Do I get few more CLAD sample papers Except available papers in NI site?

Hello,
i am preparing for CLAD exam, Do I get few more CLAD sample papers Except available papers in NI site?
Is it enough if i gone through Core 1 and core2 videos with some practice?
best regards

If you want more study questions, check out SercoSteveB's blog: The Daily CLAD.
The CLAD should just cover topics found in Core 1 & 2.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

  • CLAD Sample exam

    Hi,
    I'm new to this forum and this is my first post.
    I am a beginner to LabVIEW. Currently preparing for CLAD.
    I'm looking for some sample exams, which i thought would be very helpful before taking up CLAD.
    I came to know from my collegues that there was an online CLAD Sample exam available, which I've been trying to find it but had no luck
    It would be very helpful if someone could please tell me if it has been removed, or provide a link if it still does exist.
    Thanks
    Suchin
    Solved!
    Go to Solution.

    Hi there guys,
    Now I may be missing something, but to the best of my knowledge the CLAD sample papers are still up and running. In fact I was dicussing them in a meeting recently.
    So I ran a search for CLAD exam sample papers, and it was the very first search result.
    http://zone.ni.com/devzone/cda/epd/p/id/5225
    Let me know if I've mis-understood the question. Thanks.
    EDIT:
    Sorry, I to have missed the point here... by 'online' you mean 'interactive'? I hope the link is helpful though. I will get straight back to you if I hear of an interactive test around.
    Rhys
    Applications Engineer
    National Instruments

  • Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

    Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

    ejwoodall wrote:
    It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
    Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
    I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
    The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
    If your machine performs flawlessly, it may be a router issue.
    If your machine has connectivity issues there, it may be a hardware problem with your machine.
    There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
    But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
    In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

  • CLAD sample exams

    Hi, i've got the 2 sample exams, but does anyone have any more exams? Or even some learning material?
    Thanks Stuart

    These are the two official sample exams.  Not sure if these are the ones you have or not.
    https://lumen.ni.com/nicif/us/ekitcladexmprp/content.xhtml
    When I took the CLAD I read through this entire blog.  I found it to be very useful and I definitely got a few more correct because of it.  As well as learned a few useful things for my daily work.
    https://decibel.ni.com/content/blogs/DailyCLAD
    Lukin
    Certified LabVIEW Developer

  • CLAD sample exam 1

    Hi,
    yesterday I had a discussion with some friends and I want to get some independent opinions now :-)
    It concerns this CLAD sample exam question:
    Now lets see, what does the iteration terminal do? From my point of view: it returns a new value at the beginning of each loop iteration and this value tells me how often the loop has already executed (0 during the 1st iteration, 1 during the 2nd and so on). In this case answer a would be correct, right?
    According to the results contained in the sample exam, the correct answer is c.
    But this is only true (hard to write "true", because I think it's kind of odd to put it that way) if you wait until the loop terminates and than check what value was returned last.
    I'm curious about any comments or opinions.
    Regards,
    Thomas

    I would check c too (maybe if even have it, can't remember) , more because I expect it as the expected right answer
    In examines you should always say what your examiner wants to hear, right? Well, most of the time easy to proof in an engineering world
    And that's why the best preperation to a test is a test test, to learn how you have to understand the questions and what are the expected answers, otherwise it would be too simple
    If you are picky answer a  might also be correct because the sentence is written in the past * and the terminal will spite out it's value right at the beginning of the loop when the loop has not (completely) executed.   That's why it is positioned inside on the left side.
    *) I'm not a native English speaker, and grammar in any language hasn't been my favor anyway, so I might be false.
    Message Edited by Henrik Volkers on 03-26-2010 11:48 AM
    Greetings from Germany
    Henrik
    LV since v3.1
    “ground” is a convenient fantasy
    '˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

  • How to get work JavaFX WebViewBrowser sample in debian linux wheezy?

