Do I Enhancement Package Installation for BI on NW(2004s)

Hi, Guys,
We just finished a new installation of NW(2004s) with aim to use new BI features, especially, the BI Integrated Planning-Planning Modeler and Visual Composer.
During central system installation, we have choson to use EP/EP CORE usage type.
With to check some reference, I doubt the current status of system is missing something to use BI Planning Modeler and Visual Composer.
I wonder if I should apply any enhancement package of NW(2004s) and just in case, where can I check the current stack level in system?

Thanks for the responses from you guys.
I have make clean on this point.  Enhancement package comprises various support packages related to those components you installed.
If listening to sap suggestion, it's best to install all the support package(either ABAP or JAVA).
I just finished the new installation with sp 9 and started to configure BI-JAVA functionalities.
Current situation is fine. I can carry on all the steps stated in Note or guide document.
So, just leave it alone and see how it's going.
Thanks again.

Similar Messages

  • "Enhancement Package Installation" option is missing for CRM 7.0/NW 7.1

    Hi Expert,
    I am trying to install EHP1 on CRM 7.0/NW 7.1. Following the installation guide, I updated the solution manager to SP stack 24, and use MOPZ to download the software packages. But when I create a new MOPZ transaction, there is only "Maintenance" option for the product of CRM, the "Enhancement Package Installation" option is missing. The Maintenance Optimizer works well for other products, such as Netweaver and ERP 6.0.
    Can someone help me? Do I need to apply some notes?
    Thanks,
    Min

    Hello,
    It looks like either your company has not enrolled for the Ramp Up of CRM 7 EHP1.
    If your company is indeed in the Ramp Up, please check in SCPR20 if these BC sets are activated in the listed sequence:
    SOLMAN40_MOPZ_TTYP_SLMO_000
    SOLMAN40_MOPZ_001
    SOLMAN40_MOPZ_SP18
    If one of them has no activation logs or if the date and time of the third one is earlier than the first in the list, then the Maintenance Optimizer BC sets need to be reactivated.
    Best regards,
    Miguel Ariñ

  • Enhancement Package Installation option missing in MOPZ

    Hello gurus,
    We´re faccing with a problem with maintenance optimizer procedure.
    I have an ECC 6.0 system installed with SPS16 and now we need to upgrade it to Eph4.
    When I go to Solution Manager 7.0 Ehp1 (SPS22) to transaction mopz and create a new transaction, in step 2 "Select Files" on "Calculate download files automatically" window, normally two options appear "Maintenance" and "Enhancement Package Installation", but only shows "Maintenance" option. So, for our goal we need the option "Enhancement Package Installation"!
    I already read the snotes 1122966 and 1139493 I take in count the prerequisites for enhancement package option in SMSY.
    Another question, this problem may be related to any matter of contract,restrictions on our own contract with SAP?...
    Can you help us to solve this problem?
    Best regards,
    João Dimas - Portugal

    Hello frmshyam and all of others,
    We already know whats happen... we contacted SAP people and they inform us that is a kind of limitation of the contract agreed by our company and SAP!
    Inclusively we can check that when we try to download some ERP system DVD media directly from marketplace, we don´t see anything, we only see the media DVD´s of solution manager system.
    Thanks anyway for your help.
    Best regards,
    João Dimas - Portugal

  • Enhancement Package Installation option missing

    Hi,
    I've installed the latest suport package stack in a SAP ERP 6.0 system, and now I need to upgrade it to Eph4.
    When I go to mopz and create a new transaction, in step 2 "Select Files" on "Calculate download files automatically" window, normally two options appear "Maintenace" and " Enhancement Package Installation", but now None appear!!!
    I've confirmed that product version is correct, ERP 6.0 not ECC 6.0. I've also installed the latest ST (SAPKITL429).
    Can you help please

    My SSM User is associated with the client S-user in AISUSER. And that S-user has full athorization in the marketplace, is the Super Admin. I Have an RFC for each client, because my SSM is for VARs, so is configured in an multiclient way.
    I can download, files using mopz, but only manually, because no option appear in the automatic window.
    I think is something with the latest SPs, but I've aplient all recent notes, after SP19 and nothing.. oss message is already open, I'll give feedback.
    Thanks anyway.
    Regards

