Do I have the USB Video Class (UVC) built-in driver on my Mac OS X 10.4?
I read on the Macam website that the Logitech QuickCam Pro 5000 is one of the webcams that will work with the USB Video Class (UVC) built-in driver found in Mac OS X 10.4.3 and later versions. I have a Mac OS X 10.4.11. I cant find the USB Video Class (UVC) built-in driver on my iMac, nor can I get the Logitech QuickCam Pro 5000 to work on it.(the downloadable macam software doesn't work with the webcam either.)
Do I have the USB Video Class (UVC) built-in driver on my Mac OS X 10.4.11?,and, if so, how do I get it to work with the webcam?
*"Do I have the USB Video Class (UVC) built-in driver on my Mac OS X 10.4.11?"*
yes
*" how do I get it to work with the webcam?"*
Plug in the camera
Similar Messages
-
I would really like to find out about this topic,hope someone has an answer for me. Fred
TOAST!
http://www.roxio.com/enu/products/toast/default.html?gclid=CIDu-MaizLACFQFeTAoda nEfWA
Ciao. -
USB Video Class Driver on Solaris 10 and Sun Ray
Hello,
Is it posible to use the USB Video Class Driver (usbvc) on Solaris 10 and Sun Ray?
How can I do that?
Thank you very much.It's not possible. The Video Class requires isochronous operation on USB and Sun Ray does not support isochronous mode.
Even if Sun Ray did support isochronous mode, the libusb library (which is what third-party applications use to interact with USB devices attached to Sun Ray) does not support isochronous transfers. The hard part is the Sun Ray itself. When that gets resolved it probably won't be very hard to add isoc support into libusb. -
Usb video class video vs built-in isight with adobe flash player
to get the built-in isight to work on the mac, one chooses usb video class video.
is it the same for linux?
or does linux call the driver 'built-in isight'?
is it different for different browsers?phillyb wrote:
to get the built-in isight to work on the mac, one chooses usb video class video.
is it the same for linux?
or does linux call the driver 'built-in isight'?
is it different for different browsers?
(1) Built-in iSight is ALWAYS a UVC device and external iSight is ALWAYS an IIDC device.
I do not see how any software, whether OS or browser, could change those facts.
However, I do not use Linux. Because you are concerned about using Flash for Linux,
it seems to me you need to find the correct version of Flash for the version of Linux you use:
http://get.adobe.com/flashplayer/otherversions/
When you have the correct version of Flash, you can check Flash Help for specifics:
http://www.macromedia.com/support/documentation/en/flashplayer/help/index.html
(2) Unless you get the specific answer you need here or in your Linux system documentation,
also check the documentation or support pages from the supplier of the Linux you use.
(3) Alternatively, you can search or post your question in a discussions forum dedicated
to your version of Linux.
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.4); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1 -
USB Video Class not showing up
Hey All,
I am trying to use some online websites that make use of the built-in iSight (Facebook, Chatroulette, etc), and my camera is not working. I know that in the flash player window that pops up you are supposed to select USB Video Class rather than built-in iSight, however the option for USB Video Class has disappeared. I have searched for USB Video Class driver but I have not been able to find one. Can anyone out there help me?
Thank you.bruin06 wrote:
Hey All,
I am trying to use some online websites that make use of the built-in iSight (Facebook, Chatroulette, etc), and my camera is not working. I know that in the flash player window that pops up you are supposed to select USB Video Class rather than built-in iSight, however the option for USB Video Class has disappeared. I have searched for USB Video Class driver but I have not been able to find one. Can anyone out there help me?
Thank you.
Welcome to Discussions, bruin06
Consider any of these ideas that are relevant to your system:
(1) For those who have installed Google plugins, user OysterOyster reports that uninstalling them restores proper iSight function with Flash and Mac OS X 10.6.5.
If Google is your problem, the GoogleVoiceAndVideoUninstaller.app should be in your hard drive's Library/Application Support/Google/ folder. (not your *Home > Library* folder)
Several users confirm that using the Google uninstaller works to restore Flash video functions.
Some other users, including those who do not use the Google plugins, have found other remedies.
(2) User joew13 reports that installing the 64-bit Flash plug-in beta for Mac OS X (DMG, 8.7 MB) fixed Flash sites for him.
This link allows download of the 64-bit plugin beta from an official Adobe page:
http://labs.adobe.com/downloads/flashplayer10.html
or, to download the beta directly, click this link--> http://tinyurl.com/2frejs4
Several other users have confirmed success after the beta update.
(3) User imagerle downgraded Flash to version 10,0,45,2 to restore Flash video.
If this older version is not available on a backup or an old install disk, it can be downloaded from Adobe's Archived Flash Players page:
http://kb2.adobe.com/cps/142/tn_14266.html
(4) User sirjoe82 and others have reported that uninstalling Flip4Mac restored their Flash video website functions.
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1 -
Can't see ipod videos from 60GB ipod classic. I have Apple USB/video cable running through Onkyo receiver into Samsung TV. Video & TV out settings seem correct-I can see album cover, but no video. Is it possible to get itunes music videos to play or do I need to get new ipod. It works on my iPad and iPhone, but not through iPod Classic.
Are these music videos located under Videos on your iPod? Do it play other regular movies (if you have any on the device)?
B-rock -
I have restored and updated my ipod from recovery mode, however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again? I have updated and restored 5 times! When connected to itunes it only shows the summary page saying ipod in recovery mode.
