Do I get rebate if I sign 2year contract with ATT and buy iphone 4?

Yes - on the sales price for the iPhone 4.
AT&T's fully subsidized price is $199 for the 16GB and $299 for the 32GB plus applicable sales tax.
AT&T's full retail sales price if $599 for the 16GB and $699 for the 32GB plus applicable sales tax.
A $400 difference.

Similar Messages

HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
The SIM works on a different phone I tested it.
Any ideas?? TKS Sandro

“Could Not Activate EDGE” error message Update ...
Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
Thanks
Joe

I have 2 new email accounts added to my Imac. How do I get them to appear on the macbook and my iPhone. The computers are with maverick and the iPhone has the latest iOS 7.0.3. Thanks

I have added 2 new email accounts to my Imac. How do I get them to appear on my macbook pro and my iPhone. The computers are with maverick and the iPhone has the latest iOS 7.0.3. Thanks

Connect the device to the computer and iTunes and follow the instructions on this support document. http://support.apple.com/kb/HT1808

HT201263 Get three quarters of the way through recovery mode and then iphone goes back to "Connect to Itunes screen" can someone help please?

Get three quarters of the way through recovery mode and then iphone goes back to "Connect to Itunes screen" can someone help please?

Delete the .ipsw file on the computer.
Put the device in DFU mode.
Restore as new, once the restore completes, then try restoring from backup.

I have very thin, colored lines running vertical on my desktop monitor screen. I don't know where they come from or how to get rid of them. I started with one and now have three. Can anyone give me some insight about what to do in getting rid of them?

I have very thin, colored lines that have shown up on my IMac monitor screen. I don't know where they came from or how to get rid of them. I'm concerned now because I started with one and now have three. Does any know why this occurs or how to get rid of them?

I got an address from Applecare, although I can't place my hand on it right now. I didn't bother persuing the letter route myself as I didn't expect much. I know that the location was Cork, Ireland though as that where the UK Applecare is based as far as I'm aware. The best thing to do is to call Applecare (if it's free) and discuss the issue. State that you are not happy wit the fact that you will have to pay to have the problem resolved especiiay if it is an ongoing problem that has not been resolved. I ended up speaking to a senior manager of the Applecare team who then proceeded to tell me about mailing in my grievence to customer services division or something like that.
If I can find the address I may post it if I'm allowed.
In the case of age, Schools usually have a 5-year life-cycle as they tend to be used differently than consumer machines, i.e. being used constantly on a daily basis for at least 12 hours with no break. you would expect issues to appear after a few years, but I expect problems that arise through defects to be resolved and stay resolved. As I mentioned we had machines for around 2 years before the lines appeared and sent them to be repaired. I'm happy with that. What I am unhappy about is the fact that the problem has reappeared exactly in the same way and now I'm left with around 7 machines that I either pay loads to repair or, the more likely replace the machines with newer ones since the age is now big enough to warrant the replacement.
Sorry for the lengthy moan, but these are the reasons I purchased Apple ahrdware in the first place to avoid the "not our problem" stance some PC vendors usually take, similar to the Dell monitors thread mentioned in here somewhere.

Issue Using C# to Get RTF Text From Clipboard to Outlook With Formatting and Without Encoding Tags