    How to get work JavaFX WebViewBrowser sample in debian linux wheezy
    You may also check latest version of this problem here... 
    The Starting point I have
    Debian wheezy
    java version "1.7.0_40"
    Java(TM) SE Runtime Environment (build 1.7.0_40-b43)
    Java HotSpot(TM) Client VM (build 24.0-b56, mixed mode)
    GTK version: 2.24
    NetBeans 7.3.1
    Certified configuration acording to JavaFX Supported Configurations
    is
    Ubuntu 10.4 +
      gtk2 2.18+
    GTK is OK. do I require ubuntu?
    first try: by  downloading Java SE Downloads - javafx sample
    Let's try it
    zolta@zolta:~/dolgaim/IT/NetBeansProjects/javafx/javafx-samples-2.2.40$ java -jar SwingInterop.jar
    # A fatal error has been detected by the Java Runtime Environment:
    #  SIGILL (0x4) at pc=0x9b6b4c22, pid=21172, tid=2658700144
    # JRE version: Java(TM) SE Runtime Environment (7.0_40-b43) (build 1.7.0_40-b43)
    # Java VM: Java HotSpot(TM) Client VM (24.0-b56 mixed mode linux-x86 )
    # Problematic frame:
    # C  0x9b6b4c22
    # Core dump written. Default location: /home/zolta/dolgaim/IT/NetBeansProjects/javafx/javafx-samples-2.2.40/core or core.21172
    # An error report file with more information is saved as:
    # /tmp/hs_err_pid21172.log
    # If you would like to submit a bug report, please visit:
    #   http://bugreport.sun.com/bugreport/crash.jsp
    # The crash happened outside the Java Virtual Machine in native code.
    # See problematic frame for where to report the bug.
    Terminated
    Let's see what core dump says
    to be continued...

    Gusar wrote:
    We need *a lot* more info than that. Could be something very simple, like the interface being up before starting wifi-menu (netctl doesn't like the interface being up, it'll only start correctly if the interface is down).
    Or it could be something more. In which case, you'll need to start wpa_supplicant manually with debugging enabled:
    wpa_supplicant -i wlp18s0b1 -c <(wpa_passphrase MYSSID passphrase) -d
    Once this says you're connected, open another terminal and start dhcpcd. Or, if wpa_supplicant doesn't manage to connect, post the *entire* output.
    Edit: Ok, you posted more info as I was writing my post. Will look through that, maybe it contains something useful. If not, follow the instructions above.
    Edit2: Nope, nothing about wireless in there, except that the driver loaded.
    It worked!!
    I was looking into the logs and found an authentication failure...my password is very long so I made some mistakes while typing it.
    So this is the solution all the way:
    SOLUTION:
    - No need to install or load any external drivers (all I used was already in the base installation)
    - DISABLE THE HIDDEN NETWORK OPTION IN THE ROUTER (thanks for the heads-up @Gusar)
    - run "# wifi-menu"
         or
           "# wpa_supplicant -i [interface] -c <(wpa_passphrase MYSSID passphrase) -d"
    - run "# dhcpcd [interface]"
    - Good to go!!
    I'm sorry for the trouble guys, and like I imagined, it was really easy and now I see my newbiness hahaha ;D
    Thanks.

  • [svn:bz-4.x] 16147: Fix a few more regression tests on the 4. x branch that were failing when using Spring integration.

    Revision: 16147
    Revision: 16147
    Author:   [email protected]
    Date:     2010-05-17 06:18:38 -0700 (Mon, 17 May 2010)
    Log Message:
    Fix a few more regression tests on the 4.x branch that were failing when using Spring integration.
    Modified Paths:
        blazeds/branches/4.x/qa/apps/qa-regress/WEB-INF/src/runtimeconfig/remoteobjects/ROMessage Destination.java
        blazeds/branches/4.x/qa/apps/qa-regress/WEB-INF/src/runtimeconfig/remoteobjects/RuntimeCo nfigurator.java
        blazeds/branches/4.x/qa/resources/webtier/flex_sdk_4/flex-config.xml