Fixed it!
1. Made sure itunes software was up to date
2. Pressed and held 'home' button and 'on-off' button at the same time for about 10 seconds till ipod reset (I hadn't done this step previously)
3. Connected to itunes
4. Pressed restore and update ipod
Update successful and ipod taken out of recovery mode -
I can't take a video in camera mode. I have the words video, camera and square down the right hand side of screen but cannot activate video? Any ideas?
Swipe up or down to select options.
-
i have an old apple 4s and have never backed it up (pictures and itunes). I have the usb plugged into my pc. what should i do next?
Hi Boulose,
Click on the device, and then on the Summary page to the right, click on Back up Now:
http://support.apple.com/kb/PH12325?viewlocale=en_US
Also, you are going to want to import your photos:
http://support.apple.com/kb/ht4083
Cheers,
GB -
I have the "Hanvon 5040 drawing tablet",it was working perfectly with mac till last month.As soon as i plug the USB of my tablet into my macbook pro the computer is blocked and an error apears: "you need to restart your computer..."nothing works.Any help?
Check with the manufacturer for updated drivers for your tablet.
-
Apple TV is blinking and requesting to connect cable with itunes, why? I do not have the USB cable since it doesn't come with the Apple TV .
Hello folks
I had the same problem today: Apple TV is blinking light and requesting to connect cable with Itunes (Itunes Logo appears)
I solved the problem according Alley_Cat mentioned and described in link bellow:
In my case, I restored factoring setting using a Micro USB Cable connected in Itunes
Follow the steps carefully described in link bellow
Good luck.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US -
I recently purchase an ipad2. I also have a mac laptop. Now, when I facetime call using my iphone to my ipad2 or mac, it states busy. how can i fix this problem? I have the same apple id e mail for both ipad2 and mac. it might be getting confuse now. I want to be able to face time also using my ipad2 to my laptop especially if one of the members of the family is traveling. Thanks.
thanks. your answer was correct, clearer. I have another question, maybe you can answer. I just purchase my ipad2 2 days ago. yesterday, there was a sound. today there is no sound. there is a sound only in movies and you tube and music. but no sound on all apps and keyboards. I look it up and seems like ther are few that have this problem. I called walmart coz I bought it there and they told me that they have not heard that before but if I can't fix it, just return it and exchange it with anew one since I have 14 days to do that. I tried rebooting it and still won't work. Should I just restore it?
-
I have the Creative suite 6 premium teacher edition installed on a mac and I want to install Premiere Pro and Photoshop ONLY on a separate macbook. How do i do this?
Get the CS6 installation file and when you run it on the separate machine choose to install only the programs you wish it to have.
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html -
When I connect my Leica digital camera to my iPad it will only download the photos not the videos. How can I download the videos anyone please?
If your camera has an SD memory card, use the camera connection kit & the SD card to download to the iPad. That's what I do.
Another way that will work. Download the video(s) to your computer. Then you can use a USB flash drive & the camera connection kit.
First, Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie file into the folder. The movie file must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie file should appear & you can import.
Cheers, Tom -
Have the flash video activate a function at the end of the movie
I have a movie that when it finishes playing I want a
function to happen.
It is a tutorial movie and I want to require the viewer to
watch the whole video before
they can click on the html to go to the next page. How do I
do that?
Thank you.Hi Nickterbeenan and Nickels55.
I very much appreciate the help, and I have looked over this
code, inserted the action script in the keyframe where the video
resides, but I'm at a loss at what part I change to enable a js
function to occur. Specifically, I want a "Next" button not to be
activated (functional) until the last frame of the video is played.
It looks like you have provided the code, but when Nichels55
states:
You can change this part of the code:
_level0.play(); gotoAndPlay("37");
to whatever you want to happen when the movie ends.
I'm not sure what part of that code I can change. I do have a
js coder on board with me. All I need to tell
him is where, how and what he puts in the code to make his js
do its magic.
Your help is much appreciated, thank you.
Michael
Maybe you are looking for
-
How can I sync my iPod Classic with iTunes 11.1.4 and Windows 7 64-bit?
After assistance from ‘b Noir’ (and losing--then finally regaining--my DVD/CD reader in the process), I finally installed the iTunes Version 11.1.4 update on my Windows 7 64-bit PC. So I am again able to import music from CDs, play music on my PC wi
-
I was working on my file and I had to force to quit. I forgot to save my file. now when I try to reopen the file I have this notice: "The document does not have a valid format." How can I recover my file?
-
Once more about "black" and "white" file lists.
Hello everyone! I've got a task to find all unauthorized executables on all workstations in domain. The good point is that workstations are identical to each other (both hard and soft), bad point is that I have to find the existence of this files on
-
HT4628 certain sites not working in france
i am in france. my wi-fi was working fine at my hotel. now when i navigate to certain sites (like facebook) it kicks me to a yahoo home page. other sites (like my gmail acct) work fine. ***? thanks.
-
JAEHYLEE (R11i AOL) Worklist를 home page에 추가 하고자할때
Goal Workflow Worklist를 Personalize를 통해서 자기 자신의 worklist에 추가하고자 할때 아래와 같은 Personalize를 통해서 가능하게 할수 있다 Solution 1) Oracle Applications 11.5.10 또는 11i.OWF.H (patch 3258819) 의 방법 Solution 1. Please set the following profile options for the user who perf