Do i connect the time capsule to my bt home hub

I thought that this would be simple, but here I am 2 days later. I have a BT home hub, which I have used a powerline network to extend connection to the other end of the house. I wanted to plug the TC into the output of the powerline, but this did not seem to work, after lots of turning routes on and off. Today tried to wire it directly to the home hub, still no luck. I am not that technical, so any help is greatly appriciated. Thanks in advance.

thank you for the response, yes it was. Also a couple of things, the IPv4 is there, but all the fields around router address are empty. My TC also says that there are 4 warnings, ethernet, internet, and a couple of updates.
I can not see any lights flashing on the ethernet port
thanks

Similar Messages

  • HT1178 can i connect the time capsule to a router?

    i am having problems setting up the time capsule for the first time.  it works when i connect the time capsule to my mac via ethernet cable.  however, i am trying to have it connect to my mac wirelessly.  so i pluget it into my router through the wan port, but it flashes yellow. 

    Flashing amber can mean anything .. it is just an error which you need to find in the airport utility the exact description.
    But I recommend reconnect by ethernet first.
    Setup wireless again.. this time use new name.. short, no spaces pure alphanumeric.. TC24ghz for example.. and different name for 5ghz.. TC5ghz works.
    Lock the wireless channels used particularly for 2.4ghz.. choose out of 1, 6, 11.
    Setup WPA2 Personal security with 8-12 character passkey.. pure alphanumeric.
    Update the TC, and disconnect the ethernet.. but do not move it yet.. with the Mac close by try to connect to the wireless.. if it still fails.. something is wrong in the hardware on one side or the other.
    If you get wireless working, determine if the router or modem you plug into is going to be the main router.. in which case bridge the TC. Or if the TC will be the main router.. setup the TC to connect by dhcp or pppoe depending on the broadband type.

  • Do i have to hardwire connect the Time Capsule to my router?

    do i have to hardwire connect the Time Capsule to my router?
    My plan was to just add it to my wireless network and keep it for security away from my mac and in a completely different part of the house.

    You can but it is a NOT recommended method.. it will be slow and unreliable.

  • Can I hard wire connect the time capsule to my iMac

    I have been told to not use wireless connections when iPhoto library is on external disc. Can I hard wire connect the time capsule external drive.  I have found nothing showing or telling me exactly yes or no. 

    how various devices on the network are connected is of no difference
    ethernet wired or wifi == no difference

  • You must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

    you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

    I tried to answer in your other post.. please stick to one thread ..
    What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default.

  • HT1178 i can't connect the time capsule with my mac using the aiport utility. i want to use the time capsule to make backup for my mac book pro. the time capsule is giving a flashed amber light. please advice me

    the time capsule is giving flashed amber light and i cant connect it to my mac book pro. i want to use it with the time machine to make backup for my mac. please advice me.

    To do the setup, plug it in via ethernet.. do not try to setup over wireless.. Once it is setup you can plug the TC into the network and use wireless.
    Most likely you will use the TC in bridge to an existing modem router.. but we cannot help as you have no details of the network setup.
    I do recommend in the setup of the TC you use SMB type names.. that means, short, no spaces pure alphanumeric.. as later Mac OS do have issues with long names, spaces and that apple shocker, the apostrophe.

  • HT1178 I just bought an Airport Time Capsule. I already have a AirportExtreme for my wireless network for my home. Which would be better; connect the time capsule up to the extreme or use it as the primary base station?

    Is it better to connect my Time Capsule up to my existing wireless network or use the Airport Time Capsule as the base unit and start over again by creating a new network?

    There is no end of answers to this..
    But if you want AC wireless.. assuming you bought a new TC.. and the Extreme is the older N model.. then simply make sure the TC is as close as possible to where wireless AC client will be used.. and connect it back to the main router whichever that is, by ethernet.
    If both are AC then it will make no difference.
    As long as you can connect them both by ethernet and not use wireless extend.. it won't make much difference.
    The worst case is where you use wireless extend and expect high speed but totally lose it because of your bridge link.. if that is the case you wasted your money and you can return the TC and buy a hard disk and plug it into the AE.