    Well heres my story. I tried kde4 from extra the last 3 weeks and I like it. I have used xfce for the past 3 years, previous to that gnome. Tried kde but never really liked it. Now I am only using workspace, base, mutimedia and graphics.
    Here is what I like.
    1- Dolphin, awesome I have used thunar a while and it is great but I love splitview, and fish for ssh (which has been around a while I know), and the ability to mount other partitions on my hdd with a click no fstab entry or nothin'.
    2-Pretty, I've used xfce with built in compositor an love the snappiness. But I like desktop grid with kde4 and flipswitch. Compiz-fusion is cool but I prefer not to use I'll take what the DE gives. Plasmoid are cool too.
    3- Gwenview is nice too. Use to use gqview, but thumnails are nice.
    Looking forward to or lacking
    1- Keyboard shortcuts, Yes xbindkeys is there but if I have a DE I want it to do it. They just don't work now.
    2- kde4 has windows specific settings, but I can't set the opacity for particular windows , doesn't work.
    3- Ram of course is much higher in kde4, but maybe I'm getting old I just don't care as much.

  • I have 2 ios devices, but one icloud account. Can i get 2x more space to hold settings etc?

    I have 2 ios devices, but one icloud account. Can i get 2x more space to hold settings etc?a
    Iphone 5
    Ipad 4

    "Method Three
    Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
    This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
    I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks

  • So did Apple Retail Stores that sold out Friday get/sell more iPads

    Was wondering if Apple Retail Stores (especially in the Philly area) that sold out their inventory of iPads on Friday night received shipments for the weekend, or did they just go all weekend with no iPads to sell? Are stores getting daily shipments? Think there is a chance they'll get some more on Monday?

    Here in SF they did get a few more units. One nice person posted to CL about the downtown store having several available and no line on Saturday, but I didn't see it in time.
    I asked at the store at the mall here Saturday and they told me to check back Monday morning. I got the 32 3G ATT via ATT website before they ran out, but I currently have and want a 64GB. I'm going to show up at 10AM tomorrow morning.

  • HT1414 IPHONE 3GS Problems. Updated to IOS6 then says There are just a few more steps to take. Press Continue. Once pressed it says connect to itunes. So plugged the cable in and it does nothing and stays on that screen. How can he fix it?

    Hi, My friend has just updated there 3GS to IOS6 and once it's done, 2 screens appear. first one says, Update complete, there are just a few more steps to take. Press continue and another screen comes up with the itunes symbol and the cable and says connect to itunes. Once plugged in, on itunes it reconises the phone and has the loading symbol up, but it doesn't loads anything and can't press anything. Anyone know why and how to resolve this?

    The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
    You're on your own.  Good luck.

  • Alright, so my ipod touch stopped working, but I can still connect it to itunes, but my friend gave me his old nano. I was wondering how I could get my more updated songs from my ipod touch onto the shuffle. My laptop crashed whish had all my new music

    Alright, so my ipod touch stopped working, but I can still connect it to itunes, but my friend gave me his old nano. I was wondering how I could get my more updated songs from my ipod touch onto th nano. My laptop crashed whitch had all my new music, and im afraid if I sync my Ipod touch to the desktop with all my old songs, ill lose all my newer ones which I dont want to happen because I want them on my nano. Im sorry for the confusing topic im just so lost.

    All you have to do is connect your new iPod to the computer that has the library for your old iPod.
    When iTunes comes up, click on your new iPod under Devices.
    At the top of the Summary Page click Music.
    Click Synch Music.
    Do the same thing for Photos, Apps, Movies and so on...
    Now just synch the iPod.

  • I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.

    I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.

    See if exporting them helps:
    Exporting From iPhoto | Apple Support Communities
    Gene

  • I started making a movie and all was well. I added a few more pictures and some sound and played it back. It plays so far and then the pictures break up into colors and then the screen turns green.  The sound continues.

    I am making a movie from still pictures. I used no theme and then started adding pictues. When I played it back, all was well. Then I added a few more pictures and some sound. When I play iot back it plays just so far and then the sound continues, but the screen turns green or the pictures break up into colors.

