod is awsome,but the microphone doesnt work and i dont know what to do also before i did have probleme with my iPod but ive find a way on itunes to fix it !!! And when i talk on memo we can see that it wont get up more then 20 level !!!!
- Make sure the mic hole is unobstructed. It is the little hole on the back side of the iPod by the camera lens.
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
How can we set default value within html:file
Hai, To set default value to text box i use the following code. It works well. <html:text property="modifyserverdesc" value="<%= serverDesc%>" styleClass="text" size="38"/>But for file i use the code <html:file styleClass="file" property="modifyserve
-
I have created a DSO as a staging area and loaded data from the PSA. the PSA contains 63500 records whereas the DSO has only 644 records. my question is the DSO should contain the same number of records which is in the PSA? If so why do i have differ
-
I installed the OWB browser assitant and it said I was successful, but when I log in I get the error below: Versions Oracle Warehouse Builder client 9.0.3.33.0 repository 9.0.3.0.1 Client - Windows 2000 professional ==============Error Text =========
-
Dear Experts Am using below query for my sales and collection report. Is there possibilty to have oustading figure by sales employee FROM OINV T0 INNER JOIN OSLP T1 ON T0.SlpCode = T1.SlpCode WHERE T0.DocDate >=[%0] AND T0.DocDate <=[%1] GROUP BY T1.
-
I have an Audigy LS that works fine as far as playing audio or streaming audio over the Internet, but I can get Audacity to record either steaming audio or line-in audio. If I set audacity to OSS: /dev/dsp, the mixer tool bar doesn't even show up.