  • Enhancement Package 5 for SAP ERP 6.0 - Webinar Series - Oct-Nov 2011

    Webinar Series: Enhancement Packages for SAP ERP
    Innovation Made easy!
    SAP enhancement packages (EHPs) are optional add-on packages that enable you to selectively install and use new functions without a major release upgrade. Since May 2011 enhancement package 5 for SAP ERP 6.0 is general available. With this latest enhancement package more than 500 business functions are delivered in order to improve or enhance the various SAP ERP application areas, industry solutions and usability.
    Customers running SAP ERP 6.0 can benefit by installing SAP enhancement package 5 and switch on any of the new business functions.
    Get insights and an overview of whatu2019s new with SAP enhancement packages and how innovation is made easy. Join the upcoming webinar session series covering what you need to know about EHPs and activating new functions and the major improvements in SAP ERP Financials, SAP ERP HCM, SAP ERP Operations and the areas of usability and user interfaces.
    In one-hour sessions SAP Experts will introduce the new functions; provide a u201Cliveu201D experience on selected topics and will be available to answer your questions.
    Target group: These webinars are pointed to IT-managers, business managers, business analysts and business process experts.
    Cost: Joining these webinar series is free of charge.
    Language: English
    Dates: Oct 13 to Nov 29, 2011
    Region: Americas
    Topics included
         Enhancement Packages for SAP ERP: Innovation Made Easy - Learn how to do it
         Enhancement Packages for SAP ERP: What is new in SAP ERP Operations?
         Enhancement Packages for SAP ERP: What is new in SAP ERP HCM?
         Enhancement Packages for SAP ERP: What is new in SAP ERP Financials?
         Enhancement Packages for SAP ERP: What is new for User Interface and Usability?
    To register please visit http://www.sap.com/mk/get/ehp

    Hi Partson,
    It is needed to connect this system with solution manager and create stack.xml using
    maintanance optimizer. The main aim of this is to let you know what usage types/ functionalities are to be
    selected from stack.xml.
    It is also needed to download all the required support packs/ addons using maintanance optimizer.
    If you have DVDs containing the same product that matches with stack.xml, you can provide them.
    But the safest way is is to give all the tasks to solution manager , It will create , and download neccesary sps, addons to your
    download basket.
    Thanks and Regards
    Purna

  • AddOn installer for C# in SAP 2004

    Hi,
    I have a question. Is there an AddOn Installer for C# in SAP 2004? Or do I have to write it by myself?
    Regards,
    Hmg

    Hi Szymon,
    You can use B1DE package you can donwload for free from SDN. It will create an installer in Vb.NET but it is very easy to adapt the code to C#.
    Regards
    Trinidad.

  • SAP Catch Weight Management - Business Functions (SAP Enhancement Package 5 for SAP ERP 6.0) - SAP Library

    To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
    You can also go back to the SAP help page.

    the EHP2 is now running on my system:
    For the installation on SAP NetWeaver 7.0:
    FINBASIS 602     CSR0120031469_0027395.PAT
    SEM-BW 602     CSR0120031469_0027396.PAT
    all informations can be found in:
    1045303 - Installation of Enhancement Package 2 on SAP ERP 6.0

  • How active option "Enhancement Package Installation" in MOPZ

    Hi.
    I want install EHP40 from Solution Manager. I read SAP Note 1122966 where it says "You want to import ERP 6.0 Enhancement Packages using the Maintenance Optimizer. The import is supported as of Solution Manager 4.0 Support Package 13."
    The level of Support Package in my Solman is:
    SAP_BASIS     700     0013
    SAP_ABA     700     0013
    PI_BASIS     2005_1_700     0012
    ST-PI     2005_1_700     0004
    SAP_BW     700     0013
    SAP_AP     700     0009
    BBPCRM     500     0009
    CPRXRPM     400     0007
    BI_CONT     703     0003
    ST     400     0013
    ST-A/PI     01I_CRM500     0000
    ST-ICO     150_700     0006
    ST-SER     700_2007_1     0006
    I create in SMSY a SAP system with version Product ERP 2005, but when i go MOPZ, whe i create a new MOPZ transaction the option not appears.
    Can you help me???
    Thank you very much.
    Regards.

    > Thanks for reply, but i implement all the notes of section ST13 & ST14 of SAP Note 1122966 but the problem continues.
    > Any other idea??
    Note 1122966 - Maintenance Optimizer: Notes for Enhancement Packages
    <...>
    The option of installing Enhancement Packages in an ERP 6.0 system is only offered in the Solution Manager Maintenance Optimizer if the systems assigned to the process are assigned to the product version ERP 6.0 or ERP 2005 in the Solution Manager system administration (transaction SMSY).   The product version ECC 6.0 must not be used for the installation of Enhancement Packages. The attached Note 1022072 describes step by step how to change a product version assigned to a system.
    <...>
    Markus

  • SAP America has scheduled Enhancement Package Installation class.

    Hello Everyone,
    ADM327 is a 2 day class.
    This class had not been scheduled for a while but was recently put on the schedule in Chicago on May 17-18.  There are only 2 registered people, myself included.  I would like to encourage a few more people so that the class is not cancelled.
    This would be of interest if several years have passed since you did an upgrade since it uses much the same methodology.
    Regards,
    Pat

    Hello Patricia.
    I think it'll be better if you invite the people in this forum "SAP Enhancement Packages"
    /community [original link is broken]

  • Enhanced Package 3 for FAGL_ACTIVATE_OP

    Hello,
    We need to activate FAGL_ACTIVATE_OP transaction. We are looking for SAP notes and the solution is install EHP3.
    In EHP3 there are a lot of packages that we don't need. Anybody knows what support package do we need to update?
    We thing FI module support packages? Which are they?
    Thanks and Regards.