  • Connecting the time capsule to a wireless network (university)

    I just purchased my first mac computer, and the time capsule. I am a university student, and my housing has wireless network, so i would need to configure it to that network (which requires registration). When I first opened everything up, I could see the time capsule in the airport utility, but now I cannot. I dont really know where to go from here, because all of the manuals go from being able to detect the time capsule. On top of that how do I connect the wireless to the registration required network? Any help is much appreciated.

    how can I use the time capsule as a "wifi acceptor" to connect with my wireless network, and then boardcasting wifi signal to my devices?
    Unfortunately, this is not possible.
    In order to broadcast a wireless network with Internet access, the Time Capsule must be provided with a wired Ethernet connection at its WAN "O" port.
    Check wtih your Internet Service Provider to see if they have an adapter or other device that will provide a wired Ethernet connection to the Time Capsule.

  • How do i connect my time capsule from outside my home? i dont have static ip

    sorry about my english...
    its been 4 months now and still I am not able to connect my time capsule via internet from outside . i have read enough forums and discussion but i am confused because every discussion has different answer. please anyone can explain me the simplest way to configure my time capsule so i can connect it from other computers. i am using windows 7 64bit os.i am not advance user of networking so please explain me in detail.
    some questions.
    1. is it possible to use time capsule as nas using dynamic ip address?
    2. if yes how and where can i get exact detail about this.
    3. how to connect my time capsule form my iphone,ipad or other computers . connect through ip address or something else?
    4. is it any simple installation way to do this? i heard about bonjour and icloud but dont know how to connect through this.
    please help me
    thank you
    sachin

    i am using windows 7 64bit os.i am not advance user of networking so please explain me in detail.
    Here is your primary issue.. you cannot connect with win7 ..
    Windows only offers SMB protocol which just about every ISP.. all responsible ones ...block..
    Time Capule offers AFP to internet and only AFP.
    You need to use a Mac to connect.. then use BTMM and iCloud as there is no dyndns in the TC anyway. (Actually there is a dyndns but only for apple btmm use...  you cannot access.
    If you want to or have to use windows.. then get a proper vpn router that offers vpn endpoints to windows and has dyndns.. setup the TC in bridge behind the vpn router and access via vpn .. this is the only safe way of connecting using SMB.

  • Connecting time capsule wirelessly to BT home hub

    Help unable to set up time capsule to wirelessly join my BT home hub (original white home hub for use in UK). Goes through all the stages then when restarts can't find airport device. Took it to local genius bar and worked fine there. Is this a problem peculiar to home hubs?

    ESM@ESM, welcome to the discussion area!
    In order to "Join a wireless network", you need to know the exact type of wireless security that your BT Home Hub is using, so you can provide those settings to the Time Capsule. It cannot join your network unless you have the correct settings.
    It would be much easier to configure your Time Capsule to connect to your Home Hub using an ethernet cable. This will still allow you to use your Home Hub wireless network for backups, and you'll also have the option to use ethernet for backups, which will allow you to backup much more quickly. Can you consider that option?

  • Binned BT and want to use Time Capsule instead of BT Home Hub

    This is my first question so please be gentle with me and forgive any errors!
    After a truly horrendous experience with BT (22 calls to them in two weeks to resolve broadband speed of 0.4 mbps and no that's not a typo) I've changed ISP.
    I already had a Time Capsule which previously I've used only as back up facility. Now I have a separate cable modem and want to use the Time Capsule as a router. The cable modem is plugged in to the phone line (with a filter) and there's an ethernet cable connecting it to the Time Capsule.
    I thought I could bin my hated BT Home Hub, but the minute I unplug it, the set up doesn't work.
    So it would seem that my Mac is talking to the Home Hub, that's talking to the TC and that's how I'm getting onto the net. I'm at a loss what I need to do to be able to throw the Home Hub in a skip.
    Would greatly appreciate any advice as this is frying my tiny brain!
    Thanks in advance.
    Macbook Pro, iPad 2, iPhone 4, Time Capsule

    There are some issues here.. if your modem is plugged into the phone line it is adsl not cable modem..
    The TC is not a modem.. it is a router.. you still need a modem to provide connection. Ask your new ISP for what their preferred modem is.. In the UK most ISP use PPPoA method of authenticaiton.. The TC cannot handle that.. they only offer dhcp to an existing router or PPPoE. That means the TC needs to be bridged. If the BT home hub is now running fast though, a new modem is not going to make the connection go faster.

