Do I have to activate AHCI mode on a Mountain Lion after a new SSD drive installation?
Hello All,
Do I have to activate AHCI mode on a Mountain Lion after a new SSD drive installation?
I have a new Corsair GT SSD sata 3 drive on my mack book, I have read on corsair web page that is good tho activate the AHCI and TRIM but I cant find information about how to do this on OS X.
Thank you all
That's information for non-Apple hardware. You can activate TRIM using third-party software: TRIM Enabler 2.2. However, most new SSDs should not need TRIM activated on the Mac.
Similar Messages
-
I have replaced my old hard drive with a new SSD drive. Can I restore a complete Time Machine backup
I have replaced my old hard drive on a MacBook Pro midyear 2010 with a new SSD drive. I have a complete system backup of my old drive in an external hard drive using Time Machine.
Questions that I would like to get answered.
1) Can I connect my external hard drive to the macbook pro and use that to boot up my machine by pressing and holding down the Options key? Once booted up successfully, can I use Disk Utility to format the new SSD and then restore the complete time machine backup?
2) If that is not possible, can I use my old drive which I can connect using a USB adapter and use that to boot up by following the same strategy as listed in Step#1 above?
3) If neither options are possible, do I need to use a bootable USB drive for Mavericks OS X to boot up the machine,
I have Mavericks OS X ( 10.9.6) and I do not have a DVD of the OS.
Any help is appreciated.Let me first document the steps that did not work and then I will document the steps that worked.
1) Replaced the hard drive with SSD.
2) Connected the original hard drive using a USB adapter to the MacBook to make it behave like an external device.
3) Powered on the machine and on hearing the chime pressed Command-R to start in recovery mode.
4) Chose the Disk Utility option to erase and format the SSD. The format chosen was Mac OS Extended Journaled.
5) Once the formatting was done, then clicked on the "Restore" tab in Disk Utility
6) In the Source field, dragged my original hard drive from the left pane and placed it in the field
7) On the destination field, choose the new SSD drive. Clicked on "Restore". Gave me a warning, accepted the warning and the restore was under way.
8) I had 236 GB to restore so took 3.5 hours before it was done.
9) Disconnected the external hard drive ( my original internal HDD), shut down the machine and powered on again.
10) Heard the chime and after that it was a white screen with no Apple logo.
Was visibly upset and started thinking what my next move will be. Then tried these steps
1) Again powered off the machine.
2) Connected my internal HDD once more as an external drive
3) Powered on and on hearing the chime, pressed Command-R as before
4) Once the OS X utilities screen popped up, this time chose Install OS X
5) Erased the contents of SSD once more and reformatted it using Mac OS Extended Journaled.
6) Installed OS X by following the prompts.
7) Once the OS was installed, I was presented with an option on how to transfer data to this new Mac
8) Chose the option to move the data from my original HDD.
9) Took another 3 hours to move the data.
10) Removed the original HDD once the transfer was complete, powered down the machine and started it once more.
11) Booted successfully and all my content is now accessible on the new SSD.
Moral of the story - It is the spirit that counts. -
Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair, I need to boot off of another source, like my flash drive. I am in Paris and my Snow Leopard DVD is in Texas.
Mac OS X has a built-in disk diagnostic and repair program called fsck or file system consistency check. Here’s how to verify and repair your startup disk with fsck. As soon as you hear the startup tone, press and hold Command-S on the keyboard. Keep holding down those keys until you see a black screen with white lettering. This is called “booting into Single User Mode.” As the Mac boots in this mode, the screen reports each step of the process. The line should end in root#. Right after the root# prompt, enter the following: /sbin/fsck -fy
If repairing the disk in single user mode fails, it means one of two things. Either your hard drive itself is failing (a hardware failure), or the directory damage on your hard drive is beyond the capability of the built-in repair procedures in OS X. -
Hiya... I can't get my iCloud mail account to activate on MacMini running OSX Mountain Lion 10.8.2.
Any thoughts?
Thanks
DanteanBe sure the mini is connected to icloud (system preference>icloud) and that you also have mail turned on. Then be sure the mail program has the icloud account defined in it's preferences.
-
HT1338 I have tried to updated my iMac with Mountain Lion.
HELP!! I have tried to updated my iMac with Mountain Lion, OS X 10,8,3 (12D78) to 10,8,4, it keeps asking me to restart to install the updates, having tried this 20 times the app still has update available and I just go round again. how can I get this to finish and update correctly
Try downloading the update from the Apple Downloads site. http://support.apple.com/kb/DL1658
Or, you might try booting into Safe Mode and try to install through App Store. http://support.apple.com/kb/ht1455 -
I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working. Adobe Acrobat has been a primary tool for accommodating memory problems after a brain injury. (A car ran me down while I was out getting exercise.) I installed the SSD because I needed my management of PDF files to run faster. I called tech support for help when the software first stopped working, but they needed me to give them a number from my original disks. Because of my disability, I've been having someone come in to clean, and the shelves where I kept my software packages were cleared. I've been hunting for them ever since, but I can't look for them myself for very long at a time. Today I finally found them, but now I can't seem to contact tech support. What happened? I don't want to delete my old files because I need the setup to remain unchanged, because I don't do well with changes. I think all I should need is to have someone located the license file on drive E: and move it to wherever it is needed on the SSD drive, but I don't know what to look for.
Tech support is not normally available on weekends. You should contact them as soon as the weekend passes and pick up where you left off with them.
-
My Macbook pro was stolen 09/12, the police just returned it to me. I want to remove all the data and start over. Format the drive's etc. I have windows 7 on 1 partion and mountain lion OSX on the apple partition. How is the best way to do this?