    Hi Juan,
    just map the Business Function you mentioned to a Technical Usage.
    Based on this information Solution Manager - Maintenance Optimizer will do the rest.
    More information can be found in the Must Know Guide:
    http://service.sap.com/~sapidb/011000358700001166742007E.PDF
    Best regards,
    Christian.

  • Business Functions in SAP Business Suite Foundation - Business Functions (SAP Enhancement Package 5 for SAP ERP 6.0) - SAP Library

    To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
    You can also go back to the SAP help page.

    Hello,
    I tested 2 changes :
    - put entries for wdf.sap.corp in my local hosts file
    - put entries for dummy.nodomain + adjust /etc/resolv.conf
    System start is OK, but access to dbacockpit is still behaving weird.
    The html version fails at the start -
    Impossible to connect to the URL http://vhcalabaci.dummy.nodomain:0/sap/bc/webdynpro/sap/dba_cockpit?<etx>. The server responded with: Can't assign requested address.
    i can go into the sapgui interface for DB02 but most of the interesting menu options are greyed out - so I can't retrieve the info.
    In some of the screens in DB02 I find reference to a server wdflbmd16124 - a DB test connection to this server fails (of course). Tried to enter this name asa alias in the hosts file but that did not solve this issue. On the other hand, abaadm seems to have the correct environment info for the local ASE (since the database starts). Looks some config settings between user env and gui are not in sync.
    But I miss ASE skills to figure out where I need to correct this.
    Mixed feelings about this installation - it looks like the application part will work - but having this confusing setup might still give surprises at later stages.
    So I hope your team works on a clean version of this image and will deploy is soon.
    Regards
    Frank

  • SAPehpi installer  (SAP Enhancement Package Installer)

    Hi,
        Please help me where can I get the SAPehpi installer. I have searched all through the forum, blogs etc... but not able to find where to get the SAPehpi installer.
    thank you

    Hi Bernhard,
                I have the both administrator and the regular user ID, but I m not able to find the place to download the SAPehpi. Can you please help me where is the location for the download in the service market place. As I have searched in the download and installer area too... Either the give me a solution by giving me the installer.
    Please help me by showing me the route.. Please help me with the location for the exe file of the SAPehpi. I did not find it on the DVD too.
    Thank you

  • SAP Enhancement Package Installation

    Hello,
    Next month we are going to be install NW700 - SPS18 & EHP1 SP03, I am clear up to SPS18, but I have lots of questions on EHP1 SP03.
    This is the 1st time I am doing EHP1 installation on NW system.
    Can some one guide us what are the CDu2019s required, how much space will it take?
    Thanks in advance,
    JP Reddy

    > Next month we are going to be install NW700 - SPS18 & EHP1 SP03, I am clear up to SPS18, but I have lots of questions on EHP1 SP03.
    >
    > This is the 1st time I am doing EHP1 installation on NW system.
    >
    > Can some one guide us what are the CDu2019s required, how much space will it take?
    Did you check the obvious guides?
    http://service.sap.com/instguides
    --> SAP NetWeaver
    --> SAP NetWeaver 7.0 (2004s)
    --> SP Stack Guide - SAP NetWeaver 7.0 including EHP1 SPS03
    You must have an installed and configured Solution Manager with maintenance optimizer to generate the necessary .XML file.
    Markus

  • Trial version or Sneak Preview for the SAP NW 7.0 Enhancement Package 2

    Hi,
    Is there any trial version or Sneak Preview available for this version? Could you please share download-able link with me?
    Thanks in Advance,
    Prashant Jagdale

    Yes but that is the Business Suite, and according to [this|SAP Enhancement Package 2 for SAP NetWeaver 7.0], the SAP NW 7.0 Enhancement Package 2 should be availabel now. So hopefully we will get the a developper and/or trial version soon ?
    Regards
    Morten Nielsen

  • Java Add-In Installation for EHP4 ERP system

    Hello!
    we successfully upgraded our SAP ERP system to EHP4 for SAP.
    Our system has only ABAP stack.
    Question
    1) Is it possible to install a Java Add-In instance for the existing EHP4 system?
    2) If yes, can this be done on the same Windows server?
    Thank you very much!

    Specific Requirements
    Take the following specific requirements of the new installation process into consideration:
    - The previous SAPInst installation service Java Add-In in SAP ERP 6.0/SAP NetWeaver
    7.0 was able to add Java usage types such as EPC, or EP, to existing ABAP-only
    systems. This was possible only, if you added AS Java at the same time. The option of a
    Java Add-In installation is not any longer available as of the enhancement package 4 for
    SAP ERP 6.0. Thus, it is not any longer possible, for example, to add EPC and EP
    together with AS Java to an ABAP-only system.
    [SAP Enhancement Package 4 for SAP ERP 6.0|https://websmp201.sap-ag.de/~sapidb/011000358700000772192007E]
    There are many links on SDN discussing ERP EHP 4 dual stack:
    [Re: EHP4 Dual stack;
    [ECC 6.0 - EHP4 - Client Import;
    Hope this helps.
    Thanks,
    Naveed

Maybe you are looking for