  • Time capsule with a BT home hub

    hello
    i have a time capsule that connects to by BT home hub 2 wireless and while doing a backup it drops the connection to the hub and the router has to be reset- can anyone help me with this problem
    cheers steve

    I had an initial rejection message like you connecting to BT Hub, Mark.
    I used the setup to add to my existing network (BT Hub) and the amber light on the front of the capsule just kept flashing, looking for a network. This was done wirelessly
    So, I reset the capsule to factory settings by pressing the reset button on the back for 5 seconds amber flashes fast. I then restarted my computer and restarted the BT Hub
    I then ran airport utility again. (No ethernet cable is connected, but running wirelessly) When the Time capsule appears in the left sidebar of airport utility and the IP address is picked up in the main window, I then clicked on continue. After naming the capsule and giving it a password, I then clicked on continue. When I got to the next window, I choose the top one 'I have a wireless network and want to add Time Capsule or replace an existing device on my network'
    I then clicked continue and in the next window I chose the second option 'I want Time capsule to wirelessly join my current network'
    In the next following window, your BT Hb will show in the first field, click on wireless security (I chose (WEP 40 BIT preset) and enter your BT Hub wireless key and repeat it into the next field.
    Clicking next will give a summary of what the settings will be updated too.
    When the final window appears, close it and wait for the steady green light appears at the frot of the capsule. Be patient and it will work.
    If you go by the settings similar to mine you should be good to go.

  • I am unable to set up my new Time Capsule with my BT Home Hub - every time i connect the ethernet cable from Wan port to Home Hub, the internet signal drops

    Hi there -
    I've just purchased a new Time Capsule, and would like to set up a small home network with my Laptop, iMac and wireless printer. I'm following the first steps, but as soon as I connect an ethernet cable between the WAN port of the TC and the ethernet port of the HH, my BT internet connection drops out and I have to restart the HH. Upon which point it drops out again. The airport utility can see my TC, and gets as far as me typing in the new network name and setting up a password, but then it can't quite get through to the next stage. All the time it's just flashing amber.
    Please help!

    Setup the TC in bridge mode before you cannot it to the HH.
    Simply do the setup fully in isolation. And do it by ethernet.
    Setup wireless to create a wireless network.
    You can use either same SSID =Wireless name as the HH .. same security same password.
    Or use a different name and setup.. totally up to you.
    Update the TC and then plug it into the HH by ethernet.

  • Can I connect the time capsule to my existing iMac wirelessly?

    I've just bought the airport time capsule. can I connect to my my existing wifi netwiork without an ehternet cable?

    You can but it works really poorly and it is not supported by apple.
    Plug the TC by ethernet into your main router and you can turn off the wireless if you like.
    The exception is if your existing network is running apple router/s then you can use the TC as extend.

  • I want to use the ethernet connection from my new iMac to my Time Capsule.  It seems only the Wifi is seen by either device.  Ive connected the Time Capsule to the iMac.  How can I get the iMac to use the wired connection

    I want to connect my iMac to my Time Capsule using Ethernet.  I have them connected via an Ethernet cable, but only WiFi seems to be working.  How can I specify the Ethernet connection instead of WiFi?  Thanks
    Welked

    Go to preferences, network and see if ethernet is indicated. Be sure it shows a green dot.  Also be sure it is at the top of the list (above WiFi).  If not click on the the wheel at the bottom and set service order.

Maybe you are looking for