I have created a little application that gathers data from various text boxes and then combines the data into a formatted richTextBox. A person using the tool asked if I could then add a button that would allow that text (with formatting) to be copied
and pasted into an Outlook Email. When I do this, I can get the text into an email, but I either strip out the formatting or I get all the RTF encoding tags to come along with it.
I have tested to see that the copy of the data from the richTextBox has indeed made it to the clipboard correctly. This has been verified by the fact that I can manually press "ctrl" + "v" and I can past the text with proper
formatting into the mail body.
I do know that I can brute force things by trying to manually wrap HTML tags around my textBox fields and then pipe that into an HTMLBody property. In fact I can get a lot of things to work with the HTMLBody property, but while it is nice that will
work, I feel that I must be missing something really simple while trying to work with RTF.
I currently am pasting (using the Clipboard.GetText(TestDataFormat.RTF)) the RTF data into the Body property of the mail item. This is bringing in all the RTF encoding tags. I have tried to paste this directly into the RTFBody of the mail item,
yet an execption gets thrown when executed. Oddly, though, if I change RTFBody to HTMLBody, I do not get the exception, but I still have the RTF encoding tags in it. Though if I feed the HTMLBody property straight, HTML text with the encoding tags,
it will render properly.
This has me confused then why if I feed HTMLBody HTML text with the encoding tags that it will render, but if I try and do the same for RTFBody and feed it RTF text with encoding tags it still throws an exception. Any help in the matter would be greatly
appreciated. I have included the code snippet below for sending the richTextBox information to the clipboard and then attempting to retrieve it and paste it into an Outlook email.
Thanks for the help.
Some pertinent information:
Blend for Visual Studio 2015 CTP6 (I switched from VS2012 as intellisense was added to Blend in 2015)
Because of this Systems.Windows.Forms is not in use
private void buttonEmail_Click(object sender, RoutedEventArgs e)
//Copy richTextBox information to Clipboard
Clipboard.Clear();
richTextBox.SelectAll();
richTextBox.Copy();
//Get current date to add to email subject line
DateTime myNewDate = new DateTime();
myNewDate = DateTime.Now;
//Create Email
Outlook.Application myNewApplication = new Outlook.Application();
Outlook.MailItem myNewMailIoI = myNewApplication.CreateItem(Outlook.OlItemType.olMailItem) as Outlook.MailItem;
myNewMailIoI.To = " "; //An attempt to ensure that the focus moves down to the body field
myNewMailIoI.Subject = "IoI - " + myNewDate.Date.ToString("d");
myNewMailIoI.BodyFormat = Outlook.OlBodyFormat.olFormatRichText;
//Pasting data into body of email
myNewMailIoI.Body = Clipboard.GetText(TextDataFormat.Rtf); //This will past the text with encoding tags into email
//If this section is uncommented, it will add a properly formatted HTML text to the email
//myNewMailIoI.BodyFormat = Outlook.OlBodyFormat.olFormatHTML;
//myNewMailIoI.HTMLBody = "This stinks!!!" + "different font and color";
myNewMailIoI.Display(); //Allow for window to be minimized
myNewMailIoI.Display(true);

Ok, I found the solution. Part of the issue was caused by the confusion of the HTML body property acting as a text encoder for HTML text when a string is passed in vs the RTF Body property needing to have a plain text file taken and encoded into a
byte stream. Even though the RTF text is in readable text (albeit with the RTF Encoding Tags) it needs to be reencoded into a series of bytes.
This is where I failed to understand the previous answers. I knew that RTF Body needed to have a array of bytes, and the previous answers seemed to indicate that the data in the clipboard was already in this byte format (this may have just been my
misunderstanding) and that I needed to somehow take this byte array and do something with it. My misunderstanding was that all the methods for getting values from the clipboard returned strings and not bytes.
after some digging last night and with the few hints that were offered before, I came across a post on CodeProject (apparently I cannot post links, so I will try and include this so that you can find the postcodeproject(DOTCOM)/Questions/766917/How-to-convert-richtextbox-output-into-bytearray).
This showed that I needed to take the raw, RTF text with its RTF encoding tags from the clipboard and and encode it to a byte array and then pass this into the RTF Body property. Included below is the final code such that I hope that it helps some other
person as there seem to be a lot of searches for this on the web, but not a lot of direct answers.
using System.Text;
using Outlook = Microsoft.Office.Interop.Outlook;
private void buttonEmail_Click(object sender, RoutedEventArgs e)
//Copy richTextBox information to Clipboard
Clipboard.Clear();
richTextBox.SelectAll();
richTextBox.Copy();
//Get current date to add to email subject line
DateTime myNewDate = new DateTime();
myNewDate = DateTime.Now;
//Create Email
Outlook.Application myNewApplication = new Outlook.Application();
Outlook.MailItem myNewMailIoI = myNewApplication.CreateItem(Outlook.OlItemType.olMailItem) as Outlook.MailItem;
//Add Subject
myNewMailIoI.Subject = "IoI - " + myNewDate.Date.ToString("d");
//Set Body Format to RTF
myNewMailIoI.BodyFormat = Outlook.OlBodyFormat.olFormatRichText;
//Converting RAW RTF data from string to bytes. THIS IS THE FIX THAT WAS NEEDED TO MAKE IT WORK
string myNewText = Clipboard.GetText(TextDataFormat.Rtf);
byte[] myNewRtfBytes = Encoding.UTF8.GetBytes(myNewText); //This line cost me way too many hours of lost sleep!!!
//Inserting RTF bytes into RTFBody property
myNewMailIoI.RTFBody = myNewRtfBytes;
myNewMailIoI.Display(); //Displays the newlycreated email
//If this section is uncommented, it will add a properly formatted HTML text to the email
//myNewMailIoI.BodyFormat = Outlook.OlBodyFormat.olFormatHTML;
//myNewMailIoI.HTMLBody = "This works for the HTMLbody property!!!" + "this renders properly";

HT4994 hello i have a blackberry bold and i have a contract with o2 and know i want a iphone so i have bought one but can you get your sim transfered onto an iphone 4 please thanks

hello i have an blackberry bold 9900 and i was wondering if i could get my contract with o2 transfered onto another sim for iphone 4

Go to an O2 location and they will be able to help you.
They should also be able to take any contacts, etc you
have on the blackberry and get them onto your iPhone.
Or call O2 to set up the new sim and do your own data
transfer.