Have a look here...
what-to-do-when-your-hard-drive-is-full.html -
I have requested for free up gradation of mountain lion os. My mac meets all the eligibility standards. I applied it on 25th and haven't got any code till now. Pls help
After you press download, check your Launchpad. The icon will show up with what looks like a white dot where you'd expect to see a progress bar. That white dot actually is the progress bar, as ML is a 4GB download and can take anywhere from 1 to 15 hours, depending on your connection speed. On the average 1.5Mbps economy connection, it will take about 7 hours to download.
-
I have a MAC Pro from 2011 currently running MAC OS 10.9.5. This weekend I cloned the MAC HD drive to a new SSD drive for improved performance. The clone was completed successfully with no errors. After the clone completed I successfully restarted my system using the SSD as the boot device. I then successfully tested all of my products, including Photoshop CS6 and all of its plug-ins. I successfully tested the key features that I frequently use. Today while attempting to launch Photoshop CS6 a message is being displayed indicating that a scratch disk cannot be found. All drives are available on the system via the Finder and Disk Utility. I can access all drives including the old MAC HD which is no longer the boot device. I've even attempted to launch Photoshop from the old device yet the same error persist. Is there a way to review/edit/change Photoshop preferences if Photoshop doesn't launch? I've even restarted my system several times to see if that would resolve the issues. Does anyone have any recommendations for this issue? Have you previously address this issue?
Thank you Gregg WilliamsBoilerplate text:
Reset Preferences
http://forums.adobe.com/thread/375776
1) Close the program and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (not reversible)
or
2) Move the Folder. See:
http://www.bugge.com/Family-and-friends/Illy/illy.html
--OB -
I have seen so much response about the Mountain Lion update slowing down computers. I am updating from Mac OS x 10.6.8. What can I do to ensure the upgrade will go fine? Do I unplug my external hard drive before installing, or keep it plugged in?
Also, I have the 08 version of iWork. Will this cause problems for the update? Can I update this AFTER I update the processor?Welcome to Apple Support Communities
There's no reason to think that Mountain Lion will slow down your Mac. Just make a backup of your data before upgrading with Time Machine > http://support.apple.com/kb/HT1427
Also, check that your apps are compatible > http://www.roaringapps.com Upgrade them to a compatible version or delete them before upgrading.
The external drive won't make the OS X Mountain Lion installer fail, but it's better to unplug it during the upgrade.
iWork '08 is compatible with Mountain Lion. iWork '09 includes OS X Mountain Lion features and can be purchased at the Mac App Store.
To upgrade to OS X Mountain Lion, I recommend at least 4 GB of RAM. You can check how much memory you have in Apple menu > About this Mac -
i have tried to update the iPhoto in an iMac from 2010 ( in which i have updated the OS from SnowLeopard to Mountain Lion 10.8.3) but it doesnt work,why? Is my iPhoto too old to update do i have to buy and install a new version of i Photo ?
You may need to buy the newest version from the App Store. If you cannot update via the App Store then you are using the version from a DVD. Updates for that can be downloaded from support.apple.com/downloads/.
-
I have redeemed my code to download the Mountain Lion. I left it for download overnight. Now I am unable to find the download and its not installed. And the code says that its already redeemed so I cannot download the Mountain Lion again. Please help.
Look in your Applications folder.
-
I have mac book pro and recently bought mountain lion online, i then used bootcamp to upload windows 7 now i have no sound when i use windows what can i do to get sound.
Install the required Windows drivers: Boot Camp Support Software 5.0.5033. Download this link preferably from Windows. Otherwise, download onto a FAT formatted USB disk from which you can copy to your Windows system.
-
I have recently downloaded OS X Mountain Lion on my new MacBook Air.
I have recently downloaded OS X Mountain Lion on my new MacBook Air. I have Safari 6.0. I no longer see the "Empty Cache" option on the Safari drop down menu. Where did it go? How can I recover it?
GloriaSafari 6
Mountain Lion comes with Safari 6.
Apple removed "Empty Caches" from Safari menu.
1. Now clearing history clears caches and favicons.
2. Enable Develop menu.
Safari > Preferences > Advanced
At the bottom check the box "Show Develop menu in menu bar".
Develop menu will appear in menu bar.
Click Develop and from the dropdown select "Empty Caches".
Best. -
HT1455 can i use safari in safe mode to reinstall mountain lion
Can i use Safari in safe mode to reinstall mountain lion os?
Why not do it from the Recovery partition?
And, why are you posting this in the Snow Leopard forum?
Maybe you are looking for
-
Trying to download firefox on new computer there is not a download link on the firefox browser page
I have a new Dell computer using explorer to access firefox browser page to download firefox ... there is NOT a link to download firefox.
-
Can I get the screen on the iPhone 4S fixed if it was dropped and cracked? How much does it cost?
Can I get the screen fixed on the iPhone 4S if it was dropped and cracked? How much does it cost?
-
___Any tips for making this sign look real(er)? Ai and/or Ps
I'm trying to make this sign* look like an actual real sign (like a sign that would have neon type lettering, but turned off during the day), that would hang above a restaurant/bar in a cosmopolitan city. the client thinks it isn't 'real' lloking eno
-
I use Firefox 3.6.2 on a 2009 MAC Pro using OSX 10.6.5. Before upgrading to Firefox 3.6 I was able to configure Firefox 3.5 to reopen all the tabs which had been closed during exiting Firefox prior to reopening it. I am unable to configure Firefox 3.
-
OOB SharePoint 2010 redirection to different page
Hi, Could you please let me know if there is any Out of the Box option to rediret to a different page. Actually i wanted to apply a permission for a couple of pages which shows as a menu item in gloal navigation. However, the people who are supposed