    Sorry, everyone.  I think I may have figured out what it was all down to...........
    I had left the IDE ribbon cable plugged into my third HDD, with the power cable unplugged.  I did this so as not to endanger my years of work on the third drive, until Windows had setup.  I have in the past, accidentally chosen the wrong partiton to format, so this seemed a good way to avoid it from then on.
    This was not a problem on my old system, but it seems this system doesn't like it.
    I must have left the drive completely unplugged, the times Windows did setup.  Amazing really.  I couldn't see the woods for the trees.
    Anyway, I'm sorry to have bothered everyone with my problem.
    Cheers
    Marcus
    edit :   Sorry Syar2003, I didn't see your reply until I had posted mine.  Many thanks for taking the time to try and help me, it seems as though I may have sorted it now.  I am using IDE drives until I can afford SATA.  But many thanks for the heads-up on the NF4-SATA compliance, I'll be sure to bare that in mind.
    I didn't actually check the NVRAID/IDE ROM version before updating the bios, so I have no idea if the revision was changed when Liveupdate flashed the Bios, I'm afraid.  I didn't know they would be updated at the same time.
    Again, cheers
    Marcus

  • Help me in getting some more powerful authentication....

    I am looking for your help regarding the validation of users in JAVA,mysql , i am looking for some code help .regarding this matter.i have a code which uses cookie to authenticate the users but can you help me in getting some more powerful authentication....

    I'm not sure what you mean by "IP Community list", but here are 3 reference sites for Regular Expressions:
    Regular Expression Tutorial - Learn How to Use Regular Expressions
    http://www.regular-expressions.info/tutorial.html
    Regular Expressions Cheat Sheet by DaveChild
    http://www.cheatography.com/davechild/cheat-sheets/regular-expressions/
    Regular Expressions Quick Reference
    http://www.autohotkey.com/docs/misc/RegEx-QuickRef.htm

  • Functional Global Variable in the CLAD sample Exam

    Hello,
    A question in the CLAD sample exam #2 keeps puzzling me. It's question number 32 about FGVs:
    32. Which is not an important part of creating a Functional Global Variable?
    a. Using Shift Registers to store information
    b. Changing the VI’s execution settings to Reentrant
    c. Setting the VI to inline into calling VIs
    d. Setting the While Loop to stop after one iteration
    The answer given is the following
    32.Correct Answer: B
    Topic: Functional Global Variables
    Justification: It is not necessary to inline functional global variables into their calling VIs. In fact, inlining requires that the subVI be reentrant, which is forbidden for functional global variables.
    Clearly, for an FGV to work properly, the VI must NOT be reentrant. So I would have selected answer B, but the justification seems to clearly point to answer C as well, doesn't it? Is it a typo, a subtlety in the wording? I am stuck on this one!
    Solved!
    Go to Solution.

    Well, inlining requires reentrant.  Therefore, the best answer should technically be C.  This looks like one of those rejected/retired questions since it isn't quite right and/or left up to too much interpretation.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

Maybe you are looking for

  • How to update my valueChanged()?

    Need HELP! I'm trying to write an application which has to show my image files (set of photos) with a text description. The list of image files placed into the JList. So, when I select a file from the JList it shows me an image (everything is OK). Bu

  • Text Line Item to Quality Inspection

    Hallo, Is there a way to have PO Text Line Items posting to Quality inspection by default? regards, Marco

  • Business Area in  BAPI _ ACC _ INVOICE _ RECEIPT _ POST & BAPI_INCOMINGINVO

    Dear Experts I am using this two BAPIs. for Invoice creation BAPI_INCOMINGINVOICE_CREATE for MIRO Invoice BAPI _ ACC _ INVOICE _ RECEIPT _ POST for FB60 invoice creation, In this I am facing Problem to Pass Business area, in BAPI _ ACC _ INVOICE _ RE

  • Problem on idoc filter on - ALE

    Hi all, I'm working with ale, in particular with CLFMAS IDOC. In trx. BD64 we have a filter for this idoc. The problem is that I need to filter the field E10CLFM-objek with a select-option and no with single values? Is it possible? regards, enzo

  • Illustrator CS6 Keyboard Issue

    Only in Illustrator, when I try to type a question mark, instead I get an 'É'... in fact I cannot seem to get the following characters at all: / is é ? is É ' is è " is È [ is ^ { is ¨ ] is ç } is Ç \ is à | is À and there are a few others as well. H