HT3529 How can I get dictation for my iPad for use with email and messaging

How can I get dictation to use with messaging and email?

Apple's dictation requires Siri, which requires a 3rd or 4th generation iPad (or iPad Mini). See:
http://support.apple.com/kb/HT5457
Your post says you have a second generation iPad, so it will not have dictation.
There are third party apps available that might help you.

How can i get icloud to synch between outlook on my pc and my iphone 5?

I have loaded icloud on my PC and it's on my i5 phone. However, I can't get my calendar and contacts to synch between my PC and phone. Any suggestions?

Make sure to go into your icloud panel on your PC (in control panel) and on your phone (settings) and check everything you want to synch. Curious to know if this works for you as mine was working perfectly until last week.

How do i get my storm to work with att and how do i get my computer to reconize my blackberry

ok i have tried everything. is there a short cut or something. i can call and text and use the myspace and facebook. but i can not use the browser or get email. please i need some help. i am almost considering going back to a iphone

Which model Storm do you have, there are four (9500, 9520, 9530 and 9550)?
Check this thread I wrote on another forum for details instructions to get the Storm to working on ATT.
http://www.blackberryforums.com/general-9500-series-discussion-storm/180267-unlocked-storm-t-t-mobil...
It's a painstaking process, but it works. I've done it a hundred times.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Loaded 3.6.3 on Mac with 10.5.8 - no longer get printer recognition. Pinter is there with metwork and prints with Windows XPPro

using mac10.5.8, since loading 3.6.3 can no longer access printer. Even without ff running. Pinter is a network unit that works with Windows fine. Can't even reload printer driver.
== This happened ==
Every time Firefox opened
== First time FF 3.6.3 loaded

It may tell me that you are seeing the "popular" complaint about the intermittent MM behavior. Do google searches for "skipping magic mouse" or similar wording and you will get lots of hits.
One suggestion which some have claimed works is to stick a little ball of aluminum foil between the batteries and their contacts. The theory behind this is that not all batteries are created equal in the sense that the positive contact is slightly higher in some makes and not the others and that the ones with a shorter contact actually break contact due to the battery moving slightly in its compartment. So the al foil is to take up the gap.
I personally cannot say this theory is valid one way or another. I use rechargeable Sanyo Eneloops and they seem ok.

HT201210 I can not get the iphone to sync with itunes and the iphone locked up my ipad too. I have downloaded the recent itunes 10.6.3 and restarted my computer. What do I do?

My iphone was not synced when I received it. I plugged it in to charge it, and it locked up my ipad. My itunes was not updated on my desktop, so I just updated it to itunes 10.6.3. I have restarted my computer, and nothing is changing. I can not get the iphone to move from the screen, its stuck on the itunes icon. Help please.

I am downloading the 11.0.2 as we speak. I will update in a bit.

HT6154 hi, my iPhone 5 doesn't respond with touch screen. I went to Apple store they offer me new one, however I don't want to get new phone because my phone works with headphones and Suri. The problem it that my phone has passcode.

I just want to find out if I buy any keyboard dock would I be able to unlooked my phone since the screen doesnt respond?

Why do you not want a fully functional device? That seems really silly.

Should i change phone services and buy iphone, or get itouch?

I bought first ipod yesterday.

im guessing you got a classic and are wanting the wireless features of the itouch/iphone right?
its up to you to say what is worth it, i like being able to carry all in one but i still have my old 4th gen ipod because using my iphone in my car is a pain and doesnt give as good sound through the fm transmitter i have.
personally it was worth it for me but i cant say for you
pros and cons list time
-matt

I restored my iphone 5 on iTunes to unlock it and I got the congratulations you iPhone is unlocked but I still get the no service sign

I restored my iphone 5 on iTunes to unlock it and I got the congratulations you iPhone is unlocked but I still get the no service sign

Is there an active sim in the iPhone? Are you in an area where the
active sim has coverage?

Do I get rebate if I sign 2year contract with ATT and buy iphone 4?

Similar Messages

Maybe you are looking for